ABES Public Design | Catalogue 2016 | English by ABES Public Design

Street Furniture

2016 | 2017

INTRODUCTION

INNOVATIVE TECHNOLOGY COMBINED WITH UNIQUE DESIGN Founded in 1994, ABES focused on the design of urban furniture and elements for public space since 1999. ABES' extraordinary, patented 3p-Technology system was developed with the customer‘s needs in mind. This advanced technology allows easy, time-saving and low-cost repair of public furniture. The main idea is to connect bollards with a junction piece having a predetermined breaking point. If damaged, object and foundation stay intact, and only the junction piece has to be replaced on site. ABES offers unique products with an individual character. They attract attention, inspire people, and encourage viewers to engage in a variety of opinions and discussions, which creates their uniqueness. This has been confirmed by the “Design Centre North Rhine-Westphalia” by giving the red dot award to the Signum I bike stand and the Metropol bollard, which are built using 3p-Technology. We use a variety of first-class materials for ABES products. Apart from galvanised or stainless steel and selected woods, ABES is increasingly using cast iron or cast aluminium. These materials, which have been somewhat forgotten, have special characteristics so that regular welding techniques cannot be used for them. Last but not least, cast technology is extraordinarily environmentally friendly because 95 % of the materials originate from recycled resources, and the products themselves can be almost completely recycled. When choosing these raw materials, you are helping our environment by saving scarce resources and avoiding waste production. Discover the aesthetically and technically innovative ABES products for yourself.

Project: Saarbrücken, Germany

STANDARD RAL AND DB COLOURS (No surcharge. RAL colours with matte microstructure.)

RAL 3020 Traffic red RAL 6005 Moss green RAL 6009 Fir green RAL 7016 Anthracite grey RAL 7035 Light grey RAL 9005 Jet black RAL 9006 White aluminium RAL 9016 Traffic white DB 703 Glimmer grey Colour presentation is not binding. Further RAL and DB colours possible with a surcharge (no surcharge with supply of at least 10 pieces)

Overview of RAL CLASSIC colours: abes-online.com/en/ral-colors/

CONTENT

PAGE 10-19

e .c

24/7

A BE S

ABES 3P-TECHNOLOGY NL I NE- S

a b e s - o nlin

BOLLARDS 80-86 | Ligh tin g bollards 87-89 | Feeder bollards PAGE 20-89

BENCHES & TABLES ONLINE-SHOP PAGE 90-111

PA G E 8 -9

WASTE CONTAINERS PAGE 112-123

BICYCLE STANDS PAGE 124-135

DELIVERABLE MOUNTING VARIANTS:

138 | Tree-Gu ard 139- 1 41 | Plan ters 142 | Fire Bas ket PAGE 136-143

3p-Technology 3p-High Fixed mounting

145 | Produ ct overview 146- 1 49 | Referen ces /Projects PAGE 145-149

Screw-on Fold down Removable

(not 3p-Technology)

HWS-mobil FLOOD PREVENTION PAGE 150-151

OVERVIEW

Bollard 043

Bollard 027-1 | 027-2

Bollard 012

43 32

Bollard 002

Bollard 009-1 | 009-2

Bollard 064

Bollard 015 | 017

Bollard 005-2

Bollard 005-1

Bollard 025

Bollard 040

Bollard 016

Bollard 038

Bollard 026

Bollard 021-1 | 021-2

Bollard 003

Bollard 034

Bollard 060

Bollard 032

2016 14

Bollard 024

Bollard 041

Bollard 013

Bollard 061

Bollard 031-1 | 031-2

Bollard 068

Bollard 062

Bollard 011

Bollard 018

Bollard 004

Bollard 019

Bollard 039

Bollard 001

Bollard 028

Bollard 029

Bollard 014-1 | -2 | -3 24

Bollard 001-1

Bollard 008

Bollard 010

Ground shells covers

Ground shells

Junction pieces

Clamping bolt sets

OVERVIEW 3P-TE CHNOLOGY P A GE 1 0 - 1 9

BOLLARDS

All bollards (except for Feeder-Bollard 300-1 and 300-2) can be supplied with 3p-Technology P A GE 2 0 - 8 9

106

108 84-85

93 84-85

100

109 86

Stool + Table 145

BENCHES & TABLES

110

Feeder-Bollard 300-2

2016

Feeder-Bollard 300-1

Bollard-Ashtray 525

Lighting-Bollard 240 LED

Lighting-Bollard 200 (LED)

Seating-Bollard 105

99 70

Bench + Table 144

82 69

Bench 121-2

92 68

Lean-On-Bench 108

Lighting-Bollard 230 LED

2016

Bench 121-1

Lighting-Bollard 220 LED

Lighting-Bollard 210 LED

Bollard 065

Bollard 066

Bench + Table 143

Bench 142

Bench 141

Bench 100

Bench 131

Bench 103 78

Bench 107-1 | 107-2

Bench 104 64 75 76

102

88 89

Other bollard designs can be developed upon request.

P A G E 9 0 -1 1 1

96 98

103

111

Bollard 056

Bollard 042-1 | 042-2

Bollard 055-2 | 037-2

Bollard 063

Bollard 058

Bollard 057

Bollard 055-1 | 037-1

Bollard 007

Bollard 023

Bollard 022

Bollard 020

Bollard 006-2

Bollard 006-1

OVERVIEW

2016

126

138 127

133

139

118

128

PLANTERS | TREE GUARDS Bicycle-Stand 450-1

Bicycle-Stand 451

Bicycle-Stand 454

Bicycle-Stand 453

Bicycle-Stand 452

117

Fire Basket 935

Bicycle-Stand 450-5

Bicycle-Stand 450-2 115

Planter 710

Planter 720 | 721

Tree-Guard 662

119

P A G E 1 3 6 -1 4 1

140

120

129

142

Waste-Container 515

Bollard-Ashtray 525

Waste-Container 532 | 533

Waste-Container 524

Waste-Container 523

Waste-Container 530 | 529

Waste-Container 531 | 527

2016

WASTE CONTAINERS P A GE 1 1 2 - 1 2 3

122

BICYCLE STANDS

FIRE BASKET

123

P A GE 1 2 4 - 1 3 5

131

135

P A GE 1 4 2 - 1 4 3

OVERVIEW

NEW RELEASES 2016

Lighting-Bollard 200 (LED) Stainless steel | 620 mm

Bollard 068

Bollard 066

Cast aluminium | 950 mm

Steel | 900 mm

Lighting-Bollard 200 LED

Lighting-Bollard 200

Stainless steel | 620 mm

Fire Basket 935

Sheet steel | 50 litres 142

123

Lighting-Bollard 240 LED

Waste-Container 515

Cast aluminium | 870 mm

Steel | 30 litres

3p-Technology Various accessories 12

ONLINE SHOP

THE ABES ONLINE SHOP! Order in your own time now at: www.abes-online.com Who said you can’t have an online shop for street furniture? Existing and potential customers now have the opportunity to search for suitable material for their projects

IN ON L E - S

e .c

24/7

A BE S

at a time that suits them.

a b e s - o nlin

ABES Online-Shop: http://abes-online.com/en/ public-furniture-shop/

WE’RE CONSTANTLY EXPANDING OUR PRODUCT RANGE, SO IT’S ALWAYS WORTH CHECKING BACK.

ONLINE SHOP THE ABES ONLINE SHOP OFFERS ALL KINDS OF ADVANTAGES: 

A CLASSIC SHOPPING CART TO HOLD ALL YOUR ITEMS



PRICE REQUESTS



WISH LIST



FEEDBACK OPTIONS

 

PURCHASES ON ACCOUNT INTERACTIVE 3P-TECHNOLOGY COST COMPARISON

1 | PURCHASES ON ACCOUNT Many online shops only sell their products with prepayment. Because we know our all-round excellence in quality, we deliver first and then send the bill. The only time we don’t follow this approach is if a company has been rejected following checks by our credit insurance company. This means municipal councils don’t have to pay in advance.

2 | VARIETY IN THE ONLINE SHOP ABES will continue to focus on its own core products, which primarily include all traffic bollards with the cost-reducing 3p-technology fastening system and pre-determined breaking point, which has now become a standard in many cities in Germany and abroad. But they also include a lean-on bench, planters, LED lighting bollards with pre-determined breaking point, and much more. This core competence is demonstrated through ABES product presentations in the company’s own catalogues. On the other hand, there are other manufacturers who also produce robust, attractive, high-quality furniture. The comprehensive ABES online shop now additionally features an entire range of selected, premium products, enabling customers to purchase many different items from one single shop.

ADVANTAGES AT A GLANCE

1 | FOR BOLLARDS: SYSTEMATIC REPAIRS

COSTS (FOR BOLLARDS)

The patented 3p-Technology revolves around the junction piece with a predetermined breaking point. If a bollard with 3p-Technology suffers an impact, the junction piece gives way without damaging the bollard or the foundation, which would be the case for fixed mountings. All parts including the foundation and paving remain undamaged, except for minor scratches on the bollard.

·· Only EUR 28.80 for a replaceable junction piece with breaking point

The bollard can be immediately resurrected by simply fitting a new junction piece on site. The 3p-Technology helps to lower the costs of maintenance, and also allows vast freedom of design since the bollards can be removed depending on the system.

·· Less than 3 minutes working time ·· Bollards, foundations with floor sleeves and plaster usually remain intact ·· Costs reduced by up to 90 %

ASSEMBLY

·· System is extremely sturdy ·· Fast replacement with simple tools

2 | FOR BENCHES & WASTE CONTAINERS: FLEXIBILITY AND EASY ASSEMBLY

·· Standard triangular bolts and keys can be used

The 3p-Technology originally developed for bollards has been adapted to some bench systems and waste containers, thereby making assembly and maintenance significantly easier.

PLANNING AND MAINTENANCE

With 3p-Technology, any of the products can be quickly and easily assembled and dismantled.

·· All products can be removed as per the system ·· Fast removal of public furniture temporarily creates additional space for gatherings, markets or car parks

All products that can be equipped with 3p-Technology are shown with this logo in the catalogue

Interactif 3p-Technology cost comparison at: http://abesonline.com/en/3p-technology/3p-cost-comparison/

·· The ground shells can be covered; this reduces tripping hazard and keeps the ground shell clean ·· Maintenance work does not have to be performed on site ·· Products with 3p-Technology are interchangeable and can be replaced one with the other.

3p-Technology developer: Prof. Michael Schuth, Trier University of Applied Sciences, Mechanical Engineering. European patent number: 0110 5289.1-2303

3P-TECHNOLOGY

WHAT IS THE ABES 3P-TECHNOLOGY?

3P-TECHNOLOGY

THE FUNCTIONAL PRINCIPLEâ&#x20AC;&#x2030;* DAMAGING THE BOLLARD

2 1

View after the bollard has been knocked by a car or truck

The replacement junction piece snaps at the predetermined breaking point (here: junction piece without anti-roll device)

REPLACEMENT OF THE JUNCTION PIECE 1

Detach clamping bolts

Remove the broken junction piece from the bollard and ground shell

Use a new junction piece in the ground shell

Place bollard on junction piece

Screw in clamping bolts

DONE 1

Replaceable junction piece

Breaking point

ASSEMBLE BOLLARD

Bollard back standing firmly once more

Video on the 3p-Technology at: http://abes-online.com/ en/3p-technology/

*â&#x20AC;&#x2030;The operating principle described applies primarily to bollards, although the assembly and disassembly of benches and waist containers with 3p-Technology are identical.

3P-TECHNOLOGY

2016

WHAT’S NEW

SPECIAL ACCESSORIES FOR THE 3P-TECHNOLOGY In addition to the standard delivery

TRIANGULAR-HEAD BOLT AND TOOLS

000.027 | 000.024 | 000.019 | 000.011

A triangular-head nut or triangular key can be used to remove a bollard containing a triangular-head bolt. The components for this are available as special accessories:

Triangular key (robust) 000.024

000.027

·· Triangular-head bolt as per DIN 22417 ·· Triangular nut for ratchet or rattle wrench (opener)

Triangular key (standard) 000.011

·· Triangular key (standard) ·· Triangular key (robust)

000.019

See price list or online shop

OVAL BOLT AND TOOLS

000.028 | 000.025 | 000.033

Systems with triangular locking devices are very common. An oval bolt restricts the number of people able to remove a bollard. The following components are available as special accessories to provide an alternative to the triangular-head bolt:

000.028

·· Oval bolt ·· Nut for ratchet or rattle wrench (opener) ·· Socket wrench

000.033 000.025

See price list or online shop

3-PIN ADAPTER to tighten the clamping cone After years of use, the counter-clamping cone may rotate simultaneously. In this case, it is advisable to use the special 3-pin tool to tighten this clamping cone*.

000.029 | 000.026

000.029

The 3-pin adapter is a special accessory, and is available as: ·· Nut for ratchet or rattle wrench (opener) ·· Socket wrench * As of 2016, all clamping bolt sets come with the N2 three-slotted clamping cone.

See price list or online shop

000.026 Clamping cone N2 (Standard, see page 13)

1 | CLAMPING BOLTS

3P-TECHNOLOGY

COMPONENTS OF THE 3P-TECHNOLOGY

CLAMPING BOLT SET WITH HEX HEAD BOLT (STANDARD)

000.004

For a snug-fitting bollard consisting of: M12 hexagonal-head bolt, N1 clamping cone and N2 clamping cone with internal thread.

Cross-section

·· Material: stainless steel 1.4301

ø 41

Before installation, it's recommend greasing hex head bolt and nut with a special ceramic paste. Please enquire! We will be happy to advise you.

ø 41

·· Tightens the system firmly

CLAMPING BOLT SET WITH TRIANGULAR HEAD BOLT

000.010

Consisting of M12 bolt with a triangular head, N1 clamping cone and N2 clamping cone with internal thread.

Cross-section

ø 41

·· One-side opening and closing with male triangular key according to DIN 22417 ·· Material: stainless steel 1.4301

·· Additional costs according to the price list or online shop

CLAMPING BOLT SET WITH LENGTHENED CLAMPING CONE

000.021

Consisting of M12 bolt with a triangular head, N1 clamping cone and N2 clamping cone with internal thread.

