Solar edge products

STOREDGE TM

SolarEdge Single Phase StorEdgeTM Solutions for North America

12-25

SolarEdge StorEdge™ Solutions Benefits: More Energy - DC-coupled architecture stores PV power directly to the battery without AC conversion losses Simple Design & Installation - single inverter for both PV and storage backup and grid-tied applications Enhanced Safety - no high voltage or current during installation, maintenance or firefighting Full Visibility - monitor battery status, PV production, remaining backup power and self-consumption data

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.us

SolarEdge Single Phase StorEdgeTM Solutions for North America StorEdge™ Features: All-in-one solution uses a single DC optimized inverter to manage and monitor both PV generation and energy storage Backup power - automatically provides power to backed-up loads in the event of grid interruption Smart Energy Management - export control, time-of-use shifting, maximized self-consumption, demand response and peak shaving capabilities Controls third-party batteries such as the Tesla home battery, the Powerwall

PV

Grid

Power Optimizers

Backed-up Loads

Loads

Meter

DC Battery Pack

Inverter AC

AC

Cloud-based Monitoring Platform

Autotransformer

DC

AC

SolarEdge StorEdgeTM Solutions for North America - Product Selector Grid-tied solar, backup power and smart energy management Single Phase StorEdge™ Inverter Auto-transformer SolarEdge Electricity Meter Battery

Grid-tied solar and backup power

Grid-tied solar and smart energy management

SolarEdge Single Phase StorEdge Inverter for North America SE7600A-USS

Single inverter for PV, grid-tied storage and backup power Includes the hardware required to provide automatic backup power to backed-up loads in case of grid interruption Includes all interfaces needed for battery connection SE7600A-USS OUTPUT - AC (LOADS/GRID) Rated AC Power Output Max AC Power Output AC Output Voltage Min-Nom-Max (L-L)(1) AC Frequency Min-Nom-Max (1) Maximum Continuous Output Current @240V GFDI Utility Monitoring, Islanding Protection, Country Configurable Thresholds Charge Battery from AC (if Allowed) THD Power factor with rated power Typical Nighttime Power Consumption

7600 8350 211-240-264 59.3 - 60 - 60.5 32 1 Yes Yes <3 >0.99 (configurable; 0.9 leading to 0.9 lagging) <5

VA VA Vac Hz A A

5000 7600 for 10sec 211-240-264 105-120-132 55 - 60 - 65 21 25 1 Yes

VA VA Vac Vac Hz A A A

<5 0.2 leading to 0.2 lagging <2 <5

%

% W

OUTPUT - AC (BACKUP POWER)(2) Rated AC Power Output Max AC Power Output - Surge AC Output Voltage Min-Nom-Max (L-L) AC Output Voltage Min-Nom-Max (L-N) AC Frequency Min-Nom-Max Maximum Continuous Output Current @240V - Backup Mode Max Continuous Output Current per Phase @120V GFDI AC Circuit Breaker THD Power factor with rated power Automatic switchover time Typical Nighttime Power Consumption

sec W

INPUT - DC (PV and BATTERY) Transformer-less, Ungrounded Max Input Voltage Nom DC Input Voltage Reverse-Polarity Protection Ground-Fault Isolation Detection Maximum Inverter Effciency CEC Weighted Effciency

Yes 500 400 Yes 600k立 Sensitivity 98 97.5

Vdc Vdc

% %

INPUT - DC (PV) Maximum DC Power (STC) Max Input Current (3) 2-pole Disconnection

10250 23 Yes

W Adc

3300 1 8.5 Yes 12A (field replaceable)

W

INPUT - DC (BATTERY) Continuous Peak Power Number of Batteries per Inverter(4) Max Input Current 2-pole Disconnection DC Fuses on Plus and Minus

ADDITIONAL FEATURES Supported Communication Interfaces Battery Power Supply Revenue Grade Data, ANSI C12.1 Integrated AC, DC and Communication Connection Unit AC Disconnect Manual Inverter Bypass Switch DC Voltage Rapid Shutdown (PV and Battery) Auto-transformer thermal protection

RS485 for battery, RS485, Ethernet, ZigBee (optional) Yes, 12V / 53W Optional (5) Yes Yes Yes Yes, according to NEC 2014 690.12 Yes

Adc

SolarEdge Single Phase StorEdge Inverter for North America SE7600A-USS SE7600A-USS STANDARD COMPLIANCE (PENDING) Safety

UL1741, UL1699B, UL1998, CSA 22.2

Grid Connection Standards

IEEE1547, Rule 21, Rule 14

Emissions

FCC part15 class B

INSTALLATION SPECIFICATIONS AC Output (Loads/Grid) conduit size / AWG range

1” / 14-6 AWG

AC Output (Backup) conduit size / AWG range

0.75-1” knockouts / 14-6 AWG

AC Input (Auto-transformer) conduit size / AWG range

0.75-1” / 14-6 AWG

DC Input (PV) conduit size / AWG range

0.75” / 14-8 AWG

DC Input (Battery) conduit size / AWG range

0.75” / 16-10 AWG

Dimensions with Connection Unit (HxWxD)

37 x 12.5 x 7.2 / 940 x 315 x 184

in / mm

58.5 / 26.5

lb / kg

Weight with Connection Unit Cooling

Natural convection and internal fan (user replaceable)

Noise Min - Max Operating Temperature Protection Rating (1) (2) (3) (4) (5)

<50

dBA

-13 to +140 / -25 to +60

˚F / ˚C

NEMA 3R

For other regional settings please contact SolarEdge Support.

Not designed for standalone applications and requires AC for commissioning.

A higher current source may be used; the inverter will limit its input current to the values stated.

For more batteries per inverter contact SolarEdge.

Revenue grade inverter P/N: SE7600A-USS02NNG2.

