Cable Support Systems
Our Story
5S Systems is a Company specialising in the supply of Cable Support Systems products for the electrical distribution, infrastructure, mining, rail and transport markets. Manufactured under strict quality assurance systems, products conform to standards with high quality.
Directors of the Company, Bhupendra Rana (Managing Director) and Mrinal Saikia (Director Sales), offer a 30 plus years of combined experience in the cable support systems industry. With Office and Warehouse centrally located in Sydney, 5S Systems is strategically located to efficiently service Sydney Metropolitan area and also to other NSW and ACT markets.
We have strong Manufacturing and Engineering capability of our products and we offer customised Support Brackets/ Frames, etc to suit specific project requirements.
We will work with you to deliver smart and innovative solutions on your projects, with efficient timely deliveries to meet project deadlines.
Your business…Our Commitment.
Mrinal Saikia Director - Sales Bhupendra Rana Managing DirectorNema
Covers
Ladder Shape Covers
Channel Joiners
Cantilever Bracket
Beam Clamp / Purlin Clip
Flat Plate Fittings
Angle Fittings
Angle and “U” Fittings
Fittings
D5 Series 2 Piece Pipe Clamp
Contents 33 34 36 35 37 38 39 40 41 42 43 Miscellaneous FR50 Nema Cable Ladder FR40 Nema Cable Ladder FR100 Nema Cable Ladder (50+50 kgs) FR70 Nema Cable Ladder (35+35 kgs) FR20 DT3 Cable Tray 150 | 300 FR20 DT3 Cable Tray 450 | 600 FR35 Double Stack DT3 Cable Tray Custom Fabrication Custom Fabrication Pipe Support Seismic Solutions DT3 Tray DT5 Tray Perforated Cable Tray Cable Duct Cable Mesh Nema 1 Cable Ladder Nema 2 Cable Ladder Nema 3 Cable Ladder Nema 4 (20C) Cable Ladder Nema Ladder Shapes: N1, N2, N3 and N4 (N20C)
Ladder Accessories: N1,
N2, N3 and N4 (N20C)
Combination Channels
Channels
Channel Accessories
U Bolts Rod Hangers Nylon Range Fasteners Channel Nuts 4 5 6 7 8/9 10 11 12 13 14 15 16 17 18 19 20 20 21 23 22 23/24 24 25 26 31 27/29 32 30/31 33
Fasteners
P RODUCT INFORMATION
Pre-Galvanised to AS1397
Hot Dip Galvanised to AS/NZS4680; ISO1461
Length: 3 Metres
Height: 50mm
LOAD & DEFLECTION DATA
Working load is inclusive of 1.5 safety factor
Page 4
DT3 TRAY ACCESSORIES
Allowable Load (kg/m)
Ordering code Overall width (mm) DT3150 172 DT3300 322 DT3450 472 DT3600 622 DT3TX Tee/Cross Bracket DT3RP Radius Plate SBH: Splice Bolt CNH:
Nut DT3S Splice Plate DT3HD Hold Down Bracket DT3RL Riser Link Deflection 7mm Deflection 9mm Deflection 14mm 0 10 20 30 40 50 60 70 80 90 100 1.5m span 2m span 3m span
DT3 Tray
Splice
LOADING DATA
P RODUCT INFORMATION
Pre-Galvanised to AS1397
Hot Dip Galvanised to AS/NZS4680; ISO1461
Length: 3 Metres
Height: 85mm
Note: Deflections are only a guide based on continuous spans.
Page 5
DT5 TRAY ACCESSORIES
Deflection 1mm Deflection
Deflection
0 20 40 60 80 100 120 140
Allowable Load (kg/m)
3mm
5mm
DT5 Tray
DT5TX Tee/Cross Bracket
DT5RP Radius Plate
SBH: Splice Bolt
CNH: Splice Nut
DT5S Splice Plate
DT5HD Hold Down Bracket
DT5RL Riser Link
Ordering code Overall width (mm) DT5150 172 DT5300 322 DT5450 472 DT5600 622
Perforated Cable Tray
P RODUCT INFORMATION
Pre-Galvanised to AS1397
Hot Dip Galvanised to AS/NZS4680; ISO1461
Length: 2.44 Metres
Height: 15mm
Heavy Duty Perforated Cable Trays
* Height: 50mm – made to order
* Height: 75mm – made to order
Note: Heavy Duty Perforated Cable Trays are made to order
Page 6
Ordering code Overall width (mm) DTP75 75 DTP100 100 DTP150 150 DTP225 225 DTP300 300 DTP450 450 DTP600 600 Ordering code Overall width (mm) DTP7575 75 DTP10075 100 DTP15075 150 DTP22575 225 DTP30075 300 DTP45075 450 DTP60075 600
Ordering code Overall width (mm) DTP7550 75 DTP10050 100 DTP15050 150 DTP22550 225 DTP30050 300 DTP45050 450 DTP60050 600
Cable Duct
P RODUCT INFORMATION
Length: 2.44m (Standard)
Finish: Pre-Galvanised; Hot Dip Galvanized (HDG) - AS4680/ISO1461
Stainless Steel 316 (SS316); Aluminum (AL)
Accessory Radius: 70mm (Other radius’ available upon request)
All pieces come complete with cover, cover fixings and splice fixings
CABLE DUCT ACCESSORIES
Duct Bend: DCB
Duct External Riser: DCER
Duct Internal Riser: DCIR
Duct Tee: DCT
Duct Cross: DCC
Duct End Cap: DEC
Page 7
Ordering code Width (mm) Height (mm) DSL5050 50 50 DSL7575 75 75 DSL100100 100 100 DSL150100 150 100 DSL250150 250 150 DSL450150 450 150 DSL600150 600 150
*150mm high sided Cable Mesh also available.