N5 Cross-section ø 44

N2 Cross-section ø 41

·· Additional protection by a padlock in order to prevent unauthorised removal ·· Possible use with triangular head bolt or with hex head bolt

·· Material: stainless steel 1.4301 ·· Additional costs according to the price list or online shop

J U N C T IO N P IECES

3P-TECHNOLOGY

COMPONENTS OF THE 3P-TECHNOLOGY 2 | JUNCTION PIECES WITH PRE-DETERMINED BREAKING POINT

JUNCTION PIECE (standard) | WITH ANTI-ROLL DEVICE | EXTENDED (3P-HIGH)

000.008 | 000.013 | 000.016

·· Links bollard to the ground shell 165

·· Constructive element with a pre-determined breaking point

Cross-section standard

Standard

·· Optional 3p-High with extended connection (details see page 15)

With anti-roll device

·· Material: cast iron, galvanised

448

·· Optional with anti-roll device to prevent rolling away

355

·· Can be instantly replaced if damaged

Top view

Extended (3p-High)

JUNCTION PIECE WITH STEEL SPRING (3P-FLEX)

Cross-section with anti-roll device

000.015

·· Bollard returns to original position after impact

·· Same features as the junction piece without anti-roll device

240

·· 8 -10° flexure (the predetermined breaking point yields if the spring is overexpanded)

·· Material: cast iron, galvanised ·· Additional costs according to the price list ·· Details see page 15

Cross-section

Cross-section extended (3p-High)

3p-Normal

3p-High

3P-TECHNOLOGY

ALTERNATIVE DESIGNS OF THE JUNCTION PIECE WITH PRE-DETERMINED BREAKING POINT 3P-HIGH For many bollard models, the 3p-Technology aperture can be moved further upwards. This way it is possible to open and close the locking mechanism with long fire brigade triangular keys without offsets. This version requires an extended junction piece. At small diameters the clamping bolts may protrude slightly. In case of doubts, please contact us.

3P-FLEX Vehicle The bollard yields

3p-FLEX Realigns the bollard

When pressure is applied on the bollards, the steel springs on the junction piece yields up to 8 - 10°, preventing damage to the bollard, the foundation and the pavement. If the pressure is reduced, the bollard returns to its original position. ·· Bollard returns to its original position after impact (8 –10° flexure). When the breaking load is exceeded, the predetermined breaking point yields. ·· Junction piece needs to be replaced even less frequently

Steel spring yields in the junction piece

·· Additional costs for the junction piece amortize in short-term ·· Vehicle damage is reduced by the bollard’s flexible yielding

GR O UND S HEL L S

3P-TECHNOLOGY

COMPONENTS OF THE 3P-TECHNOLOGY 3 | GROUND SHELLS

GROUND SHELLS 300 mm, 500 mm, 100 mm

000.001 | 000.003 | 000.005

·· Extremely robust component (5 / 7.2 / 8.6 kg) for long-lasting concrete embedment

Cross-section

(300 mm)

·· 300 mm ground shell: basic equipment

(500 mm)

125

·· 500 mm ground shell: optional for additional stability (e.g. with soft, unstabilised subsoil)

300

·· 100 mm ground shell: optional as special solution in case of small mounting depth (e.g. car parks) ·· Material: cast iron, galvanised

500

·· Each delivery is accompanied by detailed installation instructions and can also be downloaded as PDF on our web site.

125

Top view

(300/500 mm)

120

Cross-section 100

(100 mm)

300 mm (standard)

500 mm

100 mm

200

Top view (100 mm)

In order to prevent the interruption of the construction process, the ground shells can be delivered in advance, if requested.

d = 15-17 mm

3P-TECHNOLOGY

4 | GROUND SHELL COVERS

GROUND SHELL COVER (STANDARD)

000.002

·· Reduces hazard tripping

125

·· Prevents soiling ·· Material: cast aluminium Top view

ø 25

Cross-section

125

GROUND SHELL COVER WITH SPRING

000.050 120

·· Ground shell cover with spring ·· Can only be removed with a flat object (screwdriver) ·· Material: ST37 steel, hot-dip galvanised

Cross-section

Top view

3P-TECHNOLOGY

BOLLARD 008

3P-TECHNOLOGY

BUNDESANSTALT FÜR STRASSENWESEN (FEDERAL HIGHWAY RESEARCH INSTITUTE)

Report n° V4 – 61/2002 dated Sep 13, 2002 on the

CHARACTERISTICS OF A BOLLARD SYSTEM REGARDING THE EFFORT REQUIRED FOR REPAIR APPLICATION APPLICANT:

ABES Büro Deutschland Zur Ehreneiche 3 57250 Netphen

APPLICATION DATE: 27 August 2002 SUBJECT OF APPLICATION: Confirmation of the effort required to repair a damaged bollard

1 | Bollard before damage

The junction piece yields, the bollard falls over and is held to the ground shell by an anchor. The bollard itself, the ground shell and the foundations do not show any visible signs of damage (see figure 3).

MATERIAL DESCRIPTION*: Metropol bollard with 3p-Technology including: ·· Ground shell n° 000.001, globular cast iron GGG, embedded at ground level ·· Junction piece, globular cast iron GGG, with hexagon bolt and nut M12, stainless steel 1.4301, n° 000.008 ·· Clamping cone, stainless steel 1.4301, Nr. 000.004 ·· Anchor, galvanised steel ST 37, n° 000.013 ·· Bollard, cast iron GG 20, n° 001.003

2 | Damaged bollard

3 | Bollard system after damage

The bollard is mounted with a new junction piece within 3 minutes (see figure 4 and figure 5). After repair the bollard is firmly fixed in place.

SERIAL NUMBER: None CONDITION: New *provided by applicant

4 | Junction piece: damaged (right) and replacement (left)

5 | Repairing the bollard

TEST A properly installed Metropol bollard with 3p-Technology is damaged by a car (see figure 1 and figure 2).

(Dipl.-Phys.. U. Ellmers) Oberregierungsrat

(Dipl.-Phys. D. Heuzeroth) Regierungsrat

BARRIER POSTS or BOLLARDS are natural parts of our cityscapes. Elegant boundaries or driveway and walkway markings are just a few of their many applicabilities. The various ABES designs, ranging from classic to modern, allow the harmonic integration of bollards in any environment. These objects are permanently exposed to the risk of being knocked over by cars pulling in and out of parking bays. To counteract this risk, ABES has developed the 3p-Technology for bollard fastening as an alternative to fixed mounting. This is an easy and low-cost way to replace damaged bollards.

BOLLARD 032 28

51 BOLLARD 008

BOLLARD 042-1 7 6

8 5 LIGHTING-BOLLARD 200

BOLLARDS 40 BOLLARD 031

3p-High (see page 16)

Bollard 031-1

Fixed mounting

Bollard 010

Bollard-Ashtray 525

3p-Technology (Standard)

Bollard 031-1

3p-Technology is by far the most frequently ordered type of mounting. It is used in more than 85 % of cases, because it significantly reduces costs.

Bollard 031-1

MOUNTING VARIANTS

Screw-on

Fold down *

Screw-on

Fold down *

Door stopper

* The embeddable fold down version is currently available for the following bollards: Bollard 016, Bollard 027-1/027-2, Bollard 010

SPECIAL MODELS

SPECIAL MODELS Optional deliveries

Finished with logo (Available for all products made of cast aluminum)

Bollard 014-2

With eyelets & chain

Stainless steel: 240 grain - pickled

Bollard 001

Bollard 010

Bollard 042-1

With a powder coated ring

Powder coated Red/white

Bollard 042-1

Bollard 010

Bollard 027-2

With three rings of reflective tape

Bollard 056

With one ring of reflective tape

Catâ&#x20AC;&#x2122;s eye reflectors

1 ring with reflecting paint

Bollard 010

3 grooves with reflecting paint

Bollard 010

Paintwork, reflective tapes, finishings, eyelets, chains etc. are available on request.

Stainless steel: electropolished (high-gloss)

ABES Online-Shop 24/7: www.abes-online.com

BOLLARDS

Bollard 018 CAST ALUMINIUM

| 850 mm

Specifications Bollard made from cast aluminium with a cylindrical base on a pedestal, several indentations and rings and a sphere on top.

Mounting Removable with 3p-Technology, comprising a 300 mm ground shell, junction piece with pre-determined breaking point (without anti-roll device), 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard. Alternative: concrete embedment

Colour: DB 703

Finish ·· Powder coating in standard RAL colours or DB 703 ·· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge. ·· For details, see catalogue p. 2-23, price list or online-shop

Cast aluminium

Fixed mounting

3p-Technology

018.001

018.020

850 300/500

130

300

Height above ground level: 850 mm Diameter: 90 mm / 130 mm Height ground shell: 300 mm or 500 mm Weight: approx. 12.9 kg (for fixed mounting + 1.5 kg)

850

Measurements

BOLLARDS

Bollard 011 CAST ALUMINIUM

| 860 mm

Specifications Oval bollard made from cast aluminum with a spiral-shaped head and a protruding vertical joint.

Colour: RAL 9006 White aluminium, Design: “hammer.runge design”

Cast aluminium

102

Fixed mounting

3p-Technology

011.001

011.020

860

Registered design M 9801747.0

Measurements Height above ground level: 860 mm Diameter: 102 mm x 96 mm / 108 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11.5 kg (for fixed mounting + 1.5 kg)

300/500

300

108

BOLLARDS

Bollard 062 CAST ALUMINIUM

| 910 mm

Specifications Cylindrical bollard made from cast aluminium with a two-part base and a protruding ring below the enlarged spherical head.

Colour: DB 703

Cast aluminium

Fixed mounting

3p-Technology

062.001

062.020

104

910

Height above ground level: 910 mm Diameter: 104 mm / 115 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

910

Measurements

300/500

300

115

CAST ALUMINIUM

BOLLARDS

Bollard 068

2016

| 950 mm

Specifications Cylindrical bollard made from cast aluminium surrounded by two, multi-layered rings and a tapering cone on top.

Colour: DB 703

Cast aluminium

Fixed mounting

3p-Technology

068.001

068.020

950

Measurements Height above ground level: 950 mm Diameter: 82 mm / 97 mm Height ground shell: 300 mm or 500 mm Weight: approx. 8,2 kg (for fixed mounting + 1.5 kg)

300/500

300

BOLLARDS

Bollard 032 CAST ALUMINIUM

| 860 mm

Specifications Rectangular cast aluminium bollard fitted flush with the top, with inward vertical walls.

Colour: DB 703

Finish

Note

·· Powder coating in standard RAL colours or DB 703

The ground rosette is part of the delivery (3p-Technology).

·· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge. ·· For details, see catalogue p. 2-23, price list or online-shop

Cast aluminium

Fixed mounting

3p-Technology

032.001

032.020

Rosette 135 x 135 mm

Top view Completely covers the ground shell Material: ST37 steel, hot-dip galvanised and powder coated in bollard paint

100

860

860 300/500

Height above ground level: 860 mm Diameter: 96 mm x 100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 8 kg (for fixed mounting + 1.5 kg)

300

Measurements

BOLLARDS

Bollard 060 CAST ALUMINIUM

| 750 mm

Specifications Cylindrical bollard made from cast aluminium with a flat top and a narrowed upper part with four intermitting, protruding rings.

Colour: DB 703, Design: Nico Thurm

Cast aluminium

102

750

102

3p-Technology

060.001

060.020

Measurements Height above ground level: 750 mm Diameter: 102 mm/140 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11 kg (for fixed mounting + 1.5 kg)

300/500

300

140

Fixed mounting

BOLLARDS

Bollard 034 CAST ALUMINIUM

| 780 mm

Specifications Cylindrical bollard made from cast aluminium with a cast, narrow groove that separates the slightly tapering top from the bollard and an accentuated cylindrical base.

Colour: DB 702

Finish

Special models

·· Powder coating in standard RAL colours or DB 703

Embellished with logo

·· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge ·· For details, see catalogue p. 2-23, price list or online-shop

Cast aluminium

Fixed mounting

3p-Technology

034.001

034.020

780 300/500

100

300

Height above ground level: 780 mm Diameter: 90 mm / 100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

780

Measurements

BOLLARDS

Bollard 025 CAST ALUMINIUM

| 850 mm

Specifications Cylindrical bollard made from cast aluminium with two paired rings and a ring below a flattened hemisphere at the top.

Colour: DB 703

Cast aluminium

Fixed mounting

3p-Technology

025.001

025.020

850

Measurements Height above ground level: 850 mm Diameter: 85 mm / 140 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10.7 kg (for fixed mounting + 1.5 kg)

300/500

300

140

ABES Online-Shop 24/7: www.abes-online.com

BOLLARDS

Bollard 005-1 CAST ALUMINIUM

| 890 mm

Specifications Cylindrical bollard made from cast aluminium with three multilayered rings, as well as a spherical top piece.

Colour: RAL 7016 Anthracite grey

Cast aluminium

Fixed mounting

3p-Technology

005.001

005.020

890

300/500

170

300

Height above ground level: 890 mm Diameter: 70 mm / 170 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10.5 kg (for fixed mounting + 1.5 kg)

890

Measurements

BOLLARDS

Bollard 005-2 CAST ALUMINIUM

| 900 mm

Specifications Cylindrical bollard made from cast aluminium with two multilayered rings, a cylindrical base about 100 mm high and a sphere as top piece.

Colour: DB 703

Cast aluminium

Fixed mounting

3p-Technology

005.201

005.220

900

Measurements

300/500

300

140

Height above ground level: 900 mm Diameter: 80 mm / 140 mm Height ground shell: 300 mm or 500 mm Weight: approx. 13 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 017 | 015 017 | CAST ALUMINIUM | 750 mm 015 | CAST ALUMINIUM | 950 mm

Specifications Cylindrical bollard made from cast aluminum with an ornamental ring on top and at the base. Optionally available with a domed top.

Colour: RAL 7016 Anthracite grey

Fixed mounting 3p-Technology 017 | 750 | cast aluminium

017.001

017.020

017 | 750 | cast alum., arched head

017.101

017.120

015 | 950 | cast aluminium

015.001

015.020

015 | 950 | cast alum., arched head

015.101

015.120

105

750 | 950

300

300/500

Measurements Height above ground level: 750 mm | 950 mm Diameter: 105 mm Height ground shell: 300 mm or 500 mm Weight 750 mm: approx. 12 kg (for fixed mounting + 1.5 kg) Weight 950 mm: approx. 14 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 064 CAST ALUMINIUM

| 1200 mm

Specifications Square bollard made from cast aluminium with a flat top.

Colour: DB 703

Cast aluminium

100

Fixed mounting

3p-Technology

064.001

064.020

100

1200

300

300/500

Measurements Height above ground level: 1200 mm Diameter: 100 mm x 100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 25 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Ground rosette option ·· Completely covers the ground shell, unauthorised removal is prevented by small hooks ·· Material: Steel ST37, hot-dip galvanised and powder coated in bollard colour ·· For surcharge, see online-shop “Components”

Colour: DB 702

Fixed mounting

3p-Technology

014-1 | 850 | cast aluminium

014.001

014.020

014-2 | 1000 | cast aluminium

014.001.100

014.020.100

014-3 | 1300 | cast aluminium

014.001.130

014.020.130

Ground rosette

Optional rosette Vertical cut Horizontal cut

000.030

850 | 1000 | 1300 300/500

300

Height above ground level: 850 mm |1000 mm |1300 mm Diameter: 85 mm / 98 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg | 11.5 kg | 14 kg (for fixed mounting + 1.5 kg)

850 | 1000 | 1300

Measurements

BOLLARDS

Bollard 029 CAST ALUMINIUM

| 900 mm

Specifications Cylindrical smooth bollard made from cast aluminium with a spherical top.

