Stocked Product Catalogue
7th Edition
C Clla assssiicc S Se erriie ess P Prre essssu urre eG Ga au ug ge ess (((DDDrrryyy))) WGI Classic series pressure gauges are for general service applications where cost savings are needed. WGI Classic series gauges are used in many different industries such as pumping systems, hydraulic or pneumatic systems and compressor packages and also as a contractors gauge.
Specifications Case Material Black steel Fill Fluid None Lens Material Glass Dial White aluminum with black and red lettering Pointer Black aluminum Accuracy ± 3%-2%-3% ASME B40.1 Grade B WJ4600 Series
Tube & Socket Brass tube soldered to brass socket Temperature Limits -20°C (-4°F) to 70°C (158°F) ambient and medium Pressure Ranges -30” Hg. Vacuum to 1000 psi/kpa Sizes 1½”, 2”, 2½” & 3½”
Ordering Information Classic 150
Classic 200
Classic 250
Connection
1/8” BTM
1/8” CBM
1/4” BTM
1/8” CBM
1/4” CBM
1/4” CBU
1/4” BTM
1/4” CBU
Pressure Range 30” Hg Vac 30” Hg. x 30 psi 30” Hg. x 160 psi 30” Hg. x 300 psi 0-15 psi / kpa 0-30 psi / kpa 0-60 psi / kpa 0-100 psi / kpa 0-160 psi / kpa 0-200 psi / kpa 0-300 psi / kpa 0-400 psi / kpa 0-600 psi / kpa 0-1000 psi / kpa
1½” Dial WJ0405 WJ0412 N/S N/S WJ0440 WJ0442 WJ0446 WJ0448 WJ0452 WJ0454 WJ0458 WJ0460 WJ0464 WJ0472
1½” Dial WJ0605 WJ0612 N/S N/S WJ0640 WJ0642 WJ0646 WJ0648 WJ0652 WJ0654 WJ0658 WJ0660 WJ0664 WJ0672
2” Dial WJ1405 WJ1412 N/S N/S WJ1440 WJ1442 WJ1446 WJ1448 WJ1452 WJ1454 WJ1458 WJ1460 WJ1464 WJ1472
2” Dial N/S N/S N/S N/S N/S WJ1842 WJ1846 WJ1848 WJ1852 WJ1854 N/S N/S N/S N/S
2” Dial WJ2005 WJ2012 WJ2018 N/S WJ2040 WJ2042 WJ2046 WJ2048 WJ2052 WJ2054 WJ2058 WJ2060 WJ2064 WJ2072
2” Dial WJ2605 WJ2612 WJ2618 WJ2624 WJ2640 WJ2642 WJ2646 WJ2648 WJ2652 WJ2654 WJ2658 WJ2660 WJ2664 WJ2672
2½” Dial WJ4605 WJ4612 WJ4618 WJ4624 WJ4640 WJ4642 WJ4646 WJ4648 WJ4652 WJ4654 WJ4658 WJ4660 WJ4664 WJ4672
2½” Dial WJ6205 WJ6212 WJ6218 WJ6224 WJ6240 WJ6242 WJ6246 WJ6248 WJ6252 WJ6254 WJ6258 WJ6260 WJ6264 WJ6272
Classic 350 1/4” BTM 3½” Dial WJ8005 WJ8012 WJ8018 WJ8024 WJ8040 WJ8042 WJ8046 WJ8048 WJ8052 WJ8054 WJ8058 WJ8060 WJ8064 WJ8072
1/4” CBU 3½” Dial WJ8805 WJ8812 WJ8818 WJ8824 WJ8840 WJ8842 WJ8846 WJ8848 WJ8852 WJ8854 WJ8858 WJ8860 WJ8864 WJ8872
C Clla assssiicc S Se erriie ess P Prre essssu urre eG Ga au ug ge ess (((DDDrrryyy))) Dimensions Classic Series – Bottom, Center Back Mount & U-Clamp A
D
Panel Cutout K E
200 0 15
250
30 300
20 100
40
50
350
50
10
0
B
C
0
40 0
60 PSi KPa
L - NPT
J
G
Series WJ04 WJ06 WJ14 WJ18 WJ20 WJ26 WJ46 WJ54 WJ62 WJ80 WJ88
A
B
C
42 / 1.65
10.0 / 0.39 34.0 / 1.3
42 / 1.65
10.0 / 0.39
n/a
52.5 / 2.06
10.0 / 0.39 46.0 / 1.8
52.5 / 2.06
D
E
G
J
K
L
n/a
23.0 / 0.9
8.0 / 0.3
n/a
n/a
1/8” npt
n/a
n/a
n/a
1/8” npt
n/a
n/a
1/4" npt
41.0 / 1.6 25.0 / 0.98 n/a
28.0 / 1.1 10.0 / 0.4
12.0 / 0.47
n/a
48.0 / 1.8 28.0 / 1.1
n/a
n/a
n/a
1/4" npt
52.5 / 2.06
12.0 / 0.47
n/a
48.0 / 1.8 28.0 / 1.1
n/a
n/a
n/a
1/4" npt
58.0 / 2.2
12.0 / 0.47
n/a
48.0 / 1.8 30.0 / 1.18
n/a
35.0
51.5 / 2.0
1/4" npt
68.0 / 2.6
12.0 / 0.47 50.0 / 1.9
n/a
n/a
1/4" npt
68.0 / 2.6
12.0 / 0.47
n/a
48.0 / 1.8 28.0 / 1.1
n/a
n/a
n/a
1/4" npt
68.0 / 2.6
12.0 / 0.47
n/a
48.0 / 1.8 30.0 / 1.18
n/a
48.0
62.5 / 2.0
1/4" npt
89.0 / 3.5
12.0 / 0.47 50.0 / 1.9
n/a
n/a
1/4" npt
98.0 / 3.8
12.0 / 0.47
75.0
88.0 / 3.4
1/4" npt
Dimensions: Mm / Inch
n/a
n/a
n/a
28.0 / 1.1 10.0 / 0.4
29.0 / 1.14 12.0 / 0.47
51.0 / 2.0 32.0 / 1.2
n/a
E Elliitte ug ge ess (((LLLiiiqqquuuiiiddd FFFiiilllllleeeddd))) e2 25 50 0B Brra assss S Se erriie ess P Prre essssu urre eG Ga au WGI Elite series brass pressure gauges have a 304 stainless steel case for use in harsh or corrosive environments, liquid filled for significant cushioning and pulsation dampening which reduces pointer flutter and internal damage. Industries suited for include oil and gas equipment, refineries, hydraulic equipment, agricultural equipment, pressure washers, pumps, compressors and process systems.
Specifications Case Material
304 stainless steel, top nitrile vent plug with valve and lens seal
Fill Fluid Silicone Lens Material Acrylic & safety glass (ranges over 5000psi) Dial White aluminum with black and red lettering Pointer Black aluminum Accuracy ± 2%-1%-2% ASME B40.1 Grade A Tube & Socket Brass tube soldered to brass socket Temperature Limits -60°C to 70°C ambient and medium Pressure Ranges -30” Hg. Vacuum to 15,000 psi/kpa
WJ7600 Series
Sizes 2½”
Connection Pressure Ranges 30” Hg Vac 30” Hg. x 30 psi 30” Hg. x 60 psi 0-15 psi / kpa 0-30 psi / kpa 0-60 psi / kpa 0-100 psi / kpa 0-160 psi / kpa 0-200 psi / kpa 0-300 psi / kpa 0-400 psi / kpa 0-600 psi / kpa 0-1000 psi / kpa 0-1500 psi / kpa 0-2000 psi / kpa 0-3000 psi / kpa 0-5000 psi / kpa 0-6000 psi / kpa 0-7500 psi / kpa 0-10000 psi / kpa 0-15000 psi / kpa
Elite 250 Brass 1/4” BTM 1/4” CBU WJ7605P WJ7612P WJ7614P WJ7640P WJ7642P WJ7646P WJ7648P WJ7652P WJ7654P WJ7658P WJ7660P WJ7664P WJ7672P WJ7674P WJ7676P WJ7678P WJ7682P WJ7684P WJ7686P WJ7690P WJ7692P
WJ7205P WJ7212P WJ7214P WJ7240P WJ7242P WJ7246P WJ7248P WJ7252P WJ7254P WJ7258P WJ7260P WJ7264P WJ7272P WJ7274P WJ7276P WJ7278P WJ7282P WJ7284P WJ7286P WJ7290P WJ7292P
Three Hole Front Flange Part Number 127751
E Elliitte ug ge ess (((LLLiiiqqquuuiiiddd FFFiiilllllleeeddd))) e2 25 50 0B Brra assss S Se erriie ess P Prre essssu urre eG Ga au Dimensions Elite 250 Brass – Bottom Mount & U-Clamp 30.5 / 1.2
Ø68.5 / 2.7
200 0 15
250
30 300
20
50
350
50
10
62 / 2.4
100
40
0 0
55 / 2.2
40 0
60 PSi KPa
NPT 1/4"
10 / 0.4
Elite 250 – Back Mount
68.5 / 2.7
56 / 2.2
Panel Cutout 61 / 2.4
90 / 3.5
30 / 1.2 200 15
0
250
13 / 0.5
30 300
40
100
20
50
350
50
10
60 PSi KPa
40 0
0
0
Part Number NPT 1/4" 127751 48 / 1.9
*All Dimensions mm / inch
Three Hole Front Flange
E Elliitte urre eG eS Ga au Stta ug ge aiin ess (((LLLiiiqqquuuiiiddd FFFiiilllllleeeddd))) nlle essss S Stte ee ell S Se erriie ess P Prre essssu WGI Elite series pressure gauges have a 304 stainless steel case for use in harsh or corrosive environments, liquid filled for significant cushioning and pulsation dampening which reduces pointer flutter and internal damage. Industries suited for include oil and gas equipment, refineries, hydraulic equipment, agricultural equipment, pressure washers, pumps, compressors and process systems.