Inverter Interface

SolarEdge Auto-transformer SEAUTO-TX-5000 SEAUTO-TX-5000 ELECTRICAL RATINGS Rated Power - Continuous Rated Power - Peak Output Voltage Max Continuous Output Current per Phase @120V Split Phase Imbalance (@Rated Power) Thermal Protection

5000

VA

7600 for 10sec

VA

120/240V Split Phase 25

A

Yes, up to 25A difference between phases Yes

INSTALLATION SPECIFICATIONS AC Output conduit size / AWG range Dimensions (HxWxD) Weight Min - Max Operating Temperature Protection Rating Installation

0.75” / 14-6 AWG 6.7 x 7.9 x 5.5 / 170 x 200 x 140

in / mm

29.7 / 13.5

lb / kg

-13 to +140 / -25 to +60

˚F / ˚C

NEMA 3R Wall mounted

SolarEdge Electricity Meter for North America SE-MTR240-2-200-S1 / SE-MTR240-2-400-S1 For meter specifications refer to: http://www.solaredge.us/files/pdfs/products/se_electricity_meter_na.pdf

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2016. V.01. Subject to change without notice.

For North America SE3000A-US / SE3800A-US / SE5000A-US / SE6000A-US / SE7600A-US / SE10000A-US / SE11400A-US

INVERTERS

SolarEdge Single Phase Inverters

12-25

The best choice for SolarEdge enabled systems

Integrated arc fault protection for NEC 2011 690.11 compliance Rapid shutdown for NEC 2014 690.12 Superior efficiency (98%) Small, lightweight and easy to install on provided bracket Built-in module-level monitoring Internet connection through Ethernet or Wireless Outdoor and indoor installation Fixed voltage inverter, DC/AC conversion only Pre-assembled Safety Switch for faster installation Optional – revenue grade data, ANSI C12.1

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.us

Single Phase Inverters for North America SE3000A-US / SE3800A-US / SE5000A-US / SE6000A-US / SE7600A-US / SE10000A-US / SE11400A-US

Nominal AC Power Output Max. AC Power Output AC Output Voltage Min.-Nom.-Max.(1) 183 - 208 - 229 Vac AC Output Voltage Min.-Nom.-Max.(1) 211 - 240 - 264 Vac AC Frequency Min.-Nom.-Max.(1) Max. Continuous Output Current

SE3800A-US

SE5000A-US

SE6000A-US

SE7600A-US

3000

3800

5000

6000

7600

3300

4150

5400 @ 208V 5450 @240V

6000

8350

-

-

3

-

-

3

-

3

3

3

3

3

3

3

12.5

16

24 @ 208V 21 @ 240V

32

48 @ 208V 42 @ 240V

47.5

13500

15350

33 @ 208V 30.5 @ 240V

W

Vdc Vdc

34.5

Adc

98

Adc

%

97.5

%

59.3 - 60 - 60.5 25

SE10000A- US 9980 @ 208V 10000 @240V 10800 @ 208V 10950 @240V

SE11400A-US

SE3000A-US

OUTPUT

11400

VA

12000

VA

Hz

GFDI Threshold 1 Utility Monitoring, Islanding Protection, Country Configurable Thresholds Yes

A A Yes

INPUT Maximum DC Power (STC) Transformer-less, Ungrounded Max. Input Voltage Nom. DC Input Voltage Max. Input Current(2)

4050

5100

9.5

13

Max. Input Short Circuit Current Reverse-Polarity Protection Ground-Fault Isolation Detection Maximum Inverter Efficiency

97.7

98.2

CEC Weighted Efficiency

97.5

98

Nighttime Power Consumption

6750

8100 10250 Yes 500 325 @ 208V / 350 @ 240V 16.5 @ 208V 18 23 15.5 @ 240V 45 Yes 600k Sensitivity 98.3 98.3 98 97 @ 208V 97.5 97.5 98 @ 240V < 2.5

98 97 @ 208V 97.5 @ 240V

<4

W

ADDITIONAL FEATURES Supported Communication Interfaces Revenue Grade Data, ANSI C12.1 Rapid Shutdown – NEC 2014 690.12

RS485, RS232, Ethernet, ZigBee (optional) Optional(3) Yes

STANDARD COMPLIANCE Safety Grid Connection Standards Emissions

UL1741, UL1699B, UL1998 , CSA 22.2 IEEE1547 FCC part15 class B

INSTALLATION SPECIFICATIONS AC output conduit size / AWG range DC input conduit size / # of strings / AWG range Dimensions with Safety Switch (HxWxD) Weight with Safety Switch Cooling

3/4” minimum / 16-6 AWG 3/4” minimum / 1-2 strings / 16-6 AWG 30.5 x 12.5 x 7.2 / 775 x 315 x 184 51.2 / 23.2

54.7 / 24.7 Natural Convection

Noise Min.-Max. Operating Temperature Range Protection Rating

< 25

Natural convection and internal fan (user replaceable)

3/4” minimum / 8-3 AWG 3/4” minimum / 1-3 strings / 14-6 AWG 30.5 x 12.5 x 10.5 / 775 x 315 x 260 88 .4 / 40.1

in / mm lb / kg

Fans (user replaceable)

< 50

-13 to +140 / -25 to +60 (-40 to +60 version available ) (4)

NEMA 3R

(1) For other regional settings please contact SolarEdge support.

(2) A higher current source may be used; the inverter will limit its input current to the values stated.

(3) Revenue grade inverter P/N: SExxxxA-US000NNR2 (for 7600W inverter:SE7600A-US002NNR2).

(4)

-40 version P/N: SExxxxA-US000NNU4 (for 7600W inverter:SE7600A-US002NNU4).