Colour: RAL 9006 White aluminium

Cast aluminium

Fixed mounting

3p-Technology

029.001

029.020

900

Measurements

300/500

300

100

Height above ground level: 900 mm Diameter: 80 mm / 100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10.4 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 028 CAST ALUMINIUM

| 900 mm

Specifications Cylindrical bollard made from cast aluminium with a two-part base and a hemispere on top separated by a ring.

Colour: DB 703

Cast aluminium

Fixed mounting

3p-Technology

028.001

028.020

900

900 300/500

Height above ground level: 900 mm Diameter: 90 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

300

Measurements

BOLLARDS

Bollard 039 CAST ALUMINIUM

| 870 mm

Specifications Cylindrical bollard made from cast aluminium, with a revolving three split ring below the hemispherical top, as well as above the base.

Colour: DB 703

Cast aluminium

3p-Technology

039.001

039.020

Measurements

170

Height above ground level: 870 mm Diameter: 61 mm / 80 mm / 170 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11 kg (for fixed mounting + 1.5 kg)

300/500

870

870 300

Fixed mounting

ABES Online-Shop 24/7: www.abes-online.com

BOLLARDS

Bollard 031 031-1 | CAST ALUMINIUM | 870 mm 031-2 | CAST ALUMINIUM | 1200 mm

Specifications Cylindrical bollard made from cast aluminium, with a flat top.

ALSO AVAILABLE AS A LIGHTING BOLLARD! (See p. 81) Colour: DB 703

Fixed mounting 3p-Technology

3p-High

031-1 | 870 | cast alumin.

031.001

031.020

031.030

031-2 | 1200 | cast alumin.

031.001.120

031.020.120

870 | 1200

870 | 1200 300/500

Height above ground level: 870 mm | 1200 mm Diameter: 98 mm Height ground shell: 300 mm or 500 mm Weight: approx. 15.8 kg | 21 kg (for fixed mounting + 1.5 kg)

300

Measurements

BOLLARDS

Bollard 061 CAST ALUMINIUM

| 870 mm

Specifications Cylindrical cast aluminium bollard with a flat top and a cast-in circumferential groove.

Colour: DB 703

Fixed mounting 3p-Technology Cast aluminium

061.001

061.020

3p-High 061.030

870

300

300/500

Measurements Height above ground level: 870 mm Diameter: 98 mm Height ground shell: 300 mm or 500 mm Weight: approx. 15.5 kg (for permanent installation + 1.5 kg)

BOLLARDS

Bollard 041 CAST ALUMINIUM

| 925 mm

Specifications Subdivided cast aluminium bollard on a hexagonal base, tapering towards the top and ending in an acorn-shaped figure. The six sides show rectangular, cast-in recesses.

Colour: DB 702

Cast aluminium

Fixed mounting

3p-Technology

041.001

041.020

185

925

925 300/500

Height above ground level: 925 mm Diameter: 185 mm Height ground shell: 300 mm or 500 mm Weight: approx. 15 kg (for fixed mounting + 1.5 kg)

300

Measurements

BOLLARDS

Bollard 003 CAST ALUMINIUM

| 738 mm

Specifications Cylindrical bollard made from cast aluminium with twelve window-like cast indentations, a protruding top and a distinct cylindrical base.

Colour: DB 703, Design: “hammer.runge design”

Cast aluminium

144

Fixed mounting

3p-Technology

003.001

003.020

144

738

Height above ground level: 738 mm Diameter: 144 mm/120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

300/500

300

120

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 026 RUBBER

| 600 mm

Specifications Dual waisted bollard made of rubber granulate with a distinct top, middle and base section.

Colour: reddish-brown

FEATURES ·· Suitable for playground areas ·· Low risk of injury due to rubber granulate ·· High stablility due to internal steel tube ·· Can be used as seat

Finish ·· Material: rubber granulate ·· Available colours (not RAL): reddish-brown (see photo), grey, green, anthracite, other colours on request ·· For details, see catalogue p. 10-19, price list or online-shop

Rubber

Fixed mounting

3p-Technology

026.001

026.020

Measurements

600 300/500

200

600

200

300

Height above ground level: 600 mm (900 also available, at a surcharge) Diameter: 200 mm Height ground shell: 300 mm or 500 mm Weight: approx. 13 kg (for fixed mounting + 1.5 kg)

Saarbr端cken PROJECT Bollard 027-1 with lengthened clamping cone for padlock security

BOLLARDS

Bollard 016 CAST ALUMINIUM

| 870 mm

Specifications Cylindrical bollard with a cylindrical base. Made from polished or painted cast aluminium, as required.

Colour: DB 703, Design: “hammer.runge design”

Fixed mounting 3p-Technology Cast aluminium

016.001

Ground rosette

000.031

016.020

Fold down

Optional rosette

016.005

Vertical cut Horizontal cut

870 300/500

300

Height above ground level: 870 mm Diameter: 85 mm / 98 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

870

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 009 009-1 | CAST ALUMINIUM | 870 mm 009-2 | CAST ALUMINIUM | 1200 mm

Specifications Cylindrical bollard with a conical base. Made from polished or painted cast aluminium, as required.

Colour: DB 703, Design: “hammer.runge design“

Fixed mounting

3p-Technology

009-1 | 870 | cast aluminium

009.001

009.020

009-2 | 1200 | cast aluminium

009.001.120

009.020.120

870 | 1200

Height above ground level: 870 mm | 1200 mm Diameter: 85 mm / 120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg | 13 kg (for fixed mounting + 1.5 kg)

300/500

300

120

Registered design M 9801747.0

Measurements

ABES Online-Shop 24/7: www.abes-online.com

BOLLARDS

Bollard 027 027-1 | CAST ALUMINIUM | 600 mm 027-2 | CAST ALUMINIUM | 870 mm

Specifications Cylindrical bollard with a groove at the top and a cylindrical base. Made from polished or painted cast aluminium.

Colour: DB 703, Design: “hammer.runge design”

Finish

Special models

·· Powder coating in standard RAL colours or DB 703

Embellished with logo

Fixed mount.

3p-Techn.

3p-High Fold down

027-1 | 600 | cast alum.

027.001.060

027.020.060

027-2 | 870 | cast alum.

027.001

027.020

027.030

027.005

Ground rosette

000.031

Optional rosette Vertical cut Horizontal cut

600 | 870 300/500

300

Height above ground level: 600 mm | 870 mm Diameter: 85 mm / 98 mm Height ground shell: 300 mm or 500 mm Weight: approx. 7 kg | 10 kg (for fixed mounting + 1.5 kg)

600 | 870

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 043 CAST ALUMINIUM

| 870 mm

Specifications Cylindrical bollard with a circumferential groove and a conically tapering base. Made from either polished or powder coated cast aluminium.

Colour: DB 703, Design: “hammer.runge design”

Cast aluminium

Fixed mounting

3p-Technology

043.001

043.020

870

Height above ground level: 870 mm Diameter: 85 mm / 120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

300/500

300

120

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 010 CAST ALUMINIUM

| 870 mm

Specifications Cylindrical bollard with three grooves and a cylindrical base. Made from polished or painted cast aluminium, as required.

Colour: DB 703, Design: “hammer.runge design“

Finish

Special models

·· Powder coating in standard RAL colours or DB 703

2 grooves w/ reflecting paint, 1 powder coated ring, 1 ring of reflective tape (see page 23)

Also available for other models.

Fixed mounting 3p-Technology Cast aluminium

010.001

Ground rosette

000.031

010.020

Fold down

Optional rosette

010.005

Vertical cut Horizontal cut

870 300/500

300

Height above ground level: 870 mm Diameter: 85 mm / 98 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

870

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 008 CAST ALUMINIUM

| 870 mm

Specifications Cylindrical bollard with three circumferential grooves and a conical base. Made from polished or painted cast aluminium, as required.

ALSO AVAILABLE AS A LIGHTING BOLLARD! (See p. 86) Colour: DB 703, Design: “hammer.runge design“

Cast aluminium

Fixed mounting

3p-Technology

008.001

008.020

870

Height above ground level: 870 mm Diameter: 85 mm / 120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

300/500

300

120

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 001-1 CAST ALUMINIUM

| 520 mm

Specifications Cylindrical bollard made from cast aluminium with five circumferential grooves and a conical base.

Colour: DB 703, Design: “hammer.runge design”

Cast aluminium

Fixed mounting

3p-Technology

001.011

001.040

520

300/500

120

300

Height above ground level: 520 mm Diameter: 75 mm / 120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 7 kg (for fixed mounting + 1.5 kg)

520

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 001 CAST ALUMINIUM

| 870 mm

Specifications Cylindrical bollard with ten circumferential grooves and a conical base. Made from polished or painted cast aluminium, as required.

Colour: DB 703, Design: “hammer.runge design”

Cast aluminium

Fixed mounting

3p-Technology

001.001

001.020

870

Height above ground level: 870 mm Diameter: 85 mm / 120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

300/500

300

120

Registered design M 9801747.0

Measurements

Walferdange PROJECT

BOLLARDS

Bollard 019 CAST ALUMINIUM

| 850 mm

Specifications Conical cast aluminium bollard with four wing-like side parts which taper further up into eyelets. The top is domed.

Colour: DB 703

Cast aluminium

160

Fixed mounting

3p-Technology

019.001

019.020

160

850

300

300/500

Measurements Height above ground level: 850 mm Diameter: 160 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11.5 kg (for fixed mounting + 1.5 kg)

ABES Online-Shop 24/7: www.abes-online.com

BOLLARDS

Bollard 004 CAST ALUMINIUM

| 820 mm

Specifications Cone-shaped bollard made from cast aluminium with a circumferential ring which optically separates the top from the rest of the bollard, and a second broader circumferential ring at the base.

Colour: RAL 7016 Anthracite grey

Fixed mounting 3p-Technology Cast aluminium

004.001

004.020

3p-High 004.030

112

820 180

300/500

180

300

Height above ground level: 820 mm Diameter: 112 mm /180 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11.9 kg (for fixed mounting + 1.5 kg)

820

Measurements

BOLLARDS

Bollard 013 CAST ALUMINIUM

| 820 mm

Specifications Slightly cone-shaped bollard made from cast aluminium with a circumferential ring which optically separates the top from the rest of the bollard, and a second broader circumferential ring at the base.

Colour: RAL 7016 Anthracite grey

Fixed mounting 3p-Technology Cast aluminium

125

013.001

013.020

3p-High 013.030

125

820

Measurements

160

300/500

300

160

Height above ground level: 820 mm Diameter: 125 mm /160 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11.9 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 024 CAST ALUMINIUM

| 870 mm

Specifications Cylindrical bollard made from cast aluminium with a cast recess separating the bollard optically from its top and a distinct cylindrical base.

Colour: RAL 7016 Anthracite grey, Design: Thomas Wüsten – GFP

Finish

Special models

·· Powder coating in standard RAL colours or DB 703

Embellished with logo

Cast aluminium

Fxed mounting

3p-Technology

024.001

024.020

870 300/500

100

300

Height above ground level: 870 mm Diameter: 80 mm /100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10.7 kg (for fixed mounting + 1.5 kg)

870

Measurements

BOLLARDS

Bollard 021 021-1 | CAST ALUMINIUM | 600 mm 021-2 | CAST ALUMINIUM | 900 mm

Specifications Cylindrical cast aluminium bollard with a flat top by an accentuated by an elongated recess.

Colour: RAL 7016 Anthracite grey

Fixed mounting

3p-Technology

021-1 | 600 | cast aluminium

021.001.060

021.020.060

021-2 | 900 | cast aluminium

021.001.090

021.020.090

600 | 900

Measurements

300/500

300

100

Height above ground level: 600 mm | 900 mm Diameter: 86 mm /100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 7.8 kg / 10.9 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 038 CAST ALUMINIUM

| 830 mm

Specifications Cylindrical cast aluminium bollard with a circumferential ring below the spherical top piece.

Colour: RAL 7016 Anthracite grey

Cast aluminium

Fixed mounting

3p-Technology

038.001

038.020

830 300/500

100

300

Height above ground level: 830 mm Diameter: 80 mm / 100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 8.5 kg (for fixed mounting + 1.5 kg)

830

Measurements

BOLLARDS

Bollard 040 CAST ALUMINIUM

| 900 mm

Specifications Cylindrical cast aluminium bollard with a top sphere, a peripheral ring below the top, and another ring above the pedestal.

Farbe: DB 703

Cast aluminium

Fixed mounting

3p-Technology

040.001

040.020

900

Measurements

300/500

300

100

Height above ground level: 900 mm Diameter: 82 mm / 100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10.5 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 002 CAST ALUMINIUM

| 820 mm

Specifications Bollard made from cast aluminium with a triangular base and a sphere set on top. The bollard tapers towards its center.

Colour: DB 703, Design: “hammer.runge design“

Cast aluminium

Fixed mounting

3p-Technology

002.001

002.020

140

820

Height above ground level: 820 mm Diameter: 140 mm Height ground shell: 300 mm or 500 mm Weight: approx. 15.5 kg (for fixed mounting + 1.5 kg)

820

Registered design M 9801747.0

Measurements

300/500

300

140

BOLLARDS

Bollard 012 CAST ALUMINIUM

| 820 mm

Specifications Cast aluminium bollard with a triangular base shape and a slightly domed top. The bollard tapers towards the middle.

Colour: RAL 7016 Anthracite grey, Design: “hammer.runge design”

Fixed mounting 3p-Technology Cast aluminium

140

012.001

012.020

3p-High 012.030

140

820

Height above ground level: 820 mm Diameter: 140 mm Height ground shell: 300 mm or 500 mm Weight: approx. 15.5 kg (for fixed mounting + 1.5 kg)

300/500

300

140

Registered design M 9801747.0

Measurements

ABES Online-Shop 24/7: www.abes-online.com

BOLLARDS

Bollard 006-1 CAST ALUMINIUM

| 870 mm

Specifications Conical bollard made from cast aluminium with two castin eyelets at the top.

Colour: DB 703, Design: “hammer.runge design“

Cast aluminium

Fixed mounting

3p-Technology

006.001

006.020

870 300/500

120

300

Height above ground level: 870 mm Diameter: 95 mm / 120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11 kg (for fixed mounting + 1.5 kg)

870

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 006-2 CAST ALUMINIUM

| 870 mm

Specifications Bollard made from cast aluminium tapering towards its middle.

Colour: DB 703, Design: “hammer.runge design”

Cast aluminium

Fixed mounting

3p-Technology

006.201

006.220

870

Height above ground level: 870 mm Diameter: 95 mm / 120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11 kg (for fixed mounting + 1.5 kg)

300/500

300

120

Registered design M 9801747.0

Measurements

BOLLARDS

Bollard 020 CAST ALUMINIUM

| 895 mm

Specifications Cylindrical bollard made from cast aluminium with three circumferential paired rings, several vertical recesses and a flat top.

