HP LaserJet Enterprise 700 shading MFP M775 Installation Setup Guide

HP LaserJet Enterprise 700 shading MFP M775 Installation Setup Guide getssupporthere.blogspot.com/2019/09/hp-laserjet-enterprise-700-shading-mfp.html HP LaserJet Enterprise 700 shading MFP M775 Installation Setup Guide

How to set up the physical pieces of the printer. Complete these means before you introduce the printer programming on your PC. On the off chance that you have officially set up the printer equipment and you need programming establishment help, see the Links to programming establishment directions segment toward the part of the bargain.

This record incorporates the accompanying strides to set up the printer Unload the printer Select a site to put the printer that meets the accompanying particulars: A durable work surface, well-ventilated zone, and away from direct daylight Temperature run: 15° – 30° C (59° – 86° F) Mugginess run: 10% – 80% Alert: The printer weighs 116.3 kg (256.5 lb.). HP prescribes that four individuals move the printer.

Remove the HP printer from the case, and after that evacuate the bundling material. Confirm that the substance coordinate this delineation.

NOTE 1/6

HP suggests reusing pressing materials at whatever point conceivable.

Figure : Contents of the container Expel the orange transportation tape and froth defender.

Figure : Remove the delivery tape and froth defender Open the archive feeder, and after that evacuate the froth defenders and staying orange delivery tape.

Figure : Remove the froth defenders and remaining transportation tape Open Tray 2, and afterward evacuate the plate transportation lock.

Figure : Remove the plate delivery lock from Tray 2 Close Tray 2.

Figure : Close Tray 2 Open Tray 3 and Tray 4, and after that evacuate the orange delivery tape and cardboard supplements.

Alert Ensure that the lock switch (behind Tray 3) on the paper taking care of extra is in the bolted position.

Figure : Remove the transportation tape and cardboard additions from Tray 3 and Tray 4 Close Tray 3 and Tray 4.

Figure : Close Tray 3 and Tray 4 Ensure that the lock switch on the paper taking care of frill is in the bolted position.

Figure : Check the lock switch on the paper taking care of frill Burden paper Open Tray 2.

Figure : Open Tray 2 Change the sliding front and side paper advisers for the right paper size.

Figure : Adjust the paper guides Spot the paper in the plate.

Figure : Load paper in the plate Try not to over-burden the plate. Ensure that the heap of paper fits inside the plate and is no higher than the highest point of the aides.

Figure : Check paper stack stature guides Close the plate.

Figure : Close the plate 2/6

Interface the system link (discretionary) On the off chance that you are associating with a system, interface the system link now. If not, skirt this progression and go to the Connect the power link and turn on the printer area in this archive.

Alert Try not to associate a USB link now. In the event that you intend to utilize a USB link to associate the printer to the PC, it will be associated during the product establishment.

Figure : Connect the system link Interface the telephone link for fax (discretionary) To utilize the fax work, interface the provided telephone link between the fax port on the printer and a telephone jack.

NOTE A connector for the RJ11 telephone link may be required to interface with the telephone jack.

Figure : Connect the telephone link for fax Interface the power link and turn on the printer Interface the power link between the printer and a grounded AC outlet. To avert harm to the printer, utilize just the power link that is furnished with the printer.

Figure : Connect the power link Alert Ensure your capacity source is sufficient for the printer voltage rating. The voltage rating is on the printer mark. The printer utilizes either 100-127 Vac or 220-240 Vac and 50/60 Hz. Turn the printer control on.

Figure : Press the power catch Hang tight for 60 seconds before proceeding. During this time, in the event that you associated the printer to a system, the system perceives the printer and appoints an IP address or host name for the printer.

On the control board, set the language, the date/time position, and the time zone. At the point when the Home screen shows up, contact Initial Setup, and empower fundamental printer capacities.

For cutting edge arrangement for system associated printers, enter the printer IP address in the location bar of a Web program after programming establishment is finished. To discover the IP address, do one of the accompanying: NOTE The means to discover the printer IP address change contingent upon the control-board type. Allude to the table in stage 5 to decide your control-board type.

FutureSmart 3: On the printer control board, contact the Network FutureSmart 4:On the printer control board, contact the Information symbol, and after that touch the Network 3/6

In the event that the printer will be associated with a USB link, the product establishment procedure necessitates that the printer is turned on and in the Ready state. Design the accompanying setting so the printer wakes from Sleep mode during the product establishment process: NOTE The means fluctuate as indicated by the sort of control board.

From the Home screen on the printer control board, look to and contact the Administration Select the General Settings Contact the Energy Settings/3. Contact the Wake/Auto On to These Events/4. Contact the All occasions FutureSmart 4 Of course, printers with FutureSmart 4 will wake from Sleep during the product establishment process.

Check that the printer capacities To confirm that the printer capacities, pursue the means underneath.

NOTE The means shift as indicated by the control board.

FutureSmart 3 To check that your printer prints, do the accompanying: From the Home screen on the printer control board, look to and contact the Administration Open the accompanying menus: Reports Arrangement/Status Pages/3. Contact the Configuration Page thing to choose it.

NOTE In the event that you intend to utilize the printer on a system, spare these pages. The Jetdirect page contains the printer IP address.

In the event that you associated the printer to a system, discover the IP address on the Jetdirect page.

IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you should physically arrange the IP address. Something else, the system setup was fruitful.

IPv6: If the IP address starts with "fe80:",the printer ought to have the option to print. If not, you should physically arrange the IP address.

Figure : Jetdirect page To test the archive feeder and the duplicate capacity, do the accompanying: Spot the printed setup page face-up in the report feeder.

From the Home screen on the printer control board, contact the Start The item duplicates, and after that prints a page.

4/6

To test the scanner glass and the duplicate capacity, do the accompanying: Spot the printed design page face-down on the scanner glass.

From the Home screen on the printer control board, contact the Start The item outputs, and after that prints a page.

FutureSmart 4 To check that the printer prints, do the accompanying: From the Home screen on the printer control board, look to and select Reports.

Select Configuration/Status Pages. /3. Select Configuration Page. /4. Select Printto print the setup and Jetdirect pages.

On the off chance that the printer is associated with a system, discover the IP address on the Jetdirect page.

IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, physically arrange the IP address.

Something else, the system setup was effective.

IPv6: If the IP address starts with "fe80:", the printer ought to have the option to print. If not, physically design the IP address.

Figure : Jetdirect page To test the archive feeder and the duplicate capacity, do the accompanying: Spot the printed design page face-up in the archive feeder.

From the Home screen on the printer control board, contact Start. The item duplicates, and after that prints a page.

To test the scanner glass and the duplicate capacity, do the accompanying: Spot the printed arrangement page face-down on the scanner glass.

From the Home screen on the printer control board, contact Start. The item duplicates, and afterward prints a page.

Update the firmware (discretionary yet suggested) HP consistently updates includes that are accessible in the printer firmware. Update the printer firmware to exploit the most current highlights.

NOTE: Check with your system executive before refreshing the printer firmware.

Snap here for data on refreshing the printer firmware utilizing a USB glimmer drive or the Embedded Web Server (EWS).

Connections to programming establishment directions After you complete the past arrangement steps, you can introduce the printer programming utilizing the printer CD or by downloading the product from the HP Web website.

Alert: 5/6

Try not to associate a USB link now. In the event that you intend to utilize a USB link to associate the printer to the PC, it will be associated during the product establishment.

6/6