REPLACEMENT
SEAT MOTORS AND GEARS
Forward/Backward Adjustment
Forward/Backward Adjustment
Forward/Backward Adjustment
$65.00
Center Console Cupholders I
cupholders
‘13-‘23 CUP-HOLDER-DBL: $49.95
Automatic transmission only.
‘03-‘12 CUP-HOLDER-03: $49.95 (Does not fit trucks with Captain’s chairs and the big factory center console.)
‘98-‘02 CUP-HOLDER-9802: $49.95
‘94-‘97 CUP-HOLDER-9497: $49.95
Increase the storage capacity of the center console and help avoid messy liquid spills in the interior of your truck with our handy cup holder. Installs in minutes to the existing console.
The Cupholder is form fitted to the inside diameters of the console and is designed so that it does not interfere with shifting in manual transmission trucks.
Cup wells are 4” deep. Upper diameter: 3-3/4”. Lower diameter: 2-3/4”. The cup wells have a slot for a coffee mug handle.
Use a single self-tapping screw or velcro (included with the cup holder) to install the cup holder. The Cupholder attaches to the inside of the console. Some minor adjustments might be necessary to the console to get the lid to close properly.
Installation instructions are included.
Forward/Backward Adjustment
All factory gear cases, thrust washers and roll pins must be reused.
Up/Down Adjustment (FRONT)
Must reuse factory tube nut, gear shims and thrust washers.
Up/Down Adjustment (REAR)
Must reuse factory tube nut, gear shims and thrust washers.
$115.00
‘94-‘97, 1500/2500/3500
Forward/Backward Adjustment
Must
$115.00
Up/Down Adjustment
Must reuse factory tube nut, gear shims and thrust washers.
Door Pocket Drink Holder (‘09-‘23)
DRIVER SIDE - ‘10-‘23 2500/3500, ‘09-‘18 1500, ‘19-‘23 1500 Classic 1LD23XXX-AA: $43.95
PASSENGER SIDE - ‘10-‘23 2500/3500, ‘09-‘18 1500, ‘19-‘23 1500 Classic 5NN24XXX-AA: $17.95
DRIVER SIDE - ‘19-‘23, 1500 Does not fit 1500 Classic 5YK47TX7AC: $17.50
PASSENGER SIDE - ‘19-‘23, 1500 Does not fit 1500 Classic 5YK46TX7AC: $23.75
SEAT-DOD5GS: $59.00
Does your truck have this spiffy foam rubber insert in the truck’s sidedoor pocket? If it doesn’t,get this one by Mopar to hold your things.
Cup Holder (‘98-‘02)
MIST GRAY 5FR421C8AE: $181.95
Replacement cup holder for Ram 2500/3500 trucks with an automatic transmission. Color code RC3.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 6 Ram Turbo Diesel Parts & Accessories #121 SEAT COMPONENTS & CUPHOLDERS SEAT MOTORS ‘03-‘09,
2500/3500 | ‘06-‘08, 1500 MEGA CAB | ‘02-‘05 1500
SEAT-DOD4:
FRONT SEAT-DOD1:
REAR SEAT-DOD2:
‘98-‘02,
Motor
SEAT-DOD6:
$65.00 Up/Down Adjustment
$91.00
$88.00
2500/3500 & ‘98-‘01, 1500 Up/Down Adjustment
Conversion Kit
$91.00
Motor
SEAT-DOD16:
Conversion Kit
$118.00 ‘94-‘97, 1500/2500/3500
SEAT-DOD3:
Up/Down
SEAT-DOD5:
PARTS ‘03-‘09,
Adjustment
$83.00 MOTOR GEAR KITS &
2500/3500 | ‘06-‘08, 1500 MEGA CAB | ‘02-‘05 1500
SEAT-DOD14:
SEAT-DOD1GS:
$59.00
SEAT-DOD2GS:
$59.00
Motor Tube Nut SEAT-3GENTNUT:
Up/Down Power Seat Adjustment
$51.00
SEAT-DOD13:
reuse factory tube nut, gear shims and thrust washers.
‘13-‘23
‘Double Cup’ Cupholder
This cupholder will only work with the console pictured!
‘03-‘12
‘98-‘02
‘13-‘23 Automatic ‘94-‘97
Elbow Friend
STANDARD SIZE (8.5”L x 3W” ) JUMB0 SIZE (10”L x 3W” )
ELBOWFRIEND-STD: $21.99/pair ELBOWFRIEND-JMB: $29.99/pair
Here is the problem: you have a truck with the same ‘ole hard plastic door panel and it’s uncomfortable as an arm rest.
Here is the quick, easy and affordable answer: Elbow Friend. It is a comfortable pillow covered with durable fabric. We found the standard size to work well for most people, but a jumbo size is available too.
SHIFT KNOB & PARTS
SHIFT KNOB, ‘89-‘18
52104174: $34.95
RETAINING NUT 6502556: $7.95
6-SPD INSERT - G56, ‘05-‘18
55366060AB: $7.95
BILLET ALUMINUM SHIFT KNOB INSERT - NV5600 SHIFTERS
5-SPD INSERT - NV4500, ‘89-‘04
4446921: $6.95
Custom ‘CUMMINS’ Shift Knobs (‘89-‘18)
Any of these custom CUMMINS shift knobs will do an outstanding job of dressing up your truck’s interior. They fit both the transmission and/or the transfer case shifter. The shift knobs measure 2” round (the approximate size of a cue ball), a comfortable size for your hand. Threaded insert is M10 x 1.5mm.
‘CUMMINS C’
SHIFT_C_RED: $49.95
SHIFT_C_BLACK: $49.95
SHIFT_C_SILVER: $49.95
‘Cummins C Power’
SHIFT_KN_R (RED): $49.95
SHIFT_KN_S (SILVER): $49.95
SHIFT_KN_B (BLACK): $49.95
‘CUMMINS Dependable DIESEL’
SHIFT_RETRO1_RED: $49.95
SHIFT_RETRO2_BLACK: $49.95
SHIFT_RETRO3_SILVER: $49.95
CENTER CONSOLE LID KIT (‘03-‘05)
GRAY DRM924876: $269.95
TAUPE DRM924877: $199.95
Restore functionality of your Dodge Ram’s center console lid with a Center Console Kit. Includes all the materials and hardware needed to complete the repair.
Replacement
A-Pillars (‘03-‘09)
DRIVER SIDE
MOP-1TE75BD1AA: $64.95
PASSENGER SIDE $64.95
A-pillar with this replacement. It is color-matched and does not require painting.
Replacement
A-PillarS (‘03-‘09)
DRIVER SIDE
DRM97631: $53.95
PASSENGER SIDE
DRM97630: $49.95
Easy to install and durable, offering an exact fit that matches the original handle.
Replacement A-pillars have reinforced mounting holes. Will not work with IMCO repair kits.
A-Pillar Grab Handle Repair Kit, (‘03-‘09)
DRIVER AND PASSENGER SIDE
IMCO_RPR_KIT: $46.00
DRIVER SIDE ONLY
IMCO_RPR_SINGLE: $25.00
The OEM A-pillar grab handle in ‘03-‘09 Ram trucks is a known weak spot in the interior. Put too much weight on it and the mounting points will break.
This Grab Handle Repair Kit has aluminum bushings that reinforce the mounting points to help prevent the grab handle from breaking or to repair one that is already broken.
NOTE: This repair kit will only work if the mounting base is split or if the base is completely broken off of the A-pillar.
NOTE: Will not work with new replacement A-pillars.
Order 770-886-2500 or genosgarage.com 7 Product prices subject to change without notice. INTERIOR PARTS & ACCESSORIES
Available in Black color only.
‘98-‘05 GG-NV5600SI: $14.95
Works great on the center console too.
BEST SELLER!
AFTERMARKET Replacement
Dashboard (‘98-‘02, 3500/2500/1500)
‘9 8 -‘02, 3500/2500 & ‘9 8 -‘01, 1500 DRD8-2: $259.95
($50 flat shipping fee to continental U.S.)
Lifetime warranty from manufacturer defects. Made in the USA.
This is a full replacement dashboard. This is not a cover. It is made with a heavy-duty ABS plastic that is designed to help keep the sun from making it crack like the original dashboard. This Dodge Ram dash is more durable than the OEM part. The dash cover is only available in black and we recommend that you paint it to match the interior color in your truck.
The ‘98-‘02 dashboard is made for us to our specifications and are typically in stock here at our warehouse.
The dashboards may require some light trimming to fit. It is not a job for a novice, but is one that goes hand-in-hand with a heater core/ evaporator replacement. See Evaporator and service kits on page 50. Please call before ordering this replacement dash if you have installation questions.
Replacement DashboardS (‘94-‘05, 2500/3500)
*Oversize shipping rates apply to replacement dashboards.
‘94-‘97
Available in Black only. Can be custom-painted to match truck interior color. See page 9.
Rigid Plastic Dashtop Cover (‘94-‘05, 3500/2500/1500)
‘03-‘05, 2500/3500 ‘9 8 -‘02, 2500/3500 ‘9 4 -‘97, 2500/1500 ‘02-‘05, 1500 ‘9 8 -‘01, 1500
DASHTOP-997: $189.00
SLATE GRAY ( DV ) DRD3-MOP-FRONT-SL: $380.00
TAUPE ( L5 ) DRD3-MOP-FRONT-TP: $380.00
$40 shipping fee on ‘02-‘05 upper front dashtops.
UPPER FRONT AND REAR DASHTOP
SLATE GRAY ( DV ) DRD3-MOP-SL-KIT: $979.00
TAUPE ( L5 ) DRD3-MOP-TP-KIT: $979.00
$60 shipping fee on ‘02-‘05 dashboard kits.
‘98-‘02, 2500/3500 DASHBOARDS
Also fits ‘98-‘01, 1500.
LIGHT MIST GRAY ( RC8) DRD8-MOP-MGREY: $ 480.00 $50 shipping fee on ‘98-‘02 dashboards.
‘94-‘97, 1500/2500/3500 DASHBOARD
SLATE GRAY ( DV ) DRD4-7-MOP: $350.00
$50 shipping fee on ‘94-97 dashboards.
NOTE: The dashboards may require some light trimming to fit. It is not a job for a novice, but is one that goes hand-in-hand with a heater core replacement or service. See pages 50-52 for Evaporators, Heater Cores and Service Kits.
Please call before ordering a replacement dash if you have installation questions.
DASHTOP-999: $189.00 DASHTOP-998: $189.00
From time to time, we get calls from truck owners looking for an affordable, high-quality dash replacement or cover to hide those unsightly cracks that inevitably occur in extreme weather conditions. When Palco Industries, Inc. approached us with their new line of DashTop dash covers for ‘94-‘05 Dodge Ram trucks, we ordered one and installed it on one of our trucks. We were pleased to find that the installation was easy, the fit was good, and the cost was reasonable. Silicone adhesive is included.
Additional shipping charges apply to dashtop systems shipping to Alaska and Hawaii.
‘03-‘05, 2500/3500 & ‘02-‘05, 1500 SLATE GRAY ONLY. DRM926121: $138.95
$40 flat shipping fee applies for dashboard panel.
This replacement dash cover matches the fit and finish of the original part, restoring a like-new appearance to your truck’s dashboard. Can be painted to match different interior color.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 8 Ram Turbo Diesel Parts & Accessories #121 DASH KITS & COVERS
‘03-‘05
H TDR82, p14-19: Replacing Your Cracked Dash, ‘98.5-‘02
Dash available in Black only. Can be custom-painted to match truck interior color. See page 47.
‘03-‘05
‘98-‘02
‘94-‘97
UPPER FRONT Dashboard PANEL (‘03-‘05)
MOPAR Instrument Cluster Bezel
‘99-‘02, 2500/3500 & ‘99-‘01, 1500
68042746AC : $279.00
This OEM instrument cluster bezel replaces your broken cover perfectly.
NOTE: New mounting clips #06504067 below or re-use the original clips.
Instrument Cluster Bezel
‘99-‘02, 2500/3500 & ‘99-‘01, 1500
DRM926469: $89.95
This lower cost instrument cluster bezel replaces the OEM cover perfectly.
NOTE: 13 mounting clips included.
Instrument Cluster Bezel
Mounting Clip (‘98-‘02) 13 clips required.
06504067: $2.95 each
Instrument Cluster Bezel
RETAINER KIT (‘98-‘02)
Includes 13 clips.
DRM926287: $15.95
Instrument Cluster Air Outlets, ‘98-‘02 LEFT 5014842: $49.95
CENTER - LEFT 5014841: $50.95
CENTER - RIGHT 5014840: $54.95
TEMPERATURE Control Knob ASSORTMENT (‘94-‘97)
DRM76829: $11.95
Dashboard Reinforcement
Tabs (‘94-‘02)
‘98-‘02, 2500/3500 ‘94-‘97, 2500/3500
‘98-‘01, 1500 GG-DRK9497: $12.95
GG-DRK9802: $12.95
Modern dashboards are made from plastic which becomes brittle and fatigued over time. Decrease dash rattles and increase structural rigidity with these reinforcement tabs. Reinforcement tabs only work with OEM dash.
rattle & squeak eliminator kit
Replacement Dash Panel Plastic Snap-in Nut (‘94-‘09)
4 required per dash.
06504485: $9.95 each
The Geno’s Garage Rattle & Squeak Eliminator Kit is made up of a 1/2” x 24” piece of adhesive backed felt. Manufacturers use the material to perform the same task.
Includes 24” of felt and (2) alcohol prep pads.
GG-RSEK: $5.95 each
Dash MATS
Looking for a dash cover to protect your dashboard from the summer heat? Whether it is an ULTIMAT Dash Mat or a DASHMAT Carpet Dash Mat , this is the answer to the hot sun. The texture of the dash cover allows you to store items on top of the dash and not worry about them rolling around.
Your choice of colors:
The ULTIMAT DASH COVER is a semi-rigid carpet cover molded to the exact shape of the dashboard, resulting in a perfect fitting cover.
ULTIMAT Dash Covers: $78.99
Specify Black or Gray when ordering.
ULTIMAT Dash Cover
‘10-‘18
Fits 2019 1500 Classic Black, Gray ULT9184000
‘10-‘18
w/Alpine speakers Black, Gray ULT9184001
‘06-‘09 Black, Gray ULT9170100
‘03-‘05 Black, Gray ULT9154100
‘98-‘02 Black, Gray ULT9088600
‘94-‘97 Black, Gray ULT9053100
‘81-‘93 Black, Gray ULT9055600
We tried all four colors of the UltiMat and DashMat. We strongly suggest the black dash cover as it does not glare into the windshield.
The DASHMAT DASH COVER is a flexible poly-carpet, stitched cover that is cut to follow the contour of the dash.
DASHMAT Dash Cover: $49.99
Specify Black, Caramel, Beige, Smoke or Gray when ordering.
DASHMAT Dash Cover
‘19-‘23, 2500/3500 Black, Caramel, Smoke DM226500
‘10-‘18
Fits ‘19 Ram 1500 Classic Black, Gray DM184000
‘06-‘09
‘03-‘05
‘98-‘02
Black, Gray DM170100
Black, Gray DM154100
Black, Beige, Gray DM088600
‘94-‘97 Black, Beige, Gray DM053100
‘81-‘93 Black, Beige, Gray DM055600
NOTE: ‘10-‘23 DashMat doesn’t have speaker cutouts for Alpine stereo system.
Order 770-886-2500 or genosgarage.com 9 Product prices subject to change without notice.
DASH
COVERS
KITS &
Included with DRD8-2 dash at no extra charge.
Black Beige Caramel Smoke Gray
6.7L EGR Cleaning KitS
‘07.5-‘22, 6.7L ‘07.5-‘22, 6.7L ‘13-‘18, Cab/Chassis with Crankcase Vent Filter without Crankcase Vent Filter EGR3-A (Filter): $168.00
EGRKIT-1: $159.00 EGRKIT-2: $55.50 EGR3-B (without Filter): $64.50 Using your trusty Owner’s Manual you may have noted that changing-out the crankcase vent filter (CCV) is a required service at the 67,500 mile interval. Further, for those 2007.5-2012, 2500/3500 pickup truck owners [the non-diesel exhaust fluid (DEF) style aftertreatment] there is also a “clean the exhaust gas recirculation (EGR) valve and cooler service” required. The ‘07.5-Current Cab and Chassis trucks and ‘13-Current 2500/3500 use the DEF exhaust aftertreatment. Looking closely at their Owner’s Manuals reveals that a CCV filter change is also required at 67,500 miles, However, the cleaning of the EGR valve and EGR cooler is not a requirement. We asked the folks at Cummins and they responded that you may wish to include the cleaning, but it is typically not needed until the second crankcase vent filter change at 135,000 miles. They did suggest an inspection of the EGR valve. “Sooty/dusty is good, shellac/crusty needs to be cleaned.” If the valve is shellac/crusty, don’t skimp, go ahead and do the entire EGR system cleaning.
If you price the EGR Cleaning Kit parts over-the-counter at Mopar the cost is over $250 plus $40 for the cleaning solution. We would suggest using the Cummins equivalent parts for the gaskets and filter that are needed. We would suggest using Simple Green (it smells just like the Mopar cleaner) or Purple Power as your cleaning solution.
Our revised 6.7L EGR Cleaning Kit contains the following:
(1) Large Exhaust Manifold Gasket • (2) EGR Valve Gaskets • (1) EGR Butterfly Gasket • (1) Exhaust Manifold Gasket
(4) EGR Plumbing Gaskets • (1) Airhorn Gasket • (2) Rubber Plugs • (3) Coolant O-rings
Freddie knows that if you are going to spend time cleaning the EGR valve and EGR cooler, that you’ll remove and clean the intake air horn that the EGR valve is bolted to. The replacement gasket for air horn-to-intake manifold is 5264566 and it is included in our EGR Cleaning Kit. Additionally our kit has thorough instructions for removal of the parts and tips on best method(s) for cleaning.
Finally, Freddie Frugal adds two rubber plugs for the ends of your cooler assembly so you don’t waste cleaning fluid. Fill up the cooler, cap it off, and soak it overnight. Use the caps to shake the cooler with the cleaner inside.
Filter
‘19-‘23, 6.7L MK2019: $294.95
(4) LF16035; (2)
(2) FS_MOP68436631AA; No Air Filter
‘13-‘18, 6.7L MK2013: $292.95
(4) LF16035; (2) FSMOP68157291;
(2) FS_MOP68197867; No Air Filter
‘10-‘12 , 6.7L MK2010N: $187.95
(4) LF16035; (2) FS_MOP68157291; No Air Filter
‘07.5-‘09, 6.7L MK2007: $140.95
(4) LF16035; (2) FS43258; No Air Filter
‘03-‘07, 5.9L MK2003: $92.95
(4) LF16035; (2) FS19856; No Air Filter
‘00-‘02, 5.9L MK12626: $110.95
(4) LF16035; (2) FS19855; (1) AF-4189
‘97-‘99, 5.9L MK12627: $125.95
(4) LF16035; (2) FS19598; (1) AF-4189
‘94-‘96, 5.9L MK12628: $116.95
(4) LF16035; (2) FS1253; (1) AF-4189
‘89-‘93, 5.9L MK12625: $90.95
(4) LF16035; (2) FS1232; No Air Filter
All 4/2 and 4/2/1 Maintenance Kits use the Cummins StrataPore oil filter and either a Cummins, or Mopar branded fuel filter (same filter, but we offer you the less expensive item).
We took time to analyze the filter purchasing quantities of our customers. Predictably, in a given 30,000 mile maintenance interval, the oil filter is changed four times, the fuel filter two times, and the air cleaner is changed once. We’re pleased to offer this commonsense idea in a prepackaged kit for your Ram Cummins Diesel truck.
QUICK SERVICE FILTER KITS
Is it time to replace the filters in your ‘89-’23 Ram/Cummins Turbo Diesel truck? Get our Quick Service Kits that include filters for one service change.
‘19-‘23, 6.7L QSK1006: $164.95
AF-53034051AB Air Filter
LF-5083285AA Oil Filter
FS_68157291AA Fuel Filter
FS_68436631AA Fuel Filter
‘13-‘18, 6.7L QSK1005: $163.95
AF-68517554AA Air Filter
LF-5083285AA Oil Filter
FS_68157291AA Fuel Filter
FS_68197867AB Fuel Filter
Filtration
‘19-‘23, 6.7L QSK1004: $129.95
LF-5083285AA Oil Filter
FS_68157291AA Fuel Filter
FS_68436631AA Fuel Filter
‘13-‘18, 6.7L QSK1003: $128.95
LF-5083285AA Oil Filter
FS_68157291AA Fuel Filter
FS_68197867AB Fuel Filter
‘19-‘23, 6.7L QSK1002: $116.95
FS_68157291AA Fuel Filter
FS_68436631AA Fuel Filter
‘13-‘18, 6.7L QSK1001: $115.95
FS_68157291AA Fuel Filter
FS_68197867AB Fuel Filter
https://www.genosgarage.com/tech_info 10 Ram Turbo Diesel Parts & Accessories #121 FILTERS & BELTS
‘10-‘12 , 6.7L QSK1021: $131.95 AF-27684 Air Filter LF16035 Oil Filter • FS53000 Fuel Filter ‘10-‘12 , 6.7L QSK1013: $99.95 LF16035 Oil Filter • FS53000 Fuel Filter ‘07.5-‘09, 6.7L QSK1020: $87.95 AF-27684 Air Filter LF16035 Oil Filter • FS43258 Fuel Filter ‘07.5-‘09, 6.7L QSK1012: $54.95 LF16035 Oil Filter • FS43258 Fuel Filter ‘03-‘07, 5.9L QSK1019: $49.95 AF-4177 Air Filter LF16035 Oil Filter • FS19856 Fuel Filter ‘03-‘07, 5.9L QSK1011: $31.95 LF16035 Oil Filter • FS19856 Fuel Filter ‘00-‘02 , 5.9L QSK1018: $50.95 AF-4189 Air Filter LF16035 Oil Filter • FS19855 Fuel Filter ‘00-‘02 , 5.9L QSK1010: $30.95 LF16035 Oil Filter • FS19855 Fuel Filter ‘97-‘99, 5.9L 12V & 24V QSK1017: $57.95 AF-4189 Air Filter LF16035 Oil Filter • FS19598 Fuel Filter ‘97-‘99, 5.9L 12V & 24V QSK1009: $37.95 LF16035 Oil Filter • FS19598 Fuel Filter ‘94-‘96, 5.9L QSK1016: $52.95 AF-4189 Air Filter LF16035 Oil Filter • FS1253 Fuel Filter ‘94-‘96, 5.9L QSK1008: $33.95 LF16035 Oil Filter • FS1253 Fuel Filter ‘93, 5.9L QSK1015: $64.95 AF-25023 Air Filter LF16035 Oil Filter • FS1232 Fuel Filter ‘89-‘92 , 5.9L QSK1014: $60.95 AF-4555M Air Filter LF16035 Oil Filter • FS1232 Fuel Filter ‘89-‘93, 5.9L QSK1007: $30.95 LF16035 Oil Filter • FS1232 Fuel Filter
Maintenance Kits, 4/2 & 4/2/1
FS_MOP68157291;
OIL FILTERS
MOPAR - Oil/Standard Filter (‘89-‘23, 5.9L & 6.7L ) This filter can be used on ALL ‘89-‘23 Turbo Diesel engines. The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580) H
Cummins - Oil/StrataPore (‘89-‘23, 5.9L & 6.7L) This filter can be used on ALL ‘89-‘23 Turbo Diesel engines. The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580)
Cummins - Oil/Standard (‘89-‘23, 5.9L & 6.7L)This filter can be used on ALL ‘89-‘23 Turbo Diesel engines. The advantage of this filter is the fluted can which simplifies removal from underneath using the Lisle End Cap Filter Wrench (#LC61580)
Cummins - Fuel Filter (‘94-‘96) (Also for Prime-Loc on 12-valve engines, ‘94-‘98)
Cummins - Fuel Filter (‘89-‘93) Does not use Water/Fuel sensor.
Cummins - Fuel Filter (‘89-‘93) Requires Water/Fuel sensor.
$15.95
Cummins - Fuel Filter For Prime-Loc on 24-valve engines up to 2002 and our FFK98599 filter kits. FS19519: $20.95
MOPAR - Fuel/Water Separator (Chassis Mounted ) (‘19-‘22, 6.7L, 2500/3500/4500/5500 & ‘20-‘22 1500 EcoDiesel trucks.)
MOPAR - EcoDiesel Fuel Filter (‘14-‘19, 3.0L) Ram 1500
$55.95
$39.95
Cummins - FASS Fuel/Water Separator 0lder Titanium 95 Series only with red or blue “T” block assembly. Replaces WS2001/FS19768 FS19594: $15.50
Cummins - FASS Fuel/Water Separator Older Titanium 95 Series only with red or blue “T” block assembly. (3 micron) Replaces FF2003
Cummins - FASS 150 HD Series Large filters - 8” tall. Works with HF6604.
$10.50
$16.95
Order 770-886-2500 or genosgarage.com 11 Product prices subject to change without notice. FILTER S & BELTS
p60-69 LF5083285AA: $12.95
TDR71,
LF16035: $15.95
LF3972: $8.95 MOPAR - EcoDiesel V6 Replacement Oil Filter Cartridge (‘20-‘23, Ram 1500 EcoDiesel 3.0L) LF68507598AA: $68.95 MOPAR - EcoDiesel V6 Replacement Oil Filter Cartridge (‘14-‘18, Ram 1500 EcoDiesel 3.0L & ‘19 Classic) LF68492616AA: $82.95 Cummins - Oil Sampling Kit Monitor
of sample.) CC2543: $26.00 AIR FILTERS MOPAR - Air Filter (‘19-‘23, 6.7L) AF-53034051AB: $37.95 MOPAR - Air Filter (‘07.5-‘18, 6.7L) AF-68517554AA: $36.95 Cummins - Air Filter (‘07.5-‘23, 6.7L) AF-27684: $33.95 MOPAR - Air Filter (‘03-‘07, 5.9L) w/Deeper pleets - 4” deep AF-53034249AA: $31.95 Cummins - Air Filter (‘03-‘07, 5.9L) w/Deeper pleets - 4” deep AF-4169: $31.95 Cummins - Air Filter (‘03-‘07, 5.9L) New design without foam front. 1-7/8” deep pleets. AF-4177: $18.95 MOPAR - Air Filter (‘94-‘02, 5.9L) AF-4864442AB: $35.95 Cummins - Air Filter (‘94-‘02, 5.9L) Supersedes AF-25541 AF-4189: $20.95 Cummins - Air Filter (‘93, 5.9L) AF-25023: $35.95 Cummins - Air Filter (‘89-‘92, 5.9L) AF-4555M: $31.95 MOPAR - EcoDiesel V6 Air Filter (‘20-‘23, Ram 1500 EcoDiesel 3.0L) AF-68441763AA: $29.95 MOPAR - EcoDiesel V6 Air Filter (‘14-‘18, Ram 1500 EcoDiesel 3.0L & ‘19-‘20 Ram 1500 Classic) AF-68190705AB: $30.95 FUEL FILTERS MOPAR - Nanonet Fuel Filter (Engine Mounted) (‘10-‘23, 6.7L) 3 micron FS_68157291AB: $66.95 Cummins - Nanonet Fuel Filter (Engine Mounted) (‘10-‘23, 6.7L) 3 micron FS53000: $88.95 MOPAR - Fuel/Water Separator (Chassis Mounted ) (‘19-‘23, 6.7L, 2500/3500/4500/5500 & ‘20-‘22 1500 EcoDiesel trucks.) FS_68436631AA: $57.95 Cummins - Fuel/Water Separator (Chassis Mounted ) (‘13-‘18, 6.7L) 2500/3500/4500/5500 FS20089: $60.95 RACOR - Fuel/Water Separator (Chassis Mounted ) (‘13-‘18, 6.7L) 2500/3500/4500/5500 PFF54529: $69.00 MOPAR - Fuel/Water Separator (Chassis Mounted ) (‘13-‘18, 6.7L) 2500/3500/4500/5500 H TDR80, p63 FS_68197867AB: $54.95 MOPAR - Severe Duty Fuel Filter (‘04.5-‘12, 6.7L & 5.9L) For MOPAR add-on severe duty filtration kit. Replaces 68083826AA. 68083823AB: $39.95 MOPAR - Fuel Filter (‘10-‘12, 6.7L) 5 micron FS_68065608: $69.95 Cummins - Fuel Filter (‘10-‘12, 6.7L) (5 micron) FS43255: $68.95 Cummins - Fuel Filter (‘07.5-‘09, 6.7L) 5 Micron - Filter and shell. FS 2 design FS43257: $58.95 MOPAR - Fuel Filter (‘07.5-‘09, 6.7L) 5 Micron - Filter and shell. FS 2 design FS_68061633AB: $99.95 Cummins - Fuel Filter (‘07.5-‘09, 6.7L) 5 Micron - Filter only. FS 2 design FS43258: $41.95 MOPAR - Fuel Filter (‘07.5-‘09, 6.7L) 5 Micron - Filter only. FS 2 design FS_68061634AA: $72.95 MOPAR - Fuel Filter (‘03-‘07, 5.9L) 7 Micron FS_68001914AB: $39.95 Cummins - Fuel Filter (‘03-‘07, 5.9L) 7 Micron FS19856: $16.95 Cummins - Fuel Filter (‘00-‘02, 5.9L) 10 Micron FS19855: $15.95 Cummins - Fuel Filter (‘97-‘99, 5.9L) FS19598: $23.95 MOPAR - Fuel Filter (‘94-‘96,
4874274: $49.95
engine oil. (Includes sample collection bottle, instructions and analysis
5.9L)
FS1253:
$18.95
FS1251:
$13.95
FS1232:
FS_68436631AA:
FS_68235275AB:
FF5712:
FS1001:
Save money with our Quick Service Kits on page 10.
If purchasing fuel filters for your ‘10-‘12 truck, we recommend the NanoNet filters.
FUEL FILTERS
Cummins - FASS 150 HD Series Works with FS1001 filter. Replaces FF1003 Water Separator
FASS - 150 HD Series Large filters - 8” tall. (3 micron) Titanium Series - Extended length extreme service filter.
FASS - 150 HD Series Large filters - 8” tall. (3 micron) Replaces HF6604 & FF1003 Water Separator
Cummins - FASS Titanium & Platinum Series
Titanium & Platinum Series only with black or gray “T” block assembly. (2 micron) Fuel filter and water separator.
FASS - Signature Series Paticulate Filter Signature Series with black “T” block and Legacy Series with gray ‘T’ block.
FASS - Signature Series Paticulate Filter XL Signature Series with black “T” block and Legacy Series with gray ‘T’ block.
Replaces FS-1001 and only works with XWS-1002 filter.
$48.95
$32.30
$38.00
$29.45
$20.90
$23.75
FASS - DRP In-line 5/16” Pre-Filter For DRP-02 fuel pumps. NA-33007: $5.50
Donaldson Fuel/Water Separator For FASS Platinum High Pressure Fuel Pump and newer Titanium fuel pumps. (FASS-P-D07-095G, FASS-P-D08-095G, FASS -T-D07-095G & FASS-T-08-095G)
$31.95 Universal In-line Fuel Filter Screen This 3/8” filter required when using the DDRP with Vulcan Relo Kits.
Adapter Nipple Required to use XWS-3002 on Red ‘T’ Block and Blue ‘T” block assemblies.
MOPAR - Transmission Filter, Aisin AS69RC (‘13-‘23)
$8.95
$7.09 TRANSMISSION FILTERS
MOP-68224232: $71.95
MOPAR - Replacement Transmission Sump Filter, 68RFE (2WD) (‘07.5-‘09, 6.7L) This transmission pan does not require a gasket. Use
SERPENTINE BELTS
GATES - Serpentine Belt (A/C & Single Alternator) (‘13-‘18, 6.7L)
brake
$35.95
GATES - HD Serpentine Belt (assumes A/C) (‘03-‘12, 5.9L & 6.7L) See Accessory Drive Belt Kits, page 76 & 77. GATES-K081264HD: $69.95
GATES - Serpentine Belt (non-A/C) (‘03-‘09)
CUMMINS - Serpentine Belt (assumes A/C) (‘03-‘07, 5.9L) with Jacobs Brake
GATES - HD Serpentine Belt (assumes A/C) (‘94-‘02) See Accessory Drive Belt Kits, page 72.
GATES - Serpentine Belt (non-A/C) (‘94-‘02)
GATES - HD Serpentine Belt (assumes A/C) (‘91.5-‘93) Intercooled
GATES - Serpentine Belt (non-A/C) (‘91.5-‘93) Intercooled
GATES - HD Serpentine Belt (assumes A/C) (‘89-‘91) Non-intercooled
GATES - HD Serpentine Belt (non-A/C) (‘89-‘18) Non-intercooled & no air-conditioning
MOPAR - EcoDiesel Serpentine Belt (‘14-‘23, 3.0L) Ram 1500 EcoDiesel
GATES - EcoDiesel HD Serpentine Belt (‘14-‘23, 3.0L) Ram 1500 EcoDiesel
Ram Turbo Diesel Parts & Accessories #121
GATES-K081102: $32.95
BELT-3947077: $105.95
GATES-K080810HD: $33.95
GATES-K080653: $29.95
GATES-K080830HD: $45.95
GATES-K080635: $30.95
GATES-K080816HD: $42.95
GATES-K080645HD: $27.95
4627897AB: $26.95
GATES-KO60812HD: $24.95
Get
information
12
& BELTS
Ram Cummins technical
at our website: https://www.genosgarage.com/tech_info
FILTERS
HF6604:
XWS-3002-XL:
XWS-1002:
XWS-3002:
PF-3001:
PF-3001-XL:
P553203:
FF5079:
FSN-2001:
RTV silicone or sealant only. MOP-5015267: $31.95 MOPAR - Replacement Transmission Sump Filter, (68RFE and Mag-Hytec pan) (‘07.5-‘23, 4WD) & (‘10-‘22, 2WD) with 6.7L engine. This transmission pan does not require a gasket. Use RTV silicone or sealant only. MOP-5013470: $34.95 MOPAR - RTV Sealer, Recommended for 68RFE (4WD and 2WD) MOP-05010884AD: $6.95 MOPAR - Replacement Transmission Screw-On Filter, 68RFE (4WD and 2WD) (‘07.5-‘23, 6.7L) MOP-05179267AD: $24.95 MOPAR - Replacement Transmission Sump Filter, Aisin AS68RC 6-speed Auto (4WD and 2WD) (‘07.5-‘12, 6.7L) MOP-68019688: $127.95 MOPAR - Transmission Filter and Gasket Replacement Kit (‘98-‘07) MOP-KIT-52118789: $40.95 MOPAR - Transmission Filter and Gasket Replacement Kit (‘89-‘97) MOP-KIT-3515996: $47.95 MOPAR - Transmission Filter ONLY (‘98-‘07) MOP-52118789: $19.95 MOPAR - Transmission Filter ONLY (‘89-‘97) MOP-3515996: $24.95 MOPAR - EcoDiesel Transmission Service Kit (‘14-‘23, 3.0L) Ram 1500 MOP68225344: $199.95
GATES - HD Serpentine Belt (A/C & Single Alternator) (‘19-‘23, 6.7L) GATES-K081244HD: $29.95 GATES - HD Serpentine Belt (A/C & Dual Alternator) (‘19-‘23, 6.7L) GATES-K081294HD: $33.95 MOPAR - Serpentine Belt (A/C & Dual Alternator) (‘19-‘23, 6.7L) 5281817AA: $32.95 MOPAR - Serpentine Belt (A/C & Single Alternator) (‘19-‘23, 6.7L) 5281816AA: $30.95 MOPAR - Serpentine Belt (Dual Alternator) (‘13 -‘18, 6.7L) 4627589AA: $166.95 MOPAR - Serpentine Belt (Single Alternator) (‘13 -‘18, 6.7L) MOP-04627751AA: $49.95 MOPAR - Serpentine Belt (Single Alternator) (‘03 -‘12, 6.7L) 53041138AE: $66.95 MOPAR - Serpentine Belt (Single Alternator) (‘94 -‘02, 5.9L) 53040171AD: $49.95 GATES - HD Serpentine Belt (A/C & Dual Alternator) (‘13-‘18, 6.7L) Also fits ‘03-‘07 with Jacobs
GATES-K081298HD:
$84.95
GATES-K081243HD:
gENO’S garage
diesel fuel filler cap, ‘19-’23
‘19-‘23, Ram 2500/3500
‘20-‘23 1500 EcoDiesel
GG-DSLFC19: $37.95
This cap fits all Ram 2500/3500 filler necks with 3 guide bars inside the neck. Cap is magnetic so you can put it on the filler door while adding fuel so you don’t leave it behind.
ALUMINUM GREEN LOCKING
FUEL CAP, ‘13-‘23 V
‘19-‘23, Ram 2500/3500 & ‘20-‘23, 1500 EcoDiesel
GG-EZ45GLC: $66.95
Includes one GG-EZSKEY-P locking key.
‘13-‘18, Ram 2500/3500 & ‘13-‘18, 1500
GG-EZLC1: $54.95
Includes one GG-EZSKEY-P locking key.
Spare Locking Key GG-EZSKEY-P: $9.50
In 2013 the folks at Ram introduced a new fuel fill neck. The top of the neck is non-threaded and this design made the traditional screw-in and locking fill cap obsolete.
The new design is simply a flapper-on-a-spring. Ram responded to the market’s need for a fill cap by adding an 89¢ plastic plug. However, folks still wanted a locking fuel cap.
This locking fuel cap is a simple design, a twist of the key lets you move the locking collar to remove the fuel cap.
MOPAR DIESEL FUEL
FILLER DUST CAP, ‘19-‘23
‘19-‘23, Ram 2500/3500
‘20-‘23, Ram 1500 EcoDiesel - Classic 82215782: $26.95
This dust cap helps keep the fuel filler area clean so debris does not end up in your truck’s fuel tank
Aluminum Green ‘DIESEL’ FUEL FILL Cap
‘13-‘18, 2500/3500 6.7L
‘14-‘19, Ram 1500 EcoDiesel
GG-DSLFC13: $23.95
This billet dust cap has an external O-ring that slides into the fuel fill neck. There is a magnet recessed into the base so that you can put the fuel cap on the back side of the door when filling the tank.
LOCKING
‘00-‘12 2500/3500
‘08-‘23 Cab/Chassis
GATES-31836D: $17.95
‘89-‘99 LOCKING
GATES-31734D: $20.95
Green Fuel Caps (‘89-‘23)
STANDARD
‘00-‘12 2500/3500
‘08-‘23 Cab/Chassis
GATES-31838D: $7.95
‘89-‘99 STANDARD
GATES-31615D: $8.95
The locking fuel caps are plastic with a stainless steel lock and key, the designs feature sturdy construction to meet Federal Fuel Safety Standards for fuel leakage. Locking gas caps include a quick on/off, quarter-turn, green locking gas cap and two keys.
A standard fuel cap can be used with your truck’s plastic tether by drilling a 7/32” hole – then enlarging by hand to a 1/4” hole – in the top of the cap.
gENO’S garage
GASOLINE fuel filler cap, ‘19-’22
‘19-‘22, Ram 1500 - Gas Engine
GG-GASLC19: $77.95
Includes one GG-EZSKEY-P locking key.
EZ-LOC ANODIZED BILLET ALUMINUM LOCKING FUEL CAP
‘08-‘23, Ram 3500/4500/5500 Cab/Chassis
GG-EZCC4G: $50.00
Includes one GG-EZSKEY-P locking key.
Spare Locking Key
GG-EZSKEY-P: $9.50
Heavy-duty anodized billet aluminum fuel cap. Each EZ-Loc comes with the EZ-Loc cap and an EZ-Loc Secure Key. This locking fuel cap is not designed to work with the OEM tether.
DEF-LOC
ALUMINUM LOCKING ‘DEF’ CAP, ‘13-’23
‘19-‘23, Ram 2500/3500/4500/5500
‘20-‘23, Ram 1500 EcoDiesel
GG-EZ45GDEF: $49.95
Includes one GG-EZSKEY-P locking key.
‘13-‘18, Ram 1500/2500/3500/4500/5500
‘19, Ram 1500 Classic
GG-EZDEF1: $49.00
Includes one GG-EZSKEY-P locking key.
Spare Locking Key Lock Tether
GG-EZSKEY-P: $9.50
GG-EZTETHER : $6.00
The DEF-Loc is the locking/tamper-resistant DEF cap for Dodge Ram diesels. Locking up your DEF prevents unwanted matter from being put into your DEF tank. The DEF-Loc also features an EPDM U-Cup seal and also has a venting feature cut into the underside of the stainless steel Secure Screw head.
Each DEF-Loc comes with the DEF-Loc cap and an EZ-Loc Secure Key. This DEF cap is not designed to work with OEM tether.
chassis/cab DEF CAP WITH TETHER, ‘13-’23 3500/4500/5500
68101183AC $39.95
DEF cap specifically for Ram Chassis/Cab trucks. Will not fit regular pickup trucks.
Made in USA
Made in USA Made in USA
Made in USA
Made in USA
Order 770-886-2500 or genosgarage.com 13 Product prices subject to change without notice. FUEL & DEF CAPS
Made in USA
EZ-loc pROFILED SECURE stainless steel TEE KEY GG-EZCTKEY $21.95 2.5” Long Spare EZ-loc Key GG-EZSKEY-P: $9.50 2.5” Long
These caps fit all gasoline engine Ram 1500 filler necks.
FRONT DIFFERENTIAL COVERS
‘13-‘23, 3500 & ‘14-‘22, 2500
AAM 12-9.25” 12 Bolt (+.50qt.)
PML11136: $255.00
‘03-‘12, 3500 & ‘03-‘13, 2500
AAM 14-9.25” Low Profile 14 Bolt (+.50qt.)
PML11118: $255.00
REAR DIFFERENTIAL COVERS
‘19-‘23, 2500/3500
AAM 11.5”, 11.8”, & 12” 14 Bolt (+.60qt.)
PML11176: $255.00
‘14-‘18, 2500
AAM 11.5” 14 Bolt (+.50qt.)
PML11147: $255.00
‘03-‘13, 2500 & ‘03-‘18, 3500
AAM 11.5” 14 Bolt (+.75qt.)
PML10361: $255.00
‘03, 2500
AAM 10.5” 14 Bolt (+.80qt.)
PML10302: $255.00
Front DiffERENTIAL Covers
9.25” DIFF COVER (‘14 -‘23, 2500 & 13
MH-AA12-925: $352.00
Increases capacity from 2.5 quarts to 4.5 quarts.
9.25” DIFF COVER (‘03-‘12, 3500 & ‘03-‘13, 2500
Increases capacity from 2.5 quarts to 4.5 quarts.
NOTE: Effective July 2012, Mag-Hytec redesigned the cover to alleviate interference with the track bar and steering damper. However, it is possible that modifications will have to be made to the U-bolt bracket or to the cover itself for clearance issues. It is important to pay very close attention to detail during installation. Once the cover has been installed or modified to work it cannot be returned.
Dana 60 (‘89-‘02) MH-DA60: $341.00
Increases capacity from 3.5 to 4.5 quarts.
Dana 60 w/Vented Cover (‘02) MH-DA60-VENT: $341.00
(Only Fits ‘02 Trucks with Vented Cover)
CAUTION: Installation of front cover is just a bit more involved than for Mag-Hytec rear differential covers. You need to pop the driver’s side tie-rod end loose from the steering knuckle to give clearance between the ring gear and the steering rod.
Mag-Hytec front diff covers increase the fluid capacity over the stock cover. They are a perfect match in appearance and function to the rear diff covers. Perhaps the most important feature for off-road use of your four wheel drive Dodge Ram is the angled ramp on the bottom half of the cover instead of a flat mounting flange. The purpose for this ramp is that if you hit a rock or other obstruction on the trail, the differential will tend to ride up and over it instead of smashing the cover into the gears.
1/8 NPT temperature sending unit fitting
Increased lubricant and cooling capacity
Rear Differential Covers
‘19-‘23, 3500 DRW / 11.5” and 12” American Axle (8 qt.)
MH-AA14-12: $385.00
‘19-‘23, 2500 / 11.5” and 12” American Axle (7 qt.)
For trucks with coil springs.
MH-AA14-12-CS: $385.00
‘14-‘18, 2500 / 11.5” American Axle (8 qt.)
For trucks with coil springs.
MH-AA11-5CS: $352.00
‘13-‘18, 3500 without rear sway bar
‘13, 2500 / 11.5” American Axle (8 qt.)
‘03-‘12, 2500/3500 MH-AA11-5: $352.00
‘03, 10.5 American Axle (6 qt.) MH-AA10-5: $352.00
Lubricant reference plug
NOTE: PML differential covers are designed to work with the OEM reusable gasket. Depending upon the number of times you have already changed the fluid, it may require the purchase of a new differential cover gasket.
‘94-‘02 Dana 80 10 Bolt (+.80qt.)
