Made of synthetic fibres and characterized by a relatively low resistance to airflow and a high dust holding capacity. F-Series is primarily designed as diffusion media for use as a final filter in the supply air stream of low velocity paint spray and drying booths.
Fibreglass
Developed for use in AAF Roll-O-Matic® Automatic Renewable Media Air Filters. Roll-O-Mat® has high fibre content and impregnated with AAF’s VISCOSINE® adhesive gel.
Fibreglass Fibreglass
Fibreglass
Fibreglass
Multiple Layer of Fine Mesh Expanded Aluminium Sheets with Both Side Galvanised Steel Faceguard Aluminium (Standard), Galvanised Steel or Stainless Steel
Constructed with AAF’s totally unitized, double wall moisture resistant die-cut beverage frame. The media pack is bonded inside the frame at all points and the pleat support grid is made from expanded metal. Typically used as a prefilter to prolong the life of higher efficiency filters. Available in a wide variety of grades. Available with antimicrobial.
Galvanised Steel
Galvanised Steel
Fibreglass Galvanised Steel Galvanised Steel
Fibreglass Galvanised Steel (Standard)
Made of layered synthetic media with plastic pleat spacer on both sides. Ideal for Variable Air Volume (VAV) systems. Available with plastic frame (NH) and galvanised steel frame (SH-DH).
Galvanised Steel, Plastic
Fibreglass
Fibreglass Galvanised Steel, Particle Board, MDF, Plywood
Fibreglass Galvanised Steel
Fibreglass
Fibreglass
Fibreglass
12”
Fibreglass Galvanised Steel
Primarily designed to remove airborne biological contaminants in hospitals critical areas and pharmaceutical and food processing plants. It also meets requirements of precision manufacturing operations and laboratories where very high efficiency on fine particulate matter is necessary.
Fibreglass Galvanised Steel, Particle Board, MDF, Plywood Aluminium
Fibreglass Galvanised Steel (Standard), Stainless Steel, Aluminium
Fibreglass Galvanised Steel (Standard), Aluminium, Stainless Steel, MDF, Plywood or Particle Board Aluminium
A family of mini-pleat HEPA and ULPA filters specifically designed for demanding airflow and particulate control requirements of cleanroom applications. Available with a variety of media packs configurations and classifications. Frames are available with gasket seal, gel seal, or knife-edge for fluid seal grids. Galvanised Steel (Standard), Fibreglass Aluminium
A family of mini-pleat HEPA and ULPA filters specifically designed for demanding airflow and particulate control requirements of cleanroom applications. Available with a variety of media packs configurations and classifications. Frames are available with gasket seal, gel seal, or knife-edge for fluid seal grids.
Fibreglass Aluminium
Aluminium
Fibreglass (Standard), PTFE Aluminium
Aluminium, Stainless Steel
CRU-II is a modular plenum gasket seal system, designed to provide unidirectional airflow completed with HEPA filters. The HEPA filter is located at the final position of the air stream and removable from the room side.
Aluminium
Fibreglass
Fibreglass Galvanised Steel, Aluminium Fibreglass
Fibreglass Galvanised Steel Aluminium
Fibreglass Aluminium Fibreglass
Can be used individually or arranged in any filter bank size using a combination of the available sizes. Standard units are manufactured in galvanised steel. Other materials are available.
Galvanised Steel (Standard), Stainless Steel
Can be used individually or arranged in any filter bank size using a combination of the available sizes. Standard units are manufactured in galvanised steel. Other materials are available.
A heavy-duty, rigidly constructed, automatic, renewable filter media system for use in a wide range of air-conditioning and ventilating systems in a commercial, public and industrial buildings. Consists of an upper dispensing unit to accommodate the media roll, a lower rewind unit with a drive motor and gear assembly to accept the used media. A built-in control unit advances the media from the dispensing unit into the effective filtration area when media is loaded with dirt. The media is automatically spooled into the rewind unit.
Fibreglass
The S-Trap L removes airborne particles by inertial separation and is normally self-cleaning.
Galvanised Steel (Standard), Stainless Steel
Permanent metal frames designed to contain replaceable filter media pads. The cell sides are made from a single piece of galvanised steel U-channel. Available in various sizes for air filtration application in the AHU.
Housing Height Number of Filter Element Arrestance Housing Material Dust Chute Special Size Available Other Optionals
998 - 2,496 cm 1 - 80 92% Galvanised Steel, Stainless Steel Centre, Left, Right, Both Sides Yes Secondary Fan, Control Panel, Manometer, Weather Hood, Support Legs
The S-Trap L removes airborne particles by inertial separation and is normally self-cleaning.
Galvanised Steel
Fibreglass
Housing Height Number of Filter Element Arrestance Housing Material Dust Chute Special Size Available Other Optionals
998 - 2,496 cm 1 - 80 92% Steel with Epoxy Coated, Stainless Steel Centre, Left, Right, Both Sides Yes Secondary Panel, Manometer, Weather Hood, Support Legs
Galvanised Steel with Epoxy
Galvanised Steel with Epoxy Coated (Standard),
AstroFan FFU,
HT Filter NM
Astro HT NM
AAF understands the vital importance of clean air. That’s why we are committed to cleaning the indoor air around the globe to improve our quality of life, increase productivity, protect critical processes and equipment, and create products that advance the human condition.
Proven Expertise of AAF AAF offers the most comprehensive air filtration portfolio in the industry, including particulate and gas-phase filters, to provide a customized clean air solution. Each product is carefully designed, manufactured, and tested in full compliance with all applicable standards to meet the most challenging demands with the lowest Total Cost of Ownership.
Sales Office: India & Middle East AAF India Pvt Ltd (Bangalore) Tel: +91 80 2783 9903 AAF India Pvt Ltd (Noida) Tel: +91 120 640 8278 AAF International Air Filtration Systems LLC (Dubai) Tel: +971 4 3397688 AAF Saudi Arabia Ltd (Riyadh) Tel: +96 611 265 1116 +96 611 265 2285
For enquiries email us at:
India: info@aafindia.net Middle East: info-me@aafintl.com
AAF has a policy of continuous product research and improvement and reserves the right to change design and specifications without notice.
11/2021
©2018 AAF
MAFP-99-2018A 08/18