Cable Mesh
P RODUCT INFORMATION
Cable Mesh products have been tested in accordance with Nema Standards VE1-2009. Loading applies to 600mm section and loading may vary for other widths.
Page 8
Ordering code Cable laying width (mm) Finish DM100_ 100 PG = Pre-Galvanised DM150_ 150 H = Hot Dip Galvanised DM200_ 200 S = Stainless Steel 316 Grade DM300_ 300 PC = Powder Coated (colour) DM400_ 400 DM450_ 450 DM500_ 500 DM600_ 600 Ordering code Cable laying width (mm) Finish DM100100_ 100 PG = Pre-Galvanised DM150100_ 150 H = Hot Dip Galvanised DM200100_ 200 S = Stainless Steel 316 Grade DM300100_ 300 PC = Powder Coated (colour) DM400100_ 400 DM450100_ 450 DM500100_ 500 DM600100_ 600
Cable Mesh
Load in kg/m per support centres (mm)
Clip Quick Hold Down
Trapeze
Page 9
Size 1500mm 1750mm 2000mm 2250mm 2500mm DM600 115 84.75 64.84 52.25 41.5
DMTB41 DMTB21
DMS Side Joiner
DMKIT1
DMSP Splice Plate
DMSB Bolt Joiner
TRCC Fasteners
DMCEPG Cable Exit
DMU20 & DMU30 Brackets
DM UFA Hanger
Spider Bracket
DMELU Bendable Coupler BCUT Offset Jaw Bolt Wire Cutter
DMU4008 & DMU4010 Hold Down
DWC Batman
Brackets
Nema 1 Cable Ladder
P RODUCT INFORMATION
Cable Laying Depth: 43mm
Rung Spacing: 300mm nominal
Length: 3m (Standard); 6m
Standard Style: Rail Out
Finish: Hot Dip Galvanised (HDG) AS4680/ISO1461
Stainless Steel 316 (SS316)
Loading Data: 112kg/Lm on 3.7m span (SF = 1.5)
Tested to NEMA VE1 Specification 2009
Accessory Radius: 300mm (Standard); 450mm; 600mm
Finish: “H” for Hot Dip Galvanised “S” for Stainless Steel
Allowable loads are determined generally in accordance with NEMA VE1 Specification 2009 and verified by testing. Safety Factor = 1.5 on collapse load for single span.
Deflections shown apply to end-bays (ie. worst case) of a continuous ladder run. To find deflection of a single span, multiply by 2.5.
Page 10
Ordering code (3 mtrs) Cable laying width (mm) N1L150_ 150 N1L300_ 300 N1L450_ 450 N1L600_ 600 N1L900_ 900 Ordering code (6 mtrs) Cable laying width (mm) N1L1506_ 150 N1L3006_ 300 N1L4506_ 450 N1L6006_ 600 N1L9006_ 900
13 43 16 W 65
Nema 2 Cable Ladder
P RODUCT INFORMATION
Cable Laying Depth: 65mm
Rung Spacing: 300mm nominal
Length: 6m (Standard); 3m
Style: Rail Out (Standard); Rail In
Finish: Hot Dip Galvanised (HDG) AS4680/ ISO1461; Stainless Steel 316 (SS316)
Loading Data: 149kg/Lm on 3.7m span (SF = 1.5)
Tested to NEMA VE1 Specification 2009
Accessory Radius: 450mm (Standard); 300mm; 600mm; 900mm; 1200mm
Finish: “H” for Hot Dip Galvanised “S” for Stainless Steel
Allowable loads are determined generally in accordance with NEMA VE1 Specification 2009 and verified by testing. Safety Factor = 1.5 on collapse load for single span.
Deflections shown apply to end-bays (ie. worst case) of a continuous ladder run. To find deflection of a single span, multiply by 2.5.
Page 11
DEFLECTION
Ordering code (3 mtrs) Cable laying width (mm) N2L1503_ 150 N2L3003_ 300 N2L4503_ 450 N2L6003_ 600 N2L9003_ 900 Ordering code (6 mtrs) Cable laying width (mm) N2L150_ 150 N2L300_ 300 N2L450_ 450 N2L600_ 600 N2L900_ 900
ALLOWABLE LOAD GRAPH
GRAPH
25 65 24 W 93
Nema 3 Cable Ladder
P RODUCT INFORMATION
Cable Laying Depth: 102mm
Rung Spacing: 300mm nominal
Length: 6m (Standard); 3m
Style: Rail Out (Standard); Rail In
Finish: Hot Dip Galvanised (HDG) AS4680/ISO1461; Stainless Steel 316 (SS316)
Loading Data: 112kg/lm on 6m span
Tested to NEMA VE1 Specification 2009
Accessory Radius: 450mm (Standard); 300mm; 600mm; 900mm; 1200mm
Allowable loads are determined generally in accordance with NEMA VE1 Specification 2009 and verified by testing. Safety Factor = 1.5 on collapse load for single span.
