All You Need To Know About Fire Extinguisher Inspection!

All You Need To Know About Fire Extinguisher Inspection! penzu.com/public/7b13a5d6

What exactly is a Fire Extinguisher Inspection?

It is important to have a fire extinguisher inspection NJ done every month in order for your fire safety strategy to be effective. A monthly inspection will check the condition and include both maintenance tasks like cleaning or replacing parts as well as testing procedures that ensure each year's worth of extinguishers work properly when needed most!

To ensure the safety of everyone in your company, it is critical that a fire extinguisher inspection be conducted efficiently and with knowledge. The most common issues identified during these inspections must also be properly responded to so they can't happen again!

What is the recommended time period for examining fire extinguishers?

Fire extinguishers are a crucial component of any building's safety system. They need to be checked during installation and then again monthly as required by the National Fire Protection Association (NFPA).

When storing a fire extinguisher in an area that is prone to tampering, rusting, or other elements damaging it over time then more frequent inspections should take place.

1/3

NFPA is very clear about the importance of maintaining your fire extinguishers. These monthly inspections should be recorded for at least 12 months, with information like date and manufacturer performing it also noted on a label or electronic file.

Find out whether your fire extinguisher is working or not within 3 minutes There are five easy steps to performing monthly fire extinguisher inspections: Assess accessibility Assess the physical state of an extinguisher Examine the pressure gauge Examine the inspection tags Make a report and plan accordingly Fire extinguishers are an important part of any building's safety system. But how do you know if it’s safe? Follow this 3-minute guide to see what makes a good inspection!

Assess accessibility Initially, check out the physical condition of a fire extinguisher: It is important for fire extinguishers to be in an accessible location so they can quickly get out and put off any fires. If there are no visible signs of one near, then look around the area for potential spots where you might find them easily.

Assess the physical state of an extinguisher Make sure you inspect the fire extinguisher for any cracks in its hose or leaks at the nozzle before use. The serial number should be visible on top of it, and if possible look down into its holder to see how well-sealed they are so as not to cause problems when deployed later!

Examine the pressure gauge The safety pin must go through the holes in order to prevent accidental discharges, but it needs a good seal so you don't hear any creaks or noises when pushed down.

The gauge needle is an important indication of how much charge remains in your fire extinguisher. A green zone indicates that it's within a proper range, but if you see red there must be a problem and something needs to get fixed right away!

Examine the inspection tags If a fire extinguisher is available, make sure it has been inspected recently and the tag indicates that an inspection was conducted.

Make a report and plan accordingly

2/3

Finally, after checking the fire extinguisher for safety and ensuring that it is in good working condition with a summarizing observation/action plan to sign off on - you’re done!

With this handy guide, everyone in your office will be able to remember what they need for a fire extinguisher inspection.

3/3