Colour: DB 703

Cast aluminium

Fixed mounting

3p-Technology

020.001

020.020

Measurements

895

895 300/500

102

300

Height above ground level: 895 mm Diameter: 74 mm / 102 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 022 CAST ALUMINIUM

| 935 mm

Specifications Slightly conical bollard made from cast aluminium with several vertical recesses in the middle section. The upper section is accentuated by a circumferential ring, a smooth surface and a slightly protruding tapering top piece. The base is characterised by a smooth shell enclosed by two rings.

Cast aluminium

140

Fixed mounting

3p-Technology

022.001

022.020

140

935

Measurements Height above ground level: 935 mm Diameter: 140 mm Height ground shell: 300 mm or 500 mm Weight: approx. 12 kg (for fixed mounting + 1.5 kg)

300/500

300

140

BOLLARDS

Bollard 023 CAST ALUMINIUM

| 910 mm

Specifications Cylindrical bollard made from cast aluminium with a top sphere, with a horizontal indentation, and an accentuated base.

Colour: DB 703

Finish ·· Powder coating in standard RAL colours or DB 703 ·· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge ·· For details, see catalogue p. 2-23, price list or online-shop ·· Extended junction piece required for 3p-High

Fixed mounting 3p-Technology Cast aluminium

023.001

023.020

3p-High 023.030

910 300/500

100

300

Height above ground level: 910 mm Diameter: 85 mm / 100 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10.5 kg (for fixed mounting + 1.5 kg)

910

Measurements

BOLLARDS

Bollard 007 CAST ALUMINIUM

| 905 mm

Specifications Cylindrical bollard with a smooth surface, made from cast aluminium with a circumferential groove and a leveled sphere as top piece.

Colour: DB 703

Fixed mounting 3p-Technology Cast aluminium

007.001

007.020

3p-High 007.030

905

Measurements

300/500

300

Height above ground level: 905 mm Diameter: 84 mm / 98 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 037-1 | 055-1 037-1 | CAST ALUMINIUM | 220 · 720 mm 055-1 | CAST ALUMINIUM | 180 · 600 mm

Specifications Cylindrical bollard made from cast aluminium with a flat top.

CAN ALSO BE USED AS SEATING BOLLARD 180 · 600 ALSO AVAILABLE AS LIGHTING BOLLARD! (See p. 82)

Finish ·· Powder coating in standard RAL colours or DB 703 ·· Flat head surface ·· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge. ·· For details, see catalogue p. 2-23, price list or online-shop

3p-Technology

037-1 | 220 · 720 | Cast alumin.

037.001

037.020

055-1 | 180 · 600 | Cast alumin.

055.001

055.020 Fixed mounting

Fixed mounting

180 | 220

600 | 720

600 | 720 300 / 500

Height above ground level: 600 mm | 720 mm Diameter: 180 mm | 220 mm Height ground shell: 300 mm or 500 mm Weight: approx. 13,5 | 22 kg (Fixed mounting + 1,5 kg)

180 | 220

300

Measurements

BOLLARDS

Bollard 057 CAST ALUMINIUM

| 150 · 1000 mm

Specifications Cylindrical bollard made from cast aluminium with a flat top and a broad ring-shaped recess in the upper region.

ALSO AVAILABLE AS LIGHTING BOLLARD! (See p. 83)

Cast aluminium

150

Fixed mounting

3p-Technology

057.001

057.020

150 100 50

1000

300

300 / 500

Measurements Height above ground level: 1000 mm Diameter: 150 mm Height ground shell: 300 mm or 500 mm Weight: approx. 30 kg (for fixed mounting + 1,5 kg)

ABES Online-Shop 24/7: www.abes-online.com

Manchester PROJECT

BOLLARDS

Bollard 058 CAST ALUMINIUM

| 250 · 1000 mm

Specifications Cylindrical bollard made from cast aluminium with a flat top and a broad ring-shaped recess in the upper region.

Cast aluminium

250

Fixed mounting

3p-Technology

058.001

058.020

250 100 50

1000

300

300 / 500

Measurements Height above ground level: 1000 mm Diameter: 250 mm Height ground shell: 300 mm or 500 mm Weight: approx. 29 kg (for fixed mounting + 1,5 kg)

BOLLARDS

Bollard 063 STEEL

| 1200 mm

Specifications Square bollard made from galvanised steel with rounded corners (approx. 15 mm radius) and a flat top.

Colour: DB 703

ST37 steel

Fixed mounting

3p-Technology

063.001

063.020

100

1200 | acc. to customer’s needs

300

300/500

Measurements Height above ground level: 1200 mm | acc. to customer’s needs Diameter: 100 mm x 100 mm Wall thickness: 6 mm Edge radius: approx. 15 mm Height ground shell: 300 mm or 500 mm Weight: approx. 20 kg (for fixed mounting + 1.5 kg)

BOLLARDS

Bollard 037-2 | 055-2 037-2 | STEEL | 220 · 720 mm 055-2 | STEEL | 180 · 600 mm

Specifications Cylindrical bollard made from steel with a slightly domed top.

CAN ALSO BE USED AS SEATING BOLLARD

Finish ·· Hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703 ·· Stainless steel 1.4301 on request ·· Slightly domed top ·· 2 fixed installation versions (see illustration Fixed mounting I and II) ·· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge. ·· The height can be adjusted individually (surcharge or discount) ·· For details, see catalogue p. 2-23, price list or online-shop

Fixed mounting II 180 | 220

600 | 720 | acc. to customers needs

Fixed mounting I 180 | 220

180 | 220

037-2 | 220 · 720 | ST37 steel

037.101

037.102

037.120

055-2 | 180 · 600 | ST37 steel

055.101

055.102

055.120

Measurements Height above ground level: 600 mm | 720 mm | acc. to cust. needs Diameter: 180 mm | 220 mm Height ground shell: 300 mm or 500 mm Weight: approx. 13,5 | 22 kg (Fixed mounting + 1,5 kg)

300 / 500

300

600 | 720 | acc. to customers needs

Fixed mounting I Fixed mounting II 3p-Techn.

BOLLARDS

Bollard 042 42-1 | STEEL + STAINLESS STEEL | 1000 mm 42-2 | STEEL + STAINLESS STEEL | 1200 mm

Specifications Cylindrical galvanised steel bollard with a slightly domed top.

Colour: DB 703

Finish ·· Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge ·· Powder coating in standard RAL colours or DB 703 ·· Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge. ·· For details, see catalogue p. 2-23, price list or online-shop ·· Extended junction piece required for 3p-High ·· Steel ST37: other lengths available to customer‘s wishes (with surcharge or discount)

Fixed mounting 3p-Technology 042-1 | 1000 | ST37 steel, galv. 042-1 | 1000 | stainl. steel 1.4301

042.001 042.101

3p-High

042.020

042.130

042.120

042.130

042.001.120

042.020.120 042.030.120

042-2 | 1200 | stainl. steel 1.4301 042.101.120

042.120.120 042.130.120

042-2 | 1200 | ST37 steel, galv.

1000 | 1200 | acc. to customer’s needs 300/500

Height above ground level: 1000 mm | 1200 mm | acc. to cust. needs Diameter: 108 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg | 12 kg (for fixed mounting + 1.5 kg)

1000 | 1200 | acc. to customer’s needs

Measurements

108

300

108

BOLLARDS

Bollard 056 STEEL + STAINLESS STEEL | 1000 mm

Specifications Fully cylindrical bollard made from galvanised steel/stainless steel, including a circumferential groove and a slightly domed top.

Surface: stainless steel

Fixed mounting 3p-Technology ST37 steel

056.001

056.020

056.030

Stainless steel 1.4301

056.101

056.120

056.130

1000 | acc. to customer’s needs

1000 | acc. to customer’s needs 300/500

108

300

108

3p-High

Measurements Height above ground level: 1000 mm | acc. to cust. needs Diameter: 108 mm Height ground shell: 300 mm or 500 mm Weight: approx. 11.5 kg (for permanent installation + 1.5 kg)

BOLLARDS

Bollard 066 STEEL

2016

| 900 mm

Specifications Rectangular steel barrier with slightly rounded corners and a flat, square header piece.

Surface: galvanised

Finish

Note

·· Powder coating in standard RAL colours or DB 703

The ground rosette is part of the delivery (3p-Technology).

Ground rosette 135 x 135 mm Cross-section Fixed mounting

3p-Technology

ST37 steel, galvanised

066.001

066.020

ST37 steel, powder coated

066.101

066.120

Ground rosette

000.066

Top view Completely covers the ground shell Material: ST37 steel, hot-dip galvanised and powder coated in bollard colour

900 | acc. to custome‘s needs 300/500

Height above ground level: 900 mm | acc. to customer’s needs Diameter: 70 mm x 70 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg (for fixed mounting + 1.5 kg)

900 | acc. to customer‘s needs

Measurements

300

BOLLARDS

Bollard 065 STEEL

| 900 mm

Specifications Rectangular bollard made from steel with a flat top.

Colour: DB 703

ST37 steel

3p-Technology

065.001

065.020

900 | acc. to customer‘s needs

900 | acc. to custome‘s needs 300/500

300

140

Fixed mounting

Measurements Height above ground level: 900 mm | acc. to customer’s needs Diameter: 70 mm x 140 mm Height ground shell: 300 mm or 500 mm Weight: approx. 13 kg (for fixed mounting + 1.5 kg)

ABES Online-Shop 24/7: www.abes-online.com

LIGHTING BOLLARDS & FEEDER BOLLARDS

LED – BLAZING ROLE MODELS The LED lighting bollards 210, 220, 230 and 240 LED are setting an example in matters of energy consumption. With a power consumption of < 4 watts per hour, they significantly reduce the urban electricity costs compared to conventional light sources. All these models are available with 3p-Technology only.

No risk of ck electric sho 24 V due to low e g a volt

ADVANTAGES AT A GLANCE ·· Significantly lower power consumption by LEDs ·· Considerably longer life than conventional light sources ·· LED unit is replaceable ·· No risk of electric shock, since low voltage ·· The junction piece can be replaced in a few minutes only ·· Quick disassembly for short-term space requirements ·· Ground shell can be covered therefore no risk of tripping

CAST ALUMINIUM

| 870 mm

Specifications Fully cylindrical lighting bollard made from cast aluminium with a flat top. With LED lighting in the header piece, 2 LED strips each with 14 LEDs and Perspex diffuser (PMMA). Operated with 24 V low voltage, 2 m connector cable with plug coupling in the base. Protection type IP 67.

LED LIGHTING BOLLARDS

Lighting-Bollard 210 LED

Mounting Available only with 3p-Technology, comprising a 300 mm ground shell, junction piece with pre-determined breaking point, anti-roll device and cable slot, 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard. Colour: DB 703

Finish ·· Powder coating in standard RAL colours or DB 703 ·· For details, see catalogue p. 2-23, p. 40, price list or online-shop

3p-Technology Lighting-Bollard 210 LED | 6000 K cool white

210.020

Lighting-Bollard 210 LED | 4000 K neutral white

210.120

Lighting-Bollard 210 LED | 2700 K warm white

210.220

Technical information Light unit: 2 LED strips, each with 14 LEDs Power supply: 24 Volt DC Power input: 4 W Luminous flux: approx. 430 lm Reflected beam angle: vertical 360°, horizontal approx. 120° Light colour: 6000 K, 4000 K or 2700 K Protection type: IP 67

870

Measurements Height above ground level: 870 mm Diameter: 98 mm Light strip height: 50 mm Beam: 720 mm Height ground shell: 300 mm or 500 mm Weight: 15.5 kg

300/500

720

LED LIGHTING BOLLARDS

Lighting-Bollard 220 LED CAST ALUMINIUM

| 180 · 600 mm

Specifications Fully cylindrical lighting bollard made from cast aluminium with a flat top. With LED lighting in the lower section, 1 LED strip of 21 LEDs and Perspex diffuser (PMMA). Operated with 24 V low voltage, 2 m connector cable with plug coupling in the base. Protection type IP 67.

Finish ·· Powder coating in standard RAL colours or DB 703 ·· For details, see catalogue p. 2-23, p. 70, price list or online-shop

3p-Technology Lighting-Bollard 220 LED | 6000 K cool white

220.020

Lighting-Bollard 220 LED | 4000 K neutral white

220.120

Lighting-Bollard 220 LED | 2700 K warm white

220.220

Technical information Light unit: 1 LED strip of 21 LEDs Power supply: 24 Volt DC Power input: 3 W Luminous flux: approx. 320 lm Reflected beam angle: vertical 360°, horizontal approx. 120° Light colour: 6000 K, 4000 K or 2700 K Protection type: IP 67

Measurements

600

180

300/500

160

Height above ground level: 600 mm Diameter: 180 mm Light strip height: 35 mm Beam: 198 mm Height ground shell: 300 mm or 500mm Weight: 13.5 kg

CAST ALUMINIUM

| 150 · 1000 mm

Specifications Continuous cylindrical light bollard made from cast aluminium with a flat top. With LED lighting in the header piece, 1 LED strip of 21 LEDs and Perspex diffuser (PMMA). Operated with 24 V low voltage, 2 m connector cable with plug coupling in the base. Protection type IP 67.

LED LIGHTING BOLLARDS

Lighting-Bollard 230 LED

Finish ·· Powder coating in standard RAL colours or DB 703 ·· For details, see catalogue p. 2-23, p. 71, price list or online-shop

3p-Technology Lighting-Bollard 230 LED | 6000 K cool white

230.020

Lighting-Bollard 230 LED | 4000 K neutral white

230.120

Lighting-Bollard 230 LED | 2700 K warm white

230.220

Maßangaben Height above ground level: 1000 mm Diameter: 150 mm Light strip height: 50 mm Beam: 850 mm Height ground shell: 300 mm or 500mm Weight: 13.5 kg

300 / 500

1000

150

(LED) LIGHTING BOLLARDS

Lighting-Bollard 200 (LED) STAINLESS STEEL

2016

| 620 mm

Specifications FIXED MOUNTING: Cylindrical stainless-steel lighting bollard as permanent fixtures. With satined or clear acryl glass. Reflective slats surround the light unit. With standard lighting or energy efficient LED technology. Internal cable plus electric ballast for connection to a 230 Volt (AC) power source. Protection type IP 54. MOUNTING USING 3P-TECHNOLOGY: Cylindrical, removable stainless-steel lighting bollard. With satined or clear acryl glass. Reflective slats surround the light unit. With standard lighting or energy efficient LED technology. Internal cables serve as preparation for connecting additional components. Protection type IP 54.

Lighting-Bollard 200 LED: stainless steel, clear acryl glass, with 3p-Technology

Mounting Fixed mounting (recommended) Alternative: Removable with 3p-Technology, comprising a 300 mm ground shell, junction piece with pre-determined breaking point, anti-roll device and cable slot, 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard.

