DEMOLITION PLAN GENERAL NOTES:
DEMOLITION PLAN LEGEND
A.
ALL WORK SHALL BE DONE IN ACCORDANCE WITH THE REQUIREMENTS OF THE LOCAL MUNICIPAL CODE AND ALL APPLICABLE GOVERNING AUTHORITIES
D.
B.
THE CONTRACTOR IS RESPONSIBLE FOR THE REMOVAL AND DISPOSAL OF ALL ITEMS INDICATED FOR DEMOLITION IN ACCORDANCE WITH LOCAL GUIDELINES AND AS PER BUILDING REGULATIONS.
THE CONTRACTOR SHALL WORK EXISTING CONSTRUCTION ADJAC PREPARE ALL ADJACENT SURFAC AREAS TO PROTECT THE FINISHE
E.
C.
THE CONTRACTOR SHALL REMOVE ALL NON-LOAD BEARING ITEMS AS NOTED. NO DEMOLITION SHALL TAKE PLACE THAT WILL LEAVE THE REMAINING STRUCTURE UNSOUND.
WHEREVER ITEMS ARE TO BE RE CONSTRUCTION SO THAT ALL RE MARKS.
F.
REMOVE ALL ELECTRICAL ITEMS WORK SHALL BE DONE IN ACCOR IN TENANT AGREEMENT.
G.
ALL FIRE ALARM WORK IS TO BE P TEFLON WIRE OCCURRED DURIN FIRE DEVICES IS TO BE REPAIRED
H.
PROTECT EXG. BUILDING ARCHIT RESPONSIBLE TO REPAIR ANY DA NEW CONSTRUCTION.
I.
THE CONTRACTOR SHALL PROTE PROPERLY CONTROL THE REMOV
J.
ALL FIREPROOFING ON STRUCTU DAMAGED DURING DEMOLITION/C CONTRACTOR. FIRE RATING OF W
K.
REPAIR ALL OPENINGS IN COLUM ELECTRICAL, TELEPHONE, OR ME
30
3
4
7
4
DEMOLITION PLAN (SEE DEMOLITION PLAN) 1.
REMOVE EXISTING DAMAGED CO STRUCTURAL DRAWINGS. SHORE ACCEPT NEW CONSTRUCTION.
2.
REMOVE PATCHES OF CEILING W PREP AREA AS REQUIRED TO ACC
3.
REMOVE EXISTING DETERIORIATE SIDEWALK PREP AREA AS REQUIR STRUCTURAL DRAWINGS FOR SC
4.
REMOVE EXISTING METAL ROLL D
5.
REMOVE EXISTING STEEL COLUM
15 UP 12 1 11 11
104
6 10
12
RESTROOM
11
6.
REMOVE EXISTING UPPER & DRO UNDERSIDE OF EXISTING SECON 2-HR FIRE-RATED CEILING WHERE
7.
REMOVE EXISTING STOREFRONT ACCEPT NEW CONST.
8.
REMOVE ALL EXISTING LIGHT FIX RECEPTACLES FOR NETWORK AN SAVE EXIT SIGNS AND EMERGEN ON THE RCP AND ELECTRICAL DW
9.
GRIND CONCRETE FLOOR SMOOT PATCH AND REPAIR DAMAGE FRO CONCRETE FINISH. COORDINATE
19 22 5
13
STAIRS
6
12
9
DN
24 12
STAIRS
RESTROOM
10. REMOVE EXISTING PLUMBING FIX NEW CONSTRUCTION.
29 109
10
11. REMOVE ALL EXISTING WALL PAR REMOVE ELECTRICAL SWITCHES
11 11
25 13
LOBBY
12. REMOVE EXISTING DOORS & FRA DOORS SCHEDULED TO BE SAVE
OFFICE
13. REROUTE OR REMOVE EXISTING CONSTRUCTION AND MEP DRAWI 12
22
OPEN OFFICE
±59'-3"
±57'-4"
5
14. REMOVE THE EXG. HVAC EQUIPM THROUGHOUT.
15. DEMOLISH EXISTING MASONRY W INDICATED ON STRUCTURAL DWG LINTELS / BEAMS AND COLUMNS. DRAWINGS. COORDINATE WITH C
105
12
16. REMOVE AND REPLACE EXISTING FOR SCOPE.
11
6 18
18
11
8
17. REMOVE CARPETING, PADDING, A AND RESIDUE FROM FLOOR AND CONSTRUCTION DRAWINGS.
13
18. DEMOLISH THE EXG. CONCRETE FOR NEW RAISED SLAB AS REQU
HALLWAY
19. REMOVE ALL CARPET, PADDING & FINISH. COORDINATE WITH CONS
12 12 14
20. REMOVE THE EXG. BUILT-IN WALL
OFFICE
105
13
21. REMOVE EXG. UNUSED HVAC RO TO ACCEPT NEW HVAC UNITS. RE REPAIR ROOFING AND FLASHING
15 8
13
22. REMOVE EXG. FLOOR DRAINS AN TO MATCH FLOOR FINISH.
106
16
16
23. CLEAN AND REPAIR EXISTING WIN PAINT AND PREP FOR NEW PAINT
12
18
OFFICE
9
24. REMOVE EXISTING SOFFIT AND P
25. REMOVE AND REROUTE STORM W NEW STEEL BEAM. RECONNECT DRAWINGS FOR SCOPE OF WORK
13
4
26. REMOVE & REPLACE EXISTING RO
14
14
14 23
27. PATCH AND REPAIR ROOFING AT DRAWINGS.
23
28. REMOVE EXISTING SKYLIGHT CON NEW REPLACEMENT
29. DEMOLISH MASONRY TO ACCOMM DRAWINGS.
30. REMOVE EXG CONCRETE SIDEWA AND CURB.
±24'-2"
±1'-8"
±24'-2"
±50'-0"
fig. 107 - Ground Floor Demolition Plan
152
N
1ST FLOOR DE