EN9 / C55 carbon steel

EN9 / C55 carbon steel:

EN9 carbon steel is a medium carbon metallic grade generally furnished within the as-rolled and forged circumstance It can be 몭ame or induction hardened to provide a excessive 몭oor hardness with awesome put on resistance for a carbon metallic grade.

Availability of EN9 bars in full lengths or can be cut according to customer requirements. EN9 carbon spherical, rolled round, forged round, rolled 몭at, forged 몭at, sheets and plates; bandsaw cut metal can be provided as per required sizes.

A몭oy

A L L O Y S T E E L & C A R B O N S T E E L P L A T E S R O U N D P L A T E S 

Carbon St몭l

Forms available in market:

Round bar.

Flat bar.

Heavy blocks

Heavy wall thickness pipe

Plates

Sheets

Strips

Chemical Composition of EN9/ C55 Steel :

The following below table shows the chemical composition of EN9 steel:

Forging Properties of EN9 Steel:

Preheat the component carefully, then raise the temperature to 1100°C for forging. Do not forge below 850°C. After forging cool slowly, preferably in a furnace.

Heat treatment of EN9 Steel:

Element Carbon (C) Silicon (Si) Manganesi u (Mn) Phosphoru s (P) Sulphur (S) Chromium (Cr) Content(%) 0 50-0 60 0 4 Max 0 50-0 80 0 035 Max 0 015-0 035 0 30 Max

Tempered the EN9 metallic element immediately after quenching even as nevertheless hand warm. Re-warmth to the tempering temperature then soak for one hour in keeping with 25 millimetre of overall thickness (2 hours minimum) Cool in air. For many applications tempering of EN9 will be between 550-660°C.

Hardening of EN9 Steel:

Carbon steel EN9 or 070M55 can be tempered at a heat of between 550°C to 660°C,heating for about 1 hour for every inch of thickness, then cool in oil or water.

Tempering OF EN9 Steel:

Quenching: Temper the EN9 steel metal component right away after quenching whilst still hand warm.

Tempering: Re-heat to the tempering temperature then soak for one hour according to 25 millimeters of general thickness .

Normalizing:For most applications tempering of EN9 could be among 550-660°C Then cooled in air.

EN9 SteelGrade speci몭cations : BS 970-1991:070M55

AISI/ASTM A29:1045,1050,1055,1060

DIN Werksto몭 No : 1 0535,1 1209

BS & DIN European:C45, CK45,C50,C55,CK55

JIS G4051: S45C, S50C,S55C

EN9 Steel Application:

EN9 is used usually for lots popular engineering packages Typical material consistsof, screws, shafts, bushes, axes, knives,sickles, crankshafts, woodworking drills, and hammers.

Forms of EN9 steel :

Strips – thickness 0.4mm to 4mm

Sheets – cold rolled sheets – thickness 0.4mm to 4mm

Sheets – hot rolled sheets – thickness 2.7mm to 12mm

Plates – thickness – 16mm to 150mm plates

Heavy plates – thickness – 16mm to 350mm plates

Forms of EN9 steel Round bar:

Rolled round bar – diameter 16mm to 250mm

Heavy forged round – diameter 200mm to 450mm

Heavy machined round – diameter 260mm to 620mm

Heavy ship shafts – diameter 450mm to 1000mm

Forms of EN9 steel Forged Gear blanks:

Forged gear blank- diameter 200mm to 1500mm

Thickness – 80mm to 350mm

Forms of EN9 steel Flat bar:

Flat bar/Rolled 몭at bar-thickness upto 50mm width upto 455mm

Forged 몭at bar-thickness upto 305mm and width upto 455mm

Forms of EN9 steel Blocks:

Machined blocks/ Bandsaw cut blocks-thickness upto 350mm

Forged blocks-thickness upto 400mm

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8D, EN8, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Sahar anpur,Gorakhpur,Noida, greater, Noida ,udham

nagar,Firozabad,Jhansi,Muza몭arnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadF ategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal ,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimp ur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghaz ipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad, Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan

,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur

City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara

,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

A2 STEEL/ PLASTIC MOULD STEEL/ AIR-HARDENING, MEDIUM-ALLOY, COLD-WORK STEELS:

/ About Us / ALLOY STEEL / ALLOY STEEL-EN19 / Blog

/ C45 /EN8 CARBON STEEL PLATE / C45 Carbon Steel / CARBON STEEL

/ CARBON STEEL PLATES/ SHEETS / FLAT BARS/ BLOCKS / CASE HARDENING STEEL

/ CASE HARDENING STEEL(EN353, 8620, 20MNCR5) / Contact

/ D2 Steel(1.2601, 1.2379)-Cold Die Steel / DB6 – Die block steel/ 1.2714 / DIE STEEL

/ EN24 ALLOY STEEL: / EN31 ALLOY STEEL\SAE 52100 Steel: / EN41B ALLOY STEEL

/ EN8 Steel / EN8D GRADE STEEL / EN9 / C55 carbon steel: / HCHCR-D3

/ HIGH SPEED STEEL / HOT DIE STEEL(H-13) / M2 tungsten-molybdenum High Speed Steel

/ M35-Molybdenum high speed tool steel

/ PLASTIC MOLD STEEL-(Grade 1.2738,P20+Ni,AISI P20+Ni)

/ PLASTIC MOLD STEEL-1.2311 Grade. / PLASTIC MOULD STEEL

/ STAVAX ESR/ 1.2083/ AISI 420 STEEL

   

Turn static files into dynamic content formats.

Create a flipbook