Normativa / Standards ...........................................................................................pag

Normativa / Standards

Norme pubblicate e progetti in inchiesta (aggiornamento 27 giugno 2022)

Norme UNSIDER pubblicate da UNI nel mese di maggio 2022

UNI EN 15632-1:2022 Tubazioni per teleriscaldamento - Sistemi di tubazioni flessibili prodotti in fabbrica -

UNI EN ISO 16808:2022 Materiali metallici - Fogli e nastri - Determinazione della curva biassiale sforzo-deformazione per mezzo di test di rigonfiamento con sistemi di misurazione ottici

UNI EN 15632-2:2022 Tubazioni per teleriscaldamento - Sistemi di tubazioni flessibili prodotti in fabbrica - Parte 2: Sistemi di tubazioni bloccate con tubi di servizio in plastica; requisiti e metodi di prova ISO 4954:2022 Steels for cold heading and cold extruding

ISO/TR 4340:2022 Water aggressiveness evaluation and optimized lining choice

ISO 4298:2022 Manganese ores and concentrates — Determination of manganese content — Potentiometric method

ISO 3421:2022 Petroleum and natural gas industries — Drilling and production equipment — Offshore conductor design, setting depth and installation

Progetti UNSIDER messi allo studio dal CEN (Stage 10.99) – luglio 2022

Norme UNSIDER pubblicate da CEN e ISO nel mese di giugno 2022

ISO 23838:2022 Metallic materials — High strain rate torsion test at room temperature

ISO/TS 21913:2022 Temperature verification method applied to dynamic fatigue testing

ISO 19901-2:2022 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria ISO/TS 6084:2022 Steel and steel products — Vocabulary relating to chemical analysis

EN 1515-4:2021/prAC Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU

Progetti UNSIDER in inchiesta prEN e ISO/DIS – luglio 2022

prEN – progetti di norma europei

prEN ISO 19901-4 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical design considerations (ISO/DIS 19901-4:2022) prEN ISO 15551-1 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2022)

prEN ISO 683-17 Heat-treated steels, alloy steels and freecutting steels - Part 17: Ball and roller bearing steels (ISO/DIS 683-17:2022))

ISO/DIS – progetti di norma internazionali

ISO/DIS 19901-4 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical design considerations

ISO/DIS 15551 Petroleum and natural gas industries — Drilling and production equipment — Electric submersible pump systems for artificial lift

ISO/DIS 9649 Metallic materials — Wire — Reverse torsion test

ISO/DIS 6338 Method to calculate GHG emissions at LNG plant

ISO/DIS 4998 Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality

ISO/DIS 683-17 Heat-treatable steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels

ISO 404:2013/DAmd 1 Steel and steel products — General technical delivery requirements — Amendment 1

Progetti UNSIDER al voto FprEN e ISO/FDIS – luglio 2022

FprEN – progetti di norma europei

FprEN ISO 10113 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO/ FDIS 10113:2019)

ISO/FDIS – progetti di norma internazionali

ISO/FDIS 11531 Metallic materials — Sheet and strip — Earing test

12th International ROLLING Conference | Trieste (Italy), 26-28 October 2022

Organised by in cooperation with main sponsor silver sponsor

Thanks to a long and successful series, the ROLLING conferences have become the premier international event for rolling practitioners worldwide. The target audience embraces the whole metals rolling community: flat and long products rolling, hot and cold rolling and ferrous and nonferrous rolling. The forum will cover product and process topics, encompassing rolled product properties, quality and applications, in addition to the design, control and management of mill assets.

The Conference will bring together rolling practitioners, steel producers, plant designers and researchers and it will provide a forum for best practices and state-of-the-art technology. It will also take a look at developments in the foreseeable future.

BACKGROUND

1985 Tokyo, Japan 1987 Deauville, France 1990 London, UK 1994 Düsseldorf, Germany 1998 Tokyo, Japan 2002 Orlando, USA 2006 Paris, France 2010 Beijing, China 2013 Venice, Italy 2016 Graz, Austria 2019 São Paulo, Brazil

CONFERENCE SCHEDULE

October 26, 2022: Opening session and opening of the exhibition October 27, 2022: Session + Social event – Cocktail October 28, 2022: Sessions + Plant visit

CONFERENCE CHAIRMAN

Gianpietro Benedetti - DANIELI, Italy

INTERNATIONAL SCIENTIFIC & STEERING COMMITTEE

Lorenzo Angelini - Feralpi Group, Italy Wolfgang Bleck - Rwth Aachen University, Germany Franco Bonollo - Università di Padova, Italy Alberto Bregante - SMS Group, Italy Jochem Groot - Tata Steel, The Netherlands Gerhard Hirt - Rwth-Aachen, Germany Andreas Kugi - Technische Universität Wien, Austria Carlo Mapelli - Politecnico di Milano, Italy Pierre Montmitonnet - Mines Paris - Cemef, France Heinz Palkowski - Clausthal University of Technology, Germany Rolando Paolone - Danieli, Italy Marco Rinaldi - Danieli, Italy Jose M. Rodriguez-Ibabe - Ceit, Spain Ivo Schindler - Vsb-Technical University of Ostrava, Czech Republic Fulvio Siciliano - Federal Institute of Maranhao, Brazil Jilt Sietsma - Delft University of Technology, The Netherlands John G. Speer - USA Claudio Tomat - Danieli, Italy Giorgio Zuccaro - Acciaierie Venete, Italy

ORGANISING SECRETARIAT

Via Filippo Turati 8 – 20121 Milano, Italy Tel. +39 0276021132 – +39 0276397770 E-mail: aim@aimnet.it – http://www.aimnet.it