Four Steps of Operation 1 Turn on the instrument. Press and hold for 3 seconds, then release for start-up. Follow the prompts until the instrument reaches the Gas Readings screen. Check the battery to ensure it is fully charged.
BEFORE EACH DAY’S USE
2
3
4
Zero the instrument in fresh air.
Bump test the instrument.
Clear the peak readings.
Press
Press
Press ► to highlight the Sensor menu.
Press
to open the menu.
Press ► to highlight the Sensor menu. Press
to open the Sensor menu.
Press ▼ until the Zero All option is highlighted. View Sensor
Data
Zero All Press to 20.9 -1.6 0.0 Calibrate %vol o ppm ppm Bump Test start, and then CO O Peaks LEL CO2 follow the prompts 0 Sensors0 0.00 ppm Location %LEL %vol on the screen.
Press
to open the menu. to open the Sensor menu.
Press ▼until the Bump Test option is highlighted. Press to start, and then follow the prompts on the screen.
to open the menu.
Press ►to highlight the Sensor menu. Press
to open the Sensor menu.
Press ▼until the Peaks option is highlighted. View Sensor Data Press to view peaks.
Zero All 20.9 -1.6 0.0 Calibrate %vol o
CO O
0
ppm Bump Test Peaks LEL Sensors
0
ppm Location %LEL
ppm
CO2
0.00 %vol
15:09
15:07
Bump Test Zero All Sensors?
All Sensors?
OK OK
Distributed by: Air-Met Scientific Pty Ltd
Work with Confidence
Air-Met Sales/Service P: 1800 000 744 F: 1800 000 774 E: sales@airmet.com.au
Air-Met Rental P: 1300 137 067 E: hire@airmet.com.au W: www.airmet.com.au
The Gas Detection People
Press ►to highlight clear.
Cancel
Cancel
O2 0.0
NO2 150.0
H2S 416.4
CO 1500
LEL 0
CO2 0.75
OK
Apply 25.0 ppm H2S OK
Press and follow prompts on the screen.
Clear
Clear Sensor Peaks?
Cancel OK
INSTRUMENT IS READY TO USE www.indsci.com
Sensor Peaks
Cancel