School Bus Lighting Safety Guide

Page 1

VXINDUSTRIAL.COM

SCHOOL BUS SAFETY

LED LIGHTING SOLUTIONS LED LIGHTING SOLUTIONS


EFFECTIVE LIGHTING: CRUCIAL FOR SAFETY Many school districts are upgrading their buses with strobe beacons to increase visibility of the bus, but what about upgrading the path that children walk to get on and off the school bus? Over 100 fatalities each year are related to school bus transportation. Children are most at risk of an injury while stepping on or exiting the bus and crossing the street in front of the bus, especially on dark mornings in rural areas. With improved lighting, on-coming traffic can quickly spot pedestrians and children can see the stairs and the curb as they load and unload the bus each day.

BENEFITS OF VISION X LED LIGHTING • • • • • •

Maintenance Free Operation Pulse Width Modulation Reverse Polarity Protection Electronic Thermal Management Top Binned LEDs High Efficacy

WSL SERIES JUNIOR: SURFACE MOUNT

The WSL Junior is an easy install on the left side of the school bus providing enough illumination so kids can be seen by oncoming traffic while crossing the street in front of the bus.

SCHOOL BUS SAFETY

Raw Lumens: 5,000 lm

Amp Draw (@12V): 3.33A

Effective Lumens: 3,125 lm

Input Voltage: 9-32V DC

Wattage: 40W

Dimensions: 7.40” x 5.04” x 1.54”

FEATURE

BENEFIT

Widespread Precision Optics

Distinct cut off area of light to prevent wasted or stray light in the eyes of pedestrians or other drivers.

High Output

Improves visibility of children crossing in inclement weather or dark mornings and evenings.

IP-68 | IP69K Rating

This fixture is waterproof and will withstand high water pressure.


VX HEADLIGHT SERIES: 4” X 6” OR 7” ROUND

The Vision X Headlight Series dramatically boosts the total light output. Available in multiple sizes as a direct replacement, the LED headlight is able to push the light from the high beam LEDs to surprising distances, where as the reflector for the low beam LED was engineered to produce a wide beam pattern to cover entire roadway. 4” x 6”

Raw Lumens: 4,210 lm Each

Amp Draw (@12V): 2.08A

Effective Lumens: 2,947 lm Each Input Voltage: 9-32V DC Wattage: 25W 7” Round

Dimensions: 6.57” x 3.94” x 3.29”

Raw Lumens: 4,210 Each

Amp Draw (@12V): 3.58A

Effective Lumens: 2,947 Each

Input Voltage: 9-32V DC

Wattage: 43W

Dimensions: 6.96” x 6.96” x 3.86”

FEATURE

BENEFIT

DOT Compliant

Certified to not blind oncoming traffic eliminating the risk of any liability.

GORE Polyvent Valve

Reduces the possibility of moisture inside the light increasing longevity.

IP-68 Rating

This fixture is waterproof.

DURALUX SERIES: OVER DOOR LIGHT

The Dura 6 mounts directly above the school bus door illuminating the stepwell enabling students to see where to step to prevent falls creating a safe and easy load and unload! Raw Lumens: 3,696 lm

Amp Draw (@12V): 2.5A

Effective Lumens: 2,590 lm

Input Voltage: 11-65V DC

Wattage: 30W

Dimensions: 5.38” x 4.19” x 2.72”

FEATURE

BENEFIT

Die-Cast Aluminum Housing

Enhanced durability minimizing downtime and reducing maintenance costs.

5000K Color Temperature

Simulates day time color

IP-68 | IP69K Rating

This fixture is waterproof and will withstand high water pressure.

LED LIGHTING SOLUTIONS


PHOTOMETRIC REPORT

SCHOOL BUS SAFETY


LED LIGHTING SOLUTIONS


PHOTOMETRIC REPORT LUX READING Lumens: Total amount of light produced at the source. Lux (Foot Candles): Measured light at any given point.

SCHOOL BUS SAFETY


HOW CAN YOU TELL IF YOUR LIGHT IS DOT COMPLIANT? For a light fixture to be DOT Compliant it must have SAE and DOT identification code markings. These markings indicate the fixture meets NHTSA standards under lighting and performance requirements. (See Below) DOT Department of Transportation

SAE Society of Automotive Engineers NHTSA National Highway Traffic Safety Administration FMVSS 108 Federal Motor Vehicle Safety Standard No. 108 published by NHTSA.

DOT LOW BEAM

ANGLED OPTIC - FILL IN BETWEEN BUMPER AND BOTTOM OF LOW BEAM

AIMING PADS / MARKS

CONICAL HIGH BEAM

FMVSS108 REQUIRED MARKINGS HALO / PARK RING

Vision X 4x6 headlights are DOT Compliant for use in all areas regulated by FMVSS108.

LED LIGHTING SOLUTIONS


VISION X USA 1601 Boundary Blvd Auburn WA 98001 United States of America 253-218-2900

VISION X ASIA 23-7 Dongtansandan 9-gil Dongtan-myeon Hwaseong-si Gyeonggi-do 18487, Korea P: 82-32-515-4814

P: 888-489-9820 www.vxindustrial.com Copyright © 2018 Vision X Lighting


Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.