New Holland E30C Mini Excavator Service Repair Manual by Repair manual download

SER VICE MANUAL E30C Cab - TIER 4 final engine E30C Canopy - TIER 4 final engine 48175000 02/10/2017

Hydraulic

Contents INTRODUCTION Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [10.001] Engine and crankcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1 [10.102] Pan and covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2 [10.106] V alve drive and gears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3 [10.101] Cylinder heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4 [10.105] Connecting rods and pistons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.5 Crankshaft and flywheel Fuel tanks Fuel filters [10.220] Throttle linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.9 [10.218] Fuel injection system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.10 [10.202] Air cleaners and lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1 1 Intake and exhaust manifolds and muf fler [10.400] Engine cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.13 [10.414] Fan and drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.14 [10.304] Engine lubrication system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.15 Hydraulic systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic systems Reservoir , cooler , and filters V ariable displacement pump Main control valve [35.357] Pilot system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.5 [35.355] Hydraulic hand control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.6 Hydraulic foot control

swing system

travel system 48175000 02/10/2017

Boom hydraulic system

Dipper hydraulic system

Excavator and backhoe bucket hydraulic system

T ool quick coupler hydraulic system

Hammer and rotating bucket hydraulic system [35.739]

Frames and ballasting

Swing ring assembly

Ballasts and supports

T rack frame and driving wheels

T racks

T rack tension units

T rack rollers

Electrical systems

Electrical system

Harnesses and connectors

Cab engine controls

Engine starting system

Alternator

Battery

Cold start aid

Fuel tank system

Engine intake and exhaust system

Engine cooling system

Engine oil system

Hydraulic central joint

Swing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.16

Dozer blade cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.17

arm hydraulic system

[35.741]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

racks

suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

and track

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 48175000 02/10/2017

Cab controls

Cab controls (Lift Dipper , Bucket)

Wiper and washer system

External lighting

External

[55.514] Cab lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.17 [55.408] W arning indicators, alarms, and instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.18 Booms, dippers, and buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [84.1 14] Boom pivoting support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.1 [84.910] Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.2 [84.912] Dipper arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.3 [84.100] Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.4 Dozer blade and arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10] Dozer blade Platform, cab, bodywork, and decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [90.150] Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90.1 [90.160] Cab interior trim and panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90.2 [90.1 18] Protections and footboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90.3 operator seat Engine hood and panels Machine shields and guards 48175000 02/10/2017

lighting switches and relays

INTRODUCTION 48175000 02/10/2017 1

Hydraulic contamination

General specification

Consumables

Consumables - Engine oil recommended operating temperature range

Product identification

Product identification - Machine orientation

Contents INTRODUCTION Foreword - Important notice regarding equipment servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety rules - General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety rules - Personal safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety rules - Ecology and the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 T orque - Standard torque settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T orque - Special torque settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic instructions - Shop and assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conversion factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

eights

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48175000 02/10/2017 2

Foreword - Important notice regarding equipment servicing

All repair and maintenance work listed this manual must carried out only qualified dealership strictly complying with the instructions and whenever the special

Anyone who performs repair and maintenance operations without complying with the procedures provided herein shall responsible for any subsequent

The manufacturer and all the organizations its distribution chain, including - without limitationnational, regional, local reject any responsibility for damages caused parts and / components not approved the facturer , including those used for the servicing repair the product manufactured marketed the manufacturer any case, warranty given attributed the product manufactured marketed the manufacturer case damages caused parts and / components not approved the manufacturer

The manufacturer reserves the right make improvements design and changes specifications any time without notice and without incurring any obligation install them units previously and illustrative material herein are accurate known time publication but are subject change without notice. case refer your NEW HOLLAND CONSTRUCTION Sales and Service

INTRODUCTION

48175000 02/10/2017 3

Safety rules

Personal safety

This the safety alert used alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury

Throughout this manual you will find the signal words W and CAUTION followed special These precautions are intended for the personal safety you and those working with

Read and understand all the safety messages this manual before you operate service the

DANGER indicates a hazardous situation not will result death serious injury

W ARNING indicates a hazardous situation not could result death serious injury

CAUTION indicates a hazardous situation not could result minor moderate injury

F AILURE T O FOLLOW DANGER, W ARNING, AND CAUTION MESSAGES COULD RESUL T DEA SERIOUS INJUR Y .

Machine safety

NOTICE: Notice indicates a situation that, not avoided, could result machine property damage.

Throughout this manual you will find the signal word Notice followed special instructions prevent machine property damage. The word Notice used address practices not related personal safety .