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2016. V.02. Subject to change without notice.

dBA ˚F / ˚C

SE9KUS / SE14.4KUS)

INVERTERS

SolarEdge Three Phase Inverters for the 208V Grid for North America

12-25

The best choice for SolarEdge enabled systems

Integrated arc fault protection for NEC 2011 690.11 Rapid shutdown for NEC 2014 690.12 Outdoor and indoor installation Built-in module-level monitoring Internet connection through Ethernet or Wireless Small, lightweight and easy to install on provided bracket Fixed voltage inverter, DC/AC conversion only Integrated Safety Switch

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.us

Three Phase Inverters for the 208V Grid for North America SE9KUS / SE14.4KUS(1) SE9KUS OUTPUT Rated AC Power Output Maximum AC Power Output AC Output Line Connections AC Output Voltage Minimum-NominalMaximum(2) (L-N) AC Output Voltage Minimum-NominalMaximum(2) (L-L) AC Frequency Min-Nom-Max(2) Max. Continuous Output Current (per Phase) GFDI Threshold Utility Monitoring, Islanding Protection, Country Configurable Set Points INPUT Maximum DC Power (Module STC) Transformer-less, Ungrounded Maximum Input Voltage DC to Gnd Maximum Input Voltage DC+ to DCNominal Input Voltage DC to Gnd Nominal Input Voltage DC+ to DCMaximum Input Current Max. Input Short Circuit Current Reverse-Polarity Protection Ground-Fault Isolation Detection CEC Weighted Effciency Night-time Power Consumption ADDITIONAL FEATURES Supported Communication Interfaces Rapid Shutdown – NEC 2014 690.12 STANDARD COMPLIANCE Safety Grid Connection Standards Emissions INSTALLATION SPECIFICATIONS AC output conduit size / AWG range DC input conduit size / AWG range Number of DC inputs Dimensions (HxWxD) Dimensions with Safety Switch (HxWxD) Weight Weight with Safety Switch Cooling Noise Operating Temperature Range Protection Rating

SE14.4KUS

9000 14400 9000 14400 4-wire WYE (L1-L2-L3-N) plus PE or 3 wire Delta

VA VA

105-120-132.5

Vac

183-208-229

Vac

59.3 - 60 - 60.5 1

Hz A A

Yes

25

40

12150

19400 Yes

250 500

300 600 200 400

26.5

38 45 Yes 1MΩ Sensitivity

96.5 <3

97 <4

W

Vdc Vdc Vdc Vdc Adc Adc

% W

RS485, Ethernet, ZigBee (optional) With installation of rapid shutdown kit(3) UL1741, UL1699B, UL1998, CSA 22.2 IEEE1547 FCC part15 class B 3/4” minimum / 12-6 AWG 3/4” minimum / 12-6 AWG 2 pairs 3 pairs (with fuses on plus & minus)(4) 21 x 12.5 x 10.5 / 540 x 315 x 260 30.5 x 12.5 x 10.5 / 775 x 315 x 260 73.2 / 33.2 99.5 / 45 79.7 / 36.2 106 / 48 Fans (user replaceable) < 50 < 55 -40 to +140 / -40 to +60 NEMA 3R

(1)

For 277/480V inverters refer to: http://www.solaredge.com/files/pdfs/products/inverters/se-three-phase-us-inverter-datasheet.pdf For other regional settings please contact SolarEdge support.

Rapid shutdown kit P/N: contact SolarEdge.

(4) Field replacement kit for 1 pair of inputs P/N: DCD-3PH-1TBK. (2) (3)

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 06/2015. V.01. Subject to change without notice.

in/mm in/mm

dBA ˚F/˚C

SE10KUS / SE20KUS / SE33.3KUS )

INVERTERS

SolarEdge Three Phase Inverters for the 277/480V Grid for North America

12-25

The best choice for SolarEdge enabled systems

Integrated arc fault protection for NEC 2011 690.11 Rapid shutdown for NEC 2014 690.12 Superior efficiency (98.5%) Outdoor and indoor installation Built-in module-level monitoring Internet connection through Ethernet or Wireless Small, lightweight and easy to install on provided bracket Fixed voltage inverter, DC/AC conversion only Integrated Safety Switch and DC fuses (plus & minus)

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.us

Three Phase Inverters for the 277/480V Grid for North America SE10KUS / SE20KUS / SE33.3KUS(1)

OUTPUT Rated AC Power Output Maximum AC Power Output AC Output Line Connections AC Output Voltage Minimum-Nominal-Maximum(2) (L-N) AC Output Voltage Minimum-Nominal-Maximum(2) (L-L) AC Frequency Min-Nom-Max(2) Max. Continuous Output Current (per Phase) GFDI Threshold Utility Monitoring, Islanding Protection, Country Configurable Set Points INPUT Maximum DC Power (Module STC) Transformer-less, Ungrounded Maximum Input Voltage DC to Gnd Maximum Input Voltage DC+ to DCNominal Input Voltage DC to Gnd Nominal Input Voltage DC+ to DCMaximum Input Current Max. Input Short Circuit Current Reverse-Polarity Protection Ground-Fault Isolation Detection CEC Weighted Effciency Night-time Power Consumption ADDITIONAL FEATURES Supported Communication Interfaces Rapid Shutdown – NEC 2014 690.12 STANDARD COMPLIANCE Safety Grid Connection Standards Emissions INSTALLATION SPECIFICATIONS AC output conduit size / AWG range DC input conduit size / AWG range Number of DC inputs Dimensions (HxWxD) Dimensions with Safety Switch (HxWxD) Weight Weight with Safety Switch Cooling Noise Operating Temperature Range Protection Rating

SE10KUS

SE20KUS

SE33.3KUS

10000 10000

20000 20000 4-wire WYE (L1-L2-L3-N) plus PE 244-277-305 422.5-480-529 59.3 - 60 - 60.5 24 1

33300 33300

12

40

Yes 13500

27000 Yes 490 980 425 850 26.5 45 Yes 1MΩ Sensitivity

13.5

98 <3

VA VA Vac Vac Hz A A

45000

40

98.5 <4

W

Vdc Vdc Vdc Vdc Adc Adc

% W

RS485, Ethernet, ZigBee (optional) With installation of rapid shutdown kit(3) UL1741, UL1699B, UL1998, CSA 22.2 IEEE1547 FCC part15 class B

3/4” minimum / 12-6 AWG 3/4” minimum / 12-6 AWG 3 pairs (with fuses on plus & minus)(4) 21 x 12.5 x 10.5 / 540 x 315 x 260 in/mm 30.5 x 12.5 x 10.5 / 775 x 315 x 260 in/mm 73.2 / 33.2 99.5 / 45 lb/kg 79.7 / 36.2 106 / 48 lb/kg Fans (user replaceable) < 50 < 55 dBA -40 to +140 / -40 to +60 ˚F/˚C NEMA 3R 2 pairs

(1)

For 208V inverters refer to: http://www.solaredge.com/files/pdfs/products/inverters/se-three-phase-us-inverter-208V-datasheet.pdf For other regional settings please contact SolarEdge support.