PML9520: $255.00
‘94-‘02 & ‘89-‘93 2500/3500
Dana 70 10 Bolt (+.80qt.)
PML9426: $255.00
The PML differential covers feature a low profile for clearance and oil fill/level check and drain holes to make it easy to follow the 15K oil change interval. Extra capacity, fins, and aluminum construction aid in heat dissipation to keep fluid cool.
‘ 94-‘02 Dana 80 (8 qt.) MH-DA80: $319.00
‘94-‘02 Dana 70 (6 qt.)
‘89-‘93, 2500/3500 MH-DA70: $314.00
NOTE: DANA 80/2WD APPLICATIONS
When ordering, please let us know if you have a two-wheel drive truck with a Dana 80 and a factory-installed sway bar or Hellwig sway bar so that a sway bar relocation kit can be included with your rear differential cover.
Universal Replacement Drain Plug
MH-DRPLUG: $15.00
If the original drain plug that came with the Mag-Hytec pan or cover gets damaged, we carry this universal replacement. Includes Allen tool.
Get
technical information at
https://www.genosgarage.com/tech_info 14 Ram Turbo Diesel Parts & Accessories #121 DRIVETRAIN PARTS & ACCESSORIES ‘03-‘ 12, 9.25” 11118 18, 14 bolt 11147
Ram Cummins
our website:
Deep TranSMISSION Pan (‘89-‘07)
‘98-‘07 MH-727-9803: $314.00
‘89-‘97 MH-727-9497: $314.00
NOTE: Also fits ‘03-‘07 HD 48RE transmission.
Use the Mag-Hytec Deep Pan to add capacity to your stock 727, 518, 47RE or 48RE automatic transmission. The pan for years ‘94-‘97 will increase the lube capacity by 1.5 quarts. The pan will not increase the capacity of the ‘98 and up model 47RE transmissions as Dodge enlarged the factory pan.
We include a transmission filter with your purchase.
Increased fluid and cooling capacity
Magnetic drain plug
The Mag-Hytec Deep Pan has a magnetic drain plug, pre-drilled 1/8 NPT fitting for a temperature sensor, transmission gasket, and mounting hardware
I
‘Double Deep’ Transmission Pan (‘89-‘07, 5.9L)
‘ 98-‘07 MH-727DD-9803: $352.00 ‘89-‘97 MH-727DD-9497: $352.00 Fits the stock 727, 518, 47RE or 48RE automatic transmission.
The “Double Deep” pan has all the same features as the Deep Pan; magnetic drain plug, pre-drilled 1/8 NPT fitting for a temperature sensor, transmission gasket, and mounting hardware.
In addition, with the “Double Deep” pan, the inside depth of the pan is increased from 3” to 5-1/4”, which adds another four quarts of fluid capacity to the system. The pan is still tucked 1/2” above the truck’s center frame cross-member. The kit includes spacer hardware to relocate the transmission filter deep into the sump.
68RFE TranSMISSION Pan (‘07.5-‘23, 6.7L)
MH-68RFE-A: $369.00
Mag-Hytec’s high-capacity deep sump for the 68RFE transmission provides for an additional 3 qts. of fluid for maximum cooling from its finned aircraft aluminum construction.
A 1/8 NPT temperature sender port lets you add a temperature gauge to keep tabs on fluid temperatures during heavy-duty use or long tows. When it is time for a fluid change, a magnetic drain plug makes draining the fluid easy and lets you see if there are any contamininants in the fluid.
Freddie Frugal includes a replacement sump filter and gasket with the purchase of the 68RFE pan. The customer is responsible for the Mopar 5179267 spin-on filter (page 12)
transmission pans
STANDARD TRANSMISSION PANS
‘13-‘23, 6.7L 3500/4500/5500
Aisin AS69RC (+3qt to 4qt. w/4WD & 2WD)
PML11142: $440.00
‘07.5-‘23, 6.7L - 68RFE (+2.5qt. w/4WD; +3qt. w/2WD)
( Will not work in trucks with Aisin transmission.)
PML10304: $380.00
‘07.5-‘12, 6.7L C/C only.
Aisin AS68RC (3qt to 4qt.)
PML11139: $440.00
‘89-‘07, 5.9L - 47RE or 48RE ) (up to 2qt.)
PML9393: $315.00
EXTRA-DEEP TRANSMISSION PAN
‘07.5-‘23, 6.7L 2500/3500 68RFE ( Adds 4 to 4.5 additional quarts)
PML11161: $380.00
NOTE: PML pans are designed to work with the OEM reusable gasket. Depending upon the number of times you have already changed the fluid, it may require the purchase of a new trans pan gasket. ‘07.5-‘18 trucks with 68RFE did not come with an OEM pan gasket, but use RTV sealant. The cast aluminum PML pans feature a magnetic drain plug and 1/4” fins for cooling. The pans have a 1/8 NPT transmission temp port.
TRANS-COOL
DUAL COOLERS KIT
‘05-‘18, G56
TRANSCOOL_2: $239.95
‘94-‘05, NV4500/NV5600
TRANSCOOL_3: $239.95
‘89-‘93, Getrag 360
TRANSCOOL_1: $239.95
SINGLE COOLER KIT
‘05-‘18, G56
TRANSCOOL_SGL_2: $126.95
‘94-‘05, NV4500/NV5600
TRANSCOOL_SGL_3: $126.95
‘89-‘93, Getrag 360
TRANSCOOL_SGL_1: $126.95
The TRANS-COOL is designed to transmit heat from the inner surfaces to the air-cooled outer fins which helps dissipate heat from the transmission. Each individual cooler adds an additional half a quart of trans fluid to the gearbox.
Depending on the TRANS-COOL kit, it includes: aluminum cooler(s); PTO gasket(s); twelve or six PTO bolts and washers; and 1/8 NPT temperature gauge ports with plugs.
of 4 inches of clearance from the base of the PTO mounting surface
Order 770-886-2500 or genosgarage.com 15 Product prices subject to change without notice.
I
Cast of 356T6 Aluminum and black powercoated
Cast of 356T6 Aluminum and black powercoated
DRIVETRAIN PARTS & ACCESSORIES Specify truck year and transmission when ordering.
We include a transmission filter with your purchase of a pan.
Manual TransMISSION Coolers Check for possible clearance problems with a larger aftermarket exhaust system before ordering. You will need a minimum
2003-2009
2010-2012
COVERCRAFT & MOPAR
COVERCRAFT
‘10-‘12, 2500/3500
WINTER_FR_10: $109.95
MOPAR ‘03-‘09, 2500/3500 ‘07, 3500 CC
‘08-’10, 3500/4500/5500 CC
82208646: $132.00
COVERCRAFT ‘03-‘09, 2500/3500
WINTER_FR_0309: $109.95
COVERCRAFT ‘94-‘02, 2500/3500
WINTER_FR_9402: $109.95
Improve engine warm-up time in cold weather with a Covercraft or Mopar winter grille cover for your ‘94-‘12 Ram Cummins truck. In summer the cover is rolled up and acts as a bug screen to help keep the radiator free-flowing for better cooling.
The grille cover is made of black vinyl and goes over the front core support. The material rolls up and down so you can adjust the amount of air you want to pass through the radiator.
A/C Condenser Guard I
‘13-‘18, 6.7L
WD_COND_GR_13: $54.95
‘10-‘12, 6.7L
WD_COND_GR_10: $54.95
‘03-‘09, 5.9L & 6.7L
WD_COND_GR_0307: $54.95
‘94-‘02, 5.9L
WD_COND_GR_9402: $54.95
The air conditioning condenser on the ‘94-‘18 Dodge Ram has no protection coming from the factory and may be subject to costly damage. The condenser guard addresses this by covering the condenser in full with a black powdercoated 16 gauge guard with 1/2” perforated holes for maximum air flow. The condenser guard has a U-shaped lip that covers the top of the condenser’s fins to keep them from being bent.
Installation for ‘94-‘09 trucks is straightforward and takes only minutes. The lip of the condenser guard is put on top of the air conditioning condenser and secured at the bottom with zip ties.
On the ‘10-‘18 trucks the grille has to be removed (instructions show you how) to install the guard. Since the grille has to be removed we strongly suggest purchasing our Quick Grille Release Kit (#QGKT) so that future access to the area becomes a 5-second proposition.
A/C CONDENSER/INTERCOOLER Guard, ‘13-’18
‘13-‘18, 6.7L CONDENSER/INTERCOOLER GUARD KIT GG-CD-IC4G: $87.95 ( Includes (1) WD_COND_GR_13 and (1) GG-ICGUARD)
‘13-‘18, 6.7L INTERCOOLER GUARD
GG-ICGUARD: $49.95
The intercooler in the ‘13-‘18 trucks is now located beneath the radiator rather than behind like the ‘10-‘12 trucks. This guard is similar to our condenser guard and protects the intercooler from damage by road debris. If you already have the A/C condenser guard in your truck, you can add the intercooler guard.
Save when you buy the condenser and intercooler guard together!
Quick Grille Release Kit (‘10-‘18)
QGKT: $26.95
H TDR71, p141-143 I
p
p
Ram Cummins/ Ram EcoDiesel Winter Front/ Bug Screen (‘10-‘21)
‘19-‘21, 2500/3500/4500/5500 - MOPAR 82216096AA: $109.95
‘10-‘18, 2500/3500
‘11-‘18, 3500/4500/5500 CC - MOPAR 82212217AD: $173.95
‘14-‘20, EcoDiesel (old bodystyle) - MOPAR 82213959AC: $129.95 Closeout!
‘14-‘18, EcoDiesel GG-WFED14: $99.95 Closeout!
This exterior mount winter front/bug screen installs outside the engine compartment and fits over the truck’s grill.
Fasten and unfasten the velcro to roll and unroll it.
Since 1994 and the Second Generation truck, with its grille attached to the hood design, Turbo Diesel owners have come to expect easy access to the radiator as well as access to the engine.
No more with your ‘10-‘18 truck? Hold on, we’ve corrected this design flaw/service access problem with the Quick Grille Release kit for Fourth Generation trucks.
The Quick Grille Release Kit is a simple collection of hardware store parts, but we’ve made refinements by sourcing tether-type release pins. Use the bumper as a step again with this kit. Installation instructions included.
*Will not work on ‘19+ 1500/2500/3500 or 14-‘18 EcoDiesel trucks.
Get
technical information at our
https://www.genosgarage.com/tech_info 16 Ram Turbo Diesel Parts & Accessories #121 WINTER FRONTS & CONDENSOR GUARDS
Ram Cummins
website:
Left side covered up/Winter Front.
Right side unrolled/Bug Screen.
Available in Black only.
1994-2002
Shown uncoated for clarity.
24” X 24” nylon mesh bug screen included with each Condenser Guard
2010-2012
Grille must be removed to install the Winter Front on ‘10-‘12 trucks.
1994-2002
B6 4600 Series
(For STOCK RIDE HEIGHT.)
I f you’re looking for suspension performance, the B6 4600 Series shock absorber is the best solution to improve your truck’s ride.
Monotube gas pressure construction • Improved ride and handling Added traction and enhanced stability • Increased performance when hauling or towing.
B8
4WD w/o Air Ride: $108.00 each
0”-1” lift) BIL-24-302043
‘14-‘23, 2500 4WD
2”-2.5” lift ) BIL-24-268639: $108.00 each
4WD w/o Air Ride: $108.00 each
REAR (2” lift ) BIL-24-285681
4WD w/Air Ride: $108.00 each
REAR BIL-24-285667
‘13-‘23, 3500 4WD
2”-2.25” lift ) BIL-24-251747: $ 108.00 each 0-1” lift ) BIL-24-302326: $ 108.00 each
Excludes air leveling suspension - rear only.)
‘13-‘18, 2500 4WD 2”-2.5” lift ) BIL-24-268639: $108.00 each
0-1” lift ) BIL-24-239455: $108.00 each
Excludes air leveling suspension - rear only.)
0-2.5” lift ) BIL-24-185776: $108.00 each 0-2” lift ) BIL-24-191203: $108.00 each
‘03-‘12, 2500/3500 4WD
FRONT (0-2.5” lift ) BIL-24-185776: $108.00 each
REAR (0-2” lift ) BIL-24-191203: $108.00 each
Massive Self-Adjusting Digressive Piston Instantly reacts and adjusts for any condition... smooth road, rough road or no road. Provides maximum vehicle body motion control while maintaining superior comfort.
High Pressure Nitrogen Gas and “Floating” Dividing Piston Eliminates the possibility of oil foaming and performance loss.
‘94-‘02, 2500/3500 4WD
FRONT (0-2.25” lift ) BIL-24-185776: $108.00 each
REAR (0-1” lift ) BIL-24-185783: $108.00 each
REAR (0-2” lift ) BIL-24-191203: $108.00 each
‘89-‘93, 2500/3500 4WD FRONT BIL-33-185590: $108.00 each REAR BIL-33-185569: $108.00 each
‘14-‘23, RAM 2500 4X4 POWER HOP KIT
GG-PHOPKIT: $235.95
This kit dampens axle harmonics under power and allows for extra load carrying capacity. Fits 2500 4x4 trucks only.
Kit includes:
• Bilstein Damper
• Axle Mounting Bracket
• Mounting Hardware
H TDR 98, pg. 7
NOTE: Will not work on Power Wagon. Please make sure you have the 4 mounting holes on the top of the differential and mounting bracket on frame crossmember.
Order 770-886-2500 or genosgarage.com 17 Product prices subject to change without notice. BILSTEIN SHOCK ABSORBERS
Brake Pads
Our local Dodge dealer introduced the MOPAR brake pads to us, and we believe they are a great value. If you are happy with the OEM brake pads on your truck, you will be happy with these.
FRONT DISC BRAKE PADS
‘19-‘23, 2500/3500 2WD & 4WD
BRAKE-68461656: $319.95
‘09-‘18 , 2500/3500
BRAKE-2AMV1148AA: $82.00
‘09-‘18 , 1500
BRAKE-2AMV1350AC: $74.95
‘08-‘23, 4500/5500 2WD & 4WD
2AMV1093AC: $99.95
‘03-‘08 , 2500/3500
BRAKE-2AMV1267AA: $71.95
‘00-‘02 , 2500/3500
BRAKE-2AMV1254AB: $51.95
REAR DISC BRAKE PADS
‘19-‘23, 2500/3500 SRW
BRAKE-68453097: $299.95
‘19-‘23, 3500 DRW
BRAKE-68451229 $329.95
‘09-‘18 , 2500/3500
BRAKE-2AMV2158AB: $99.95
‘97-‘99, 2500 4WD - 7500LB AXLE
BRAKE-V1012364AB: $68.95
‘97-‘99, 2500 4WD - 8800LB AXLE
BRAKE-2AMV1279AA: $69.95
‘94-‘99, 2500 2WD
BRAKE-V1012364AB: $68.95
‘94-‘99, 3500 2WD/4WD
BRAKE-2AMV1279AA: $69.95
‘94-‘96, 2500 4WD - 3500LB AXLE
BRAKE-V1012364AB: $68.95
‘94-‘96, 2500 4WD - 4500LB AXLE
BRAKE-2AMV1279AA: $69.95
‘08-‘23, 4500/5500 2WD & 4WD
2AMV1093AC: $99.95
‘01.5-‘08 , 2500/3500
BRAKE-2AMV2257AB: $69.95
LEARN MORE: TYPES OF BRAKE PADS genosgarage.com/downloads/TechPDF/TDR51_BrakePadSpottersGuide.pdf
Brake Pads
SUPER-DUTY
(‘19-‘23) 2500/3500
FRONT BRAKE-HB930P.786: $85.00
(‘09-‘18) 2500/3500
FRONT BRAKE-HB633P.790: $141.95
REAR BRAKE-HB634P.750: $121.95
(‘03-‘08) 2500/3500
FRONT BRAKE-HB552P.722: $122.95
REAR BRAKE-HB299P.650: $117.95
(‘01.5-‘02) 2500/3500
REAR BRAKE-HB299P.650: $117.95
HEAVY-DUTY
(‘00-‘02) 2500/3500
FRONT BRAKE-HB487F.733: $83.95
(‘97-‘99) 2500 4WD
FRONT (7500lb axle) BRAKE-HB296P.670: $105.95
FRONT (8800lb axle) BRAKE-HB298P.787: $107.95
(‘94-‘99) 2500/3500
FRONT (2500 2WD) BRAKE-HB296P.670: $105.95
FRONT (3500 2WD/4WD) BRAKE-HB298P.787: $107.95
(‘94-‘96) 2500 4WD
FRONT (3500lb axle) BRAKE-HB296P.670: $105.95
FRONT (4500lb axle) BRAKE-HB298P.787: $107.95
Brake pad compounds are a compromise.
If you choose the HAWK Super-Duty pad (suffix “P”) you can expect a higher operating temperature and less fade than stock brake pads. They will also have a higher initial “bite” than the stock pad. The trade-off: moderate dust and moderate noise as compared to the stock pad which is low dust and low noise. Hawk advises that Super-Duty brake pad wear is comparable to the street brake pad
* The HB-487.733F brake pad listed for the ‘00-‘02 trucks is only available in “F” compound which is Hawk’s designation for Street. This compound is much like a stock Mopar pad.
Brake Bleeder Kit ( Round 3-tab Twist Reservoir Cap)
Kit includes: 2qt capacity tank and tubing for bleeder valve. MP-0113: $85.45
Metal Rectangular Adapter Plate
For older style rectangular reservoir. Includes clamping hardware.
MP-1105: $40.46
Brake ROTORS
FRONT BRAKE ROTORS
‘08-‘23, 4500/5500, 2WD/4WD 68415392AA: $235.00
‘09-‘18 , 2500/3500/3500CC
1BP00025AA: $159.95
‘03-‘08 , 2500/3500/3500CC
‘06-‘08 , 1500 Mega Cab
2AMV1050AA: $119.95
‘00-‘02 , 2500/3500
2AMV5230AA: $99.95
REAR BRAKE ROTORS
‘08-‘23, 4500/5500, 2WD/4WD
68415393AA: $189.95
‘09-‘18 , 2500/3500/3500CC
2AMV2184AB: $149.95
‘03-‘08 , 2500/3500/3500CC
‘06-‘08 , 1500 Mega Cab
2AMV0144AA: $129.95
‘00-‘02 , 2500 ‘01-‘02, 3500
2AMV9932AA: $114.00
Power Brake Bleeder Kits & Accessories
Brake Bleeder Kit ( Rectangular/Oblong Reservoir Cap) Kit includes: 2qt capacity tank, metal rectangular adapter plate, machined billet aluminum adapter cap and clamping hardware. MP-0105: $80.95
EXTRA ADAPTERS
Aluminum Adapter Round aluminum adapter for Chrysler Ram trucks.
MP-1113: $44.96
ACCESSORIES
16oz. Catch Bottle
Kit includes: 16oz. catch bottle with tubing to attach to bleeder valves.
MP-1810: $13.46
DOT 5.1 Hi-Performance Brake Fluid
AP_DOT_5.1 (500 ml/17 oz.): $11.95
DOT 5.1 fluid provides a high boiling point and relatively stable viscosity over a wide range of temperatures. It is also compatible with DOT 3 or 4 fluid and can be mixed without concern. We recommend two bottles to fill your truck’s brake system.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 18 Ram Turbo Diesel Parts & Accessories #121
SUSPENSION & BRAKES
STEERING,
H TDR43, p14-17
Front Manual Locking Hub Conversions
3500 DRW TRUCKS
‘12-‘18 SAST-D1215DRW: $1925.00
‘10-‘11 SAST-D1011DRW: $1925.00
‘09 SAST-D09DRW: $1925.00
‘00-‘08 SAST-D0008DRW: $1925.00
2500/3500 SRW TRUCKS
NOTE: Hubs will extend 5.75” past wheel mating surface.
‘12-‘18 SAST-D1215: $1700.00
‘10-‘11 SAST-D1011: $1700.00
‘09 SAST-D09: $1700.00
‘00-‘08 SAST-D0008: $1700.00
‘94-‘99 SAST-D9499: $1700.00 ( No ABS)
DUAL REAR WHEEL HUB KIT
HEAVY-DUTY 4WD Steering Dampers (‘00-‘23, 2500/3500)
‘14-‘23, RAM 2500
‘13-‘23, RAM 3500 & 3500 Cab & Chassis
68232449AC: $152.95
SINGLE REAR WHEEL HUB KIT
NOTE: ‘13-‘18 2500/3500 SRW truck (Bighorn or Longhorn) hub conversion will not work on trucks with OEM aluminum wheels with small Ram center cap without modifying the wheels. They need a minimum clearance of 4.224”.
With greater frequency we have listened as customers have asked for manual locking front hubs.
In recent Turbo Diesel Register magazines there have been articles on these products (Issue 82 and Issue 62) that discussed the pros and cons of this accessory, the primary benefit being reduced wear on the front drivetrain: the axle shafts and corresponding differential gearing are disengaged. Other benefits: fuel economy thanks to the elimination of 150-pounds of rotating mass, universal joint wear is all but eliminated and a user-serviceable set of wheel bearings.
We’re thrilled to offer you the SpynTec designed front manual hubs.
Front
‘13, RAM 2500
‘08-‘12, RAM 2500/3500 & 3500 Cab & Chassis
MOP-5154661AD: $129.95
2WD & 4WD Steering Dampers (‘08-‘23, 4500/5500)
4877184AA: $199.95
‘00-‘07, RAM 2500/3500, Cab & Chassis
MOP-52106909AG: $109.95
NOTE: If the Mopar steering upgrade has been performed, you’ll need the ‘08-‘13 steering damper.
‘98-‘99, RAM 2500/3500, 4WD MOP-52039280: $64.95 Eyelet to eyelet.
‘08-‘12, RAM 4500/5500, 2WD 52855623AG: $147.95
‘08-‘12, RAM 4500/550, 4WD 52013986AE: $175.00
Steering Dampers
Help dampen steering vibrations and restore the steering control of your ‘03-‘23 Dodge Ram truck.
B8 5100 DUAL STEERING DAMPER KIT
RAM 2500 (‘14-‘23, 2500 4WD) RAM 3500 (‘13-‘23, 3500 4WD) BIL-53-264817:
RAM 2500 (‘13, 4WD)
RAM 2500/3500, (‘08-‘12, 4WD)
BIL-33-170794: $106.00
Steering Box Stabilizer
RAM 2500/3500, (‘03-‘07, 4WD)
BIL-24-164870: $105.00
NOTE: If the Mopar steering upgrade has been performed, you will need the ‘08-‘13 steering damper.
4 WHEEL-DRIVE
‘03-‘22, 2500/3500 4WD BD-1032003: $263.95
‘94-‘02, 2WD BD-1032002: $244.95
‘94-‘02, 4WD BD-1032004: $244.95
2 WHEEL-DRIVE
BD’s Steering Box Stabilizer (SBS) eliminates steering wander and wobble caused by excessive shaft play in the steering box of late-model Dodge trucks. Designed for easy, bolt-in installation (about one hour). The SBS virtually eliminates frame flex at the steering box mounting point, resulting in more positive steering feel.
The BD SBS is black powder coated for corrosion resistance and features a greasable, high-quality bearing for reliable operation.
Order 770-886-2500 or genosgarage.com 19 Product prices subject to change without notice. STEERING, SUSPENSION & BRAKES
Brake Dust Shield - Front (‘03-‘08 2500/3500 4WD) Sold as a pair. DRM924228 $47.95
Brake Dust Shield - Rear (‘01-‘08 2500/3500 4WD with Disc Brakes) Sold as a pair. DRM924226 $97.95 DORMAN ABS Speed Sensor Front (‘09-‘13, 2500/3500 4WD) DRM970172 $48.95 DORMAN ABS Brake Sensor - Front (‘06-‘08) DRM970052 $39.95 DORMAN ABS Brake Sensor - Front (‘03-‘05) DRM970088 $41.95 DORMAN ABS Brake Sensor - Front (‘00-‘02) DRM695882 $42.95 DORMAN ABS Brake Sensor - Rear (‘98-‘05) DRM970024 $20.95 DORMAN ABS Brake Sensor - Rear (‘89-‘97) DRM970012 $15.00
DORMAN
DORMAN
‘10-‘21,
SAST-UJ68065428AC:
SPICER ‘03-‘09,
SAST-UJ5006813: $79.95 SPICER ‘94-‘02,
2500/3500 SAST-UJSPL55-3X : $69.95
Axle U-Joints NON-GREASABLE MOPAR/SPICER
Ram 2500/3500
$160.95
Ram 2500/3500
Ram
“BIG BORE xd” Steering Box –t-style linkage
PSC-SG851: $899.99
The second generation Dodge 2500/3500 4WD truck steering gears have always had failures to the lower sector shaft bearing and seals due to the single bearing design. PSC now offers a brand new extreme duty gear box replacement that offers a 45MM bearing and sector shaft to eliminate any side to side flex. The PSC Dodge XD steering gear features a 16:1 ratio for easier parking and 3.5 turns lockto-lock along with a modern variable valve for stable highway driving and effortless maneuvering.
NOTE: Does not work with aftermarket steering box braces.
NOTE: Due to the increased overall size of the BIG BORE XD steering box, spacers are included in the kit to space the gear box off the frame. There is a 1” difference from the OEM steering gear. We suggest trimming the draglink and tie-rod at the pitman arm 1/2” to clear for alignment.
NOTE: Reuses OEM pitman arm.
NOTE: Does not work with Synergy Steering linkage on stock height trucks.
18MM track bar BUSHINGS
‘13-‘22, 3500 4WD
‘14-‘22, 2500 4WD
EMF-BSHA-40082-18MM: $45.00 ea
2 required for each track bar.
16MM track bar BUSHINGS
‘7.5-‘12, 3500
‘7.5-‘13, 2500
EMF-BSHA-40082-16MM: $45.00 ea NEW!
2 required for each track bar.
Note: 2007 Models built after 3/18/07
POWER
Power steering pressure and return line assemblies meet or exceed the OE assembly in fit, form, quality, and function.
REPLACEMENT TRACK BAR BUSHINGS (‘94-‘12)
‘08-‘12 RP22442: $24.95 each ‘94-‘02 RMTB105: $18.33 each Works with RP2844 and RP28442G2. Fits like OEM. 2 required.
Luke’s Link Replacement Track bar Bushings
‘03-‘07 - RED BUSHINGS
LUKESLINK_BUSHINGKIT2: $42.00/pair
NOTE: Fits 2007 trucks built prior to 3/18/2007.
‘94-‘02 - BLACK BUSHING
LUKESLINK_BUSHING_IND: $18.00
(Only 1 bushing required.)
One of the weakest points on the ‘94-‘07 Ram 4WD truck suspension is the track bar and tie rod ends. Install these polyurethane bushings to tighten up the bar-to-frame connection.
Luke’s Link Track bar & Tie-Rod End Rebuild Kit (‘94-‘02, 4WD only)
INDIVIDUAL LUKESLINK_TBRKIT: $72.00
SET OF 4 LUKESLINK_TBRKIT: $249.95
Use Luke’s Link’s heavy-duty kit to rebuild ‘94-‘02 track bars and tie-rod ends to better than new. The installation of this kit should last the life of the truck. It is greaseable and adjustable if it ever comes loose.
Luke’s Link will also rebuild any of the four tie-rod ends.
NOTE: Does not work on trucks with MOOG track bars. Will not fit over 2-1/16” diameter bar.
Direct bolt-on. No conversion brackets to install.
DIRECT REPLACEMENT
ADJUSTABLE
TRACK BAR (‘94-‘02)
RP28444G2: $276.64
Best Seller!
Rare Parts Inc manufactures this direct replacement, adjustable heavy-duty track bar for Dodge Ram trucks. Pregreased with synthetic lubricant. Cutaway shows design of track bar end.
TRACK BAR 4500/5500 (‘08-‘23)
68248930AA: $245.95
Power Steering Return Line Hose
‘94-‘96 Return Line (Order 2ft.)
‘97-‘02 Return Line - Gear to Pump (Order 2ft.)
‘97-‘02 Return Line - Hydroboost to Pump (Order 2ft.)
‘89-‘90 250/350 Return Line Assembly - 2WD & 4WD
GATES-349960: $3.95 Sold per foot.
GATES-363540 $21.95
RAM 2500/3500 LINKAGE
Three #6505623AA linkage kit nuts included with this kit.
NOTE: Also fits ‘00-‘02, but may interfere with an aftermarket diff cover.
NOTE: For 2003 to 2008 model trucks. If replacing the steering linkage or drag link inner tie rod assembly at the pitman arm on a vehicle built before February 14, 2008, verify that the pitman arm part# is 68039930AA. If not, it must be replaced with our part 68039930AA. 2000 to 2002 model trucks will re-use the factory original pitman arm.
NOTE: Steering damper sold separately. ‘00-‘07 model trucks will need the ‘08-‘12 steering damper.
STEERING PITMAN ARM, (‘03-‘08, 2500/3500)
68039930AA: $99.95
Direct replacement part for a worn or bent center link. Eliminates loose steering and alignment issues related to a worn pitman arm.
20 Ram Turbo Diesel Parts & Accessories #121 Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 19 STEERING, SUSPENSION & BRAKES
‘03-‘07
‘94-‘02
Factory hardware is reused to install the bushings.
STEERING line & FITTINGS
‘03-‘07, 5.9L 2500/3500 Hose Assembly - Pump to Hydroboost - ‘06-‘07, 2WD GATES-365941:
‘97-‘02, 2500/3500 Pressure Line Assembly
Pump
Hydroboost GATES-352440:
Pressure Line Assembly - Hydroboost to Gear GATES-352340:
‘94-‘02, 2500/3500 Power Steering
GATES-350230:
‘94-‘96 Pressure Line Assembly GATES-362910:
‘94-‘02 11/32”
$118.95
-
to
$31.95
$33.95
End Fitting, Return
$10.95
$23.95
NOTE: A Borgeson Steering Shaft (BORG-000950 or BORG-000945 ) is recommended for the installation of this steering box.
REMAN Steering Box (‘94-‘02 4WD)
BORG-800112A: $449.00
The 800112 steering box offered for ‘94-‘02 trucks is a remanufactured unit.
Your truck’s original steering box was engineered in the 1960s, called a Series 700, and was made by Delphi. The replacement unit is also made by Delphi, but it was designed in the 2000s and it is called a Series 680. So what makes the Delphi Series 680 a better mousetrap?
• Modern internal valving provides a variable assist feel to the driver’s steering input. The further you turn the wheel the greater the assist. The benefits to you: the power assist is limited in the centered position to help the vehicle track straight on the highway.
• The Borgeson replacement steering box is a 16:1 ratio. The benefit to you: effectively 3.5 turns from lock-to-lock compared to 4.5 turns.
• Larger internal piston diameter (80mm) for greater power assist.
• Larger diameter bearings support the output/Pittman shaft.
• Frame spacers included.
If you use a Borgeson Replacement Steering Shaft (part numbers 000950 or 000945), the steering box installation is a simple bolt-inplace operation. The Borgeson box and shaft are a full-circle spline design.
To use the steering box with your truck’s existing steering shaft (a female, D-shaped spline design), the Borgeson input shaft adapter (male, O-shaped) will have to be cut-down with a grinding wheel.
High-Flow Power Steering Pump (‘94-‘02)
BORG-800328: $194.00
Second Generation truck owners take note: Are you looking for a power steering pump that gives better performance than the OEM unit at a lower price?
The Borgeson power steering pump is a direct replacement for ‘94-‘02 Dodge Turbo Diesel 2500 and 3500 trucks. Pump output pressure/flow is increased from 1,450 psi to 1,550 psi and from 3.5 gpm to 4.5 gpm.
steering box braces.
NEW! NOT REBUILT!
1-year manufacturer warranty.
Borgeson has sourced and adapted a brand new Delphi 684 series power steering box for the ‘03-‘20 Ram trucks. The Borgeson/Delphi 684 series “Dodge Box” offers the largest piston diameter for the most available power assist and a modern variable valve for stable highway driving. Steering gear features a 16:1 ratio for 3.5 turns lock-to-lock.
Fits all OEM and dropped pitman arms. Uses OEM pitman arm.
MAGNAFINE INLINE POWER STEERING FILTER
MF-3810000: $19.95
This filter provides dual filtration that helps protect and improve the performance of your power steering system. As the fluid passes through the filter a powerful internal magnet attracts all the damaging ferrous particles while the secondary filtration media removes the remaining non-ferrous materials down to 3 microns.
The filter installs inline on the return-to-pump line of the power steering system. It has an internal bypass if it becomes overrun past its service life of 10 to 30 thousand miles. It is recommended to protect and extend the life of the power steering system.
Depending on usage, the Dodge Ram steering coupler can show signs of wear in as little as 50,000 miles. This wear, which causes play in the truck’s steering, is even more noticeable if your truck is used for plowing, towing or if oversized tires have been installed. Replacing the worn steering shaft with another OEM shaft only gives you a temporary fix. Borgeson has replacement steering shaft assemblies with precision needle bearing u-joints available for ‘79-‘19 Dodge Ram trucks.
Power Steering Hose Kits
An OEM-style rubber hose kit for ‘94-‘02 Dodge ram trucks. If you are installing a new power steering pump, it is a good idea to replace the power steering hoses to avoid contamination of the new pump. Kits include pressure and return hoses and all clamps.
Replacement Steering Shaft (‘14-‘19, 1500 2WD/4WD)
Replacement Steering Shaft (‘03-‘12, 2500/3500 2WD & ‘03-‘13, 1500 2WD/4WD)
Replacement Steering Shaft (‘03-‘08, 4WD)
Replacement Steering Shaft (‘95-‘02)
Replacement Steering Shaft (‘94)
Replacement Steering Shaft (‘79-‘93)
Steering column with removable Rag Joint Flange. Full-Size Dodge with 2 U-Joints
Replacement Steering Shaft (‘79-‘93)
Full-Size Dodge with fixed Rag Joint Flange
Replacement Rubber Rag Joint Disk (‘79-‘93)
4WD)
$336.00
$336.00
$336.00
$282.00
BORG-000950: $282.00
BORG-000945: $282.00
BORG-000943: $246.50
BORG-000940: $196.50
BORG-000941: $17.50
Order 770-886-2500 or genosgarage.com 21 Product prices subject to change without notice. STEERING, SUSPENSION & BRAKES
1997-2002 Hydro-Boost Brakes BORG-925117: $104.50
1994-1996 Vacuum Brakes BORG-925116: $64.50
‘79-‘93 w/U-joints ‘95-‘02
Steering Shafts
Replacement Steering Shaft (‘14-‘19, 2500 2WD, ‘13-‘19, 3500 2WD, ‘09-‘19, 2500/3500
BORG-000954:
APPLICATION
BORG-000953:
BORG-000952:
BORG-000951:
‘03-‘08 shown.
This power steering pump includes the Magnafine filter MF-3810000.
NEW! NOT REBUILT!
When
replacing the power steering pump, steering box or hoses, it is mandatory to flush the power steering system and to bleed the system. Failure to do so will result in damage to these parts and void the manufacturer warranty. Instructions on how to bleed the power steering system are included.
STEERING,
HOW TO CORRECT YOUR TRUCK’S STEERING WOES
Front SwaY Bar End Links (‘00-‘22, 2500/3500)
‘13-‘22 BD-1032052: $185.95
‘10 -‘12 BD-1032051: $185.95
‘00-‘09 BD-1032050: $185.95
Due to the heavy demands put on the ‘00-‘21 Ram 4WD 2500/3500 pick-ups, the front sway bar end links are prone to wearing or even breaking when the truck is lifted due to the stress of the axle dropping.
BD’s Sway Bar End Links have a Dual Pivot Design that allows for greater amount of articulation and less stress. Long life urethane bushing design allows for greater flex without breaking and won’t seize due to the elements. NOTE: Designed for use on trucks with stock or up to a 3” lift.
Adjustable Track Bar Kits (‘94-‘23)
‘03-‘12, 2500/3500 4WD ‘ 94-‘02, 4WD
BD-1032013: $378.95
‘14-‘22, 2500 4WD
‘13-‘22, 3500 4WD
BD-1032018: $378.95
BD-1032011: $557.95
Download the ‘TDR Buyer’s Guide’ in the Technical Information section of our website for more details.
Sway Bar END Links
FRONT - STANDARD HEIGHT TRUCKS
‘13-‘22, 3500 4WD & ‘14-‘21, 2500: SMX-1315: $169.99
9/16” stud. 5.5” center to center.
‘03-‘12, 2500/3500 2WD w/IFS: SMX-1229: $159.99
7.5” center to center.
‘11-‘12, 2500/3500 4WD & ‘13, 2500: SMX-1311: $125.99
9/16” stud. 4.5” center to center.
‘06-‘10, 4WD including 1500 Mega Cab: SMX-1227: $125.99
9/16” stud. 4.5” center to center.
‘03-‘05, 4WD: SMX-1226: $125.99
10mm stud with taper. 4.5” center to center.
‘00-‘02, 4WD: SMX-1225: $125.99
12mm stud with taper. 4.5” center to center.
‘98-‘99, 4WD: SMX-122445: $125.99
12mm stud with taper. 4.5” center to center.
‘95 (April)-‘97, 4WD: SMX-1224: $125.99
12mm stud with taper. 3.5” center to center.
‘94-‘95 (March) 4WD: SMX-1222: $99.50
12mm short stud. 3.5” center to center.
FRONT - TRUCKS WITH LIFT KITS (up to 3” lif t )
‘13-‘22, 3500 4WD & ‘14-‘21, 2500 4WD: SMX-1315L:
9/16” stud. 6” center to center.
‘11-‘12, 2500/3500 4WD & ‘13, 2500: SMX-1311L:
9/16” stud. 6.5” center to center.
‘06-‘10, 4WD including 1500 Mega Cab: SMX-1227L:
9/16” stud. 5.5” center to center.
‘03-‘05, 4WD: SMX-1226L: $125.99
10mm stud with taper. 5.5” center to center.
‘00-‘02, 4WD: SMX-1225L: $125.99
12mm stud with taper. 5.5” center to center.
‘98-‘99, 4WD: SMX-122455: $125.99
12mm stud with taper. 5.5” center to center.
‘95 (April)-‘97, 4WD: SMX-1224i: $125.99
12mm short stud with taper. 3.0” center to center.
‘94-‘95 (March) 4WD: SMX-1222i: $119.99
12mm short stud. 3.0” center to center.
REAR - STANDARD HEIGHT TRUCKS
With the OEM ball joint design on ‘94-‘12 trucks, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded “Death Wobble.” BD’s Track Bar is a good solution for steering stability and is a great complement to BD’s Steering Box Stabilizer. Plus, it is adjustable to accomodate up to 3”-4” lifts.
REPLACEMENT BUSHINGS, (‘94-‘12, 2500/3500)
BD-1302033-1: $45.95
Replacement poly bushings for BD Adjustable Track Bar Kits 1032013 and 1032011. ‘07-‘12 truck will require use of one or both steel sleeves included in this bushing kit.
FRONT axle bump stops (‘08-‘23, 4500/5500, 2WD & 4WD)
68480876AA: $12.95
Sold individually.
Control Arm Bump Stop
2WD (‘03-‘13, 2500/3500) 52113300AB: $40.95
2WD (‘94-‘02, 2500/3500) 52087636AC: $22.95
Eliminate suspension “crash” by replacing worn out bump stops with a set of OEM bump stops. Sold individually.
‘07-‘12, 2WD & 4WD 4500: SMX-7382: $159.95
‘94-‘02, 4WD w/Factory Sway Bar: SMX-7371: $169.99
These sway bar links are self aligning and constantly preloaded, maintenance free, and impervious to salt and debris. MAXX Links replace the wear-prone stabilizer link completely.
The sway bar end link kit contains:
• Two link pin axle studs manufactured from heat treated 4140 alloy steel
• Four high-performance urethane bushings
• Two vertical bolts sleeves
• Sway bar end link bushings
• All fasteners
FRONT SWAY BAR END LINK (‘08-‘23, 4500/5500, 2WD & 4WD)
68020464AC: $49.95
Sold individually.
FRONT SWAY BAR FRAME MOUNT BUSHING (‘08-‘23, 4500/5500, 2WD & 4WD)
55398037AD: $84.95
Sold individually.
Get
technical information at our website: https://www.genosgarage.com/tech_info 22 Ram Turbo Diesel Parts & Accessories #121
Ram Cummins
BRAKES
SUSPENSION &
FRONT ‘13-‘22, 4WD
FRONT ‘03-‘05, 4WD
REAR ‘07-‘12, 2WD & 4WD
FRONT ‘00-02, 4WD
‘00-‘12
‘13-‘22 Sway Bar End Links sold as a pair.
Rebuildable ball joint kits include:
Upper and lower ball joints, adjustable spanner wrench and allen wrench.
‘14-‘22, 2500 4WD
‘13-‘22, 3500 4WD With radius arm
STANDARD
EMF-6821-7460S-KIT: $675.00
OVERSIZED
EMF-6821.1-7460S.1-K: $675.00
REBUILDABLE BALL JOINTS
Ball joint replacement: There aren’t many truck projects that are as unpleasant. It is a dirty, difficult and time consuming job.
The Turbo Diesel Register has covered the subject and the most recent article was in Issue 91, pages 16-18. The conclusion: Make your first ball joint replacement your last.
To accomplish that goal, you need a rebuildable ball joint. The folks at EMF (Evolution Machining and Fabrication) have developed “a better mousetrap.”
Here is the sales pitch: EMF is a small specialty shop. They make rebuildable Heim joints, rod ends, tie rods and ball joints. EMF has several U.S. and Canadian patents.
‘10-‘13, 2500 4WD
‘10-‘12, 3500 4WD
STANDARD
EMF-7467L-7460: $625.00
OVERSIZED
EMF-7467L-7460.1: $625.00
The EMF Ball Joint has a removable race and pin (part of their patent). Competitive products have a removable pin, however the inside of the housing will wear as the pin wears resulting in the inevitable replacement of the entire unit. By having the internal race and pin set on the EMF ball joint, the race will act as the wear point instead of the housing body creating a long lasting unit.
Over time, the ball joint pin and races will wear and when it gets to the point where the play can’t be removed by tightening it anymore – that’s when you rebuild it. You don’t have to remove the ball joint from the knuckle – you can rebuild them right on the truck.
They are also greaseable so you can just pump a couple squirts of grease into it around every oil change and go.
18MM track bar BUSHINGS
‘03-‘09, 2500/3500 4WD
STANDARD
EMF-7467-7460: $625.00
OVERSIZED
EMF-7467.1-7460.1: $625.00
‘13-‘22, 3500 4WD
‘14-‘22, 2500 4WD
EMF-BSHA-40082-18MM: $45.00 ea
2 required for each track bar.
16MM track bar BUSHINGS
‘7.5-‘12, 3500 ‘7.5-‘13, 2500
EMF-BSHA-40082-16MM: $45.00 ea NEW!
2 required for each track bar.
Note: 2007 Models built after 3/18/07
‘00-‘02, 2500/3500 4WD
STANDARD
EMF-7397-7394: $625.00
OVERSIZED
EMF-7397.1-7394.1: $625.00
INTERMEDIATE SHAFT BUSHINGS
‘03+, 1500/2500/3500/4500 2WD &4WD
EMF-DSB-3999: $19.95 pair
One of the steering problems we found on our Ram Turbo Diesel trucks is that the little bushing on the intermediate steering shaft can wear allowing movement within the shaft.
An inexpensive fix to this problem is a bushing that can be pressed into the collar.
This bushing is machined out of aluminum and has a tapered end to allow for ease of installation. The whole process takes about 5 minutes to install, is extremely inexpensive and works wonders for your steering column.
‘94-‘99, 2500/3500 4WD
EMF-80026-8607: $640.00
NOTE: Before ordering shaft bushings, please inspect the bushing housing on the end of the steering shaft. It should look like this photo.
Order 770-886-2500 or genosgarage.com 23 Product prices subject to change without notice. STEERING, SUSPENSION & BRAKES
Front End Control Arm Bushing Set, 4WD
‘03-‘09, 2500/3500
ES_53142G: $167.90
(To check proper fit, see website for dimensions.)
‘99-‘02, 2500/3500*
ES_53131G: $146.73
‘99-‘02, 2500/3500*
‘94-‘99, 2500/3500
ES_53120G: $144.37
kits. It depends on the diameter of the bottom mounting bolt. If the bottom mounting bolt is 9/16” you will need 5.3120G. If the bolt is 5/8” you will need the 5.3131G kit.
NOTE: Does not include frame shackle bushings.
REAR Leaf Spring Bushing SetS
‘03-‘09, 2500/3500 4WD ES_52118G: $145.81
3” wide rear spring with 1-11/16” ID main eye.
‘94-‘02, 2500 2WD
‘94-‘98, 2500 4WD
‘94-‘02, 3500 2WD
‘94-‘98, 3500 4WD ES_52119G: $104.21
Ram 2500/3500 Air Bag Kit
2.5” wide rear spring with 2.5” ID main eye.