Information

NOTE: Note indicates additional information that clarifies other information this

Throughout this manual you will find the word Note followed additional information about a step, other information the The word Note not intended address personal safety property

INTRODUCTION

48175000 02/10/2017 4

Safety rules - General information

Cleaning

Clean the metal parts with cleaning solution that meets the standard and steam (except for bearings)

After cleaning, dry well, and inject oil all parts.

Also inject oil into the bearings after

Inspection

When disassembling check all the

there are any worn damaged replace

Inspect carefully prevent initial

Bearing

Replace any loose

Air dry bearings before installing

Needle bearing

When inserting needle very careful not damage

Apply grease the section where the needle bearing will

Gear

Check that there wear and Oil seal, Oring, gasket

Always install new oil O - and

Apply grease sections where oil seals and O - rings will

Shaft

Check that there wear and

Check the bearings and check for damaged oil seals the shaft.

Service parts

Install NEW HOLLAND CONSTRUCTION genuine service parts.

When placing order , check the parts contains the NEW HOLLAND CONSTRUCTION genuine part numbers.

Any

the

INTRODUCTION

breakdowns

the oil from the

specified the manual service

breakdowns arising from any fuel hydraulic oil other than those specified are not covered the warranty 48175000 02/10/2017 5

arising from

installation non

genuine parts are not covered the warranty Lubricants (fuel, hydraulic oil) Use

specified company

Any

Safety rules - Personal safety

INTRODUCTION

Preliminary warnings maintenance operation

ARNING A void injury! Shut off the engine, remove the key , and make sure all machine motion stops before you service the machine. Failure comply could result death serious injury 128B

ARNING Improper operation service this machine can result accident. Assign a supervisor direct worksite Agree all safety and suitable hand signals. Failure comply could result death serious injury . W0287A CAUTION Pinch hazard! Always use suitable tools align mating parts. NOT use your hand fingers. Failure comply could result minor moderate injury C0044A Personal Protective Equipment (PPE) W ARNING A void injury! Use Personal Protective Equipment (PPE), including protective goggles, gloves, and safety footwear . Failure comply could result death serious injury . W1036A Lifting operation

ARNING Crushing hazard! The lifting systems must operated qualified personnel who are aware the correct procedures follow . Make sure all lifting equipment good condition, and all hooks are equipped with safety latches. Failure comply could result death serious injury W0256A

ARNING Heavy objects! Lift and handle all heavy components using lifting equipment with adequate capacity Always support units parts with suitable slings hooks. Make sure the work area clear all bystanders. Failure comply could result death serious injury W0398A

ARNING Improper operation service this machine can result accident. Raised equipment machine movement without operator can cause serious injury . Always the following before performing any maintenance: Park the machine flat, level ground. Lower the attachment the Shut down the engine and remove the ignition key . Lock the tracks. Failure comply could result death serious injury W0944D 48175000 02/10/2017 6

W ARNING

W ARNING Burn

Before performing any service the hydraulic system, you must allow cool. Hydraulic fluid temperature should not exceed (104 °F).

W ARNING Pressurized

W ARNING

Before attempting any service procedure, your responsibility know the number accumulators the and the correct procedure for releasing the pressure each accumulator

W ARNING

Battery acid causes burns. Batteries contain sulfuric acid.

A void contact with skin, eyes clothing. Antidote (external): Flush with water . Antidote (eyes): flush with water for minutes and seek medical attention immediately . Antidote (internal): Drink large quantities water milk. not induce vomiting. Seek medical attention immediately .

W ARNING Battery

Fluids

W ARNING

Hazardous chemicals!

Coolant can toxic. A void contact with skin, eyes, and clothing. Antidotes: EXTERNAL - Rinse thoroughly with water . Remove soiled clothing. INTERNAL - Rinse the mouth with water NOT induce Seek immediate medical EYES - Flush with water . Seek immediate medical attention. Failure

INTRODUCTION

the

Failure comply could result death

W0276A

system

T - over hazard! Only raise

track little necessary

serious injury

Hydraulic

hazard!

Failure comply could result

W0241A

death serious injury

fluid

grease the cylinder

order speed the flow

Failure comply could result death

W0261A

can penetrate the skin and cause severe injuries. The

under high Never loosen the grease fitting adaptor completely

grease.

serious injury .

Pressurized system!

Failure comply could result death

Battery

serious injury

W0136A

comply could

Failure

result death serious injury W01 1

gas can explode!

prevent explosion:

the negative

Failure comply could result death

W001

T o

Always disconnect the negative ( battery cable Always connect

( battery cable last. not short circuit the battery posts with metal objects. not weld, grind, smoke near a battery .

serious injury

comply could result death

W0282A 48175000 02/10/2017 7

serious injury

INTRODUCTION

W ARNING

Burn hazard!