Deflections shown apply to end-bays (ie. worst case) of a continuous ladder run. To find deflection of a single span, multiply by 2.5.
Page 12
ALLOWABLE LOAD GRAPH DEFLECTION GRAPH Ordering code (3 mtrs) Cable laying width (mm) N3L1503_ 150 N3L3003_ 300 N3L4503_ 450 N3L6003_ 600 N3L9003_ 900 Ordering code (6 mtrs) Cable laying width (mm) N3L150_ 150 N3L300_ 300 N3L450_ 450 N3L600_ 600 N3L900_ 900 Finish: “H”
Galvanised “S”
for Hot Dip
for Stainless Steel
32 102 24 W 130
Nema 4 (20C) Cable Ladder
P RODUCT INFORMATION
Cable Laying Depth: 118mm
Rung Spacing: 300mm nominal
Length: 6m (Standard); 3m
Style: Rail Out (Standard); Rail In
Finish: Hot Dip Galvanised (HDG) AS4680/ ISO1461; Stainless Steel 316 (SS316)
Loading Data: 149kg/Lm on 6m span (SF = 1.5)
Tested to NEMA VE1 Specification 2009
Accessory Radius: 450mm (Standard); 300mm; 600mm; 900mm; 1200mm
Allowable loads are determined generally in accordance with NEMA VE1 Specification 2009 and verified by testing. Safety Factor = 1.5 on collapse load for single span.
Deflections shown apply to end-bays (ie. worst case) of a continuous ladder run. To find deflection of a single span, multiply by 2.5.
Page 13
ALLOWABLE LOAD GRAPH DEFLECTION GRAPH Ordering code (3 mtrs) Cable laying width (mm) N4L1503_ 150 N4L3003_ 300 N4L4503_ 450 N4L6003_ 600 N4L9003_ 900 Ordering code (6 mtrs) Cable laying width (mm) N4L150_ 150 N4L300_ 300 N4L450_ 450 N4L600_ 600 N4L900_ 900
Finish: “H” for Hot Dip Galvanised “S” for Stainless Steel 32 118 24 W 146
Nema Ladder Shapes – N1, N2, N3 and N4 (20C)
ORDERING CODE GUIDE:
RHR
Page 14
Ladder type Shape type Width (mm) Radius “R” Finish N1 = Nema 1 B = Bend 90° 150 3 = 300mm (standard) H = Hot Dip Galvanised N2 = Nema 2 ER = External Riser 90° 300 4 = 450mm S = Stainless Steel 316 grade N3 = Nema 3 IR = Internal Riser 90° 450 9 = 900mm A = Aluminium N4 = Nema 4 T = Tee 600 12 = 1200mm PC__ = Powder Coated C = Cross 900
= Straight Reducer
= Left Hand Reducer
SR
LHR
= Right Hand Reducer Nema Bend Nema External Riser Nema Internal Riser Nema Tee Nema Right Hand Reducer Nema Left Hand Reducer Nema Straight Reducer Nema Cross
Nema Ladder Accessories – N1, N2, N3 and N4 (20C)
Fasteners are sold separately
Splice Plate: N1 Splice Plate: N2, 3 & 4 (20C)
Splice Plate: N2, 3 & 4 (20C)
Inverted Rail
Nema 1 Splice Plate = 2 x Hex Screw M8 x 20mm
Nema 2 Splice Plate 4 sets of Splice Bolts + Splice Nuts
Nema 3 Splice Plate 8 sets of Splice Bolts + Splice Nuts
Nema 4 Splice Plate 8 sets of Splice Bolts + Splice Nuts
Vertical Splice Plate Horizontal Splice Plate
Nema 1 Vertical and Horizontal Splice Plate = 2 Hex Screw M8 x 20mm
Nema 2 Vertical and Horizontal Splice Plate = 4 sets of Splice Bolts + Splice Nuts
Nema 3 Vertical and Horizontal Splice Plate = 8 sets of Splice Bolts + Splice Nuts
Nema 4 Vertical and Horizontal Splice Plate = 8 sets of Splice Bolts + Splice Nuts
Hold Down Unit: N1
Hold Down Unit: N2, 3 & N4 (20C)
Nema Ladder Divider Strip
Comes with M8 x 30mm
Hex Head Set Screws and Channel Nut M8 with Spring. Hold Down Brackets are also sold separately.
ORDERING CODE GUIDE:
Ladder type Shape type
Supplied together with suitable Hex Head Set Screws and Channel Nuts. Hold Down Brackets are also sold separately.
