Course Descriptions perience. This course may be repeated if topics and learning outcomes vary EECT-2303 Teleconferencing Systems Design (2-4-3) An intermediate study of teleconferencing formats and criteria for optimum application for applicable presentation materials; performance assessment of site surveys; physical layout design; determination of teleconferencing needs and platform requirements, costs, and hardware options. EECT-2330 Telecommunications Switching (1-6-3) The operation of telecommunications switching equipment and related software. Topics include installation, testing, maintenance, and troubleshooting. Prerequisites: EECT-1342 EECT-2337 Wireless Telephony Systems (2-4-3) principles of wireless/cellular telephony systems to include call processing, hand-off, site analysis, antenna radiation patterns, commonly used test/maintenance equipment and access protocol. Prerequisites: CSIR-1341 EECT-2375 AC/DC Motor Circuit Design (1-8-3) A comprehensive treatment on the theory and fundamentals of magnetic circuits, transformers, ac/dc electrical motors, electronic timer circuits. Thristor power controls, voltage to frequency converters, proportional integral control circuits, automatic control circuits and safety techniques for motor control circuits are emphasized. Prerequisites: IEIR-1304, CETT-1305, CETT-1409 or CSIR-2301 EECT-2380 Cooperative Education 10 (1-19-3) Career related activities encountered in the student’s area of specialization are offered through a cooperative agreement between the college, employer, and student. Under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. This course may be repeated if topics and learning outcomes vary. EECT-2580 Cooperative Education 11 (1-39-5) Career related activities encountered in the student’s area of specialization are offered through a cooperative agreement between the college, employer, and student. Under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. This course may be repeated if topics and learning outcomes vary. EECT-2581 Coop/Education Environmental Technology (1-39-5) Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. EECT-2680 Cooperative Education 12 (1-39-6) An intermediate or advanced course with lecture and work-based instruction that helps students gain practical experience in the discipline, enhance skills, and integrate knowledge. Indirect supervision is provided by the work supervisor while the lecture is provided by the college faculty or by other individuals under the supervision of the educational institution. Cooperative education may be a paid or unpaid learning experience.
Texas State Technical College
| 191
EEIR- Electrical/Electronic Installation & Repair EEIR-1307 Introductory Security Systems (2-4-3) A study of the security system components, maintenance, troubleshooting, and repair procedures. Emphasis on the installation of security systems as directed. EEIR-1309 National Electrical Code (1-6-3) Interpretation of the National Electrical Code for residential, commercial and industrial wiring. Emphasis on designing, constructing, and troubleshooting electrical systems. Prerequisites: IEIR-1302 CETT1303 or IEIR-1304
EGRT- Engineering Materials EGRT-1305 Engineering Materials (2-3-3) Instruction in the making and forming of steel and the classification of steel, cast iron, and aluminum. Topics include mechanical and physical properties, non-destructive testing principles of alloying, selection of metals, iron carbon diagrams, principles of hardening and tempering steel, and the metallurgical aspects of machining.
ELPT- Electrical Power Transmission ELPT-1215 Electrical Calculations I (1-3-2) introduction to mathematical applications utilized to solve problems in the electrical field. Topics include fractions, decimals, percentages, simple equations, ratio and proportion unit conversions, and applied geometry. Prerequisites: DMTH-0050, DMTH-0100, DMTH0200 ELPT-1221 Introduction to Electrical Safety and Tools (1-4-2) A comprehensive overview of safety rules and regulations and the selection, inspection, use, and maintenance of common tools for electricians. ELPT-1225 National Electrical Code I (0-4-2) An introductory study of the national electric code (NEC) for those employed in fields requiring knowledge of the code. Emphasis on wiring design, protection, methods, and materials; equipment for general use; and basic calculations. ELPT-1280 Cooperative Education - Electrical and Power Transmission Installation/ Installer, General (1-9-2) Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. ELPT-1311 Basic Electrical Theory (1-8-3) An Overview of the Theory and Practice of Electrical Circuits Including Calculations As Applied to Alternating and Direct Current. Prerequisites: ELPT-1215, DMTH-0050, ELPT-1315 Electrical Calculations I (3-0-3) introduction to mathematical applications utilized to solve problems in the electrical field. Topics include fractions, decimals, percentages, simple equations, ratio and proportion unit conversions, and applied geometry.
www.waco.tstc.edu | 254.799.3611