Specifications Case Material 304 stainless steel, top nitrile vent plug with valve and lens seal Fill Fluid Silicone Lens Material Acrylic & safety glass (standard on WH109 series) Dial White aluminum with black and red lettering Pointer Black aluminum Accuracy Elite 150/250 ± 2%-1%-2% ASME B40.1 Grade A Elite 400 ± 1% full scale ASME B40.1 Grade A Tube & Socket 316L stainless steel
Elite 250 & Elite 400
Temperature Limits -60°C to 60°C ambient and medium Pressure Ranges -30” Hg. Vacuum to 15,000 psi/kpa Sizes 1½”, 2”, 2½”, 4” & 6”
Connection Pressure Range 30” Hg Vac 30” Hg. x 30 psi 30” Hg. x 60 psi 30” Hg. x 150 psi 30” Hg. x 300 psi 0-15 psi / kpa 0-30 psi / kpa 0-60 psi / kpa 0-100 psi / kpa 0-160 psi / kpa 0-200 psi / kpa 0-300 psi / kpa 0-400 psi / kpa 0-600 psi / kpa 0-1000 psi / kpa 0-1500 psi / kpa 0-2000 psi / kpa 0-3000 psi / kpa 0-5000 psi / kpa 0-6000 psi / kpa 0-7500 psi / kpa 0-10000 psi / kpa 0-15000 psi / kpa n/s = Not Stocked
Elite 150 1/8” CBM 1½” Dial
Elite 200 1/4" CBM 2” Dial
Elite 250 1/4” BTM 2½” Dial
Elite 250 1/4” CBU 2½” Dial
Elite 400 1/4" BTM 4” Dial
Elite 400 1/4” LBU 4” Dial
Elite 400 1/2” BTM 4” Dial
n/s n/s n/s n/s n/s n/s WJ1042P WJ1046P WJ1048P WJ1052P WJ1054P WJ1058P n/s n/s n/s n/s n/s n/s n/s n/s n/s n/s n/s
n/s n/s n/s n/s n/s n/s WJ1542P WJ1546P n/s WJ1552P n/s n/s n/s n/s n/s n/s n/s n/s n/s n/s n/s n/s n/s
WJ7805P WJ7812P WJ7814P WJ7818P WJ7824P WJ7840P WJ7842P WJ7846P WJ7848P WJ7852P WJ7854P WJ7858P WJ7860P WJ7864P WJ7872P WJ7874P WJ7876P WJ7878P WJ7882P WJ7884P WJ7886P WJ7890P WJ7892P
WJ7405P WJ7412P n/s n/s n/s WJ7440P WJ7442P WJ7446P WJ7448P WJ7452P WJ7454P WJ7458P WJ7460P WJ7464P WJ7472P WJ7474P WJ7476P WJ7478P WJ7482P WJ7484P WJ7486P WJ7490P WJ7492P
WH10705P WH10712P WH10714P WH10718P WH10724P WH10740P WH10742P WH10746P WH10748P WH10752P WH10754P WH10758P WH10760P WH10764P WH10772P WH10774P WH10776P WH10778P WH10782P WH10784P WH10786P WH10790P WH10792P
WH10805P WH10812P WH10814P WH10818P WH10824P WH10840P WH10842P WH10846P WH10848P WH10852P WH10854P WH10858P WH10860P WH10864P WH10872P WH10874P WH10876P WH10878P WH10882P WH10884P n/s WH10890P WH10892P
WH10905P WH10912P WH10914P WH10918P WH10924P WH10940P WH10942P WH10946P WH10948P WH10952P WH10954P WH10958P WH10960P WH10964P WH10972P WH10974P WH10976P WH10978P WH10982P WH10984P n/s WH10990P WH10992P
E Elliitte urre eG eS Ga au Stta ug ge aiin ess (((LLLiiiqqquuuiiiddd FFFiiilllllleeeddd))) nlle essss S Stte ee ell S Se erriie ess P Prre essssu Dimensions Elite 150 Stainless Steel – Center Back Mount 41 / 1.6 Ø42 / 1.6
Fill Plug
25 / 0.9
NPT1/8" 200 15
250
0
10 / 0.4
30 300
20 100
40
50
350
50
10
0
40 0
60
0
PSi KPa
Elite 250 Stainless Steel – Bottom Mount & U-Clamp 30.5 / 1.2
Ø68.5 / 2.7
68.5 / 2.7
56 / 2.2
Panel Cutout 61 / 2.4
90 / 3.5
30 / 1.2 200 0 15
250
200
30
0 15
Ø62 / 2.4
100
50
50
10
60 60
0
PSi KPa
40 0
0
40 0
PSi KPa
0
83 / 3.2
0
13 / 0.5 40
350
50
350
50
10
20
300
100
40
250
30
300
20
Part Number NPT 1/4" 127751 Three Hole Front Flange
48 / 1.9 NPT 1/4" WJ74 Series
WJ78 Series 10 / 0.4
Elite 400 – Bottom Mount & U-Clamp 46.5 / 1.8
Ø111 / 4.3
76 / 2.9
250
100
40
50
60 PSi KPa
40 0
0
83 / 3.2
0
350
50
10
26 / 1.0
300
20
Ø99.5 / 3.9
30
NPT 1/4"
8 / 0.3
# WH109 / 107
*All Dimensions mm / inch
16 / 0.6
102 ID
152 OD
U-CLAMP 30 / 1.1
# WH108
NPT 1/2" NPT 1/4"
Panel Cutout 99.5 / 3.9
0 15
48.75 / 1.9
XP FLANGE KIT 200
24 / 0.9
76
E Elliitte e4 45 50 0P Prro occe essss P Prre essssu urre eG Ga au ug ge ess (((NNNAAACCCEEE))) WGI Elite 450 process gauge was engineered for the oil and gas and industrial process industries. The WGI elite 450 process gauge was also designed with the operator’s safety in mind. In the event of over-pressuring resulting in a leak in the bourdon tube, a (blow-out back) solid wall separates internally from the ruptured bourdon tube forcing the process media through the back of the gauge.
Specifications Case Material Polypropylene safecase solid front blowout back Fill Fluid Silicone Lens Material Acrylic Dial White aluminum with black and red lettering Pointer Black aluminum Accuracy ± 0.5% Full scale ASME B40.1 Grade 2A Tube & Socket 316L stainless steel Temperature Limits -40°C to 60°C ambient and medium Pressure Ranges -30” Hg. Vacuum to 20,000 psi/kpa
Elite 450
Sizes 4½”
Ø148 / 5.8
200 0 15
80 / 3.1
250
40
100
20
Ø126 / 4.9
30
50
60 PSi KPa
40 0
0
20 / 0.7
105 / 4.1
0
65 / 2.5
50
10
350
Elite 450 1/2” BTM 4½” Dial WP5605P WP5612P WP5614P WP5640P WP5642P WP5646P WP5648P WP5652P WP5654P WP5658P WP5660P WP5664P WP5668P WP5674P WP5676P WP5678P WP5682P WP5684P WP5686P WP5690P WP5692P WP5694P
300
Connection Pressure Range 30” Hg Vac 30” Hg. x 30 psi 30” Hg. x 60 psi 0-15 psi / kpa 0-30 psi / kpa 0-60 psi / kpa 0-100 psi / kpa 0-160 psi / kpa 0-200 psi / kpa 0-300 psi / kpa 0-400 psi / kpa 0-600 psi / kpa 0-1000 psi / kpa 0-1500 psi / kpa 0-2000 psi / kpa 0-3000 psi / kpa 0-5000 psi / kpa 0-6000 psi / kpa 0-7500 psi / kpa 0-10000 psi / kpa 0-15000 psi / kpa 0-20000 psi / kpa
39 / 1.5
W WG GII D Diia ap ph hrra ag gm mG Ga au ug ge ess (((DDDrrryyy))) WGI Diaphragm gauges are sensitive instruments used in low pressure applications not exceeding 10 PSI. The diaphragm capsule is an elastic metal sensing element comprised of two thin wall diaphragms that are soldered together to make the capsule. Typical applications include air flow indicators, liquid level indicators, leak testers, natural gas gauges and any other application that requires precise measurement of pressures below 10 PSI.
Specifications Case Material Drawn Steel Fill Fluid None Lens Material Acrylic Dial White aluminum with black lettering Pointer Black aluminum Accuracy ± 2-1-2% Full scale Internals & Diaphragm Brass & 316 stainless steel Temperature Limits -20°C to 60°C ambient and medium Pressure Ranges -30” H20 Vacuum to 10 psi
WG22xxx
Sizes 2½”
316 SST
0-10” H2O / 2.5KPA
WG22675
*n/s
0-15” H2O / 8.75OZ / 3.7KPA
WG22706
WG22706SS
0-15” H2O / 3.7KPA
WG24500
*n/s
0-30” H2O / 7.5KPA
WG22704
*n/s
0-35" H2O / 20OZ / 8.6KPA
WG22709
WG22709SS
0-55" H2O / 32OZ / 13.8KPA
WG22707
WG22707SS
0-100" H2O / 58OZ / 25KPA
WG22710
WG22710SS
0-3PSI / 20KPA
WG22685
WG22685SS
0-5PSI / 34KPA
WG22702
WG22702SS
0-10PSI / 69KPA
WG22699
WG22699SS
Vacuum Ranges & Compound Ranges
WG22913
*n/s
0-15" H2O VAC / - KPA
WG22912
*n/s
0-30" H2O VAC / - KPA
WG22914
*n/s
0-60" H20 VAC / - KPA
WG22918
*n/s
0-100" H20 VAC / - KPA
WG24502
*n/s
*n/s= Non stock
43 / 1.6
9 / 0.3
Part Numbers
0-30” H2O VAC x 50” H2O
Dimensions: mm / Inch
49 / 1.9
14x14 1/4"NPT
55 / 2.1
Brass
Ø67 / 2.6
Pressure Ranges
M Miid essssu dw we urre esstt IIn eG Ga au nssttrru ug ge ess um me en ntt D Diiffffe erre en nttiia all P Prre A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control.
Specifications Case Material Aluminum or 316 stainless steel Fill Fluid Glycerin Lens Material Shatter resistant acrylic Dial White aluminum with black lettering Pointer Black aluminum Accuracy ± 3-2-3% Full scale (ascending) Wetted Parts Aluminum or 316 stainless steel
Model 120
Temperature Limits -40°C(-40°F) to 93°C(200°F) ambient and medium Pressure Ranges 0-5 through 0-110 psid (0.35 to 7.0 bar) Sizes 2½” and 4½” Connection 1/4" female npt
Differential pressure is sensed by the movement of a floating piston magnet against a calibrated spring. The gauge pointer, outside the pressure housing, follows the movement of the piston magnet and indicates differential pressure. Available with magnetically actuated hermetically sealed CSA listed reed switches to provide high and low limit alarm or control.
An optional maximum indication follower pointer provides automatic indication of maximum differential occurring during a time period or system cycle. Reversed pressure ports are optionally available to facilitate installation and readability depending on which side of a filter, etc., the instrument must be installed.
M Miidd--W Weesstt IInnssttrruum Gaauuggeess meenntt D Diiffffeerreennttiiaall P Prreessssuurree G How to order
□□□-□□-□□-□□□□-□□□ 1
2
0
1.BASIC MODEL NUMBER
6. OPTIONS (up to four options) O. A. B. C. D. F. L. M. T. U. V. W. X. Z.
None (standard) Reversed High/Low Process Connections DIN2353 12-S (12mm) Steel tube fittings Mounting Holes in Gauge Body (Electrical Options A & B) Mounting Holes in Gauge Body (Electrical Options L & M) Pipe Mounting Kit (Carbon steel) Liquid Filled (not available with 3-1/2” dial) Maximum indicating pointer Oxygen Cleaning S.S. Tag Mounted w/S.S. Wire S.S. Tag Mounted w/S.S. Screws Wall Mounting Kit Individual Gauge Packaging Special (Uncoded Options)
2. MATERIAL A. Aluminum body, s.s. piston (standard) M. Monel Body (See 120 ABM) N. Aluminum Bronze Body (see 120 ABM) S. 316 S.S. Body & S.S. psiton (standard) Z. Special
A. 2-1/2” Round Uni-Directional B. 2-1/2” Round Bi-Directional C. 4-1/2” Round Uni-Directional D. 4-1/2” Round Bi-Directional E. 3-1/2” Round Uni-Directional F. 3-1/2” Round Bi-Directional G. 4-1/2” Round Uni-Directional H. 4-1/2” Round Bi-Directional T. Non-Indicating Differential Pressure Switch Only Z. Special (Uncoded Options)
4. SEALS 0. Buna N (Standard) 1. Biton 2. Neoprene 4. Teflon 5. Ethylene 6. Perfluoroelastomer 9. Special
5. CONNECTIONS 0. 1/4" FNPT Back Connection 2. 1/4" FNPT End Connections 6. 7/16” – 20 Str. Thd. O-Ring Port 7. 1/2" FNPT Stainless Steel Adapters 8. 1/2" FNPT Monel Adapters 9. Special (uncoded Options)
7. ELECTRICAL O. A. B. C. D. E. F. G. H. J. K. L. M. Z.
None One (1) Switch in Std. Enclosure with grommet wire seal Two (2) Switches in STD. Enclosure with grommet wire seal One (1) Switch in STD. Enclosure with 1/4" FNPT Electrical con. NEMA 4X Two (2) Switch in STD. Enclosure with 1/4" FNPT Electrical con. NEMA 4X One (1) Switch General Purpose Enclosure C.S.A. & U.L. Listed Div II Two (2) Switch General Purpose Enclosure C.S.A. & U.L. Listed Div II One (1) Switch & Gauge in NEMA 4X Plastic Enclosure Two (2) Switch & Gauge in NEMA 4X Plastic Enclosure One (1) Switch in Explosion Proof Enclosure C.S.A. & U.L. Listing Two (2) Switch in Explosion Proof Enclosure C.S.A. & U.L. Listing One (1) Switch in STD. Enclosure with Plug-In Connector (DIN 43650/IP65) Two(2) Switch in STD. Enclosure with Plug-In Connector (DIN 43650/IP65) Special (Uncoded Options)
8. Electrical Specs A. E. F. G. H. Z.
S.P.D.T. 3W, 0.25 Amp., 125 VAC/VDC S.P.S.T. 60W, 3.0Amp, 240 VAC/VDC S.P.S.T. 60W, 3.0Amp, 240 VAC/VDC S.P.S.T. 60W, 3.0Amp, 240 VAC/VDC One (1) N/Open (1) N/Closed S.P.D.T. 60W, 1.0Amp, 240 VAC/VDC (switch adjustible range of 25-100%) Special (Uncoded Options)
7 8 – (Up to three options)
3. DIAL TYPE
W WG GII C Co on nttrra acctto orr P Prre essssu urre eG Ga au ug ge e (((HHH...VVV...AAA...CCC...))) The WGI contractor pressure gauge was specifically designed for heating, ventilation, air conditioning and plumbing applications. The WGI contractor pressure gauge is ideal for use in any medium not corrosive to copper alloys such as air, oil, water and steam.