Lighting-Bollard 200 LED: 3p-Technology, stainless steel, clear acryl glass

Lighting-Bollard 200 LED: stainless steel, clear acryl glass

STAINLESS STEEL 1.4301 Fixed mounting 3p-Technology

Standard lighting, clear acryl glass

200.001

200.020

Standard lighting, satined acryl glass

200.010

200.021

LED stick (3 x 3 LEDs), clear acryl glass

200.101

200.120

LED stick (3 x 3 LEDs), satined acryl glass

200.110

200.121

·· Stainless steel 1.4301 pickled and smoothed ·· Powder coating in standard RAL colours or DB 703 ·· Available with satined or clear acryl glass ·· Supplied with standard Dulux D/E 13 Watt TC-DEL lighting (26 Watt available on request with a surcharge)

(LED) LIGHTING BOLLARDS

Finish

·· Alternative available with LED stick with 3 x 3 LEDs. ·· Lower fitting: hexagon shell safety screws with pin, incl. key ·· For details, see catalogue p. 2-23, price list or online-shop Lighting-Bollard 200: RAL 7016, satined acryl glass, anchor bolting

Technical information LIGHTING-BOLLARD WITH STANDARD LIGHTING Light unit: Osram Dulux TC-DEL 13 Watt Connection voltage: 230 Volt AC Luminous flux: 900 lm Light colour: 830 K (warm white) Protection class 1, protection type IP 54 LIGHTING-BOLLARD WITH LED STICK Light unit: LED stick with 3 x 3 LEDs Connection voltage: 230 Volt AC Power: 9 Watt (incl. 11-Watt driver unit) Luminous flux: 1000 lm Max. power input: 350 mA Light colour: 3000 K (warm white) Protection class 1, protection type IP 54 Lighting-Bollard 200: stainless steel, satined acryl glass

STAINLESS STEEL 1.4301, POWDER COATED

160

620 | acc. to customer‘s needs

154

201.020

Standard lighting, satined acryl glass

201.010

201.021

LED stick (3 x 3 LEDs), clear acryl glass

201.101

201.120

LED stick (3 x 3 LEDs), satined acryl glass

201.110

201.121

Measurements Height above ground level: 620 mm | acc. to customer’s needs Diameter: 154 mm Height ground shell: 300 mm or 500 mm Weight: approx. 6 kg

300/500

160

620 | acc. to customer‘s needs

154

201.001

Lighting-Bollard 200: RAL 7016, satined acryl glass

Fixed mounting 3p-Technology Standard lighting, clear acryl glass

LED LIGHTING BOLLARDS

Lighting-Bollard 240 LED CAST ALUMINIUM

2016

| 870 mm

Specifications Cylindrical cast aluminium bollard with three circumferential grooves and a conical base. Ring-shaped installation of six LED spotlights in V4A stainless steel casing between the first and second groove. Operated with 24 V low voltage, 2 m connector cable with plug coupling in the base. Protection type IP 67.

Finish ·· Powder coating in standard RAL colours or DB 703 ·· For details, see catalogue p. 2-23, p. 51, price list or online-shop

3p-Technology Lighting-Bollard 240 LED | 6000 K cool white

240.020

Lighting-Bollard 240 LED | 2800 K warm white

240.120

Technical information Light unit: 6 x LED spotlights, Ø 25 mm Power supply: 24 Volt DC Luminous flux: 6 x approx. 15 lm Connected wattage: 1.5 W (6 x 0.25 W) Reflected beam angle: vertical 360°, horizontal approx. 120° Light colour: 6000 K (cool white), 2800 K (warm white) Protection type: IP 67

300/500

Height above ground level: 870 mm Diameter: 85 mm / 120 mm Height ground shell: 300 mm or 500 mm Weight: approx. 10 kg

870

Registered design M 9801747.0

Measurements

BOLLARD ASHTRAY

Bollard-Ashtray 525 STEEL + STAINLESS STEEL

| 1000 mm

Specifications Fully cylindrical bollard ashtray with a sloping slot area. Labelling in the form of an outlined, laser-printed cigarette symbol.

THE ONLY BOLLARD ASHTRAY WITH PREDETERMINED BREAKING POINT

Finish ·· Powder coating in standard RAL colours or DB 703 ·· May be unlocked for emptying using a triangular key ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· The height can be adjusted individually (surcharge or discount) ·· For details, see catalogue p. 2-23, price list or online-shop

Fixed mounting

3p-Techn.

With flange to enable screwing

ST37 steel

525.001

525.020

525.040

Stainless steel 1.4301

525.011

525.022

525.140

galvanised / powder coated

108

1000

300

300/500

Measurements Height above ground level: 1000 mm Diameter: 108 mm Height ground shell: 300 mm or 500 mm Weight: approx. 13.5 kg (for fixed mounting + 1.5 kg) Capacity: 3.5 l

ABES Online-Shop 24/7: www.abes-online.com

FEEDER BOLLARDS

Feeder-Bollard 300-1 STEEL

| 1335 mm

Specifications Cylindrical tube with two grooves at the top and a flattened upper end. Access to the internal circuit via a lockable door, including cable slide.

Mounting Screw-on inside the bollard

Colour: DB 703

Finish ·· Hot-dip galvanised steel ST 37, cast aluminium top ·· Powder coating in standard RAL colours or DB 703 ·· Standard design with adapter plate without electricity and water connections ·· Incl. cable slide (operation possible with the flap closed) ·· Equipment to enable electricity and water connections is available on request ·· For details, see catalogue p. 2, price list or online-shop

Fixed mounting 300.010

ST37 steel, top made of cast aluminium, powder coated

245

845 285

Registered design

Height above ground level: 1335 mm Diameter: 245 mm Adapter plate: 440 x 120 mm Weight: approx. 56.5 kg Door height: 845 mm Door width: 225 mm

1335

Measurements

STEEL

| 1340 mm

Specifications Cylindrical tube with a circumferential set-on ring in the top section as well as a hemispherical upper closure. Access to the internal circuit via a lockable door, including cable slide.

FEEDER BOLLARDS

Feeder-Bollard 300-2

Mounting Screw-on inside the bollard

Colour: DB 703

Fixed mounting ST37 steel, top made of cast aluminium, powder coated

300.020

245

285

845

Height above ground level: 1340 mm Diameter: 245 mm Adapter plate: 440 x 120 mm Weight: approx. 56.5 kg Door height: 845 mm Door width: 225 mm

Registered design

1340

Measurements

Since PARK BENCHES are meant to invite passers-by to rest and relax, they should be comfortable. Located in public parks or squares they add to the urban space with their aesthetic appearance. In public places, the bench is not only a resting place or viewpoint: Meeting others, communicating with people of different ages, strangers before, symbolise the function of the bench in the urban context. ABES benches are a tasteful composition of robust steel, stainless steel and aluminium frames, which â&#x20AC;&#x201C; combined with wooden, steel and stainless steel supports â&#x20AC;&#x201C; make a finely designed outdoor furniture. Weatherproof materials and solid anchoring to the ground protect the benches from vandalism and can be installed all year round.

B E N C H 1 0 3 99

92 B E N C H 1 4 1

BENCH 143-2 94

103 BENCH 121-2

BENCHES & TABLES 1 06 B E N C H 1 0 4

PARK BENCH

Bench 141 141-1 | WITHOUT BACK REST 141-2 | WITH BACK REST Specifications Park bench without back rest, consisting of two semi-circular steel side parts capable of holding five wooden slats ending level with the steel frames. Optionally includes a back rest consisting of three wooden slats connected to steel girder.

Colour: DB 703, Design: Stefan Wehrmann 3Dsign

Mounting Screw-on

Finish ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· Seating slats made from hardwood ·· The following changes are possible for an extra price: colour, length and wooden surface ·· For details, see catalogue p. 2, price list or online-shop

Colour: DB 703, Design: Stefan Wehrmann 3Dsign

Steel ST37 141-1 | without back rest | 1800 mm

141.001

141-2 | with back rest | 1800 mm

141.101

537

2240

823

Measurements

453

430

1800

Total width: 2240 mm Height with back rest: 823 mm Total depth with back rest: 537 mm Seat height: 453 mm Weight: without b. r. approx. 22 kg with b. r. approx. 27 kg

PARK BENCH

Bench 142 142-1 | WITHOUT BACK REST 142-2 | WITH BACK REST Specifications Colour: DB 703, Design: Stefan Wehrmann 3Dsign

Park bench without back rest, consisting of two steel side parts bent outwards at the top, capable of holding five wooden slats. The side parts are higher than the seating slats and serve as armrests. Optionally includes a back rest consisting of three wooden slats connected to steel girders.

Mounting Screw-on

·· For details, see catalogue p. 2, price list or online-shop

Steel ST37 142-1 | without back rest | 1800 mm

142.001

142-1 | without back rest | 520 mm

142.002

142-2 | with back rest | 1800 mm

142.101

142-2 | with back rest | 520 mm

142.102

Colour: DB 703, Design: Stefan Wehrmann 3Dsign

Measurements STOOL Total width: 722 mm Weight: stool without b. r. approx. 16 kg chair with b. r. approx. 20 kg

Total width: 2002 mm Height with back rest: 821 mm Total depth with back rest: 542 mm Seat height: 453 mm Weight: without b. r. approx. 22 kg with b. r. approx. 27 kg

520

542

2002

722

821

Measurements BENCH

1800

453

440

PARK BENCH & TABLE

Bench 143 143-1 | WITHOUT BACK REST 143-2 | WITH BACK REST Specifications Park bench without back rest, consisting of two perpendicular side parts made from steel profiles, which hold five wooden slats. Optionally includes a back rest consisting of three wooden slats connected to steel girders.

Mounting Screw-on, free standing or concrete embedment

Table 143 Specifications Table consisting of two perpendicular side parts made from steel profiles and a rectangular steel frame into which eight wooden slats are set flush. The lower areas of the side parts are stabilised lengthways and diagonally by supports.

Mounting Screw-on, free standing or concrete embedment

Measurements TABLE

750

735

1587

Lenght: 1587 mm Width: 735 mm Height: 750 mm Weight: approx. 31 kg

143-1 | WITHOUT BACK REST 143-2 | WITH BACK REST Finish ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· Seating slats made from hardwood ·· The following changes are possible for an extra price: colour, length and wooden surface ·· For details, see catalogue p. 2, price list or online-shop

PARK BENCH & TABLE

Bench 143

Colour: DB 703, Design: Stefan Wehrmann 3Dsign, (Version: screw-on)

Steel ST37 for concrete embedding

Steel ST37 for screwing

143-1 | without back rest | 1800 mm

143.051

143.001

143-1 | without back rest | 1500 mm

143.053

143.003

143-1 | without back rest | 520 mm

143.052

143.002

143-2 | with back rest | 1800 mm

143.151

143.101

143-2 | with back rest | 1500 mm

143.153

143.103

143-2 | with back rest | 520 mm

143.152

143.102

143 | table

143.550

143.500

Measurements BENCH

444

544

520

1890/1590

610

453

823

Measurements STOOL Total width: 610 mm Weight: without b. r. approx. 13 kg Chair with b. r. approx. 16 kg

1800/1500

453

Total width: 1890 / 1590 mm Height with back rest: 823 mm Total depth with back rest: 544 mm Seat height: 453 mm Weight: without b. r. approx. 18 kg with b. r. approx. 23 kg

ABES Online-Shop 24/7: www.abes-online.com

PARK BENCH & TABLE

Bench 144 144-1 | WITHOUT BACK REST 144-2 | WITH BACK REST Specifications Park bench without back rest, consisting of two T-shaped side parts made from steel profiles, connected to a rectangular steel frame into which four wooden slats are set flush as a seating slat. Optionally includes a back rest consisting of three wooden slats connected to steel girders.

Mounting Screw-on or concrete embedment Colour: DB 703, Design: Stefan Wehrmann 3Dsign, (Version: screw-on)

Table 144 Specifications Table consisting of two T-shaped side parts made from steel profiles, connected to a rectangular steel frame into which eight wooden slats are set flush. The lower areas of the side parts are stabilised lengthways by a support.

Mounting Screw-on or concrete embedment

Measurements TABLE

750

735

1587

Length: 1587 mm Width: 735 mm Height: 750 mm Weight: approx. 31 kg

144-1 | WITHOUT BACK REST 144-2 | WITH BACK REST Finish ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· Seating slats made from hardwood ·· The following changes are possible for an extra price: colour, length and wooden surface ·· For details, see catalogue p. 2, price list or online-shop

PARK BENCH & TABLE

Bench 144

Colour: DB 703, Design: Stefan Wehrmann 3Dsign, (Version: screw-on)

Steel ST37 for concrete embedding

Steel ST37 for screwing

144-1 | without back rest

144.051

144.001

144-2 | with back rest

144.151

144.101

144 | table

144.550

144.500

1587

544

1527

813

Total width: 1587 mm Height with back rest: 813 mm Total depth with back rest: 544 mm Seat height: 453 mm Weight: without b. r. approx. 18 kg with b. r. approx. 23 kg

453

Measurements BENCH

453

400

STOOL & TABLE

Stool 145 | Table 145 Specifications STOOL Stool consisting of a revolving square steel frame sitting on a steel profile and into which four wooden slats are set flush.

Specifications TABLE Table consisting of an encompassing square steel frame which sits on a steel profile and into which six wooden slats are set flush.

Mounting Screw-on or concrete embedment

Colour: DB 703, Design: Stefan Wehrmann 3Dsign (Version: screw-on)

Steel ST37 for concrete embedding

Steel ST37 for screwing

145 | stool

145.051

145.001

145 | table

145.550

145.500

Length: 401 mm Width: 401 mm Seat width: 342 mm Height: 453 mm Weight: approx. 9 kg

453

Measurements STOOL 401

401

120

Length: 574 mm Width: 574 mm Height: 750 mm Weight: approx. 12 kg

750

Measurements TABLE 574

574

120

WITH WOODEN SUPPORT

Specifications Park bench steel tubes made of bent and adjusted to miter with two diagonally opposite back rests. The steel frame is designed to accommodate seating supports and back rests made of wood.

PARK BENCH

Bench 103

Mounting Screw-on (recommended) or free standing

Finish Surface: stainless steel, Design: Charles O. Job

·· Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· For details, see catalogue p. 2, price list or online-shop

103 | seat sheet wood

Steel ST37

Stainless steel 1.4301

103.102

103.103

Surface: stainless steel, Design: Charles O. Job

Measurements 730

2380

Registered design 129813

835

450

430

Total width: 2380 mm Total depth: 730 mm Seat height: 430 mm Total height: 835 mm Weight: approx. 62,5 kg

PARK BENCH

Bench 131

120°

340

90°

170

170 170

Bench bollard as 180° series junction with an extension option

Bench bollard as rightangle junction with an option for a 90° connection

Bench bollard as end piece without connection options

Bench bollard as 120° star-shaped junction with extension options in three directions.