Rapid shutdown kit P/N: contact SolarEdge.

(4) Field replacement kit for 1 pair of inputs P/N: DCD-3PH-1TBK. (2) (3)

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 10/2015. V.01. Subject to change without notice.

Module Add-On For North America P300 / P320 / P400 / P405

POWER OPTIMIZER

SolarEdge Power Optimizer

PV power optimization at the module-level

Up to 25% more energy Superior efficiency (99.5%) Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading Flexible system design for maximum space utilization Fast installation with a single bolt Next generation maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety

USA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.us

SolarEdge Power Optimizer Module Add-On for North America P300 / P320 / P400 / P405 P320

P300

(for 60-cell modules)

P400

(for high-power 60-cell modules)

(for 72 & 96-cell modules)

P405

(for thin film modules)

INPUT Rated Input DC Power(1) 300 320 400 405 W Absolute Maximum Input Voltage 48 80 125 Vdc (Voc at lowest temperature) MPPT Operating Range 8 - 48 8 - 80 12.5 - 105 Vdc Maximum Short Circuit Current (Isc) 10 11 10.1 Adc Maximum DC Input Current 12.5 13.75 12.63 Adc Maximum Efficiency 99.5 % Weighted Efficiency 98.8 % Overvoltage Category II OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) Maximum Output Current 15 Adc Maximum Output Voltage 60 85 Vdc OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) Safety Output Voltage per Power 1 Vdc Optimizer STANDARD COMPLIANCE EMC FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 Safety IEC62109-1 (class II safety), UL1741 RoHS Yes INSTALLATION SPECIFICATIONS Maximum Allowed System Voltage 1000 Vdc Compatible inverters All SolarEdge Single Phase and Three Phase inverters 128 x 152 x 27.5 / 128 x 152 x 35 / 128 x 152 x 50 / Dimensions (W x L x H) mm / in 5 x 5.97 x 1.08 5 x 5.97 x 1.37 5 x 5.97 x 1.96 Weight (including cables) 760 / 1.7 830 / 1.8 1064 / 2.3 gr / lb Input Connector MC4 Compatible Output Wire Type / Connector Double Insulated; MC4 Compatible Output Wire Length 0.95 / 3.0 1.2 / 3.9 m / ft Operating Temperature Range -40 - +85 / -40 - +185 ˚C / ˚F Protection Rating IP68 / NEMA6P Relative Humidity 0 - 100 % (1)

Rated STC power of the module. Module of up to +5% power tolerance allowed.

PV SYSTEM DESIGN USING A SOLAREDGE INVERTER(2) Minimum String Length (Power Optimizers) Maximum String Length (Power Optimizers) Maximum Power per String Parallel Strings of Different Lengths or Orientations (2)

SINGLE PHASE

THREE PHASE 208V

THREE PHASE 480V

8

10

18

25

25

50

5250

6000

12750

Yes

It is not allowed to mix P405 with P300/P400/P600/P700 in one string.

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 12/2015 V.01. Subject to change without notice.

W

POWER OPTIMIZER

SolarEdge Power Optimizer Module Add-On for Commercial Installations for North America P600 / P700

PV power optimization at the module-level The most cost effective solution for commercial and large field installations Up to 25% more energy Superior efficiency (99.5%) Balance of System cost reduction; 50% less cables, fuses and combiner boxes, over 2x longer string lengths possible Fast installation with a single bolt Next generation maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety Use with two PV modules connected in series USA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.us

SolarEdge Power Optimizer Module Add-On For Commercial Installations for North America P600 / P700 P600

P700

(for 2 x 60-cell PV modules)

(for 2 x 72-cell PV modules)

INPUT Rated Input DC Power(1) 600 700 W Absolute Maximum Input Voltage 96 125 Vdc (Voc at lowest temperature) MPPT Operating Range 12.5 - 80 12.5 - 105 Vdc Maximum Short Circuit Current (Isc) 10.1 Adc Maximum DC Input Current 12.63 Adc Maximum Efficiency 99.5 % Weighted Efficiency 98.6 % Overvoltage Category II OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) Maximum Output Current 15 Adc Maximum Output Voltage 85 Vdc OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) Safety Output Voltage per Power Optimizer 1 Vdc STANDARD COMPLIANCE EMC FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 Safety IEC62109-1 (class II safety), UL1741 RoHS Yes INSTALLATION SPECIFICATIONS Compatible SolarEdge Inverters Three phase inverters Vdc Maximum Allowed System Voltage 1000 Dimensions (W x L x H) 128 x 152 x 43 / 5 x 5.97 x 1.69 128 x 152 x 50 / 5 x 5.97 x 1.96 mm / in Weight (including cables) 994 / 2.2 1064 / 2.34 gr / lb Input Connector MC4 Compatible Output Wire Type / Connector Double Insulated; MC4 Compatible Output Wire Length 1.8 / 5.9 2.1 / 6.89 m / ft Operating Temperature Range(2) -40 - +85 / -40 - +185 ˚C / ˚F Protection Rating IP68 / NEMA6P Relative Humidity 0 - 100 % (1) 2)

Rated combined STC power of 2 modules connected in series. Module of up to +5% power tolerance allowed.

For ambient temperature above +70˚C / +158˚F power de-rating is applied. Refer to Power Optimizers Temperature De-Rating Application Note for more details.