Specifications Case Material 304 stainless steel Fill Fluid None Lens Material Acrylic Dial White aluminum with black and red lettering Pointer Black aluminum Accuracy ± 1% Full scale ASME B40.1 Grade 1A Tube & Socket Copper alloy / Brass Temperature Limits -20°C to 60°C ambient and medium Pressure Ranges 30”Hg. to 600 psi WH94XX
Sizes 4½”
Range
WH9440
0 – 15 PSI/KPA
WH9442
0 – 30 PSI/KPA
WH9446
0 – 60 PSI/KPA
WH9448
0 – 100 PSI/KPA
WH9452
0 – 160 PSI/KPA
WH9454
0 – 200 PSI/KPA
WH9458
0 – 300 PSI/KPA
WH9460
0 – 400 PSI/KPA
WH9464
0 – 600 PSI/KPA
Dimensions
: mm / Inch
200 0 15
250
30 20
1.0CL
40
50
10
0
60 PSi KPa
40 0
30” HG X 150 PSI/KPA
100
WH9418
0
WH9416
350
30” HG X 30 PSI/KPA 30” HG X 100 PSI/KPA
300
WH9412
32.5 / 1.2
Ø114.3 / 4.5
50
Part Number
NPT 1/4"
10 / 0.4
W WG Ga GII A au ug ge Ag e (((DDDrrryyy))) grriiccu ullttu urra all A Am mm mo on niia aP Prre essssu urre eG The WGI agricultural ammonia pressure gauge was specifically designed to withstand all the punishment involved in manufacturing, distributing and applying ammonia as an agricultural fertilizer. Typical applications include bulk storage tanks, field tanks, processing equipment, metering devices and applicator equipment.
Specifications Case Material Corrosion resistant steel case and ring Fill Fluid None Lens Material Acrylic or Glass Dial White aluminum with black lettering Pointer Black aluminum Accuracy ± 3%-2%-3% ASME B40.1 Grade B Tube & Socket Bourdon tube 304 stainless steel, Socket carbon steel Temperature Limits -20°C to 60°C ambient and medium Pressure Ranges 0-60, 0-150, 0-400 psi
WW0264
Sizes 2½ & 4”
Dial Size Connection Pressure Ranges 0-60 psi 0-150 psi 0-400 psi
2½” Dial 1/4" npt
4” Dial 1/4" npt
WW0160 WW0162 WW0164
WW0260 WW0262 WW0264
W WG Th GII W hrre ea Wh ad hiitte dS Se eT ea all T Te effllo Ta ap on pe n& e &Y Ye ellllo ow wU UL LC CG Ga ass T WGI Teflon tape is a rugged inert tape made from 100% pure, virgin PTFE. It is highly resistant to acids, alkalies, solvents and gases. WGI Teflon tape is clean and easy to use, never dries out and doesn't drip or run. Use WGI tapes anywhere you need strength, thickness and resistance on threaded connections. It keeps its protective qualities indefinitely and adapts to galvanized iron, stainless steel, brass, plastic or fiberglass. Underwriters Laboratory of Canada Approved. Meets US military specification MIL-T-27730A.
Specifications Sizes 1/2" x 480” 3/4" x 480” 1” x 480” Thickness White Tape 3mm Yellow Tape 4mm Conforms to Military Specification T-27730A ULC Approved CMH1677-ISS.#1C
TT-1/2 & GTT-1/2
Service Rating -240°C to 260°C (-400°F to 500°F) Pressure Rating Yellow Gas Tape 2250 psi
General Purpose White Tape Part Number Size Color TT-1/2 1/2" White TT-3/4 3/4" White TT-1 1” White ULC Gas Approved Yellow Tape Part Number Size Color GTT-1/2 1/2" Yellow GTT-3/4 3/4" Yellow GTT-1 1” Yellow
W WG GII R Ru ub bb beerr G Gaau ug gee G Gu uaarrd dss WGI rubber gauge guards are used to protect pressure gauges from accidental physical damage. Made to fit a 2½” bottom or back mount pressure gauge.
Part # PGG-2.5 PGG-2.5B
Color Black Blue
W WG errss GII G Ge en ne erra all P Pu urrp po osse eP Prre essssu urre eS Sn nu ub bb be WGI Pressure snubbers are used to significantly lessen the damaging effects of pulsation on pressure gauges, pressure transducers, transmitters, pressure switches and many other different types of pressure instruments. WGI Pressure snubbers are for use in light oil water and gases.
Specifications Process Connection 1/4" NPT or 1/2” NPT male x female Material Brass or 316 stainless steel Pressure Rating Brass 3000 psi 316 stainless steel 20,000 psi Operating Temperature Brass -53°C to 343°C (-65°F to 343°F) 316 stainless steel -195°C to 815°C (-320°F to 1500°F) 25B – A50S – A25S
Part Number 25B A25S A50S
Material Brass 316 Stainless Steel 316 Stainless Steel
Size 1/4" NPT 1/4" NPT 1/2" NPT
Dimensions Part Number 25B A25S A50S
Material Brass 316 Stainless Steel 316 Stainless Steel
P 1/4" 1/4" 1/2"
L 1.376” 1.376” 1.750”
H 0.812” 0.812” 1.00”
A/F 3/4" 3/4" 1-1/16
® P Prre de err®”” essssu urre eL Liim miittiin ng gV Va allv ve e ““G Ga au ug ge eM Miin nd The Model 200 “Gauge Minder” features a pressure limiting valve that blocks off excess pressure to the instrument, preventing calibration failure, internal damage, and “blow-out” from over-ranging - a principal cause of instrument failure. The Model 200 is supplied with a set of range springs designed to set the shutoff pressure point at any pressure from 50 to 5000 PSI. The automatic shutoff valve is positive on closing and is non-chattering. Once closed, pressure need only be reduced approximately 10% of set pressure to re-open the valve.
Specifications Connection 1/4" or 1/2” NPT Body & Stopper Material Aluminum, Brass & 316 stainless steel Pressure Rating 5000 psi working pressure Operating Temperature -40°C to 120°C Adjustment 1/4" Allen head adjustment Accuracy ± 10% of set value Seals Buna, Viton, Teflon, Neoprene or special materials
PLEASE PHONE FOR CURRENT PRICING
Model 200
D Diia ap ph hrra ag gm m/ /C Ch he em miicca all S Se ea allss When choosing a diaphragm seal, choose NOSHOK for unsurpassed quality, service, and delivery. NOSHOK recommends the use of a diaphragm seal for all applications involving, but not limiting corrosive media, particles in the media, viscous media, temperature issues, and the use of oxidizing agents. NOSHOK offers a wide variety of diaphragm seal configurations and housing materials. In house assembly, liquid filling, and accuracy verifications is provided for most of our diaphragm seals. Let NOSHOK put together the precise diaphragm seal assembly that will meet all your specific application needs.
General Specifications Sizes 1/4" – 1” NPT or 150#, 300# or 600# flanged available Fill Fluids Silicone, High temperature silicone, Glycerin, Lower Housing Materials Optional Steel, 304SS, 316SS, Hastelloy B or C, Monel, Nickel, PVC, Teflon, Brass, Titanium & Polypropylene Diaphragm Materials – 316 Stainless Standard Special Materials include 304SS, Monel, Tantalum, Hastelloy B & C, Carpenter 20, Nickel, Titanium & Teflon Optional Features 316SS top housing with SS rings, nuts and bolts. Pipe plugs for flushing connections. Flange faces – raised face, flat face or ring joint Capillary Lines If your application requires a stainless steel capillary line, specify one of the following and your desired length when ordering. • Stainless Steel plain tube 1/4" NPT • Stainless Steel plain tube 1/2" NPT • Stainless Steel armored 1/4" NPT • Stainless Steel armored 1/2" NPT Pressure Ratings 25AW - 1000 psi 15AW - 1500 psi
Stocked Models Part Number 15AW-1/4 25AW-1/2
Miniature Seals Size 1/4" FNPT 1/2" FNPT
Material 316 Stainless 316 Stainless
NOTE: OTHER SIZES AND CONFIGURATIONS AVAILABLE UPON REQUEST
W WG GII B Ba arrrre ell & &P Piig gtta aiill S Siip ph ho on nss WGI Barrel Siphons are a cost effective way to maximize gauge life. WGI Barrel siphons are made from solid bar to produce a rigid mount and easy installation. Barrel siphons are used to reduce the temperature of the medium before reaching the instrument. WGI Pigtail Siphons are recommended for services involving temperatures above 100°F (37°C). On steam service, the siphon will prevent steam from entering a pressure gauge, diaphragm seal or transmitter. WGI Pigtail siphons are available in carbon and 316 stainless steel.
Specifications Sizes 1/4" & 1/2" NPT Material Carbon or 304/316 Stainless Steel Pressure Ratings BS-1/2 3000 psi PS-1/4 2000 psi or 5000 psi PS-1/2 2000 psi or 5000 psi Pigtail Siphon Optional Materials Special Materials include 304SS, Monel, Tantalum, Hastelloy B & C, Carpenter 20, Nickel & Titanium BS-1/2 & PS-1/4
Pigtail Siphon Optional Styles Single, Double or Triple loops Temperature Rating BS-1/2 700°F @ 3000 psi
Stocked Models Part Number BS-1/2 BS-1/4 Part Number PS-1/4 PS-1/2 PSS-1/4 PSS-1/2
Barrel Siphon Size 1/2" NPT male x female 1/4" NPT male x female Pigtail Siphon Size 1/4" MNPT 1/2" MNPT 1/4" MNPT 1/2” MNPT
Material 316 Stainless 316 Stainless Material Carbon Steel Carbon Steel 316 Stainless 316 Stainless
M Ma mo asstte om me ette err--T errss Te em mp p2 20 00 0/ /3 30 00 0B Biim me etta all T Th he errm Specifications Case Material 303 stainless steel Dial White aluminum black lettering Pointer Black aluminum Dial Dished white aluminum with black lettering Accuracy ± 1% full scale Connection 1/4", 1/2" NPT Center back mount or 1/2" adjustable angle
WL51 / WL33
Window Glass Stem 1/4" O.D. 304 stainless steel 2½” - 36” Dial Size 2” & 3” External Reset Stainless steel hex located on rear of case
Dial Size Connection Stem Length Range -40°F to 160°F (-40C to 70°C) 0°F to 250°F (-20°C to 120°C) 50°F to 500°F (10°C to 260°C) Dial Size Connection Stem Length Range -40°F to 160°F (-40C to 70°C) 0°F to 250°F (-20°C to 120°C) 50°F to 300°F (10°C to 150°C) 50°F to 500°F (10°C to 260°C) 150° to 750°F (50°C to 400°C) 200° to 1000°F (100° to 550°C) Dial Size Connection Stem Length Range -40°F to 160°F (-40C to 70°C) 0°F to 250°F (-20°C to 120°C) 50°F to 300°F (10°C to 150°C) 50°F to 500°F (10°C to 260°C) 150° to 750°F (50°C to 400°C) 200° to 1000°F (100° to 550°C)
2” Dial 1/4” NPT Center Back Mount 2½” 4” 6” 9” WL11102 WL11105 WL11108
WL11202 WL11205 WL11208
2½”
4”
WL31102 WL31105 WL31106 WL31108 WL31110 WL31111
WL31202 WL31205 WL31206 WL31208 WL31210 WL31211
2½” WL33102 WL33105 WL33106 WL33108 WL33110 WL33111
WL11302 WL11305 WL11308
2½”
n/s n/s n/s
n/s n/s n/s
1/2” NPT Center Back Mount 4” 6” 9” WL21202 n/s n/s
3” Dial 1/2” NPT Center Back Mount 6” 9” 12” WL31302 WL31305 WL31306 WL31308 WL31310 WL31311
WL31402 WL31405 WL31406 WL31408 WL31410 WL31411
WL31502 WL31505 WL31506 WL31508 WL31510 WL31511
WL21302 WL21305 n/s
15”
18”
WL31602 WL31605 WL31606 WL31608 WL31610 WL31611
WL31702 WL31705 WL31706 WL31708 WL31710 WL31711
3” Dial 1/2” NPT Center Back Mount Adjustable Angle 4” 6” 9” 12” 15” WL33202 WL33205 WL33206 WL33208 WL33210 WL33211
WL33302 WL33305 WL33306 WL33308 WL33310 WL33311
WL33402 WL33405 WL33406 WL33408 WL33410 WL33411
WL33502 WL33505 WL33506 WL33508 WL33510 WL33511
WL21405 n/s
POR POR POR POR POR POR
18” POR POR POR POR POR POR
M Ma asstte err--tte em mp p5 50 00 0B Biim me etta all T Th he errm mo om me ette errss Specifications Case Material 303 stainless steel Dial White aluminum black lettering Pointer Black aluminum Dial Dished white aluminum with black lettering Accuracy ± 1% full scale Connection 1/2" NPT Center back mount or 1/2" adjustable angle
WL51 / WL33
Window Glass Stem 1/4" O.D. 304 stainless steel 2½” - 36” Dial Size 5” External Reset Stainless steel hex located on rear of case
Dial Size Connection Stem Length Range -40°F to 160°F (-40C to 70°C) 0°F to 250°F (-20°C to 120°C) 50°F to 300°F (10°C to 150°C) 50°F to 500°F (10°C to 260°C) 150° to 750°F (50°C to 400°C) 200° to 1000°F (100° to 550°C) Dial Size Connection Stem Length Range -40°F to 160°F (-40C to 70°C) 0°F to 250°F (-20°C to 120°C) 50°F to 300°F (10°C to 150°C) 50°F to 500°F (10°C to 260°C) 150° to 750°F (50°C to 400°C) 200° to 1000°F (100° to 550°C)
2½”
4”
WL51102 WL51105 WL51106 WL51108 WL51110 WL51111
WL51202 WL51205 WL51206 WL51208 WL51210 WL51211
2½” WL53102 WL53105 WL53106 WL53108 WL53110 WL53111
5” Dial 1/2” NPT Center Back Mount 6” 9” 12” WL51302 WL51305 WL51306 WL51308 WL51310 WL51311
WL51402 WL51405 WL51406 WL51408 WL51410 WL51411
WL51502 WL51505 WL51506 WL51508 WL51510 WL51511
15”
18”
WL51602 WL51605 WL51606 WL51608 WL51610 WL51611
WL51702 WL51705 WL51706 WL51708 WL51710 WL51711
5” Dial 1/2” NPT Center Back Mount Adjustable Angle 4” 6” 9” 12” 15” WL53202 WL53205 WL53206 WL53208 WL53210 WL53211
WL53302 WL53305 WL53306 WL53308 WL53310 WL53311
WL53402 WL53405 WL53406 WL53408 WL53410 WL53411
WL53502 WL53505 WL53506 WL53508 WL53510 WL53511
POR POR POR POR POR POR
18” POR POR POR POR POR POR
M Ma asstte err--tte em mp pB Biim me etta all T Th he errm mo om me ette errss Stocked Ranges Range
Major Divisions °F °C 10 10 10 10 10 10 25 10 50 10 50 10
-40°F to 160°F (-40C to 70°C) 0°F to 250°F (-20°C to 120°C) 50°F to 300°F (10°C to 150°C) 50°F to 500°F (10°C to 260°C) 150° to 750°F (50°C to 400°C) 200° to 1000°F (100° to 550°C)
Minor Divisions °F °C 2 2 2 2 2 2 5 5 10 5 10 5
Dimensions Series WL11000 WL21000 WL31000 WL33000 WL51000 WL53000
Dial Size 2” 2” 3” 3” 5” 5”
A 2.13” 2.13” 3.27” 3.27” 5.26” 5.26”
B 0.425” 0.425” 0.835” 0.835” 0.910” 0.910”
C 1/4" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT
D (Hex) 0.546” 0.822” 0.822” 0.822” 0.822” 0.822”
E n/a n/a n/a 1.75” n/a 1.75”
S See Nominal Lengths On Part Number Charts
A RESET B
A
D E RESET
S
C
D C
B S
BACK CONNECTION
ADJUSTABLE ANGLE
W WG GII T Th he errm mo ow we ellllss This device is used to protect a thermometer / thermocouple / rtd from any pressure in the process, and allows replacement of the instrument without shutting down the system.