‘94-‘02, 2500/3500 2WD & 4WD
‘94-‘01, 1500 2WD & 4WD ES_52109G: $90.34
Sway Bar Frame Bushings
‘94-‘12 (34MM ) ES_55159G: $29.01**
‘94-‘12 (33MM ) ES_95186G: $33.72*
‘94-‘12 (32MM ) ES_55126G: $33.18
‘94-‘12 (30MM ) ES_55127G: $33.62
NOTE: Measure sway bar diameter before ordering. Bushings not available for all sizes.
**NOTE: Replacement metal brackets and washers not included with 34mm kit. You must re-use OEM brackets and washers.
*NOTE: End link bushings not included with 33mm kit. Sold separately.
Cab Mount Bushing Set
‘03-‘05, 2500/3500
2.5” wide rear spring with 1.75” ID main eye.
‘94-‘02, 2500/3500 2WD & 4WD ‘94-‘01, 1500 2WD & 4WD ES_52111G: $77.73
RAM 2500/3500 Air Bag Kits
‘19-‘22, 3500 (2WD/4WD) HP10368: $329.75
‘14-‘22, 2500 (2WD/4WD)
HP10206: $319.36
‘03-‘13, 2500 (4WD)
‘03-‘18, 3500 (4WD)
‘06-‘08, 1500/2500/3500 ( Mega Cab)
‘07.5-‘18, 3500 (2WD/4WD)
Cab & Chassis Requires HP10136
HP10002: $3.17.13
AXLE BREATHER RELOCATION KIT
‘07-‘09, RAM 3500 (Cab/Chassis)
HP10136: $17.06
‘14-‘18, 3500 (2WD)
‘03-‘13, 2500/3500 (2WD)
HP10089: $390.14
‘89-‘02, 2500/3500 (2WD/4WD) HP10019: $295.57
‘19-‘20, 1500 (4WD) ‘09-‘18, 1500 (4WD) ‘19, 1500 Classic (4WD) HP10336: $341.20
AIRBAG IN-CAB CONTROL KIT FOR AIRBAG KITS
Kit includes paddle switches, mechanical air pressure gauge, 12 VDC air compressor, wiring harness and install hardware. HP10098: $395.86
Sway Bar End Link Bushing
‘94-‘18, 2500/3500 ES_8084G: $1.50 Sold individually.
2WD & 4WD Regular Cab
ES_54116G: $302.91
‘03-‘05, 2500/3500
2WD & 4WD Quad Cab
ES_54115G: $402.35
‘94-‘02, 2WD & 4WD Regular Cab
ES_54107G: $147.89
‘94-‘02, 2WD & 4WD Quad or Extended Cab
ES_54109G: $193.69
Motor Mount REINFORCEMENTS
ES_51116G: $60.93
Motor
Pacbrake’s air springs allow you to level out your truck’s stance for any towing/hauling situation. The product’s design gives you the ability to adjust the amount of air in each spring.
The standard manual fill kit gives you easily accessible fill valves located near the rear license plate on your truck.
It is important to note that by installing an air suspension kit, the max load capacity (GVWR) does not increase.
NOTE: Even though we have rarely seen this, some vehicles equipped with 5th wheel hitches require brackets to be mounted to the frame in the same locations as the air spring brackets (if this is the case, modifications of the 5th wheel hitch brackets may be required to mount this kit).
WIRELESS AIR SPRING CONTROLS
Apple iOS & Android HP10325: $620.11
Pacbrake Wireless Air Spring Controls give you the ability to adjust your air spring pressure from your phone with the touch of a button.
• Easy to use app reads real time pressure.
• Military grade solenoids designed to withstand extreme environments.
• Controller is waterproof and debris resistant.
• Accessible components offer ease of service and parts replacement.
• Pre-assembled plug-and-play harnesses for easy install.
• Includes air lines, pressure connectors and mounting hardware.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 24 Ram Turbo Diesel Parts & Accessories #121
SUSPENSION & BRAKES
STEERING,
‘98.5-‘02, 24V
‘94-‘98, 12V
ES_51114G: $71.52
mount inserts sold in Black only.
These are not replacement bushings, just reinforcements.
NOTE:
‘03-‘09, 2500/3500 ( FRONT )
$40.89
2500/3500
REAR)
FRONT
*NOTE: ‘99-‘02 model trucks can use either 5.3131G or 5.3120G
Axle Bump Stops, 4WD
ES_59105G:
‘03-‘09,
(
ES_59104G: $105.64
REAR
Cab Fresh Filter KitS
Cab Fresh Filter Kit (‘19+, 2500/3500/4500/5500)
CFF-DG-19020K: $65.95
Cab Fresh Filter Kit (‘10-‘18)
CFF-DG-19009K: $59.95
Cab Fresh Filter Kit (‘03-‘09)
CFF-DG-19003K: $59.95
Cab Fresh Filter Kit (‘94-‘02) V
CFF-DG-0610K: $56.95
Replacement Filters (‘19+, 2500/3500/4500/5500)
CFF-DG-19020R: $19.00
Replacement Filters (‘10-‘18)
CFF-DG-19009R: $19.00
Replacement Filters (‘03-‘09)
CFF-DG-19003R: $19.00
Replacement Filters (‘94-‘02)
CFF-DG-0611R: $17.00
This easy to install dual-stage filtering system helps remove dirt and dust and keep it from getting into the interior of your truck. It fits over the factory vents underneath the hood.
OEM ENGINE BLOCK HEATER and cables
INTERIOR Cabin AIR Filter Kit (‘10-‘18)
CABIN AIR FILTER KIT HEPA CABIN AIR FILTER KIT NEW!
GG-CFF1012: $32.95
GG-CFF1012HEP: $32.95
REPLACEMENT CABIN FILTERS (‘10-‘18)
‘10-‘18 CARBON NA-4578: $14.95
‘10-‘23 OEM PAPER 68548579AA: $21.95
‘10-‘23 HEPA 6090CRBE: $14.95
Are you getting poor airflow from the HVAC system or are you simply wanting to keep the interior dust-free in your truck? Add this cabin air filter with carbon filter prior to the HVAC blower motor box to keep the honeycomb grill that covers it free of blockage caused by excess dust. Installing this filter is an easy project. To install the filter into the interior air box requires the use of either a hot butter knife (box cutter heated with a torch), a Dremel tool with a cut-off wheel, or a small saw blade to cut the opening shown in the included instructions. Our installation instructions describe the steps in detail. You’ll cut out an opening in the dash, slip the filter into the slot, and close it off with a Mopar filter door.
NOTE: Some ‘16-‘18 trucks may already have the filter kit installed. You may only need a replacement filter. Check before ordering. All 2019-newer trucks have the filter kit installed from the factory.
HEATER CABLE PLUG COVER, ‘89-’23
360-0012: $5.95
Help keep the elements out of the heater cable connection.
‘89-‘98, 12V GG-3500030: $76.95
‘98.5-‘23, 5.9L & 6.7L 24V GG-3500022: $59.95
cummins ENGINE BLOCK HEATERS
CUMMINS ‘89-‘98, 12V 3916127: $118.95
CUMMINS ‘98.5-‘23, 5.9L & 6.7L 3975628: $52.95
These engine block heaters are threaded directly into the engine block on the passenger side. Rated at 750w.
NOTE: Before ordering this product double-check to see which engine block heater your truck is equipped with. There is some overlap of years where the ‘94-‘98 Turbo Diesel trucks use either of the engine block heaters.
Cummins Engine Block Heater Cables
‘89-‘23, 2500/3500/4500/5500 ‘14-‘21, 5.9L & 6.7L (6ft. cable.) Ram 1500 EcoDiesel (5ft. cable.)
HEATER_CABLE_FL: $24.95 ECO_ HEATER_CABLE_FL: $19.95
Don’t be left out in the cold! Make sure your Ram Turbo Diesel has a block heater cable so you can warm the engine for easy starting in cold weather.
The engine has the block heater installed, but many times the dealers did not order the engine block heater cable with the trucks.
PlugS
Block Heater Bumper
‘19-‘23 2500/3500 6.7L
WD-BHP-20: $55.95
(Cutting of lower bumper plastic grille required for installation.)
‘10-‘18
WD-BHP-10: $53.95
‘03-‘09
WD-BHP: $53.95
‘94-‘02 NON-SPORT
WD-BHP9402: $53.95
‘89-‘23 Universal Fit (Plug only.)
WD-BHPPL: $43.95
(This kit does not include mounting brackets. Fits Ram Cummins and Powerstroke trucks.)
‘89-‘23 Universal Fit (Plug with mounting brackets)
WD-BHPUNI: $53.95
(This kit fits Ram Cummins and Powerstroke trucks with aftermarket bumpers.)
Install an Excelsior Block Heater Bumper Plug on your truck, and you have the heater connection located in a fixed position right up front behind a flip-open, weatherproof cover. To install, remove the old block heater cable from the engine block and plug the new cable in.
*NOTE: Will not work on ‘14-‘23 Ram 1500 EcoDiesel trucks.
Order 770-886-2500 or genosgarage.com 25 Prices subject to change without notice. CABIN FILTERS & KITS/ENGINE BLOCK HEATER & ACCESSORIES
Installs in front bumper.
‘10-‘18 style shown.
The Block Heater Bumper Plug has the heater cable attached for quick and easy installation.
‘03-‘09 shown.
Best
Attention 4G Owners:
Seller!
V I H TDR74, p48-49
These radiators are made to OEM specs or better.
RADIATORS (‘94-’09)
‘03-‘09, 5.9L & 6.7L 2500/3500 GPD-2711C: $249.95
Plastic tanks, aluminum core, crossflow
5.9L 2500/3500 GPD-1553C: $269.95
Plastic tanks, aluminum core, crossflow
Due to oversize shipping, additional shipping charges will apply. Replace a clogged or leaking radiator in your Ram Turbo Diesel truck with an OEM-style quality replacement. Direct fit so you’re not having to try to make a generic size radiator fit.
COOLING FAN BLADE
‘13-‘18, 6.7L 2500/3500/4500/5500
DRM621592: $128.95 Plastic
‘10-‘12, 6.7L 2500/3500/4500/5500
DRM620058: $137.95 Plastic
‘08-‘10, 6.7L 3500/4500/5500 Chassis Cab
‘03-‘09, 5.9L & 6.7L 2500/3500
DRM620065: $119.95 Plastic
‘90-‘02, 5.9L
DRM620066: $119.95 Steel
Replace your damaged cooling fan blade with this direct fit replacement. It is is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.
AFTERMARKET COOLING FAN & EXTENSION ADAPTER (‘94-’02)
FAN-9402: $326.95
Mopar has discontinued its cooling fans for the ‘89-‘02 Turbo Diesel trucks. Those looking for a replacement end up paying a hefty sum for a used one.
This fan is similar to the metal hub with plastic blades fans used in the 2003 and newer Ram trucks. This fan has nine blades instead of seven like the original. The original fan was 22” in diameter and this new model is 20” which flows 39% more compared to the OEM fan.
The fan blades are thicker than the original and come back closer to the engine. Therefore, the fan will not work with trucks with aftermarket harmonic dampers and other accessories protruding from the front of the engine without the use of the included spacer. Made in the U.S.A. and comes with a one-year manufacturer warranty.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 26 Ram Turbo Diesel Parts & Accessories #121 MOPAR Constant Tension Flat Band Clamp ‘03-‘09 Upper Hose, small end only ‘94-‘02 Lower Hose, small end only ‘89-‘93 Lower Hose, both ends ‘89-‘09 55111033AA $4.95 MOPAR Constant Tension Flat Band Clamp - ‘89-‘02 Upper Hose ‘89-‘02 55037660AA $7.95 MOPAR Fan Clutch 2500/3500/4500/5500 Left hand thread. ‘19-‘23 68359842 $326.00 2500/3500/4500/5500 Right hand thread. ‘13-‘18 52014729AC $370.00 ‘94-‘09 2500/3500 ‘08-‘10 3500/4500/5500 C&C Right hand thread. ‘04.5-‘10 55056990AC $449.00 ‘03-‘04 2500/3500 Right hand thread. ‘03-‘04 52028879AF $399.00 GPD Fan Clutch ‘10-‘12, 2500/3500 ‘11-‘12, 3500/4500/5500 C&C Replaces Mopar 68155609AB NEW! GPD-2911374 $280.00 GPD Fan Clutch (‘00-‘02, 24V) Left hand thread. GPD-2911361 $94.95 GPD Fan Clutch (‘90-‘99, 250/350/2500/3500) Left hand thread. GPD-2911269 $72.95 MOPAR Fan Clutch (‘91.5-‘98, 12V) Left hand thread. 52028760 $216.95 GATES Fan Hub Assembly ‘13-‘18 FB1022 $269.95 ‘03-‘12 FB1001 $196.95 ‘94-‘02 FB1002 $190.95 CUMMINS Fan Hub Pulley (‘94-‘02, 5.9L) 3914460 $93.95 Fan Hub Bearing (‘89-‘23) OEM NSK-BD35 $59.95 CUMMINS 3910739 $189.95 DORMAN A/C Bypass Pulley (‘96-‘02) DRM34229 $58.95 CUMMINS Lower Radiator Inlet Hose Adapter Ring Seal (‘89-‘22) For inlet hose to engine block. 3906697 $4.25
ENGINE COOLING PARTS/ACCESSORIES
Fan Clutch electrical repair connectors available on page 46.
‘94-‘02,
Order 770-886-2500 or genosgarage.com 27 Product prices subject to change without notice. ENGINE COOLING PARTS/ACCESSORIES
Water Pump (‘19-‘23, 6.7L) Includes replacement water pump O-ring. 68569196 $439.00
Water Pump (‘13-‘18, 6.7L) *Post-recall design Includes replacement water pump O-ring. 5521882 $52.95 CUMMINS Water Pump (‘89-‘12) Includes replacement water pump O-ring. 5473238 $252.95 GATES Water Pump (‘13-‘18, 6.7L) Includes replacement water pump O-ring. GATES-42133 $73.95
Water Pump (‘07.5-‘12, 6.7L) Includes replacement water pump O-ring. GATES-42291 $79.95
Water Pump (‘98.5-‘07, 5.9L 24V) Includes replacement water pump O-ring. GATES-43526 $50.95 GATES Water Pump (‘89-‘98, 12V) Includes replacement water pump O-ring. GATES-41181 $51.95
PROOF DISEL Water Pump (‘89-‘22, 5.9L & 6.7L) Billet Aluminum Made in the USA NEW! BP90201228 $399.95 MOPAR Water Pump to Engine Seal (‘89-‘23, 5.9L & 6.7L) 3906698 $5.95 DORMAN Pressurized Coolant Reservoir (‘13-‘18, 6.7L 2500/3500/4500/5500) Level sensor included. Coolant reservoir cap included. DRM603839 $145.95 MOPAR Coolant Reservoir With coolant level sensor. ‘13-‘18 2500/3500 ‘13-‘18 3500/4500/5500 C+C 68166475AD $177.95 DORMAN Non-Pressurized Coolant Reservoir ‘04.5-‘09, 5.9L & 6.7L, 2500/3500 DRM603317 $63.95 DORMAN Coolant Reservoir (‘93-‘02) DRM603775 $51.95 DORMAN Coolant Reservoir Cap ‘91.5-‘09 2500/3500 ‘08-‘10 3500/4500/5500 C+C DRM54201 $7.95 MOPAR Coolant Reservoir Cap ‘13-‘23 2500/3500 ‘13-‘23 3500/4500/5500 C+C 68442532AA $18.95 MOPAR Coolant Level Sensor (‘13-‘18, 2500/3500/4500/5500) 68354536AA $15.95 MOPAR 200° OEM Thermostat & Seal Kit (‘10-‘12, 6.7L) * Replaces Cummins 5292724 68067109AB $64.00 CUMMINS 190° OEM Thermostat & Seal Kit (‘07.5-‘09 & ‘13-‘23, 6.7L) 5627589 $50.95 CUMMINS 190° OEM Thermostat & Seal Kit (‘03-‘07, 5.9L) 5292744 $63.95 CUMMINS 190° OEM Thermostat & Seal Kit (‘98.5-‘02, 5.9L) 3946849 $63.95 CUMMINS 180° OEM Thermostat & Seal Kit *Alternate thermostat for ‘98.5-‘23 5.9L & 6.7L engines. 5292708 $38.95 CUMMINS 180° OEM Thermostat & Seals Kit (‘94-‘98, 12V) 3928499-KIT $66.95 CUMMINS 180° OEM Thermostat & Seal Kit (‘89-‘93) 5292738-KIT $61.95 CUMMINS OEM Thermostat Seal (‘03-‘23) 3954829 $6.25 GATES 190° Stock Thermostat & Seal Kit (‘98.5-‘09 & ‘13-‘23, 5.9L & 6.7L) GATES-33915 $23.95 GATES 180° Stock Thermostat & Seal Kit (‘98.5-‘09 & ‘13-‘23, 5.9L & 6.7L*) *Alternate thermostat for ‘98.5-‘23 5.9L & 6.7L engines. GATES-33956 $28.95 GATES 200° Stock Thermostat & Seal Kit (‘10-‘12, 6.7L) GATES-34212 $26.95 GATES 180° Stock Thermostat & Seals Kit (‘94-‘98, 12V) GATES-33888-KIT $36.95 GATES 180° Stock Thermostat & Seal Kit (‘89-‘93) GATES-33758-KIT $10.95 GATES 18 psi Radiator Cap (‘11-‘12) GATES-31525 $4.95 MOPAR Radiator Cap (‘94-‘10, 5.9L & 6.7L) 4596198 $23.95
MOPAR
CUMMINS
GATES
GATES
BULLET
RADIATOR HOSES & HEATER HOSES
6.7L) Cut to fit application.
GATES - 5/8” Molded Heater Hose - Heater to Pipe 1 (‘03-‘07, 5.9L) Cut to fit application.
$12.95
$14.95
GATES - 5/8” Molded Heater Hose - Heater to Pipe 2 (‘03-‘07, 5.9L) Cut to fit application. GATES-19213: $8.95
GATES - 5/8” x 16” Molded 90° Heater Hose (‘98.5-‘02, 24V) Cut to fit application.
GATES - 9/32” Molded Coolant Bypass Heater Hose (‘94-‘98, 12V) Cut to fit application.
GATES - 5/8” Molded 90° Coolant Hose (‘89-‘98, 12V & ‘98.5-‘02, 24V) Cut to fit application.
MOPAR - 3.25” Upper Cabin Heater Hose (‘06-‘07, 5.9L) Find clamps on page 75.
MOPAR - 2.5” Lower Cabin Heater Hose (‘03-‘07, 5.9L) Find clamps on page 75.
CUMMINS - 3” Silicone Upper Cabin Heater Hose (‘03-‘05) Find clamps on page 75.
GATES - 5/8” Straight Standard Heater Hose (‘98.5-‘02, 24V & ‘89-‘98, 12V) Cut to fit application.
GATES - 5/8” Straight Silicone Heater Hose (‘89-‘94, 12V) Cut to fit application.
GATES-28467: $11.95
GATES-18124: $12.95
GATES-20338: $7.95
05179114AB: $30.95
05086822AB: $21.95
3820663: $25.50
GATES-28411: $1.95/ft.
GATES-26241: $8.95/ft.
DORMAN - Heater Core Tube (‘03-‘05, 2500/3500, diesel only, manual transmission only) DRM626321: $119.95
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 28 Ram Turbo Diesel Parts & Accessories #121 ENGINE COOLING PARTS/ACCESSORIES
MOPAR - Upper Radiator Hose (‘19-‘23, 6.7L, 3500/4500/5500, with Aisin Transmission) 68359600AF: $48.50 MOPAR - Upper Radiator Hose (‘19-‘23, 6.7L, 2500/3500, with 68RFE Transmission) 68359598AF: $44.95 MOPAR - Upper Radiator Inlet Hose (‘15-‘18, 6.7L) 68227796AB: $73.95 MOPAR - Upper Secondary Inlet Hose (Dual Alternator) (‘14, 6.7L) 68224266AB: $53.95 MOPAR - Upper Inlet Hose w/Plastic “Y” Connector (‘13-‘14, 6.7L, 2500/3500/4500/5500) Clamps included. 52014722AD: $62.95 DORMAN - Upper Inlet Hose w/Aluminum “Y” Connector (‘13-‘14, 6.7L, 2500/3500/4500/5500) Clamps included. DRM626323: $69.95 MOPAR - Upper Secondary Inlet Hose (‘13-‘14, 6.7L) 68166469AC: $40.95 MOPAR - Upper Radiator Inlet Hose (‘10-‘12, 6.7L) Clamps included. 55056954AB: $28.95 MOPAR - Upper Radiator Inlet Hose (‘03-‘09, 6.7L) One clamp included. 52028872AG: $31.95 MOPAR - Upper Radiator Inlet Hose (‘98.5-‘02, 24V) No clamps included. 52028715: $33.95 GATES - Upper Radiator Hose (‘10-‘12, 6.7L) GATES-23955: $18.95 GATES - Upper Radiator Hose (‘03-‘09, 5.9L & 6.7L) GATES-22892: $19.95 GATES - Upper Radiator Hose (‘98.5-‘02, 5.9L, 24V) GATES-22645: $22.95 GATES - Upper Radiator Hose (‘94-‘98, 5.9L, 12V) GATES-22081: $22.95 GATES - Upper Radiator Hose (‘91.5-‘93) Intercooled GATES-21930: $18.95 GATES - Upper Radiator Hose (‘89-‘91) Non-Intercooled GATES-20957: $12.95 MOPAR - Lower Radiator Hose (‘19-‘23, 6.7L
68359639AC: $37.95 MOPAR - Lower Outlet Hose (‘19-‘23, 6.7L 2500/3500,
Transmission) 68359638AC: $33.95 MOPAR - Lower Outlet Hose (‘15-‘18, 6.7L)
68227797AB: $21.95 MOPAR - Lower Outlet Hose (‘13-‘18, 6.7L) 90° elbow
52014723AD: $21.95 MOPAR - Lower Secondary Outlet Hose w/Plastic
68166470AF: $40.95 DORMAN - Lower Secondary Outlet Hose w/Aluminum “Y” (‘13-‘14,
2500/3500/4500/5500) Clamps included. DRM626325: $38.95 MOPAR - Lower Outlet Hose (‘10-‘12, 6.7L) Clamps included. 55056955AA: $24.95 MOPAR - Lower Outlet Hose (‘03-‘09, 6.7L) Clamps included. 55056945AE: $43.95 MOPAR - Lower Outlet Hose (‘94-‘02, 5.9L) No clamps included. 52006482AB: $31.95 GATES - Lower Radiator Hose (‘10-‘12, 6.7L) GATES-23956: $17.95 GATES - Lower Radiator Hose (‘03-‘09, 5.9L & 6.7L) GATES-22893: $19.95 GATES - Lower Radiator Hose (‘94-‘02) GATES-22082: $17.95 GATES - Lower Radiator Hose (‘89-‘93) Intercooled GATES-20431: $19.95 GATES - 5/8” Molded Heater Hose - Heater Inlet (‘11-‘18, 6.7L) Cut to fit application. GATES-23957: $21.95 GATES - 5/8” Molded Heater Hose - Heater Outlet (‘07.5-‘10, 6.7L) Cut to fit application. GATES-18710: $10.95 GATES - 5/8” Molded Heater Hose - Heater Inlet (‘07.5-‘10,
GATES-18774:
3500/4500/5500, with Aisin Transmission)
with 68RFE
Straight with molded plastic nipple.
and includes clamps.
“Y” (‘13-‘14, 6.7L, 2500/3500/4500/5500) Clamps included.
6.7L,
GATES-19168:
‘Finger Touch’ Oil Drain Valve
Now drain your engine oil with the touch of a finger. No more stripped threads, fractured drain plugs, or leaky gaskets.
18MM DRAIN VALVE
‘02-‘23, 5.9L & 6.7L FTV-104A: $21.95
‘89-‘93, 12V FTV-104: $21.95
18MM REMOVABLE 3/8” HOSE NIPPLE - OPTIONAL ‘02-‘23, 5.9L & 6.7L ‘89-‘93, 12V FTV-H001: $5.00
22MM DRAIN VALVE
‘94-‘01 FTV-7B: $24.95
22MM REMOVABLE 5/8” HOSE NIPPLE - OPTIONAL
‘94-‘01 FTV-H 002: $6.00
14MM DRAIN VALVE
‘14-‘22, Ram EcoDiesel FTV-106: $21.95
14MM REMOVABLE 3/8” HOSE NIPPLE**
‘14-‘19, Ram EcoDiesel FTV-H 001E: $5.00
* The removable hose nipple is a convenience item. Attach a hose and let it drain to a remote location.
** Will not work on ‘20-’22, 1500 EcoDiesel.
OIL DRAIN VALVE METAL COVER
FTV-104, FTV-104A & FTV-106 FTV-DC-001: $2.00 FTV-7B FTV-DC-002: $2.25
Oil Pan (‘03-’18)
‘13-‘18 DRM264860: $439.95
‘03-‘12 DRM264470: $229.95
This replacement oil pan is a low cost replacement for your Ram truck that fits like OEM. Includes drain plug.
• Stamped steel construction ensures long lasting durability
• High strength coating prevents rust
• Manufactured to strict engineering quality standards
Billet Aluminum Transmission Oil
Dipstick Handle, ‘03-‘23, 5.9L & 6.7L
LT-TRANS-DS: $19.95
Dress up the engine compartment with this red anodized transmission oil dipstick handle.
NOTE: Does not fit Aisin transmissions.
Billet Aluminum Engine Oil
Dipstick Handle, ‘07.5-‘23, 6.7l
LT-DIPSTICK: $19.95
Dress up the engine compartment with this blue anodized oil dipstick handle.
Ram Cummins 2500/3500
FEMCO Drain Valve & Tube
‘02-‘23, 5.9L/6.7L EZ-DP-18MMPLA-DG: $36.95
‘94-‘01 EZ-DP-22MMPL-DG: $36.95
‘89-‘93 EZ-DP-18MMPL-DG: $36.95
‘89-‘23 EZ Drain Valve Tube EZ-TUBE-DG: $17.95
NOTE: Drain valve will not work without the tube. Installation requires 30mm socket or wrench.
NOTE: Tube sold separately.
Ram 1500 EcoDiesel, ‘14-‘22
FEMCO Drain Valve & Tube
‘14-‘22, 14-1.5mm Drain Valve
EZ-DP-15-14150-01: $36.95
‘14-‘19, EZ Drain Valve Tube (Small)
EZ-TUBE-CD-2001: $11.95
‘20-‘22, EZ Drain Valve Tube (Short 90°)
EZ-TUBE-ED90: $18.95
NOTE: Drain valve will not work without the tube. Installation requires 23mm socket or wrench.
90°
NOTE: Tube sold separately.
Permanently replaces the drain plug.
Patented drain tube screws into the oil plug.
• Drain the oil, remove the drain tube – thus resealing the drain valve –reinstall the O-ring sealed drain cap, and you’re finished.
included.
Order 770-886-2500 or genosgarage.com 29 Product prices subject to change without notice. ENGINE PARTS & ACCESSORIES/ DRAIN PLUGS
DRM0970041
DRM0971331 $3.95 Heavy-Duty
tip) 18MM (‘02-‘23) 5.9L & 6.7L HDOP-KIT-18MM2: $19.95 22MM (‘94-‘01) HDOP-KIT-22MM: $20.95 18MM (‘89-‘93) HDOP-KIT-18MM: $20.95 MOPAR ‘13-‘18, 6.7L Oil Pan & Gasket Pick Up Tube Gasket 68482548AA: $564.95 3949562: $3.95 Fits ‘03-‘20 CUMMINS ‘03-‘09, 5.9L & 6.7L Pan Gasket Pick Up Tube Gasket 5522189: $33.95 3949562: $3.95 Fits ‘03-‘20 MOPAR ‘07.5-‘12, 6.7L Oil Pan & Gasket 68482552AA: $699.95 CUMMINS ‘03-‘09, 5.9L & 6.7L Oil Pan Pan Gasket Pick Up Tube Gasket 3949769: $ 499.95 3958165: $65.95 3949562: $3.95 Fits ‘03-‘20 CUMMINS ‘94-‘02, 5.9L Oil Pan Pan Gasket Pick Up Tube Gasket 4089093: $275.00 4337616: $23.95 3938157: $3.95 CUMMINS ‘89-‘93, 5.9L Oil Pan Pan Gasket Pick Up Tube Gasket 3914403: $319.95 4337616: $23.95 3938157: $3.95 ‘03-‘09 ‘94-‘02 ‘89-‘93 Oil Pans
Gaskets
replacement oil
plugs
18MM. NOT E:
page.
DORMAN 18MM Oil Drain Plug Gasket (‘89-‘93 & ‘01-‘23)
$1.00 DORMAN 22MM Oil Drain Plug Gasket (‘94-‘01)
Oil Plug (with magnetic
and
(‘89-‘09) All
pan drain
are
Drain plugs are not
See options on this
‘03-‘12 ‘13-‘18
‘20-‘22,
‘14-‘19
TURBO ACTUATOR ELECTRONICS, 2500/3500/ 4500/5500
‘07.5-‘12 , ACTUATOR & GEAR HOUSING
CM-ACT12C1: $770.00
‘13-‘21, ACTUATOR & GEAR HOUSING
CM-ACTKIT2013: $985.00
FREE SHIPPING!
Kit includes actuator, gear housing and wiring adapter. With the VGT everything changed. To work on it you need training, expensive tools and you couldn’t test the actuator so you were left with replacing the turbo which is expensive. City Diesel worked to fix this. Step one was to develop an actuator tester that anyone could use. Shortly after they released it, more affordable rebuilt turbochargers started showing up. However, there was still a problem because the actuator has to be calibrated to the turbocharger and you were not able to simply replace an actuator. This means you either have to pay a fee to get the actuator calibrated at a dealership (average price $200) or buy the entire turbocharger even if the actuator was the only problem. The cost-effective solution: the creation of a new actuator. It is what we call a half-shell: you replace all the electronics, including the circuit board and motor, and reusing the half of your actuator that only contains gears (the “gearbox ‘07.5-‘12”). There is no calibration required and no complicated installation. Again, what this means to you is that you have a viable, costeffective option for replacing your actuator when you have a problem.
WASTEGATE CONTROL VALVE
‘04.5-‘07, 5.9L BD-1045921: $199.95
Replacement part for the OEM electronically controlled wastegate.
‘99-‘02, Manual Transmission
‘99, Automatic Transmission BD-1047151: $228.95
Will not work on HY35 turbo.
TURBO ADUSTABLE WASTEGATE ACTUATOR
‘94-‘98.5 BD-1047150: $278.95
Works with HX35 turbo only.
BD’s adjustable wastegate actuator keeps the bypass valve closed, raising boost levels for increased performance and helping to prevent wastegate “creep.” It includes a high temperature resistant Nomex diaphragm with a heavier spring and locking jam nut for precise boost pressure settings.
Buy with confidence. Turbochargers have one year warranty.
Gaskets and seals included
TURBOCHARGERS
‘13-‘18, 2500/3500 6.7L VGT
Rebuilt Turbo with City Diesel Actuator Speed sensor not included. CD5326054: $3750.00
Includes $1000.00 refundable core charge
‘04.5-‘07, 5.9L Wastegate solenoid not included. CD4043600: $825.00
‘00-‘02, 5.9L Automatic Transmission
CD4036239: $815.00
‘96-‘98, 12V & 24V Automatic & Manual Trans
CD3539343: $763.00
‘91-‘93, 5.9L 250/350
CD3802349: $660.00
‘7.5-‘12, 2500/3500 6.7L VGT
Rebuilt Turbo with City Diesel Actuator Speed sensor not included. CD3770973: $3050.00 Includes $1000.00 refundable core charge.
‘03-‘04, 5.9L (Will not work on ‘04.5 models with large hole in the compressor housing for sensor.)
CD4035044: $800.00
‘99-‘02, 5.9L ‘99, 2500/3500 All Transmissions ‘00-‘02, 2500/3500 Manual Trans CD3592766: $763.00
‘94-‘95, 5.9L Automatic & Manual Trans
CD3539911: $763.00
‘89-‘90, 5.9L 250/350 CD3528771: $550.00
$3.95
Get
technical information at our website: https://www.genosgarage.com/tech_info 30
Ram Cummins
Ram Turbo Diesel Parts & Accessories #121
COMPONENTS ‘07.5-‘18 MOPAR Turbo Oil Drain Tube 68005450AA: $82.95 ‘00-‘07, 5.9L Turbo Oil Drain Tube Will also work on ‘03-’04 trucks, but the pressed-in nipple will have to be removed to install it. 3970875: $77.95 ‘03-‘07, 5.9L Turbo Oil Drain Nipple Three piece design drain. 3931827: $39.95 ‘89-‘04 Turbo Oil Drain Silicone Hose Coupling 3286499: $37.95 ‘89-‘04 Turbo Oil Drain Silicone Hose Coupling GATES-TL150: $25.95 ‘03-‘04 Turbo Oil Drain Coupling Clamp Sold individually. 3412320: $9.95 ‘89-‘02 Turbo Oil Drain Tube Mounts to the turbo. 3918585: $91.95 ‘89-‘02 Turbo Oil Drain Elbow Pressed into the engine block. 3903744: $44.95 ‘89-‘02 Turbo Oil Drain Coupling Clamp Sold individually. 3937613: $4.95 ‘89-‘18 Turbo Oil Drain Bolt 2 required. 3900630: $2.95 each TURBO OIL SUPPLY LINES ‘03-‘18, 5.9L & 6.7L Turbo Oil Supply Line 4935577: $91.95 ‘98.5-‘02, 24V Turbo Oil Supply Line 3935821: $96.95 ‘91.5-‘98, 12V Turbo Oil Supply Line 3912747: $88.95 ‘98.5-‘18, 5.9L & 6.7L Turbo Oil Supply Line O-ring to Oil Inlet Fitting 3922794: $3.50 ‘98.5-‘21, 5.9L & 6.7L Turbo Oil Inlet Fitting with O-ring 4940183: $29.95 ‘91.5-‘98, 12V Turbo Oil Inlet Fitting with O-ring 3919687: $23.95 TURBO GASKETS & SEALS MOPAR Exhaust to Turbo Gasket (‘07.5-‘18, 6.7L ) 68071676AA: $19.95 CUMMINS Turbo to Exhaust Manifold Gasket (‘13-‘18, 6.7L ) 5266419: $34.95 CUMMINS Turbo to Exhaust Manifold Gasket (‘07.5-‘12, 6.7L ) 5260648: $12.95 CUMMINS Turbo to Exhaust Manifold Gasket (‘03-‘07, 5.9L ) 3949530: $6.95 CUMMINS Turbo to Exhaust Manifold Gasket (‘89-‘02, 5.9L ) 3901356: $6.95 MAHLE Turbo Mount Gasket Kit (‘07.5-‘18, 6.7L) GS33616: $23.95 MAHLE Turbo Mount Kit (‘03-‘07, 24V 5.9L) GS33584: $14.95 MAHLE Turbo Mount Kit (‘98.5-‘02, 24V 5.9L) GS33583: $13.95 MAHLE Turbo Mount Kit (‘91.5-‘98, 12V 5.9L) GS33582: $15.95 CUMMINS HX35 Turbo Housing to Turbo Elbow - 5-bolt gasket (5.9L) 3535001: $13.95 CUMMINS T4 Undivided Turbo Flange Gasket (5.9L) 3755843: $22.95 CUMMINS Turbo Compressor Outlet Flange O-ring (‘94-‘02, 5.9L ) HX35, HY35, HX40, S300 turbos 3883284: $6.95 MOPAR Turbo Oil Drain Gasket (‘13-‘22, 6.7L ) 05183354AB: $8.95 CUMMINS Turbo Oil Drain Gasket (‘03-‘12, 5.9L & 6.7L ) 5264568: $3.95 CUMMINS Turbo Oil Drain Gasket (‘89-‘02, 5.9L) 5264569: $3.95 CUMMINS Turbo Oil Drain O-ring (‘07.5-‘22, 6.7L) Fits nipple pressed into the engine block. 2 required per application. 3928624: $4.95
Turbo Oil
O-ring (‘94-‘07, 5.9L) Fits nipple pressed into the engine block. 1 required per application. 3931824: $4.95 CUMMINS Turbo Coolant Line Sealing Washer (‘07.5-‘22, 6.7L ) 3963991: $6.95 GENOS Turbo Coolant Line Sealing Washer (‘07.5-‘22, 6.7L ) GG-3963991:
TURBO CHARGERS, PARTS & ACCESSORIES/ ENGINE PARTS & ACCESSORIES TURBO OIL DRAIN TUBES &
CUMMINS
Drain
Harmonic Dampers
When was the last time you thought about the crankshaft vibration damper on your Dodge Cummins Turbo Diesel? We will bet you did not know that your Owner’s Manual suggests that you inspect the damper every 30k, 60k, 90k, etc. miles. Get a reduction in noise, better idle quality, less clutch/gearbox chatter (manual trans), and less vibration when accelerating in the 2000rpm to 3000rpm speed zone.
‘07.5-‘22, 6.7L FLUID_ 920321: $630.70
‘03-‘07, 5.9L FLUID_ 920301: $630.70
‘98.5-‘02, 24V FLUID_ 960301: $563.55
‘94-‘98, 12V FLUID_ 960311: $630.70
(# 960311 Includes Sensor Kit 300003)
Drill Pin Kit, All Years
FLUID_300002: $67.15
( Adds extra pins between the damper and the crank. Used on high horsepower trucks that exceed 3500 rpm in order to additionally secure the damper to the crankshaft.)
LEARN MORE: HARMONIC DAMPER https://www.genosgarage.com/downloads/TechPDF/TDR114-Installing-Fluid-Dampr.pdf https://www.genosgarage.com/downloads/TechPDF/TDR73_HarmonicDamper.pdf
oem
The Cummins/Mopar vibration dampers are OEM replacements and are not designed for hi-performance applications.
Intercooler Hoses
Replacement intercooler hoses feature an exclusive Viton inner liner to better withstand high heat and contamination. Hoses are rated for 145 psi and are sold individually.
‘94-‘02 Pipe to Intercooler (Hot Side) 45° elbow
‘94-‘02 Intercooler to Pipe (Cold Side) 45° elbow
‘03-‘09 Pipe to Intercooler (Hot Side)
‘03-‘09 Intercooler to Pipe (Cold Side)
‘94-‘96, 5.9L (built after 10-3-95) Pipe to Engine (Cold Side)
‘97-‘09, 5.9L & 6.7L Pipe to Engine (Cold Side)
‘97-‘98, 5.9L 12V Turbo to Pipe (Hot Side)
‘94-‘96, 5.9L (built after 10-3-95) Turbo to Pipe (Hot Side)
‘98.5-‘02, 5.9L 24V Turbo to Pipe (Hot Side)
‘97-‘02, 5.9L 12V & 24V Pipe to Engine (Cold Side)
‘94-‘96, 5.9L (built before 10-2-95) Pipe to Engine (Cold Side)
‘94-‘96, 5.9L (built before 10-2-95) Turbo to Pipe (Hot Side)
‘03-‘09, 5.9L & 6.7L Turbo to Pipe (Hot Side)
‘07-‘09, 5.9L & 6.7L Pipe to Engine (Cold Side)
‘10-‘12, 6.7L Intercooler to Pipe (Cold Side)
‘10-‘12, 6.7L Pipe to Engine (Cold Side)
‘10-‘12, 6.7L Pipe to Intercooler (Hot Side)
‘10-‘12, 6.7L Turbo to Pipe (Hot Side)
‘13-‘18, 6.7L Intercooler Pipe to Engine (Cold Side)
GATES-26229: $155.95
GATES-26232: $149.95
Clamps included with each hose.
GATES-26230: $42.95
Killer Dowel Pin Kit (‘89-‘02)
‘94-‘98, 12V - STRAIGHT TAB
TST-KDP03: $65.00
‘89-‘93 / ‘98.5-‘0 2, 24V - BENT TAB
TST-KDP04: $65.00
The dowel pin used in the Cummins engine can back out of its bore. When it does, it can fall into the camshaft gear and cause all types of expensive engine damage.
The folks at TST Products have developed a kit to cover the dowel pin and prevent its movement. The kit is inexpensive protection. However, the labor involved to access the KDP and cover it with the cover tab is time consuming. Fortunately clear instructions make it a job that the D-I-Yer can handle.
LEARN MORE: KILLER DOWEL PIN
https://www.genosgarage.com/downloads/TechPDF/TDR57_KillerDowelPin.pdf
Black Nomex Silicone intercooler hoses designed for 75 psi of turbo boost with spring-loaded clamps to hold them in place.
GATES-26231: $115.95
GATES-26224: $87.95
GATES-26237: $51.95
GATES-26233: $48.95
GATES-26234: $49.95
GATES-26235: $84.95
GATES-26235C: $84.95
2.75”
BD-1405209: $22.95 3.00” BD-1405211: $22.95
3.50” BD-1405212: $22.95
These clamps are designed to be used where high boost levels require a hose clamp that can provide extra holding power.
$22.95
Order 770-886-2500 or genosgarage.com 31 Product prices subject to change without notice.
ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES
4.00” BD-1405213:
‘10-‘13, 6.7L BD-1045217: $396.95 ‘07.5-‘09, 6.7L BD-1045216: $396.95 ‘03-‘07, 5.9L BD-1045215: $406.95 ‘94-‘02, 5.9L BD-1045210:
intercooler hose kits
$406.95
Vibration DamperS
CUMMINS ‘13-‘18, 6.7L 5333569: $445.00 ‘07.5-‘12, 6.7L 5285679: $599.95 ‘98.5-‘02, 24V 3918999: $274.95 ‘94-‘98, 12V 3924435: $316.95 ‘89-‘93, 12V 3916436: $295.95 MOPAR ‘19-‘22, 6.7L 68538446: $649.00 ‘03-‘07, 5.9L 05086735AA: $469.00
Hi-Torque Hose Clamps
‘13-‘18, 6.7L Cab/Chassis DRM674562
CUMMINS ‘98.5, 24V
‘98.5-‘02, 24V DRM674602
Direct Replacement Exhaust Manifolds
We found these Dorman exhaust manifolds that we can offer at a great price. The manifold kits even include six engine-to-manifold gaskets and a turbo gasket. The drawback? You might want to use a die grinder to clean up the rough casting around the ports.
‘13-‘18, 6.7L Cab/Chassis DRM674562: $479.95
‘07.5-‘12, 6.7L
‘03-‘07, 5.9L
‘98.5-‘02, 24V
‘89-‘98, 12V Works on trucks with or without EGR.
V-BAND
CLAMPS
DOWNPIPE-TO-CAST IRON ELBOW
DRM674895: $499.95
DRM674910: $269.00
DRM674602: $233.95
DRM674527: $178.95
CUMMINS ‘89-‘98, 12V 3911349
CUMMINS & MOPAR Exhaust Manifolds
If you look into the engine compartment of your Dodge Cummins Turbo Diesel and find it dirty with soot, it is a good indication that the exhaust manifold is cracked. Replace it with an OEM manifold.
MOPAR ‘07.5-‘18,
Exhaust Manifold Stud Kits
‘89-‘98, 12V with aftermarket ATS or BD manifold
STUDKIT8905: $58.00
‘98.5-‘07, 24V with stock or aftermarket manifold
‘07.5-‘18, 6.7L 52121859AD: $57.95 (Gasket not included. Get 68071676AA)
DOWNPIPE-TO-CAST IRON ELBOW
‘04.5-‘07, 5.9L 52121285AA: $36.95
DOWNPIPE-TO-CAST IRON ELBOW
‘03-‘04, 5.9L 52103596: $39.95
V-BAND CLAMPS
CAST IRON ELBOW-TO-TURBO
‘07.5-‘18, 6.7L 3905216: $45.95
TURBINE HOUSING-TO-COMPRESSOR
HE341/HE351 TURBO
‘03-‘07, 5.9L 3595658: $49.95
TURBINE HOUSING-TO-CAST IRON ELBOW ‘03-‘07, 5.9L 3535399: $55.95
DOWNPIPE-TO-CAST IRON ELBOW ‘89-‘98, 12V 0 4428550: $31.95
V-BAND CLAMPS
DOWNPIPE-TO-CAST IRON ELBOW
‘07.5-‘18, 6.7L DRM904353: $39.95 (Gasket included.)
DOWNPIPE-TO-CAST IRON ELBOW
‘04.5-‘07, 5.9L DRM904354: $36.95
DOWNPIPE-TO-CAST IRON ELBOW ‘03-‘04, 5.9L DRM904253: $37.95
STUDKIT8905_A: $58.00
Save yourself the frustration of trying to line the gaskets up with the manifold and cylinder head using the OEM bolts. Install this stud kit, hang your exhaust manifold gaskets on the studs and then install the manifold. Kit comes with studs and nuts required for a complete installation. NOTE: Kits do not have studs for the turbo-to-manifold connections. Does not work on ‘89-‘98, 12-valve engines when the stock manifold is reused because the studs are too short.
