3-12 FUEL SYSTEM Choke Cable Choke Lever Free Play Inspection • Refer to the Choke Operation Inspection in the Periodic Maintenance chapter.
Choke Lever Free Play Adjustment • Refer to the Choke Operation Inspection in the Periodic Maintenance chapter.
Choke Cable Removal • Remove : Fuel Tank (see Fuel Tank Removal) Left Handle Cover (see Handle Cover Removal in the Frame chapter) Left Switch Housing
• Remove the carburetor from the holder (see Carburetor Removal) .
• Slide up the dust cover [A] . • Unscrew the choke cable plunger cap [B], and remove the choke cable with the plunger .
• Hold the choke plunger spring compressed, and free the •
choke cable lower end [A] from the plunger [B] . Pull the choke cable out of the frame .
Choke Cable Installation • Install the choke cable in accordance with the cable, Wire, and Hose Routing section in the Appendix chapter) .
• Install the choke cable and the plunger in the carburetor, • •
and tighten the plunger cap . Install the left switch housing (see Handlebar Installation in the Steering chapter) . After installation, adjust the cable properly (see Choke Operation Inspection in the Periodic Maintenance chapter) .
A WARNING Operation with incorrectly routed or improperly adjusted cables could result in an unsafe riding condition .
Choke Cable Lubrication • Refer to the Chassis Parts Lubrication Perform in the Periodic Maintenance chapter .