Specifications Standard Bore Sizes 0.260”, 0.385” & 0.702” Process Connections NPT threaded or Flanged (RF, FF & RTJ) Standard Materials 316SS Optional Materials Brass or naval brass, aluminum, carbon steel, Chrome-moly, 304SS, 316LSS, alloy-20, inconel, Monel, nickel, titanium, hastelloy B or C & Teflon Optional Lagging Extensions, Stainless steel plug and chain, full penetration weld on flange, Teflon or Kynar coating, MTR test reports & hydrostatic internal testing Available Stem Lengths 2½” through 36” Process Connections 1/2”, 3/4” & 1” threaded NPT, 150#, 300# & 600# flanged 900# RTJ & 150# RTJ
Process Connection
½” Male NPT Process Connection
¾” Male NPT
Part Number
½-025-316 ½-040-316 ½-060-316 ½-090-316ST Part Number
¾-025-316 ¾-025-316-385 ¾-025-316-702 ¾-035-316-702 ¾-040-316 ¾-040-316-385 ¾-040-316-702 ¾-045-316-702 ¾-050-316-702 ¾-060-316 ¾-060-316-385 ¾-060-316-702 ¾-090-316 ¾-120-316
Process Connection
Part Number
1” Male NPT
1-025-316 1-025-316-702 1-035-316-702 1-045-316-702 1-040-316 1-060-316 1-090-316 1-120-316
Stem Length
Insertion “U”
Bore Size
Overall Length
2 ½” 4” 6” 9”
1 3/8” 2 ½” 4 ½” 7 ½”
.260 .260 .260 .260
2 ¾” 4 ¼” 6 ¼” 9 ¼”
Stem Length
Insertion “U”
Bore Size
Overall Length
2 ½” 2 ½” 2 ½” 2 ½” 4” 4” 4” 4 ¼” 5” 6” 6” 6” 9” 12”
1 3/8” 1 3/8” 1 3/8” 2” 2 ½” 2 ½” 2 ½” 3” 3 ½” 4 ½” 4 ½” 4 ½” 7 ½” 10 ½”
.260 .385 .702 .702 .260 .385 .702 .702 .702 .260 .385 .702 .260 .260
2 ¾” 2 ¾” 2 ¾” 2 ¾” 4 ¼” 4 ¼” 4 ¼” 4 ¼” 5 ¼” 6 ¼” 6 ¼” 6 ¼” 9 ¼” 12 ¼”
Stem Length
Insertion “U”
Bore Size
Overall Length
2 ½” 2 ½” 2 ½” 4 ¼” 4” 6” 9” 12”
1 3/8” 1 3/8” 2” 3” 2 ½” 4 ½” 7 ½” 10 ½”
.260 .702 .702 .702 .260 .260 .260 .260
2 ¾” 2 ¾” 2 ¾” 4 ¼” 4 ¼” 6 ¼” 9 ¼” 12 ¼”
W WG GII 9 9”” IIn nd du ussttrriia all T Th he errm mo om me ette err WGI 9” (229mm) adjustable angle thermometer is mainly used by the boiler industry in HVAC applications. WGI 9” (229mm) industrial thermometer comes standard with a 9” (229mm) aluminum case, 3½” stem and optional brass thermowell. Case is a durable die cast aluminum with dark blue powder coating. The adjustable angle case can be moved to any viewing position for enhanced readability
Specifications Case Material Die-cast blue V-shaped Aluminum Dial White aluminum black lettering Fill Fluid Red reading spirit for ranges up to 240°F/C Ranges above 240° F/C contain mercury as spirit cannot exceed 300°F/C Accuracy ± 1% full scale Stem Length 3½” stem standard optional 6½”, 9½” or 12” Connection 1¼” UNF brass jam nut Thermowell ¾” NPT Window Acrylic
WAA33
Dimensions & Part Numbers Part Number WAA3301 WAA3303 WAA3304 WAA3305 WAA3308
58 / 2.2
Range -40°/110°FC 0-120°FC 0-180°FC 30/240°FC 50/550°FC
WGI
261.5 / 10.3
Thermowell Part Number T1E3D2 (Brass) T6E3D2 (316 Stainless)
427.5 / 16.8
Dimensions: mm / inch
74.7 / 2.9
32HEX 11/4 "-18T
Ø11 / 0.43
W WG GII 7 7”” A Ad djju usstta ab blle eA An ng glle eT Th he errm mo om me ette err WGI 7” (177mm) adjustable angle thermometer is mainly used by the construction industry in HVAC applications. WGI 7” (177mm) industrial thermometer comes standard with a 7” (177mm) aluminum case, 2½” stem. Case is durable die cast aluminum with dark blue powder coating. The adjustable angle case can be moved into any viewing position for enhanced readability.
Specifications Case Material Die-cast blue Aluminum Dial White aluminum black lettering Fill Fluid Red reading spirit Accuracy ± 1% full scale Pointer Black aluminum Stem Length 2½” stem standard Process Connection Thermowell - 1/2" MNPT WAA23
Window Acrylic
Dimensions & Part Numbers Part Number WAA2302 WAA2305
DIMENSIONS (mm)
Range -40°/110°FC 30°/240°FC
W WG mp peerraattu urree / /A Allttiittu ud dee)) GII T Trriid diicca atto orrss ((PPrreessssuurree // TTeem WGI Tridicators indicate pressure, temperature and altitude in one compact instrument. WGI Tridicators are intended for use on all types of hot water heating systems.
Specifications Case Material Drawn steel Tube & Socket Bronze tube, Brass Socket Pointer Black & Red Aluminum Dial White aluminum with black lettering Accuracy ± 1% full scale Connection 1/2" NPT Window Glass Stem 1/4" Brass stem Dial Size 3½”
Y22004
Dial Scale Triple scale psi, feet of water & Degrees Celsius & Fahrenheit
Part Number Y22002 Y22004 Y22006 Y22008
Connection Bottom Bottom Lower Back Lower Back
Temp Range 30°/260° F/C 30°/260° F/C 30°/260° F/C 30°/260° F/C
Pressure Range 0-60 psi / kpa 0-100 psi / kpa 0-60 psi / kpa 0-100 psi / kpa
Dimensions: mm / inch
51.5 / 2.0 Ø9 / 0.3
18 / 0.7
Ø9 / 0.3
21x21
27.5 / 1.0
1/2"NPT
77.5 / 3.0
91 / 3.5 21 / 0.8
21x21 1/2" NPT
38.5 / 1.5
27 / 1.0
92.5 / 3.6 77.5 / 3.0
38.5 / 1.5 27.5 / 1.0
92.5 / 3.6
92.5 / 3.6 77.5 / 3.0
92.5 / 3.6 77.5 / 3.0
52 / 2.0
Pocket Test Thermometers 9840 Digital Pocket Thermometer Range -58° to 302°F (-50° to 150°C)
Stem 5” Pointed stainless steel
Dial Size 1/4" LCD Display
Accuracy
9840
± 2°F or 1°C
Part Number
Temperature Range
9841 & 9848 (Nema 4)
-40° to 302° FC
General Purpose Pocket Thermometer Bi-metal Pocket Test Thermometer Dial Size 1 3/8” Dial
Stem 5” Pointed stainless steel
Recalibration External recalibration screw on rear of case
Accuracy ± 2% Full Scale PT1835
Lens Clear acrylic
Part Number
Temperature Range
PT1835-160FC PT1835-250FC PT1835-500FC
-40° to 160° F/C 0° to 250° F/C 50° to 500° F/C
Glass Alcohol Pocket Thermometer GT-120 Pocket Test Thermometer Range -58° to 302°F (-50° to 150°C)
Stem Glass
Scale Size 5” Scale
Accuracy
GT-120
± 2°F or 1°C
Part Number
Temperature Range
GT-120
-40 to 120°C
WGI Hot Water Heating Thermometer WGI hot water thermometers are typically used in hot water heating systems, boilers and hydronic heating systems, etc. Each thermometer comes standard with a ½” NPT or ½” solder removable brass thermowell for maintaining a sealed system. In addition WGI hot water thermometers come standard with a rear recalibration screw.
WGI Hot Water Thermometer Case Polished Aluminum
Range 30° to 240° F/C
Connection Comes with 1/2" npt brass thermowell
Dial Size 2½”
Accuracy ± 2°F or 1°C
Part Number
Temp Range
HWT2.5/250
30°/240° F/C Thermowells
HWT-SOLDER HWT-NPT
Magnetic Surface Thermometer WGI bi-metal magnetic surface thermometers are ideal for use on engines, bearings, pipes, tanks, ovens, dies, molds or any flat metallic surface. Rear recalibration adjustment standard.
WGI Pocket Test Thermometer Dial Size 2”
Lens Clear acrylic
Case Black aluminum
Mounting Two magnets on rear of case
Accuracy ± 2% full scale
Part Number
Temp Range
311FC 312FC 313FC
-100 to 160° F/C 0 to 250° F/C 50° to 500° F/C
Minimum Maximum Thermometers This thermometer is designed to read the temperature from two different probes on 9’9” (3 Meter) cables. It records the minimum and maximum temperatures for the current 24 hour period and for six previous periods. The Advanced microprocessor circuit allows the thermometer to collect temperature data while the display is turned off. This saves battery life and only operates the LCD display during the time it is needed to read the temperature and recall any min/max data.
