sales@altparts.com
3 Types of Laser Cutting Machine Laser cutting has been in the market since decades now and has been updated a lot in these years. The lasers use a constant beam of light to create the heat and pressure to cut, mark, drill, or engrave the material. With the CNC machines, all the processes are stable and precise. There are different types of laser machines that have different ways to concentrate the light beam and different materials that can be used with it. They are CO2 Lasers, Fiber Lasers, and Crystal Lasers. The manufacturers suggest regular maintenance of these machines and usage of good quality spare parts. Thus, it is recommended to use trumpf laser consumables, amada laser consumables, etc. for quality parts. To know more about different types of lasers, keep reading.
CO2 Laser A CO2 laser uses a gas mixture of carbon dioxide, nitrogen, hydrogen, and helium to produce a light beam. The gas mixture is filled in a tube that contains mirrors on each ends. One of the mirrors in the tube is fully reflective and the other is partially reflective allowing some light to pass. The invisible light produced comes under the infrared range of the light spectrum. Usually the CO2 lasers are 25 to 100 watt in power and the wavelength is 10.6 micrometers. To enhance the power of the CO2 beam, oxygen content can be boosted. This can be risky if the machine is not suitable for such enhancements and the operator is new to this technique. The CO2 lasers are the best for non-metallic materials. This laser is commonly used for cutting or engraving wood, paper, leather, fabric, and acrylic plastics. The other important task to do is to maintain the laser machine. The regular maintenance helps in receiving the precise cuts. The regular change of consumables is the solution. You can easily find good quality trumpf laser consumables, amada laser consumables, etc. www.altparts.com