A Step by Step Guide to Polishing Terrazzo Flooring A combination of different kinds of stones and marble with cement or epoxy goes to make the terrazzo floors. These kinds of flooring need to be sealed after they are laid because they are made of porous substances. To make it gleam it needs proper polishing and cleaning. Yes, you need to use specific substances to clean and polish during terrazzo flooring restoration. This will ensure that there is minimum floor damage during the terrazzo floor refinishing work.
The terrazzo floor polish done systematically gives good results. Here is a six-step method to get back the floor gloss. 1. Remove dirt using a damp mop before polishing. You need to use a pH-neutral cleaner here. Mix this into a bucket of water. You can follow the manufacturer's guidance printed on the label of the cleaning material. Using the mop this mixture needs to be applied on the floor. 2. Then with a clean dampened mop remove the cleaner. The dirt will automatically be removed with this process. Then the floor should be allowed to dry overnight. 3. Now you need a marble or terrazzo sealer. Apply it on the floor using a floor roller or applicator brush. There may be a little excess sealer. Wipe it off and then leave it overnight. By morning it would have dried. 4. As a service provider in terrazzo restoration near Tampa, Gulfport, Sandkey and so on you may have a buffing machine. But a person resorting to the DIY method may need to buy or rent one. It may be available at home hardware shop or home improvement store here. Fit the buffer with hog hair polishing pads of light color. This can make sure the floor doesn’t stain. 5. On the terrazzo floor sprinkle the polishing powder. Run the buffer across the surface of the entire floor. The powder will form a slurry and it will use up almost all the powder. You can switch off the buffer now as the powder has been absorbed.