SER
Contents
INTRODUCTION
Machine completion and equipment
Machine completion
Brakes and controls
T railer brake hydraulic control
Hydraulic systems
Front hitch cylinders and lines
Hydraulic travel system
Hitches, drawbars, and implement couplings
[37.100] Drawbars and towing hitches
Frames and ballasting
Frame
Ballasts and supports
Wheels
[44.530] Carrying and transport wheels
Electrical systems
Hydraulic system control
External lighting
Metering system
[61.901] Metering mechanical drive
Soil preparation/Finishing
components
Seeding
[77.100] Product handling and delivery drive system
[77.105] Seeding tool
[90.1 18] Protections and footboards .
10/09/2015
Safety rules
Basic instructions
Basic instructions
Special tools
General specification
Dimension
General specification
Conversion factors
Product identification
Part identification
BAIL14SE00801AA 1
SEM19101776 2
SAFETY FEA TURES FOUND THE MACHINE
Support stands: provide safe support the front part the machine when performing maintenance and
Safety chains: avoid lack control over machine case accidental disengagement between the bar the Seeder and the drawbar the tractor .
Decals: there are decals with warnings about the jor safety risks and with technical instructions such metering
Platforms (footrests) and protections: they should not used during machine operation; only for filling and
BAIL14SE00824AA 3
Row lift cylinder locks: provide safety against the ering the planting rows when transporting the chine and performing When you start disconnect these
BAIL14SE00801AC 4
BAIL14SE00824AC 5
BAIL14SE00824AB 6
W ARNING NOTES USED THIS MANUAL
NOTE: This word indicates special technical instructions not can cause malfunction and eventually , damage the
A TTENTION: This word indicates special technical instructions not can cause damage the machine and even risk injury
A TTENTION: This word indicates special technical instructions not can cause damage the chine and imminent risk injury , and even
Displacement transportation the machine
cases where the machine needs moved another location perform maintenance observe rules such as:
• Prefer the use trucks transport the especially when comes public For transporting the machine towing with the tractor:
• Seek information about what allowed and the order recommended the local traf fic
• For operations performed default the current the consequences must borne the operator When displacement with the tractor allowed:
• Use alerting devices, such flags, slow vehicle emblems, lights, etc., approved the current local traf fic laws. Keep these devices clean and good
• Practice speeds compatible with the road conditions and traf but never exceeding MPH (20 / Reduce the speed considerably when the surface
NOTE: not transport the machine loaded: supply the seed the planting
• Use the brake pedals the tractor for a smooth
• careful with the power crossing points restricted width and other
• Never allow people the machine while moving
For maintenance services performed with the Seeder coupled onto the tractor .
For many maintenance especially those performed the convenient leave the Seeder coupled the tractor ensure the firmness and stability the addition:
• Remove the ignition key
• Engage the first gear and actuate the parking
• Put a sign next the tractor panel:
When removing, reinstalling moving heavy assemblies
• Always use appropriate devices attach and lift whole and / heavy
• Never stand under suspended safe the lifting equipment may be, not worth running the risk!
• Check that the devices used have the necessary pacity and that they are perfect storage and ing
BAIL14SE00801BA 8
Safety recommendations follow when performing maintenance the Seeder
NOTE: The following recommendations are specific the maintenance work the Seeder , the workshop the
For safety information related the handling chemical fertilizers and see the
• Keep the machine properly supported: Always lower both support stands and install the locking latches the lift See the item features found the machine", and not support the machine improvised objects which can collapse under the load. also not work the machine supported only a hydraulic
• equipped with row not forget lower was necessary leave them ensure a complete locking.
• Especially , when handling parts that have a cutting edge, such the lagged and coulter disks, use priate
SEM19101778 9
• With the engine running: not touch enter the seed fertilizer box and not perform any repairs and also not access the supply
• not wear loose clothing, blankets loose hair (if jewelery such bracelets and necklaces: moving parts could pull and tear such with a risk serious injury!
• Understand the procedure before performing fer this manual when necessary
• Prolonged exposure loud noise can cause hearing damage. Use ear protectors such as: noise dampers and
• Operating the equipment safely requires your full A void using headphones while operating the
• Use original parts only Similar apart from promising the functioning the also pose safety hazards.
• Use appropriate tools and not accept provisations and refer this manual whenever sary . Improvisations constitute a potential safety Special precautions should taken when using trical T o loosen and tighten use the correct size and pattern (millimetric) tools.
• W ork dry , clean and ventilated
• Whenever possible and necessary , clean the chine before performing maintenance: the operation becomes safer , with better quality Remove accumulations grease, oil and debris, which apart from hindering they represent potential sources fire
• Remove all tools and unused parts before starting the same way , analyze the work performed and remove parts protections allow easier making this work safer , more productive and with ity
• not perform repairs areas with transmission (chains and gears) when the machine running; risk mutilation!
SEM19101779
SEM19101760 1 1
BAIL14SE00801AG
SEM19101784
• Close all safety devices before starting the This will prevent other materials from getting tangled shafts and other moving parts the
• Keep away from the articulated parts the such row
• not walk the ladders platform the machine when the tractor
T ire calibration:
• Never exceed the recommended pressure seat the edges the tire the rim.
• Replace the tire presents any Replace the rim you observe any sign cracks, wear , deformation severe
• Make sure all the air was removed prior removing the tire from the
• Make sure the tire properly seated the rim during its filling.