Taylor 1441 Digital Min / Max Thermometer Range -40 to 120° F ( -40 to 50°C )
Case Plastic
Display Type LCD
Accuracy ± 1.8°F or 1°C
Part Number
Temp Range
1441
-40°/120° F
Raytek Mini-Temp Infrared Thermometers The new MiniTemp MT6 is the ideal introduction to non contact thermometers for technicians new to infrared. The MiniTemp MT6 unit features the popular single dot laser sighting system and the large temperature display provides current and maximum readings together while scanning, all in a conveniently sized handheld tool with a protective boot for added durability.
Raytek MT Series Infrared Thermometers Temperature Range -30° to 500°C (-20° to 932°F)
Accuracy ± 1.5% of reading or ± 2°C
Scales Switchable degrees F or C
Emissivity Preset at 0.95
Sighting Laser sight
Part Number
Description
MT6
Laser Sight, Comes With Soft Carry Case
R Re em mo otte eV Va ap po orr T Th he errm mo om me ette errss Marshalltown vapor tension thermometers offer the ideal solution for applications that require remote readings within the -40° to 240°F (-40° to 115°C) range. Typical vapor tension thermometer applications include food processing equipment, milk coolers, air conditioners and air ducts, hot and chilled water systems, boilers, pipelines, tanks and industrial ovens...Wherever remote readings are needed.
Specifications Case Material Black steel Fill Fluid None Lens Material Acrylic Dial White aluminum with black lettering Pointer Black aluminum Accuracy ± 3%-2%-3% Movement Brass sector with polycarbonate side plates Bulb Length 2½” standard, optional 3½” & 4½” Case Styles Flush u-clamp, three hole front flange, rear flange or plain. Sizes 2”, 2½”, 3½” & 4½”
K35250
Capillary 6 feet standard, for longer capillaries insert length to end of part number i.e. for a 10 foot capillary the part number would be K35250-010
Dial Size Case Pattern
Connection Bulb Insertion Bulb Type Capillary Temperature Ranges -40° to 65° F/C -40° to 120° F/C
0° to 120° F/C 0° to 180° F/C 30° to 240° F/C 50° to 300° F/C
2”
2½”
3½”
Flush UClamp
3 Hole Front Flange
Flush UClamp
3 Hole Front Flange
Flush UClamp
3 Hole Front Flange
Rear Flange
Plain Case
2½” ½” union 6 Feet
2½” ½” union 6 Feet
2½” ½” union 6 Feet
2½” ½” union 6 Feet
2½” ½” union 6 Feet
2½” ½” union 6 Feet
2½” ½” union 6 Feet
2½” ½” union 6 Feet
K20110 K20120 K20130 K20140 K20150 K20160
K20210 K20220 K20230 K20240 K20250 K20260
K25110 K25120 K25130 K25140 K25150 K25160
K25210 K25220 K25230 K25240 K25250 K25260
K36110 K35120 K35130 K36140 K35150 K35160
K35210 K35220 K35230 K35240 K35250 K35260
K35610 K35620 K35630 K35640 K35650 K35660
K35310 K35320 K35330 K35340 K35350 K35360
DIFFERENT SIZES AND CONFIGURATIONS AVAILABLE
M Maarrsshhaallllttoow wnn R Reem moottee V Vaappoorr TThheerrm moom meetteerrss Dimensions Flush Mount (U-Clamp)
Flush Uclamp
Dial Size
A
B
C
H
2"
2.06
2.52
0.06
0.94
Cutout 2.12
2 1/2"
2.59
2.94
2.81
0.94
2.66
3 1/2"
3.66
2.94
4.00
0.94
3.72
Dial Size
A
B
C
D
E
3 1/2" 4 1/2"
4.75 6.19
1.5 1.4
3.72 4.81
4.31 5.69
0.219 0.281
Rear Flanged
3 Hole Rear Flange
Front Flanged
3 Hole Front Flange
Dial Size
A
B
C
D
E
Y/Z
2"
2.06
0.94
2.85
2.5
0.156
3.375/ .375
Cutout 2.12
2 1/2"
2.49
0.94
3.47
3.12
0.161
3.375/.437
2.65
3 1/2"
3.66
1.06
4.75
4.4
0.219
3.375/.437
3.72
JJM MS SS So ou utth he ea asstt T Th he errm mo occo ou up plle e& &R RT TD D’’ss
JMS Southeast - Provides quality temperature measurement products that are NIST certified and traceable to ITS 90 and IPTS-68. Products include; miniature and industrial thermocouples, bayonet and plastic melt sensors, resistance temperature devices (RTD's), thermowells, protection tubes and coatings, themocouple and RTD wire, transmitters, thermistors, and specialty sensors designed to fit your needs.
Specifications Base Metal Types Type J, K, T, E & N Noble Metal Types Type R, S & B Element Options Standard and special limits of error, grounded, ungrounded or exposed junctions, single and multiple element construction, standard and high purity mgo insulation Lead Termination Options Plugs, jacks, spade lugs & special connectors Sheath Materials 304/310/316/446 Stainless steels, Inconel 600, Nicrobell & H-2300 Sheath Diameters .302, .040, 1/16”, 1/8”, 3/16”, 1/4" or 3/8” Mounting Options Compression fitting, Welded bushings, Flanged, Bayonet fittings & Weld pads Connection Heads General purpose & Explosion proof
JMS Swifty Sensor Service 24 Hour service or less for you emergency needs – No Expediting Charge!
We stock many different sizes and configurations. Please phone for price and delivery
JMS Southeast Products -
Thermocouples
-
RTD’S
-
Wire
-
Protection Tubes
-
Thermowells
-
General Purpose & Explosion Proof Heads
-
Accessories
P PX XS erriie ess T em mp Se pe erra attu urre Te eC on nttrro olllle errss Co Specifications DIN Sizes
1/4, 1/8, 72mm & 1/16
Control Functions
Fuzzy Logic Control with PID Autotune
Front Panel Key Choices
Eight or three button operation
Housing
NEMA 4X Faceplate with LED Display
Multiple Inputs
Choose: T/C, RTD, 4-20mA, 1-5 VDC, 0-20mA or 0-5 VDC
Single or Dual Control Outputs Relay, SSR Driver or 4-20mA
Alarm Options
Process and / or Heater break alarms available
Ramp/Soak Programming
Set four setpoints, four ramp rates and four soak periods
PX SERIES
Low Voltage Power Supply Option 24 V AC/DC supply is optional
How to order
PX SERIES ORDRING INFORMATION P
X
A
B
-
C
D
E
2
-
F
V
-
G
Box A: Model:
Box E: Control Output 2*
W = 3-Button keypad* Z = 8-Button keypad
Y = None A = Relay contact (reverse action) B = Relay contact (direct action) C = SSR/SSC driver (reverse action) D = SSR/SSC driver (direct action) E = 4-20 mA DC (reverse action) F = 4-20 mA DC (direct action) G= Triac 1A, 250 VAC (reverse action)* H= Triac 1A, 250 VAC (direct action)* P = 0-10 VDC (reverse action)* Q = 0-10 VDC (direct action)*
*Same price for all models except 1/16 DIN
Box B: Front panel size 4 = 1/16Din* 8 Button keypad 3 Button keypad 5 = 1/8 DIN 7 = 72 mm 9 = ¼ Din *Mounting Socket Required. See Accessories Section
Box C: Kinds of Input T = Thermocouple ºC R = Thermocouple ºF N = RTD (Pt 100) ºC S = RTD (Pt 100) ºF B = 4-20 mA DC, 1-5VDC A = 0-20 mA DC, 0-5VDC
Box D: Control Output 1 A = Relay contact (reverse action) B = Relay contact (direct action) C = SSR/SSC driver (reverse action) D = SSR/SSC driver (direct action) E = 4-20 mA DC (reverse action) F = 4-20 mA DC (direct action) G= Triac 1A, 250 VAC (reverse action)* H= Triac 1A, 250 VAC (direct action)* P = 0-10 VDC (reverse action)* Q = 0-10 VDC (direct action)* *No agency approvals available for this option
*Not available on PXZ4 *No agency approvals available for this option
Box F: Alarm Options 2 = Heater break alarm* 3 = Process alarm & heater break alarm* 4 = None 5 = Process alarm *Heater break option requires current transformers. See Accessories Section Option not available on PXZ4, or with 4-20mA, 0-10V output
Box G: Power Supply Options Blank = 85 – 264 VAC (standard, no code necessary) D = 24V AC/DC
P PX XR RS erriie ess T em mp Se pe erra attu urre Te eC on nttrro olllle errss Co Specifications DIN Sizes 1/32, 1/16, 1/8 & 1/4 Advanced Control Functions PID Plus Self Tuning; PID Plus Fuzzy Control; Auto-tuning Housing NEMA 4X / IP66 Faceplate with large LED Display Multiple Inputs Choose: T/C, RTD, 4-20mA, 1-5 VDC, 0-20mA or 0-5 VDC Single or Dual Control Outputs Relay, SSR Driver or 4-20mA
PXR SERIES
Programmable Alarm Functions 2 programmable SPST relays with ON/Off delay function Remote Setpoint Option Change setpoint with a 1-5 VDC signal Analog Retransmission Option 4-20mA retransmission of PV, SV, MV, DV Digital Input Option Change between 2 setpoints; Change between ramp/soak and standby; Start/reset ramp/soak; Start Stop autotune; Cancel alarm; Start timer Communications Function RS485 (Modbus protocol) interface allows monitoring up to 31 units from a PC (Windows based software included) How to order
PX SERIES ORDRING INFORMATION P
X
R
A
-
C
D
E
2
F
-
V
-
G
Box A: Front Panel Size
Box E: Alarm Options
3 = 1/32 DIN (24x48mm) 4 = 1/16 DIN (48x48mm) 5 = 1/8 DIN (48x96mm) 9 = 1/4 DIN (96x96mm)
4 = None 5 = High/low alarm 1 point (PXR3 only) 6 = Heater break alarm1,2 G = High/low alarm 2 points H = High/low alarm 2 points + heater break alarm1,2 M = Alarm 3 points D = Remote setpoint3 P = Remote setpoint + alarm 2 points3
Box B: Input Signal T = Thermocouple ยบC R = Thermocouple ยบF N = RTD (Pt 100) ยบC S = RTD (Pt 100) ยบF B = 4-20 mA DC, 1-5VDC A = 0-20 mA DC, 0-5VDC
Box C: Control Output 1 A = Relay contact (reverse action) C = SSR/SSC driver (reverse action) E = 4-20 mA DC (reverse action)
Box D: Control Output 2 Y = None A = Relay contact (reverse action) C = SSR/SSC driver (reverse action) E = 4-20 mA DC (reverse action) R = Retransmission (4-20mA DC)* *Not available on PXR3
1
Heater break option not available with 4-20mA output, or with 2 digital inputs, or with RS485 + 1digital input 2 Heater break option requires current transformers 3 Remote setpoint option not available with RS485 + 1digital input
Box F: Power Supply V = Standard (100-240 VAC, 50/60 Hz) B = 24 V AC/DC (50/60 Hz)
Box G: Additional Functions 0 = None M = RS485 communication (Modbus) Q = Retransmission + DI 1 point R = Retransmission (4-20mA DC) S = Digital input (DI) x 1 T = Digital input (DI) x 21 V = RS485 communication (Modbus) + DI1.3 1
Heater break option not available with 2 digital inputs, or RS485 + 1digital input Remote setpoint option not available with RS485 + 1digital input
3
W WG GII 6 60 01 1S Se erriie ess B Brra assss B Ba allll V Va allv ve ess WGI 601 series brass ball valves “excel” in many different industries including hvac, agricultural, irrigation, hydraulics, and hot water heating systems. WGI 601 series brass ball valves are installed where a quality valve is required.
