ECOVISION ENERGY SOLUTIONS, LLC.
3350 Riverwood Pkwy, S.E. Suite GL-25, Atlanta, GA 30339
P- 770-951-9653 F– 770-951-1477 www.ecovisionlighting.com
FEATURES & SPECIFICATIONS INTENDED USE To retrofit an existing T12 or T8 fluorescent light fixture into a T5. When used in tandem with a de lamping program, proven energy reductions have been achieved between 40 & 80 percent. ATTRIBUTES An adapter which incorporate its on proprietary ballast that allows a T5 bulb to fit into and operate in an existing T12 or T8 light fixture. CONSTRUCTION Factory milled aluminum housing with extruded high density plastic end caps with integral T5 sockets. Formed plastic reflector, with Mylar reflector film insert. FINISH Powder coated mechanically adhered for superior paint adhesion and rust resistance. Painted parts finished with highly reflective matte white enamel. BULB COMPATABILITY Uses a standard T5 bulb 2 FT, 3 FT or 4 FT ELECTRICAL SYSTEM Can operate on 120v, 277v or 347v. Proprietary ballast is enclosed in body of adapter. Ballast is rated for 60000 hours and has a power factor of .99. LISTING MET. E113075 to the UL 935 standard. NRTL approved. WARRANTY Guaranteed for five years against mechanical defects in manufacture. Specification subject to change without notice.
LINEAR T5 ADAPTER—2FT AVAILABLE WITH/WITHOUT REFLECTOR
2FT Adapter W/Reflector
Instalation and wiring plan
Check the voltage range to make sure they correspond with the fixture. Make Sure the existing fixture is with an inductive ballast, electronic ballast or rapid start ballast. the 277v adapter is an universal adapter. Before LIve Neutral
After Electronical Ballast
1 2 3 4
Helico T5 adapter [Mad:HEN, HES, MEN, MES]
L LISTE RT
EcoVision Energy Solutions, LLC. An Exclusive North American Distributorâ€”Under License by Always Earth Friendly, LLC. since 2011.
UL 935 CSA C 22.2 NO.74 E 113075