PV SYSTEM DESIGN USING A SOLAREDGE INVERTER(3)(4) Compatible Power Optimizers Minimum String Length Maximum String Length

Power Optimizers PV Modules Power Optimizers PV Modules

Maximum Power per String Parallel Strings of Different Lengths or Orientations

THREE PHASE 208V

THREE PHASE 480V

P600 & P700(5) 8 16 30 60 6000(6)

P600 & P700 13 26 30 60 12750(7)

(3)

Yes

P600 and P700 can be mixed in one string. It is not allowed to mix P600/P700 with P300/P320/P400/P405 in one string.

In a case of odd number of PV Modules in one string it is allowed to install one P600/P700 power optimizer connected to one PV Module.

P700 design with three phase 208V inverters is limited. Use the SolarEdge Site Designer for verification.

(6) For SE14.4KUS-208: It is allowed to install up to 6,500W per string when 3 strings are connected to the inverter and when the maximum power difference between the strings is up to 1,000W. (7) For SE33.3KUS: It is allowed to install up to 15,000W per string when 3 strings are connected to the inverter and when the maximum power difference between the strings is up to 2,000W. (4) (5)

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 02/2016. V.01. Subject to change without notice.

W

For Power Optimizer Input SE-CBY

ACCESSORIES

Branch-Cable

Ideal solution for low power modules

Allows to connect 2-4 modules in parallel to a single power optimizer Utilize power optimizers to their full power rating Double insulated PV wire Multi-contact MC4 connectors

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - ISRAEL

www.solaredge.com

Branch-Cable For Power Optimizer Input SE-CBY

2-Module Branch Cable Part number: SE-CBY-2MM (20 male units & 20 female units in each package)

5 cm 5 cm

5 cm

3-Module Branch Cable Part number: SE-CBY-3MM (10 male units & 10 female units in each package) 26 cm 8.5 cm

26 cm 66 cm

66 cm

4-Module Branch Cable

21 cm

Part number: SE-CBY-4MM (10 male units+ 10 female units in each package)

66 cm

20 cm 8.5 cm

20 cm

66 cm

CONNECTOR Input Connector Output Connector

Multi-contact MC4 Multi-contact MC4

WIRE Maximum System Voltage Maximum Current Wire Size Rated Temperature

600 (UL) / 1000 (IEC) 30 4 -40 – 90

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 07/2014. V.01. Subject to change without notice.

Vdc A mm2 °C

North America SE1000-CDMA2005

COMMUNICATION

SolarEdge Cellular CDMA Kit

Cellular Internet Connectivity

Connects SolarEdge inverters wirelessly to the Internet No need for Internet infrastructure at site Installed within the inverter enclosure for outdoor resilience Enables remote analysis and troubleshooting Comprehensive coverage in the US Immediate monitoring connection feedback

* For a detailed coverage map refer to the following link and select the 1x Coverage option: http://www.showmycoverage.com/mycoverage.jsp?id=AER789IS

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - ISRAEL - AUSTRALIA

www.solaredge.us

SolarEdge Cellular CDMA Kit North America

SE1000-CDMA2005 SE1000-CDMA2005

UNIT

FUNCTIONAL Number of Inverters Monitored with a Single CDMA Kit Data Sampling Rate Data Upload Rate

1 15 minutes Every four hours

Data Plan

5 year prepaid plan (non-extendable*)

Supported by Inverter Firmware

CPU v3.12xx and above

RF PERFORMANCE Operating Frequency Min.-Max. CDMA 800

Modem transmit: 824-849, Modem receive: 869-894

MHz

Operating Frequency Min.-Max. CDMA 1900

Modem transmit: 1850-1910, Modem receive:1930-1990

MHz

Antenna Connector

RP-SMA

Maximum transmit power Receiver Input Sensitivity (Forward Link RF Level @ FER < 0.5 %)

24

dBm

Typ. -107, Min. -106

dBm

STANDARD COMPLIANCE Safety

cUL, UL60950

Emissions and Radio

FCC parts 15, 22, 24 class B, Industry Canada (IC): ICES-003, RSS-102

INSTALLATION SPECIFICATION Dimensions (L x W)

3.55 x 1.35 / 90.5 x 34.5

in/mm

Operating Temperature

-40 to +185 / -40 to +85

°F/°C

* New CDMA Kit can be purchased when the plan expires

Cellular Tower

Inverter

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 10/2015. V.01. Subject to change without notice.

SolarEdge Portal

COMMUNICATION

SolarEdge RS485 Expansion Kit for North America SE1000-RS485-IF-NA

Expanding Wired Connectivity

Provides an additional RS485 port for enhanced communications Located within the inverter enclosure for outdoor protection Suitable for installation in the SolarEdge Control and Communication Gateway Reduces labor cost with simple and quick installation Allows daisy chain configuration of multiple RS485 buses for communications in commercial installations

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.us

SolarEdge RS485 Expansion Kit for North America

SE1000-RS485-IF-NA SE1000-RS485-IF-NA

UNIT

FUNCTIONAL Maximum number of slave inverters connected on the RS485 bus

31

Maximum number of interconnected RS485 buses

16

Maximum number of Smart Energy Management devices on the RS485 bus

Up to 1 Battery; Up to 2 Meters

Maximum RS485 cable length

3300

ft

1.3 x 1

inch

-40 to 185

°F

INSTALLATION SPECIFICATIONS Dimensions (L x W) Operating Temperature

Connecting a multiple inverter system to external devices

Inverter

Inverter

Inverter

RS485-E RS485-1

RS485-1

Electricity meter Ethernet Router

Internet

Monitoring Portal

Connecting large commercial installations #1

Bus #1

Inverter

#2

#32

Inverter

Inverter Slave

Slave

Slave

Master

RS485-1 #1

Bus #2

Inverter

RS485-E #2

#32

Inverter

Inverter Slave

Slave

Slave

Master

RS485-1 #1

Bus #16

Inverter

RS485-E #2

#32

Inverter

Inverter Slave

Slave RS485-1

Master

Master RS485-E Ethernet Router

Š SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 08/2015. V.01. Subject to change without notice.