Hot coolant can spray and scald you remove the radiator deaeration tank cap while the system T o remove the cap: allow the system turn the cap the first and wait for all pressure release. Remove the cap only after all pressure has released.

Failure comply could result death serious injury

W ARNING

Escaping fluid!

W0367A

Hydraulic fluid diesel fuel leaking under pressure can penetrate the skin and cause infection other injury T o prevent personal injury: Relieve all pressure before disconnecting fluid lines performing work the hydraulic system. Before applying pressure, make sure all connections are tight and all components are good Never use your hand check for suspected leaks under pressure. Use a piece cardboard wood for this purpose. injured leaking fluid, see your doctor immediately . Failure

W0178A

W ARNING

Chemical hazard!

When handling and other service follow the

W ear Personal Protective Equipment (PPE) instructed. not smoke use open flame. Collect fluids proper containers. Obey all local and environmental regulations when disposing Failure

death serious injury .

W0371A

comply could result

death serious injury

comply could result

48175000 02/10/2017 8

Safety rules - Ecology and the environment

Soil, air , and water quality important for all industries and life general. When legislation does not yet rule the treatment some the substances that advanced technology sound judgment should govern the use and disposal products a chemical and petrochemical

Familiarize yourself with the relative legislation applicable your country , and make sure that you understand this Where legislation obtain information from suppliers anticleaning agents, etc., with regard the fect these substances man and nature and how safely store, use, and dispose these

Helpful hints

• A void the use cans other inappropriate pressurized fuel delivery systems fill Such delivery systems may cause considerable

• avoid skin contact with all

Most these products contain substances that may harmful your

• Modern oils contain not burn contaminated fuels and waste oils ordinary heating

• A void spillage when you drain fluids such used engine coolant engine hydraulic brake etc. not mix drained brake fluids fuels with lubricants. Store all drained fluids safely until you can dispose the fluids a proper way that complies with all local legislation and available

• not allow coolant mixtures get into the soil. Collect and dispose coolant mixtures properly .

• The air - conditioning system contains gases that should not released into the Consult airtioning specialist use a special extractor recharge the system properly

• Repair any leaks defects the engine cooling system hydraulic system immediately

• not increase the pressure a pressurized circuit this may lead a component

• Protect hoses during Penetrating weld splatter may burn a hole weaken allowing the loss

Battery recycling

Batteries and electric accumulators contain several substances that can have a harmful fect the environment the batteries are not properly recycled after Improper disposal batteries can contaminate the groundwater , and NEW HOLLAND CONSTRUCTION strongly recommends that you return all used batteries a NEW HOLLAND CONSTRUCTION dealer , who will dispose the used batteries recycle the used batteries properly . some countries, this a legal requirement.

Mandatory battery recycling

NOTE: The following requirements are mandatory

Batteries are made lead plates and a sulfuric acid solution. Because batteries contain heavy metals such lead, CONAMA Resolution 401 / 2008 requires you return all used batteries the battery dealer when you replace any not dispose batteries your household

Points sale are obliged to:

