>> PCGU1000 2MHz USB FUNCTION GENERATOR
>> PCSGU250 USB-PC SCOPE + GENERATOR (2CH.)
Convert your computer into a feature-packed function generator. Outputs are galvanically isolated from computer.
A complete USB-powered lab-in-a-box
Comes with PC software and a DLL for your own developments, and a worldwide PSU. • amplitude range: 100mVpp to 10Vpp @ 1KHz// 600ohm load / 0V offset • frequency setting resolution: 0.01% • With internal 40 dB attenuator (output divided by 100) • direct digital wave synthesis (DDS), stores up to 8192 of waveform points • amplitude resolution: 0.4% of full scale • offset: from 0 to -5V or +5V max. (resolution 0.4% of full scale) • vertical resolution: 8 bits (0.4% of full scale) • sample rate: 50MHz • typical sine wave distortion (THD): < 0.08% • output impedance: 2 x 50ohm • power supply: standard 9V DC adapter, 600mA (included)
Feature-packed PcLab2000-LT software for two channel oscilloscope, spectrum analyser, recorder, function generator and bode plotter. With the generator, you can create your own waveforms using the integrated signal wave editor. For automated measurements, it is even possible to generate wave sequences, using file or computer RS232 input.
FUNCTION GENERATOR
2x
>> PCSU1000 2-CHANNEL USB PC OSCILLOSCOPE Use the power of your PC to visualize electrical signals. Its high sensitive display resolution, down to 0.15mV, combined with a high bandwidth and a sampling frequency of up to 1GHz offer all the power you need. • general information: • inputs: 2 channels, 1 external trigger input • input impedance: 1 Mohm / 30pF • bandwidth: DC to 60 MHz ±3dB • maximum input voltage: 30V (AC + DC) • input coupling: DC, AC and GND • Supply from USB port (500mA)
FUNCTION GENERATOR
BODE PLOTTER
WAVE EDITOR
TRANSIENT RECORDER
OSCILLOSCOPE
TRANSIENT RECORDER
SPECTRUM ANALYZER WAVE SEQUENCE
WAVE SEQUENCE
41