Sample configurations

180° series junction 90° right-angle junction

120° star-shaped formation 90° right-angle junction Bench bollard without connection options

Example of a Bench 131 Fixed mounting Removable with (3p-Technology)*

2 cast alum. bench bollards 1 set of hardwood bench seats

2 x 131.004

2 x 131.005

1 x 132.001

Registered design M 9801747.0

Example of a triangular Bench 131 star-shaped Fixed mounting Removable with (3p-Technology)*

3 x 131.004

3 x 131.005

1 120° star-shaped bench bollard 1 x 131.010

1 x 131.011

3 cast alum. bench bollards 3 set of hardwood bench seats

100

3 x 132.001

* Bench 131 equipment (removable with 3p-Technology)

·· Ground shell 300 mm (000.001) ·· Junction piece (000.008) ·· Clamping cone set with hex head bolt (000.004)

Specifications Bench system without back rest, made from at least two conical cast aluminium bollards with a diameter of 220 mm at the base. The upper end serves to support three seating slats. Each bench bollard has a groove all around the top to distinguish the bollards from the seat support.

PARK BENCH

Bench 131

Mounting Removable with 3p-Technology, comprising a 300 mm ground shell, junction piece with pre-determined breaking point (without antiroll device), 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard. Alternative: concrete embedment Colour: DB 703, Design: “hammer.runge design”

Finish ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· Seating slats made from hardwood ·· The following changes are possible for an extra price: colour and wooden surface ·· For details, see catalogue p. 2-23, price list or online-shop Colour: DB 703, Design: “hammer.runge design”

Fixed mounting

Removable (3p-Technology)*

Bench bollard as endpiece

131.004

131.005

90° right-angle junction

131.006

131.007

180° series junction

131.008

131.009

120° star-shaped formation

131.010

1 set of hardwood bench seats

131.011 132.001

Measurements Registered design M 9801747.0

340

1500

450

Width: 1500 mm Depth: 340 mm Seat height: 450 mm Weight of the bench bollard: approx. 17 kg Weight: approx. 48 kg (fixed mounting + 3 kg)

101

PARK BENCH

Bench 121 121-1 | WITHOUT BACK REST Specifications Bench system without back rest, made from two conical cast aluminium bollards with a diameter of 220 mm at the base. The upper end serves to support 14 seat strips. Each bench bollard has a groove all around the top to distinguish the bollards from the seat support. Colour: DB 703, seat covering: Stainless steel, Design: “hammer.runge design”

Fixed mounting

Removable (3p-Technology) *

Bench bollard as endpiece

121.004

121.005

90° right-angle junction

121.006

121.007

180° series junction

121.008

121.009

120° star-shaped formation

121.010

121.011

Steel ST37, powder coated

Stainless steel 1.4301

1 set of bench seats

121.200

121.210

Back rest

121.100

121.110

Registered design M 9801747.0

2060

458

340

102

1500

Measurements Total width: 2060 mm Depth: 340 mm Seat height: 458 mm Weight of the bench bollard: approx. 17 kg Weight: approx. 48 kg (fixed mounting + 3 kg)

121-2 | WITH BACK REST Specifications

Colour: DB 703, seat covering: Stainless steel, Design: “hammer.runge design”

Bench system with back rest, consisting of two conical cast aluminium bollards with a diameter of 220 mm at the base. The bollard head supports steel or stainless steel tubes. Each bench bollard has a circular groove separating the bollard from the head section. The back rest is connected to the rear tube of the seat support on sickle-shaped suspensions.

PARK BENCH

Bench 121

Finish ·· Bench bollard powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· For details, see catalogue p. 2-23, price list or online-shop

2060

Measurements

528

Registered design M 9801747.0

1500

820

340

458

Total width: 2060 mm Total height: 820 mm Total depth with back rest: 528 mm Seat height: 458 mm Weight of bench bollard: approx. 17 kg Weight: approx. 61 kg (fixed mounting + 3 kg)

ABES Online-Shop 24/7: www.abes-online.com

103

PARK BENCH

Bench 121 121-1 | WITHOUT BACK REST 121-2 | WITH BACK REST Sample Configurations 90째 right-angle junction 90째 right-angle junction

Bench bollard without connection options

180째 series junction

120째 star-shaped formation

Registered design M 9801747.0

Bench seat without back rest

104

Bench seat with back rest

PARK BENCH

Bench 121

120°

340

90° 120°

120° 200

Bench bollard as end piece without without connection options

200

Bench bollard as rightangle junction with an option for a 90° connection

200

Bench bollard as 180° series junction with an extension option

Bench bollard as 120° star-shaped junction with extension options in three directions

Example of a single Bench 121 with backrest Fixed mounting Removable (3p-Techn.) *

2 cast aluminium bench bollards

2 x 121.004

2 x 121.005

1 set of bench seats (stainless steel)

1 x 121.210

Back rest (stainless steel)

1 x 121.110

Fixed mounting Removable (3p-Techn.) *

3 cast aluminium bench bollards

3 x 121.004

3 x 121.005

1 120° star-shaped bench bollard

1 x 121.010

1 x 121.011

3 sets of bench seats (stainless steel)

3 x 121.210

Registered design M 9801747.0

* Bench 121 equipment

Example of a star-shaped Bench 121

(removable with 3p-Technology)

·· Ground shell 300 mm (000.001) ·· Junction piece (000.008) ·· Clamping cone set with hex head bolt (000.004)

105

PARK BENCH

Sample configurations Semi-circle

Triple linear S form with 45° units

Open ¾ circle S form with 90° units

Cast aluminium

106

Seating unit, straight

104.101

Seating unit, bent 45°

104.201

Seating unit, bent 90°

104.202

Leg

104.301

Accessory for the leg as end piece

104.350

Specifications Cast aluminium bench system without back rest, consisting of four basic units. The system has a modular construction.

PARK BENCH

Bench 104

·· A straight seating unit ·· A seating unit bent at a 45° angle ·· A seating unit bent at a 90° angle ·· Base with inward-facing legs, joined to a plate at the lower end, with the upper end of the plate supporting the seating units

Mounting Screw-on or free standing

Colour: DB 703

Finish ·· Powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· For details, see catalogue p. 2, price list or online-shop

420

45°

941

Width of straight seating unit: 970 mm Width of straigh seating unit bent 45°: 1054 mm Width of straigh seating unit bent 90°: 941 mm Total depth of element: 420 mm Seat height: 452 mm Weight of seating element: approx. 10 kg Weight of leg: approx. 4 kg

1054

Measurements

90°

970

452

443

Diameter full circle 90°: interior 550 mm, exterior: 1390 mm Diameter full circle 45°: interior 1950 mm, exterior: 2790 mm

107

PARK BENCH

Bench 107 107-1 | WITHOUT BACK REST 107-2 | WITH BACK REST Specifications Park bench without back rest, consisting of two U-shaped steel tube frames including mounting options for a seating slat made from several steel tube profiles. Optionally includes a back rest connected to the rear tube of the seating slat on sickle-shaped suspensions.

Mounting Screw-on Colour: DB 703

Finish ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· For details, see catalogue p. 2, price list or online-shop

Steel ST37 Stainless steel 1.4301 107-1 | without back rest | 1500 mm

107.001

107.003

107-2 | with back rest | 1500 mm

107.101

107.103 Colour: DB 703

ALSO AVAILABLE AS BENCH FOR SENIOR CITIZEN ·· 10 cm higher ·· Seating surface tilted slightly forward ·· 10 % surcharge

340

1585

576

Measurements

437

840

522

108

1500

Total width: 1585 mm Seat depth: 340 mm Seat height: 437 mm Height without back rest: 576 mm Height with back rest: 840 mm Total depth with back rest: 522 mm

PARK BENCH

Bench 100 «THE ORIGINAL DESIGN»

Specifications Park bench with back rest made from 140 mm wide steel profiles to hold the wooden slats. The profiles are bent and closed at the footing. The wooden slats align with the frames.

Mounting Screw-on or free standing

Project: Australia

Finish ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· Seating slats made from hardwood ·· The following changes are possible for an extra price: colour and wooden surface ·· For details, see catalogue p. 2, price list or online-shop

100 | with back rest | 1700 mm

Steel ST37

Stainless steel 1.4301

100.002

100.003

Surface: stainless steel, Design: ”hammer.runge design”

Measurements

1700

420

740

760

Registered design 129813

Width: 1700 mm Total height: 740 mm Total depth: 760 mm Seat height: 420 mm Weight: approx. 79 kg

109

LEAN-ON ELEMENT

Lean-On-Bench 108

Specifications Back to top widening lean-on element with a curved profile. The upper half is equipped with a wooden covering.

Mounting Screw-on or concrete embedment

WITH THE BOLLARD-ASHTRAY 525 SUITABLE E.G. FOR SMOKE BREAKS (see photo) Colour: DB 703, Design: J.P. Gillen

Finish ·· Powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· Can also be supplied in cast aluminium, if desired ·· Lean-on surface made of wood ·· For details, see catalogue p. 2, price list or online-shop

Steel ST37

For screwing

For concrete embedding

108.101

108.151

300

740

110

1250 660

Height: 1250 mm Width above: 740 mm Width below: 460 mm Depth: 300 mm Weight: approx. 105 kg

590

Measurements

460

Specifications One-piece seat bollard made from cast aluminium with small diamond-shaped apertures in the circular seat supported by a cylindrical leg, tapering slightly at the base.

SEATING BOLLARD

Seating-Bollard 105

Finish ·· Powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· For details, see catalogue p. 2-23, price list or online-shop

Cast aluminium

350

3p-Technology

105.001

105.101

Measurements

450

Fixed mounting

Seat height: 450 mm Diameter: 350 mm Plinth diameter: 120 mm Weight: approx. 8 kg Height ground shell: 300 mm or 500 mm

300/500

300

120

ABES Online-Shop 24/7: www.abes-online.com

111

WASTE CONTAINERS are essential for a well-kept urban environment. ABESâ&#x20AC;&#x2122; models impress with their sophisticated functionality and attractive design, and fit perfectly into the cityscape. The containers are robust and resistant to vandalism. They are supplied with a cover to prevent rainwater from leaking in, as well as from having unwanted household waste disposed of here. Separate internal buckets facilitate cleaning, thereby ensuring hygienic waste disposal.

WASTE-CONTAINER 523 118

115 WASTE-CONTAINER 531

WASTE-CONTAINER 529 1 1 7

1 2 3 WASTE-CONTAINER 515

WASTE CONTAINERS 1 19 WASTE-CONTAINER 524

Waste-Container 527 - 531 PRACTICAL BUT STYLISH This type of waste container combines functionality with design. Its classic cylindrical shape fits into any cityscape. Its strong outer shell is extremely damage resistant and also provides enough space for signs or billboards. When combined with the optional 3p-Flex junction piece, the waste container is even more resistant to everyday (traffic) inconveniences.

ADVANTAGES AT A GLANCE ·· Waste container stands completely firm without moving ·· Thanks to its solid shell, the container generally remains undamaged after an impact ·· Over 90 % cost reduction for repairs ·· Junction piece can be replaced in less than 3 minutes ·· Only one call-out – reduced staff and vehicle costs ·· Repair work does not have to be done on site ·· Quick to disassemble if more space is needed at short notice ·· Ground shells can be locked to prevent risk of tripping

114

527 | STEEL + STAINLESS STEEL | 75 liters 531 | STEEL | 50 liters

Specifications Cylindrical steel waste container with O-shaped, sloping slot area and separate cigarette slot. The container comes with an assembled bollard.

WASTE CONTAINER

Waste-Container 527 | 531

Finish ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· Cigarette slot: Stainless steel 1.4301 ·· Incl. internal container ·· May be unlocked for emptying using a triangular key ·· For details, see catalogue p. 2-23, price list or online-shop

350 | 400

ST37 steel

Stainless steel 1.4301

527 | 75 liters | fixed mounting

527.001

527.011

527 | 75 liters | with 3p-Technology

527.020

527.022

531 | 50 liters | fixed mounting

531.001

531 | 50 liters | with 3p-Technology

531.020

1027 | 1181

807 | 961

Capacity: approx. 50 l / 75 l Height above ground with bollard: 1027 mm / 1181 mm Container height: 807 mm / 961 mm Container diameter: 350 mm / 400 mm Weight: approx. 37 kg / 40 kg

300/500

300

220

1027 | 1181

Measurements 50 l / 75 l

115

WASTE CONTAINER Patented system:

SIMPLE DISASSEMBLY AND ASSEMBLY THANKS TO 3P-TECHNOLOGY Unscrew

Remove junction piece

Lift waste container out

Finished

Insert junction piece

Set up waste container

Screw in tightly

Finished

116

529 | STEEL + STAINLESS STEEL | 75 liters 530 | STEEL | 50 liters

Specifications Cylindrical steel waste container with O-shaped, horizontal slot area and separate cigarette slot. The container comes with an assembled bollard.

WASTE CONTAINER

Waste-Container 529 | 530

Finish ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· Cigarette slot: Stainless steel 1.4301 ·· Incl. internal container ·· May be unlocked for emptying using a triangular key ·· For details, see catalogue p. 2-23, price list or online-shop

350 | 400

ST37 steel

Stainless steel 1.4301

529 | 75 liters | fixed mounting

529.001

529.011

529 | 75 liters | with 3p-Technology

529.020

529.022

530 | 50 liters | fixed mounting

530.001

530 | 50 liters | with 3p-Technology

530.020

855 | 910

635 | 690

Capacity: approx. 50 l / 75 l Height above ground with bollard: 855 mm / 910 mm Container height: 635 mm / 690 mm Container diameter: 350 mm / 400 mm Weight: approx. 37 kg / 40 kg

300/500

300

220

855 | 910

Measurements 50 l / 75 l

117

WASTE CONTAINER

Waste-Container 523 STEEL

| 50 liters

Specifications The first part of the stand-alone waste container consists of a frame made from two parallel tubes, connected by a lower and an upper rim as well as a cover, the second part consists of a cylindrical steel container to be hung into the frame. The container can be swung off the frame. The container is attached to the ground from the inside. Contents approx. 50 l

Mounting On the ground from the interior of the container base

Design: „hammer.runge design“ and Heiko Zetzschke Colour: DB 703

Finish ·· Powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· Incl. internal container or alternatively with spikes to hold bin liners ·· Cover including ashtray available as an optional accessory ·· May be unlocked for emptying using a triangular key ·· For details, see catalogue p. 2, price list or online-shop

Waste-Container 523

ST37 steel, powder coated

523.002

Ashtray, stainless steel 1.4301, integrated in cover

500.001

420

Capacity: approx. 50 l Total height of the container including cover: 975 mm Outside diameter: 420 mm Weight: approx. 24 kg

118

975

Measurements

STEEL

| 40 liters

Specifications Cylindrical waste container covered with a lid and holding a capacity of approx. 40 l, affixed to a circular post. A triangular lock must be opened to to empty the container.

