1 IC-33
4G6 ENGINE <1992> - Timing Belt - SOHC I)F4 OIL PUMP SPROCKET INSTALLATION
(1) Insert a Phillips screwdriver [shank diameter 8 mm (31 in.)] through the plug hole on the left side of the cylinder block to block the left silent shaft. (2) Install the oil pump sprocket. (3) Apply an appropriate amount of engine oil to the bearing surface of the nut. (4) Tighten the nut to the specified torque. Screwdriver 6EN0564
I)G4
TENSIONER INSTALLATION (1) Hook the tensioner spring ends to the water pump body projection and tensioner bracket. (2) Move the tensioner fully toward the water pump and tighten the bolt and tensioner spacer.
Tensloner
-
6EN0555
I)H4 TIMING BELT INSTALLATION (1) Align the timing marks on camshaft sprocket and crankshaft sprocket with their mating marks. (2) Align the timing mark on the oil pump sprocket with its mating mark.
Timing mark Timing mark for on-vehicle service only
/
I/
ilange
-/
Timing mark
Cal nshaft sprocket
Crankshaft
6EN0475
1 TSB Revision