EGR CROSSOVER TUBE & EGR COOLER V-band clamp
‘07.5-‘18, 2500/3500, 6.7L ‘07.5-‘12, 3500 C&C, 6.7L ‘08-‘12, 4500/5500 C&C, 6.7L PAI Industries Cummins PAI-042049: $23.95 5450793: $58.95
TORCTITE STAINLESS STEEL EXHAUST PIPE CLAMP PREFORMED LAP JOINT CLAMPS
3.5” HD20S350: $7.25 4” HD20S400: $9.75
5” HD20S500: $10.15
HEAVY-DUTY
See our stainless steel Custom exhaust tips at our website.
‘07.5-‘12, 6.7L 3500/4500/5500 Chassis/Cab Only. (2-Piece Manifold ) BD-1045967:
‘03-‘07, 5.9L (2-Piece Manifold ) BD-1045987-KIT
Pulse Exhaust Manifolds
BD’s Pulse exhaust manifolds are cast from high-silicon ductile iron which can withstand extremely high temperatures, as well as the additional weight created by bigger single or twin turbo systems. Expansion joints allow the manifold to expand and contract.
‘07.5-‘18, 6.7L 2500/3500 (2-Piece Manifold ) BD-1045965: $559.95
‘13-‘18, 6.7L 3500/4500/5500 Chassis/Cab Only. (2-Piece Manifold ) BD-1045968: $589.95
‘07.5-‘12, 6.7L 3500/4500/5500 Chassis/Cab Only. (2-Piece Manifold ) BD-1045967:
Exhaust Manifold Gasket Sets
‘07.5-‘18, 6.7L BD-1045992: $87.95 ‘13-‘18, 6.7L Chassis/Cab Only BD-1045994: $110.95
TURBO MOUNTING KIT
‘07.5-up, 6.7L (2-Piece Manifold )
$34.95
This turbo mounting kit has all the necessary hardware for your turbo reinstall to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install HE351 and HE300VG mounted turbos.
https://www.genosgarage.com/tech_info 32 Ram Turbo Diesel Parts & Accessories #121 EXHAUST MANIFOLDS & REPLACEMENT PARTS
$559.95
5.9L (2-Piece Manifold ) Gaskets included. BD-1045987-KIT: $559.95 ‘98.5-‘02, 24V (3-Piece Manifold ) Gaskets included. BD-1045947-KIT: $559.95
12V (3-Piece Manifold ) Gaskets included. BD-1045948-KIT: $559.95
‘03-‘07,
‘89-‘98,
NOTE: The BD Pulse 24-Valve manifold DOES NOT require any drilling for studs.
6.7L 2500/3500 68482545AA: $649.95 MOPAR ‘13-‘18, 6.7L Cab/Chassis 68205983AA: $640.00 CUMMINS ‘07.5-‘12, 6.7L Cab/Chassis 5303009: $635.00 MOPAR ‘03-‘07, 5.9L 05135788AC: $399.95 CUMMINS ‘99-‘02, 24V 5254373: $382.95 CUMMINS ‘98.5, 24V 3937187: $750.00
‘89-‘98, 12V 3911349: $745.00
CUMMINS
BD-1045983:
EXHAUST PIPE CLAMP ROUND BAND, DOUBLE SADDLE 3.5” HD19A350Z: $5.50 4” HD19A400Z: $5.75 5” HD19A500Z: $4.50
NEW!
Dodge Replacement
Fuel Lift Pump (‘98.5-‘04.5)
‘98.5-‘02 FASS_DRP_02: $306.85
‘03-‘04.5 FASS_DRP_04: $369.55
Includes: (6) banjo gaskets to make install easier.
NOTE: The DRP is designed as a stock replacement pump. It will not meet the needs of hi-performance (over 300hp) applications.
The Dodge Replacement Pump (DRP) gives you the dependability of a FASS product without the cost of a complete system. An additional benefit is that fuel flow is increased by 33%.
We’re excited to sell the FASS DRP product. Its availability allows us to offer several fuel transfer pump options to our customers.
The DRP provides 80gph of fuel. The DRP-02 mounts in the stock location on the side of the engine. The DRP-04 relocates the pump to the side of the truck’s frame below the fuel cannister. The DRP kits come complete with all of the neccessary hardware for the relocation of the pump and instructions to make the installation straightforward.
DRP fuel lift pumps are not compatible with waste vegetable oil (WVO) or B20 or higher biodiesel fuels. DRP pump comes with a 4-YEAR WARRANTY from FASS.
Titanium SIGNATURE SERIES
Fuel Pump and Double Filter
‘19-‘20, 2500/3500 - 100GPH
FASS_TS_D12_100G: $749.00
‘05-‘18 & ‘21-‘22, 2500/3500 - 100GPH
FASS_TS_D07_100G: $749.00
‘98.5-‘04.5, 2500/3500 - 100GPH
FASS_TS_D08_100G: $699.00
‘14-‘18, 1500 EcoDiesel - 110GPH
FASS_TS_D11_110G: $899.00
Fuel pumps include installation and mounting hardware.
SIGNATURE SERIES
Adjustable Fuel Pump
‘10-‘14 FASS_FAS_D05_100G: $599.00
(1/2” Fuel Line Kit, 1/2” Suction Tube Kit, and Wiring Harness)
‘05-‘09 FASS_FAS_D07_100G: $599.00
(1/2” Fuel Line Kit, 1/2” Suction Tube Kit, and Wiring Harness)
‘98.5-‘04.5 FASS_FAS_D08_100G: $549.00
(1/2” Fuel Line Kit and Wiring Harness)
FASS High-Performance Fuel Pump for ‘98.5-‘04.5 trucks
DOES NOT include a draw straw for the fuel tank.
100
GPH
The FASS High-Pressure fuel pump kit lets you place the fuel transfer pump underneath the truck bed frame rail. The HPFP adjustable fuel pump will support stock to 600 horsepower levels.
The fuel pump kit includes all hardware for installation. Fuel pump comes with a LIFETIME WARRANTY from FASS.
PAI
Fuel transfer pump
‘89-‘93, 12V - 5.9L, Diaphragm Type PAI-180102-KIT: $29.95 Gaskets and stud kit included.
PAI
Fuel transfer pump
‘94-‘98, 12V - 5.9L, Piston Type PAI-180105-KIT: $54.95 Gaskets and stud kit included.
CUMMINS
Fuel Transfer Pump
‘94-‘98, 12V I
100 GPH
The FASS 95 Titanium fuel pump and filter kit with FASS Whisper Technology offers a reliable high volume pump that provides a consistent flow of fuel (100 GPH) to your injection pump. Each kit comes with a 3 micron fuel filter and fuel/water separator since the kit will bypass your factory fuel filter housing and go directly to your fuel injection pump.
Whisper Technology helps reduce the noise created by aftermarket fuel and air separation diesel lift pumps. By using radius cuts, tighter tolerances on all gears and a high quality military Spec’d Coating over the aluminum base, FASS Fuel Systems was able to develop the quietest fuel air separation system on the market.
This FASS Fuel Pump and Filter will support horsepower levels from stock to 600 horsepower.
Each kit comes with a LIFETIME WARRANTY from FASS.
FASS FUEL PUMP PARTS & ACCESSORIES
See our website for more details.
FASS - Universal Heavy Duty Pickup Frame
Clamp Bracket
FASS - Titanium Fuel Pump Heater Kit
For extremely cold climates.
FASS - High Output Fuel Heater Disk Kit
Includes harness.
FASS - Y-Splitter
Used for installing two #32283 heater probes.
FASS - Replacement Heating Element Probe
For Titanium Series heaters used in HK-1001 heater kit.
FASS - Suction Tube Kit
Bypasses in-tank fuel pumps.
Find fuel filters on pages 11-12.
FASS_CBK1001: $71.25
FASS_HK1001: $160.55
FASS_ HK1002: $160.55
FASS_ HKS1001: $37.05
FASS_ 32283R: $118.75
FASS_ STK1005: $94.05
PUMP_4988747: $145.95
Includes gaskets and stud kit.
Fuel Transfer Pump Relocation Kits (‘98.5-‘02)
STANDARD KIT
(3/8” DIA. FUEL HOSE)
VULCANRELOKIT: $116.95
‘BIG LINE’ KIT
(1/2” DIA. FUEL HOSE)
VULCAN_VPPS9802_KIT: $159.95
This kit enables owners of ‘98.5-‘02 trucks to relocate the engine’s problematic fuel transfer pump. The kit consists of a bracket; 3/8” diameter B-20 bio-diesel compatible fuel hose rated at 50 psi; electrical extension; and custom fittings. The benefits of relocation: the transfer pump is not subjected to continual engine vibration; the transfer pump is closer to the fuel tank and operates more like a pusher pump; and should the pump fail, the pump is now very easy to access.
The optional ‘Big Line’ Kit with 1/2” fuel line is a high-performance version of the Standard Kit designed for use in high horsepower trucks. Detailed instructions are included which show you how to move the fuel transfer pump from the engine to the frame rail.
The mounting bracket in this kit will also work with the FASS DRP pump. NOTE: Fuel transfer pump is not included in Relocation Kit.
Airtex brand fuel pumps available at your local parts store will work with these fuel transfer pump relocation kits. The Airtex fuel pump mounts horizontally rather than vertically like the OEM fuel pump (see photo). To mount the pump, simply flip the bracket so that the short tab is mounted to the frame.
Product prices subject to change without notice. Order 770-886-2500 or genosgarage.com 33 FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES
New and Remanufactured OEM Fuel Injectors Lack of maintenance and poor fuel filtration can shorten injector life. If you have trouble with one, the other five will fail shortly thereafter. The labor for one is the same as the labor for six. The replacement parts decision involves serious money and repair time. We offer these new and reman injectors for ‘89-‘18 trucks. Now you have the best of both, a manufacturer and vendor you can rely on.
REMAN ‘13-‘18, 6.7L
Not Chassis Cab trucks.
REMAN ‘07.5-‘12, 6.7L
Not Chassis Cab trucks.
NEW ‘04.5-‘07, 5.9L
Built after 01-01-04
REMAN ‘04.5-‘07, 5.9L
Built after 01-01-04
REMAN ‘03-‘04, 5.9L
NEW ‘98.5-‘02, 24V-RV (275HP)
NEW ‘00-‘02, 24V HO (245HP)
NEW ‘98.5-‘02, 24V (235HP) Manual Transmission
NEW ‘98.5-‘02, 24V (235HP) Automatic Transmission
NEW ‘96-‘98 (215HP)
Manual Transmission
NEW ‘96-‘98 (180HP)
Automatic Transmission and California only.
NEW ‘94-‘95 (175HP)
Manual Transmission
NEW ‘94-‘95 (160HP)
Automatic Transmission
NEW ‘91.5-‘93 with Intercooler
BSH-0986435621: $470.00
BSH-0986435518: $480.00
BSH-0445120238: $480.00
BSH-0986435505: $410.00
BSH-0986435503: $415.00
BSH-0432193635: $98.00
BSH-0432193581: $102.00
BSH-0432193629: $102.00
BSH-0432193630: $108.00
BSH-0432133844: $104.00
BSH-0432133860: $104.00
BSH-0432133860: $104.00
BSH-0432133859: $104.00
BSH-0432133877: $104.00
NEW ‘89-‘91 without Intercooler BSH-0432133888: $110.00
2003 to 2018 injectors have a core charge of $150 each refundable upon return of the core. No core charge for 1989-2002 injectors.
Your old injector cores are required back. Whatever you do, stay with OEM Reman injectors and “get it right” the first time around rather than going with an aftermarket injector and having to do the job twice.
Our website has the full story on injectors (See the “Perfect Collection,” pages 19-31), along with the how-to to save you the labor time (about six hours) should you wish to do the job yourself.
Fuel Filter Kit (‘97-‘99)
FFK98599: $136.95 $134.95
Has your ‘97-‘99 Turbo Diesel developed a leak at either the top of the fuel filter housing or at the O-ring area of the fuel heater due to years of use and material fatigue?
Have you tried to source a replacement kit from Chrysler or Cummins only to find it is no longer available or ridiculously priced?
Here is a cost-effective solution: use a replacement filter head and corresponding filter/ water separator from the ‘94 to ‘96 vintage
The Fuel Filter Kit includes:
Billet aluminum filter head • Water-in-fuel sensor • 4 banjo fitting gaskets • FS1253 fuel filter for ‘97-98, 12V and FS19519 for ‘98.5-99, 24V
To make the water-in-fuel sensor operative you simply cut and splice into the existing wire leads to the sensor.
NOTE: Kit does not have provisions for the fuel heater unit on ‘98.5-‘99 trucks. If the fuel heater unit on your ‘98.5-‘99 truck is leaking, we have a Fuel Heater Block Off that solves the problem on page 37. Or get a replacement fuel heater seal on page 37.
(To upgrade banjo bolts or add fuel pressure, see the fittings on page 37.)
NOTE: Kit does not have provisions for the fuel heater unit on ‘98.5-‘99 trucks. If the fuel heater unit on your ‘98.5-‘99 truck is leaking, we have a Fuel Heater Block Off that solves the problem on page 39. Or get a replacement fuel heater seal on page 39.
BILLET ALUMINUM
FUEL FILTER HEAD KIT (‘94-’96)
GG-3925600-KIT: $89.95
‘94-‘96 Dodge Cummins fuel filter heads are no longer available from Chrysler so we sourced our own. Made from billet aluminum, this filter head is a direct bolt-on replacement of the OEM part. It can also be used on other applications. The Fuel Filter Head Kit includes: Replacement Filter Head • (4) Banjo Bolt Gaskets • Filter Nipple (To upgrade banjo bolts or add fuel pressure, see the fittings on page 37.)
FLEECE PERFORMANCE
SUREFLO FUEL TANK MODULE AND FUEL LEVEL SENDING UNIT without fuel pumps
SureFlo performance sending units are designed to work with stock and aftermarket lift pumps and mounts directly into your stock sending unit location. It features factory style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. Similar to OE, SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit. This ensures you are always drawing fuel into your pump
and not drawing air into the fuel system.
Features:
• OEM style fitment that requires no tank cutting or drilling
• New fuel level electronics and fuel float
• Heavy duty billet aluminum cap
• Universal -8 AN ports for professionally plumbing a custom fuel setup
Also includes:
• New tank flange seal
• Pigtail adapter
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 34 Ram Turbo Diesel Parts & Accessories #121 FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES
‘98.5-‘02 ‘03-‘23 CUMMINS Crossover Tube with O-Ring ‘03-‘23, 5.9L & 6.7L 2872288: $61.95 ‘98.5-‘02, 24V 3936953: $53.95 OEM Crossover Tube with O-Ring ‘03-‘23, 5.9L & 6.7L B-2872288: $57.95 ‘98.5-‘02, 5.9L, 24V B-3936953: $29.95 CROSSOVER TUBE O-RING ‘03-‘23, 5.9L & 6.7L 4062328: $2.95 ‘98.5-‘02, 24V 3867043: $3.50
Tubes & Injector Seals INJECTOR COPPER SEAL ‘03-‘18, 5.9L & 6.7L 3937142: $3.75 ‘98.5-‘02, 24V 3906659: $4.50 INJECTOR O-RING SEAL ‘03-‘18, 5.9L & 6.7L B-4890926: $2.95 ‘98.5-‘02, 24V 3029820: $4.95
Crossover
‘05-‘09 2500/3500 5.9L &6.7L ‘98-‘02 2500/3500, 12V & 24V 5.9L FPE-SF-CUMM-0509: $359.00 FPE-SF-CUMM-9802:
‘03-‘04 2500/3500 5.9L ‘94-‘97 2500/3500 5.9L FPE-SF-CUMM-0304: $359.00 ‘91.5-‘93 250/350 5.9L FPE-SF-CUMM-9197: $359.00
$359.00
Fuel injector line Sets
Fuel injector and fuel supply lines
VP44 to tee fitting (Grommet seal & nut included.)
Return Line 3942966: $56.95 Cylinder head to tee fitting (Grommet seal & nut included.)
Return Line 3942592: $36.95 Tee fitting to quick connect (Grommet seal & nut included.)
For fuel return line.
Male Union Tee 3908985: $14.95 Connects 3908988 & 3918641
#1 3909438: $87.95 #2 3903486: $79.95 #3 3903487: $79.95 #4 3903488: $77.95 #5 3903489: $77.95
#6 3903490: $74.95
CUMMINS Supply Line 3908988: $59.95
Outlet of fuel filter to brass union.
CUMMINS Supply Line 3918641: $55.95
Brass union to VE injection pump.
CUMMINS Supply Line 3910150: $65.95 Lift pump to fuel filter.
Injector Return Line 3909696: $146.95
Return Line 3905707: $71.95
Injection pump to tee. Non intercooled.
Fuel Supply Line Grommet 3905351A: $16.95
Fuel Return Line Grommet 3905391: $13.95
Fuel Drain Tube 3912137: $59.95
Union Tee to Quick connect fitting. Non Intercooled.
Order 770-886-2500 or genosgarage.com 35 Product prices subject to change without notice. ‘07.5 -‘18 6.7L CUMMINS #1 4935981: $76.95 CUMMINS #2 4935982: $81.95 CUMMINS #3 4935982: $81.95 CUMMINS #4 4935974: $78.95 CUMMINS #5 4935974: $78.95 CUMMINS #6 4935976: $76.95 MOPAR Supply Line 68005436AA : $89.95 Injection pump to fuel rail. ‘07 5.9L CUMMINS #1 3957081: $77.95 CUMMINS #2 4988810: $85.95 CUMMINS #3 4988809: $82.95 CUMMINS #4 5289447 $84.95 CUMMINS #5 4988807: $53.95 MOPAR #6 05086876AD: $110.95 CUMMINS Supply Line 3957079: $56.95 Injection pump to fuel rail. Return Line 5086810AA : $177.95 Rail pressure relief valve to the filter housing. Return Line 5093088AA : $146.95 Back of cylinder head to the fuel filter housing. ‘98.5 -‘02 5.9L, 24V #1 3943765: $121.95 #2 3943767: $133.95 #3 3943769: $132.95 #4 3943771 $129.95 #5 3943773: $132.95 #6 3943775: $132.95 CUMMINS Supply Line 3942260: $90.95 ‘98.5-‘99 24V Lift pump to fuel filter. CUMMINS Supply Line 3944906: $139.95 ‘98.5-‘99 24V Fuel filter to injection pump. Return Line 3945707: $50.95
Fuel
Tee 3905353:
VP44 Lift Pump Inlet Line 3943376: $81.95
6.7L BD
Line Set 2007.5- 2018, 6.7L Includes #1 through #6 Injector Lines BD-1050151: $389.95 ‘03-‘07 5.9L BD POWER Common Rail Injector Line Set 2003- 2007, 5.9L Includes #1 through #6 Injector Lines BD-1050150: $259.95 Fuel injector and fuel supply lines FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES #1 3925805: $115.95 #2 3925806: $79.95 #3 3925807: $83.95 #4 3925808: $115.95 #5 3925809: $85.95 #6 3925810: $116.00 CUMMINS Supply Line 3923171: $81.95 Injection pump to rubber fuel return line. CUMMINS Supply Line 3918880: $55.95 Lift pump to fuel filter. CUMMINS Supply Line 3936691: $71.95 Fuel filter to injection pump. CUMMINS Supply Line 3923090: $98.95 Fuel supply to fuel preheater. Return Line 3926103: $157.95 Return Line Seal 3684091: $3.95 Tee Grommet Seal #1 3920233: $78.95 #2 3920234: $99.95 #3 3920235: $101.95 #4 3920236: $78.95 #5 3920237: $77.95 #6 3920238: $101.95 CUMMINS Supply Line 3910150: $65.95 Lift pump to fuel filter. CUMMINS Supply Line 3908988: $59.95 Outlet of fuel filter to brass union. CUMMINS Supply Line 3918641: $55.95 Brass union to VE injection pump. Injector Return Line 3909696: $146.95 Return Line 3919756: $149.95 Male union tee to quick connect. Return Line 3920888: $24.95 VE injection pump to tee. Return Line 3925860: $96.95 VE injection pump. Fuel Supply Line Grommet 3905351A: $16.95 Fuel Return Line Grommet 3905391: $13.95 Male Union Tee 3905388: $34.95
Fuel Return Line Grommet 3905351: $16.95
Injector Return
$36.95
‘07.5 -‘18
POWER Common Rail Injector
‘89 -‘91 5.9L
FUEL SYSTEM ACCESSORIES
BILLET ALUMINUM FUEL CANISTER CAP
‘10-‘23 LT-67FUELCAP : $86.95
Is your plastic fuel filter canister cap showing the signs of aging? You know, the rounded-off shoulders of the 28mm hex head. We’ve also seen the caps over-torqued and cracked. Here is a stylish and functional solution. A billet aluminum fuel cap that fits the 2010-newer Ram 6.7-liter Cummins Diesel engines.
FUEL FILTER CAP WITH FUEL PRESSURE TEST PORT
‘00-‘07, 5.9L LT-59FUELCAP : $72.95
Black anodized billet aluminum with 1/8” pressure port and a 3/4” hex head for easy removal.
‘10-‘18, 6.7L
FUEL DISTRIBUTION BLOCK KITS
‘10-‘18, 6.7L BD-1050371: $98.95
‘03-‘09, 5.9L & 6.7L BD-1050370: $108.95
Fuel Pressure Test Kit (‘98.5-‘02, 5.9L)
This kit is a 2-1/2” liquid filled 0-30 psi gauge in a stainless steel housing with a built in snubber, Weatherhead 250 psi hose, brass push-lock fittings and brass Schraeder valve actuator for ‘00-‘02 trucks (with rubber seal and knurled thumb screw). Ships with 1/8 NPT fitting for use with ‘98.5-‘99 trucks.
NOTE: Purchase the FPADPT-KIT to allow you to check the fuel pressure on all ‘89‘97, 12V and ‘03-‘07, 24V trucks.
VULCAN Draw Straw I (‘94-‘04)
The CNC machined billet Draw Straw I features dual ports which allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for a second return line. This makes for a clean and secure installation. Works with 3/8” and 1/2” fuel line
NOTE: Will not work on trucks equipped with and in-tank pump.
VULCAN Draw Straw III (‘98.5-‘18)
‘03-‘09, 5.9L & 6.7L
These billet aluminum blocks are used to replace the factory fuel filter housings after the installation of an aftermarket fuel pump/ filtration system (FASS, etc.). All mounting hardware and fuel fittings are included. Also has pressure ports for checking fuel pressure.
FUEL FILTER HOUSING DELETE
‘03-‘09, 5.9L & 6.7L GG-FFD0309: $41.95
This aluminum block is used to replace the factory fuel filter housings after the installation of an aftermarket fuel pump/ filtration system (FASS, etc.). All banjo washers are included. Also has pressure ports for checking fuel return pressure.
FUEL TANK STRAPS
Direct replacements for the originals. Manufactured from durable materials to withstand harsh road and weather conditions.
The Draw Straw™ 3 Is the threaded version of the original Draw Straw 2 for use with plastic or metal tanks in Dodge trucks of 3/8” thickness or less. This unit is a single port billet aluminum fitting that requires a 3/4” hole to be drilled in the tank. This design keeps all threaded connections out of the tank so there is nothing to come loose inside. The 16” draw tube is compatible with all motor fuels.
VULCAN Draw Straw V (‘98.5-‘18)
The Draw Straw V HiFlow allows for greater fuel volume by using 1/2” plumbing. The DSV installs inside the tank module in place of the factory pump on fuel systems/tanks in ‘05-‘09 trucks. You can use the original OEM supply connection as the FASS return line putting more fuel back into the module for low fuel level situations. No tank drilling! A simple 5/8” inch hole in the module is all that’s required to insert the DSV HF fitting.
Works with 3/8” and 1/2” fuel line
VULCAN Filter to Injection Pump
Hose Kit (‘98.5-‘07, 5.9L)
This hose connects the fuel filter outlet to the injection pump. It is great for those with a FASS HPFP or other systems who want to completely eliminate the restrictions in the fuel supply circuit.
VULCAN Universal Fit
STAINLESS STEEL FUEL TANK STRAPs,
ND-TS8993: $86.95
Replace rusty fuel tank straps on your Dodge Ram 2500/3500 with a 30-gallon fuel tank with these direct replacement straps.
STAINLESS STEEL FUEL TANK STRAPs, ‘94-’02
ND-TS9402: $86.95
Replace rusty fuel tank straps on your Dodge Ram 2500/3500 with these direct replacement straps.
Fuel Pressure Line (‘98.5-‘02)
This hose is 1/4” diameter (inside diameter), 30” in length, and is rated for 100 psi. The assortment of fittings for each end of the hose allow you to add a fuel pressure sending unit to the fuel system. Purchase a tapped banjo bolt to use this fuel pressure line on other year trucks.
VULCAN_DS1 $79.99
VULCAN_VP02 $53.99
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 36 Ram Turbo Diesel Parts & Accessories #121 FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES
TEST_KIT $63.00
VULCAN
VULCAN_DS3 $42.00
VULCAN_DS5 $69.99
VULCAN-FH $24.00
‘91-’93
‘03-‘19, 2500/3500 (35 Gallon Tank)
DRM578305: $42.95
‘94-‘02, 2500/3500
DRM578191: $45.95
FUEL SYSTEM ACCESSORIES
Fuel Pressure Test Adapter with Schrader Valve and Adjustable Snubber (‘89-‘07, 5.9L)
This kit works with the VULCAN Universal Fit Fuel Pressure Line (VULCAN-FH).
Fuel Pressure Test with Schrader Valve Adapter (‘89-‘07, 5.9L)
The Fuel Pressure Test Adapter allows for a quick and easy fuel pressure check on all Ram trucks with the Cummins Turbo Diesel engine. Testing the fuel pressure is a must when diagnosing fuel delivery problems. Kit includes: banjo fitting, gaskets, and Schraedar valve with cap.
GATES Barricade ® Fuel Line
Heavy Duty replacement fuel hose. Will work with Diesel, Bio-Diesel, gas and other fuel types. We also offer 5/16” diameter fuel hose to repair/replace the problematic fuel return hose used on ‘94‘98, 12-valve engines.
Auto Meter Fuel Pressure Line
If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stainless steel line kit and #3279 fuel pressure snubber (sold separately) to prevent premature failure of the sending unit. Failure to do so will void the gauge warranty.
Auto Meter Fuel Pressure Snubber
GG-FPSNUB-KIT
$26.95
FPADPT-KIT
$21.95
5/16” DIAMETER GATES-27324
$3.95/ft.
3/8” DIAMETER GATES-27325
$3.95/ft.
1/2” DIAMETER GATES-27326
$4.25/ft.
CUMMINS Banjo Snubber
12MM x 1.5 thread (‘89-‘07, 5.9L)
Dampens the pressure spikes of the Cummins lift pump. The snubber installs at the filter housing and takes the place of a 12mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.)
CUMMINS Banjo Snubber
14MM x 1.5 thread (‘94-‘98)
Designed specifically for Cummins
5.9L diesel engines and dampens the pressure spikes of the lift pump. It installs at the injection pump only and takes the place of a 14mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.)
Barbed Banjo Fitting Clamp included with fitting.
Individual Tapped (M12) Banjo Fittings
(‘89-‘93 & ‘98.5-‘07, 5.9L)
These Banjo Fittings feature a large diameter (.187” vs. .130”) fuel port. The fittings are SAE (3/4” hex) vs. the stock 17mm hex design. Fitting on the top is the standard fitting, while the fitting on bottom has a built-up hex drilled to accept a 1/8 NPT male threaded fuel pressure sensor. ( Requires 2 replacement gaskets Gaskets on page 38.)
‘89-‘07, 5.9L
BF-BBS010
$23.99
AM-3279
1/8 NPT RLT Snubber
RLT-SNUBBER $8.00
Fuel Pressure Tee
1/2” DIA. FPT_1-2: $12.50 3/8” DIA. FPT_3-8: $12.50
Fuel Filter Plug (‘89-‘96)
Individual (M12) Banjo Fitting and Gasket Kit
(‘89-‘93 & ‘98.5-‘07, 5.9L)
Includes (1) Banjo Fitting (above) and (2) Gaskets
Vulcan Performance Jacobs Brake Fuel Line Adapter
This 1/2” 12MM adapter is designed for use with trucks equipped with a Jacobs Brake. When fitting a fuel line to the injection pump there is a clearance issue. Allows for pump clearance without using a restrictive banjo fitting.
Vulcan Performance Modified Fuel Module (‘98-’04, 2500/3500)
Replacement aftermarket fuel tank module without fuel pump. Uses factory 3/8” pickup and 5/16” return quick-connect fittings.
Freddy Frugal says this fuel module is less than the price of OEM. See pg. 38 for MOPAR Fuel Module #4897668AI.
Vulcan Performance Female
Quick-Connect Fuel Fitting - to 1/2”
Connects 3/8” quick connect to 1/2” barbed fuel fitting.
Vulcan Performance Female
Quick-Connect Fuel Fitting - to 3/8”
Connects 3/8” quick connect to 3/8” barbed fuel fitting.
Lift Pump to 3/8” Barbed Inlet Fitting (‘94-‘98 12-valve)
‘ 94-‘98
BF-CBS010
$24.49
M12 X 3/8
B1206: $7.49 each
M14 X 3/8
B1406: $7.49 each
TAPPED
BF-LONG-TAPPED $7.00
UNTAPPED
BF-LONG-UNTAPPED $4.50
NEW!
TAPPED GG-BFTAPPED-KIT $10.95
UNTAPPED GG-BFUNTAPPED-KIT $7.95
VULCAN_PBF $20.00
VULCAN_MFM20E $229.99
VULCAN_FQC68PL $8.50
VULCAN_FQC6 $8.00
GG-FFPLUG $15.00 Fuel Tank Vent, Rollover Valve (‘94-‘02, 2500/3500 5.9L) 52127666 $34.95 Fuel Module Rollover Valve Grommet (‘94-‘02, 2500/3500 5.9L) 5217802 $7.95 Mechanical Fuel Pump Blockoff Plate (‘94-‘98, 5.9L 12V) NEW! FPE-CUMM-FBOP $36.74 FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES
Order 770-886-2500 or genosgarage.com 37 Product prices subject to change without notice.
$55.95
AM-3227
Recommended on all AutoMeter electric fuel pressure gauges installed in Ram Cummins trucks. $26.95
It is highly recommend that you use this snubber on trucks with the VP-44 injection pump to dampen the fuel pulsations (hydraulic hammering) created by the injection pump.
Inline fuel pressure tee available in either 1/2”, 3/8” or 5/16” diameter barbed fittings with 1/8 NPT threaded fitting. Works well with aftermarket FASS fuel systems.
This billet aluminum plug is handy to have when your truck’s water-in-fuel sensor/ drain fails and is leaking fuel. Install it and stop the leak.
GG-LPBF9402 $7.95
1989-1993 FIRST GENERATION
CUMMINS Fuel System Bleed Screw and Captive Washer (‘89-‘98, 12V)
CUMMINS Fuel Filter
Housing Banjo Bolt (‘89-‘98, 12V)
Bolt is for the #3939570 bleeder screw on this page. Requires 2 3963983 banjo bolt gaskets. See below.
CUMMINS Fuel Return Check Valve (‘89-‘98, 12V)
Requires 2 #3918188 washers. See this page.
CUMMINS Fuel Filter Inlet/Injector Return
Banjo Bolt - 8mm port (‘89-‘98, 12V)
Works with #3924726 fuel bleed screw.
Requires 2 BF-3918188 8mm banjo bolt washers. See below.
CUMMINS Fuel Injector Return Line
Banjo Bolt (‘89-‘98, 12V)
Use one 4942278 horseshoe shaped washer per bolt.
VE Pump Return Overflow Valve (‘89-‘93)
(Requires 2 #BF-3963983 washers. See below.)
8mm Sealing Washer
Rubber sealing washer for ‘89-‘98, 12V Dodge Cummins fuel filter bleed screw and fuel injector return lines.
1994-2002 SECOND GENERATION
VULCAN
For
* NOTE: Many early trucks have had the fuel level sending units replaced or updated in the past. We recommend removing the module and confirming which sending unit is installed before ordering.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 38 Ram Turbo Diesel Parts & Accessories #121
OE Style Fuel Tank Module and Sending Unit (‘98-‘04)
See MOPAR Fuel
#4897668AI. VULCAN_MFM20E $229.99 MOPAR Fuel Tank Module and Sending Unit (‘98-‘02) For trucks
no fuel pump. Includes tank seal. 4897668AI $439.95 Fuel Tank Module and Sending Unit (‘96-‘97) For trucks
tank. Includes tank seal. (1994-1995 wiring adapter #GG-WHADAPT9495 below.) P74699R $229.95 Fuel Tank Module Wiring Harness Adapter For ‘94-’95
trucks
‘96-‘97 fuel tank module/sending unit. GG-WHADAPT9495 $19.95 MOPAR Fuel Level Sending Unit (‘00-‘02) 2500/3500 Will not work on trucks with “in tank” fuel pump conversions. 04897669AC $75.95 MOPAR Fuel Module Tank Seal (‘90-‘06) Works with OEM fuel modules. 52018808 $11.95 MOPAR Fuel Tank Module Lock Ring (‘94-‘04) 52005389 $25.95 DORMAN Fuel Filter Cap (‘00-‘07, 5.9L) DRM904301 $22.95 Cummins Fuel Canister Drain (‘00-‘02) 3959453S $13.95 Fuel Preheater/Strainer (‘94-‘98, 12V) (2) 3939258 gaskets required. See page 67. CUMMINS 3847102S $231.95 Fuel Preheater Strainer Service Kit (‘94-‘98, 12V) 3845400S $8.95 CUMMINS Heater Element for Fuel Heater/Prefilter (‘94-‘98, 12V) Upper gasket included. 3907766S $36.95 Fuel Pre-Heater Bowl to Heater Element Lower Gasket (‘94-‘98, 12V) GG-3842021 $4.95 CUMMINS Fuel Pre-Heater Upper Gasket (‘94-‘98, 12V) 3834185-S $6.95 Cummins Wiring Harness and Thermostat for Fuel Heater/Pre-filter (‘94-‘98, 12V) 3843722S $57.95 CUMMINS Injector Dust Seal O-ring (‘94-‘98, 12V 5.9L) 3909356 $2.95 FUEL
FUEL
PARTS/ACCESSORIES
trucks with no fuel pump. Includes tank seal. Freddy Frugal says this fuel module is less than the price of OEM.
Module
with
with a 34 or 35 gallon fuel
Ram 2500/3500
to use the
PUMPS &
SYSTEM
3939570 $10.95
3911446 $18.95
3924726 $116.95
3916361 $8.95
3905307 $7.95
OEM
B-OFV8993 $10.95
CUMMINS 3918188 $5.95 GENO’S GG-3918188 $3.25 12mm Sealing Washer CUMMINS BF-3963983 $3.25 each GENO’S GG-3963983 $2.95 each 14mm Sealing Washer CUMMINS 3963988 $4.95 each GENO’S GG-3963988 $3.50 each CUMMINS Fuel Heater Seal (‘89-‘93) 3913695 $7.95 Injector Return
Bolt Sealing Washer (‘89- ‘98, 12V) Horseshoe shaped gasket. 1 per injector. 4942278 $3.95 Fuel Pre-Heater Delete Nipple (‘89-‘93) CUMMINS 3925954 $29.95 GENO’S GG-3925954 $16.95 CUMMINS Throttle Linkage Rod Kits (‘91-‘93) (Threaded rod measures 4-7/8”) Please compare to your original throttle linkage rod before ordering. 4089077 $83.95 CUMMINS Throttle Linkage Rod Kits (89-‘91) (Threaded rod measures 4-1/4”) Please compare to your original throttle linkage rod before ordering. 4089076 $82.95.95 CUMMINS Throttle Rod Ends & Studs (‘ 91-‘98) Right Hand Thread 15/16 / 33mm long. 3990093 $15.95 CUMMINS Throttle Rod Ends & Studs (‘ 91-‘98) Left Hand Thread 3990094 $51.95 AFTERMARKET Fuel Shut-Off Solenoid (‘89-‘93) FS15 $19.95 OEM Fuel Shut-Off Solenoid (‘89-‘93) B-3903575 $41.95 CUMMINS Water-in-Fuel Sensor (‘89-‘96) 3831852-S $33.95 MOPAR Fuel Module Tank Seal (‘90-‘06) Works with OEM fuel modules. 52018808 $11.95
Banjo
1994-2002 SECOND GENERATION
8mm Sealing Washer
sealing washer for ‘89-’98, 12V Dodge Cummins fuel filter bleed screw and fuel injector return lines.
12V)
This fuel heater block-off allows you to remove the leaky fuel heater from the discontinued fuel filter top. Includes 2 Viton o-rings.
1994-2002 SECOND GENERATION
CUMMINS Fuel System Bleed Screw and Captive Washer (‘89-‘98, 12V)
CUMMINS Fuel Filter
Housing Banjo Bolt (‘89-‘98, 12V) Bolt is for the #3939570 bleeder screw on this page. Requires 2 3963983 banjo bolt gaskets. See this page.
CUMMINS Return Check Valve (‘89-‘98, 12V) Requires 2 #3918188 washers. See this page.
CUMMINS Fuel Filter Inlet/Injector Return Banjo Bolt - 8mm port (‘89-‘98, 12V)
Works with #3924726 fuel bleed screw.
Requires 2 BF-3918188 8mm banjo bolt washers. See this page.
CUMMINS Fuel Injector Return Line Banjo Bolt (‘89-‘98, 12V)
Use one 4942278 horseshoe shaped washer per bolt.
Cummins Water-in-Fuel Sensor (‘00-‘07, 5.9L) 10mm thread.
AFTERMARKET
Fuel Heater Block Off (‘00-‘07, 5.9L)
The fuel heater block off V2 allows you to remove a leaky fuel filter heater/thermostat since the fuel heaters have been discontinued.
Fuel Filter Heater O-Ring (‘00-‘07)
This Viton o-ring is an upgrade from an OEM part and will provide a longer lasting seal. GG-FHORING-V2
Fuel Filter Heater O-Ring (‘98.5-‘99)
This Viton o-ring is an upgrade from an OEM part and will provide a longer lasting seal. GG-FHORING
OEM VP44 Fuel Overflow Valve Kit (‘98.5-‘02, 24V)
This kit comes complete with the fuel overflow valve and two sealing washers.
OEM Fuel Overflow Valve Kit (‘94-‘98, 12V)
This kit comes complete with the fuel overflow valve and two sealing washers.
AFTERMARKET Fuel Filter Canister Drain Valve (‘97-‘99)
CUMMINS P7100 Injection Pump Oil Feed Supply Line (‘94-‘98, 12V)
CUMMINS Fuel Pump Elbow (‘94-‘98, 12V) Thread to barbed. Installs on the side of the lift pump. *Barbed fitting available on page 37.
LED Low Fuel Pressure Indicator (‘98.5-‘07, 5.9L)
lights up when fuel pressure descreases to 5 psi. Tapped banjo bolt and gaskets included.
Order 770-886-2500 or genosgarage.com 39 Product prices subject to change without notice. FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES
3939570
$10.95
3911446 $18.95
3924726
$116.95
3916361 $8.95
3905307
$7.95
3959454S $9.95
Sensor
GG-OR9799WS $.95 Cummins Water-in-Fuel Sensor (‘89-‘96, 12V) 3831852-S $33.95 CUMMINS Throttle Linkage Rod Kits (‘94-‘98) Please compare to your original throttle linkage rod before ordering. 3932317 $177.95 Throttle Rod Ends & Studs (‘ 91-‘98, 12V) P7100 10MM Throttle Lever Ball Stud GG-3990112 $12.95 CUMMINS Throttle Rod Ends & Studs (‘ 91-‘98, 12V) Right Hand Thread 1-13/16 / 45mm long. 3990095 $20.95 CUMMINS Throttle Rod Ends & Studs (‘ 91-‘98, 12V) Right Hand Thread 15/16 / 33mm long. 3990093 $14.95 CUMMINS Throttle Rod Ends & Studs (‘ 91-‘98, 12V) Left Hand Thread 3990094 $57.95 CUMMINS Throttle Return Springs (‘94-’98, 12V) Heavy Spring - Two Clipped Ends 3933130 $74.95 CUMMINS Throttle Return Springs (‘94-’98, 12V) Light Spring - Two Clipped Ends 3931510 $24.95 CUMMINS Throttle Return Springs (‘94-’98, 12V) Std. Spring - Clipped/Metal Hook Ends 3925377 $31.95 CUMMINS Throttle Return Springs (‘94-’98, 12V) Std. Spring - Clipped/Metal Hook Ends 3923058 $14.95 BD
Indicator
BD-1081130 $88.95
Water-in-Fuel
Viton O-ring (‘97-‘99, 5.9L) This viton o-ring provides a superior seal compared to a standard rubber o-ring.
CUMMINS 3918188 $5.95 GENO’S GG-3918188 $3.25 12mm Sealing Washer CUMMINS BF-3963983 $3.25 each GENO’S GG-3963983 $2.95 each 14mm Sealing Washer CUMMINS 3963988 $4.95 each GENO’S GG-3963988 $3.50 each CUMMINS P7100 to Gearhousing O-ring (‘94-‘98, 12V) 3969698 $ 15.95 Injector Return Banjo Bolt Sealing Washer (‘89- ‘98, 12V) Horseshoe shaped gasket. 1 per injector. 4942278 $3.95 Fuel Pre-Heater & Lift Pump –Fuel Elbow Hose (‘94-‘98, 12V) CUMMINS 3931523 $29.95 MOP-04746638 $43.95 MOPAR Lift Pump Spacer (‘94-‘98,
Rubber
(2) 3939258 gaskets
3914284 $12.95
Heater
Used when removing fuel heater.
required. See page 67.
Fuel
Block-Off (‘98.5-‘99)
GG-FHBO $16.95 CUMMINS Fuel Heater Thermostat (‘00-‘07, 5.9L) 3900349S $112.95
GG-FHBO-V2 $29.95
$1.50
$1.00
B-3941156 $29.95
B-3932096 $81.95
GG-9799DV $63.95
3923083 $94.95
3925711 $34.95
2003-2009 THIRD GENERATION
14mm Banjo Bolt
5.9L)
For fuel rail overflow valve. Requires (2) 3967317 replacement gaskets.
BD LED Low Fuel Pressure Indicator (‘98.5-‘07, 5.9L)
Indicator lights up when fuel pressure descreases to 5 psi. Tapped banjo bolt and gaskets included.
Fuel Heater Block Off (‘00-‘07, 5.9L)
The fuel heater block off V2 allows you to remove a leaky fuel filter heater/thermostat sicne the fuel heaters have been discontinued.
Fuel Filter Heater O-Ring (‘00-‘07, 5.9L) This Viton o-ring is an upgrade from an OEM part and will provide a longer lasting seal.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 40 Ram Turbo Diesel Parts & Accessories #121 FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES
Fuel Injection Rail (‘03-‘07, 5.9L) Fuel injection rails come complete with rail pressure sensor and fuel pressure limiting valve. OEM B-4929618 $272.95 Fuel Injection Rail (‘07.5-‘12, 6.7L) Fuel injection rails come complete with rail pressure sensor and fuel pressure limiting valve. OEM B-4937282 $349.00 CUMMINS 4937282 $650.00 Fuel Rail Pressure Relief Valve (‘07.5-‘18, 6.7L) OEM B-4938005 $130.00 CUMMINS 4938005 $335.00 Fuel Rail Pressure Relief Valve (‘03-‘07, 5.9L) OEM B-3947799 $125.00 CUMMINS 3947799 $381.95 Fuel Rail Pressure Sensor (‘07.5-‘12, 6.7L) OEM B-5297640 $125.00 CUMMINS 5297640 $329.95 Fuel Rail Pressure Sensor (‘03-‘07, 5.9L) OEM B-5297641 $86.00 CUMMINS 5297641 $339.95 Fuel Control Actuator (‘03-‘07, 5.9L) Replacement mounting hardware included. OEM B-4932457 $142.95 CUMMINS 4932457 $191.95 OEM Fuel Control Actuator Replacement mounting hardware included. OEM ‘07.5-‘18, 6.7L B-4936097 $144.95 CUMMINS CP3 to Gearhousing O-ring (‘03-‘18, 5.9L & 6.7L) 3949688 $4.95 CUMMINS 14mm Banjo Bolt Sealing Washer (‘03-‘07, 5.9L) For fuel rail overflow valve. 2 required. 3967317 $5.95 12mm Sealing Washer CUMMINS BF-3963983 $3.25 each GENO’S GG-3963983 $2.95 each 14mm Sealing Washer CUMMINS 3963988 $4.95 each GENO’S GG-3963988 $3.50 each
2003-2009 THIRD GENERATION
CUMMINS
(‘03-‘07,
3958987 $6.95
BD-1081130 $88.95
3948978-S $54.95
Fuel
Thermostat (‘00-‘07, 5.9L) 3900349S $112.95
CUMMINS Fuel Heater Element (‘07.5-‘09, 6.7L)
CUMMINS
Heater
GG-FHBOV2 $29.95
GG-FHORING-V2 $1.50 CUMMINS Fuel Injector Harness Retaining Clips (‘03-‘05, 5.9L) Sold individually. (6 required per engine.) 3963736 $3.95 CUMMINS Fuel Injector Return Check Valve (‘03-‘07, 5.9L) Requires: (1) #3963988 14MM gasket - $4.95 ea. (1) #3963983 12MM gasket - $3.00 ea. 3957290 $102.95 OEM Cascade Overflow Valve (‘03-‘07, 5.9L) B-OFV0307 $37.63 CUMMINS Water-in-Fuel Sensor (‘07.5-‘23, 6.7L) 3911940-S $12.95 Cummins Water-in-Fuel Sensor (‘00-‘07, 5.9L) 10mm thread. Check size before ordering. 3959454S $9.95 Cummins Water-in-Fuel Sensor (‘03-‘07, 5.9L) 14mm thread. Check size before ordering. 3953517S $11.95
MOPAR Fuel Canister O-ring Seal Kit (‘03-‘07, 5.9L) Includes: fuel lid seal, fuel drain seal, WIFS seal, fuel heater seal, fuel pump seal (‘03-‘04). Doesn’t include banjo bolt gaskets.
