466 ENGINE <1992> - Timing ,Felt - DOHC
IIC-37
REMOVAL SERVICE POINTS OAi) TIMING BELT REMOVAL (1) Make a mark on the back of the timing belt indicating the direction of rotation so that it may be reassembled in the same direction if it is to be reused. NOTE (1) Water or oil on the belt shortens its life drastically, so the removed timing belt, sprocket, and tensioner must be free from oil and water. These parts should not be washed. Replace parts if seriously contaminated. (2) If there is oil or water on each part, check the front case oil seals, camshaft oil seal and water pump for leaks.
OBo OIL PUMP SPROCKET REMOVAL (ENGINE WITH SILENT SHAFTS) Refer to “@o OIL PUMP SPROCKET REMOVAL” on page 11 c-29.
of@ CRANKSHAFT BOLT REMOVAL (1) Using the special tool, hold the drive plate or flywheel. (2) Remove the crankshaft bolt.
ODo CRANKSHAFT SPROCKET REMOVAL
~EI)
&hdd~l~ELT “B” REMOVAL (ENGINE WITH SILENT Refer to “OEO TIMING BELT “B” REMOVAL” on page 11 c-29.
TSB Revision
I