Part 1 Network solution
■ Installation Process 1. Open the case
CON_COMM
CN_COMM
1 2 3 4
Relay OUT
Do Kit
CN_POWER
CN_POWER
2. Wiring RS485 Line & Address Setting, Dip Switch Setting
CN_COMM
012
Indoor No (SW-LOW)
Indoor unit No
56 34 7
F
Group No (SW-HIGH)
89AB
F
56 34 7
89AB
3
012
Ex) For setting "3F" CDEF
1 2 3 4
Group No
CDE
CN_POWER
• No. 1 S/W ON • No. 1 S/W OFF • No. 2 S/W • No. 3 S/W ON
ON 1
2
3
4
• No. 3 S/W OFF • No. 4 S/W
: The initial relay is turned on when the power is applied to the contact PI-485 : The initial relay is turned off when the power is applied to the contact PI-485 : Set to OFF : The 3-minute delay is disabled when the relay is turned on/off. : The 3-minute delay is enabled when the relay is turned on/off. : Set to ON Network solution
Accessories
55