N1 = Nema 1 S = Splice Plate
N2 = Nema 2 VS = Vertical Splice
N3 = Nema 3 HS = Horizontal Splice
N4 = Nema 4 HDU = Hold Down Unit
DS = Divider Strip
Finish
Length: 3m
3 sets of fixing (D3016H Channel Nut M6 and PS625MG Pan Screw M6 x 25mm) recommended per length. Fasteners are sold separately.
H = Hot Dip Galvanised
S = Stainless Steel 316 grade
A = Aluminium
PC__ = Powder Coated
Page 15
Covers
P RODUCT INFORMATION
Length: 3m; 2.44m
Style: Flat, 15º Peak (standard); 5º
Peak, 30º Peak
Thickness: 1.0 mm; 1.2 mm
(Other thicknesses available upon request)
Flat Covers
Finish:
• Pre-Galvanised, Hot Dip Galvanized (HDG) - AS4680/ISO1461
• Stainless Steel 316 Grade
• Aluminium
• Powder Coated colours
(Available upon request)
ORDERING CODE GUIDE:
Page 16
Item Cover Style Tray/Ladder Type Width (mm) Finish C = Cover F = Flat DT = Perforated Tray 150 G = Pre-Galvanised P = Peaked N1DT3 = Nema 1, DT3, Cable Mesh 300 H = Hot Dip Galvanised PV = Peaked and Vented N2 = Nema 2 450 S = Stainless Steel 316 grade N3 = Nema 3 and Nema 4 600 A = Aluminium 900 PC__ = Powder Coated
W
Peaked Covers Peaked and Vented Covers
W W 15 5 15 5
Ladder Shape Covers
ORDERING CODE GUIDE:
Page 17
Ladder type Shape type Width (mm) Radius (mm) Finish C = Cover B = Bend 150 3 = 300 G = Pre-Galvanised ER = External Riser 300 4 = 450 H = Hot Dip Galvanised IR = Internal Riser 450 6 = 600 S = Stainless Steel 316 grade T = Tee 600 9 = 900 A = Aluminium C = Cross 900 PC__ = Powder Coated LHR = Left Hand Reducer RHR = Right Hand Reducer SR = Straight Reducer Bend Cover Left Hand Reduce Cover External Riser Cover Right Hand Reduce Cover Internal Riser Cover Straight Reduce Cover Tee Cover Cross Cover
Pre-Galvanised to AS1397
Hot Dip Galvanised to AS/NZS4680; ISO1461
Channels
P RODUCT INFORMATION
Stainless Steel 316 Grade Standard length: 6 Metres
Thickness: 2.5mm
D1000 Plain Channel
Weight: 2.65kgs/mtr
D1000 Slotted Channel
Weight: 2.32kgs/mtr
D3300 Plain Channel
Weight: 1.88kgs/mtr
D3300 Slotted Channel
Weight: 1.55kgs/mtr
D5500 Plain Channel
Weight: 3.43kgs/mtr
Page 18
41 T 41 41 T 41 41 T 62 T 22 41 T 22 41
Channels
Pre-Galvanised to AS1397 Hot
AS/NZS4680; ISO1461
Combination Channels
Stainless Steel 316 Grade
Standard length: 6 Metres
Thickness: 2.5mm
D1001 Plain Channel
Weight: 5.22kgs/mtr
D3301 Plain Channel
Weight: 3.76kgs/mtr
Page 19
P RODUCT INFORMATION
Dip Galvanised to
Combination Channels are made to order 41 44 T
D1001A
D1001B
D1001C
D1001C41
41 82 T
Plastic Closure Grey 3mtrs
D1184GY
Plastic End Cap 41 x 41 White
D1180W
Channel Accessories
Plastic Closure White 3mtrs
D1184W
Plastic End Cap 41 x 61
D5580
Plastic End Cap 41 x 41 Grey
D1180GY
Plastic End Cap 41 x 21
D3380
Channel Joiners
Page 20
D922J EXT 41 x 41
D922T
D922L D922X
Cantilever Bracket
CB2: Without Brace CB4: With Brace CB254: Cantilever with Back to Back Channel
ORDERING CODE GUIDE:
Stainless Steel 316 grade
D1075-8 Cantilever (long arm)
Finish: Hot Dip Galvanized (HDG) AS4680/ISO1461
Stainless Steel 316 (SS316)
Powder Coated Colours
** Custom sizes including extra long Cantilevers also available on request
Page 21
Item Width (mm) Finish
with
H =
CB2 = Cantilever Bracket w/o Brace 150 (only
CB2)
Hot Dip Galvanised
S
CB254 = Cantilever
w/back to back Channel 450 600 750 900 1200
CB4 = Cantilever Bracket w/Brace 300
=
Bracket
Page 22 Beam Clamp / Purlin Clip
D1271
D1272
D2785
DBC12
DPC8
DPC10
DPC12
D2750
D2786
D3087
DBC10
D1386
D1796
Flat Plate Fittings
Fittings
Page 23
D1941 D1358 D1031 D1036 D1026
D1325
D1062 = to suit M8 D1063 = to suit M10 D1064 = to suit M12 Square Washer 41 x 41 D1065 D1066 D1067 D1028