Specifications Sizes 1/4" through 4” NPT Porting Full port Body Material Cast brass Ball Material Chrome plated brass Seat Material Teflon® 601-1/2
Stem Packing Teflon® Pressure Rating 600 psi WOG / 150 psi working steam pressure Temperature Rating -20° to 300°F (-20 to 150°C) WOG Options Optional solder by solder ends (special order)
Dimensions: mm / inch
Part Number 601-1/4MF-MINI 601-1/4FF-MINI 601-1/4 601-3/8 601-1/2 601-3/4 601-1 601-1-1/4 601-1-1/2 601-2 601-2-1/2 601-3 601-4
A
B
C
D1
E1
Weight
0.22 / 5.6 0.22 / 5.6 0.25 / 6.4 0.375 / 9.5 0.50 / 12.7 0.75 / 19.1 1.00 / 25.4 1.25 / 31.8 1.50 / 38.1 2.00 / 50.1 2.50 / 63.5 3.00 / 76.2 4.00 / 101.6
1.75 / 44.5 1.75 / 44.5 1.75 / 44.5 1.75 / 44.5 2.00 / 50.8 2.25 / 57.2 2.80 / 71.1 3.22 / 81.8 3.60 / 91.4 4.20 / 106.7 5.30 / 134.6 6.25 / 158.8 7.40 / 188.0
0.375 / 10 0.375 / 10 0.375 / 10 0.375 / 10 0.50 / 12.7 0.57 / 14.5 0.70 / 17 0.75 / 19.1 0.75 / 19.1 0.80 / 20.3 1.00 / 25.4 1.20 / 30.5 1.40 / 35.6
1.75 / 44.5 1.75 / 44.5 1.75 / 44.5 1.75 / 44.5 1.95 / 49.5 2.10 / 53.3 2.60 / 66.0 3.00 / 76.2 3.35 / 85.1 3.60 / 91.4 4.50 / 114.3 4.90 / 124.5 5.70 / 144.8
1.5 / 88.9 1.5 / 88.9 3.50 / 88.9 3.50 / 88.9 3.50 / 88.9 4.10 / 104.1 4.70 / 119.4 4.70 / 119.4 5.75 / 146.1 5.75 / 146.1 9.20 / 233.7 9.20 / 233.7 9.20 / 233.7
0.44 / 88.9 0.44 / 88.9 0.44 / 88.9 0.44 / 88.9 0.55 / 0.25 0.77 / 0.35 1.28 / 0.58 2.20 / 1.00 3.04 / 1.38 3.86 / 1.75 8.27 / 3.75 11.02 / 5.00 18.19 / 8.25
W WG allll V GII 6 60 Va 01 allv 1S SS ve SS ess Se erriie ess S Stta aiin nlle essss S Stte ee ell B Ba WGI Excel 601ss series stainless steel ball valve are made of 316 stainless steel and conforms to NACE standard MRO-175-2003 for use in sour gas service. WGI stainless ball valves have a locking handle and mounting pads either for an actuator or wall mounting.
Specifications Sizes 1/4" through 2” NPT Porting Full port Body Material 316 Stainless steel Ball Material 316 Stainless steel Seat Material Teflon®
601SS-1/2
Stem Packing Teflon® Pressure Rating ¼” through ¾” 2000 psi (WOG) 1” through 2” NPT 1500 psi (WOG) Temperature Rating -60° to 450°F (-51 to 232°C) WOG Handle 304 Stainless steel
Dimensions & Part Numbers Part Numbers 601SS-1/4 601SS-3/8 601SS-1/2 601SS-3/4 601SS-1 601SS-1-1-1/4 601SS-1-1/2 601SS-2 E 9 14 h
W2
Ø7.6HOLE (Option)
13 12
Q‘TY
BODY
A351 Gr.CF8M
1
2
BALL
A351 Gr.CF8M
1
3
END CAP
A351 Gr.CF8M
1
4
SEAT
PTFE. , RTFE.
2
5
BODY SEAL
PTFE.
1
6
STEM
SS316
1
7
STEM PACKING
PTFE.
1SET
8
HANDLE
SS304
1
9
HANDLE COVER
PLASTIC
1
10
THRUST WASHER
PTFE.
1
11
GLAND NUT
SS304
1
12
HANDLE WASHER
SS304
1
13
HANDLE NUT
SS304
1
14
LOCKING PAD
SS304
1
H
PART NAME
1
11
DIMENSION
7 5
SIZE
10
ØD
W1
8
MATERIAL
NO.
6 4 2
L/2
3 1
L
601SS 601SS
1/4" 3/8"
601SS 601SS
1/2" 3/4"
601SS 601SS 601SS 601SS
1" 1-1/4" 1-1/2" 2"
mm
D
L
H
E
W1
W2
h
Cv FACTOR
11.0 12.5 15.0 20.0 25.0 32.0 40.0 50.8
59.5 59.5 64.5 77.0 90.5 99.5 118.0 136.5
57.0 57.0 57.6 68.5 72.7 87.7 93.0 104.3
103.0 103.0 103.0 127.0 127.0 156.0 193.0 193.0
12.7 12.7 12.7 22.4 22.4 25.4 25.4 25.4
28.5 28.5 28.5 35.0 35.0 38.1 38.1 38.1
M5xP0.8 M5xP0.8 M5xP0.8 M6xP1.0 M6xP1.0 M6xP1.0 M6xP1.0 M6xP1.0
16.0 16.0 26.0 55.0 110.0 180.0 270.0 500.0
W WG allll V GII B BK Va KH allv H/ /B ve BK ess K3 3S Se erriie ess H Hiig gh hP Prre essssu urre eB Ba WGI BKH high pressure series ball valves are made of nickel plated carbon steel and are primarily used in the hydraulic industry where pressures operate around 5000 psi. WGI BKH series ball valves are field repairable, have blowout proof stems and delrin ball seats.
Specifications Sizes 1/4" through 2” NPT Porting Full port Body Material Carbon steel Ball & Stem Material Nickel plated carbon steel Seat Material Delrin
BKH-1/2
Stem Packing Buna N Pressure Rating 1/4", 3/8” & 1/2" 7250 psi 3/4" through 2” 5000 psi Temperature Rating -20° to 300°F (-20 to 150°C) WOG Handle Die-cast zinc BK3-1/2
Dimensions & Part Numbers
BKH Series - High pressure ball valves Part Number BKH-1/4 BKH-3/8 BKH-1/2 BKH-3/4 BKH-1 BKH-1-1/4 BKH-1-1/2 BKH-2
Working Pressure 7250 PSI 7250 PSI 7250 PSI 5000 PSI 5000 PSI 5000 PSI 5000 PSI 5000 PSI
A
B
C
D
E
F
26 32 35 49 58 81 100 118
6 10 13 20 25 32 38 48
115 115 115 200 200 320 320 320
13.5 17.5 19 24.5 29.5 40.5 50 59
47 52 54 75 83 107 124 138
69 78 104 102 119 120 130 140
3 Way High Pressure Selector Ball Valves – BK3 Series Part Number BK3-1/2 BK3-3/4 BK3-1
Working Pressure 5145 PSI 5145 PSI 5145 PSI
A
B
C
D
E
F
1.38 1.93 2.36
.51 .79 .94
4.21 6.50 6.50
1.31 1.91 1.95
1.57 2.24 2.36
3.62 3.82 4.45
Weight KG 0.4 0.55 0.75 1.63 2.30 3.3 5.4 7.5
P PC CII S So offtt S Se ea att IIn n--lliin ne eC Ch he ecck kV Va allv ve ess Carbon and Stainless steel in-line check valves
Specifications Maximum Working Pressure 7350 PSI Cracking Pressure 7 PSI Poppet “O” Rings Carbon Steel - Buna N Stainless Steel - Viton Sizes 1/4", 3/8”, 1/2", 3/4" & 1” FNPT Temperature Limits Carbon – 22 to 212°F (-30 to 100°C) Stainless - -13°F to 392°F (-25° to 200°C) Spring Material Carbon Steel – 304 Stainless Steel Stainless Steel – 304 Stainless Steel
Dimensions & Part Numbers
Part Number
Nominal Size
Working Pressure
Thread (C)
Cracking Pressure
Rated Flow
A
B (HEX)
Material
WVU-14-F-7 WVU-14-F-7-SS WVU-38-F-7 WVU-38-F-7-SS WVU-12-F-7 WVU-12-F-7-SS WVU-34-F-7 WVU-34-F-7-SS WVU-1-F-7 WVU-1-F-7-SS
1/4" 1/4" 3/8” 3/8” 1/2" 1/2" 3/4" 3/4" 1” 1”
10,000 PSI 5145 PSI 10,000 PSI 5145 PSI 7350 PSI 5145 PSI 7350 PSI 4400 PSI 7350 PSI 3675 PSI
1/4" FNPT 1/4" FNPT 3/8” FNPT 3/8” FNPT 1/2" FNPT 1/2" FNPT 3/4” FNPT 3/4" FNPT 1” FNPT 1” FNPT
7 PSI 7 PSI 7 PSI 7 PSI 7 PSI 7 PSI 7 PSI 7 PSI 7 PSI 7 PSI
5.8 GPM 4.7 GPM 9.47 GPM 10.5 GPM 17.9 GPM 13.1 GPM 29.7 GPM 23.7 GPM 35.8 GPM 36.9 GPM
1.97 1.97 2.36 2.37 2.76 2.56 3.39 2.96 3.94 3.67
.75 .75 .91 .95 1.06 1.07 1.38 1.34 1.62 1.62
C/S 316 SS C/S 316 SS C/S 316 SS C/S 316 SS C/S 316 SS
* All dimensions are in inches.
W WG on GII H nS Stte Ha arrd ee ell dS Se ea att N Ne ee ed dlle eV Va allv ve ess – –C Ca arrb bo Process / Hi flow series
Specifications Sizes 1/8" through 1” NPT Maximum Operating Pressure 10,000 psi Body & Bonnet Material A105 Carbon steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Non rotating for sizes 3/8” and above Temperature Limits -40° to 500°F (-40°C to 260°C)
WN1514
L
'L'
B
MAX.OPEN HEIGHT'C'
MAX.OPEN HEIGHT C
MAX.OPEN HEIGHT 'C'
Dimensions & Part Numbers
B
L1
A L
'SIZE' NPT
D
A
'SIZE' NPT
'D' ORIFICE DIAMETER
Part No. WN1511 WN1512 WN1513 WN1514 WN1516 WN1518 WN1532 WN1534 WN1534N WN1536 WN1537 WN1538 WN1551 WN1552 WN1553 WN1554 WN1556 WN1558 WN1572 WN1574
Size 1/8” 1/4" 3/8” 1/2" 3/4” 1” 1/4" 1/2" 1/2" 3/4" ¾”x½” 1” 1/8” 1/4" 3/8” 1/2" 3/4" 1” 1/4" 1/2"
Pattern G G G G G G G G G G G G A A A A A A A A
D= Orifice All dimensions in mm
Ends FxF FxF FxF FxF FxF FxF MxF MxF MxF MxF MxF MxF FxF FxF FxF FxF FxF FxF MxF MxF
Matl. C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S C/S
'SIZE' NPT
A
'D':ORIFICE DIAMETER
A 28.5 28.5 32.0 38.0 40.0 45.0 28.5 38.0 38.0 38.0 40.0 38.0 45.0 42.0 42.0 42.0 50.0 50.0 60.0 42.0
B 28.5 28.5 32.0 38.0 40.0 45.0 28.5 38.0 38.0 38.0 40.0 38.0 45.0 28.0 28.0 28.0 32.0 36.0 46.0 28.0
C 83.0 83.0 88.0 88.0 92.0 105.0 83.0 88.0 91.0 88.0 93.0 92.0 105.0 88.0 88.0 88.0 90.0 90.0 105.0 85.0
L 60.0 60.0 68.0 89.0 89.0 89.0 76.0 89.0 89.0 89.0 89.0 89.0 80.0 42.0 42.0 42.0 50.0 50.0 60.0 42.0
L1
30.0 32.0 32.0 32.0 32.0 39.0
D 4.2 4.2 6.4 7.0 9.0 12.0 4.2 7.0 7.0 7.0 9.0 7.0 12.0 4.2 4.2 6.4 7.0 9.0 12.0 4.2
Cv 0.40 0.40 0.90 1.10 2.30 3.50 0.40 1.20 1.20 1.20 2.30 1.90 3.50 0.70 0.80 1.60 1.50 4.40 6.20 0.60
W WG nlle GII H essss S Ha arrd Stte dS ee Se ell ea att N Ne ee ed dlle eV Va allv ve ess – –S Stta aiin Process / Hi flow series
Specifications Sizes 1/8" through 1” NPT Maximum Operating Pressure 10,000 psi Body & Bonnet Material 316 Stainless steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Non rotating for sizes 3/8” and above Temperature Limits -40° to 500°F (-40°C to 260°C)
WN1314
L
'L'
B
MAX.OPEN HEIGHT'C'
MAX.OPEN HEIGHT C
MAX.OPEN HEIGHT 'C'
Dimensions & Part Numbers
B
L1
A L
'SIZE' NPT
D
A
'SIZE' NPT
'D' ORIFICE DIAMETER
Part No. WN1311 WN1312 WN1313 WN1314 WN1316 WN1318 WN1332 WN1334 WN1336 WN1337 WN1338 WN1351 WN1352 WN1353 WN1354 WN1356 WN1358 WN1372 WN1374
Size 1/8” 1/4" 3/8” 1/2" 3/4” 1” 1/4" 1/2" 3/4" ¾”x½” 1” 1/8” 1/4" 3/8” 1/2" 3/4" 1” 1/4" 1/2"
Pattern G G G G G G G G G G G A A A A A A A A
D= Orifice All dimensions in mm
Ends FxF FxF FxF FxF FxF FxF MxF MxF MxF MxF MxF FxF FxF FxF FxF FxF FxF MxF MxF
