Chilled Iron Grit Manufacturer Chilled iron grit supplier is provided by the melting of cast iron with the following atomization and crushing of the grains. Due to the intense hardness, the grain breaks into sharp-edged particles during the sand blasting machine process. This gives the operating mix of its permanently high cleaning and roughening features.
Product Details: Hardness
750 to 860 HRC (Hardness Rockwell C)
Micro Structure
Martensite completely fine & uniform
Martensite completely fine & uniform 7.5 gm./ml Material
Iron
Chilled Iron Grit Manufacturer When a localized area of gray iron is cooled very rapidly from the melt, iron is made at the place that has been cooled. This sort of white iron is named chilled iron grit supplier. A relaxing iron casting is often produced by adjusting the carbon composition of the white iron in order that the traditional cooling rate at the surface is simply enough fast to supply white iron while the slower cooling rate below the surface will produce gray iron. The depth of chill decreases and therefore the hardness of the chilled iron grit supplier zone increases with increasing carbon content. Chilled iron grit supplier isn't burn-sensitive and features a high specific grinding energy due to its high carbide content. Its hardness is approximately 50 HRc and therefore the maximum surface roughness achieved on the machine is 0.5 μm, therefore a typical structure bonding system is employed that's usually between 23 and 27% volume of the wheel. The grain content is typically 50 vol.%, and wheel speeds are usually up to 120 m/s. To summarize, a cleaning station contains a rough screen to get rid of the trash, a storage sand blasting machine, a metering device to supply a controlled flow of abrasive, and an airwash classifier that removes dust and fines.
Size Available G80
2.0-2.8 mm
G66
1.7-2.4 mm
G55
1.4-2.0 mm