Internet

Monitoring Portal

SE1000-CCG-G

COMMUNICATION

SolarEdge Control and Communication Gateway

All-in-one communication gateway

Wireless connections Environmental sensors support Power reduction interface Electricity meter reader Non-SolarEdge inverter data loggers Easy installation - DIN rail and wall mount

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - ISRAEL

www.solaredge.us

SolarEdge Control and Communication Gateway SE1000-CCG-G POWER Power Supply - Wall Mount

Included, 100-240VAC, EU/UK/US/AU interchangeable, 2-pin plug

Supply Voltage

9-14

Connector Type

terminal block

Power Consumption

Vdc

<2

W

ANALOG SENSOR INPUT Number of Inputs

3 Range

Input 1

Accuracy

Resolution

+/- 1% f.s

10 bit

0-30mV or 0-2V

Input 2

0-2V or 0-10V

Input 3

-20mA – 20mA

COMMUNICATION INTERFACES Ethernet Interface Wireless Connections Power Reduction Interface RS232 Interface

10/100-BaseT ZigBee module (*) 4 control pins, 5V, GND For local connection

SUPPORTED RS485 DEVICES (a) SolarEdge Devices

Yes

Export Inverter Data

Yes

Revenue meters

Yes

Export Data to Non-SolarEdge Logger

Yes

ENVIRONMENTAL Operating Temperatures Protection Rating

-20 to 60 / -4 to 140

°C / °F

IP20 Indoor

MECHANICAL Mounting Type Dimensions (LxWxH) Weight

DIN Rail / Wall mount 161.6 X 90 X 62 / 6.36 x 3.54 x 2.44

mm / Inch

0.5 / 1.1

kg / lbs

STANDARD COMPLIANCE Safety EMC

UL60950-1, IEC-60950-1 FCC Part 15 class B, IEC61000-6-2, IEC61000-6-3

(a) for supported protocols and devices, see link http://www.solaredge.com/files/pdfs/se-gateway-supported-devices.pdf (*) sold separately - see individual product specs for supported locations

SolarEdge Control and Communication Gateway SE1000-CCG-G CONNECTION SCENARIOS

Slave

Slave

Slave

Slave

Example 1

SE Gateway Master

Extend the Distance of Wired Connection RS485

RS485

SolarEdge Portal

RS485

RS485 (up to 1km)

ETH Ethernet Router

Slave

Slave

Slave

Slave

Example 2 Non-SolarEdge Logger & SE Monitoring Parallel Connection

SolarEdge Portal

SE Gateway Master ETH RS485

RS485

RS485

Ethernet Router

RS485

RS485 Non-SolarEdge Logger

Home Gateway

Example 3 ZigBee Wireless Server Connection

SolarEdge Portal Slave

Slave

Slave

Slave

Master

Ethernet ETH Ethernet Router

SolarEdge Control and Communication Gateway SE1000-CCG-G CONNECTION SCENARIOS

Slave

Slave

Slave

Slave

SE Gateway Master

Example 4 RS485

RS485

SolarEdge Portal

RS485

Power Reduction Interface (PRI) Connection

ETH

RS485

Ethernet Router 4 control, 5V, GND

Slave

Slave

Slave

Slave

SE Gateway Master SolarEdge Portal

Example 5 Analog Sensors Connection

ETH

RS485

Ambient Temperature Sensor

Slave

Ethernet Router

Module Temperature Sensor

Slave

Slave

Irradiance Sensor

Slave

SE Gateway Master

Example 6 RS485

RS485

SolarEdge Portal

RS485

Electricity Connection RS485

ETH

Ethernet Router RS485

Electricity Meter

Š SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 12/2014. V.01. Subject to change without notice.

SE1000-CCG-F

Communication

SolarEdge Firefighter Gateway

Central safety management for SolarEdge system

Manual & Automatic system DC Shutdown Real time indication of system DC voltage for safety assurance Emergency stop button for the entire PV system Notification to SolarEdge monitoring portal on system shutdown Easy installation - DIN rail and wall mount

USA - Germany - Italy - France - Japan - China - Israel - Australia

www.solaredge.us

SolarEdge Firefighter Gateway SE1000-CCG-F POWER Power Supply - DIN Rail

Included, 100-240VAC, EU/UK/US/AU interchangeable, 2-pin plug

Supply Voltage

9-14

Connector Type

terminal block

Power Consumption

<2

Vdc W

COMMUNICATION Interfaces Ethernet Interface

10/100-BaseT

Wireless Connections

ZigBee module (*), GSM (*) (**)

Fire Alarm Control Panel Interface

2 alarm inputs, 5V, GND (***)

SolarEdge Inverters

RS485

ENVIRONMENTAL Operating Temperatures

-20 to 60 / -4 to 140

Protection Rating

°C / °F

IP20 Indoor

Mechanical Mounting Type

DIN Rail / Wall mount

Dimensions (L x W x H)

161.6 X 90 X 62 / 6.36 x 3.54 x 2.44

mm / Inch

0.5 / 1.1

kg / lbs

Weight

Standard COMPLIANCE Safety

UL60950-1, IEC-60950-1

EMC

FCC Part 15 class B, IEC61000-6-2, IEC61000-6-3

(*) Sold separately - see individual product specs for supported locations (**) EU only (***) Emergency stop button is not supplied by SolarEdge

Firefighter Gateway

RS485

RS485

Emergency Stop Button

RS485

RS485 (up to 1Km)

Fire Alarm Control Panel

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 12/2013. V.01. Subject to change without notice.