WASTE CONTAINER

Waste-Container 524

Mounting Concrete embedment or insertion into a standard ground shell (not 3p-Technology)

Colour: DB 703

Finish ·· Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· Incl. internal container ·· May be unlocked for emptying using a triangular key ·· For details, see catalogue p. 2, price list or online-shop

Waste-Container 524

ST37 steel, galvanised

524.001

ST37 steel, powder coated

524.002

620

385

1100

Measurements Capacity: approx. 40 l Height above ground: 1100 mm Container diameter: 385 mm Diameter of round post: 60,3 x 1,5 mm Weight: approx. 9 kg

ABES Online-Shop 24/7: www.abes-online.com

119

WASTE CONTAINER

Waste-Container 532

With bag dispenser (e.g. for dog waste bags) STAINLESS STEEL

| 35 liters

Specifications Waste container of stainless steel, powder coated, with rearwards-sloping cover (no depositing possible) and integrated refillable bag dispenser at the front.

Mounting For concrete embedding on a galvanised post (Ø approx. 81 mm) Alternatives: ·· For screwing on ground ·· For post/mast or wall fixing ·· Removable with 3p-Technology, comprising a post (Ø 108 mm), a 300 mm ground shell, junction piece with pre-determined breaking point (without anti-roll device), 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard.

Colour: RAL 1021 Colza yellow, RAL 6018 Yellow green

Finish ·· Container, stainless steel 1.4301, powder coated in RAL 1021 Colza yellow and RAL 6018 Yellow green ·· Other colours available on request at a surcharge ·· Post, galvanised, powder coating in standard RAL colours or DB 703 with a surcharge ·· Integrated refillable bag dispenser, e.g. for dog excrements, see price list for bags ·· Central locking ·· For details, see catalogue p. 10-23, price list or online-shop

Waste-Container 532

Container with post, for concrete embedding

532.001

Container with post, with 3p-Technology

532.020

Container with post, for screwing

532.040

Container for post or mast fixing

532.060

Container for wall fixing

532.061 330

280

590 960 300/500

370

960 370

Capacity: approx. 35l Width : 330 mm Depth: 280 mm Height: 590 mm Height with foot: 960 mm Bag holder capacity: 400-500 bags Weight: approx. 13,5 kg

590

Measurements

120

Bag dispenser (e.g. for dog waste bags) STEEL

| 500-600 bags

Specifications Robust rectangular housing of galvanised steel, powder coated, with lock fixed at side and a lower opening at the front. Suspension system for refill bag on the inside of the housing.

WASTE CONTAINER

Waste-Container 533

Capacity: 400-500 bags

Mounting Post/mast or wall fixing Colour: RAL 1021 Colza yellow

Notice

Finish

The Waste-Container 533 can directly be mounted next to or above the already existing waste container.

·· Steel galvanised and powder coated in RAL 1021 Colza yellow ·· For details, see price list or online-shop

533

Bag dispenser, galvanized steel for post or mast fixing

533.060

Bag dispenser, galvanized steel for wall fixing

533.061

ADVANTAGES AT A GLANCE ·· Economical ·· Operational secure system with block bags that can be torn off ·· No trash aperture ·· Slanted cover – no item depositing ·· Simple and rational servicing ·· Central lock locking ·· For 35 l standard trash sacks ·· High resistance to vandalism ·· Universal container for installation

121

BOLLARD ASHTRAY

Bollard-Ashtray 525 STEEL + STAINLESS STEEL

| 1000 mm

Specifications Fully cylindrical bollard ashtray with a sloping slot area. Labelling in the form of an outlined, laser-printed cigarette symbol.

Colour: DB 703

THE ONLY BOLLARD ASHTRAY WITH PREDETERMINED BREAKING POINT

Fixed mounting

3p-Techn.

With flange to enable screwing

ST37 steel

525.001

525.020

525.040

Stainless steel 1.4301

525.011

525.022

525.140

galvanised / powder coated

108

122

1000

300

300/500

Measurements Height above ground level: 1000 mm Diameter: 108 mm Height ground shell: 300 mm or 500 mm Weight: approx. 13.5 kg (for fixed mounting + 1.5 kg) Capacity: 3.5 l

STEEL

2016

| 30 liters

Specifications Top-opening, cylindrical waste container with approx. 30 liters capacity, made from solid sheet steel, for post or wall-mounting. Horizontal rings along the body for visual compartmentalisation. Circular laser-cut patterns at the top, and bar-shaped recesses in the lower area. The basic shape is folded at the edges, while the area nearing the base is cambered. Uncovered opening at the top, closed base with water drains.

WASTE CONTAINER

Waste-Container 515

Alternative: Customised laser cuts available on all parts of the unit upon request and for a surcharge (example pictured: with ABES logo).

Mounting Colour: DB 703, Bollard 014-2 optional

Container may be removed via snap lock and triangular lock on the mounting, enabling easy emptying and cleaning. ·· For post/mast or wall fixing ·· Waste-Container 515 may be combined with a cylindrical ABES bollard (see photo) upon request.

Finish ·· Powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· Excl. internal container ·· Without bollard ·· May be unlocked for emptying using a triangular key ·· For details, see catalogue p. 2-23, price list or online-shop

ST37 steel, galvanised

515.001

ST37 steel, powder coated

515.101

320

Capacity: approx. 30 l Diameter: approx. 320 mm Height: approx. 460 mm Weight: approx. 4,3 kg

Customised laser cuts available upon request. The example shows personalised stripes: WasteContainer 515 with ABES logo

300

1000

460

Measurements

123

Bollard 014-2 optional

Waste-Container 515

ABES BICYCLE STANDS are characterised by functionality and modern design, provide a firm grip and prevent the bikes from falling over, or having their wheels bent. The stands also allow bikes to be locked up securely, thereby protecting them from theft. The shape and function of the Bicycle-Stand 450-1 was given the â&#x20AC;&#x153;red dotâ&#x20AC;? award by the NRW Design Centre for its high design quality. The bicycle stands offer a wide variety of setup combinations, allowing different sized groups of stands to be combined. Their sophisticated design makes the various stands attractive objects in the urban setting. The tube constructions can by fitted with a curved cover, making it harder for the bikes to roll away, which allows them to be parked without risk to other road users.

BICYCL E- ST AND 450- 1 131

127 B I C YC L E - STA N D 4 5 3

B I C Y C LE-S TA N D 4 5 0 -2 1 3 3

124

1 2 9 B I C Y C LE-S TA N D 4 5 1

BICYCLE STANDS 1 31 BICYCL E- S T AND 450- 1

125

BICYCLE STANDS

Bicycle-Stand 452 STEEL + STAINLESS STEEL

| 800 mm

Specifications Five U-shaped bent steel tubes with a 42.4 x 2.5 mm diameter, and welded onto two 50 x 6 mm flat bars, each with a length of 3000 mm. Perforations are provided for anchor bolts.

Mounting Screw-on

Finish ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· For details, see catalogue p. 2, price list or online-shop Surface: stainless steel, Design: J.P. Gillen

Bicycle-Stand 452 ST37 steel, galvanised

452.001

ST37 steel, powder coated

452.011

Stainless steel 1.4301

452.002

900

Measurements Length: 3000 mm or on demand Height above ground: 800 mm Wide U-rack: 900 mm Weight: approx. 21 kg

800

Registered design

3000 mm or on demand

126

STEEL

| 860 mm

Specifications U-rack made from perpendicular steel profiles. Other profile dimensions, heights and widths are available upon request at a surcharge. An assembly model is available.

BICYCLE STANDS

Bicycle-Stand 453

Mounting Concrete embedment Option: removable with ground shells Alternative: version with two flanges to enable screwing

Colour: DB 703, version with flanges

Finish ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· For details, see catalogue p. 2, price list or online-shop

Removable model

Concrete embedding/ Removable *

With flanges to enable screwing

ST37 steel, galvanised

453.001

453.240

ST37 steel, powder coated

453.011

453.040

Stainless steel 1.4301

453.002

453.140

106

Ground shell:

306

Cross-section

Ground shells (pair), 400 mm *

458.002

Cover plates for ground shells

458.003

Assembly model

458.004

* For the removable version, two ground shells are needed.

Measurements Width: 820 mm Height above ground: 860 mm Ground insert: approx. 350 mm Weight: approx. 6.5 kg

350

860

820

ABES Online-Shop 24/7: www.abes-online.com

127

BICYCLE STANDS

Bicycle-Stand 454 STEEL

| 200 mm

Specifications Two bent U-shaped frames made from steel tubes and welded onto a steel sheet, opening out frontwards and used to hold a bicycle tyre. Cylindrical bollard can be added with or without 3p-Technology.

Finish ·· Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge

Colour: DB 703

·· For details, see catalogue p. 2-23, price list or online-shop

Note The bicycle stands can also be attached to other cylindrical bollards.

THE ONLY BICYCLE RACK WITH PREDETERMINED BREAKING POINT

ST37 steel Bicycle-Stand 454 | 1 piece (without bollard)

454.001

Bicycle-Stand 454 | 2 pieces (without bollard)

454.002

Bicycle-Stand 454 | 3 pieces (without bollard)

454.003

Bicycle-Stand 454 | 4 pieces (without bollard)

454.004

200

128

Measurements Width: 128 mm Height: 200 mm

128

STEEL + STAINLESS STEEL

| 855 mm

Specifications Frame made from bent steel tubes with a 42.4 x 2.5 mm diameter and parallel tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter

BICYCLE STANDS

Bicycle-Stand 451

Mounting Concrete embedment (only one foundation required)

Note For the removable version, the cover plate is needed.

Removable model

Bicycle-Stand 451

Cover plate (optional)

ST37 steel, galvanised

451.003

455.003

ST37 steel, powder coated

451.013

455.013

Stainless steel 1.4301

451.004

455.004

Cover plate

Ground shell for removable model

Ground shell for removable model: 456.003

Length: 340 mm Width: 290 mm Height above ground: 855 mm Ground insert: approx. 300 mm Weight: approx. 8 kg Cover plate: approx. 1 kg

300

855

Measurements Registered design DM/050906

290

340

129

130

Bettembourg PROJECT

STEEL + STAINLESS STEEL

| 845 mm

Specifications Frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter

BICYCLE STANDS

Bicycle-Stand 450-1

Mounting Concrete embedment (only one foundation required)

Finish ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge Surface: stainless steel, Design: “hammer.runge design“

·· For details, see catalogue p. 2, price list or online-shop

Bicycle-Stand 450-1

Cover plate (optional)

ST37 steel, galvanised

450.001

455.001

ST37 steel, powder coated

450.011

455.011

Stainless steel 1.4301

450.002

455.002

Note For the removable version, the cover plate is needed.

Ground shell for removable model: 456.002

Removable model

Cover plate

Ground shell for removable model

Measurements

300

845

Length: 683 mm Width: 224 mm Height above ground: 845 mm Ground insert: approx. 300 mm Weight: approx. 8 kg Cover plate: approx. 1 kg

Registered design DM/050906

224

683

131

BICYCLE STANDS

Bicycle-Stand 450 + 451 STEEL + STAINLESS STEEL

Diagonal

Circle of 8 bicycle stands

Sample configurations These examples for designing parking areas with the ABES Bicycle-Stands 450 or 451 may serve as inspiration for the variety of configuration options.

Semicircle

Diagonal 180째

Square

Straight row

132

STEEL + STAINLESS STEEL

| 845 mm

Specifications Frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter

BICYCLE STANDS

Bicycle-Stand 450-2

Mounting Concrete embedment (only one foundation required)

Finish ·· Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge Surface: stainless steel, Design: “hammer.runge design“

·· For details, see catalogue p. 2, price list or online-shop

Bicycle-Stand 450-2

Cover plate (optional)

ST37 steel, galvanised

450.003

455.001

ST37 steel, powder coated

450.013

455.011

Stainless steel 1.4301

450.004

455.002

Note For the removable version, the cover plate is needed.

Ground shell for removable model: 456.002

Removable model

Cover plate

Ground shell for removable model

Measurements 1240

300

845

224

Registered design DM/050906

Length: 1240 mm Width: 224 mm Height above ground: 845 mm Ground insert: approx. 300 mm Weight: approx. 10 kg Cover plate: approx. 1 kg

133

134

Luxembourg PROJECT

STEEL + STAINLESS STEEL

| 5 in a row

Specifications Five frames arranged next to each other at a 45° or 90° angle to the base strip. The frames are made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, and mutually offset tube ends; all frames are welded to a convex cover plate with a width of 300 mm. Perforations are provided for anchor bolts.

BICYCLE STANDS

Bicycle-Stand 450-5

Mounting Screw-on

Finish ·· Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge Surface: galvanised, Design: “hammer.runge design“

·· For details, see catalogue p. 2, price list or online-shop Bicycle-Stand 450-5 ST37 steel, galvanised

450.101

ST37 steel, powder coated

450.111

Stainless steel 1.4301

450.102

Measurements Length: 3500 mm | acc. to customer’s needs

Length: 3500 mm | acc. to customer’s needs Registered design DM/050906

Height above ground: 845 mm Fixing: Screws for ground fixation 845

Weight: approx. 53 kg Attached at a 90° angle to the cover plate; can be attached at a 45° angle on request

ABES Online-Shop 24/7: www.abes-online.com

135

PLANTERS Shrubs, small trees and other plants can be planted in the â&#x20AC;&#x153;somewhat different interpretation of a plant potâ&#x20AC;?. They are available in different sizes to meet as many spatial conditions as possible.

TREE GUARDS ABES has developed extremely solid but tasteful barriers and tree guards to protect trees and flower beds. The barriers are available in two versions: one for permanent and one for removable installation. The height of the barriers can be customised so that the objects can adapt to the respective environment.

PL ANT E R 720

139

140

PL A NT E R 7 1 0

TR EE-GUA R D 6 6 2 1 3 8

136

1 4 2 FIRE BASKET 9 3 5

1 39

PL ANT ER 720

137

PLANTERS | TREE GUARDS

TREE GUARD

Tree-Guard 662 STEEL + STAINLESS STEEL

Specifications A bent, U-shaped steel frame with a diameter of 48.3 x 2.6 mm. Three foundations are required. Optional: a ground shell for the removable model

Mounting Concrete embedment or inserted into a standard ground shell (not available with 3p-Technology)

Finish ·· Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge ·· Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703

Surface: stainless steel, Design: J.P. Gillen

·· Other colours available on request at a surcharge ·· For details, see catalogue p. 2, price list or online-shop

Tree-Guard 662 ST37 steel, galvanised

662.001

ST37 steel, powder coated

662.011

Stainless steel 1.4301

662.002

Ground shell for removable model: 600.200

1200

variable 350

Width: 1200 mm Length: 1200 mm Height above ground: on demand Ground insert: approx. 350 mm Weight: approx. 15 kg

1200

Measurements

138

PLANTERS

Planter 720 | 721 720 | STAINLESS STEEL | 700 x 700 mm 721 | STAINLESS STEEL | 700 x 1000 mm Specifications Plant pot with square or oblong basic shape and vertical side walls. Openings are countersunk in the base and closed with a perforated sheet metal cover. The container stands on four individual feet made from square tubes.