D1068 D1326
D1458 D2484 D1037 D1038 Angle
Page 24
Angle Fittings
D4045
D1045
D1347
D4047
D1047
D5547
D2224
D2228
D2346
D1376
D1377
D1044
D1033
D1357
D1359
Angle and “U” Fittings
Fittings
Page 25
D2072
D2072A
D2073
D1186
D1546
D2815
D2452
D2855
D5 Series 2 piece Pipe Clamp
Finish:
Z = Zinc Plated
H = Hot Dip Galvanized
S = Stainless 316
Page 26
Code Cable Diameter (mm) D5-8 8 D5-11 11 D5-14 14 D5-17 17 D5-19 19 D5-21 21 D5-25 25 D5-27 27 D5-29 29 D5-32 32 D5-34 34 D5-38 38 D5-43 43 D5-48 48 D5-51 51 D5-54 54 D5-57 57 D5-60 60 D5-64 64 D5-67 67 D5-70 70 D5-73 73 D5-76 76 D5-79 79 D5-83 83 Code Cable Diameter (mm) D5-86 86 D5-89 89 D5-92 92 D5-95 95 D5-98 98 D5-102 102 D5-105 105 D5-108 108 D5-111 111 D5-114 114 D5-117 117 D5-121 121 D5-127 127 D5-133 133 D5-140 140 D5-146 146 D5-152 152 D5-160 160 D5-165 165 D5-171 171 D5-178 178 D5-191 191 D5-203 203 D5-216 216 D5-230 230
Fasteners
Hex Screw Part #
M6 x 20mm HS620
M6 x 25mm HS625
M6 x 30mm HS630
M8 x 20mm HS820
M8 x 25mm HS825
M8 x 30mm HS830
M10 x 20mm HS1020
Hex Screw Part #
M10 x 25mm HS1025
M10 x 30mm HS1030
M10 x 40mm HS1040
M12 x 25mm HS1225
M12 x 30mm HS1230
M12 x 40mm HS1240
Self Drilling Screw Gauge 14 (2.0mm)
14 Gauge 10 TPI X 25mm
Self Drilling Screw Gauge 10 (3.2mm)
10 Gauge 16 TPI X 16mm
10 Gauge 16 TPI X 20mm
#
10 Gauge 16 TPI X 25mm SDS1016X25
Self Drilling Screw Gauge 12 (2.6mm)
# 12 Gauge 14 TPI X 20mm
12 Gauge 14 TPI X 25mm
Self Drilling Screw Gauge 8 (4.1mm)
8 Gauge 12 TPI X 16mm
#
8 Gauge 12 TPI X 20mm SDS812X20
8 Gauge 12 TPI X 25mm
Page 27
SDS1410X22
Part # 14 Gauge 10 TPI X 22mm
SDS1410X25
Part
SDS1214X20
SDS1214X25
Part
SDS1016X16
SDS1016X20
Part
SDS812X16
SDS812X25
**supplied in 1 mtr & 3mtrs long length
Page 28 Threaded Rod Thread Size Part # M6 TR6_ M8 TR8_ M10 TR10_ M12 TR12_ Rod Cutter Cutter Size Part # M10 TRC10 M12 TRC12
Hex Nut with Nylon Insert Thread Size Part # M6 M8 M10 M12 NHN6 NHN8 NHN10 NHN12 Hex Nut Thread Size Part # M6 M8 M10 M12 HN6 HN8 HN10 HN12 Wing Nut Thread Size Part # M6 M8 M10 M12 WN6 WN8 WN10 WN12 Rod Coupler Thread Size Part # M6 M8 M10 M12 RC6 RC8 RC10 RC12 Dynabolt Size Part # M6 x 35 M8 x 40 M10 x 40 M12 x 50 DB635 DB840 DB1040 DB1250 Drop in Anchor Size Part # M6 x 25 M8 x 30 M10 x 40 M12 x 50 DI625Z DI830Z DI1040Z DI1250Z
Fasteners
Fasteners
Pan Head Machine Screw
Size & Length Part #
M6 X 16mm PS616
M6 x 20mm PS620
M6 x 25mm PS625
M6 x 30mm PS630
M8 x 20mm PS820
M8 x 25mm PS825
M8 x 30mm PS830
Countersunk Head Machine Screw
Size & Length Part #
6 x 10mm CS610
6 x 12mm CS612
6 x 16mm CS616
6 x 20mm CS620
6 x 25mm CS625
6 x 30mm CS630
Security Screw
BP510S: M5 X 10 G304 Button Post Torx Metal Thread (Driver: T25)
Page 29
Flat Washer Thread Size Part # M6 FW6_ M8 FW8_ M10 FW10_ M12 FW12_ Spring Washer Thread Size Part # M6 SW6_ M8 SW8_ M10 SW10_ M12 SW12_ Mudguard Washer Thread Size Part # M6 MW6_ M8 MW8_ M10 MW10_ M12 MW12_
Metric Round U Bolt Kit
Mild Steel (incl 2 Nuts) Hot Dip Galvanised
Metric Square U Bolt Kit
Mild Steel (incl 2 Nuts) Hot Dip Galvanised
Page 30
U Bolts
Part A Nominal Bore W L T Pack D14-21 M10 15 21 65 40 50 D14 - 27 M10 20 27 77 50 50 D14 - 34 M10 25 34 85 50 50 D14 - 43 M10 32 43 93 50 50 D14 - 48 M10 40 48 100 50 50 D14 - 51 M10 40 51 103 50 50 D14 - 60 M10 50 60 110 50 50 D14 - 76 M12 65 76 127 50 25 D14 - 89 M12 80 89 140 50 25 D14 - 102 M12 90 102 152 50 25 D14 - 115 M12 100 115 165 50 10 D14 - 140 M12 125 140 190 50 10 D14 - 165 M12 150 165 215 50 10 D14 - 168 M12 150 168 220 50 10 D14 - 219 M16 200 219 295 75 10 D14 - 273 M20 250 273 370 100 5 D14 - 324 M20 300 324 420 100 1 D14 - 356 M20 350 356 455 100 1 D14 - 406 M20 400 406 505 100 1 D14 - 457 M24 450 457 555 100 1 D14 - 508 M24 500 508 605 100 1 D14 - 610 M24 600 610 710 100 1
