The unique riding personality of each board in our collection demanded we develop multiple 3D-base contour patterns. Not every model would benefit from the same amount of Spoon. Each 3D-base contour pattern is matched to the attitude of the board. Speed Channel
Flat
Spoon
3D Contour Base 4.0
3D Contour Base 3.0
Our most advanced 3D-base contour pattern featuring 7mm of spoon bevel in the nose, 4mm in the tail and a 2mm deep Speed Channel between the tail edges. Concave Speed Channel pushes loose snow out from under the board for added speed.
Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.
Available on: Hovercraft, Ultracraft, Storm Chaser
Available on: Flagship, Women’s Flagship, Carbon Flagship, Mind Expander, Lone Wolf (Nose only)
Drawing of the Hovercraft, size 156
Drawing of the Flagship, size 161
TAIL
INSERTS
EFFECTIVE EDGE
INSERTS
NOSE
TAIL
INSERTS
EFFECTIVE EDGE
INSERTS
NOSE
3D Contour Base 2.0
3D Contour Base 1.0
Moderate 3D-base contours featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.
Subtle yet effective 3D-base contours featuring an even balance of 2mm spoon bevel in the nose and 2mm spoon bevel in the tail. Spoon bevel starts just after the rocker point.
Available on: Project X, Aviator, Airheart
Available on: Explorer, Dream Catcher, Discovery, Prodigy
Drawing of the Aviator, size 158
Drawing of the Explorer, size 159
TAIL
INSERTS
EFFECTIVE EDGE
INSERTS
NOSE
TAIL
INSERTS
EFFECTIVE EDGE
INSERTS
NOSE
-9