ACCESSORIES

Environmental Sensors SE1000-SEN-IRR-S1 / SE1000-SEN-TAMB-S2 SE1000-SEN-TMOD-S2 / SE1000-SEN-WIND-S1

Ambient Tempera­ture sensor Direct Irradiance sensor Wind Velocity sensor

Module Temperature sensor

Environmental Monitoring of your SolarEdge System Connect environmental sensors to the SolarEdge Control and Communication Gateway for monitoring of your site Used to calculate site performance ratio Irradiance, temperature and wind measurments

USA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.com

Environmental Sensors

SE1000-SEN-IRR-S1 / SE1000-SEN-TAMB-S2 / SE1000-SEN-TMOD-S2 / SE1000-SEN-WIND-S1

Direct Irradiance SE1000-SEN-IRR-S1

Ambient Temperature

Module Temperature

Wind Velocity

SE1000-SEN-WIND-S1

SE1000-SEN-TAMB-S2

SE1000-SEN-TMOD-S2

0-1.4V

0-10V

4-20mA

4-20mA

0-1400 W/m2

-40 to 90 ˚C / -40 to 194 ˚F

-40 to 90 ˚C / -40 to 194 ˚F

0-50 m/s

±5%

1% of full scale

1% of full scale

±0.5 m/s or ±3% of measuring value

Units

OUTPUT Electrical output range

MEASUREMENT Range Accuracy

INSTALLATION SPECIFICATIONS Control and Communication Gateway (sold separately; SE1000-CCG-G) Dimensions Weight

Enclosure type

Operating Temperature Protection Rating

Needed 154 x 86 x 40 / 6 x 3.5 x 1.5 340 / 0.75

64 x 58 x 34 / 2.5 x 2.3 x 1.3 350 / 0.77

64 x 58 x 34 / 2.5 x 2.3 x 1.3 350 / 0.77

Powder-coated aluminum

Pulver Coated Aluminium

Pulver Coated Aluminium

-20 to 70 / -4 to 155 IP65

-40 to 80 / -40 to 176 -40 to 80 / -40 to 176 IP67 IP67

165 x 105 x 105 / 6.5 x 4.2 x 4.2 750 / 1.65 Housing - Aluminum (AlMgSi1) Cup star - Synthetic, with fibre glass (PC-GF10) Bottom - Synthetic (POM H2320) 0 to 70 / 32 to 155 IP55

mm / in gm / lb

˚C / ˚F

The warranty and service for the sensors is provided directly by Ingenieurbüro Mencke & Tegtmeyer GmbH; for more details, please see http://www.imt-solar.com/products.html

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. 12/2015. V.01. Subject to change without notice.

POWER OPTIMIZER

SolarEdge Power Optimizer Module Embedded Solution OPJ300-LV

PV power optimization at the module-level

A certified junction box (US, IEC) incorporating the field proven SolarEdge power optimizer Up to 25% more energy and superior efficiency (99.5%) Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading Module-level voltage shutdown for installer and firefighter safety Simplifies system design by eliminating power optimizer selection process Independent optimization technology (IndOP™) - operation with any inverter and no additional hardware or addition of SolarEdge inverter for added benefits Unique Pass-Thru connector for easy module flashing and field replacement USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL

www.solaredge.us

SolarEdge Power Optimizer

Module Embedded Solution OPJ300-LV BENEFITS PER SOLUTION

SolarEdge Power Optimizer with SolarEdge Safety & Monitoring Interface and a Non-SolarEdge Inverter 3 3 3 3

SolarEdge Power Optimizer with SolarEdge Inverter

Added Energy Safety Monitoring Multi-facet Design Long String Design

3 3 3 3 3

SolarEdge Power Optimizer with a Non-SolarEdge Inverter 3

3

Power Optimizer connected to a Non-SolarEdge Inverter(1)

Power Optimizer connected to a SolarEdge Inverter

INPUT Rated Input DC Power Absolute Maximum Input Voltage (Voc) MPPT Operating Range Maximum Short Circuit Current (Isc) of connected PV Module Maximum DC Input Current Maximum Efficiency Weighted Efficiency Overvoltage Category

330 55 5 - 55

W Vdc Vdc

10

Adc

12.5 99.5 98.9 II

Adc % %

OUTPUT DURING OPERATION Maximum Output Current

15

10

Adc

Maximum Output Voltage

60

Voc of connected PV module

Vdc

OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM INVERTER OR INVERTER OFF) Safety Output Voltage per Power Optimizer

1

1(2)

Vdc

STANDARD COMPLIANCE EMC

FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3

Safety

IEC62109-1 (class II safety, TUV-SUD), UL1741 (TUV-Rheinland & CSA)

PV Junction Box Material RoHS

EN50548 (TUV-SUD), UL3730 (TUV-Rheinland & CSA) UL-94 (5-VA), UV Resistant Yes

INSTALLATION SPECIFICATIONS Compliant with 600V (UL) / 1000V (IEC)(3) 208x155x29.5 / 8.2x6.1x1.16 700 / 1.5 Double insulated; 6 mm2 ; MC4 Compatible 0.95 / 3.0 -40 - +85 / -40 - +185 IP67 / NEMA6 0 - 100

Maximum Allowed System Voltage Dimensions (WxLxH) Weight (excluding cables) Output Wire Type Output Wire Length Operating Temperature Range Protection Rating Relative Humidity

PV SYSTEM DESIGN

Power Optimizer connected to a SolarEdge Inverter EU North America

Minimum String Length

8 (1ph) 16 (3ph) 18 (3ph-MV)

8 (1ph) 10 (3ph-208V) 18 (3ph-480V)(3)

Maximum String Length

25 (1ph) 50 (3ph)

25 (1ph; 3ph-208V) 50 (3ph-480V)(3)

5250 (1ph) 11250 (3ph) 12750 (3ph-MV)

5250 (1ph) 6000 (3ph-208V) 12750 (3ph-480V)(3)

Maximum Power per String Parallel Strings of Different Lengths Parallel Strings of Different Orientations

Yes Yes

Vdc mm / in g / lb m / ft ˚C /˚F

%

Power Optimizer connected to a Non-SolarEdge Inverter(1)

According to inverter design rules & PV module datasheet

No Yes

Available only if Safety & Monitoring Interface (SMI) is installed or if SafeDCTM is disabled during installation by a one-time operation using the SolarEdge Key. When SolarEdge Safety and Monitoring Interface (SMI) is installed and off.