Part A W L T D14SQ42-86 M10 42 86 55 D14SQ42-127 M10 42 127 55 A = Thread Size W = Width L = Effective Length T = Thread Length
U Bolts
Metric Round U Bolt Kit Mild Steel (incl 2 Nuts) Hot Dip Galvanised
Rod Hangers
DHRH10
Side Hanger (Steel)
Socket Drivers
Page 31
Part A L Y T EB38234H 3/8” 2” 3/4” 1 1/2” EB38334H 3/8” 3” 3/4” 1 1/2” EB38434H 3/8” 4” 3/4” 1 1/2” EB38634H 3/8” 6” 3/4” 1 1/2” EB38834H 3/8” 8” 3/4” 2 1/4” EB1381234H 3/8” 12” 3/4” 3” EB12334H 1/2” 3” 3/4” 2 1/2” EB12434H 1/2” 4” 3/4” 2 1/2” EB12534H 1/2” 5” 3/4” 2 1/2” EB12634H 1/2” 6” 3/4” 2 1/2” EB12834H 1/2” 8” 3/4” 2 1/2” EB12934H 1/2” 9” 3/4” 2 1/2” EB5841H 5/8” 4” 1” 2 1/2”
W
T
A = Thread Size
= Width L = Effective Length
= Thread Length
DCRH10 Central Hanger
Horizontal Hanger
Concrete Steel Timber DVRH10 Vertical Hanger
Vertical Hanger (Concrete) Vertical Hanger (Steel) Vertical Hanger (Timber)
Threaded TR6N TR8N TR10N TR12N
in 1mtr length Other thread sizes available
Nylon Range Fasteners
M6 M8 M10 M12
NHN6 NHN8 NHN10 NHN12
M6 M8 M10
NHN6 NHN8 NHN10
NHS620
NHS630
NHS820
NHS825
NHS830
NHS1020
NHS1025
NHS1030
NHS1040
NHS1230
Page 32 Flat Washer ID OD Part # 6.4 8.4 10.5 13.0 12.9 16.0 20.0 24.0 NW6 NW8 NW10 NW12 Top Hat (Bush) Hex Set Screw ID OD Part # Size (mm) Part # 6.0 8.4 10.5 13.0 9.0 16.0 20.0 24.0 TR6N TR8N TR10N TR12N M6 x 20 M6 x 30 M8 x 20 M8 x 25 M8 x 30 M10 x 20 M10 x 25 M10 x 30 M10 x 40 M12 x 30 M12 x 40
NHS1240 Rod Hex Nut Wing Nut Thread Size Part # Thread Size Part # Thread Size Part # M6 M8 M10 M12
Comes
Channel Nuts
Finish: Z = Zinc H = Hot Dip Galvanised S = Stainless Steel
Miscellaneous
Touch up Spray Can
Colour Shade Part #
Pearl White X15 Orange
APO Grey
Blaze Blue
Flame Red Black
TouchupPCW
TouchupX15O
TouchupAPO
TouchupBB
TouchupFR
TouchupBlk
Galvanised Spray Can Heavy Duty Safety Bolt (Seismic Certified)
Page 33
Thread Size Part # M6 D1006_ M8 D1007_ M10 D1008_ M12 D1010_ Butterfly Nut Thread Size Part # M6 D3016_
Thread Size Part # M6 D4006_ M8 D4007_ M10 D4008_ M12 D4010_
Thread Size
M6 D3006_ M8 D3007_ M10 D3008_ M12 D3010_
Channel Nut Long Spring
Channel Nut Short Spring
Channel Nut without Spring
Part #
•
FR50 Nema Cable Ladder
P RODUCT INFORMATION
5S Systems Nema 2 Fire Rated Cable Ladder has been tested and certified according to AS3013:2005 which has a 2-hour rating @ 1050º Celsius
AS/NZS 3013:2005 Classification: WS5X
This rating applies to:
Ladder with Widths = 150, 300, 450 & 600mm
Support span = 1.3m
Load bearing capacity = 50Kg/M
Specifications:
Hot Dip Galvanised to AS/NZS4680; ISO 1461
Length: 6 meters / 3 meters
Height: 93mm
Cable Laying Depth: 50mm
Side Rail: Rail in
•
Page 34
Item Cable Laying Width K = Kit Finish FR50L 150 ** A kit includes:
Trapeze Bracket
•
Hold Down Bracket Kit
Splice Kit
Hex Nut
Flat Washer H = Hot Dip Galvanised 300 PC__ = Powder Coated __”name of colour”__ 450 600 Item Ordering Code Nema 2 Fire Rated Ladder 150mm Kit FR50L150K Nema 2 Fire Rated Ladder 300mm Kit FR50L300K Nema 2 Fire Rated Ladder 450mm Kit FR50L450K Nema 2 Fire Rated Ladder 600mm Kit FR50L600K
•
•
FR40 Nema Cable Ladder
P RODUCT INFORMATION
5S Systems Nema 2 Fire Rated Cable Ladder has been tested and certified according to AS3013:2005 which has a 2-hour rating @ 1050º Celsius
This rating applies to:
Ladder with Widths = 150, 300, 450 & 600mm
Support span = 1.5m
Load bearing capacity = 40Kg/M
Specifications:
Hot Dip Galvanised to AS/NZS4680; ISO 1461
