Supporting construction frame Variabel
User Information Doka supporting construction frames
Connection details and anchor positioning
Vertically extending the Supporting construction frame
The loads from the diagonal anchors are transferred via anchor walings (multipurpose walings). For each SC-frame, an anchor is placed 15 cm either side of the vertical axis of the SC-frame (i.e. 2 in all). Exception: If the load-bearing capacity is sufficient for 1 anchor per SC-frame, the anchors on each unit must be placed symmetrically.
The following components are used for vertically extending a SC-frame: ▪ Multi-purpose waling WS10 Top50 1.00m ▪ Formwork element connector FF20/50 Z + Connecting pin 10cm ▪ Spindle strut T7 for additional shoring ▪ Supplementary bracing
A M H
K
L
N E
H
G O K C
D
K
X a E F
B 9739-331-01
L
a ... 247 cm ... 45° ▲ ... Inside line of wall X H20 timber-beam formwork – form-ply 21 and 27mm Framed formwork in conjunction with 'Supportingconstruction distancer 20 cm'
9739-332-01
29.0 cm (where anchor is angled at 45°)
Close-up: Fitting the Tension plate
B
9739-346-01
16
999739002 - 01/2015