• Accept the return your used batteries

• Store the returned batteries a suitable location

• Send the returned batteries the battery manufacturer for recycling

INTRODUCTION

48175000 02/10/2017 9

T orque - Standard torque settings

BOL T AND NUT

INTRODUCTION

Use following table for unspecified Coarse thread Bolt size W rench 8 t t x – N·m ( – ) 1 – N·m ( – ) x – N·m ( – ) – N·m ( – ) M10 x 1.5 39.18 –58.84 ( 28.90 –43.40 ) 53.96 –81.35 ( 39.80 –60.00 ) M12 x 72.54 –109.82 N·m ( 53.50 –81.00 ) 96.13 –154.56 N·m ( 70.90 – 1 14.00 ) M14 x 1 – N·m ( – ) – N·m ( – ) M16 x – N·m ( – ) – N·m ( – ) M18 x 2.5 253.54 –343.02 ( 187.00 –253.00 ) 344.38 –466.40 ( 254.00 –344.00 ) M20 x 355.22 –479.96 N·m ( 262.00 –354.00 ) 482.67 –653.50 N·m ( 356.00 –482.00 ) M22 x – N·m ( – ) – N·m ( – ) M24 x 612.83 –828.40 ( 452.00 –1.00 ) 833.83 – 1 128.04 ( 615.00 –832.00 ) M30 x 1217.52 –1645.96 N·m ( 898.00 –1214.00 ) 1658.17 –2245.23 N·m ( 1223.00 –) M36 x 4.0 1709.69 –2310.31 ( 1261.00 –) 2451.32 –3039.74 ( 1808.00 –) Fine thread Bolt size W rench 8 t t M 8 x 1.0 – N·m ( – ) – N·m ( – ) M10 x 44.06 –65.76 ( 32.50 –48.50 ) 57.89 –87.31 ( 42.70 –64.40 ) M12 x 76.47 – 1 13.75 N·m ( 56.40 –83.90 ) 103.99 –157.27 N·m ( 76.70 – 1 16.00 ) M14 x – N·m ( – ) – N·m ( – ) M16 x – N·m ( – ) – N·m ( – ) M18 x 1.5 280.65 –427.08 ( 207.00 –315.00 ) 376.92 –509.79 ( 278.00 –376.00 ) M20 x 391.83 –530.12 N·m ( 289.00 –391.00 ) 523.35 –707.74 N·m ( 386.00 –522.00 ) M22 x – N·m ( – ) – N·m ( – ) M24 x 665.71 –901.62 ( 491.00 –665.00 ) 892.13 –1206.68 ( 658.00 –890.00 ) M30 x 2.0 1342.26 –1815.44 ( 990.00 –1339.00 ) 1781.54 –2435.05 ( 1314.00 –) M36 x 3.0 1884.59 –2548.94 ( 1390.00 –) 2567.92 –3473.61 ( 1894.00 –) Pipe and hose (FLARE type) Thread size (PF) W rench T orque 1 / N·m ( ) 3 / N·m ( ) 1 / 93.14 ( 68.70 ) 3 / 176.26 N·m ( 130.00 ) N·m ( ) 1 - 1 / 343.02 ( 253.00 ) Pipe and hose (ORFS type) Thread size (UNF) W rench T orque 9 /N·m ( ) 1 1 /49.08 ( 36.20 ) /93.14 N·m ( 68.70 ) 48175000 02/10/2017

INTRODUCTION Thread size (UNF) W rench T orque 1 - 3 /176.26 ( 130.00 ) 1 - 7 /206.08 N·m ( 152.00 ) 1 - 1 1 / - N·m ( ) Fitting Thread size W rench T orque 1 / 39.18 N·m ( 28.90 ) 3 / N·m ( ) 1 / 93.14 ( 68.70 ) 3 / 176.26 ( 130.00 ) 206.08 N·m ( 152.00 ) 1 - 1 / N·m ( ) 48175000 02/10/2017 1 1

INTRODUCTION

T orque - Special torque settings

Code Component Bolt size W rench T ightening torque 1 T ravel motor M12 x 1.75 – 1 N·m ( – ) 2 Sprocket M12 x – 1 ( 65.10 –83.18 ) 3 Idler wheel x – N·m ( 21.70 –26.04 ) 4 T rack support roller M12 x 109 – 132 N·m ( – ) 5 T rack frame roller M16 x 262 – 321 N·m ( – ) 6 Grease valve cover M10 x – ( 39.80 –60.00 ) 7 T ravel motor cover M10 x – N·m ( 39.80 –60.00 ) Counterweight M20 x 2.5 514 – 642 N·m ( – ) Additional counterweight M24 x 850 – 1 150 N·m ( – ) 9 Swing bearing M12 x 109 – 132 ( 80.29 –97.65 ) Swing unit M16 x 252 – 342 N·m ( 185.9 –252.2 ) 1 1 Mount (front) M12 x 1.75 120 – 140 N·m ( – ) Front bracket M10 x – ( 43.5 –65.6 ) Engine Mount (coupling) M12 x – ( 66.4 –70.1 ) Radiator M12 x – 156 ( 71.00 – 1 15.00 ) Hydraulic pump Pump M12 x – 1 ( 66.4 –81.1 ) Hydraulic oil tank M12 x – 158 N·m ( – 1 ) x – ( 14.50 –21.70 ) M12 x – 1 N·m ( 53.60 –81.00 ) Fuel tank M12 x 1.75 – 158 N·m ( – 1 ) Main control valve M10 x – ( 39.83 –59.74 ) Main control valve (bracket) M10 x – N·m ( 39.83 –59.74 ) Hydraulic swivel M10 x – N·m ( 39.83 –59.74 ) Remote control valve - Hand control lever x 1 8 – ( 6.15 –9.05 ) Remote control valve - Dozer lever x – ( 14.50 –21.70 ) Remote control valve - Boom swing pedal x – N·m ( – ) Remote control valve - T ravel pedal x – N·m ( 14.50 –21.70 ) Cab M12 x – 158 N·m ( 72.3 – 1 16.5 ) 48175000 02/10/2017

INTRODUCTION SMIL16MEX1225HB 1 48175000 02/10/2017

INTRODUCTION SMIL16MEX1226HB 2 48175000 02/10/2017

Thanks very much for your reading,

Want to get more information,

Please click here, Then get the complete manual

NOTE:

If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com