Mounting Free standing element

Finish ·· Stainless steel 1.4301 ·· Stainless steel 1.4301 with powder coating in standard RAL colours or DB 703 Colour: DB 703

·· Containers are also available without legs and with welded frames for chain suspension upon request ·· For details, see catalogue p. 2, price list or online-shop

Stainless steel 1.4301 powder coated

Stainless steel 1.4301

720 | 700 mm x 700 mm

720.002

720.003

721 | 700 mm x 1000 mm

721.002

721.003

Measurements 720 Width: 700 mm Length: 700 mm Side wall height: 700 mm Height of container incl. base: approx. 800 mm Weight: approx. 35 kg

Measurements 721 Width: 700 mm Length: 1000 mm Side wall height: 700 mm Height of container incl. base: approx. 800 mm Weight: approx. 45 kg

700 100

700

1000

100

700

139

PLANTERS

Measurements S 1200

691

Width: 691mm (widest point) Length: 1200 mm Height of side wall: 390 mm Height of container, incl. base: 500 mm Volume: approx. 210 L Weight when empty: approx. 65 kg

Measurements M

1500

650

Width: 650 mm (widest point) Length: 1500 mm Height of side wall: 390 mm Height of container, incl. base: 500 mm Volume: approx. 250 L Weight when empty: approx. 68 kg

Measurements L 1800

750

Width: 750 mm (widest point) Length: 1800 mm Height of side wall: 490 mm Height of container, incl. base: 600 mm Volume: approx. 430 L Weight when empty: approx. 85 kg

Measurements XL

140

2000

801

Width: 801 mm (widest point) Length: 2000 mm Height of side wall: 490 mm Height of container, incl. base: 600 mm Volume: approx. 450 L Weight when empty: approx. 87 kg

PLANTERS

Planter 710 STAINLESS STEEL

Specifications Plant pot with curved sides that taper at both ends. The base has apertures which may be sealed with a perforated plate cover. The container stands on rectangular tubes which serve as supports for hoisting equipment. The apertures of the tubes can be covered with removable caps.

Mounting Free standing element Colour: DB 703, Design: Doris Herrmann

Finish ·· Stainless steel 1.4301 ·· Stainless steel 1.4301 with powder coating in standard RAL colours or DB 703 ·· Other colours available on request at a surcharge ·· For details, see catalogue p. 2, price list or online-shop

Stainless steel 1.4301 powder coated

Stainless steel 1.4301

710 | S

710.002

710.003

710 | M

711.002

711.003

710 | L

712.002

712.003

710 | XL

713.002

713.003

110

390 / 490

Colour: DB 703, Design: Doris Herrmann

141

142

Fire-Basket 935 SHEET STEEL

2016

| 50 l

Specifications Fire basket made from non-galvanised sheet steel with three welded feet and capacity of approx. 50 L. Suitable as a simple fireplace or grill for all kinds of occasions. Customised laser cuts at the top, middle and case ensure diverse designs, and make the basket unique. The holes in the upper area may be used for spits. A grate is available as an accessory. Using non-galvanised sheet steel ensures no harmful vapours are formed as heat builds up.

Mounting Free-standing, with three feet

Untreated steel with customised laser cuttings (ABES website and ABES emblem)

Finish ·· Untreated steel ·· Default or customised laser cutting ·· For details, see catalogue p. 2, price list or online-shop

Fire basket 935 Fire-Basket without laser cutting

935.001

Fire-Basket with flame

935.101

Fire-Basket with flame + name

935.201

Fire-Basket with 1 preferred laser cutting

935.301

Fire-Basket with 2 preferred laser cuttings

935.401

Accessories Matching grate

935.002

Soil protection

935.003

ASK ABOUT ADDITIONAL ACCESSORIES CUSTOMISED LASER CUTTINGS POSSIBLE

Measurements Capacity: approx. 50 Liter Diameter: approx. 335 mm Height: approx. 750 mm Weight: approx. 5,0 kg

ABES Online-Shop 24/7: www.abes-online.com

143

Bollard 001 | Planter 720

144

GREVENMACHER | Luxembourg

PROJECT

PRODUCT NAME

PAGE

CATEGORIE

PRODUCT NAME

ACCESSORY

Components of the 3p-Technology

10-19

BOLLARDS

Bollard 025

BENCHES & TABLES

Bench 100

109

Bollard 026

Bench 103

Bollard 027-1 | -2

Bench 104

106

Bollard 028

Bench 107-1 | -2

108

Bollard 029

Bench 121-1 | -2

102

Bollard 031-1 | -2

Bench 131

100

Bollard 032

Bench 141

Bollard 034

Bench 142

Bollard 037-1

Bench 143-1 | -2

Bollard 037-2

Bench 144-1 | -2

Bollard 038

Lean-On-Bench 108

110

Bollard 039

Table 143

Bollard 040

Table 144

Bollard 041

Table 145

Bollard 042-1 | -2

Seating-Bollard 105

111

Bollard 043

Stool 145

Bollard 055-1

Bicycle-Stand 450-1

131

Bollard 055-2

Bicycle-Stand 450-2

133

Bollard 056

Bicycle-Stand 450-5

135

Bollard 057

Bicycle-Stand 451

129

Bollard 058

Bicycle-Stand 452

126

Bollard 060

Bicycle-Stand 453

127

Bollard 061

Bicycle-Stand 454

128

Bollard 062

Bollard 001

Bollard 063

Bollard 001-1

Bollard 064

Bollard 002

Bollard 065

Bollard 003

Bollard 066

Bollard 004

Bollard 068

Bollard 005-1

Bollard-Ashtray 525

87/122

Bollard 005-2

Feeder-Bollard 300-1

Bollard 006-1

Feeder-Bollard 300-2

Bollard 006-2

FIRE BASKET

Fire-Basket 935

142

Bollard 007

LIGHTING BOLLARDS

Lighting-Bollard 200

Bollard 008

Lighting-Bollard 200 LED

Bollard 009-1 | -2

Lighting-Bollard 210 LED

Bollard 010

Lighting-Bollard 220 LED

Bollard 011

Lighting-Bollard 230 LED

Bollard 012

Lighting-Bollard 240 LED

Bollard 013

PLANTERS

Planter 710

140

Bollard 014-1 | -2 | -3

Planter 720 | 721

139

Bollard 015

TREE GUARD

Tree-Guard 662

138

Bollard 016

WASTE CONTAINERS

Waste-Container 515

123

Bollard 017

Waste-Container 523

118

Bollard 018

Waste-Container 524

119

Bollard 019

Waste-Container 527

115

Bollard 020

Waste-Container 529

117

Bollard 021-1 | -2

Waste-Container 530

117

Bollard 022

Waste-Container 531

115

Bollard 023

Waste-Container 532

120

Bollard 024

Waste-Container 533

121

BICYCLE STANDS

BOLLARDS

PAGE

PRODUCT OVERVIEW

CATEGORIE

145

REFERENCES 146

Projects | SELECTION GERMANY AND LUXEMBOURG PLACE

PROJECT

PRODUCTS

LAST

City of Bayreuth

Metrop. area, Opernstraße, marketplace a. o.

Bollards, bicycle stands

2016

City of Saarbrücken

Metropolitan area (since 2004) a. o.

Bollards

2016

City of Cologne

Metropolitan area (since 2007)

Bollards, lighting bollards

2015

City of Gelsenkirchen

Horster Straße, urban redevelopmen

Bollards

2015

City of Regensburg

Metrop. area, Zuckerfabrik, Football-Stadium (Arena Regensburg)

Bollards

City of Bitburg

Metropolitan area, Poststraße

Bollards

2015

City of Würzburg

Metropolitan area

Lighting bollards

2015

City of Dillingen

Lokschuppen

Bollards

2015

Fraport

Airport

Bollards, bicycle stands

2015

City of Hamburg

Metropolitan area, Nikolaiquartier, Airport, Überseering, Gänsemarkt a. o.

Bollards, bicycle stands

City of Lübeck

Metropolitan area, Hanseschule, Untertrave

Bollards

2014

City of Berlin

Metropolitan area

Bollards, bicycle stands

2014

City of Göttingen

Metrop. area, university, senior citizens‘ residential home

Bollards

City of Munich

Metrop. area, Messe Riem, Balanstr., Schwere-Reiter-Str., Hirschgarten a. o.

Bollards, bicycle stands, lighting bollards

City of Oberhausen

Metropolitan area, u. a. Bebelstraße

Bollards

2014

City of Dortmund

Hörde (urban redevelopment)

Bollards

2013

City of Stuttgart

Metropolitan area and outskirts

Bollards

2013

Sylt

Hörnum, Rantum, Westerland a. o.

Bollards, bicycle stands, benches

2012

Ville de Luxembourg

Kirchberg, Metropolitan area

Bollards, bicycle stands

2015

Belval

Metropolitan area

Bollards

2015

Commune de Kayl

Town area

Bollards with logo, feeder bollards, waste containers

2015

Commune de Dudelange

Metropolitan area, Église Saint-Martin

Bollards

2015

Ville d‘Esch-sur-Alzette

Metropolitan area, Fonds Belval, Rockhal

Bollards, bicycle stands, tree guard

2014

Commune de Mersch

Town area

Bollards, feeder bollards, benches

2014

Commune de Pétange

Town area

Bollards, bicycle stands, waste containers

2014

Comm. de Sandweiler

Town area

Bollards, lighting bollards, waste containers

2014

Cactus S. A.

Belle Etoile, Echternach, Mersch, Kayl, Redange, Remich, Windhof a. o.

Bollards, bicycle stands

2015

2014 2014

2013

REFERENCES

SALES THROUGH RESELLERS EUROPE COUNTRY

PROJECT

PRODUCTS

SINCE

Belgium

Deinze a. o.

Bollards

2002

Denmark

Different cities

Bollards, bicycle stands

2004

Finland

Helsinki a. o.

Bollards, bicycle stands, benches

2005

France

Biarritz, Bouchain, Bretignolles-sur-Mer, Castillon la Bataille, Charleville-Mézières, Côte d’Azur, Dôle, Lyon, Metz, Nicolas les Arras, Pons, Sedan, Soteville-leRouen, St.-Nicolas-les-Arras, Toulouse, Hôpital Sud de Lyon, Saint Michel de Maurienne, Fretin a. o.

Complete product range

Great Britain

London, Manchester a. o.

Bollards, benches

2005

Italy

Various cities in South Tyrol

Bollards, bicycle stands

2006

Netherlands

Different cities

Bollards, bicycle stands, waste containers

2002

Austria

Amstetten, Bruck/Mur, Krems, Salzburg, Wien, Wolfsberg a. o.

Complete product range

Portugal

Lissabon a. o.

Complete product range

Switzerland

Amriswil, Chur, La Chaux-de-Fonds, Laufenburg, Maienfeld, Neuchâtel, Nyon, Simplon, Solothurn, Unterägeri, Wattwil, Zürich, Commune Epalinges a. o.

Complete product range

Different cities

Bicycle stands, benches

2010

COUNTRY

PROJECT

PRODUCTS

SINCE

Australia

Bunbury, Darwin, Ellenbrook, Leighton Beach, Perth, Port Hedland, Scarborough

Complete product range

Hong Kong

Metropolitan area

Bollards

2008

New Zealand

Auckland a. o.

Bollards, lighting bollards und benches

2007

Singapore

Metropolitan area

Bollards und benches

2009

USA

Washington D. C., L‘Enfant Plaza

Bollards und bicycle stands

2015

U. A. E.

Al Bustan

Benches und waste containers

2010

Spain

2004

2003 2008 2006

WORLDWIDE

ASK FOR REFERENCES IN YOUR AREA!

2005

Further references can be found on: http://abes-online.com/en/projects/

147

Projects | SELECTION

A U S TR A LI EN

LU X EM B U R G | K I R C HB ER G

ESCH | BE LVAL

L U X E M BUR G | ROT ONDE

M A N C HES TER

148

S Y LT

GREVENMACHER

ST E I NF OR T

LU X EM B U R G | R O TO N D E

S A N D W EI LER

S Y LT

S AARBRÜCKEN

149

INNOVATIO

in STEEL

ADVANTAGES AT A GLANCE ASSEMBLY & STORAGE

HWS-mobil THE MOBILE FLOOD-PREVENTION SYSTEM Fierce storms and heavy rain are becoming increasingly common, resulting in millions of euros of material damage. It is to be feared that climate change will cause more and more extreme weather events. HWS-mobil is a mobile flood-prevention system developed in co-operation with the Water Management and Environmental Research Institute (fwu) at the University of Siegen. Working in an opposite way to a barrage, the baffle plates curve “away from the water” and are exposed to pressure by the rising flood waters. As sheet steel absorbs tractive forces very well, the protective walls, which are “just” 1 millimetres thick, provide reliable protection for damming heights of more than one metre.

·· Quick assembly/disassembly using a single tool ·· Only two people required for setup ·· Easy to use (no component weighs more than 20 kg) ·· Reusable and long-lasting due to hot-dip galvanising ·· Compact for storage

USAGE ·· Very durable due to steel components ·· Very good density; only two seals per field ·· Effective protection against vandalism ·· Personalised solutions possible

AREAS OF APPLICATION ·· Building projection: Protection of doors, gates and driveways ·· Linear protection of company premises and private complexes

MAJOR CHARACTERISTICS OF HWS-MOBIL:  Lightweight = easy to transport without the need of lifting devices

·· Linear protection in the event of dyke raising

COMPATIBILITY WITH ABES PRODUCTS

 Minimum amount of seals  Property protection  Linear protection  Interchangeable with ABES products

150

Thanks to 3p-Technology, the ground shells can be used to mount benches, waste containers and other pieces of furniture, while not looking like eyesores during flood-free times.

Implementation of HWS-mobil SOLID | LIGHTWEIGHT | SECURE

Protection of an underground car park

KC O M P A T I B EL EL

HWS-mobil HWS - mobile is compatible with all ABES 3p technology products

Protection of a private house

HWS-mobil INDIVIDUAL PARTS Permanently embedded parts

Temporarily fitted parts

Optional

Ground shell

Wall module

Slide-in module

Wall connection profile

Support module

Baffle plate

Support protection

MORE INFORMATION CAN BE FOUND IN THE INSTALLATION INSTRUCTIONS, WHICH WE WILL GLADLY SEND YOU FREE OF CHARGE, OR VISIT www.howatec-online.com

151

152

PERTH | Australia PROJECT

All presentations and descriptions in the brochure, as well as the product models and properties, including the 3p-Technology, are given for information purposes only. Due to the unpredictability of daily usage, no guarantee can be given for the described product properties. All products have been carefully developed for a tough everyday use and are built accordingly robust. We reserve the right to make technical or optical amendments without prior notice at any given time or when we believe this serves the further development and improvement of our products. “ABES” and “3p-Technology” are registered word and figurative trade marks. Catalogue design: Doris Schäfer Photography: Kai Funk, Sebastian Gross, Guy Wolff and ABES Printed: March 2016

www.abes-online.com

e .c

A BE S

ABES S. à r. l. 48, rue Gabriel Lippmann L-6947 Niederanven Fon: +352 . 28 67 65 01 Fax: +352 . 28 67 65 20 E-Mail: mail@abes-online.com

24/7

IN ON L E - S

a b e s - o nlin