M95S-ROPS, M105S·ROPS, WSM
G GENERAL Checking Wheel Mounting Nuts Tightening Torgue
A
CAUTION • Never operate tractor with a loose rim, wheel, or axle. • Any time bolts and nuts are loosened, retighten to specified torque. • Check all bolts and nuts frequently and keep them tight. 1. Check the wheel mounting nuts regularly especially when new. If there are loosened, tighten as follows.
3TMACAQOP006A
Tightening torque
Front wheel mounting nut (2WD)
168 to 196 N·m 17.1 to 20.0 kgf·m 124 to 145 ft-Ibs
Front rim and disc mounting nut (4WD) Front wheel mounting nut (4WD)
260 to 303 N·m 26.5 to 31.0 kgf·m 192 to 224 ft-Ibs
Rear rim and disc mounting nut (2WD and 4WD)
260 to 303 N·m 26.5 to 31.0 kgf·m 192 to 224 ft-Ibs
Rear wheel mounting nut (2WD and 4WD)
343 to 401 N·m 35.0 to 41.0 kgf·m 254 to 297 ft -Ibs
(1) Front Wheel Mounting Nut (2) Front Rim and Disc Mounting Nut
(3) Rear Rim and Disc Mounting Nut (4) Rear Wheel Mounting Nut W1042230
[4] CHECK POINTS OF EVERY 100 HOURS Checking Battery Condition
A
CAUTION • Keep electrolyte away from eyes, hands and clothes. If you are spattered with it, wash it away completely with water immediately and get medical attention. • Keep open sparks and flames away from the battery at all times. Hydrogen gas mixed with oxygen becomes very explosive. • Wear eye protection and rubber gloves when working around battery. 1. The factory installed battery is of non-refillable type. If the indicator (2) turns white, do not charge the battery but replace it with new one. 2. Clean the battery surface with a clean cloth. Keep the terminals clean and coated with petroleum jelly. • How to read the indicator Check the battery condition by reading the indicator. State of indicator display Green
Specific gravity of electrolyte and quality of electrolyte are both in good condition.
Black
Needs charging battery.
White
Needs changing battery.
(1) Battery
(2) Indicator W1042636
G-18