• T ire replacement can dangerous and must performed trained personnel with proper tools and
• Never stand front top during the mounting a
• When removing and installing use suitable dling equipment for the weight involved. available, use a safety cage perform this type
SEM19101786
SEM19101761
Care taken with hydraulic systems and fluids under pressure general
• Fluids escaping under pressure can penetrate the skin, causing injury and serious poisoning; fluids injected into the skin must surgically removed soon they may cause
• T o check for use a piece paper not body parts.
• accident see a doctor immediately
• W ear protective gloves and goggles when working with hydraulic
A void fires
• Keep a fire extinguisher and a first aid kit always hand also Keep emergency numbers for doctor , ambulance, hospital and firefighter near the
• Never allow open flame welding near flammable solvents and other!
• not smoke the work There always the risk fire due the wide range flammable
• When remove any flammable products from near the area welded, such fuels, solvents
Chemicals and the Environment
• Being exposed come into contact with chemical decals and can harmful your
• Protect yourself from the waste gases chemical products derived from the treatment
A TTENTION: See a doctor immediately you notice symptoms poisoning such abdominal profuse chest blurred vision and nonreactive T ake the container , the label the suspected chemical Manufacturers these products provide a phone number for contact any time
BAIL14SE00801AH
BAIL14SE00801AJ
• Before disposing used fluids and always remember the environment: not pour spill these products the ground water , place them tainers that could cause
• Dispose paints and other products equately , established the existing environmental legislation. Many these products may fer recycling
BAIL14SE00801BC
Conditions the workplace
• the workshop: separate and organize used and discarded parts; the first opportunity , take them collection points for All materials, including tires, currently have recycling alternatives.
• not allow the floor the workshop get drenched with oil; this cause for slipping and apart from compromising the appearance the Remember: organization the mirror quality for the professional who works
• Provide the necessary illumination the work necessary , use a portable safety light for working places hard reach and / with lack good light.
Regarding the portable aware the insulating conditions both the electric power cable and the lamp itself: the heat the cables not properly insulated poor quality and accidentally broken bulb are factors that may cause burns a
W
elding work
• Use the proper PPE for this activity: mask, gloves and a leather
• case electric welding: always seek connect the negative electrode near the point
• Only perform welding well ventilated areas avoid the concentration toxic gases and dust.
• Before remove the thus preventing the formation toxic gases and dust. you cannot remove the use appropriate mask protect against the inhalation toxic When sanding surfaces, especially with paint, also wear a
you use a solvent remove the not forget wash the area with soap and water before welding: fire hazard!
SEM19101776
Basic instructions
HITCH THE MACHINE ONT O THE TRACT CAUTION
T ransport hazard!
Always connect a safety chain between the machine and the implement. Only use a safety chain with a strength rating equal greater than the gross weight the implement.
Failure comply could result minor moderate injury .
CAUTION
A void injury!
Handle all parts carefully not place your hands fingers between Use Personal Protective Equipment (PPE) indicated this manual, including protective goggles, gloves, and safety footwear
Failure comply could result minor moderate injury .
DANGER
Crushing hazard! not stand place any body part between the implement and a moving tractor . Stop the tractor engine and set the parking brake before you attach cables and hoses. Failure comply will result death serious injury
Engage the drawbar the tractor and leveling
The drawbar (1) engaged the tractor through the bar (2) , and the lower lift
The machine leveling set and maintained the height adjusted the lower lift arms the tractor . The correct machine leveling during planting critical the performance and maintaining the correct depth seed and fertilizer
The machine leveling (A) correct when the sides the frame and the drawbar (1) are flat (parallel) the
BAIL14SE00810A V 1
BAIL14SE00810A W 2
Safety chain
The chain (3) has the main function safety case accidental disengagement the Engage the chain end (2) the top link the hitch
The current (3) can act descent limiting the lift and therefore the drawbar (1)
NOTE: *By the choice the links connected the chain end
3
4
Hydraulic coupling
After engaging the bar (2) the lower lift arms, attach the hoses (4) the Seeder the remote quick
NOTICE:
• Before coupling the seeder hydraulic cylinder clean the surface the quick coupler
• When not using the quick coupler , keep the plastic cap
• not couple onto the hydraulic draulic systems containing impurities its since apart from contaminating the hydraulic can cause damage its components.
5
BAIL14SE00810AU
BAIL14SE00810BE
BAIL14SE00810AX
HYDRAULIC SYSTEM
Through the triple control valve (5) assembled the machine and the joystick type electric control attached the tractor , possible select the desired hydraulic function:
• I / down the transport drive
• lift row units (free passage oil, circuit without solenoid
• III moves the drawbar the machine between the transport and operation
NOTE: After using the control (6) position III", turn the control lever the center This will vent the heating the control valve coil (6)
Disengage the machine the tractor
With the control lever (6) the central position "II", raise the row units with remote control.
Install locks (7) the row
6
Release pressure the hydraulic circuit: the remote control has the use for this there "Floating", shut down engine and move the remote control lever for both sides until the stroke
Remove the hoses (4) .
Lower and lock the support
Disengage drawbar (2) the lower lift arms the tractor
BAIL14SE00810AZ
BAIL14SE0081 1AA 7
NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it. Have any questions please