Length: 6 meters / 3 meters
Height: 93mm
Cable Laying Depth: 50mm
Side Rail: Rail in
•
•
•
Page 35
Item Cable Laying Width K = Kit Finish FR40L 150 ** A kit includes:
Trapeze Bracket
•
Hold Down Bracket Kit
Splice Kit
Hex Nut
Flat Washer H = Hot Dip Galvanised 300 PC__ = Powder Coated __”name of colour”__ 450 600 Item Ordering Code Nema 2 Fire Rated Ladder 150mm Kit FR40L150K Nema 2 Fire Rated Ladder 300mm Kit FR40L300K Nema 2 Fire Rated Ladder 450mm Kit FR40L450K Nema 2 Fire Rated Ladder 600mm Kit FR40L600K
•
FR100 Nema Cable Ladder
50+50 kgs
P RODUCT INFORMATION
5S Systems Nema 2 Fire Rated Cable Ladder has been tested and certified according to AS3013:2005 which has a 2-hour rating @ 1050º Celsius
AS/NZS 3013:2005 Classification: WS5X
This rating applies to: Ladder with Widths = 150, 300, 450 & 600mm
Support span = 1.3m
Load bearing capacity = 100Kg/M
Top tier: 50kg/M | Bottom tier: 50kg/M
Specifications: Hot Dip Galvanised to AS/NZS4680; ISO 1461
Length: 6 meters / 3 meters
Height: 93mm
Cable Laying Depth: 50mm
Side Rail: Rail in
Ordering Code
Nema
Nema 2 Fire Rated Double Stack Ladder 300mm Kit
Nema 2 Fire Rated Double Stack Ladder 450mm Kit
Nema
•
•
•
•
•
H
PC__ = Powder Coated __”name of colour”__
Page 36
Item Cable Laying Width K = Kit Finish FR100LD 150 300 450 600 ** A kit includes:
Trapeze Bracket
Hold Down Bracket Kit
Splice Kit
Hex Nut
Flat Washer
= Hot Dip Galvanised
Item
2 Fire Rated Double Stack Ladder 150mm Kit FR100LD150K
FR100LD300K
FR100LD450K
2 Fire Rated Double Stack Ladder 600mm Kit FR100LD600K
FR70 Nema Cable Ladder
35+35 kgs
P RODUCT INFORMATION
5S Systems Nema 2 Fire Rated Cable Ladder has been tested and certified according to AS3013:2005 which has a 2-hour rating @ 1050º Celsius
AS/NZS 3013:2005 Classification: WS5X
This rating applies to:
Ladder with Widths = 150, 300, 450 & 600mm
Support span = 1.5m
Load bearing capacity = 70Kg/M
Top tier: 35kg/M | Bottom tier: 35kg/M
Specifications: Hot Dip Galvanised to AS/NZS4680; ISO 1461
Length: 6 meters / 3 meters
Height: 93mm
Cable Laying Depth: 50mm
Side Rail: Rail in
•
•
•
•
•
PC__ = Powder Coated __”name of colour”__
Page 37
Item Cable Laying Width K = Kit Finish FR70LD 150 300 450 600 ** A kit includes:
Trapeze Bracket
Hold Down Bracket Kit
Splice Kit
Hex Nut
Flat Washer
Dip Galvanised
H = Hot
Item
Ordering Code
Double Stack Ladder 150mm Kit FR70LD150K
Nema 2 Fire Rated
Stack
Kit FR70LD300K
Fire Rated
Kit FR70LD450K
Nema 2 Fire Rated Double
Ladder 300mm
Nema 2
Double Stack Ladder 450mm
Fire Rated
Stack Ladder 600mm Kit FR70LD600K
Nema 2
Double
FR20T
P RODUCT INFORMATION
5S Systems Nema 2 Fire Rated Cable Tray has been tested and certified according to AS3013:2005 which has a 2-hour rating @ 1050º Celsius
AS/NZS 3013:2005 Classification: WS5X
This rating applies to:
Tray with Widths = 150 & 300mm
Support span = 1.2m
Load bearing capacity = 20Kg/M
Specifications:
Pre-Galvanised to AS1397
Hot Dip Galvanised to AS/NZS4680; ISO 1461
Length: 3 meters
Height: 50mm
Cable Laying Depth: 45mm
•
•
•
•
•
H =
PC__ = Powder Coated
Page 38
Item Cable Laying Width K = Kit Finish
150 300 ** A kit includes:
Trapeze Bracket
Hold Down Bracket Kit
Splice Kit
Hex Nut
Flat Washer
Hot Dip Galvanised
Item Ordering Code DT3 Fire Rated Tray 150mm Kit FR20T150K DT3 Fire Rated Tray 300mm Kit FR20T300K
__”name of colour”__
FR20 DT3 Cable Tray 150 | 300
FR20 DT3 Cable Tray
P RODUCT INFORMATION
5S Systems Nema 2 Fire Rated Cable Tray has been tested and certified according to AS3013:2005 which has a 2-hour rating @ 1050º Celsius
AS/NZS 3013:2005 Classification: WS5X
