Services Drawing

Reception Area Experience Pods Display Pedestals

Lens Display Passage

Reception

Digital Render of the Reception Table

1mm acrylic laminate cladded on 12mm thick flexi ply

12mm thick flexi ply screwed to 3mm thick 50*50mm ms box section

12mm thick plywood sandwitched between 1mm thick acrylic laminate

1mm laminate cladded on 12mm thick flexiply 12mm thick flexiply screwed to 3mm thick 50*50mm MS box section 1mm acrylic laminate cladded on 12mm thick plywood

3mm thick MS sheet

3mm thick rod welding to both the MS sheets holding the 25mm thick block board sandwitched between 1mm thick acrylic laminates

CNC cut in Plywood in Profile

Base Plate

5mm thick MS Plate

Main gear to Rotate the Fins

3mm thick MS Plate

Arms that connect the Main Gear and Fins 3mm thick MS Plate

Fins

3mm thick MS Plate

Front Elevation when the Aperture is opened

2mm thick MS laser cut sheet

10mm deep CNC cut in 12mm thick HDF

3mm thick MS laser cut sheet.

3mm thick 25*25mm MS bracket welded to MS coloumn and screwd to 25mm thick HDF

Layered Exploded View of Partition

Gear connected with motor to rorate the base plate

Front Elevation when the Aperture is closed

30mm thcik MS shaft to put the arm at its place to rotate the flap

3mm thick laser cut MS sheet connecting the base plate and the flap. A 30mm thcik MS shaft to put the arm at its place to rotate the flap

3mm thick laser cut MS sheet (base plate screwed to HDF)

Guided by: Jinal Shah

Situated in the core of Ahmedabad city, Sabarmati Riverfront is an extensively used public infrastructure. The project focuses upon understanding the existing infrastructure and exploring potential possibilities for intervention, based upon the needs of the user group. Considering the monotonous long stretch of cycle track, it was evident that the existing infrastructure for halt and refreshments was not sufficient. The project focuses upon conceptualising and designing intermediate refreshment kiosks and stalls which would cater as both, serving stalls and sitting spaces. The design output is a stall which can be deployed and converted into sitting spaces. The sitting is put around the tree-planters to naturally shade the intervention. The users can get a comfortable sitting space in the closed position of the structure, whereas in the deployed state, when it becomes a stall, the height increases and space becomes sufficient to cater to the purpose of selling.

ANGLED STRIP -1

Strip

OBSERVATION

1. When the angle of strip is obtuse it results in radial configuration that is circle.

2. The module comes together to form a complete polygon, in order to get the angle of the strip the number of modules is required. Let n be the number of pieces, then 360/n=x, hence 180-x gives the angle. for eg; n=14, then x=25, therefore the angle of the strip is 155 degrees.

1. When the angle of strip is obtuse it results in radial configuration that is circle.

2. The module comes together to form a complete polygon, in order to get the angle of the strip the number of modules is required. Let n be the number of pieces, then 360/n=x, hence 180-x gives the angle. for eg; if n=14, then x=25, therefore the angle of the strip is 135 degrees

3. The ratio of radii in the closed to open configuration is 1:5.

4. The point of force is at the opposite ends of the arc which acts along the curvature.

20mm thick Birch Ply cladded with 3mm thick Lemon Wood veneer

25mm*25mm*3mm thick MS L-section Finished with matte black powder coat welded with the and finished with matte Black powder coat

78mm OD MS Thrust Bearing

3mm thick Perforated MS plate welded with the L-section and finished with matte Black powder coat 20mm thick Birch Ply plank cladded with 3mm Lemon wood veneer

12mm thick Birch Ply

8mm thick MS Plate finished with matte Black powder coated 25mm*25mm*3mm thick MS C-section Finished with matte Black powder coat 45mm wide Electro welded steel bracket with polyurethane wheels and locking system

8mm thick MS Plate finished with matte Black powder coated

100m*60mm*3mm thick MS C- channel finished with matte black powder coate

Typology: Co - Curricular

Ancillary works include the works have done in and after my bachelor’s at CEPT University.

They include, few collaborations, lighting installations, workshops, volunteership, competitions, freelancing and last but not the least, the hobbie which has turned into my passion - ‘Photography’

This is a proposal for a temple amidst the lush greens of Western Ghats. All that the place carried was people’s faith and a history which had to be accommodated in a new structure. This was to be a new beginning on the pristine land. Hence INCEPTION.

A “beginning” to manicure a small bit of the wilderness, in a way to make it belong to the faith of people. With an ambitious plan set for the context, the design is dealt with utmost caution in terms of material, climate and nature. The site poses itself as an inspiration to the ideation of this temple and elements on the site such as the tree, stream, forest and mountain serve as guidelines. This makes the temple focus not just on the beauty in the sanctum, but also to the surrounding, deciphering faith both ways.

29th Foundation Day Lamp : Conceptualization of this platonic solid undergoes into understanding of tensegrity. Taking combination of compression and tension members , the MS pipes and Cables generates holistic form of an Icosahedron.

It is a rigorous effort of constructing a lamp of 24 edges and 12 vertices. It generates aesthetically functional detailed junctions using various material like MS pipe, MS rods, Cables, Wood, copper sheets, brass rods, etc.

The festival of Navratri is all about dance, music and motion. There is a sense of dynamism in it. The power grid is based on the concept of dynamism - Fluidity that one sees when one stands and sees the installation from different positions. The project was done by a team of 12 students, where I was one of lead member.

In light of this straightforward thought power matrix made of 4 boards each by 4ft by 4ft. The size of PVC pipes lessens on a level plane and vertically by 2.7cm while slantingly it was an alternate figuring. The base was of MDF (12mm). The lighting was LED strips lights which were later supplanted by arrangement light due to being all the more simple to deal with and safe. The channels had patterns to let the light turn out and closes were shut by utilizing translucent acrylic to shroud the wellspring of light.

These 4 boards were consolidated with stray pieces and afterward a solid metal casing was made with MS box segment accessible out of the tackboards stands and welded in the workshop. The 4 panels were independently associated with the casing and group the establishment was held tight a divider with links.

These 4 panels were CNC cut alongside the openings for embeddings pipes. The entire thought was to allow the establishment to serve, something other than a lighting component. The component fills in as a board worth taking a gander at even without the nearness of light while utilizing the light features the progression of the point network.