UK Install snow sensor into the ground surface
4. Apply the concrete/asphalt.
The following illustrations show how to install the snow sensor into the ground surface. 1. Create a notch for the cable conduit (maximum diameter of 23 mm). It is recommended to use a cable conduit equipped with a cord, in order to make it easier to pull the cable through when installed.
CZ DE DK EE
5. Remove the wood plug when the concrete/asphalt has cured.
ES m
3m
FI
≤2
FR
2. Insert the sensor tube in the hole where the sensor is to be installed. Make sure it is securely embedded in relation to the expected surface load.
HR
6. Ensure that the sunsor tube is clean.
HU IT LT 3. Insert the supplied wood plug into the sensor tube before applying the concrete/asphalt.
LV NL
7. Insert the sensor cable and route it into the cable conduit. Ensure that the cable is not damaged on any sharp edges.
NO PL PT RO RU SE SK 22
U P O N O R S M AT R I X M O V E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L