MOTION SYSTEM TRENDS Shown here is a custom design from Mach III with quarter for perspective. This brake provides tension on the filaments used to make false eyelashes. • Torque rating of 15 lb-in. at 80 psi • 2.58 in. O.D. and 1.27 in. overall length • 0.50 in. shaft size with a 0.125 in. keyway
Custom
gets tiny
CLUTCHES AND BRAKES as well as torque limiters continue to evolve
as the requirements for new applications for holding, stopping, and indexing continue to multiply. The ongoing trend for these technologies towards application-specific variations continues unabated — especially as several industries have exceeded capabilities of legacy stock parts.
Developed for a holding application, this custom C-face friction brake connects to an Allen Bradley servomotor and Apex planetary gearbox. It has a low-backlash design operation to 5,000 rpm. • Torque rating of 90 lb-in. • 3.94-in. O.D. and 3.78-in. housing length • Connections include 12-mm input bore with clamp collar and 12-mm output shaft
“Mach III has experienced a strong increase in application inquiries for miniature clutches, brakes, and torque limiters. In 2019, we had 14 new projects requiring a miniature clutch, brake, or torque limiter — more than in the prior three years combined,” explains president of Mach III Clutch Inc. Lesli Riehemann. “So far, we’ve started 2 new miniature projects in 2020 — one of which is a brake that is only 0.78 Inch O.D. x 1.75 in. long. Mach III defines miniature as requiring a 2-in. or smaller friction diameter, and a bore or shaft size of a half inch or less. Our assembly technicians joke that may need to get in touch with Santa’s workshop to subcontract assembly of these miniature products to the elves.” In an entirely different development, Andrew Lechner of R+W (who details his company’s new informative coupling in the couplings section of this Design World Trend issue) mentioned a similar IoT functionality that may soon come to a new line of torque limiters from the component manufacturer. Interestingly enough, we’re also known for ball-detent torque limiters. These are mechanical-overload release devices that (like couplings) install close to the business end of motion axes. Sensors here would be better at monitoring the machine performance than systems tracking amp draw at the motor. That’s why we may soon incorporate sensors into torque limiters as well.
This is a custom Mach III friction torque limiter from the front and side and shown with quarter for perspective. This torque limiter was developed to protect a motor inside a vehicle — in turn housing a camera to inspect underground pipes. • Max slip torque setting is 70 lb-in. • 1.275-in. O.D. and 0.58-in. overall length
46
motioncontroltips.com
|
designworldonline.com
