IIC-34
4G6 ENGINE <1992> - Timing Belt - SOHC
6EN0563
6EN0564
(3) Remove the plug on the cylinder block and insert a Phillips screwdriver [shank diameter 8 mm (.31 in.) ] through the hole (Engine with silent shafts). If it can be inserted as deep as 60 mm (2.4 in.) or more, the timing marks are correctly aligned. If the inserted depth is only 20 - 25 mm (.8 - 1.0 in.), turn the oil pump sprocket one turn and realign the timing marks. Then check to ensure that the screwdriver can be inserted 60 mm (2.4 in.) or more. Keep the screwdriver inserted until installation of the timing belt is finished. (4) Install the timing belt on the crankshaft sprocket, oil pump sprocket and camshaft sprocket in that order. There should be no slack on the tension side.
(5) Loosen the tensioner mounting bolt and tensioner spacer. Tensioner spacer
Timing mark
(6) Turn the crankshaft clockwise by two teeth of camshaft sprocket (or crankshaft sprocket).
(7) Apply force to the tensioner in the direction shown by arrow @I to make the belt engage completely with each sprocket.
1 TSB Revision