Matl. 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS
'SIZE' NPT
A
'D':ORIFICE DIAMETER
A 28.5 28.5 32.0 38.0 40.0 45.0 28.5 38.0 38.0 40.0 38.0 45.0 42.0 42.0 42.0 50.0 50.0 60.0 42.0
B 28.5 28.5 32.0 38.0 40.0 45.0 28.5 38.0 38.0 40.0 38.0 45.0 28.0 28.0 28.0 32.0 36.0 46.0 28.0
C 83.0 83.0 88.0 88.0 92.0 105.0 83.0 88.0 88.0 93.0 92.0 105.0 88.0 88.0 88.0 90.0 90.0 105.0 85.0
L 60.0 60.0 68.0 89.0 89.0 89.0 76.0 89.0 89.0 89.0 89.0 80.0 42.0 42.0 42.0 50.0 50.0 60.0 42.0
L1
30.0 32.0 32.0 32.0 39.0
D 4.2 4.2 6.4 7.0 9.0 12.0 4.2 7.0 7.0 9.0 7.0 12.0 4.2 4.2 6.4 7.0 9.0 12.0 4.2
Cv 0.40 0.40 0.90 1.10 2.30 3.50 0.40 1.20 1.20 2.30 1.90 3.50 0.70 0.80 1.60 1.50 4.40 6.20 0.60
W WG on GII S nS Stte So offtt S ee ell Se ea att N Ne ee ed dlle eV Va allv ve ess – –C Ca arrb bo Process
Specifications Sizes 1/4" through 1” NPT Maximum Operating Pressure 6000 psi Body & Bonnet Material A105 Carbon steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Non rotating for sizes 3/8” and above
WN5534
Temperature Limits -40° to 500°F (-40°C to 260°C) Seat Material Replaceable Delrin® seat
MAX.OPEN HEIGHT 'C'
B
MAX.OPEN HEIGHT 'C'
Dimensions & Part Numbers
L "SIZE" NPT
'SIZE' NPT
Size 1/4" 1/2" 3/4” 1” 1/4" 1/2" 1/4" 1/2"
Pattern G G G G G G A A
Ends FxF FxF FxF FxF MxF MxF MxF MxF
Matl. C/S C/S C/S C/S C/S C/S C/S C/S
A 28.5 32.0 40.0 45.0 28.5 38.0 42.0 50.0
L D
DRILL HOLES IN GLAND BODY PROVIDED TO PASS THE PROCESS TO OUTLET
Part No. WN5512 WN5514 WN5516 WN5518 WN5532 WN5534 WN5572 WN5574
L1
A
B 28.5 32.0 40.0 45.0 28.5 38.0 28.0 32.0
C 83.0 88.0 92.0 105.0 83.0 88.0 88.0 90.0
'SIZE' NPT
L 60.0 68.0 68.0 80.0 76.0 89.0 42.0 50.0
L1
32.0 32.0 32.0 32.0
D 4.2 7.0 9.0 12.0 4.2 7.0 4.2 7.0
W WG nlle GII S essss S So offtt S Stte ee Se ell ea att N Ne ee ed dlle eV Va allv ve ess – –S Stta aiin Process
Specifications Sizes 1/4" through 1” NPT Maximum Operating Pressure 6000 psi Body & Bonnet Material 316 Stainless steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Rotating
WN5334
Temperature Rating -20° to 300°F (-20 to 150°C) WOG Seat Material Replaceable Delrin® seat
MAX.OPEN HEIGHT 'C'
B
MAX.OPEN HEIGHT 'C'
Dimensions & Part Numbers
L "SIZE" NPT
'SIZE' NPT
Size 1/4" 1/2" 3/4” 1” 1/4" 1/2" ¾” x ½”
Pattern G G G G G G G
Ends FxF FxF FxF FxF MxF MxF MxF
Matl. 316SS 316SS 316SS 316SS 316SS 316SS 316SS
L D
DRILL HOLES IN GLAND BODY PROVIDED TO PASS THE PROCESS TO OUTLET
Part No. WN5312 WN5314 WN5316 WN5318 WN5332 WN5334 WN5336
L1
A
A 28.5 32.0 40.0 45.0 28.5 38.0 38.0
B 28.5 32.0 40.0 45.0 28.5 38.0 38.0
C 83.0 88.0 92.0 105.0 83.0 88.0 92.0
'SIZE' NPT
L 60.0 68.0 68.0 80.0 76.0 89.0 89.0
L1 n/a n/a n/a n/a 32.0 32.0 32.0
D 4.2 7.0 9.0 12.0 4.2 7.0 7.0
W WG GII B Bllo occk k& &B Blle ee ed dN Ne ee ed dlle eV Va allv ve ess Gauge Valves
Specifications Sizes 1/2" x 1/2"(3) or 3/4" x 1/2"(3) NPT Maximum Operating Pressure 10,000 psi Body & Bonnet Material A105 Carbon steel or 316 Stainless steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Non rotating Temperature Limits -40° to 500°F (-40 to 250°C)
WN8534
MAX. OPEN HEIGHT 'C'
Dimensions & Part Numbers WN8536-SW Socket Weld 'C' 12.7"
B
Ø 26.10/26.20
'D' 3/4" SW A
'L'
'SIZE' NPT
'L'
1/2"NPT BLEED 'SIZE' NPT
Part No. WN8534 WN8536 WN8536-SW WN7534 WN7536 D = Orifice
Size ½” x ½” ¾” x ½” ¾” x ½” ½” x ½” ¾” x ½”
Pattern G G G G G
Ends MxF MxF MxF MxF MxF
Matl. 316SS 316SS 316SS C/S C/S
A 32.0 32.0 38.0 32.0 32.0
B 32.0 32.0 38.0 32.0 32.0
C 88.0 88.0 90.0 88.0 88.0
L 95.0 95.0 95.0 95.0 95.0
*L n/a n/a n/a n/a n/a
D 7.0 7.0 7.0 7.0 7.0
*L = Lagged Valve
Lagged Block & Bleed Valve 3” neck extension for piping insulation
No.
Description
QTY.
1 2 3 4 5 6 7 8 9 10 11
Body Gland Body Gland Retainer Gland Seal Check Nut Spindle Trim Handle Washer Lock Pin Dust Cap
1 1 1 2 1 1 1 1 1 1 1
Ends MxF
Matl. 316SS
A 38.0
B 38.0
C 92.0
L 180.0
D 7.0
11 6 5
3 4
10 2
'B'
Pattern G
27.0
Size ¾” x ½”
MAX. OPEN HEIGHT 'C'
Part No. WN8536-3L
9
7
89.0
'A'
INLET NPT
1 '*L' OUTLET NPT
W WG GII B Blle ee ed dN Ne ee ed dlle eV Va allv ve ess Carbon Steel / Stainless Steel
Specifications Sizes 3/4" x 1/2" NPT Maximum Operating Pressure 10,000 psi Body & Bonnet Material A105 Carbon steel or 316 Stainless Steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Non rotating Temperature Rating -40° to 500°F (-40 to 250°C) WOG
WN3337
Dimensions & Part Numbers 8
MAX. OPEN HEIGHT 'C'
11 6 5
3
No. 1 2 3 4 5 6 7 8 9 10 11
BLEED STEM 4 10
'B'
2
9
7 'L1'
BLEED TUBE
'A'
1
'L' 'SIZE' NPT
Part No. WN3537 WN3337
Size ¾” x ½” ¾” x ½”
Pattern G G
Ends MxF MxF
Matl. C/S 316SS
A 32.0 32.0
B 32.0 32.0
C 88.0 88.0
L 95.0 95.0
D 7.0 7.0
Description QTY Body 1 Gland Body 1 Gland Retainer 1 Gland Seal 1 Check Nut 1 Spindle 1 Trim 1 Handle 1 Washer 1 Lock Pin 1 Dust Cap 1
Cv ? ?
W WG GII M Miin niia attu urre eN Ne ee ed dlle eV Va allv ve ess Carbon Steel / Stainless Steel
Specifications Sizes 1/8” & 1/4" NPT Maximum Operating Pressure 6000 psi Body & Bonnet Material A105 Carbon steel or 316 Stainless Steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Rotating
WN0532
Seat Material (WN06 & WN04 Series) PTFE Teflon® Temperature Rating -40° to 500°F (-40 to 250°C)
Dimensions & Part Numbers
Part No. WN0311 WN0312 WN0332 WN0432* WN0511 WN0512 WN0532 WN0632* * SOFT SEAT
Size 1/8” 1/4" 1/4" 1/4" 1/8” 1/4” 1/4” 1/4"
Pattern G G G G G G G G
Ends FxF FxF MxF MXF FxF FxF MxF MXF
Material 316SS 316SS 316SS 316SS C/S C/S C/S C/S
A 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
B 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
C 52.0 52.0 52.0 52.0 52.0 52.0 52.0 52.0
L 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0
D 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0
Cv 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
W WG um GII P me en ntta Pa acck attiio ka ag on ge nV err N Va allv Ne ee ve ed e dlle eV Va allv ve ess – – IIn nssttrru Carbon Steel / Stainless Steel
Specifications Sizes 1/4" , 1/2", or 3/4" x 1/2" NPT Maximum Operating Pressure 6000 psi Body & Bonnet Material A105 Carbon steel or 316 Stainless Steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Non Rotating – 1/2" NPT and larger Temperature Rating -40° to 500°F (-40 to 250°C)
WN1432P
B
MAX.OPEN HEIGHT C
MAX.OPEN HEIGHT 'C'
Dimensions & Part Numbers
L
A L
'SIZE' NPT
D
'SIZE' NPT
'D' ORIFICE DIAMETER
Part No. WN1412P WN1414P WN1432P WN1434P WN1437P WN1612P WN1612PN WN1614P WN1614PN WN1632P WN1632PN WN1634P WN1634PN WN1637P WN1637PN
Size ¼” ½” ¼” ½” ¾”X ½” ¼” ¼” ½” ½” ¼” ¼” ½” ½” ¾”X ½” ¾”X ½”
Pattern G G G G G G G G G G G G G G G
Ends FXF FXF MXF MXF MXF FXF FXF FXF FXF MXF MXF MXF MXF MXF MXF
Material 316SS 316SS 316SS 316SS 316SS CS CS NACE CS CS NACE CS CS NACE CS CS NACE CS CS NACE
A 22.0 28.5 22.0 28.5 30.0 22.0 22.0 28.5 28.5 22.0 22.0 28.5 28.5 30.0 30.0
B 22.0 28.5 22.0 28.5 30.0 22.0 22.0 28.5 28.5 22.0 22.0 28.5 28.5 30.0 30.0
C 74.0 68.0 74.0 68.0 70.0 74.0 74.0 68.0 76.0 68.0 68.0 84.0 84.0 70.0 70.0
L 54.0 76.0 54.0 76.0 76.0 54.0 54.0 76.0 76.0 54.0 54.0 76.0 76.0 76.0 76.0
D 03.2 03.2 03.2 03.2 4.0 03.2 03.2 03.2 03.2 03.2 03.2 03.2 03.2 4.0 4.0
W WG GII 5 olld 5V d Va allv ve eS So offtt S Se ea att T Th hrre ea ad de ed dM Ma an niiffo Carbon Steel / Stainless Steel
For use with D/P transmitters or Chart recorders. Remote mounted, Two process isolation valves, Two equalizing valves and One drain valve on a single block.
Specifications Connection Instrument & Process – 1/2” NPT (F) Maximum Operating Pressure @ 200°F 3000 psi Body & Bonnet Materials CS-A108 / A479 - 316 SS. Stem Material Close tolerance surface finish, cold rolled threads, ASME SA-479 Type 316 SS
WN55314
Gland Packing Adjustable, below stem thread design (PBT), prevent process fluid contact with stem threads. PTFE for Temp. below 400°F/Graphite for Temp. above 400°F. Stem Close tolerance surface finish, cold rolled threads, ASME SA-479 Type 316 SS Needle Tip Self centering hardened & ground. ASME SA-479 Type 316 SS Seat Material Delrin Temperature Rating -40° to 200°F (-40 to 93°C)
Dimensions & Part Numbers 1/2" NPT PROCESS CONNECTION
1.00 0.28 MOUNTING HOLE 2 PLACES
Part Number WM55514 WM55314
Material C/S 316 SS
VENT VALVE 1/2" NPT INSTRUMENT CONNECTION EQUALISING VALVE
INSTRUMENT
3.1 EQUALISE
1.25 ISOLATION
EQUALISE VENT
2.12 PROCESS
3.38
2.88 1/4" NPT VENT PORT
MAX.OPEN HEIGHT 8.58
ISOLATION
W WG GII C Ch he em miicca all IIn njje eccttiio on nK Kiitt
Designed for use on Wellheads for injection of Methanol.
