11 C-52
4G6 ENGINE <1992> - Throttle Bodv DISASSEMBLY SERVICE POINTS
QAo
THROTTLE POSITION SENSOR AND IDLE AIR/ SPEED CONTROL MOTOR REMOVAL (1) Do not disassemble the sensor and motor. (2) Do not immerse the sensor and motor in cleaning solvent. Clean them with shop towel.
~BI) THROTTLE BODY REMOVAL (1) Do not remove the throttle valve. (2) Check if the vacuum port or passage is clogged. Use compressed air to clean the vacuum passage.
Red cl Blue MD998463 7FUO29(1
MD998463
7FUO29C
Operational Check (1) Connect Test Harness to the idle air control motor connector. (2) Connect the positive 0 terminal of 6 volt battery to white clip and green clip of Test Harness.
MD998463
7F11007F
TSB Revision