2010-2023 FOURTH GENERATION
Fuel Injection Rail (‘13-‘18, 6.7L)
Fuel injection rail comes complete with rail pressure sensor and fuel pressure limiting valve.
Fuel Injection Rail (‘07.5-‘12, 6.7L)
Fuel injection rail comes complete with rail pressure sensor and fuel pressure limiting valve.
MOPAR Fuel Filter Cap (‘10-‘23, 6.7L)
* Want something a little more robust than this tool made of plastic? See page 36 for the billet aluminum cap.
MOPAR Fuel Filter Cap (‘19-‘23, 6.7L 2500/3500/4500/5500 & ‘20-’23 Ram 1500 EcoDiesel)
Order 770-886-2500 or genosgarage.com 41 Product prices subject to change without notice. FUEL PUMPS & FUEL SYSTEM PARTS/ACCESSORIES 2003-2009 THIRD GENERATION
Water-in-Fuel
3911940-S $12.95 Cummins
3959454S $9.95 MOPAR Fuel Filter Canister Drain (‘03-‘07, 5.9L) 5080552AB $27.95 DORMAN Fuel Filter Canister Top
Gasket (‘00-‘07, 5.9L) DRM904301 $22.95
5093129AA $32.95
5072766AD $83.95
with OEM fuel modules. 52018808 $11.95 MOPAR Fuel Tank Module Lock Ring (‘94-‘04) 52005389 $25.95
FOURTH GENERATION OEM Fuel Control Actuator (‘07.5-‘18,
Replacement mounting hardware included. B-4936097 $144.95 CUMMINS CP3 to Gearhousing O-ring (‘03-‘18, 5.9L & 6.7L) 3949688 $4.95
CUMMINS
Sensor (‘07.5-‘23, 6.7L)
Water-in-Fuel Sensor (‘00-‘07, 5.9L) 10mm thread. Check size before ordering.
and
MOPAR Fuel Level Sending Unit (‘03-‘04, 5.9L) For Long Bed trucks with 35 gallon fuel tank. Will not work on trucks with in-tank fuel pump conversions.
MOPAR Fuel Module Tank Seal (‘90-‘06) Works
2010-2023
6.7L)
68065612AA $63.95
68436815AA $50.95
OEM B-5295117 $345.00 CUMMINS 5295117 $680.00
OEM B-4937282 $349.00 CUMMINS 4937282 $624.95 Fuel
(‘13-‘18,
OEM B-4306993 $259.95 CUMMINS 4306993 $192.95 Fuel Rail Pressure Sensor (‘07.5-‘12, 6.7L) OEM B-5297640 $125.00 CUMMINS 5297640 $329.95 Fuel Rail Pressure Relief Valve (‘07.5-‘18, 6.7L) OEM B-49338005 $130.00 CUMMINS 4938005 $335.00 MOPAR Drain Valve/Water in Fuel SensorChassis Mounted (‘10-‘18, 6.7L) 2500/3500/4500/5500 68197868AB $30.95 RACOR (OEM) Drain Valve/Water in Fuel SensorChassis Mounted (‘10-‘18, 6.7L) 2500/3500/4500/5500 PFRK54553 $34.00 CUMMINS Water-in-Fuel Sensor (‘07.5-‘23, 6.7L) 3911940-S $12.95 MOPAR Fuel Canister Drain (‘10-‘23, 6.7L) 68065611AA $29.95 Fuel Canister Drain Valve for chassis mounted cannister (‘19-‘23 2500/3500/4500/5500) 68436628AA $10.95 2014-2023 RAM 1500 ECODIESEL - 2019 CLASSIC MOPAR Fuel Filter Canister (‘14-‘19) 68394482AA $237.95 MOPAR Fuel Filter Cap (‘19-‘23, 6.7L 2500/3500/4500/5500 & ‘20-’23 Ram 1500 EcoDiesel) 68436815AA $50.95 Fuel Canister Drain Valve (‘20-‘23) 68436628AA $10.95 EZ Fuel Filter Canister Drain Valve (‘14-‘19) ( M12 - 1.5mm) FTV-109 $21.95
Rail Pressure Sensor
6.7L)
Fuel Rail Pressure • 0-30,000 psi * (Wiring harness)
$192.00
ISS-R30288 (‘03-‘07, 5.9L only.)
ISS-R30289 (‘07.5-‘12, 6.7L only.)
ISS-R30289C (‘13-‘18, 6.7L only.) $ 171.95
$195.00
ISS-R14288 (‘03-‘07, 5.9L only.)
ISS-R14289 (‘07.5-‘18, 6.7L only.) $159.95
$158.00
$195.00
ISS-R17288: $155.95 (‘03-‘07, 5.9L only.)
ISS-R17289: $159.95 (‘07.5-‘18, 6.7L only.)
is used to activate a pre-installed warning light on EV2 gauges, and to adjust the point at which the light illuminates. Please see our website for details or call our Tech Line ISS-R82003: $40.95 *These gauges may require additional hardware depending on application. See pages 36-37 & 44 for hardware.
eas presssure sender 0-100psi
EDGE-98607: $177.95
BEST VALUE!
This kit is ideal for the daily diesel driver or if you are towing then it’s a must have! Towing can put a lot of strain on the truck and make it run hot. Don’t be left on the side of the road with an overheated truck because you didn’t watch your EGTs.
(Includes EAS Starter Cable and EAS Temperature Probe.)
Works with CS2 or CTS3 to monitor data such as boost PSI, lift pump pressure, pre- and post-intercooler pressure and more.
eas temperature probe
EDGE-98608: $49.82
Use in conjuction with the CS2 or CTS3 monitor to view critical temperatures.
EDGE-98004 $33.38
This adapter from EDGE allows you to mount the CS, CS2, CTS, CTS2, or CTS3 products in a 2-1/16” gauge pillar pod. The adapter’s state-of-the-art swivel system gives you the flexibility to adjsut the monitor to your own optimal viewing angle.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 42 Ram Turbo Diesel Parts & Accessories #121
MOUNTS & ACCESSORIES
CTS2/CTS3 EAS EGT Kit (Daily Driver/ Tow Kit) EDGE-98620: $160.95
GAUGES, GAUGE
CS/CS2/CTS/
EDGE UNIVERSAL GAUGE MOUNT
DESCRIPTION EV2 GAUGES R30000 SERIES BLACK/WHITE FACE White Lettering Blue Illumination Red Indicator EV2 GAUGES WHITE FACE Black Lettering Green Illumination Red Indicator EV2 GAUGES BLACK FACE White Lettering Green Illumination Red Indicator 2” Boost Pressure • 0-100 psi ( * 1/8 NPT sending unit / ** 10 Foot Tubing) ISS-R30433: $169.95 * ISS-R14433: $198.00 * ISS-R17433: $185.00 2” Boost Pressure • 0-60 psi ( * 1/8 NPT sending unit / ** 10 Foot Tubing) ISS-R30233: $178.00 * ISS-R14233: $184.00 * ISS-R17233: $184.95 2” Boost Pressure • 0-40 psi ( * 1/8 NPT sending unit / ** 10 Foot Tubing) ISS-R30333: $198.95 * ISS-R14333: $198.95 * ISS-R17333: $185.00 2” Mechanical Boost Pressure • 0-30 psi ( **10 Foot Tubing) N/A ISS-R14113: $99.95 ISS-R17113-1.7VDC: $103.95 2” Electric Fuel Pressure • 0-40 psi * (1/8 NPT sending unit; Wiring harness) ISS-R30055: $156.00 ISS-R14055: $187.00 ISS-R17055: $187.95 2” Electric Fuel Pressure • 0-30 psi * (1/8 NPT
ISS-R14033:
ISS-R17033:
sending unit; Wiring harness) ISS-R30033:
Electric
Oil
(1/8 NPT sending
Wiring harness) N/A ISS-R14211:
ISS-R17211: $165.00 2” Exhaust Gas Temperature • 0°-1600° (1/8 NPT, Adj. Short, High Temp. K-Series Probe) ISS-R30022: $176.00 PRE or POST turbo ISS-R14022: $189.95 PRE or POST turbo ISS-R17022: $176.00 PRE or POST turbo 2” Exhaust Gas Temperature • 0°-1600° (1/8 NPT, Adj. Short, High Temp. K-Series Probe) *ISS-R14021: $176.00 *ISS-R17021: $176.00 2” Tachometer • 0-3000 RPM (Tachometer sensors sold seperately) ISS-R12502: $156.95 Tach to OEM Wiring Harness (‘92-‘93) (Built after 6/1/92) Connects factory wiring harness to ISSPRO gauge wiring harness for the 2” tachometer (ISS-R5503 & ISS-R5501). ISS-R8912-92: $56.95 Magnetic Sensor Required magnetic sensor for the Tachometer Gauge Installation Kit for Tachometer Gauge (ISS-R5503 & SS-R5501). ISS-R8912: $72.95 2” Transmission Temperature 140°-320° • Full-Sweep (Includes 1/8 NPT sending unit) ISS-R14566: $129.00 ISS-R17566: $136.00 2” Transmission Temperature 100°-280° • Full-Sweep (Includes 1/8 NPT sending unit) ISS-R30599: $129.00 ISS-R14599: $135.00 ISS-R17599: $136.00 Optional Wiring Harnesses EV2 Lighting Dimmer ISS-R72022: $26.95
V 2 & Performax Programmer
Pressure • 0-100 psi
unit;
Attribute Programmer for E
* If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stainless steel line kit and #3279 fuel pressure snubber to prevent premature failure of the sending unit. Failure to do so will void the gauge warranty.
*The fuel pressure gauges may require additional hardware depending on application. See pages 36-37 & 44 for hardware.
Back-up Camera for CTS/CTS3
EDGE-98203: $237.95
The CTS3 line of products have a built-in video port that allows users to connect the Edge back-up camera.
The CTS3’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected.
Features:
Insight CTS3 & CS2
‘96-‘23, 2500/3500 EDGE CTS3
‘14-‘18, ECODIESEL EDGE CTS3 EDGE-84130-3: $462.95
The “Insight” Color Touch Screen 3 (CTS3) has a high-resolution, 5-inch screen to monitor the performance of your ‘96-‘23 OBD-II equipped truck.
‘96-‘20, 2500/3500 EDGE CS2
‘14-‘18, ECODIESEL EDGE CS2 EDGE-84030: $379.95
NOTE: Limited data available on ‘96-‘07, 5.9L trucks.
• Parking Guide Lines • Night Vision LEDs
License plate mount • Adjustable Camera Angle
• Waterproof Quick and Easy Installation to connect to any Attitude
CTS, Evolution CTS2/CTS3 or Insight CTS2/CTS3 • Extended USB & RCA, Power and Ground Cables to make installation easier
**Monitor not included with purchase of camera.
CS2/cts2/CTS3 Dash Pod
‘06-‘09
EDGE-38505: $70.56
‘03-‘05 EDGE-38504: $64.00
‘98.5-‘02 EDGE-38503: $70.56
Put your EDGE on the dash of your truck in a dash pod that won’t warp or deform over time. Pod is angled for easy viewing.
Adapter kit included.
NOTE: The pod is molded in a charcoal/agate color. Can be painted to match the dash in your truck.
The “Insight” CS2 has all of the same capabilities as the CTS3, but has a smaller 2.4-inch high-resolution screen with button-control.
At Geno’s we have used analog gauges in our Turbo Diesel trucks, but the concept of having multiple gauges that do not require fancy gauge mounts and a lot of underhood tinkering really appeals to us. The voice of experience screams out, “It can’t be any easier than plug-and-play using the OBD-II port.” And, plug-and-play we did. We love the CTS3 (and now the CS2) as it gives you up to eight data items that you can keep track of on the screen.
See our website for information about data and accessories. For more information about the operation of the Insight CTS3 and CS2 along with a complete listing of vehicle parameters, visit the EDGE Products website at: www.edgeproducts.com
‘10-‘18 EDGE-38405: $116.95 ‘03-‘09 EDGE-38406: $116.95
If you want a color-matched A-Pillar mount, no competitor matches EDGE. Will not warp or deform.
Order 770-886-2500 or genosgarage.com 43 Product prices subject to change without notice. GAUGES, GAUGE MOUNTS & ACCESSORIES
DESCRIPTION Factory-Match (‘10-up) Factory Match (‘03-‘09) Phantom II Series Phantom Series Ultra-Lite II Series Ultra-Lite Series Z Series 2” Boost Gauge • 100 psi (1/8 NPT) (includes fittings, tubing and light kit) AM-8509 $90.95 AM-8506 $90.95 AM-5706 $77.95 AM-4306 $79.95 2” Boost Gauge • 60 psi (1/8 NPT) (includes fittings, tubing and light kit) AM-8508 $85.95 AM-8505 $84.95 AM-7505 $88.95 AM-5705 $80.95 AM-4905 $88.95 AM-4305 $80.95 AM-2617 $85.95 2” Boost Gauge • 35 psi (1/8 NPT) (includes fittings, tubing and light kit) AM-8507 $85.95 AM-8504 $85.95 AM-7504 $88.95 AM-5704 $78.95 AM-4904 $88.95 AM-4304 $80.95 AM-2616 $74.95 2” Electric Fuel Pressure Gauge • 30 psi * (electric, full sweep, stepper motor movement, includes 1/8 NPT sending unit) AM-8561 $231.95 AM-8560 $231.95 AM-5760 $252.95 AM-4360 $257.95 AM-2660 $243.95 #4 Braided
Steel Line Kit
Stainless
AM-3227: $55.95 2” Exhaust Gas Temperature Gauge • 0°-1600° (includes Street Series Probe, wiring and light kit) AM-8546 $211.95 AM-8544 $210.95 AM-7544 $224.95 AM-5744 $214.95 AM-4944 $219.95 AM-4344 $214.95 AM-2654 $214.95 2” Trans Temp Gauge • 100°-260° ( Full Sweep) (includes 1/8 NPT temp sender) AM-8558 $ 168.95 AM-8557 $ 168.95 AM-7557 $182.95 AM-4957 $179.95 2” Trans Temp Gauge • 100°-250° (Short Sweep) (includes 1/8 NPT temp sender) AM-8550 $84.95 AM-8549 $87.95 AM-7549 $89.95 AM-5757 $68.95 AM-4949 $88.95 AM-4357 $72.95 AM-2640 $74.95 2” Oil Pressure Gauge • 0-100 psi (1/8 NPT sender and 1/4 NPT fittings/adapters) AM-7527 $115.95 AM-5727 $96.95 AM-4927 $111.95 AM-4327 $94.95 AM-2634 $92.95 2” Fuel Rail Pressure Gauge • 0-30,000 psi (‘03-‘07, 5.9L trucks) AM-8586 $208.95 AM-7586 $216.95 AM-5786 $172.95 AM-4386 $181.95 AM-2686 $179.95 2” Fuel Rail Pressure Gauge • 0-30,000 psi (‘07.5+, 6.7L trucks) AM-8594 $208.95 AM-8593 $208.95 AM-5793 $172.95 AM-2693 $174.95 LED Lighting Dimmer Designed to allow isolated dimming for all AutoMeter gauges with LED lighting separate from OEM dash. AM-9114: $43.95 H TDR74, p8-10
FREE SHIPPING
CS2/cts2/CTS3 A-Pillar Mount
‘10-‘18 Adapter kit included with 38406. ‘03-‘09 CTS3
A-PILLAR
MOUNT ‘19-‘23 2500/3500 EDGE-38603: $59.95 ‘10-‘18 1500/2500/3500/4500/5500 EDGE-38602: $59.95 NEW! ‘06-‘09 1500/2500/3500 EDGE-38600: $59.95 NEW! ‘19-‘23 ‘03-‘05 Coming Soon!
ALUMINUM
GAUGE
Gauge Gizmo I
Single Pod ( Black only)
‘10-‘18 GM-DG-13117: $77.95
Some trimming of the base required.
‘03-‘09 GM-DG-15212: $39.95 ‘98-‘02 GM-DG-15204: $37.95
‘94-‘97 GM-DG-15201: $36.95
‘86-‘93 GM-DG-15199: $37.95
Dual Pod ( Black only)
‘98-‘02 GM-DG-15203: $45.95
‘94-‘97 GM-DG-15200: $44.95
‘86-‘93 GM-DG-15198: $44.95
Full A-Pillar Triple and Dual Covers
TRIPLE FULL PILLAR I
‘10-‘18 (Color-Matched)
‘03-‘09 (Color-Matched)
‘98-‘02, w/tweeter (Black only)
‘98-‘02, w/o tweeter (Black only)
‘94-‘97 (Black only)
DOUBLE FULL PILLAR I
‘10-‘18 (Color-Matched)
‘03-‘09 (Color-Matched)
‘98-‘02, w/tweeter (Black only)
‘98-‘02, w/o tweeter (Black only)
‘94-‘97 (Black only)
GM-DG-17219: $99.95
GM-DG-17213: $99.95
GM-DG-17205: $88.95
GM-DG-1720 3 : $92.95
GM-DG-17201: $93.95
GM-DG-17218: $99.95
GM-DG-17212: $96.95
GM-DG-17204: $86.95
GM-DG-17202: $85.95
GM-DG-17200: $87.95
Gauge mounts for ‘03-‘09 trucks available in custom-colored molded plastic (not painted) for an exact match. ‘10-‘22 matches very closely, but not 100%. ‘94-‘02 model years come in molded black plastic that can be custom-painted to match the interior.
Single A-Pillar Replacement, ‘03-‘09
GM-DG-ZL39TL2: $79.95
When we found this MOPAR A-pillar with the molded-in single gauge pod (used in the SRT-10 Ram truck), we were impressed.
This A-pillar replacement is molded in the correct texture and color. Includes gauge pod, and the grab handle. It works perfectly with any standard 2” gauge.
NOTE: Reuse factory A-pillar screw hole covers. Not included with gauge mount. New covers available on page 52.
Steering Column
GAUGE Mounts I
These single or dual pod mounting pods are a custom way to mount gauges. The Gauge Gizmo puts your preferred gauge up high on the A-pillar of your truck. Gauge Gizmos come in molded black plastic and can be custom painted to match your truck’s interior.
Acu Temp Adapter (‘89-‘23, 5.9L & 6.7L) I
ACUTEMP_ADAPTER: $35.00
The Acu Temp Adapter allows you to install any 1/8 NPT temperature sender on your cooler line. It takes less than five minutes to install over the cooler line. You never have to touch the transmission fluid, so you have no concern over fluid contamination.
NOTE: Experience has shown that the temperature readings using this adapter are 30° cooler than temperatures in the pan.
Boost Adapter (‘98.5-‘23)
RLT_ADAPTER: $7.50 I
Works with 5.9L & 6.7L engines.
Access the pressurized intake air system with this adapter for use with a boost gauge. Remove an intake manifold bolt, replace it with our Boost Adapter that has a hole in it, and you now have access to pressurized air.
OBDII SPLITTER CABLE ASSEMBLY
AM-5323: $39.95
This low profile Auto Meter OBD-II signal splitter / pass through allows for remote location of connections for DashLink instrumentation while providing an additional easy to access connection point for other onboard devices requiring access to the OBD-II data stream.
‘91- ‘02
DUAL Mount Steering Pod (‘10-‘18) GM-DG-15017: $50.95
SINGLE Mount Steering Pod (‘10-‘18) GM-DG-15015: $47.95
DUAL Mount Steering Pod (‘03-‘09) GM-DG-15014: $52.95
SINGLE Mount Steering Pod (‘03-‘09) GM-DG-15013: $47.95
SINGLE Mount Steering Pod (‘91-‘02) GM-DG-15012: $50.95
(Dual mount not available for ‘91.-‘02.)
AutoMeter single and a dual steering column pods put the gauges right in front of you in an easy to see location. These gauge mounts are a cover and attach to the existing steering column cover.
Molded in black plastic, they can be painted to match your truck’s interior. Receives most standard 2” gauges.
Geno’s Garage OBDII
Port lock & tune saver (‘96-‘23)
GG-TUNESVR $50.95
This tune saver is designed to keep unauthorized persons from accessing your truck’s computer through its OBDII port. It prevents such things as changing programming, changing performance parameters or accessing vehicle specific data such as key codes. Includes one secure key. Additional keys available on page 13.
3 Circuit Top Tap Connector
3CIRCUIT_TOP_TAP: $1.99
Provides easy access to power for all of your truck accessories.
MICRO FUSE KIT (‘13-’22, 1500/2500/3500)
GG-FUSEMICRO: $22.95
Try finding these micro fuses at any outlet other than a Ram dealer. Good luck. We heard you loud and clear. Here is our micro fuse kit for newer Ram trucks.
2 each micro fuses: 5 amp
• 10 amp
• 15 amp
2 each M case time delay fuses: 20 amp
• 20 amp
• 25 amp
• 25 amp
• 30 amp
1 each M case time delay fuse: 60 amp cartridge fuse
•
• 30 amp
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 44 Ram Turbo Diesel Parts & Accessories #121 GAUGES, GAUGE MOUNTS & ACCESSORIES
‘10 - ‘18 ‘03- ‘09
Gauge mounts available in Black only.
SEE OUR WEB SITE FOR OUR FULL LINE OF GAUGE MOUNTS.
RAM 2500/3500
Battery CABLE KITS
After having many requests for replacement battery cables (typically Mopar cost are over $400 a set), one of our customers suggested we call Vince at CustomBatteryCables.com.
We called Vince.
The short version of the story, Vince builds a great product. So much so that his custom cables could takes days before they could be shipped. To eliminate the hassle of one at a time, Vince built us a quantity of cable sets. We stock them, he doesn’t have to answer the phone. His quality is unsurpassed. Vince has been making cables for heavy equipment and trucks for over 20 years. These Ram replacement cable kits are built from 2/0 (“two-aught”) cable for the starter and engine block grounds. After he crimps the heavy-duty copper terminals with a 12-ton hydraulic crimper, he seals the connection with adhesive lined heat shrink which helps prevent battery acid and acid fumes from corroding the cables. Cables are shipped with split loom, nuts and bolts with anti-corrosion plating and connectors and heat shrink to complete the splice. Battery terminals and covers are also included.
Here are the part numbers that you’ll need.
‘07.5-‘09, 6.7L*
BAT-DDG35KIT: $358.95
‘03-‘07, 5.9L*
BAT-DDG3KIT: $339.95
‘98.5-‘02, 24V *
BAT-DDG25KIT: $349.95
‘94-‘98, 12V *
BAT-DDG2KIT: $309.95
Battery Terminals
POSITIVE Post (Red) UBT-840P: $14.99
NEGATIVE Post (Black) UBT-840N: $14.99
‘89-‘93, SINGLE BATTERY BAT-DDG1KIT: $139.95
If the original battery terminals in your Ram truck are broken or corroded, replace them with these heavy-duty battery terminals. They clean up the engine bay nicely.
Brite Box The Brite Box module plugs right into your Ram’s existing wiring harness and allows simultaneous operation of the high and low beams without placing any additional loads on the vehicle’s stock headlight switches or wiring. The Brite Box goes in-series to your existing wiring harness. Unplug the harness from the light and plug it into the Brite Box.
For those truck owners who want the high beams, low beams AND fog lights to be illuminated, you will need to purchase the Brite Box model for your truck that has Fog Light Control (FLC).
Fogster As you know, the lighting system will turn the fog lights off when the high beams are activated. The FOGSTER will keep the fog lights illuminated with the high beams on. Fogster-SD8 works with ‘06-‘09 trucks with factory fog lights; FogsterSD7 works with ‘03-‘05 trucks.
Bulbzilla Allows you to upgrade your factory fogligh bulb from a (1000 lumens) 9006 bulb to a (1700 Lumens) 9005 bulb. Increasing your light output 700%.
‘94-‘02 “Sport” Headlight Conversion H TDR77, p106-107 Converts stock ‘94-‘02 single bulb headlight to the ‘99-‘02 Sport two bulb headlight.
Second Generation truck owners have read about converting the stock single bulb (high and low filament) to a dual bulb “Sport” arrangement that Dodge offered in Sport models from ‘99-‘02. TDR 77, pages 106-107, has the details on the conversion. For wiring purposes you need a Brite Box “Sport” Headlight Conversion and the headlights from DEPO (‘99-‘02 with Sport Package).
18” - 4 Gauge Cable With fusible link for stock alternator.
Various Years BAT-893: $41.95
18” - 2 Gauge Cable With fusible link for 180 amp and above alternators.
Grid Heater Relay Wires - With fusible link and single 6 gauge relay wire. 14.5” long.
Grid Heater Relay Wires - 8 gauge dual relay wires. Wires different length. 11.5” battery to relay and 16” battery to relay.
Grid Heater Relay Wires - 8 gauge dual relay wires. Wires are the same length. 16” to battery.
Various Years BAT-1971: $5.00
Various Years BAT-895: $41.95 Alternator Terminal Cover
Various Years BAT-891: $32.95
Various Years BAT-4467: $45.95
Various Years BAT-14259: $46.95
Relay to Grid Heater Wires - 2 long wires wrapped in loom, 1 short wire wrapped in loom, 4 terminal covers. ‘03-‘05 5.9L BAT-37529: $84.75
SourcePWR
SMART IGNITION POWER MODULE
ROSTRA_250_2951: $29.95
Before the days of your truck having a module-for-this and a module-for-that, an owner would simply tie into an ignition “On” power source and power a relay to add additional circuits.
With the Rostra SourcePWR you no longer have to poke and prod for the ignition on signal. The SourcePWR goes directly to the battery and it is triggered on and off (a smart logic circuit) by the voltage drop when you engage the starter. The SourcePWR can then be used to add a 7.5amp circuit to your truck.
Box (‘99-‘02,
& ‘99-‘01,
without Sport Package and with Fog Light Control
Brite Box (‘94-‘98, 1500/2500/3500)
Brite Box (‘94-‘98, 1500/2500/3500) with Fog Light Control
Brite Box (‘89-‘93, 150/250/350)
Brite Box (‘89-‘93, 150/250/350) with Fog Light Control
Fogster (‘06-‘09, 2500/3500 & ‘06-‘08, 1500)
BB-4B-FLC-U: $119.99
BB-4: $94.99
BB-4-FLC-U: $119.99
BB-4L: $94.99
BB-4L-FLC-U: $119.99
BB-FOG-SD8-6: $109.99
Fogster (‘03-‘05, 2500/3500 & ‘02-‘05, 1500) BB-FOG-SD7-6: $109.99
Bulbzilla (‘03-‘09, 2500/3500 & ‘02-‘08, 1500)
Brite Box ‘Sport’ Headlight Conversion without Fog Light Control
Read about the conversion on our website in ‘Tech Information’.
Brite Box ‘Sport’ Headlight Conversion with Fog Light Control
$20.99
$149.99
Order 770-886-2500 or genosgarage.com 45 Product prices subject to change without notice.
ELECTRICAL ACCESSORIES & BATTERY CABLES
STANDARD APPLICATIONS PART# Brite Box (‘06-‘09, 2500/3500 & ‘06-‘08, 1500) BB-SDK8: $209.99 Brite Box (‘06-‘09, 2500/3500 & ‘06-‘08, 1500) with Fog Light Control BB-SDK8-FLC-6: $249.99 Brite Box (‘03-‘05, 2500/3500 & ‘02-‘05, 1500) BB-SDK7: $209.99 Brite Box (‘03-‘05, 2500/3500 & ‘02-‘05, 1500) with Fog Light Control BB-SDK7-FLC-6: $249.99 Brite Box (‘99-‘02, 2500/3500 & ‘99-‘01, 1500) with Sport Package BB-7B: $94.99 Brite Box (‘99-‘02, 2500/3500
‘99-‘01, 1500)
Package
Control BB-7B-FLC-U: $119.99 Brite Box
2500/3500
‘99-‘01, 1500)
BB-4B: $94.99
&
with Sport
and Fog Light
(‘99-‘02,
&
without Sport Package
Brite
2500/3500
1500)
BB-BFH-6-5:
‘94-‘98 ‘99-‘02 BB-4274:
BB-4274B:
$149.99
‘94-‘98 ‘99-‘02 BB-4274-FLC-U: $178.99 BB-4274B-FLC-U: $178.99
ELECTRICAL REPAIR HARNESS CONNECTORS W/PIGTAIL
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 46 Ram Turbo Diesel Parts & Accessories #121 ELECTRICAL ACCESSORIES CUMMINS 2-wire Coolant Temp Connector Repair Kit (‘98-‘02) & (‘04.5-‘23) Fits 4954905 & 3920364 coolant temp sensors. 5394261 $44.95 CUMMINS Turbo Speed Sensor Wiring Harness (‘07.5-‘18, 6.7L) For speed sensors #5550064 & #5550060. 3164369 $38.95 Cummins Water-in-Fuel Sensor Repair Connector (‘00-‘02) 3823256 $13.95 CUMMINS Fuel Control Actuator Repair Harness (‘03-‘18, 5.9L & 6.7L) 3164098 $50.95 CUMMINS Fuel Injection Harness with Plug (‘03-‘05, 5.9L) Attaches to rocker housing. (3) required per engine. Sold individually. 3966805 $87.95 MOPAR MAP Sensor Wiring Harness Repair Connector Kit (‘03-‘07, 5.9L) For use with MAP sensor 3971106 5143782AA $17.95 MOPAR MAF Sensor Repair Connector (‘07.5-‘18, 6.7L) Repair connector for Sensor #4984760. 5013979AB $41.95 CUMMINS 3-wire Connector Repair Kit (‘89-‘93 & ‘94-‘97) Fits 4327029 and TPS3930318 3823255 $17.95 MOPAR Crank/Cam Position Sensor Wiring Repair Kit (‘03-‘18, 5.9L & 6.7L) Works with 5594275. 5014010AB $31.95 MOPAR Rail Pressure Sensor Connector Repair Kit (‘03-‘07, 5.9L) 5143781AB $31.95 MOPAR Wastegate Solenoid Repair Harness Connector Kit (‘03-‘07, 5.9L) and Fuel Heater Thermostat (3900349S) 68043086AC $24.50 MOPAR TPS Repair Connector Kit - Manual Transmission (‘03-‘04, 5.9L 2500/3500) 68032364AA $59.95 Engine Mount Aftermarket Water-in-Fuel Sensor Repair Connector (‘07.5-‘22, 6.7L) Also works with ‘98.5 to ‘02 fuel lift pump. Works with 3911940-S. GG-RC68610 $8.95 Fuel Tank Module Wiring Harness Adapter For ‘94-’95 Ram 2500/3500 trucks to use the ‘96-‘97 fuel tank module/sending unit. GG-WHADAPT9495 $19.95 CUMMINS Diesel MAP Sensor and Intake Air Temperature Repair Connector (‘07.5-‘18, 6.7L) For Sensors 2897333NX, 2897332NX, PAI-050624, & PAI-050634. 5299163 $75.95 MOPAR Fan Clutch Connector Repair Kit ‘10-‘12, 6.7L 2500/3500 ‘11-‘12, 3500/4500/5500 C&C Main harness side. 68032864AA $106.95 MOPAR Fan Clutch Connector Repair Kit ‘03-‘09, 2500/3500 ‘08-‘10, 3500/4500/5500 C&C Main harness side. 68052582AB $61.95 MOPAR Intake Air Temperature Sensor Connector Repair Kit (‘03-‘07, 5.9L) 2 wire connector for sensors 4984570 & 68430063AA. May fit other sensors. 05143777AA $25.95 MOPAR EGT Sensor Connector Repair Kit (‘13-‘18, 6.7L) 2 wire connector for sensor #68085774AB. May fit other sensors. 68242368AB $38.95 GENO’S Fuel Injector Harness Repair Pigtail Connector (‘03-‘05, 5.9L) GG-INJRH0305G $31.95 MOPAR Wiring Repair Connector DEF Injector (‘13-’23, 2500/3500) NEW! 5183448AA $36.95
Crankshaft & Camshaft Sensor ‘98.5-‘02, 5.9L, 24V NEW! FLEECE FPE-HAR-CUMM-VP-CCPT CUMMINS 3823254 $22.04 $19.25 2 Wire Multi-use Connector & Pigtail ‘00-‘07, 5.9L Fuel Heater · ‘13-‘18, 6.7L Fuel Heater · ‘04.5-‘07, 5.9L Turobo Wastegate Replaces Cummins 5572791 NEW! FLEECE FPE-HAR-CUMM-FH-PT $18.89 2 Wire Multi-use Connect & Pigtail #2 ‘07.5-‘18, 6.7L EGR Pressure Sensor 4928594 · ‘07.5-‘18, 6.7L EGR Temperature Sensor ‘02-‘18, Oil Pressure Switch · ‘97-‘12, 5.9L & 6.7L A/C Pressure Switch Replaces Cummins 5017117AA and 5019913AA NEW! FLEECE FPE-HAR-MU-PT-2 MOPAR 05017117AA $34.64 $30.50 3 Wire Exhaust Pressure Connector/Pigtail ‘07.5-‘18, 6.7L Exhaust Pressure Sensor 4928594 NEW! FLEECE FPE-HAR-MU-PT-3 $35.69 Injector Connector/Pigtail ‘06-‘23, 5.9L & 6.9L NEW! FLEECE FPE-HAR-CUMM-INJ-PT CUMMINS 5395297 $24.14 $94.95 2 Wire IAT & EGT ‘13-‘22, 6.7L Intake Air Temp 05149279AA, AB, & AC · ‘07.5-‘19, 6.7L EGT Sensor 2872858 NEW! FLEECE FPE-HAR-CUMM-IAT-PT $28.34 VGT Actuator Harness Adaptor Allows early 2007.5-2012 6.7L trucks
turbo. NEW! FLEECE FPE-34425 $44.95 Starter Solenoid Connector w/Pigtail ‘03-‘18, 5.9L &6.7L, 2500/3500 NEW! FLEECE FPE-HAR-CUMMSTPT0318 $37.75 Cooling Fan Clutch Connector w/Pigtail ‘03-‘12, 5.9L &6.7L, 2500/3500 Includes both male and female connectors. NEW! FLEECE FPE-HAR-CUMM-CF-0312 $62.99 Cooling Fan Clutch Connector w/Pigtail ‘13-‘22, 5.9L &6.7L, 2500/3500 Includes both male and female connectors. NEW! FLEECE FPE-HAR-CUMM-CF-1322 $62.99
to use the later model 2013 and up
‘19-‘23, 2500/3500 with large 10” wide sensor attached to rearview mirror.
CI-11685: $81.99
‘10-‘18, 2500/3500
‘09-‘18, Ram 1500
‘19, Ram 1500 Classic
CI-11150: $81.99
WINDSHIELD SUNSHADE
‘19-‘23, 2500/3500 with standard rearview mirror.
CI-11687: $81.99
‘03-‘09, 2500/3500
CI-10804: $81.99
Wheelskins
All Colors/Years: $49.95
‘19-‘23, 2500/3500 with small 5” wide sensor attached to rearview mirror.
CI-11686: $81.99
‘94-‘02, 2500/3500
CI-10558: $81.99
Heat Shield Storage Bag - Universal Kit: ZUBAGV6: $11.99.
Keep the interior of your truck cooler and protect the dash from harsh UV rays with a UVS heat shield by Covercraft.
The outward-facing surface is high-quality silver reflective fabric; the inside is soft pellon felt. Both fabrics are laminated to a stiff foam board which acts as an insulator to reduce heat build-up.
The laminated stiff board is what makes this item perfect for longer term, RV-type parking. For short trips, the board’s accordion-like folds make removal/installation easy.
2020-2022 Ram 1500 sunshades available online.
PLASTICS PAINT & PREP
ColorBond Leather, Vinyl and Hard Plastic Refinisher are perfect for painting your ‘98-‘02 Ram truck’s interior part to match the original. They go on easy, offer great coverage and dry fast. If applied properly, it will not flake, crack or peel and will provide years of protection with no special care needed.
For professional long lasting results, we recommend that after roughing the entire surface with a ScothBrite pad, ColorBond’s Prep Cleaner is perfect for wiping away dust, oil and grease contaminants, giving you a perfect foundation for success.
Next, we have ColorBond Adhesion Promoter which strengthens the bond between the paint and plastic which provides the greatest durability to the finish. After prepping with cleaner, simply shake well, apply a nice even coat, allow to dry for 10 minutes and then apply your color.
INTERIOR PAINT
CHRYSLER AGATE, ‘98-‘02 CB-1001-163: $19.95
CHRYSLER DARK MIST GRAY, ‘98-‘02 CB-1001-166: $19.95
INTERIOR & EXTERIOR PAINT
SKID MARK BLACK (Satin Black ) CB-1003-144: $19.95
PREPARATION
PREP CLEANER CB-1006-09: $9.95
ADHESION PROMOTER CB-1007-215: $18.95
PAINT REFINISH KITS
Kits include: (1) Can 12oz. paint, (1) Bottle 4oz. Prep Cleaner, (1) Can 12oz. Adhesion Promoter, (1) ScotchBrite Pad
CHRYSLER AGATE KIT CM-KIT-163: $46.50
CHRYSLER DARK MIST GRAY KIT CM-KIT-166: $46.50
SKID MARK BLACK KIT CM-KIT-144: $46.50
Wheelskins Genuine Leather Steering Wheel Covers are some of the finest wheel covers you’ll find anywhere. They are hand-crafted in California from choice domestic cowhide and their exclusive patented lacing hole reinforcement design ensures a tight custom fit. They are easy to install and are a perfect fit on your Ram’s steering wheel.
BLACK WSS01-01
GRAY WSS01-14
SAND WSS01-18 ‘05-‘11
BLACK WS102C-01
GRAY WS102C-14
SAND WS102C-18
BLACK WS102XX-01
‘98-‘04
GRAY WS102XX-14
SAND WS102XX-18
BLACK WS102X-01
‘89-‘97
Accessory/CB Mount (‘94-‘09)
‘03-‘09 WD_CB_0309: $56.95
‘94-‘02 WD_CB1: $56.95
GRAY WS102X-14
SAND WS102X-18
The mounting bracket uses the existing center seat bolts to hold it in place. The mounting surface for an accessory is 13” wide by 4.5” tall.
To attach your accessories/CB, you drill holes through the mount to correspond with the attachment points of your accessory/CB.
This mount allows the use of the dash mounted cup holder and has clearance for the 4WD lever.
The CB face, in most cases, will be flush with the vinyl/cloth line at the seat front. The bracket is painted satin black for rust protection.
NOTE: Fits ‘06-‘09 with 40/20/40 seats only.
NOTE: May not work with large CBs in trucks equipped with a manual transmission. Check for clearance.
Order 770-886-2500 or genosgarage.com 47 Product prices subject to change without notice. INTERIOR PARTS & ACCESSORIES
* Will not work with heated steering wheel option. * Please check steering wheel size before ordering. Fits 15-1/2” x 4-3/8”.
APPLICATIONS ‘12-‘18*
* Will not work with heated steering wheel option.
‘94-‘02
NOTE: In ‘03-‘09 trucks, the mount may interfere with the lower seat compartment handle.
‘03-‘09
Cannot ship to Alaska or Hawaii. No Air or Expedited shipping. Ground service only.
seatsaver custom fit SEAT COVERS
Protect and preserve your truck’s upholstery with quality seat covers by Covercraft that provide superior coverage against dirt, dust, and debris, while shielding the original fabric from damaging UV rays that cause dulling and fading.
Covercraft’s SeatSaver line of covers are made with heavy-duty polycotton material that has the rugged performance and feel of denim. Their covers are machine washable and designed for quick installation and removal. Sold per row. with all applicable headrests, console covers, and armrests included per set. (Console cover is included except for bucket seat applications).
FRONT SEAT STYLE
Mega/Crew/Reg (‘22, 2500/3500)
Bucket seats w/adjustable headrests and seat airbags. Fits Limited, Laramie Longhorn & Tradesman.
All Cabs (‘19-‘22, 4500/5500)
40/20/40 seats with adjustable headrests, folddown console w/3 cupholders & lid, with seat airbag, without center storage and without tray. Does not fit Laramie or Sport.
Laramie - All Cabs (‘19-‘21, 2500/3500)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with or without center storage.
Laramie - All Cabs (‘19-‘21, 2500/3500)
Bucket seats w/adjustable headrests and seat airbags.
All Cabs (‘19-‘22, 2500/3500)
Bucket seats w/adjustable headrests and seat airbags. Does not fit Laramie
All Cabs (‘19-‘22, 2500/3500)
40/20/40 seats w/adjustable headrests, fold-down console w/3 cupholders & lid, w/seat airbag, with or without center storage w/built-in storage drawer.
All Cabs (‘17-‘22)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with or without center storage. Also fits 2019-2022 1500 Classic.
Laramie/Sport (‘14-‘18)
Bucket seats with adjustable headrests and seat air bags. This seat configuration has a big factory console between the seats.
See our website for our full line of Covercraft Seat Covers including those for the Ram 1500.
REAR SEAT STYLE /YEAR COLOR/PART# PRICE
Crew/Quad Cab (‘11-‘22)
60/40 split seats with 3 adjustable headrests with fold-down armrest.
Crew/Quad Cab (‘11-‘22)
60/40 split seats with 3 adjustable headrests (2 large, 1 small) without fold-down armrest.
Crew Cab (‘10) 2500/3500
60/40 split seats w/3 adj. headrests & fold-down cup holder.
Mega Cab (‘06-‘07 and ‘10-‘22)
60/40 split seats w/adj. headrests and fold-down cup holder.
Quad Cab 60/40 (‘04-‘08)
60/40 with adjustable headrest.
Quad Cab Full Bench (‘04-‘09)
Full bench with adjustable headrests.
Quad Cab Full Bench (‘03)
Seats without headrests.
Quad Cab 60/40 (‘03)
Seats without headrest.
All Cab Styles (‘94-‘02)
Charcoal SS-8396-CCCH
Mist Gray SS-8396-CCCT
Wet Sand SS-8396-CCSA
Charcoal SS-8397-CCCH
$259.99
$259.99 Mist Gray SS-8397-CCCT
Wet Sand SS-8397-CCSA
Charcoal SS-8385-CCCH
$259.99 Mist Gray SS-8385-CCCT
Wet Sand SS-8385-CCSA
Charcoal SS-8363-CCCH
Mist Gray SS-8363-CCCT
Wet Sand SS-8363-CCSA
Charcoal SS-7366-CCCH
Mist Gray SS-7366-CCCT
Wet Sand SS-7366-CCSA
Charcoal SS-7361-CCCH
Mist Gray SS-7361-CCCT
Wet Sand SS-7361-CCSA
Charcoal SS-6348-CCCH
Mist Gray SS-6348-CCCT
Wet Sand SS-6348-CCSA
Charcoal SS-7347-CCCH
Mist Gray SS-7347-CCCT
Wet Sand SS-7347-CCSA
Charcoal SS-6271-CCCH
$259.99
All Cabs (‘13-‘16)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and without center storage.
All Cabs (‘13-‘16)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with center storage.
Laramie (‘12-‘13)
Bucket seats with adjustable headrests. This configuration has a big factory console between the seats.
Reg/Mega/Crew/Quad (‘11-‘16) 1500/2500/3500
Bucket seat with adjustable headrests with seat airbag. Does not fit Laramie or Sport
Mega/Quad/Reg (‘06-‘09)
40/20/40 seats with adjustable headrests and fold down console (covered).