This rating applies to:
Tray with Widths = 450 & 600mm
Support span = 1m
Load bearing capacity = 20Kg/M
Specifications:
Pre-Galvanised to AS1397
Hot Dip Galvanised to AS/NZS4680; ISO 1461
Length: 3 meters
Height: 50mm
Cable Laying Depth: 45mm
FR20T
•
•
•
•
•
H =
PC__
Page 39
Item Cable Laying Width K = Kit Finish
450 600 ** A kit includes:
Trapeze Bracket
Hold Down Bracket Kit
Splice Kit
Hex Nut
Flat Washer
Hot Dip Galvanised
= Powder Coated
Item Ordering Code DT3 Fire Rated Tray 450mm Kit FR20T450K DT3 Fire Rated Tray 600mm Kit FR20T600K
__”name of colour”__
450 | 600
FR35 Double Stack DT3 Cable Tray
P RODUCT INFORMATION
5S Systems Nema 2 Fire Rated Cable Tray has been tested and certified according to AS3013:2005 which has a 2-hour rating @ 1050º Celsius
AS/NZS 3013:2005 Classification: WS5X
This rating applies to:
Tray with Widths = 150, 300, 450 & 600mm
Support span = 1m
Load bearing capacity = 35Kg/M total
Top tier: 20kg/M | Bottom tier: 15kg/M
Specifications:
Pre-Galvanised to AS1397
Hot Dip Galvanised to AS/NZS4680; ISO 1461
Length: 3 meters
Height: 50mm
Cable Laying Depth: 45mm
•
•
•
•
•
H
PC__ = Powder Coated __”name of colour”__
Page 40
Item Cable Laying Width K = Kit Finish FR35TD 150 300 450 600 ** A kit includes:
Trapeze Bracket
Hold Down Bracket Kit
Splice Kit
Hex Nut
Flat Washer
= Hot Dip Galvanised
Item Ordering Code
Fire Rated Tray 150mm Kit
Fire Rated Tray 300mm Kit
Fire Rated Tray 450mm Kit
Fire Rated Tray 600mm Kit
DT3
FR35TD150K DT3
FR35TD300K DT3
FR35TD450K DT3
FR35TD600K
Custom Fabrication
5S Systems specialise in manufacturing products to suit customer’s needs as per design. Be it Flat Plate design or made out of various Channels or a total mixture, we are able to fabricate and supply to construction site requirements.
** Please contact your 5S Systems Representative for more information.
Page 41
Custom Fabrication - Pipe Support
Made to Contractor’s design to suit Construction Site installations
5S Systems specialise in manufacturing Pipe Support products to suit customer’s needs as per design. Be it small size or big diameter pipe/ structures, we are able to fabricate and supply to Construction Sites.
** Please contact your 5S Systems Representative for more information.
Page 42
Custom Fabrication - Seismic Solutions
5S Systems Seismic Bracings offer solution to brace and secure building services, improving the resilience and safety of buildings in the event of an earthquake. Reference to the following industry standards for testing, seismic design and seismic codes of practice: AS 1170.4: 2007 (R18) Structural Design Actions – Earthquake actions in Australia.
Seismic restraint is the attachment of components to building structure to resist primarily horizontal forces in an earthquake.
Our team can assist you with:
• Seismic consulting & design
• Bill of material and estimation
• Certification
** Please contact your 5S Systems Representative for more information.
Page 43
Your business...Our commitment Catalogue edition 3: March 2022 Disclaimer: This catalogue, designs, data and specifications therein are the property of 5S Systems Pty Ltd and must not be used, reproduced or copied, wholly or part, without the written permission of 5S Systems. 5S Systems reserves the right to change designs and dimensions within the catalogue without prior notice. 5S Systems Pty. Ltd. 1 Mary Street, Melrose Park NSW 2114 Email: admin@5ssystems.com.au Website: www.5ssystems.com.au Scan the QR code from your smart phone camera to save contact information. Bhupendra Rana Mrinal Saikia Seemanto Nath