(3) 1000V(UL) model available.

Note - OPJ power optimizer warranty shall not exceed the maximum of (1) the module product warranty and (2) the module power warranty periods provided by the applicable module manufacturer.

(1) (2)

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2016. V.01. Subject to change without notice.

W W W

For North America P300-ZEP

Power Optimizer

SolarEdge Power Optimizer Zep CompatibleTM Module Add-On

Compatible with Zep Groove framed modules Certified Zep CompatibleTM bracket Attaches to module frame without screws - reduces on-roof labor and mounting costs Power optimizer equipment grounded through the bracket Up to 25% more energy Superior efficiency (99.5%)

Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading Flexible system design for maximum space utilization Next generation maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety

USA - Germany - Italy - France - Japan - China - Israel - Australia

www.solaredge.us

SolarEdge Power Optimizer - Zep CompatibleTM Module Add-On For North America P300-ZEP

P300-ZEP (for 60-cell PV modules) Input Rated Input DC power(1) Absolute Maximum Input Voltage (Voc at lowest temperature) MPPT Operating Range Maximum Short Circuit Current (Isc) Maximum DC Input Current Maximum Efficiency Weighted Efficiency Overvoltage Category

300 48 8 - 48 10 12.5 99.5 98.8 II

W Vdc Vdc Adc Adc % %

OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING INVERTER) Maximum Output Current Maximum Output Voltage

15 60

Adc Vdc

OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM INVERTER OR INVERTER OFF) Safety Output Voltage per Power Optimizer

1

Vdc

STANDARD Compliance EMC Safety RoHS

FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 IEC62109-1 (class II safety), UL1741 Yes

Installation Specifications Maximum Allowed System Voltage Dimensions including mounting bracket (W x L x H) Dimensions excluding mounting bracket (W x L x H) Weight (including cables and mounting bracket) Input Connector Output Connector Output Wire Length Operating Temperature Range Protection Rating Relative Humidity (1)

1000 141 x 256 x 40.5 / 5.55 x 10.08 x 1.59 141 x 212 x 40.5 / 5.55 x 8.34 x 1.59 1170 / 2.54 MC4 / Amphenol / Tyco Double Insulated; Amphenol 0.95 / 3.0 -40 - +85 / -40 - +185 IP65 / NEMA4 0 - 100

Vdc mm / in mm / in kg / lb

m / ft ˚C / ˚F

%

Rated STC power of the module. Module of up to +5% power tolerance allowed..

Single phase

three phase 208v

three phase 480v

Minimum String Length (Power Optimizers)

8

10

18

Maximum String Length (Power Optimizers)

25

25

50

5250

6000

12750

PV SySTEM DESIGN using a solaredge inverter

Maximum Power per String Parallel Strings of Different Lengths or Orientations

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 12/2013. V.01. Subject to change without notice.

Yes

W

COMMUNICATION

SolarEdge Wireless Communication ZigBee Kit North America SE1000 -ZBGW-K 5 -NA / SE1000 -ZB05 -SLV / SE1000 -ZBRPT 05 -NA

Simple Wireless Connectivity Connects SolarEdge inverters wirelessly to an Internet router ZigBee unit installed within the inverter enclosure for outdoor resilience Antenna external to inverter for wider range Communication to Internet via Ethernet The home gateway supports up to 15 SolarEdge devices (e.g. inverters) on the wireless network

Inverter

USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - ISRAEL - AUSTRALIA

Home Gateway Internet Router ETH

SolarEdge Portal www

www.solaredge.us

SolarEdge Wireless Communication ZigBee Kit North America SE1000-ZBGW-K5-NA / SE1000-ZB05-SLV / SE1000-ZBRPT05-NA FUNCTIONAL

UNIT

Number of devices that can be monitored

1-15

RF PERFORMANCE Transmit power Receiver Sensitivity Antenna gain Operating Frequency Range Outdoor (LOS) range Indoor range1

18 -102 4 2.4-2.5 400 / 1300 50 / 160

dBm dBm dBi GHz m / ft m / ft

HOME GATEWAY / REPEATER Antenna Power supply Operating temperature Relative humidity (non condensing) Ingress protection

Included Included, 100-240VAC -20 to +60 / -4 to +140 0 - 80 IP20 (Indoor)

˚C / ˚F %

ZIGBEE SLAVE KIT Antenna, mounting bracket and RF cable Dimensions (H x W x D) Ingress protection

CERTIFICATION

Included 22.0 x 32.9 x 4.1 / 0.9 x 1.3 x 0.2 IP65 (IP20 / indoor rated when installed inside Control and Communication Gateway or Firefighter Gateway)

Safety EMC Approvals 1

mm / in

IEC60950, UL60950 FCC(USA), IC(Canada)

Approximate values, may differ depending on specific installation conditions

Scenario A: Basic Kit Part Number: SE1000-ZBGW-K5-NA - 1 x SolarEdge home gateway - 1 x ZigBee slave kit for single SolarEdge device

Inverter

SolarEdge Portal

Home Gateway Master

Ethernet ETH

www

Internet Router Inverters

Scenario B: Adding additional slave units Part Number: SE1000-ZB05-SLV - 1x ZigBee slave kit for connecting multiple devices to the same home gateway

Master

Slave

Slave

Scenario C: Extending range using a repeater Part Number: SE1000-ZBRPT05-NA - 1 x SolarEdge ZigBee Repeater for extending the ZigBee range

SolarEdge Portal

Home Gateway Ethernet ETH

www

Internet Router

Slave

Inverter SolarEdge Portal

Home Gateway (Master)

ZigBee Repeater Slave

(Slave)

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2015. V.01. Subject to change without notice.

Internet Router Ethernet ETH

www