Mega/Quad/Reg (‘06-‘09)
Charcoal SS-2588PC-CH
Gray SS-2588PC-GY
Charcoal SS-3486PC-CH
Gray SS-3486PC-GY
Charcoal SS-3483PC-CH
Gray SS-3483PC-GY
Charcoal SS-2545PC-CH
Gray SS-2545PC-GY
Charcoal SS-2544PC-CH
Gray SS-2544PC-GY
Charcoal SS-3484PC-CH
$208.99
$252.99
$252.99
$208.99
$208.99
$252.99 Gray SS-3484PC-GY
Charcoal SS-3457-PCCH
Mist Gray SS-3457-PCCT
Wet Sand SS-3457-PCSA
Charcoal SS-2476-CCCH
Mist Gray SS-2476-CCCT
Wet Sand SS-2476-CCSA
Charcoal SS-3435-CCCH
Mist Gray SS-3435-CCCT
Wet Sand SS-3435-CCSA
Charcoal SS-3438-CCCH
Mist Gray SS-3438-CCCT
Wet Sand SS-3438-CCSA
Charcoal SS-2450-CCCH
Mist Gray SS-2450-CCCT
Wet Sand SS-2450-CCSA
Charcoal SS-2459-CCCH
Mist Gray SS-2459-CCCT
Wet Sand SS-2459-CCSA
Charcoal SS-3372-CCCH
$252.99
$208.99
$252.99
$252.99
$208.99
$208.99
$252.99 Mist Gray SS-3372-CCCT
Wet Sand SS-3372-CCSA
Charcoal SS-2398-CCCH
$199.99
$199.99
$119.99
$199.99
$119.99 Gray SS-6271-CCGY
Taupe/Tan SS-6271-CCTP
Bucket seats with adjustable headrests.
Quad Cab/Reg (‘04.5-‘05)
40/20/40 seats with adjustable headrests, with opening for lumbar dial and fold-down console (covered).
Quad Cab/Reg (‘03-‘04)
40/20/40 seats with adjustable headrests, without opening for lumbar dial and fold-down console (covered).
Quad Cab (‘98-‘02) 40/20/40 seats.
Std Cab (‘98-‘02) Std/Ext/Club Cab (‘94-‘97 ) 40/20/40 seats.
$208.99 Mist Gray SS-2398-CCCT
Wet Sand SS-2398-CCSA
Charcoal SS-3358-CCCH
Mist Gray SS-3358-CCCT
Wet Sand SS-3358-CCSA
Charcoal SS-3344-CCCH
Misty Gray SS-3344-CCCT
Wet Sand SS-3344-CCSA
Charcoal SS-3251-CCCH
$252.99
$252.99
$252.99 Gray SS-3251-CCGY
Taupe/Tan SS-3251-CCTP
Charcoal SS-3250-CCCH
$252.99 Gray SS-3250-CCGY
Taupe/Tan SS-3250-CCTP
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 48 Ram Turbo Diesel Parts & Accessories #121 INTERIOR PARTS & ACCESSORIES
/YEAR COLOR/PART# PRICE
ADJUSTMENT CONTROL CUTOUTS WHERE NECESSARY HEADREST COVERS SEATBELT & SAFETY RESTRAINT ACCESS POINTS STORAGE POCKETS
DOUBLE-STITCHED
OVERLAPPED
SEAMS
ARMREST & CONSOLE COVERS
FRONT SEAT STYLE
Select Cabs (‘22, 2500/3500)
Bucket seats with adjustable headrests and seat air bags.
Fits Regular, Crew and Mega Cabs; Limited, Laramie Longhorn and Tradesman
All Cabs (‘17-‘22, 4500/5500)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with or without center storage with or without built-in storage tray.
Does not fit Laramie or Sport.
Laramie - All Cabs (‘19-‘21, 2500/3500)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with or without center storage.
Laramie - All Cabs (‘19-‘21, 2500/3500)
Bucket seats with adjustable headrests and seat air bags.
All Cabs (‘19-‘22, 2500/3500)
Bucket seats with adjustable headrests and seat air bags.
Does not fit Laramie.
All Cabs (‘19-‘22, 2500/3500)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with or without center storage with built-in storage tray.
Does not fit Laramie.
All Cabs (‘17-‘22)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with or without center storage. Also fits 2019-2022 1500 Classic.
Laramie/Sport (‘14-‘18)
Bucket seats with adjustable headrests and seat air bags. This seat configuration has a big factory console between the seats.
All Cabs (‘13-‘16)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and without center storage.
All Cabs (‘13-‘16)
40/20/40 seats with adjustable headrests, fold-down console w/3 cupholders & lid, seat airbag and with center storage.
Reg/Mega/Crew/Quad (‘11-‘16)
1500/2500/3500
Bucket seat with adjustable headrests with seat airbag. Does not fit Laramie or Sport
Laramie (‘12-‘13)
Bucket seats with adjustable headrests. This configuration has a big factory console between the seats.
Mega/Quad/Reg (‘06-‘09)
40/20/40 seats with adjustable headrests and fold down console (covered).
Mega/Quad/Reg (‘06-‘09)
Bucket seats with adjustable headrests.
Quad Cab/Reg (‘04.5-‘05)
40/20/40 seats with adjustable headrests, with opening for lumbar dial and fold-down console (covered).
Brown SS-2588CA-BN
Gravel SS-2588CA-GY
CARHARTT custom fit SEAT COVERS
$292.99
Brown SS-3486CA-BN $356.99
Gravel SS-3486CA-GY
Brown SS-3483CA-BN
Gravel SS-3483CA-GY
Brown SS-2545CA-BN
Gravel SS-2545CA-GY
Brown SS-2544CA-BN
Gravel SS-2544CA-GY
Brown SS-3484CA-BN
Gravel SS-3484CA-GY
Brown SS-3457CA-BN
Gravel SS-3457CA-GY
Brown SS-2476CA-BN
Gravel SS-2476CA-GY
Brown SS-3435CA-BN
Gravel SS-3435CA-GY
Brown SS-3438CA-BN
Gravel SS-3438CA-GY
Brown SS-2459CA-BN
Gravel SS-2459CA-GY
Brown SS-2450CA-BN
Gravel SS-2450CA-GY
Brown SS-3372CA-BN
Gravel SS-3372CA-GY
Brown SS-2398CA-BN
Gravel SS-2398CA-GY
Brown SS-3358CA-BN
Gravel SS-3358CA-GY
$356.99
$292.99
$292.99
Covercraft’s Carhartt seat covers provide tough-as-nails water-resistant duck weave fabric, in the classic Carhartt colors.
Machine washable and designed for quick installation and removal. Sold per row.
Quad Cab/Reg (‘03-‘04)
40/20/40 seats with adjustable headrests, without opening for lumbar dial and fold-down console (covered).
$356.99
$356.99
$292.99
See our website for our full line of Carhartt seat covers including those for the Ram 1500.
$356.99
REAR SEAT STYLE /YEAR
Crew/Quad Cab (‘11-‘22)
60/40 split seats with 3 adjustable headrests with fold-down armrest.
Brown SS-8396CA-BN
Gravel SS-8396CA-GY
$369.99
$356.99
Crew/Quad Cab (‘11-‘22)
60/40 split seats with 3 adjustable headrests (2 large, 1 small) without fold-down armrest.
Brown SS-8397CA-BN
Gravel SS-8397CA-GY
$369.99
$292.99
Crew Cab (‘10)
2500/3500
60/40 split seats w/3 adj. headrests & fold-down cup holder.
Brown SS-8385CA-BN
Gravel SS-8385CA-GY
$369.99
$292.99
Mega Cab 60/40 (‘06-‘07 & ‘10-‘22) 60/40 with adjustable headrest.
Brown SS-8363CA-BN
Gravel SS-8363CA-GY
$369.99
$356.99
$292.99
$356.99
Brown SS-3344CA-BN
Gravel SS-3344CA-GY
$356.99
Quad Cab 60/40 (‘04-‘08) 60/40 with adjustable headrest.
Quad Cab Full Bench (‘04-‘09) Full bench with adjustable headrests.
Quad Cab Full Bench (‘03) Seats without headrests.
Quad Cab 60/40 (‘03) Seats without headrest.
Brown SS-7366CA-BN
Gravel SS-7366CA-GY
Brown SS-7361A-BN
Gravel SS-7361CA-GY
Brown SS-6348CA-BN
Gravel SS-6348CA-GY
Brown SS-8483CA-BN
Gravel SS-8483CA-GY
$287.99
$287.99
$203.99
$369.99
Order 770-886-2500 or genosgarage.com 49 Product prices subject to change without notice. Order 770-886-2500 or genosgarage.com 49 INTERIOR PARTS & ACCESSORIES
/YEAR COLOR/PART# PRICE
PRICE
COLOR/PART#
(‘95-02,
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 50 Ram Turbo Diesel Parts & Accessories #121 INTERIOR
& ACCESSORIES
Heater Core (‘90-‘93, 250/350) GPD-8231305 $65.95 Evaporator (‘89-‘93, 250/350) GPD-4711241 $139.95 Diesel A/C Service Kit (‘92-‘93,
Kit includes:
device/Orifice tube
(if equipped) • O-ring
seal kit GPD-9424594 $49.95 A/C Service Kit
Kit
device/Orifice
(if equipped)
O-ring
kit GPD-9422414 $49.95 Blower Motor with A/C (‘90-‘93, 250/350) GPD-2311283 $59.95 Blower Motor without A/C (‘90-‘93, 250/350) GPD-2311303 $64.95 DORMAN Headlight Switch Repair Pigtail (‘89-‘98) DRM645938 $42.95 MOPAR Replacement Headlight Switch (‘89-‘93) 56021898AB $81.95 DORMAN Window Lift Motor (‘90-‘93) Passenger Side DRM742306 $69.95 DORMAN Window Lift Motor (‘90-‘93) Driver Side DRM742307 $69.95 DORMAN Electric Window Switch (‘89-‘93) Passenger Side DRM901402 $40.95 Automatic Transmission Brake Pedal Pad Set (‘72-‘91, 150/250/350) Includes brake pad and E-brake pad. ** Does not fit ‘92-‘93 trucks. DMTRK7291PP10-A $27.95 Manual Transmission Brake Pedal
Set
Includes brake pad and E-brake pad. ** Does not fit ‘92-‘93 trucks. DMTRK7291PP10-M $29.95
Heater Core
Diesel trucks only. GPD-8231241 $59.95 Evaporator
2500/3500) Diesel trucks only. GPD-4711271 $72.95 Evaporator (‘94, 2500/3500) Diesel trucks only. GPD-4711395 $76.95 A/C Service Kit
2500/3500) Kit includes: Accumulator/Receiver • Expansion device/ Orifice tube • Rear expansion device (if equipped) • O-ring rapid seal kit GPD-9422069 $89.95 A/C Service Kit (‘94-‘97, 2500/3500) Kit includes: Accumulator/Receiver • Expansion device/ Orifice tube • Rear expansion device (if equipped) • O-ring rapid seal kit GPD-9423001 $39.95 MOPAR A/C Evaporator Foam (‘94, 2500/3500) V9900006 $18.95 MOPAR AC/Heater Blower Motor Assembly (‘03-‘09, 2500/3500 ‘08-‘10, 4500/5500 ‘02-‘08, 1500) 5096255AA $152.95 MOPAR AC/Heater Blower Motor Assembly (‘97-‘02, 2500/3500) 5015866AA $155.95 Blower Motor (‘94-‘02, 2500/3500) GPD-2311510 $64.95 MOPAR Blower Motor Wheel (‘94-‘02) 04720009 $52.95 DORMAN Climate Control Blower Motor Resistor (‘94-‘02) DRM973020 $28.95 DORMAN Blower Motor Resistor Repair Pigtail (‘94-‘09) DRM645701 $18.95 DORMAN Airbag Clock Spring (‘94-‘97, 1500/2500/3500) DRM525124 $126.95 DORMAN Airbag Clock Spring w/Audio controls and Speed Controls (‘99-‘02, 2500/3500 & ‘99-‘01, 1500) DRM525104 $103.95
PARTS
1989-1993 FIRST GENERATION
250/350)
Accumulator/Receiver • Expansion
• Rear expansion device
rapid
(‘89-‘91, 250/350)
includes: Accumulator/Receiver • Expansion
tube • Rear expansion device
•
rapid seal
Pad
(‘72-‘91, 150/250/350)
1994-2002 SECOND GENERATION
(‘94-‘02, 2500/3500)
(‘98-‘02,
MOPAR
Order 770-886-2500 or genosgarage.com 51 Product prices subject to change without notice. INTERIOR PARTS & ACCESSORIES 1994-2002 SECOND GENERATION
FOB Case and Buttons - Keyless Entry (‘99-‘05) DRM13628 $8.95
DORMAN
Overhead Console Sunglass Holder
2500/3500 & ‘99-’01, 1500) SN96TL2AA $37.95
Overhead Console Map Light Harness and Switch without Temperature and Compass (‘99-‘02, 2500/3500 & ‘99-’01, 1500) 5013609AA $58.95 MOPAR Overhead Console Map Light Harness and Switch with Temperature and Compass (‘99-‘02, 2500/3500) 5013608AA $63.95
Brake & Clutch Pedal Pad (‘94-‘02) For manual transmission trucks. Also fits ‘94-‘01, 1500. 52009562 $24.95 MOPAR Headlight Switch with Cargo Light & with Foglights (‘99-‘02) 56021675AE $82.95 MOPAR Headlight Switch (‘98) 68148078AA $121.95 MOPAR Headlight Switch (‘94-‘97) Repair harness and connector included. 04886449AB $86.95 DORMAN Headlight Switch Repair Pigtail (‘89-‘98) DRM645938 $42.95 MOPAR Brake Light Switch (‘01-‘09) 5083344AA $21.95 MOPAR Brake Light Switch (‘99-‘00) 5016294AD $20.95 MOPAR Brake Light Switch (‘94-‘98) 4671336AD $24.95 DORMAN Turn Signal Indicator/Muti Function Switch (‘94-‘02 2500/3500 & ‘94-‘01 1500) DRM2330813 $55.95 MOPAR Overdrive Switch (‘98-‘02) 56021048 $20.95 DORMAN Window Lift Motor (‘94-‘02) PASSENGER SIDE DRM742314 $56.95 DORMAN Window Lift Motor (‘94-‘02) DRIVER SIDE DRM742315 $57.95 1994-2002 SECOND GENERATION DORMAN Door Lock Actuator (‘94-‘02) DRIVER DRM931634 $115.95 PASSENGER DRM931635 $142.95 DORMAN Door Latch Reinforcement (‘94-‘02, 2500/3500 & ‘94-‘01, 1500) DRIVER DRM926264 $15.95 PASSENGER DRM926286 $18.95 Door Panel Retaining Pin Kit - Front Doors (‘94-‘02, 2500/3500 & ‘94-‘01, 1500) Kit includes 13 pins. Enough for one front door. Will also work with the rear quad cab doors. GG-DPPK9402 $8.95 DORMAN Power Window and Lock Switch DRIVER SIDE (‘99-‘02) DRM901440 $52.95 DORMAN Power Window Switch - DRIVER SIDE (‘94-‘97, 2500/3500) DRM901458 $30.95 MOPAR 8-way Power Seat Switch - DRIVER SIDE (‘98-‘02, 2500/3500 & ‘98-‘01, 1500) 56045025AA $189.95 MOPAR 6-way Power Seat Switch w/o Lumbar DRIVER SIDE (‘94-‘02 & ‘04-‘09) 56049777AA $72.95 MOPAR Seat Recline Lever - DRIVER SIDE (‘95-‘02, Regular & Extended Cab) 55196021 $19.95 MOPAR Seat Recline Lever - DRIVER SIDE (‘98-‘02, Quad Cab) 5010259AA $69.95 DORMAN Hood Release Cable (‘94-‘05) 1500/2500/3500 DRM912086 $52.95 DORMAN Parking Brake Release Handle ‘98-‘02 ‘98-‘02, 2500/3500 ‘98-‘01, 1500 DRM74934 $31.95 MOPAR Parking Brake Release Handle ‘98-‘02, 2500/3500 ‘98-‘01, 1500 Agate Camel Mist Gray 0RU38LAZAA $49.95 0RU38VK9AA $41.95 0RU38RC8AA $41.95 Fuse Panel Cover (‘94-‘97) Paint to match interior. 5CU60PD5 $23.95
(‘99-‘02,
MOPAR
MOPAR
2003-2009 THIRD GENERATION
DORMAN Door Lock Actuator ‘03-‘09)
DORMAN Door Lock Actuator (‘03-‘09)
MOPAR Power Window Door Switch with Lockout - DRIVER SIDE - Quad Cab
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 52 Ram Turbo Diesel Parts & Accessories #121 INTERIOR PARTS & ACCESSORIES
MOPAR Sun Visor Clip Support ‘03-‘05, 2500/3500 1DC48TL2AA $5.95 MOPAR Sun Visor Clip Support ‘06-‘09, 2500/3500 1DC48BD1AA $5.95 Sun
‘03-‘05, 2500/3500 ‘02-‘05, 1500 MOPAR 1CT17TL2AA $113.95 DORMAN DRM74214 $45.95 DORMAN
(‘03-‘10) Fits
Fits: ‘03-‘09,
‘02-‘08, 1500 ‘08-‘10,
DRM74970 $25.95 DORMAN FOB Case and Buttons - Keyless Entry (‘99-‘05) DRM13628 $8.95 DORMAN Keyless Entry Remote and Programmer (‘03-‘05) DRM99164 $63.95 MOPAR 6-way Power Seat Switch without Lumbar Support - DRIVER SIDE (‘94-‘02 & ‘04-‘09) 56049777AA $72.95 MOPAR Power Seat Switch without Lumbar Support - PASSENGER SIDE (‘04-‘09) 56049776AA $54.95 Window/Lock Switch BezelDRIVER SIDE (‘03-‘05, Quad Cab) Direct replacement part. DARK SLATE DRM76110: $23.95 TAUPE DRM76115: $28.95 Window/Lock Switch BezelPASSENGER SIDE (‘03-‘05, Regular & Quad Cab) Direct replacement part. DARK SLATE DRM76114: $29.95 TAUPE DRM76116: $28.95
Front DRIVER DRM931636:
PASSENGER DRM931637: $80.95
2003-2009 THIRD GENERATION
Visor - Plain - Driver’s Side
Map Light Lense
left or right side map light.
2500/3500 •
4500/5500
$78.95
Rear
DRIVER DRM931644:
PASSENGER DRM931645:
- Quad Cab only.
$79.95
$79.95
(‘03-‘09,
‘08-‘10, 3500/4500/5500 CC) 68171680AB $135.50
PASSENGER SIDE, LEFT
CREW CAB (‘03-‘09, 1500/2500/3500/4500/5500 ‘10, 4500/5500) DRM901437 $20.95
2500/3500
DORMAN Power Window Switch
OR RIGHT REAR
A/C Evaporator (‘07-09, 2500/3500) ‘08-10, 3500/4500/5500 Cab/Chassis ‘06-09, 2500/3500 built after 3/17/06 ‘06-08, 1500 built after 3/17/06 GPD-4711829 $91.95 MOPAR A/C Evaporator ‘08-10, 3500/4500/5500 Cab/Chassis ‘06-09, 2500/3500 built after 3/17/06 ‘06-08, 1500 built after 3/17/06 68004242 $319.00 Evaporator (‘03-‘06, 2500/3500 & ‘02-‘06, 1500) Built up to 03/17/06. GPD-4711678 $82.95 MOPAR Heater Core ‘03-‘09, 2500 & 3500 ‘08-‘10, 4500/5500 C&C ‘07-‘10, 3500 C&C ‘02-‘08, 1500 68004228AB $127.95 Heater Core ‘03-‘09, 2500 & 3500 ‘08-‘10, 4500/5500 C&C ‘07-‘10, 3500 C&C ‘02-‘08, 1500 GPD-8231401 $54.95 A/C Service Kit (‘07.5-‘09, 6.7L) Kit includes: Accumulator/Receiver • Expansion device/Orifice tube • Rear expansion device (if equipped) • O-ring rapid seal kit GPD-9423381 $113.95 A/C Service Kit (‘05-‘07, 5.9L) Kit includes: Accumulator/Receiver • Expansion device/Orifice tube • Rear expansion device (if equipped) • O-ring rapid seal kit GPD-9422493 $79.95 A/C Service Kit (‘03-‘04, 5.9L) Kit includes: Accumulator/Receiver • Expansion device/Orifice tube • Rear expansion device (if equipped) • O-ring rapid seal kit GPD-9422412 $69.95 MOPAR A/C & Heater Blower Motor Assembly (‘08-‘10,
‘03-‘09, 2500/3500, ‘02-‘08, 1500) 5096255AA $152.95 A/C & Heater Blower Motor (‘03-‘09) GPD-2311512 $64.95 MOPAR Blower Motor Resistor (‘03-‘09) 68004539AA $63.95 DORMAN Blower Motor Resistor Repair Pigtail (‘94-‘09) DRM645701 $18.95
Airbag Clock Spring (‘03, 1500/2500/3500 & ‘02, 1500) DRM525126 $137.95
Climate Control Module (‘03-‘05, 2500/3500 & ‘02-‘05, 1500) With manual air conditioning
rear window defogger
DRM599212 $215.95 MOPAR A-Pillar Mounting Hole Plug/Cover ‘03- ‘09 2500/3500 ‘02- ‘08 1500 ‘08- ‘10 4500/5500 WQ06BD1AA $20.95
3500/4500/5500 CC
DORMAN
DORMAN
controls. With
and heated mirrors.
LEFT OR RIGHT REAR
DORMAN Brake & Clutch Pedal Pad (‘03-‘18) For manual transmission trucks. DRM20780 $6.95
MOPAR Emergency Brake Foot Pad (‘03-‘23)
DORMAN Hood Release Cable with Handle (‘09-‘18)
2500/3500
1500 Direct replacement part. Black only.
DORMAN Parking Brake Release Handle (‘13-‘18) Direct replacement part. Black only.
DORMAN Parking Brake Handle (‘06-‘10)
3500/4500/5500 CC
2500/3500
1500
$9.95
Order 770-886-2500 or genosgarage.com 53 Product prices subject to change without notice. INTERIOR PARTS & ACCESSORIES 2003-2009 THIRD GENERATION DORMAN Window Lift Motor (‘03-‘09) Front DRIVER DRM742440: $55.95 PASSENGER DRM742441: $55.95 DORMAN Window Lift Motor (‘03-‘09) Rear - Quad Cab only. DRIVER DRM742442: $51.95 PASSENGER DRM742443: $51.95 MOPAR Rear Door HarnessMega Cab (‘06-‘09) 56051393AC $158.95 MOPAR Rear Door Harness - Quad Cab (‘08-‘10, 3500/4500/5500 CC ‘03-‘09, 2500/3500, ‘02-‘08, 1500) 56051694AA $192.95 MOPAR Headlight Switch without Fog Lights (‘03-‘05) 56045536AC $73.95 DORMAN Hood Release Cable (‘94-‘05) 1500/2500/3500 DRM912086 $52.95 MOPAR Brake Light Switch (‘01-‘09) 5083344AA $21.95 DORMAN Brake Pedal Pad (‘03-‘19) For automatic transmission trucks. DRM20785 $10.95 DORMAN Brake & Clutch Pedal Pad (‘03-‘18) For manual transmission trucks. DRM20780 $6.95 MOPAR Emergency Brake Foot Pad (‘03-‘20) 5102088AA $9.95 MOPAR Parking Brake Release Handle ‘03-‘05, 2500/3500 & ‘02-‘05, 1500 Slate Gray WL85XDV $34.50 Taupe WL85WL5AB $31.95 2010-2023 FOURTH GENERATION MOPAR Sun Visor - Plain -Driver’s Side ‘10-‘12, 2500/3500 1HQ27BD1AB $82.95 MOPAR Sun Visor with MirrorPassenger’s Side ‘10-‘12, 2500/3500 1HQ30BD1AB $111.95 MOPAR Sun Visor Clip Support ‘10-‘18, 2500/3500 1HS09BD1AA $5.95 DORMAN Map Light Lense (‘03-‘10) Fits left or right side map light. Fits: ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 ‘08-‘10, 4500/5500 DRM74970 $25.95 2010-2023 FOURTH GENERATION MOPAR A/C Evaporator ‘12-‘18, 2500/3500 ‘12-‘18, 1500 68138270AB $289.95 MOPAR A/C Evaporator ‘10-‘11, 2500/3500 ‘09-‘11, 1500 68048899AA $325.00 MOPAR Heater Core (‘10-‘18) 2500 & 3500 (‘09-‘18) 1500 68048895AA $180.95 MOPAR Blower Motor Resistor w/Auto Temperature Controls (‘13-‘18) For build date up to 7/29/13. 68048901AA $82.95 MOPAR Blower Motor Resistor w/Auto Temperature Controls (‘13-‘18) For build date after 7/29/13. 68018105AA $116.95 MOPAR Blower Motor Resistor (‘10-‘18) 68048900AA $41.95 DORMAN Puddle Lamps (‘10-‘18) 1500/2500/3500 Sold as a pair. DRM926108 $41.95 DORMAN Window Lift Motor (‘10-18) ‘10-‘18, 2500/3500/4500/5500 ‘09-‘18, 1500 DRIVER DRM742439 $49.95 PASSENGER DRM742438 $48.95 DORMAN Power Window Switch PASSENGER SIDE,
CREW
(‘03-‘09,
& ‘10,
DRM901437 $20.95
‘10-‘16,
‘11-‘16, 4500/5500 & 1500 DRM901477 $39.95
For
transmission trucks. DRM20785 $10.95
CAB
1500/2500/3500/4500/5500
4500/5500)
DORMAN Power Seat Switch, Front Left, 10-way
2500/3500
DORMAN Brake Pedal Pad (‘03-‘23)
automatic
5102088AA
‘10-‘18,
‘09-‘18,
DRM912200 $53.95
DRM74401 $22.95
‘08-‘10,
‘06-‘09,
‘06-‘08,
DRM74445
$30.95
FRONT AND REAR DOOR SEALS
‘89-‘09, 2500/3500 • ‘94-‘08, 1500 (Driver or Passenger Side)
Regular Cab • Standard Cab • Extended Cab • Mega Cab • Quad Cab
This seal presses on the pinchweld lip on the body and fits either the driver or passenger doors. Made to OEM specs. Kit does one door only. Order two kits to do both sides.
F R QUAD CAB
‘03-‘09, 2500/3500 • ‘08-‘10, 2500/3500 ‘02-‘08, 1500 DRIVER or PASSENGER SIDE
FRONT Mopar 55277294AA: $104.95 each
Precision DWB-3110-02: $32.95
REAR Mopar 55277293AA: $92.00
Precision DWB-3120-02: $29.95
REGULAR/STANDARD CAB - FRONT ‘03-‘09, 2500/3500 • ‘08-‘10, 2500/3500 ‘02-‘08, 1500 DRIVER or PASSENGER SIDE
Precision DWB-3110-02: $32.95
REGULAR/EXTENDED CAB - FRONT ‘94-‘02, 2500/3500 • ‘94-‘01, 1500 DRIVER or PASSENGER SIDE
Mopar 55276286AA: $51.95 each
Precision DWB-3110-94: $38.95
QUAD CAB - FRONT ‘94-‘02, 2500/3500 • ‘94-‘01, 1500 DRIVER SIDE ONLY
Mopar 55276503AA: $ 63.95
Precision DWL-3110-98: $47.95
PASSENGER SIDE
Precision DWR-3110-98: $47.95
DOOR LOWER SEAL
‘03-‘09, 2500/3500 • ‘02-‘08, 1500 ‘08-‘10, 4500/5500
FRONT
REGULAR CAB - FRONT ‘89-‘93, 2500/3500
DRIVER or PASSENGER SIDE
Mopar 55023781: $78.95 each
Precision DWB-3110-78: $25.95
GLASS RUN CHANNEL SEAL
Quad Cab • Mega Cab (Driver or Passenger Side)
‘03-‘09, 2500/3500 • ‘02-‘08, 1500
The glass run simply presses into the front, top & back section of the glass channel. A separate smaller run is installed inside the door in the back channel.
STANDARD CAB - FRONT ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500
PASSENGER SIDE 55277214AA: $76.95
QUAD CAB - FRONT ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500
DRIVER SIDE 55277217AA: $76.95
PASSENGER SIDE 55277216AA: $76.95
MEGA CAB - FRONT ‘06-‘09, 2500/3500 • ‘06-‘08, 1500
DRIVER SIDE 55277217AA: $76.95
PASSENGER SIDE 55277216AA: $76.95
REAR
REGULAR/QUAD/MEGA CAB DRIVER SIDE - FRONT
Mopar 55276181AH: $103.95
Precision GRL-3110-02: $52.95
QUAD CAB DRIVER SIDE - REAR
Mopar 55276165AH: $79.95
Precision GRL-3120-02: $32.95
REGULAR/QUAD/MEGA CAB PASSENGER SIDE - FRONT
Mopar 55276180AH: $101.95
Precision GRR-3110-02: $53.95
QUAD CAB PASSENGER SIDE - REAR
Mopar 55276164AH: $79.95
Precision GRR-3120-02: $32.95
MEGA CAB - REAR ‘06-‘09, 2500/3500 • ‘06-‘08, 1500
DRIVER SIDE/ PASSENGER SIDE 55277032AC: $23.95
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 54 Ram Turbo Diesel Parts & Accessories #121
WEATHERSTRIPPING
V
BODY SIDE UPPER WEATHERSTRIP
‘94-‘10, 2500/3500 • ‘94-‘08, 1500 (Driver & Passenger Side)
Regular Cab • Mega Cab • Quad Cab
This seal runs along the windshield and cab roof. Made to OEM specs.
REGULAR CAB
‘03-‘09, 2500/3500 • ‘08-‘10, 4500/5500 • ‘02-‘08, 1500
DRIVER SIDE 55277189AB: $33.95
REGULAR/EXTENDED CAB
‘94-‘02, 2500/3500 • ‘94-‘01, 1500
DRIVER SIDE 55275437AB: $71.95 each
QUAD CAB
‘03-‘09, 2500/3500 • ‘08-‘10, 4500/5500
‘02-‘08, 1500
DRIVER SIDE 55277191AB: $52.95
PASSENGER SIDE 55277190AB: $41.95
SIDE WINDOW BELTLINE SEAL
Quad Cab • Mega Cab (Driver & Passenger Side)
‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500
Replace a damaged side window beltline seal on your Dodge Ram truck with these MOPAR OEM seals.
OUTSIDE SEAL
QUAD CAB - FRONT ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500
DRIVER SIDE 55276203AH: $46.95
PASSENGER SIDE 55276202AH: $42.95
MEGA CAB - FRONT
‘06-‘09, 2500/3500 • ‘06-‘08, 1500
DRIVER SIDE 55276203AH: $46.95
PASSENGER SIDE 55276202AH: $42.95
INSIDE SEAL
MEGA CAB
‘06-‘09, 2500/3500 • ‘06-‘08, 1500
DRIVER SIDE 55277035AB: $49.95
BODY SIDE
SEAL RETAINER
‘93-‘09, 2500/3500 • ‘02-‘08, 1500 ‘08-‘10, 4500/5500
(Driver & Passenger Side)
Regular Cab • Mega Cab • Quad Cab
QUAD CAB - REAR
DRIVER SIDE 55276959AA: $ 56.95
PASSENGER SIDE 55276958AA: $59.95
MEGA CAB - REAR ‘06-‘09, 2500/3500 • ‘06-‘08, 1500
DRIVER SIDE 55277031AD: $41.95
PASSENGER SIDE 55277030AD: $41.95
QUAD/MEGA CAB - FRONT
‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500
DRIVER/PASSENGER SIDE
Mopar 55276896AF: $28.95
Precision WFB-3111-02: $29.95
REG CAB - FRONT
‘03-‘09, 2500/3500 • ‘02-‘08, 1500
DRIVER/PASSENGER SIDE
Precision WFB-3113-02: $34.95
QUAD CAB - REAR ‘03-‘09, 2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 3500/4500/5500 C&C
DRIVER/PASSENGER SIDE WFB-3121-04: $34.95
MEGA CAB - REAR ‘06-‘09, 2500/3500 • ‘06-‘08, 1500
DRIVER/PASSENGER SIDE 55277028AF: $49.95
NEW
‘08-‘10, 4500/5500 REG & QUAD CAB
‘03-‘09, 2500/3500 REG, QUAD & MEGA CAB
‘02-‘08, 1500 REG & QUAD CAB
DRIVER SIDE 55277187AD: $89.95
PASSENGER SIDE 55277186AD: $89.95
Order 770-886-2500 or genosgarage.com 55 Product prices subject to change without notice.
WEATHERSTRIPPING
‘03-‘09,
Built
2500/3500 • ‘02-‘08, 1500 • ‘08-‘10, 4500/5500
after 1/13/03.
2003-2009 THIRD GENERATION
Quad Cab and Mega Cab - Rear Doors Vertical Door Seal
‘03-‘09, 2500/3500 • ‘02-‘08, 1500
Sold individually.
Hood to Cowl Seal
‘03-‘09, 2500/3500 • ‘08-‘10, 4500/5500 • ‘02-‘08, 1500
1994-2002 SECOND GENERATION
Windshield Molding, ‘00-02
‘00-‘02, 2500/3500 • ‘00-‘01, 1500
Molding for windshields with 3 sides and welded corners.
Windshield Molding, ‘94-‘99
1500/2500/3500
Molding for windshields with 3 sides and welded corners.
Quad Cab
Driver or Passenger Vertical Rear Door Seal
This door weatherstrip attaches with the pre-applied clips to the vertical left rear side of the quad cab. Made to OEM specs.
Side Glass Run Channel ‘94-‘02
The glass run simply presses into the front, top & back section of the glass channel. A separate smaller run is installed inside the door in the back channel.
This two-piece kit fits one side.
Driver and Passenger Side Window Beltline Seal Kit ‘94-‘02
These beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. Made to OEM specs. Sold only as a kit.
Rear Window Seal without Trim Groove for Lockstrip
(Only fits ‘94-‘97, 1500/2500/3500)
This application goes first on the glass and is installed using the rope-in method. Made to OEM specs. Will not work with OEM sliding windows.
1989-1993 FIRST GENERATION
Windshield Weatherstrip Seal with Trim Groove for Lock Strip
This windshield seal goes first on the body then the glass is placed in the opening. A separate lockstrip (not included) inserts into the rubber and secures the glass in place. Made from ozone resistant EPDM rubber and to OEM specs.
Windshield Glass Seal Lockstrip
This chrome lockstrip inserts into the weatherstrip to lock in the glass. Made from ozone resistant EPDM rubber and to OEM specs. For use with windshield seal WCR-914. Includes center clip/clamp. Does one application.
Glass Run Channel Beltline Kit
‘89-‘93 Driver and Passenger Side V
These beltlines mount with the pre-applied clips on the left & right doors to sweep the inside & outside of the glass. Made from ozone resistant EPDM rubber and to OEM specs. Sold only as a kit.
Rear Window Seal without Trim Groove for Lockstrip
This rear window seal goes first on the glass and is installed using the rope-in method. It is a standard black gasket without trim groove. Made from ozone resistant EPDM rubber and to OEM specs. Will not work with OEM sliding windows.
Rear Window Seal with Trim Groove for Lockstrip
This rear window seal goes first on the body then the glass is placed in the opening. A separate lockstrip (not included) inserts into the rubber and secures the glass in place. Made from ozone resistant EPDM rubber and to OEM specs. Will not work with OEM sliding windows.
Glass Seal Lockstrip
This chrome lockstrip inserts into the weatherstrip to lock in the glass for the rear window. It’s sold as a single piece to do one application. Made from ozone resistant EPDM rubber and to OEM specs. For use with rear window seal WCR-1129.
Lockstrip Insert Tool
It is specifically designed for self-sealing two-piece rubber weatherstripping. The eye of the tool threads locking strip into the groove and inserts it into the channel.
For use with rear window seal WCR-1129.
Lockstrip Molding Center Joint Clamp
This center joint is made from myler chrome and covers the seam where the two ends meet. Made to OEM specs to fit for an authentic appearance.
1 required per vehicle.
CS-3110-02: $14.95
WFS-D1381: $19.95
WFS-D1176-98A: $14.95
DRIVER SIDE
DWL-3120-98: $56.95
PASSENGER SIDE
DWR-3120-98: $59.95
DRIVER SIDE
GRK-3110-94L: $46.95
PASSENGER SIDE
GRK-3110-94R: $45.95
WFK-3110-94: $56.95
WBL-DB8791: $49.95
WCR-914: $74.95
WLS-913/914-SP: $20.95
WFK-3111-80: $87.95
WBL-1129: $63.95
WCR-1129: $49.95
WLS-1129-C: $27.95
PRP-0002: $10.95
LJC-914-C: $1.95
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 56 Ram Turbo Diesel Parts & Accessories #121 WEATHERSTRIPPING
DRIVER or PASSENGER SIDE DWB-3121-02 $10.95
‘94-‘02
Flares
REAR DRW 3500 REGULAR/QUAD CAB without OEM Fender Flares
REAR SRW 2500
REAR DRW 3500
SG-DG-57061: $42.95
SG-DG-57071: $69.95
SG-DG-56001: $42.95
SG-DG-57051: $69.95
NOTE: These Husky Liner mud guards (Front and Rear) are custom-molded to fit the contour of the truck’s wheel well. They are pre-drilled and the holes line up with existing factory screw/trim hole locations. However, they do not extend as far below the bodywork as the Mopar splash guards.
MOPAR SPLASH GUARDS
FRONT 2500/3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)
‘19-‘23
‘19-‘23
FRONT 2500/3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)
FRONT 2500/3500 with OEM Fender Flares ( DELUXE MOLDED PLASTIC)
FRONT 2500/3500 without OEM Fender Flares ( DELUXE MOLDED PLASTIC)
FRONT 2500/3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)
FRONT 2500/3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)
‘10-‘18
FRONT 2500/3500 with OEM Fender Flares ( DELUXE MOLDED PLASTIC)
FRONT 2500/3500 without OEM Fender Flares ( DELUXE MOLDED PLASTIC)
REAR SRW 2500/3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)
‘19-‘23
‘19-‘23
REAR SRW 2500/3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)
REAR DRW 3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)
REAR DRW 3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)
REAR SRW 2500/3500 with OEM Fender Flares ( DELUXE MOLDED PLASTIC)
REAR SRW 2500/3500 without OEM Fender Flares ( DELUXE MOLDED PLASTIC)
REAR SRW 2500/3500 with OEM Fender Flares ( HEAVY-DUTY RUBBER)
REAR SRW 2500/3500 without OEM Fender Flares ( HEAVY-DUTY RUBBER)
‘10-‘18
PART#
SG-DG-82215928AB: $65.00/pair
SG-DG-82215930AB: $72.95/pair
SG-DG-82215923AB: $ 57.95/pair
SG-DG-82215924AB: $61.95/pair
SG-DG-82216222: $89.95/pair
SG-DG-82216221AA: $63.95/pair
SG-DG-82214137: $65.95/pair
SG-DG-82212287AC: $62.95/pair
SG-DG-82215929AB: $ 65.00/pair
SG-DG-82215931AB: $65.00/pair
SG-DG-82215933AB: $79.95/pair
SG-DG-82215932AB: $84.95/pair
SG-DG-82215926AB: $63.95/pair
SG-DG-82215925AB: $65.95/pair
SG-DG-82216223AA: $75.95/pair
SG-DG-82216219AA: $72.95/pair
REAR DRW 3500 with or without OEM Fender Flares ( HEAVY-DUTY RUBBER) SG-DG-82216220AA: $80.00/pair
REAR SRW 2500/3500 with OEM Fender Flares ( DELUXE MOLDED PLASTIC) SG-DG-82214136: $74.95/pair
REAR SRW 2500/3500 without OEM Fender Flares ( DELUXE MOLDED PLASTIC) SG-DG-82211228: $53.95/pair
‘03-‘09 REAR SRW 2500/3500 ( DELUXE MOLDED PLASTIC) CLOSEOUT! SG-DG-82207241: $69.95/pair
FRONT Heavy-Duty Rubber (‘10-‘18) 2500/3500
REAR Deluxe Molded Plastic (‘10-‘18) 2500/3500
Order 770-886-2500 or genosgarage.com 57 Product prices subject to change without notice. EXTERIOR PARTS & ACCESSORIES
‘19-‘23 FRONT 2500/3500 without OEM Fender Flares SG-DG-58041: $42.95 ‘19-‘22 FRONT 2500/3500 with OEM Fender Flares SG-DG-58051: $42.95 ‘10-‘18 FRONT 2500/3500 without OEM Fender Flares SG-DG-58171: $42.95 FRONT 2500/3500 with OEM Fender Flares SG-DG-58181: $42.95 ‘03-‘09 FRONT 2500/3500 SG-DG-56071: $42.95 ‘94-‘02 FRONT 2500/3500 SG-DG-56001: $42.95 ‘19-‘23 REAR SRW 2500/3500 without OEM Fender Flares SG-DG-59041: $42.95 ‘19-‘22 REAR SRW 2500/3500 with OEM Fender Flares SG-DG-59051: $42.95 ‘10-‘18 REAR SRW 2500/3500 without OEM Fender Flares SG-DG-57151: $42.95 REAR SRW 2500/3500 with OEM Fender Flares SG-DG-57161: $42.95 ‘10-‘18 REAR DRW 3500 without OEM Fender Flares SG-DG-57181: $69.95 REAR DRW 3500 with OEM Fender Flares SG-DG-57191: $80.95 ‘06-‘09 REAR DRW 3500 MEGA CAB without OEM Fender Flares SG-DG-57121: $69.95 ‘03-‘09 REAR SRW 2500/3500 without OEM Fender
HUSKY LINER MUD GUARDS PART#
FRONT & REAR Mud Guards
EZ Install
Ram 1500 model specific splash guards available online.
HEAVY-DUTY ‘SCRUBBLADE’ WINDSHIELD WIPERS
22” BLADE
‘10-‘23, 2500/3500
‘11-‘23, Chassis/Cab
‘09-‘23, 1500 Classic
SB2200: $19.95 Single / $36.00 Pair
24” BLADE
‘19-‘23, 1500
‘03-‘09, 2500/3500
‘03-‘10, Chassis/Cab
‘02-‘08, 1500
SB2400: $19.95 Single / $36.00 Pair
20” BLADE
‘94-‘02, 2500/3500
‘94-‘01, 1500
SB2000: $19.95 Single / $36.00 Pair
18” BLADE ‘89-‘93, 150/250/350
SB1800: $19.95 Single / $36.00 Pair
We’re always on the lookout for products that represent the best value for your money. At the 2017 SEMA Show we discovered the Scrubblade. We asked, “A rubber wiper blade is a rubber wiper blade, right?” As it turns out (a long story), rubber compounds greatly differ and you get what you pay for. With a closer look we noticed the Scrubblade’s dual blades, the patented scrub pattern and scrub “nibs.” These are three features that make these wiper blades worthy of your attention. Finally, the Scrubblade is competitively priced. So: premium rubber + great design + good price = best value.
TOUCH UP PAINT
Fix small scratches on your truck with Mopar touch up paint for exact match to OEM color.
Brilliant Black Crystal PXR 68627362AA: $16.95
Black Clear Coat PX8 68626413AA: $16.95
Bright White PW7 68626445AA: $16.95
Luxury Brown PTW 68623496AA: $16.95
Deep Cherry Red PRP 5163648AB: $16.95
True Blue PBU 5163947AB: $16.95
Deep Forest Green PGT 68623524AA: $16.95
Black Forest Green PGZ 68644710AA: $16.95
Granite Crystal Metallic PAU 68626496AA: $16.95
Pearl White PWQ 68623562AA: $16.95
Flame Red PR4 82400890AC: $16.95
Bright Silver Metallic PS2 4889427AC: $16.95
Bright Silver Metallic PSC 68626463AA: $16.95
Mineral Gray Metallic PDM 68623416AA: $16.95
Maximum Steel PAR 68154430AB: $16.95
Blue Streak PCL 68623552AA: $16.95
Patriot Blue PPX 6102967AA: $16.95
Diamond Black Crystal PXJ 68626415AA: $16.95
Paint sales code located on door sticker. Includes Abrasive Prep Tip, Paint Pen, Paint Brush, Top Coat and Applicator.
CABPL-CI-3580: $4.50 OEM emblem.
‘13-‘18, “Cummins C”
Chrome Emblem
68149701: $93.95
OEM emblem.
Ram 1500 EcoDiesel Emblem
‘14-‘18, 1500 & ‘19-‘20 Classic
68164914AA: $64.95
OEM replacement emblem.
55295314AC: $99.95
‘15-‘18, “Cummins C”
Black Emblem
68276962: $99.95 OEM emblem.
Cannot ship to Alaska or Hawaii. No Air or Expedited shipping.
CABPL-CI3571: $4.95 OEM emblem.
55295314AB:
“RAM 2500” 24V Emblem ‘98.5-‘02, 24V 55295313AC: $85.95
OEM emblem.
Grille emblem ‘10-‘12, 2500/3500
‘09-‘12, 1500
68050754AA: $95.95
OEM emblem.
Measures 110mm wide.
Grille emblem ‘03-‘05, 1500/2500/3500
5073290AB: $65.95
MOPAR OEM emblem.
Measures 61mm wide.