Specifications Maximum Operating Pressure Limited to range of pressure gauge. Valves rated at 10,000 psi @ 100°F Connection(s) Main Valve (WMK-GI34) 1/2” NPT Check Valve (WMK-CV0608) 3/8” Compression Body & Bonnet Material 316 Stainless steel Stem Material 316 Stainless steel Stem Packing PTFE Teflon® Stem Non rotating Spring Material Inconel Cracking Pressure 7 PSI
WMK
Temperature Limits -40° to 500°F (-40°C to 260°C)
Dimensions & Part Numbers
- For pressure gauge dimensions see page 6 - For WN1334 dimensions see page 38
1 1/4" HEX A/F 1/2" NPT
0.50"
11/16" HEX A/F
'C'
Main Block # WMK-GI34
1 1/4" HEX A/F
B
3/8" OD SIZE
A 1.375"
Check Valve # WMK-CV0608
BALL DIA. 1/2"
2.375"
0.76"
1.5"
1/2"NPT BLEED 'L'
1.25"
Part Number WMK-64 WMK-72 WMK-74 WMK-76 WMK-82 WMK-90
Description Complete Kit, Pressure Range 0-600 PSI / KPA Complete Kit, Pressure Range 0-1000 PSI / KPA Complete Kit, Pressure Range 0-1500 PSI / KPA Complete Kit, Pressure Range 0-2000 PSI / KPA Complete Kit, Pressure Range 0-5000 PSI / KPA Complete Kit, Pressure Range 0-10,000 PSI / KPA
Please specify pressure range when ordering
B Be ellllo offrra am mT Ty yp pe e5 50 0F Fiilltte err R Re eg gu ulla atto orrss Marsh Bellofram’s type 50 regulator & type 50 NACE filter regulator are reliable precision units designed for instrumentation or general purpose use in both standard environments (Type 50), and corrosive environments (type 50 NACE). The type 50 NACE complies with NACE material requirement MR0-175 for sulfide stress cracking resistant metallic material for oil field equipment.
Specifications Sensitivity ± 1” water column Maximum Inlet Pressure (supply) 250 psig Output Pressure Ranges 0-30, 0-60 & 0-120 psig Flow Capacity T50 - 20 SCFM T50 NACE – 18 SCFM Port Size 1/4" NPT Temperature Limits T50 – 0 to 160°F (-18 to 71°C) T50 NACE - -20°F to 180°F (-29° to 82°C) Exhaust Capacity 0.1 to 0.45 SCFM Typical (2.8 to 12.7 LPM) Total Air Consumption @ Maximum Output 6 SCFH (2.8 LPM) Canadian Registration Number (CRN) CSA-OH1974.62
Dimensions & Part Numbers
Stocked Type 50 Filter Regulators Part Number
Output Range
962-275-000 962-275-100 962-275-200
0-30 psig 0-60 psig 0-120 psig
Stocked Type 50 NACE Regulators Part Number
Output Range
962-365-009 962-365-109 962-365-209
0-30 psig 0-60 psig 0-120 psig
T50 NACE
B Be ellG Ga ass P P0 03 39 9H Hiig gh hP Prre essssu urre eR Re eg gu ulla atto orrss The BelGas PO39 regulator selection is the largest of its type in the industry. BelGas offers this regulator in three different materials, one of which will ideally suit your application and your budget. The stainless unit conforms to NACE MRO-175
Specifications Inlet 1/4" NPT Outlet 1/4" NPT (3 Ports) Exhaust Port 1/8” NPT Maximum Inlet Pressure 5500 psig Outlet Ranges 0 to 30, 60, 120, 150, 225, 500 psig P039 Lineup
Weight 3 ¼ Lbs. Orifice Size 5/64” Temperature Limits -40° to 225°F (-40° to 107°C) Canadian Registration Number (CRN) CSA-OH1974.61
Dimensions & Part Numbers Brass Part Number P039020300111000 P03902120011100 P03902225011100
Spring Range 0 to 30 psig 0 to 120 psig 0 to 225 psig Nickel Plated
Part Number P039020300111001 P03902120011101 P03902225011101
Spring Range 0 to 30 psig 0 to 120 psig 0 to 225 psig Stainless Steel Part Number Range P03902120011102 0 to 120 psig P03902225011102 0 to 225 psig
Note: other materials and ranges available upon request
B Be ellllo offrra am mT Ty yp pe e1 15 50 00 0T Trra an nssd du ucce errss – – (((III///PPP ––– EEE///PPP))) The type 1500 transducer is an electro-pneumatic device that converts an analog electrical signal into a directly proportional output pressure. To operate, the unit requires a source of compressed air and an analog electrical control signal. It provides precision electro-pneumatic control to actuators, valves, positioners, final control elements and is ideally suited for high-flow control devices. The T-1500's compact size and accessibility to ports and adjustments allow the unit to be installed in small, space-constraint locations or in a manifold for multi-device control. The Type 1500 is also available in a zero-based slightly taller unit giving an even wider range of applications. The T-1500 transducer can be used as an electro-pneumatic control device to operate: valve actuators, valve positioners, h.v.a.c. systems, material handling systems, paper handling controls, automation systems, and liquid or gas processing systems. The type 1500 is available with or without approvals including; FM intrinsically safe, CSA approved, cenelec, ce, nema 4x depending on customer requirements and economy.
Specifications Hysteresis <0.75% of span Maximum Inlet Pressure (supply) 5 psi above maximum output up to 120 psig Output Pressure Ranges 3-15, 3-27 & 6-30 psig Input Signal 4-20 mA DC, 0-5 VDC, 1-5 VDC, 1-9 VDC, 0-10 VDC & 1-10 VDC Port Size 1/4" NPT Temperature Limits -20° to 150°F (-29 to 65°C) Exhaust Capacity 1.0 SCFM @ 5 psi
Type 1500
Total Air Consumption @ Maximum Output 3 SCFH @ 15 psi (2.8 LPM) Flow Capacity @ Mid Range 6.5 SCFM @ 15 psig, output pressure 120 psig
Dimensions & Part Numbers
Stocked Type 1500 Transducers Part Number
Input Signal
Output Range
966-710-000 966-712-000
4-20ma 4-20ma
3-15 psig 6-30 psig
B Be – (((III///PPP ––– EEE///PPP))) ellllo offrra am mT Ty yp pe e2 20 00 00 0X XP PT Trra an nssd du ucce errss – The Type 2000 Transducer is an electro-pneumatic device that converts an analog electrical signal into a directly proportional output pressure. To operate, the unit requires a source of compressed air or natural gas and an analog electrical control signal. The secret to the Type 2000's precise, reliable performance under a variety of demanding environmental conditions is a patent pending piezo-ceramic beam actuator. The Type 2000 has been designed to meet the electro-pneumatic control needs of the world with many features including; field-selectable inputs: directreverse-split ranging, and multiple input/output configurations. Mounting is versatile with precise reliable performance under extreme conditions of temperature, vibration, orientation, supply pressure changes, supply voltage changes, RFI/EMI, humid / oil-laden media, and corrosive surroundings. The Type 2000's precisely regulated pneumatic output can be used to operate; valve actuators, louver & damper actuators, valve positioners, air relays, clutch & brake controllers, and air cylinders. Explosion proof certification: certified to CSA standards class 1, division 1, groups c and d, T3. Exia 2B CI=0, Li=0, 24VDC, 25MA. meets the requirments for CSA class 1 division 1, group d gas use, including natural gas as the media flowing through the transducer
Specifications Accuracy ± 0.1% of full-scale output Selectable Inputs 4-20mA, 0-5, 1-5, 1-9, 1-10 or 0-10VDC Common Output Pressure Ranges 3-15, 3-27, 6-30 & 0-60 psig Connections 1/2" NPT or 20mm conduit, DIN Hirschmann (S model only) or external terminal block (S model only) Port Size 1/4" NPT, BSPT or BSPP Split Ranging Switch-selectable, full range or split range high or split range low Exhaust port Explosion proof only
Type 2000 Ex-Proof
Total Air Consumption 4 SCFH Maximum (1.9 LPM)
Explosion Proof
Vibration Effect <1% Full Scale (±/-1G; 5-1000Hz)
Dimensions & Part Numbers Stocked Type 2000 Transducers Part Number 2K-ENNG-42DF315-00 2K-ENNG-42DF630-00 2K-ENNG-42DF060-00
Input Signal 4-20mA 4-20mA 4-20mA
Output Range 3-15 psig 6-30 psig 0-60 psig
B Be ellllo offrra am mD Diia ap ph hrra ag gm mA Aiirr C Cy ylliin nd de errss Bellofram Diaphragm Air Cylinders are actuators made from elastomers and engineered metals and fabrics. The cylinders require no lubrication and are virtually frictionless, as well as being economically priced. They can be used to provide lifting, clamping, pushing, coining, turning and other linear force or actuation motions in many applications.
Specifications Types Double acting or spring return Stroke 1.8” to 6.0” Sizes 4 to 36 square inches Diaphragm Rolling diaphragm Supply Port Size 1/4" NPT, BSPT or BSPP Mounting Nose, universal, foot, cap flange, head flange, clevis bracket & clevis bracket stud Rod End Bellofram standard or National Fluid Power Association Temperature Limits -40° to 225°F (-40° to 107°C) 903-074-000
Dimensions & Part Numbers Part Number 915-105-000
Stocked Cylinders Spring Range 3-15 psi
Note: other sizes and ranges available upon request
T Trre orr erriicce e9 91 10 00 00 0X XT TT Te em mp pe erra attu urre eR Re eg gu ulla atto
The 91000XT Tank Thermostat is especially designed to control the temperature of heaters, treaters and separators within the Oil & Gas industry. It is entirely self-contained, requires no external power source, and is the most widely preferred unit of its kind.
Specifications Power Requirements Fully self-contained No external power required Housing Die cast aluminum, epoxy powder coated blue finish Set Point Scale Integral to housing Bellows High pressure brass, corrosion resistant, tin plated finish Adjustment Screw Brass Weight 10.3 Lbs. Port Size 1/2” 91000XT Valve Connection ¾” NPT or 1” NPT threaded ends Thermowell Steel, 1” NPT connection
Dimensions & Part Numbers How To Order Model 91000XT
Level of Assembly A
Ranges See below
C
Capillary Length 10
Thermowell 02 Steel Thermowell
20
Omit if none
Sample Part Number: 91000XTCX011002-X75
Standard Available Ranges Range Code
Nominal Range
Recommended Working Span
X13 X11 X04 X15 X01 X03 X12 X10 X16 X14 138-0156
5° to 115°F & 30° to 45°C 0° to 140°F & 25° to 60°C 110° to 140°F & 45° to 60°C 130° to 160°F & 50° to 70°C 110° to 190°F & 45° to 90°C 125° to 215°F & 55° to 100°C 200° to 280°F & 95° to 135°C 225° to 315°F & 110° to 155°C 310° to 365°F & 155° to 185°C 295° to 420°F & 145° to 215°C Thermowell for 91000XT
85° to 115°F & 30° to 45°C 110° to 140°F & 45° to 60°C 110° to 140°F & 45° to 60°C 130° to 160°F & 50° to 70°C 160° to 190°F & 70° to 90°C 180° to 210°F & 80° to 100°C 250° to 280°F & 120° to 140°C 280° to 310°F & 135° to 155°C 310° to 365°F & 155° to 185°C 360° to 420°F & 180° to 215°C N/A
Bulb Length
8” 8” 8” 8” 8” 8” 8” 8” 8” 8” 8.38”
Valve Size X75 ¾” NPT X10 1 NPT Omit if Actuator only
Warehouses WGI – Head Office / Warehouse Bay 1+2, 4045 – 74 Ave S.E. Calgary, AB T2C 2H9 Ph: (403) 236-4888 Fax: (403) 236-7629 Email: sales@wgiltd.com
WGI – Branch Office / Warehouse 6624 – 50 Street Edmonton, AB T6B 2N7 Ph: (780) 463-3800 Fax: (780) 463-3990 Email: edm@wgiltd.com
www.wgiltd.com
Your local WGI distributor