Grille emblem
‘10, 3500 Chassis Cab
‘03-‘09, 2500/3500
‘03-‘08, 4500/5500
68139834AA: $67.95
OEM emblem.
Measures 76mm wide.
Grille emblem ‘94-‘02, 2500/3500
‘94-‘01, 1500
55295240: $73.95
OEM emblem. No adhesive included.7
DOOR HANDLE REINFORCEMENT PLATES,
‘75-’93 ND-DR8993: $36.95
Fix a known weak spot on Dodge 150/250/350 trucks with this 16 gauge stainless steel reinforcement plate. With the interior door panel removed, it installs on the inside of the door and braces the door handle.
PUTCO Black Platinum Door Sill Guard Set
‘10-‘23, 2500/3500/4500/5500
‘09-‘18, 1500 Crew Cab Only PUTCO-95191BP: $62.99 Contains 4 pieces.
Protect your truck’s inner door sill from scuffs and scratches with these black stainless steel door sill guards. They are also great for covering up your already scuffed door sill. Sold in sets of 4. Quick and easy installation with 3M automotive tape.
58 Ram Turbo Diesel Parts & Accessories #121 Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info EXTERIOR PARTS & ACCESSORIES
“RAM 3500” 12V Emblem
$99.95
OEM emblem for ‘94-‘98 12-valve trucks.
“RAM 3500” 24V Emblem
OEM emblem for ‘98.5-‘02 24-valve trucks.
CUMMINS POWER Emblem
CUMMINS C Emblem
Replacement door handles available on page 60.
GASKETSWEATHERSTRIPPING & REPLACEMENT PARTS
GG-COWLCL94 $14.95
DORMAN Exterior Door Handle - Chrome (‘78-‘93)
Door handle gaskets included. Door handle reinforcements on page 58.
Hood Bumper Set with Stainless Steel Screws (‘72-‘93, 150/250/350)
DMTRK7293BB01-H $29.95
MOPAR Hood Bumper Pads (‘94-‘02, 2500/3500 & ‘94-‘01, 1500) 2276804 $3.95
Stainless Steel Hood Pop-Up Latch Spring (‘72-‘93, 150/250/350)
Diesel Radiator Splash Shield Seal (‘89-‘91, 250/350 Non-intercoooled) Clips included.
Diesel Radiator Splash Shield Seal (‘91.5-‘93, 250/350 Intercoooled) Clips included.
Engine Well Frame Rail Splash Shields (‘92-’93) Sold as a pair. 32 OEM-style clips included.
Engine Well Frame Rail Splash Shields (‘90-’91) Sold as a pair. 32 OEM-style clips included.
Engine Well Frame Rail Splash Shields (‘81-’89) Sold as a pair. 31 OEM-style clips included.
Splash Shield Large Head Stainless Steel Clip (‘61-‘93, 150/250/350)
Non-A/C Heater Blower Motor Gasket (‘72-‘93, 150/250/350 & ‘66-’70, 150/250/350)
Firewall MEGA Gasket Set (‘81-‘93, 150/250/350) Includes additional speedometer and OEM parking/ emergency brake cable grommet.
Firewall Standard Gasket Set (‘81-‘93, 150/250/350)
Steering Column Gasket (‘78-‘93, 150/250/350)
Fuel Filler to Body Gasket (‘81-‘93, 150/250/350)
Parking/Emergency Brake Cable-to-Firewall Grommet (‘60-‘93, 150/250/350) Includes screws for installation.
DORMAN Spare Tire Hoist Assembly (‘03-‘12, 2500/3500 & ‘02-‘05, 1500)
DORMAN Spare Tire Hoist Assembly (‘94-‘02, 2500/3500 & ‘94-‘01, 1500)
Oval Door Hinge Bolt Access Plug (‘72-‘93, 150/250/350)
DORMAN Hinge Pin & Bushing Kit (‘89-‘93) Kit includes 4 pins and 8 bushings.
MOPAR Hinge, Upper Left, Front Door ‘94-‘02, 2500/3500 & ‘94-‘01, 1500 Reg, Ext & Quad Cab
MOPAR Hinge, Upper Right, Front Door ‘94-‘02, 2500/3500 & ‘94-‘01, 1500
Ext & Quad Cab
MOPAR Hinge, Lower Left & Right, Front Door
2500/3500 & ‘94-‘01, 1500
Ext & Quad Cab
DMCHR2935375-T $8.95
DMTRK8991SS30 $14.95
DMTRK9193SS30 $14.95
DMTRK8993SS20-D $58.95
DMTRK9091SS20-D $58.95
DMTRK8189SS20-D $58.95
DMCHR6029886 $.50
DMCHR2485429 $7.95
DMTRK8193FW01M $52.95
DMTRK8193FW01 $21.95
DMTRK7893SC01 $4.00
DMCHR4185304 $2.95
DMCHR2259118 $27.95
DRM924541
DMCHR3494811
Door Handle and Lock Gaskets
Driver & Passenger Side (‘72-‘93, 150/250/350)
DORMAN Door Striker (‘89-‘93)
DMAXX6776DH02
Made from durable steel. Thread size: 7/16” - 14. DRM38442
Cab Cargo Light Lamp Gasket (‘72-‘93, 150/250/350)
Die cut, EPDM gray foam rubber gasket. Fits two bulb lights only.
Third Brake Light Gasket with Adhesive Backing (‘94-‘02, 2500/3500 & ‘94-‘01, 1500)
Thicker foam and adhesive backing helps stop water leaking into cab.
Third Brake Light Gasket with Adhesive Backing (‘03-‘09, 2500/3500 & ‘02-‘08, 1500)
Thicker foam and adhesive backing helps stop water leaking into cab.
Third Brake Light Gasket with Adhesive Backing (‘10-‘18, 2500/3500 & ‘09-‘18, 1500)
Thicker foam and adhesive backing helps stop water leaking into cab.
*Will not work with third brake lights with camera.
DMTRK7280BL01
DORMAN Tailgate Hinge Bushing Kit (‘95-‘01, 1500 & ‘95-‘02, 2500/3500)
DORMAN Tailgate Hinge Kit (‘03-‘09, 2500/3500 & ‘02-‘08, 1500) Bushings sold separately.
DORMAN Tailgate Support Cables (‘03-‘23, 2500/3500 & ‘02-‘18, 1500 & ‘19-‘23, 1500 Classic) Sold as a pair.
DORMAN Tailgate Support Cable (‘94-‘0 2, 2500/3500 & ‘94-‘01, 1500) Left or Right Sold individually.
DORMAN Tailgate Hardware Rebuild Kit (‘03-‘09, 2500/3500 & ‘02-‘07, 1500)
Includes: 1 handle, 1 latch bracket, 2 latches, 2 cables, 2 latch rods, 2 latch bolts, 10 M6 body screw, 2 M5 flange lock nuts
MOPAR Fifth Wheel/Gooseneck Pickup Bed Plug Cover Kit (‘13-‘23) 2500/3500 Contains 4 mounting hole covers and 1 gooseneck hole cover.
DMRAM0918BL02-CAM
GG-TGBKIT $22.95
DRM38641 $10.95
DRM38650 $20.95
DRM38542 $21.95
DRM38535 $12.95 each
DRM38911 $188.95
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 60 Ram Turbo Diesel Parts & Accessories #121
$30.95 PASSENGER’S
$30.95
DRIVER’S SIDE DRM93502
SIDE DRM93504
$7.95
$10.95
$6.95
DMRAM9401BL01 $9.95
DMRAM0208BL01 $9.95
DMRAM0918BL01 $9.95
‘10-‘18
camera ‘09-‘18 1500
camera $9.95
Tailgate Handle (‘03-‘09, 2500/3500 & ‘02-‘08, 1500) Constructed of reinforced plastic for long-lasting endurance. DRM80165 $32.95 DORMAN Tailgate Handle Bezel (‘94-‘0 2, 2500/3500 & ‘94-‘01, 1500) Bezel only. DRM83200 $6.95 DORMAN Replacement Tailgate Handle (‘94-‘0 2, 2500/3500 & ‘94-‘01, 1500) DRM79601 $28.95 Tailgate Push Type
Kit (‘10-‘23, 2500/3500
‘09-‘22,
Classic) Includes 6 push type retainers. GG-TGATECL $7.95 DORMAN Tailgate Hinge Bushing - Right Side (‘09-‘18, 1500 & ‘10-‘18, 2500/3500) DRM38713 $11.95 MOPAR Tailgate Hinge Bushing Kit (‘03-‘09, 2500/3500 & ‘02-‘08, 1500)
Third Brake Light Gasket
2500/3500 with
with
DORMAN
Retainer
&
1500
‘13-‘15 68225506AA: $55.95 ‘16-‘23 68293200AB: $ 44.95
DRM924538 $153.95
$115.95
$9.95
DRM703272 $8.95
55075957AC $88.95
55075956AC $66.95
Reg,
55275464AC $60.95
‘94-‘02,
Reg,
EXTERIOR
Putco’s Blade LED Tailgate Light Bar Kits
Brighten up your Ram’s rear lighting configuration and add extra safety with the addition of a Blade LED Tailgate Light Bar Kit. The light bar spans nearly the width of the tailgate and is mounted just under it, directly above the rear bumper. It works in tandem with your OE rear lights including running lights, braking lights, reversing lights and turn signals. Their multi-patented design allows for a quick and painless installation – with no cutting or splicing of your factory harness required using their proprietary Quick Connect Harness. Best of all, you add up to 2000 lumens to the rear lighting in a streamlined design with the 60” light bar.
2 piece 18” Light Bar with vehicle-specific harness
‘19-‘23 1500 DT Series
PUT-9200918-04: $290.99
60” LED Light Bar with vehicle-specific harness
‘09-‘18 1500
‘10-‘18 2500/3500
‘19-‘23 2500/3500
PUT-9201960-04: $316.99
* Oversize shipping may apply.
Order 770-886-2500 or genosgarage.com 61 Product prices subject to change without notice. HEADLIGHTS, TAIL LIGHTS & FOG LIGHTS, WHEEL RELATED
RUNNING BRAKING TURN REVERSE
60”
Matte Black w/ Ram Logo ‘19-‘23 2500/3500 SRW With 20” x 8.0 Aluminum Wheels Front or Rear 6PG01RXFAA $9.95 Chrome w/ Ram Logo ‘19-‘23 2500/3500 SRW With 18” x 8.0 & 20” x 8.0 Aluminum Wheels Front or Rear 6PG01SZ0AA $17.95 Chrome w/ Ram Logo ‘19-‘23 3500 DRW With 17” x 6.0 Aluminum Wheels Front Only 6QC38SZ0AB $44.95 Chrome w/ Ram Logo ‘19-‘23 2500/3500 SRW With 18” x 8.0 Steel Wheels Front or Rear 6PG02SZ0AC $41.95 Argent/Silver w/ Ram Logo ‘19-‘23 2500/3500 SRW With 18” x 8.0 Steel Wheels Front or Rear 6PG02S4AAC $32.00 Chrome w/ Ram Logo ‘19-‘23 3500 DRW With 17” x 6.0 Steel Wheels Front Only 6MP52SZ0AB $54.95 Chrome w/ Ram Logo ‘13-‘18 2500/3500 SRW With 18” x 8.0 Steel Wheels Front or Rear 4726279AA $70.25 Chrome w/ Laramie Logo ‘13-‘18 2500/3500 SRW With 18” x 8.0 & 20” x 8.0 Aluminum Wheels Front or Rear 4726368AA $43.95 Matte Black w/ Ram Logo ‘14-‘18 2500/3500 SRW With 18” x 8.0 Aluminum Wheels Front or Rear 5RK12RXFAA $46.95 Chrome w/ Ram Logo ‘13-‘18 2500/3500 SRW With 18” x 8.0 & 20” x 8.0 Aluminum Wheels Front or Rear 4726280AA $65.95 Chrome w/ Ram Logo ‘11-‘18 3500 DRW With 17” x 6.0 Aluminum Wheels Rear Only 68081015AC $124.95 Chrome w/ Ram Logo ‘11-‘18 3500 DRW With 17” x 6.0 Aluminum Wheels Front Only 68081010AB $138.95 Chrome w/ Ram Logo ‘03-‘18 3500 DRW With 17” x 6.0 Steel Wheels Rear Only 52106877AD $167.95 Chrome w/ Ram Logo ‘03-‘18 3500 DRW With 17” x 6.0 Steel Wheels Front Only 52106876AD $47.95 Chrome w/ Ram Logo ‘03-‘13 2500/3500 SRW With 17” x 8.0 Steel Wheels Front or Rear 52121450AD $130.95 MOPAR DUAL REAR WHEEL SIMULATORS
2 piece 18” shown above.
shown below.
Chrome/Front ‘19-‘23 3500 DRW With 17” x 6.0 Steel Wheels 6MP54SZ0AB $115.95 Chrome/Front ‘03-‘18 3500 DRW With 17” x 6.0 Steel Wheels 52106937AC $211.95
MOPAR WHEEL CENTER CAPS
Towing Mirror Glass, ‘10-‘21
Towing Mirror Signal Lights ‘10-‘22, 2500/3500 & ‘19-‘22 1500 Classic
The turn signal in the outside mirror has been revised. Please make sure it is visually matches the opposite mirror. if not, both sides will need to be replaced.
Aftermarket Mirror Glass Assemblies
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 62 Ram Turbo Diesel Parts & Accessories #121 REPLACEMENT MIRRORS
‘08-‘10 4500/5500 ‘03-‘09 2500/3500 ‘02-‘08 1500 Sport Style Manual Non-Towing DRIVER 55077439AJ: $160.00 PASSENGER 55077438AJ: $165.00 Sport Style Electric • Heated Towing DRIVER 55077925AD: $180.00 PASSENGER 55077924AD:$170.00 Manual Towing DRIVER 55077493AN: $299.00 PASSENGER 55077492AN: $309.00 Electric • Heated Towing DRIVER 55077445AO: $499.00 PASSENGER 55077444AO: $499.00 Manual Towing DRIVER KVDG44L: $168.95 PASSENGER KVDG44R: $168.95 Electric • Heated Towing DRIVER KVDG44EL: $202.95 PASSENGER KVDG44ER: $202.95 ‘03-‘09 2500/3500 ‘02-‘08 1500 Sport Style Manual Non-Towing DRIVER KVDG42L: $112.95 PASSENGER KVDG42R: $112.95 Sport Style Electric • Heated Non-Towing DRIVER KVDG42EL: $112.95 PASSENGER KVDG42ER: $112.95 ‘98-‘02 2500/3500 ‘98-‘01 1500 Sport Style Manual Non-Towing DRIVER KVDG33L: $98.95 PASSENGER KVDG33R: $98.95 Sport Style Electric • Heated Non-Towing DRIVER KVDG33EL: $105.95 PASSENGER KVDG33ER: $105.95 Electric • Heated Towing Mirror support brackets included. DRIVER KVDG49EL: $190.00 PASSENGER KVDG49ER: $190.00 ‘94-‘02 2500/3500 ‘94-‘01 1500 Manual Towing Mirror support brackets included. DRIVER KVDG49L: $148.95 PASSENGER KVDG49R: $148.95 ‘94-‘97 2500/3500 1500 Electric Towing Mirror support brackets included. DRIVER KVDG66EL: $209.95 PASSENGER KVDG66ER: $209.95 Manual • Chrome Non-Towing DRIVER KVDG13L: $89.95 PASSENGER KVDG13R: $89.95 Electric • Chrome Non-Towing DRIVER KVDG30EL: $102.95 PASSENGER KVDG30ER: $102.95 ‘89-‘93 350/250/150 Manual • Chrome Non-Towing DRIVER KVDG68L: $169.95 PASSENGER KVDG68R: $169.95 Electric • Chrome Non-Towing DRIVER KVDG69EL: $169.95 PASSENGER KVDG69ER: $169.95 APPLICATION PART# ‘07-‘09, SPORT • Manual DRIVER DRM56271 $28.95 PASSENGER DRM56270 $23.95 ‘05-‘09, SPORT • Heated DRIVER DRM56324 $37.95 PASSENGER DRM56323 $32.95 ‘05-‘09, TOWING • Heate d NOTE: Attaches with 3 metal prongs. DRIVER DRM56276 $75.95 PASSENGER DRM56277 $45.95 ‘05-‘09, TOWING • Manual NOTE: Attaches with 3 metal prongs. DRIVER DRM56242 $26.95 PASSENGER DRM56243 $55.95 ‘03-‘06, SPORT • Non-Heated DRIVER DRM56240 $23.95 PASSENGER DRM56241 $31.95 ‘03-‘05, TOWING • Heated NOTE: Attaches with round spring band. DRIVER DRM56272 $79.95 PASSENGER DRM56273 $82.95 ‘03-‘04, SPORT • Heated DRIVER DRM56274 $35.95 PASSENGER DRM56275 $34.95 ‘98-‘02, SPORT • Heate d DRIVER DRM56216 $26.95 PASSENGER DRM56217 $28.95 ‘98-‘02, SPORT • Non-Heated DRIVER DRM56256 $24.95 PASSENGER DRM56257 $32.95
STOCK REPLACEMENT SIDE VIEW MIRRORS
‘10-‘21 CONVEX GLASS DRIVER 68067731AA $48.95 PASSENGER 68067730AA $48.95 ‘10-‘15 BLACK or CHROME • Power • Heated DRIVER 68067727AA $28.95 PASSENGER 68067726AA $28.95 ‘10-‘21 BLACK or CHROME • Manual • non-Heated DRIVER 68067729AA $39.95 PASSENGER 68067728AA $39.95 Check mounting on back of mirror glass before ordering. Call or compare online. ‘15-‘18,
‘19-‘20,
Classic BLACK or CHROME • Power • Heated DRIVER 68286843AA $33.95 PASSENGER 68286844AA $33.95 Check mounting on back of mirror glass before ordering. Call or compare online. DRIVER 68302829AA: $102.95 PASSENGER 68302828AA: $102.95
*Check the back of the mirror for mount type before ordering. Glass fits OEM mirrors only.*
2500/3500
1500
REPLACEMENT HEADLIGHTS
‘13-‘18,
Halogen Projector w/Black Bezel
not work on non-Sport trucks without the purchase of Brite Box ‘Sport’ headlight conversion for either ‘94-‘98 or ‘99-‘02 trucks.
REPLACEMENT FOG LIGHTS
‘13-‘18, 1500
‘19, 1500 Classic
DRIVER 68104821AF: $99.00
PASSENGER 68104820AF: $ 99.00
DRIVER DEP-3342020L: $39.95
PASSENGER DEP-3342020R: $39.95
DRIVER 55372735AB: $82.95
‘10-‘18, 2500/3500/ 4500/5500
‘09-‘12, 1500
PASSENGER 55372734AB: $81.95
DRIVER DEP-3342015L: $33.95
PASSENGER DEP-3342015R: $33.95
‘03-‘09, 2500/3500
‘02-‘08, 1500
DRIVER 55077475AE: $164.00
PASSENGER 55077474AE: $164.00
DRIVER DEP-3342009L: $44.00 RIGHT DEP-3342009R: $44.00
DRIVER, ‘99-‘02 55076941AB: $78.95
‘99-‘02, 2500/3500
‘99-‘01, 1500 w/o Sport Package
DRIVER DEP-3342011L: $35.00
PASSENGER DEP-3342011R: $35.00
‘98-‘02, 2500/3500
‘98-‘01, 1500 with Sport Package
DRIVER or PASSENGER 55076942AB: $95.95
‘99-‘02, 2500/3500 with Sport Package
DRIVER or PASSENGER DEP-3342010: $46.00
Order 770-886-2500 or genosgarage.com 63 Product prices subject to change without notice.
1500/2500/3500
and Chrome
Ring
Projector
DRIVER DEP-3341137LAS2 $275.00 PASSENGER DEP-3341137RAS2 $275.00
1500/2500/3500 For trucks built after 7/23/12. ‘11-‘18, 4500/5500 Quad Headlights DRIVER 68096439AJ $299.00 PASSENGER 68096438AJ $299.00 ‘10-‘12, 2500/3500 ‘11-‘12 4500/5500 ‘09-‘12, 1500 Single Headlight DRIVER 55277409AG $256.95 PASSENGER 55277410AG $256.95 ‘10-‘12, 2500/3500 ‘11-‘12 4500/5500 ‘09-‘12, 1500 For trucks built up to 7/23/12. Quad Headlights DRIVER 68001485AI $254.00 PASSENGER 68001484AI $254.00 ‘07-‘09, 2500/3500 ‘08-‘10 4500/5500 ‘07-‘08, 1500 DRIVER DEP-3341122L $99.00 PASSENGER DEP-3341122R $99.00 DRIVER 68003125AD $280.00 PASSENGER 68003124AD $280.00 ‘06, 1500/2500/3500 DRIVER DEP-3341115L $105.00 PASSENGER DEP-3341115R $105.00 DRIVER 55077795AD $279.95 PASSENGER 55077794AD $279.95 ‘03-‘05, 2500/3500 ‘02-‘05, 1500 DRIVER DEP-3341108L $115.00 PASSENGER DEP-3341108R $115.00
w/Sport
*
DRIVER DEP-3341102L $119.00 PASSENGER DEP-3341102R $119.00
DRIVER DEP-3331104L $85.00 PASSENGER DEP-3331104R $85.00
DRIVER
PASSENGER DEP-PH105 $35.95 HEADLIGHTS,
Will only work with factory installed projectors.
‘13-‘18,
‘99-‘02, 2500/3500 ‘99-‘01, 1500
Package
Will
‘94-‘02, 2500/3500
‘94-‘01,
1500 Single bulb
‘89-‘93,
150/250/350
or
TAIL LIGHTS & FOG LIGHTS
‘13-‘18, 2500/3500
LED lights with Black housing.
DRIVER 68093081AC: $310.00
PASSENGER 68093080AC: $310.00
‘94-‘02, 2500/3500
‘94-‘01, 1500 with Textured Black Frame Non-Sport trucks.
‘13-‘18, 2500/3500
LED lights with Chrome housing.
DRIVER 68093079AC: $310.00
PASSENGER 68093078AC: $310.00
‘99-‘02, 2500/3500
DRIVER 55055265AC: $79.95
PASSENGER 55055264AC: $79.95
DRIVER DEP-3331909L-TXTBL: $32.95
PASSENGER DEP-3331909R-TXTBL: $32.95
‘10-‘18, 2500/3500
‘09-‘18, 1500
‘19, 1500 Classic Non-LED lights.
DRIVER 55277415AE: $114.95
PASSENGER 55277414AF: $119.95
‘99-‘01, 1500 with Smooth Black Frame Sport trucks.
DRIVER DEP-3331909L: $49.95
PASSENGER DEP-3331909R: $49.95
‘07-‘09, 2500/3500
‘07-‘08, 1500 Non-LED lights.
DRIVER 55277303AC $72.95
PASSENGER 55277302AC: $72.95
DRIVER DEP-3341916L: $44.00
PASSENGER
DEP-3341916R: $44.00
‘89-‘93, 150/250/350 with Black Frame
DRIVER DEP-3331902L: $42.00
PASSENGER DEP-3331902R: $42.00
‘03-‘06, 2500/3500
‘02-‘06, 1500
Tail light circuit strips sold separately.
DRIVER 55077347AF $124.95
PASSENGER 55077348AF: $124.95
‘89-‘93, 150/250/350 with Chrome Frame
DRIVER DEP-3331923L: $35.00
PASSENGER DEP-3331923R: $35.00
DRIVER DEP-3341906L: $41.00
PASSENGER
DEP-3341906R: $41.00
Tail Light Circuit Strip (‘03-‘06, 2500/3500 & ‘02-‘05 1500)
If the tail lights in your truck stop working, it may not be the bulbs. Over time the contacts can get weak and they will not make good contact with the bulbs. Fix the problem with this replacement tail light strip. Sold individually.
LEFT OR RIGHT SIDE DRM923030: $16.95
REPLACEMENT CAB LIGHT KIT
Cab Light Kit, Grey ‘74-‘93 Ram, 150/250/350
Includes - 5 Lenses, 5 Base Housings, 5 Base Plate Gaskets, 5 Light Sockets, 5 Bulbs, & 10 Mounting Screws.
Main harness and drill template not included. Coming soon.
1G-CLK-G: $299.00
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 64 Ram Turbo Diesel Parts & Accessories #121 HEADLIGHTS, TAIL LIGHTS & FOG LIGHTS
TAIL LIGHTS
REPLACEMENT
PLASTIC LENSE NUT, ‘03-‘09
Cab light lense 55077559AD for ‘03-‘09 trucks is the new updated style lamp with updated lense and gasket. You will need two of these plastic nuts per lense when replacing an older style lense with a foam gasket. Some trucks built after May 2006 may already have the updated lenses and plastic nuts.
Order 770-886-2500 or genosgarage.com 65 Product prices subject to change without notice. HEADLIGHTS, TAIL LIGHTS & FOG LIGHTS REPLACEMENT TAILGATE LAMPS ‘06-‘16, 3500 DRW Complete lamp assembly. Includes bulbs. 55277299AB: $47.95 ‘06-‘16, 3500 DRW Complete lamp assembly. Includes bulbs. DRM923025: $44.95 ‘03-‘06, 3500 DRW With 8 ft. bed. Lense only. 05086509AA: $112.95 ‘94-‘02, 2500/3500 Tailgate Lampbar Frame only. 55054823: $44.95 REPLACEMENT CARGO LIGHT LENSE ‘72-‘93, 150/250/350 For two bulb light only. Gasket on page 60. GG-3489707: $55.95 REPLACEMENT LICENSE PLATE LIGHTS ‘11-‘18, 2500/3500 License Plate Light Assembly Does not include light bulb. DRIVER DRM68143: $40.95 PASSENGER DRM68142: $19.95 ‘11-‘18, 2500/3500 License Plate Light Assembly Includes light bulb and mounting clip. RIGHT 55078094AE: $59.95 LEFT 55078095AE: $59.95 ‘11-‘15, 2500/3500 License Plate Lense DRM68164: $11.95 License Plate Lamp Socket and Harness Assembly (‘94-‘02) 5179988AC: $21.95 License Plate Lamp Socket and Harness Assembly (‘94-‘02) DRM645748: $13.95 MOPAR OEM REPLACEMENT CAB LIGHT LENSES ‘19-‘23, 2500/3500 68362179AE: $58.95 ‘10-‘18 68261677: $29.95 ‘03-‘09 Replacement plastic lense nuts included with purchase. 55077559: $19.95
J4000141: $1.00 each ‘89-‘93 3738011: $14.95
Clearance
Includes 5 gaskets for installation. DMTRK8493CL01: $15.00 REPLACEMENT SIDE MARKERS & TURN SIGNALS 10-‘18, 3500 DRW Fender Clearance Lamp Bulb included. RED 68042140AA: $42.95 AMBER 68042143AA: $40.95 ‘03-‘09, 3500 DRW Red Fender Clearance Lamp Bulb not included. DRIVER or PASSENGER DRM68204: $34.95 ‘03-‘09, 3500 DRW Fender Clearance Lamp Bulb included. RED 55077458AA: $42.95 AMBER 55077459AA: $42.95 RED DEP-3341412-R: $34.95 AMBER DEP-3341412-Y: $34.95 ‘91-‘93 150/250/350 Turn Signal/Parking Light Assembly DRIVER DEP-3331605L: $19.00 PASSENGER DEP-3331605R: $19.00 ‘89-‘93 150/250/350 Side Marker Assembly DRIVER or PASSENGER DEP-3341401N: $7.00 REPLACEMENT THIRD BRAKE LIGHT ‘03-‘09, 2500/3500 ‘02-‘08, 1500 Third Brake Light 05072594AD: $133.95
Cab
Light Gasket Set (‘84-‘93)
GASKETS & SEALS
Upper engine gasket kits include a standard thickness head gasket.
Please check our website for all gasket kit contents.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 66 Ram Turbo Diesel Parts & Accessories #121
CUMMINS Upper Engine Gasket Kit (‘13-‘18, 6.7L) 4376090: $509.95 CUMMINS Upper Engine Gasket Kit (‘11-‘12, 6.7L) 4955523: $599.00 CUMMINS Upper Engine Gasket Kit (‘07.5-‘10, 6.7L) 4955354: $645.00 CUMMINS Upper Engine Gasket Kit (‘03-‘07, 5.9L) 4089819: $519.95 CUMMINS Upper Engine Gasket Kit (‘98.5-‘02, 5.9L 24V) 4090035: $331.95 CUMMINS Upper Engine Gasket Kit (‘89-‘98, 5.9L 12V) 4089649: $498.00 CUMMINS Lower Engine Gasket Kit (‘13-‘18, 6.7L) 4376091: $233.95 CUMMINS Lower Engine Gasket Kit (‘11-‘12, 6.7L) 4955522: $288.95 CUMMINS Lower Engine Gasket Kit (‘07.5-‘10, 6.7L) 4955355: $178.95 CUMMINS Lower Engine Gasket Kit (‘03-‘07, 5.9L) 4089173: $320.95 CUMMINS Lower Engine Gasket Kit (‘98.5-‘02, 5.9L 24V) 3800487-01: $415.00 CUMMINS Lower Engine Gasket Kit (‘89-‘98, 5.9L,12V) 3802376-01: $449.95 CUMMINS Rear Main Seal Cover Gasket (‘03-‘23) 3957492: $10.95 CUMMINS Rear Main Seal Cover Gasket (‘89-‘02) 4947667: $11.95 CUMMINS Rear Main Seal with Repair Sleeve (‘89-‘18, 5.9L & 6.7L) 3926126: $148.95 MAHLE Rear Crank Seal Kit (‘03-‘23, 5.9L & 6.7L) Rear main cover seal, main seal and guide, bellhousing to camshaft adapter seal, install tool, RTV. JV1690: $25.95 MAHLE Rear Crank Seal Kit (‘89-‘02, 5.9L) Rear main cover seal, main seal and guide, installation tool. JV1622: $38.95 CUMMINS Rear Crank Seal (‘89-‘23, 5.9L & 6.7L) Above rear main seal gasket required when replacing rear crank seal. 5405392: $37.95 CUMMINS Front Cover Crank Seal (‘07.5-‘22, 6.7L) 4931561: $18.95 MAHLE Front Cover Crank Seal with Repair Sleeve & Depth Gauge (‘89-‘18, 5.9L & 6.7L) 48383: $28.95 CUMMINS Front Cover Crank Seal with Repair Sleeve (‘89-‘18, 5.9L & 6.7L) 3802820: $146.95 FELPRO Front Cover Crank Seal Repair Sleeve (‘89-‘13, 5.9L & 6.7L) Works with stock crank seal #3937111. GG-16219: $9.95 CUMMINS Front Cover Crank Seal (‘89-‘07, 5.9L) 3937111: $53.95 CUMMINS Crankcase Breather Gasket (‘07.5-‘23, 6.7L) 3999820: $14.95 CUMMINS Replacement Oil Cap O-ring (‘98.5-‘23) 3973512: $4.95 CUMMINS Valve Cover Gasket (‘06-‘23, 5.9L & 6.7 L) 5367847: $178.95 MAHLE Valve Cover Gasket (‘06-‘23, 5.9L & 6.7 L) VS50543: $178.95 Geno’s Valve Cover Gasket (‘03-‘05, 5.9L) GG-3954324: $34.95 CUMMINS Valve Cover Gasket (‘03-‘05, 5.9L) 3954324: $60.95 Geno’s Valve Cover Gasket (‘98.5-‘02, 5.9L) GG-3935878: $48.95 CUMMINS Valve Cover Gasket (‘98.5-‘02, 5.9L 24V) NEW! 3935878: $94.95 Geno’s Valve Cover Gasket (‘89-‘98, 5.9L 12V) Requires 6 gaskets for installation. GG-3930906: $4.95 CUMMINS Valve Cover Gasket (‘89-‘98, 5.9L 12V) Requires 6 gaskets for installation. 3930906: $9.95 CUMMINS Valve Cover Bolt Rubber Seal Isolator & Washer (‘06-‘23, 5.9L & 6.7L) Requires 6 seals for installation. 3973853: $11.95 MAHLE Valve Cover Bolt Seal/Isolator Set (‘06-‘23, 5.9L & 6.7L) Includes 6 seals for installation. GS33798: $19.95 CUMMINS Valve Cover Bolt Rubber Seal Isolator, Bolt & Washer (‘04.5-‘05, 5.9L 24V) Requires 6 seals for installation. 3957203: $49.95 MAHLE Valve Cover Bolt Seal/Isolator Set (‘04.5-‘05, 5.9L 24V) Includes 6 seals for installation. GS33799: $17.95 CUMMINS Valve Cover Bolt Rubber Seal Isolator & Washer (‘98.5-‘02, 5.9L 24V) Requires 5 seals for installation. 3942659: $7.95 MAHLE Valve Cover Bolt Seal/Isolator Set (‘98.5-‘02, 5.9L 24V) Includes 5 seals for installation. GS33952: $16.95 CUMMINS Valve Cover O-ring (‘03-‘04, 5.9L 24V ) For valve cover bolts. Requires (6) O-rings for installation. 3087740: $2.50 CUMMINS Valve Cover O-ring (‘89-‘98, 5.9L 12V ) For valve cover bolts. Requires (6) O-rings for installation. 3910824: $2.95 CUMMINS Valve Cover Breather O-ring (‘03-‘05, 5.9L 24V ) 3073966: $12.95 CUMMINS Valve Cover Rubber Seal (‘89-‘98, 5.9L 12V ) For valve cover bolts and replaces original O-rings. Requires (6) seals for installation. 3935449: $4.25 MSI Lower Valve Cover Rocker Assembly Gasket (‘03-‘23, 5.9L & 6.7L ) MSI6508: $9.95 CUMMINS Lower Valve Cover Rocker Assembly Gasket (‘03-‘23, 5.9L & 6.7L ) 3963379: $29.95 CUMMINS Pushrod Side Cover Gasket (‘89-‘02, 5.9L) 3284623: $29.95 CUMMINS Engine Gear Cover Gasket (‘94-‘02, 5.9L ) 3918673: $59.95 CUMMINS Engine Gear Cover Gasket (‘89-‘93, 5.9L ) 3914385: $47.50 CUMMINS Engine Front Cover Gear Housing to Block Gasket (‘03-‘23, 5.9L & 6.7L) 5341995: $23.95 CUMMINS Engine Front Cover Gear Housing to Block Gasket (‘89-‘02, 5.9L) 3938156: $32.95
GASKETS
GASKETS & SEALS
Order 770-886-2500 or genosgarage.com 67 Product prices subject to change without notice. GASKETS
CUMMINS Intake Plenum Gasket (‘03-‘22, 5.9L & 6.7L ) 3947530: $20.95 CUMMINS Intake Plenum Gasket (‘89-‘02, 5.9L ) 3938152: $22.95 CUMMINS Throttle Valve Body to Air Horn Gasket (‘07.5-‘22, 6.7L ) 4933235: $5.25 CUMMINS Intake Air Horn Replacement Gasket (‘07.5-‘18, 6.7L ) Requires 1 gasket for installation. 5264566: $4.95 CUMMINS Intake Air Horn Replacement Gasket (‘89-‘07, 5.9L ) NOTE: ‘89-‘98 12V requires (1) gasket; ‘98.5-‘07 requires (2) gaskets. 3969988: $8.00 MOPAR EGR Cooler Outlet Tube to Engine Block Seal (‘13-‘22, 6.7L ) 68211448: $3.95 CUMMINS EGR Valve Gasket (‘07.5-‘22, 6.7L ) Requires 2 gaskets for installation. Sold individually. 3979769: $2.95 MAHLE Exhaust Manifold Gasket Set (‘98-‘18, 5.9L & 6.7L) Includes 6 gaskets for installation. MS19225: $18.95 CUMMINS Exhaust Manifold Gasket (‘98.5-‘22, 5.9L & 6.7L ) Requires 6 gaskets for installation. Sold individually. 5447591: $7.95 CUMMINS Exhaust Manifold Gasket (‘89-‘98, 5.9L 12V ) Requires 6 gaskets for installation. Sold individually. 3927154: $9.50 MOPAR Exhaust to Turbo Gasket (‘07.5-‘18, 6.7L ) 68071676AA: $19.95 MAHLE Exhaust to Turbo Gasket (‘07.5-‘18, 6.7L ) F32901: $8.45 CUMMINS Turbo to Exhaust Manifold Gasket (‘19-‘22, 6.7L ) 5339363: $34.95 CUMMINS Turbo to Exhaust Manifold Gasket (‘13-‘18, 6.7L ) 5266419: $34.95 CUMMINS Turbo to Exhaust Manifold Gasket (‘07.5-‘12, 6.7L ) 5260648: $12.95 CUMMINS Turbo to Exhaust Manifold Gasket (‘03-‘07, 5.9L ) 3949530: $6.95 CUMMINS Turbo to Exhaust Manifold Gasket (‘89-‘02, 5.9L ) 3901356: $6.95 MOPAR Particulate Filter to Catalytic Converter Gasket (‘19-‘22, 6.7L ) Will not work with 3500 Cab/Chassis. 68379574: $16.95 MOPAR Exhaust Downpipe to Turbo & Downpipe to Particulate Filter Gasket (‘19-‘22, 6.7L ) 68437471: $10.25 MOPAR Exhaust Downpipe to Catalytic Converter (‘07.5-‘18, 6.7L 2500/3500) 52122213AB: $20.95 MAHLE Turbo Mount Gasket Kit (‘07.5-‘18, 6.7L) GS33616: $23.95 MAHLE Turbo Mount Gasket Kit (‘03-‘07, 24V 5.9L) GS33584: $14.95 MAHLE Turbo Mount Gasket Kit (‘98.5-‘02, 24V 5.9L) GS33583: $13.95 MAHLE Turbo Mount Gasket Kit (‘91.5-‘98, 12V 5.9L) GS33582: $15.95 CUMMINS HX35 Turbo Housing to Turbo Elbow - 5-bolt gasket (5.9L) 3535001: $13.95 CUMMINS T4 Undivided Turbo Flange Gasket (5.9L) 3755843: $22.95 MOPAR Turbo Oil Drain Gasket (‘13-‘22, 6.7L ) 05183354AB: $8.95 CUMMINS Turbo Oil Drain Gasket (‘03-‘12, 5.9L & 6.7L ) 5264568: $3.95 CUMMINS Turbo Oil Drain Gasket (‘89-‘02, 5.9L) 5264569: $3.95 CUMMINS Turbo Oil Drain O-ring (‘03-‘22, 5.9L & 6.7L) Fits nipple pressed into the engine block. 2 required per application. 3928624: $4.95 CUMMINS Turbo Oil Drain O-ring (‘94-‘07, 5.9L) Fits nipple pressed into the engine block. 1 required per application. 3931824: $4.95 CUMMINS Turbo Coolant Line Sealing Washer (‘07.5-‘22, 6.7L ) 3963991: $6.95 GENOS Turbo Coolant Line Sealing Washer (‘07.5-‘22, 6.7L ) GG-3963991: $3.95 CUMMINS Oil Cooler to Engine Block Gasket (‘07.5-‘23, 6.7L) 2830559: $17.95 CUMMINS Oil Cooler to Oil Filter Head Gasket (‘07.5-‘23, 6.7L) 3974127: $14.25 CUMMINS Oil Cooler to Engine Block Gasket (‘03-‘07, 5.9L) 4895742: $38.95 CUMMINS Oil Cooler to Oil Filter Head Gasket (‘03-‘07, 5.9L) 3864458: $23.95 CUMMINS Oil Cooler to Engine Block Gasket (‘89-‘02, 5.9L) 4932124: $44.95 CUMMINS Oil Cooler to Oil Filter Head Gasket (‘97-‘02, 5.9L 12V & 24V ) 3942915: $24.95 CUMMINS Oil Cooler to Oil Filter Head Gasket (‘89-‘96, 5.9L 12V ) 3929792: $25.95 CUMMINS P7100 to Gearhousing O-ring (‘94-‘98, 5.9L 12V ) 3969698: $15.95 CUMMINS VP44 Pump to Gear Case O-ring (‘98.5-‘02) 3935032: $3.95 CUMMINS VE Pump to Gear Housing Gasket (‘89-‘93) 3939355: $6.50 CUMMINS CP3 Injection Pump Gear Access Cover - Seal only. (‘03-‘18, 5.9L & 6.7L) 3946689: $4.95 CUMMINS CP3 Injection Pump Gear Access - Cover & Seal. (‘03-‘18, 5.9L & 6.7L) 4935281: $9.95 CUMMINS Fuel Pre-Heater and Lift Pump Gasket (‘89-‘98, 5.9L 12V ) 3939258: $4.95 CUMMINS Fuel Pre-Heater Upper Gasket (‘94-‘98, 5.9L 12V ) 3834185-S: $6.95
Hood Insulation Liner ‘94-’02, 2500/3500
‘94-’01, 1500
The two primary purposes of your truck’s hood insulation liner are to help absorb engine noise, and to insulate against heat transfer to the hood. Over time, the liner will stain, snag and tear, diminishing the overall appearance of the engine compartment, but more importantly, reducing the hood liner’s effectiveness for noise and heat reduction.
Replace your truck’s old and worn hood liner with this direct replacement hood insulation liner. We’ve had it designed and cut just right, specifically to fit your 1994-2002 Dodge Ram 2500/3500 (also fits 1994-2001 Dodge 1500). For a quick and simple installation, we include all new secure mounting clips.
Available in two styles.
Mounting hardware included.
Standard Fiberglass Style GG-HIL9402-R: $59.95
Our 1/2” thick fiberglass non-lined hood liner is similar in density and thickness to the OE molded version.
Polyurethane heavy-duty Engine Mounts (‘89-’93)
PB2710: $149.95 pair
These are solid polyurethane inserts with an internal locking system where the factory ones have an external safety lock. Features stainless steel hardware. Fits all Dodge pickups equipped with the Cummins engine from ‘89-‘93.
Mounts: 3” x 3-1/2” and 1-3/4” thick.
HEAVY-DUTY REAR ENGINE/TRANSMISSION POLYURETHANE MOUNT (‘89-‘02, 2500/3500)
‘94-‘02 PB2852 $99.95 ‘89-‘93 PB1604 $30.95 pair (‘89-‘93 4x4 only)
This heavy duty, polyurethane bushing is a direct replacement for the stock mount. Fits in the same location, easy to install.
Polyurethane heavy-duty Engine Mount insertS ‘94-’02
PB2453KIT: $199.95 pair
These are a solid polyurethane mount where the factory ones are rubber with gapped holes in them. These are not inserts that fit inside the stock rubber, but a replacement for the whole rubber mount. To install, remove the old rubber from the engine mount and replace with these.
Motor Mount REINFORCEMENTS
‘98.5-‘02, 24V ES_51116G: $60.93
‘94-‘98, 12V ES_51114G: $71.52
Motor mount inserts sold in Black only.
NOTE: These are not replacement bushings, just reinforcements.
Foil-Lined Style GG-HIL9402-F: $149.95
Our New Foil Lined Hood Insulation features a 1/2” thick insulation pad sealed on both sides with Aluminum Foil. This Aluminum Foil greatly increases its heat rejection, sound deadening, overall durability and it looks good!
Throttle Sensitivity Booster
VERSION 3
‘07-‘23, 5.9L & 6.7L 2500/3500/4500/5500
Manual/Automatic Transmission
‘14-‘19, Ram 1500 EcoDiesel Automatic Transmission
(2019 Ram 1500 Classic only.)
BD-1057932: $289.95
‘05-‘06, 5.9L Manual & Automatic Transmission
BD-1057931: $289.95
VERSION 1
‘98.5-‘02, 24V Manual Transmission only.
BD-1057730: $269.95
The BD Throttle Sensitivity Booster provides instant throttle response and reduced pedal lag for your Ram Turbo Diesel truck. You get adjustable sensitivity levels of +50% and +100% Modes. An optional dash switch is available that gives you multiple setting options compared to only two with the standard module.
cummins REAR frost plug plate
‘89-‘02, 5.9L
Rear coolant frost plug plate
BD-1040022: $62.95
‘03-‘18, 5.9L & 6.7L
Rear coolant frost plug plate
BD-1040023: $62.95
Repair a leaky rear frost plug on the rear of the engine without having to hammer out the old leaking frost plug or remove the engine. The rear plate seals with a large O-ring on the OEM-machined face at the rear of the motor. While the frost plug plate can be installed with the transmission in place, it is recommended installing the rear frost plug plate with the transmission removed.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 68 Ram Turbo Diesel Parts & Accessories #121
ENGINE PARTS & UNDERHOOD PARTS/ACCESSORIES
PB2852 shown
Standard fiberglass style shown
VERSION 3 VERSION 1
NO START TIP (‘94-‘98 12-valve engines)
Should the fuel START/RUN solenoid fail to energize (come up) and/or hold in the “UP” position, do not let its malfunction leave you stranded. Have an assistant attempt to start your truck while you move the solenoid’s plunger up to the “RUN” position. If it starts and the solenoid holds in the “RUN” position, drive it to your destination for further troubleshooting as time permits. If the solenoid fails to hold in the “RUN” position, tie-wrap it in the “RUN” position, and drive it to your destination. Cut the wrap, and the engine will stop.
So, we presented a tip to get you to a desired location. Does the problem lie with the solenoid, the relay to the solenoid, the fuseable link that feeds the solenoid or a fuse?
Do a voltage check at the solenoid’s three-wire connector. Negative goes to the Black/Red trace wire. On “START”, positive 12-volts will be at the Red/Black trace wire.
If voltage is present for “START” the solenoid is likely the problem.
No voltage for “START”? Chances are that the solenoid is okay. Check the relay, fuseable link or fuse #9 as the source of the electrical malfunction.
ENGINE ACCESSORY REBUILD KITS
AFTERMARKET Fuel Solenoid Saver Diode (‘94-‘98)
Save the fuel solenoid from burning up if the starter sticks on.
AFTERMARKET 65 amp Fusible Link (‘94-‘98)
Protection for the power supply to the fuel shutoff solenoid.
Fuel Shutoff Solenoid, Bracket & Relay (‘94-‘98) T he P7100 pump on the ‘94-‘98 Dodge/Cummins 12-valve engine utilizes a 12-volt electric solenoid that, over time, may stop functioning. Get a replacement solenoid to keep on hand in case your truck runs into trouble.
SPECIAL: Mounting Bracket and Fuel Shutoff Relay included with this solenoid kit.
Fuel Solenoid Replacement Boot (‘94-‘98)
Replace a torn boot on the fuel shutoff solenoid and help prevent damage to it.
AFTERMARKET Fuel Shutoff Relay (‘94-‘98)
This 70 amp relay activates the fuel solenoid.
Starter Solenoid Rebuild Kit (‘89-‘06) Designed to carry twice the amperage load for easier starting and longer life. The SuperSize Contacts fit perfectly and are a replacement for the common problem of sticking and clicking stock starter contacts in ‘89-‘06 starters.
SS99: $25.95
FL90: $16.95
SA-4981-12: $99.95
SA-4153: $11.95
SS70A: $13.95
PLUNGER & CONTACTS
GD-G11S: $19.95
PLUNGER • CONTACTS • INSTALL DVD
GD-G11SKIT: $29.99
Battery Side
Starter Stud Repair Kit (‘89-‘02) Occasionally a loose battery cable at the starter can cause arcing/corrosion and the starter stud may be damaged causing difficult removal. Replace the starter stud with this kit if it is damaged. Kits include copper stud with knurl for battery cable connection, washer, nut, O-ring and all insulators.
BATTERY SIDE STUD KIT
GD-2791: $19. 95
MOTOR SIDE STUD KIT
GD-3160: $19. 95
BOSCH ALTERNATOR
DENSO Kit
BOSCH Kit
Alternator Rebuild Kits The most common problem with an alternator is that the brushes wear out. Without brush-to-armature contact there is no electrical charge. Some truck owners replace alternators. Budget conscious owners rebuild the alternator with new brushes and bearings prior to complete failure.
Rebuild kit for ‘08-‘10 trucks fits Bosch alternators only.
Vacuum Pump Reseal Kit (‘91.5-‘02) This kit repairs the engine oil leak where the power steering pump joins the vacuum pump. This is a common leak since the seal inside the vacuum pump ages with time. Why buy a new vacuum pump when you can rebuild it?
Rebuild kits come with DVD instructions, written instructions, a modified seal, extra O-rings, and a Cummins gasket to reinstall the pump to the engine.
Vacuum Pump Seal Kit (‘91.5-‘02) This kit includes only the vacuum pump seals and is designed for those experienced in vacuum pump repair. Extra O-rings and a dual lip seal are included in the kit.
Vacuum Pump Seal Retainer Kit (‘96-‘02)
2 piece vacuum pump.
Vacuum Pump/Power Steering Pump Couple Gear & Disc (‘91.5-‘02)
This rebuild kit will fit Wabco vacuum pumps only. It will not work on aftermarket vacuum pumps.
Installation DVD included.
Replacement Vacuum Pump Fiber Vane Set (‘91.5-‘02)
REBUILD KIT (‘08-‘10, 6.7L )
GD-ARK-01308: $39.99
BOSCH ALTERNATOR
REBUILD KIT (‘03-‘07, 5.9L)
GD-ARK-0307: $34.99
BOSCH ALTERNATOR
REBUILD KIT (‘98-‘02)
GD-ARK-B: $34.99
DENSO ALTERNATOR
REBUILD KIT (‘89-‘02)
GD-ARK-DENSO: $34.99
REBUILD KIT (‘96-‘02)
GD-VPRK-9602: $59.99
REBUILD KIT (‘91.5-‘95)
GD-VPRK-9195: $59.99
GD-GG03XP-VPSK: $31.99
GD-GG2022: $61.00
GD-GG915-2002: $61.00
Order 770-886-2500 or genosgarage.com 69 Product prices subject to change without notice. REBUILD KITS & REPLACEMENT PARTS
Motor Side
GD-10FV: $24.00
H TDR78, p92-93
No voltage for “START” tells you to check the relay to the solenoid (Item 1).
Also check the fuseable link that feeds the solenoid (Item 2) or fuse #9 in the fuse panel.
1989-1993 FIRST GENERATION
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 70 Ram Turbo Diesel Parts & Accessories #121 REBUILD KITS & REPLACEMENT PARTS
Oil Pressure Sensor (‘90-‘98, 12V) 2 prong connector CUMMINS 3923200 $109.95 MOPAR 53030493AB $49.95 CUMMINS Speed/Crank Position Sensor (‘89-‘97) 3924432 $187.95 GATES Tensioner Pulley (‘89-‘02) GATES-36094 $26.95 Tensioner Pulley Assembly (‘89-‘02) GATES GATES-38157 $56.95 CUMMINS 5333499 $171.95 CUMMINS Oil Cap Seal & Oil Fill Neck Seal (‘89-‘98, 12V) Seal can be used for either application. 3936876 $4.95 CUMMINS Pushrod/Tappet Cover (‘89-‘98, 12V) Find gaskets on page 66. 3990732 $230.95 CUMMINS Tappet Cover Bolt Grommet/Seal (‘89-‘98, 12V) (6 grommets/seals required per cover.) 3900267 5.95 each CUMMINS Timing Pin (‘89-‘98, 12V) 3903924 $9.95 CUMMINS Timing Pin O-ring (‘89-‘98, 12V) 3913994 $6.95 CUMMINS Timing Pin Retaining Ring (‘89-‘98, 12V) 3904849 $3.50 CUMMINS Timing Pin Housing (‘89-‘98, 12V) 3919683 $11.95 CUMMINS Timing Pin Housing Seal (‘89-‘98, 12V) 3915772 $6.95 CUMMINS Oil Cooler (‘89-‘02, 5.9L) Find gaskets on page 67. 3957544 $ 291.95 CUMMINS Replacement 12-valve Engine Nameplate Grommet (‘91.5-‘98) (2 required.) 3923206 $13.95 each CUMMINS Vacuum Pump Oil Supply Line (‘89-‘94) Short 4” long line. 3925100 $82.95 CUMMINS AFC Boost Reference Line (‘89-‘93) Attaches to VE pump diaphragm. Requires 2 sealing washers (3918188). See page 38. 3282437 $64.95 CUMMINS AFC Boost Line Banjo Bolt (‘89-‘93) Requires 2 - 8mm banjo gaskets (3918188). See page 38. 3924724 $28.95
CUMMINS Heater Tube (‘89-‘98, 12V) Tube closest to the fender. 3912086 $204.95 CUMMINS Heater Tube (‘89-‘98, 12V) Tube closest to the valve cover. 3912087 $259.95 CUMMINS Heater Tube to Block (‘89-‘98, 12V) Tube with 90 ˚ elbow. 3957649 $33.95 CUMMINS Heater Tube to Block (‘89-‘98, 12V) Straight coupling tube. 3931522 $12.95 CUMMINS Heater Tube Elbow & Coupling Clamp for 3931522 & 3957649 (‘89-‘98, 12V) 2 required per coupling. 3931545 $6.95 each MOPAR Bellcrank Throttle Bushings (‘89-‘98, 12V) 2 required per vehicle. 4425053 $11.25 each CUMMINS Bell Housing Barring Tool Plug (‘89-‘23, 5.9 & 6.7)) Includes O -ring. NEW! 3910248 $13.95 DORMAN Throttle Position Sensor (‘90-‘93) DRM904342 $89.95 TPS/APPS Delete (‘91.5-‘98, 12V) LD-TPSDEL $30.00 CUMMINS Grid Heater (‘89-‘93, 12V) This part is for trucks with separate grid heater and plenum. Gaskets on page 67. 3929108 $319.95 CUMMINS 1-Piece Grid Heater and Plenum (‘89-‘98, 12V) This part is for trucks where grid heater and plenum are one piece. Gaskets on page 67. 3926381 $889.95 AFTERMARKET Grid Heater Relay (‘89-‘02) RELAY-75565 $28.95 CUMMINS Intake Air Temperature Sensor (‘89-‘91) Non-intercooled engines. 3613547 $61.95 CUMMINS Intake Air Temperature Sensor (‘91.5-‘97) 3918461 $60.95 CUMMINS Thermo Switch (‘89-‘93) 4327029 $93.95 CUMMINS Coolant Temperature Sensor (‘92-‘97) 3920363 $63.50 CUMMINS Coolant Temperature Sensor (‘89-‘91) For non-intercooled engines. 3912074 $61.95
1989-1993 FIRST GENERATION
1994-2002 SECOND GENERATION
AFTERMARKET Throttle Position Sensor (‘98.5-‘04, 24V) T his TPS fits trucks equipped with either a manual or automatic transmission. Once installed, calibration is required.
( Instructions included )
H TDBG Vintage, ‘94-‘04 Lock/Unlock
CUMMINS Throttle Position Sensor (‘94-‘98, 12V)
H TDR 83, p92-93: How to Calibrate
CUMMINS Throttle Position Sensor Bracket (‘94-‘98, 12V)
1994-2002 SECOND GENERATION
TPS/APPS Delete (‘91.5-‘98, 12V)
MOPAR Bellcrank Throttle Bushings (‘89-‘98, 12V) 2 required per vehicle.
CUMMINS Bell Housing Barring Tool Plug (‘89-‘23, 5.9 & 6.7)) Includes O -ring.
BD APPS Noise Isolator (‘94-‘04, 5.9L) Interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from ‘94 to ‘04 will create false voltage readings in the APPS/TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive. This part removes the RF interference.
MOPAR Throttle Cable Package (‘96-‘98, 12V) Built after 01/01/96. Includes upgraded throttle cable and bell crank lever. With 11mm hole.
MOPAR Throttle Cable Package (‘94-‘96, 12V) Built prior to 01/01/96. Includes upgraded throttle cable and bell crank lever. With 8mm hole.
Order 770-886-2500 or genosgarage.com 71 Product prices subject to change without notice. REBUILD KITS & REPLACEMENT PARTS
CUMMINS AFC Boost Reference Hose (‘94-‘98, 12V) Hose length; 7.5” 3991518 $32.95 CUMMINS AFC 90° Elbow Male Adpater (‘94-‘98, 12V) 3910265 $33.95 CUMMINS AFC Straight Male Connector (‘94-‘98, 12V) 3920803 $19.95 CUMMINS Crankcase Vent Filter (‘98.5-‘02) O-ring is included. 3944961 $74.95 CUMMINS Replacement Oil Fill Tube/ Crankcase Vent Filter O-ring (‘89-‘02, 12 & 24V) 3903475 $5.00 CUMMINS Grid Heater Kit (‘98.5-‘07) Includes (2) 3969988 gaskets for installation on page 67. 3969987-KIT $153.95 CUMMINS 1-Piece Grid Heater and Plenum (‘89-‘98, 12V) This part is for trucks where grid heater and plenum are one piece. Gaskets on page 67. 3926381 $889.00 DORMAN Grid Heater Relays (‘94-‘02) DRM904308 $58.95 AFTERMARKET Grid Heater Relay (‘89-‘02) RELAY-75565 $28.95 CUMMINS MAP Sensor Wiring Harness (‘02) *Required for 4921505 on ‘02 trucks. 3104228 $66.50 CUMMINS MAP Sensor (‘01-‘02) *‘02 trucks require 3104228 adapter. 4921505 $193.95 CUMMINS MAP Sensor (‘98.5-‘00) 4921497 $113.50 CUMMINS MAP Sensor Wiring Harness (‘98.5-‘00) For 4921497 on ‘98.5-‘02 trucks. 3824256 $15.95 CUMMINS Intake Air Temperature Sensor (‘98.5-‘02) 3408345 $47.95 CUMMINS Intake Air Temperature Sensor (‘98, 12V) 3932272 $108.95 CUMMINS Intake Air Temperature Sensor (‘89-‘97) 3918461 $60.95
TPS98502 $199.95
TPS3930318 $318.95
3925380 $38.95
LD-TPS-DEL $30.00
4425053 $11.25 each
NEW! 3910248 $13.95 I
BD-1300030 $34.95
Throttle
53031626AC $37.95
MOPAR
Cable (‘98.5-‘02)
04897407AA $67.95
04897406AA $61.95
Throttle
Kickdown Cable (‘94-‘98, 5.9L 12V 2500/3500) 52079204 $85.95
Throttle Valve/Transmission Kickdown Cable (‘98.5-‘04, 5.9L
2500/3500) 52107742AC $63.95
HX35 Turbocharger Adjustable Wastegate
Will not work on HY35 Turbo. BD-1047151 $228.95
On 1998.5 trucks with HX35 Turbo only. BD-1047150 $278.95
MOPAR
Valve/Transmission
MOPAR
24V
BD
Actuator (‘99-‘02)
BD Adjustable Wastegate Actuator (‘94-‘98.5)
1994-2002 SECOND GENERATION
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 72 Ram Turbo Diesel Parts & Accessories #121 REBUILD KITS & REPLACEMENT PARTS 1994-2002 SECOND GENERATION CUMMINS Coolant Temperature Sensor (‘98-‘02) & (‘04.5-‘23) 4954905 $23.95 CUMMINS Coolant Temperature Sensor (‘98, 12V) 3920364 $61.95 CUMMINS Coolant Temperature Sensor (‘92-‘97) 3920363 $63.50 CUMMINS Coolant Check Valve (‘94-‘98, 5.9L 12V) NEW! 3926761 $77.00 Oil Pressure Sensor (‘98.5-‘02) (24-valve, 3 prong connector) Some 2002 models have 1 wire. Please inspect before ordering. CUMMINS 4326849 $99.95 PAI PAI-050656 $69.95 Oil Pressure Sensor (‘02-‘06) 2002 single wire only. CUMMINS 5677803 $32.95 PAI PAI-050665 $19.50 CUMMINS Oil Pressure Sensor (‘98, 12V) 2 prong connector 3932300 $114.95 MOPAR Oil Pressure Sensor (‘94-‘98) (12-valve, 2 prong connector) 56031005 $55.95 Oil Pressure Sensor (‘90-‘98) (12-valve, 2 prong connector) CUMMINS 3923200 $109.95 MOPAR 53030493AB $49.95 CUMMINS Cam Position Sensor (‘98.5-‘02) 5491993 $31.95 CUMMINS Crank Position Sensor (‘98.5-‘02) ‘01-‘02 trucks should not have a CPS so check by the starter before ordering. 5491995 $99.95 CUMMINS Speed/Crank Position Sensor (‘97-‘98, 12V) 3923129 $180.95 CUMMINS Speed/Crank Position Sensor (‘89-‘97) 3924432 $187.95 CUMMINS Crankcase Breather Molded Hose (‘98.5-‘02, 24V) 3945268 $ 39.95 CUMMINS Valve Cover Isolator/Seal (‘98.5-‘02, 24V) (5 seals required per valve cover.) 3946168 $16.95 each CUMMINS Oil Cooler (‘89-‘02, 5.9L) Find gaskets on page 7. 3957544 $ 291.95
Tensioner Pulley Assembly (‘89-‘02) CUMMINS 5333499 $171.95 GATES GATES-38157 $56.95 GATES Tensioner Pulley (‘89-‘02) GATES-36094 $26.95 GATES Accessory Drive Belt Kit (‘94-‘02, 5.9L) Kit includes heavy-duty replacement serpentine belt and tensioner assembly. GATES90K38157A $86.95 CUMMINS Pushrod/Tappet Cover Noise Panel (‘94-‘98, 12V) 3924606 $225.95 CUMMINS Pushrod/Tappet Cover (‘98.5-‘02, 24V) Find gaskets on page 66. 3936249 $118.95 CUMMINS Pushrod/Tappet Cover (‘89-‘98, 12V) Find gaskets on page 66. 3990732 $230.95 CUMMINS Tappet Cover Bolt Grommet/Seal (‘98.5-‘02, 24V) (6 grommets/seals required per cover.) 3928759 $4.95 each CUMMINS Tappet Cover Bolt Grommet/Seal (‘89-‘98, 12V) (6 grommets/seals required per cover.) 3900267 $5.95 each CUMMINS Replacement 12-valve Engine Nameplate Grommet (‘91.5-‘98) (2 required.) 3923206 $13.95 each MOPAR Vacuum Line Feed Line (‘97-‘02) Pump to firewall with check valve. 55056421AA $17.95 CUMMINS Vacuum Pump Oil Line Fitting (‘97-‘02) Fitting is attached to the engine block. 3941472 $14.95 AFTERMARKET Vacuum Pump Oil Line Seal (‘98.5-‘02) This rubber o-ring goes from oil line to block seal. Works with #3941472. GG-VPFS9702 $1.95 CUMMINS Vacuum Pump to Engine Block Oil Line (‘98.5-‘02) Over time this line can leak. Replace it with this OEM part. 3934396 $77.95 CUMMINS Vacuum Pump to Engine Block Oil Line (‘94-‘98) 7” 3923084 $74.95 CUMMINS Vacuum Pump to Engine Block Oil Line (‘89-‘94) 4” 3925100 $82.95 CUMMINS Vacuum Pump Support Bracket (‘94-’02, 5.9L) 3919619 $ 65.95
1994-2002 SECOND GENERATION
CUMMINS Engine Oil Dipstick and Handle (‘01-‘02, 24V)
Blade style. Length: 47”
You must purchase dipstick tube #3937749 together with this part.
CUMMINS Dipstick Tube (‘01-‘02,
This dipstick tube is for use with #3937748.
Hood Pad Retaining Clip Kit (‘94-‘02) This kit has all 15 clips required to replace the broken clips and put the hood pad back where it belongs.
2003-2009 THIRD GENERATION
MOPAR Accelerator Pedal Throttle Position Sensor ( TPS) with Pedal (‘09-‘23)
Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.
MOPAR Accelerator Pedal Throttle Position Sensor (TPS) with Pedal (‘09-‘23)
Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.
MOPAR Accelerator Pedal Position Sensor (TPS) with non-Adjustable Pedal (‘07-‘08)
Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.
MOPAR Accelerator Pedal Position Sensor (TPS) with Adjustable Pedal (‘07-‘08)
Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.
DORMAN Throttle Pedal and Shift Linkage Bushing Kit (‘03-‘09) Assorted bushings.
AFTERMARKET Throttle Position Sensor (‘98.5-‘04, 24V) This TPS fits trucks equipped with either a manual or automatic transmission. Once installed, calibration is required. ( Instructions included )
NOTE: Only works on trucks equipped with APPS installed on bellcrank assembly, not under the driver’s side battery.
BD APPS Noise Isolator (‘94-‘04, 5.9L) Remove the interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from ‘94 to ‘04 that will create false voltage readings in the APPS/ TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive.
Order 770-886-2500 or genosgarage.com 73 Product prices subject to change without notice. REBUILD KITS & REPLACEMENT PARTS
TPS68043161AD $156.95
TPS53034160AE $193.95
TPS53034003AC $169.95
TPS53034004AE $151.95
DRM14041 $6.95
I
TPS98502 $199.95
BD-1300030 $34.95
H TDBG, Vintage ‘94-‘04 Lock/Unlock
3937748 $15.95
3937749 $155.95 CUMMINS Engine Oil Dipstick and Handle (‘98.5-‘00, 24V) Blade style. Length: 44” 3935648 $51.95 CUMMINS Engine Oil Dipstick and Handle (‘96-‘98, 12V) Blade style. Length: 45” 3923128 $56.95 CUMMINS Engine Oil Dipstick and Handle (‘94-‘95, 12V) Blade style. Length: 45” 3928740 $108.50 MOPAR Transmission Oil Dipstick (‘94-‘02) 46RH, 46RE, 47RH and 47RE 52107769AE $43.95 Replacement Oil Cap (‘98.5-‘23) Replacement seal available on page 66. CUMMINS 3973511 $44.95 MOPAR 68003321AA $59.95 CUMMINS Replacement Oil Cap (‘89-‘98, 12V) 4962608_KIT $30.95 CUMMINS Oil Cap Seal & Oil Fill Neck Seal (‘89-‘98, 12V) Seal can be used for either application. 3936876 $4.95 DORMAN Underhood Lamp Replacement (‘99-‘17) ‘99-‘17, 1500/2500/3500 ‘08-‘17, 4500/5500 Lamp only. DRM68203 $10.95 DORMAN Windshield Washer Reservoir Cap ‘03-‘09, 2500/3500 ‘10, 3500/4500/5500 C&C ‘02-‘08, 1500 DRM47339 $12.95 MOPAR Battery Hold Down Strap (‘94-‘02) 55275220 $29.95 DORMAN Battery Hold Down Kit (‘94-‘02) DRM00582 $12.95
Power Steering Reservoir Cap (‘89-‘02) DRM82577 $11.95
cap, 2500/3500) DRM42053 $13.95
GG-HOODCL $9.95
Universal Underhood Insulation Pad Retainers
as a pair. DRM963571 $4.95
24V)
DORMAN
DORMAN Brake Master Cylinder Cap (‘98-UP w/threaded
DORMAN
Sold
2003-2009 THIRD GENERATION
CUMMINS Crankcase Vent Filter (‘07.5-‘23)
Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles.
Find gasket #3999820 for install on page 66. You may receive a CV52001 or CV54003. CV54003 is the OEM CCV filter for Mopar.
MOPAR Crankcase Vent Filter (‘07.5-‘23)
Replaces the filter on top of the valve cover assembly. The suggested change interval is 67,500 miles.
Find gasket #3999820 for install on page 66.
Vent Filter (‘03-‘05) Replaces the filter on top of the valve cover assembly.
Breather Oil Drain Tube (‘03-‘05, 5.9L) Replace the oil drain tube when the rubber couplers tear or get brittle and break due to age (Small).
2003-2009 THIRD GENERATION
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 74 Ram Turbo Diesel Parts & Accessories #121 REBUILD KITS & REPLACEMENT PARTS
CV520010 $103.95
68002433AC $152.95 CUMMINS
3957987 $90.95 MOPAR Crankcase Breather TubeSmall (‘06-‘07) 05179092AB $24.95 MOPAR Crankcase Breather Tube
Large (‘06-‘07) 05179093AB $30.95 CUMMINS Crankcase
5265106 $38.95 CUMMINS Crankcase
5265108 $36.95 MOPAR Diesel Particulate Filter (DPF) Pressure Sensor (‘07.5-‘12, 6.7L) 5149229AA $179.00 Crank/Cam Position Sensor (‘03-‘18, 5.9L & 6.7L) CUMMINS 5594275 $49.95 PAI PAI-050695 $32.95 Crankcase Pressure Sensor (‘07.5-‘22, 6.7L) Mounted on top of valve cover behind CV filter. CUMMINS 5462277NX $106.95 PAI PAI-050590 $42.95 Intake Air Temperature Sensor(‘07.5-‘22, 6.7L) CUMMINS 2897332NX $106.95 PAI PAI-050624 $36.95 MOPAR Inlet Air Temperature Sensor/MAF (‘03-‘07, 5.9L) 68430063AA $96.95
Crankcase
-
Breather Vent Tube (‘03-‘05, 5.9L) Replace the vent tube when the rubber couplers tear or get brittle and break due to age (Large).
CUMMINS Diesel MAP Sensor (‘03-‘07, 5.9L) 3971106 $90.95 MAP Sensor O-ring (‘03-‘07, 5.9L) O-ring for MAP sensor #3971106 GGOR3971106 $2.25 Diesel MAP Sensor (‘07.5-‘18, 6.7L) Mounted in intake plenum. CUMMINS 2897333NX $110.95 PAI PAI-050634 $60.95 CUMMINS Air Intake Grid Heater Kit (‘98.5-‘07) Includes (2) 3969988 gaskets for installation. 3969987-KIT $153.95 MOPAR Grid Heater Relay (‘06-‘18) (1) required per vehicle. 5187880AC $63.95 DORMAN Grid Heater Relay (‘06-‘18) (1) required per vehicle. DRM904300 $37.95 MOPAR Air Intake Grid Heater Relay (‘03-‘05) (2) required per vehicle. 68188370AA $35.95 DORMAN Grid Heater Relay (‘03-‘05) (2) required per vehicle. DRM904356 $28.95 MOPAR Grid Heater Fusible Link (‘06-‘09, 2500/3500 & ‘08-’10, 3500/4500/5500 CC) 56051717AB $54.95 MOPAR Exhaust Back Pressure Sensor Tube (‘07.5-‘12, 6.7L) 68038087AA $73.95 MOPAR EGR Exhaust Gas Temperature Sensor (‘07.5-‘12, 6.7L) 5149085AC $61.95 CUMMINS EGR Exhaust Gas Temperature Sensor (‘07.5-‘22, 6.7L) 2872858 $69.95
2003-2009 THIRD GENERATION
Order 770-886-2500 or genosgarage.com 75 Product prices subject to change without notice. REBUILD KITS & REPLACEMENT PARTS
Exhaust Pressure Sensor (‘07.5-‘18, 6.7L) CUMMINS 4928594 $165.95 PAI PAI-050659 $77.95 CUMMINS Coolant Temperature Sensor (‘98.5-‘02) & (‘04.5-‘23) 4954905 $23.95 CUMMINS Coolant Temperature Sensor (‘03-‘04) 4897224 $48.95 CUMMINS Oil Pressure Sensor (‘07-‘18) 6456801 $69.95 Oil Pressure Sensor (‘02-‘06) 2002 single wire only. CUMMINS 5677803 $32.95 PAI PAI-050665 $19.50 FLEECE Turbo Speed Sensor (‘07.5-‘18, 6.7L) NEW! FPE-351-SPSEN $146.99 BD Diesel Aftermarket Turbo Wastegate Solenoid (‘04.5-‘07, 5.9L) BD-1045921 $199.95 CUMMINS Stock Turbo Wastegate Solenoid (‘04.5-‘07, 5.9L) 4036054 $715.00 BD Wastegate Actuator Kit (‘03-‘07, 5.9L) BD-1047154 $228.95 DAYCO Tensioner Pulley (‘03-‘23, 5.9L & 6.7L) DAYCO_89094 $41.25 CUMMINS Idler Pulley (‘03-‘23, 5.9L & 6.7L) 4946708 $222.00 GATES Idler Pulley (‘03-‘23) GATES-36315 $68.95
2003-2009 THIRD GENERATION
DORMAN Electric Vacuum Pump (‘03-‘04, 5.9L, 2500/3500) DRM904214 $94.95 OEM Vacuum Pump Diaphragm for Jacobs Exhaust Brake (‘03-‘07, 5.9L) GD_GG09_ DIPH_0307 $79.95 OEM Vacuum Pump for Jacobs Exhaust Brake (‘03-‘07, 5.9L) Includes pulley. GD_GG09_ 0307_PUMP $349.00
Oil Cooler Find gaskets on page 67. ‘07.5-‘23, 6.7L 3975818 $289.95 ‘03-‘07, 5.9L 3959031 $357.00 68RFE Transmission Oil Dipstick (‘07.5-‘19, 6.7L) Also works as a level indicator tool for 2020-2023, 6.7L. 53034117AB $22.95 MOPAR Transmissions Dipstick (‘03-‘07.5, 5.9L) 47RE and 48RE 53032605AB $12.95 CUMMINS Engine Oil Dipstick and Handle (‘03-‘07, 5.9L) Flat blade style. Length: 44.5” 3959009 $16.95 CUMMINS Engine Oil Dipstick and Handle (‘07, 5.9L) Cable style. Length: 41” 68002976AA $82.95 CUMMINS Engine Oil Dipstick and Handle (‘07.5-‘23, 6.7L) Cable style. Length: 42” 4938970 $43.95
heater hose #05179114AB (page 28). (Mopar #5179115AA) 4930327 $4.95
For heater hose
28). (Mopar #5086819AA) 3930310 $5.95
CUMMINS
CUMMINS Spring Hose Clamp (‘06-‘07, 5.9L) For
CUMMINS Spring Hose Clamp (‘03-‘07, 5.9L)
#3967022 & #05086822AB (page
(‘03-‘23, 5.9L & 6.7L)
GATES Accessory Drive Belt Kit (‘03-‘12, 5.9L & 6.7L) Kit includes heavy-duty replacement serpentine belt, belt tensioner/idler pulley assembly.
2010-2023 FOURTH GENERATION
CUMMINS Crankcase Vent Filter (‘07.5-‘23)
Replaces the filter on top of the valve cover assembly.
The suggested change interval is 67,500 miles.
Find gasket #3999820 for install on page 66. You may receive a CV52001 or CV54003. CV54003 is the OEM CCV filter for Mopar.
MOPAR Crankcase Vent Filter (‘07.5-‘23)
Replaces the filter on top of the valve cover assembly.
The suggested change interval is 67,500 miles. Find gasket #3999820 for install on page 66.
CUMMINS Bell Housing Adapter Seal (‘03-‘22) This seal goes between the bell housing adapter and camshaft.
CUMMINS Bell Housing Barring Tool Plug (‘89-‘23, 5.9 &
DORMAN Underhood
(‘07.5-‘22, 6.7L) Mounted on top of valve cover behind CV filter.
to the TPS you have in your truck before purchase of new part.
MOPAR Accelerator Pedal Throttle Position Sensor ( TPS) with Pedal (‘09-‘23)
Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.
MOPAR Accelerator Pedal Throttle Position Sensor (TPS) with Pedal (‘09-‘23)
Multiple TPS versions for these years. Check which TPS you have in your truck before purchase of new part.
CUMMINS Mass Flow Sensor (‘07.5-‘18, 6.7L)
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 76 Ram Turbo Diesel Parts & Accessories #121 REBUILD KITS & REPLACEMENT PARTS
CV520010 $103.95
68002433AC $152.95 CUMMINS DPF Pressure Sensor (‘07.5-‘12, 6.7L) 5149229AA $179.00 Crankcase Pressure
CUMMINS 5462277NX $71.95 PAI PAI-050590 $42.95 MOPAR Intake Cover with Grid Heater (‘13-‘22, 6.7L) Find gaskets on page 67 68210071AA $650.95 MOPAR Intake Cover with Grid Heater (‘07.5-‘12, 6.7L) Find gaskets on page 67 68069387AA $350.00 Grid Heater Relay (‘06-‘18) One per vehicle. MOPAR 5187880AC $64.95 DORMAN DRM904300 $37.95 MOPAR Grid Heater Fusible Link (‘13-‘18, 2500/3500 6.7L) 68236141AA $144.95 MOPAR Grid Heater Fusible Link (‘06-‘09, 2500/3500 & ‘08-’10, 3500/4500/5500 CC) 56051717AB $54.95 CUMMINS Bell Housing Barring Tool Plug (‘89-‘23, 5.9 & 6.7)) Includes O -ring. NEW! 3910248 $13.95 MOPAR Accelerator Pedal Throttle Position Sensor ( TPS) with Pedal (‘12-‘23, 2500/3500)
68044317AD $159.00
Sensor
Compare
TPS68043161AD $156.95
$193.95
TPS53034160AE
Mounted on
housing. 4984760 $185.50 2003-2009 THIRD GENERATION Tensioner Assembly
CUMMINS 3947574 $171.95 GATES GATES-38285 $102.95
air filter
GATES90K38285 $209.95
4945701 $3.95
6.7))
O -ring. NEW! 3910248 $13.95
Includes
Lamp Replacement (‘99-‘17) ‘99-‘17, 1500/2500/3500 ‘08-‘17, 4500/5500 Lamp only. DRM68203 $10.95 DORMAN Windshield Washer Fluid Reservoir (‘06-‘09, 2500/3500) DRM603214 $65.95 DORMAN Windshield Washer Reservoir Cap ‘03-‘09, 2500/3500 ‘10, 3500/4500/5500 C&C ‘02-‘08, 1500 DRM47339 $12.95 CUMMINS Valve Cover Bolt (‘03-‘04) Works together with O-ring 3087740 Sold individually. 3900633 $4.25 Replacement Oil Cap (‘98.5-‘23) Replacement seal available on page 66. CUMMINS 3973511 $44.95 MOPAR 68003321AA $59.95 MOPAR Power Steering Pump Reservoir Cap (‘03-‘07) MOP-52106856AC $15.95 DORMAN Brake Master Cylinder Cap (‘98-UP w/threaded cap, 2500/3500) DRM42053 $13.50 MOPAR Hood Strut (‘03-‘09) 55276321AC $64.95 each DORMAN Universal Underhood Insulation Pad Retainers Sold as a pair. DRM963571 $4.95
2010-2023 FOURTH GENERATION
2010-2023 FOURTH GENERATION
Order 770-886-2500 or genosgarage.com 77 Product prices subject to change without notice. REBUILD KITS & REPLACEMENT PARTS
Intake Air Temp Sensor (‘07.5-‘22, 6.7L) CUMMINS 2897332NX $106.95 PAI PAI-050624 $36.95 Diesel MAP Sensor (‘19-‘22, 6.7L) Mounted in intake plenum. 2897334NX $99.95 Diesel MAP Sensor (‘07.5-‘18, 6.7L) Mounted in intake plenum. CUMMINS 2897333NX $110.95 PAI PAI-050634 $60.95 CUMMINS Crank/Cam Position Sensor (‘19-‘22, 2500/3500/4500/5500 6.7L) 5491326 $56.95 CUMMINS Crank/Cam Position Sensor (‘03-‘18, 5.9L & 6.7L) CUMMINS 5594275 $49.95 PAI PAI-050695 $32.95 CUMMINS Coolant Temperature Sensor (‘98.5-‘02) & (‘04.5-23) 4954905 $23.95 MOPAR Exhaust Back Pressure Sensor Tube (‘13-‘22, 6.7L, 2500/3500) Will not fit cab & chassis models. 68290469AA $137.95 MOPAR EGR Exhaust Gas Temperature Sensor (‘13-‘18, 6.7L) 68085774AB $62.95 MOPAR EGR Exhaust Gas Temperature Sensor (‘07.5-‘12, 6.7L) 5149085AC $61.95 CUMMINS EGR Exhaust Gas Temperature Sensor (‘07.5-‘22, 6.7L) 2872858 $69.95 Exhaust Pressure Sensor (‘07.5-‘18, 6.7L) CUMMINS 4928594 $165.95 PAI PAI-050659 $77.95 FLEECE Turbo Speed Sensor (‘07.5-‘18, 6.7L) NEW! FPE-351-SPSEN $146.99 DORMAN Brake Master Cylinder Cap (‘98-UP w/threaded cap, 2500/3500) DRM42053 $13.50 MOPAR Hood Strut (‘10-‘18) 5160343AA $56.95 each DORMAN Universal Underhood Insulation Pad Retainers Sold as a pair. DRM963571 $4.95 CUMMINS Lower Radiator Inlet Hose Adapter Ring Seal (‘94-‘22) For inlet hose to engine block. 3906697 $4.25 MOPAR Urea Tank Module Seal and O-Ring (‘13-’23, 2500/3500) 68101172AA $23.95
MOPAR DEF Injector Thermal Cover (‘13-’18, 2500/3500/4500) 68564806AA $32.95 MOPAR DEF Injector with Gasket (‘13-’23, 2500/3500) 4627241AF $215.95 MOPAR DEF Injector Gasket (‘13-’23, 2500/3500) 4627714AA $17.95 Replacement Oil Cap (‘98.5-‘23) Replacement seal available on page 66. CUMMINS 3973511 $44.95 MOPAR 68003321AA $59.95 CUMMINS Oil Cooler (‘07.5-‘23, 6.7L) Find gaskets on page 67. 3975818 $289.95 CUMMINS Oil Pressure Sensor (‘07-‘18) 6456801 $87.95 CUMMINS Engine Oil Dipstick and Handle (‘07.5-‘23, 6.7L) Cable style. Length: 42” 4938970 $43.95 DAYCO Tensioner Pulley (‘03-‘23, 5.9L & 6.7L) DAYCO_89094 $41.25 Idler Pulley (‘03-‘23, 5.9L & 6.7L) CUMMINS 4946708 $222.00 GATES GATES-36315 $68.95 Tensioner Assembly (‘03-‘23, 5.9L & 6.7L) CUMMINS 3947574 $171.95 GATES GATES-38285 $102.95 GATES Accessory Drive Belt Kit (‘03-‘12, 5.9L & 6.7L) Kit includes heavy-duty replacement serpentine belt, belt tensioner assembly and idler pulley. GATES-90K38285 $209.95 MOPAR Aisin Transmission Fluid Dipstick (‘13-‘23, 3500 Pickup & 3500/4500/5500 CC) 4627905AC $36.95 MOPAR Aisin Transmission Fluid Dipstick (‘11-‘12, 3500 Pickup & 3500/4500/5500) NEW! 53032947AE $22.95 68RFE Transmission Fluid Dipstick (‘07.5-‘19, 6.7L) Also works as a level indicator tool for 2020-2023, 6.7L. 53034117AB $22.95 DORMAN Underhood Lamp Replacement (‘99-‘17) ‘99-‘17, 1500/2500/3500 ‘08-‘17, 4500/5500 Lamp only. DRM68203 $10.95 DORMAN Windshield Washer Fluid Reservoir (‘10-‘16, 2500/3500 & ‘11-‘16 4500/5500) DRM603660 $162.95 DORMAN Windshield Washer Reservoir Cap ‘10, 3500/4500/5500 C&C DRM47339 $12.95
DIFFERENTIAL COVER AND TRANSMISSION GASKETS
RAM 1500 ECODIESEL TRANS FILTER & GASKET, ‘14-’23
DRM265850F: $69.95
Replacement filter and gasket only. Only works with Dorman trans pan, DRM265850.
RAM 1500 ECODIESEL TRANS PAN, FILTER, PLUG & GASKET KIT, ‘14-’23
DRM265850: $189.95
This kit allows you to replace the filter only unlike the OEM pan.
4WD TRANSFER CASE SUPPORT BRACKET KIT (‘03-’07)
TC48REAC: $126.95
4WD transfer case housings on trucks with 48RE transmissions often crack and this is typically due to the lack of support of the heavy transfer case. This kit has been designed to solve this problem and is easy to install.
A specially designed steel bracket installs in place of the lower two bolts (longer bolts supplied), and includes the common universal mount.
NOTE: Must have factory skid plate installed to work.
‘13-‘22, Ram 3500, ‘14-‘22, Ram 2500 ‘94-‘01, Ram 2500/3500 ‘19-‘22, Ram 4500/5500 BD-1030703: $178.95 ‘09-‘22, Ram 1500 BD-1030705: $178.95
This BD kit is designed to allow the truck owner to manually disable the front wheel drive mechanism by holding the hubs free (2WD) mode with the transfer case in 4WD-Low range. With this kit installed, the front wheels will NOT be driven through the transfer case.
Transmission Valve Body Electronics Upgrade Kit (‘00-‘07, 5.9L)
BD-1060605: $260.95
A leading cause of faults with the 47RE/48RE transmission is the failed plastic governor pressure transducer. The BD kit replaces this with a durable metal unit, includes an electronic adapter to prevent over pressure codes and has a built-in temperature sensor for reliability.
Transmission
COOLER BYPASS DELETE
‘19-‘22, 68RFE & AS69RC BD-1061527: $105.95
‘13-‘18, 68RFE & AS69RC BD-1061528: $105.95
Debris in the stock cooler bypass valve can cause it to jam the internal valve keeping it in recirculation mode. When this happens the transmission temperature will rise and can lead to overheating and premature transmission failure. The BD Cooler Bypass Delete keeps the transmission cooler operational all the time and eliminates this failure prone item.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 78 Ram Turbo Diesel Parts & Accessories #121 DRIVETRAIN PARTS & ACCESSORIES
2-Low Transfer Case Kit
MOPAR Differential Cover Gasket - REAR (‘19-‘23) 11.5 and 12 American Axle (68RFE & Aisin Transmission) 68454491AA $28.95 MOPAR Differential Cover Gasket - REAR (‘03-‘18) 11.5 and 11.8 American Axle ( ALL except ‘03 Automatic) 5086905AA $33.95 MOPAR Differential Cover Gasket - REAR (‘03) 10.5 American Axle (2500 Automatic) 5086777AA $28.95 MOPAR Differential Cover Gasket - FRONT (‘13-‘23) 9.25 American Axle (‘14-‘23, 2500/3500 & ‘13-‘23, 3500) 68216204AA $26.95 MOPAR Differential Cover Gasket - FRONT (‘03-‘13) 9.25 American Axle (‘03-‘12, 2500/3500 & ‘13, 2500) 5086682AA $39.95 Mag-Hytec Replacement O-ring Kit - Dana 60, 70, & AA 12-9.25 For Mag-Hytec Differential Covers MH-568-275 $16.00 Mag-Hytec Replacement O-ring Kit - Dana 80 For Mag-Hytec Differential Covers MH-568-277 $16.00 Mag-Hytec Replacement O-ring Kit - AA 14-11.5 & AA14-10.5 For Mag-Hytec Differential Covers MH-568-278 $16.00 MOPAR 68RFE Transmission Filter Lip Seal for Sump Filter (‘07.5-‘23) 4799964AD $4.95 MOPAR - RTV Sealer, Recommended for 68RFE (‘07.5-‘23, 6.7L) For 4WD and 2WD trucks. 05010884AD $6.95 MOPAR 68RFE Transmission Pan Gasket (‘07.5-‘23) For use with OEM transmission pans. 68425659 $35.95 Mag-Hytec 68RFE Transmission Pan Gasket Not for use with OEM transmission pans. MH-68RFE-GASKET $20.00 Mag-Hytec 727 Transmission Pan Gasket Not for use with OEM transmission pans. MH-GASKET $6.50 MOPAR Aisin Transmission Pan Gasket (‘13-‘23) For AS69RC Automatic transmissions. 68214914AA $24.95 MOPAR Aisin Transmission Drain Plug Gasket (‘13-‘23) For AS69RC Automatic transmissions. 68085955AA $5.95 MOPAR Aisin Transmission Pan Gasket (‘07.5-‘12, 4WD & 2WD) Aisin AS68RC 6-speed Automatic 68020049AA $44.95 Dana Transmission Pan Gasket (‘89-‘07 ) 5.9L engines. MSI7784 $25.95 PTO Gasket (‘89-‘23) GG-PTOGSKT $5.25 MOPAR EcoDiesel Transmission Pan, Gasket, Filter and Drain Plug Kit (‘14-‘23, 3.0L) For the 8HP70 8-speed transmission only. 68225344AA $199.95 MOPAR EcoDiesel Transmission Pan Gasket (‘14-‘23, 3.0L) For 8HP70 8-speed transmission only. 68172556AA $12.95 MOPAR EcoDiesel Transmission Fill Plug (‘14-‘23, 3.0L) For 8HP70 8-speed transmission only. 68145443AA $10.36
SOUTH BEND CLUTCH
Heavy-Duty Hydraulic Clutch Slave and Master Cylinder Assembly
No bleeding of master cylinder required.
*NOTE: ‘03-‘18 #HYD-X-750 not for use with G56 transmission with OEM dual mass flywheel.
*(‘03-‘18) Adj. HYD-X-750: $362.54 (‘98-‘02) Adj. HYD-X-150: $ 362.54 (‘94-‘97 ) Non-Adj. HYD-X-HD: $ 362.54
DORMAN Automatic Transmission Pressure Transducer (‘11-‘22) Trucks with 68RFE transmission. DRM601215
DORMAN Automatic Transmission Pressure Transducer (‘00-‘07) Trucks with the 47RE and 48RE transmissions.
DORMAN Automatic Transmission Output Speed Sensor (‘94-‘07)
Sensor with Pinion & Pigtail 3 Wire (‘93-‘97)
MOPAR Front Axle Locker (‘13-‘18, 4x4)
‘13-‘18
MOPAR Transfer Case Shift Indicator Switch (‘03, ‘05-‘20, 2500/3500/4500/5500)
For trucks with 271 Series transfer case.
** Please compare to stock sensor before ordering. Requires a 1-1/2” socket or wrench for removal. **
DORMAN Transfer Case Indicator Mode Switch (‘03, ‘05-‘20, 2500/3500/4500/5500)
For trucks with 271 Series transfer case.
**Please compare to stock sensor before ordering. Requires a 1-1/2” socket or wrench for removal. **
MOPAR
** Please compare to stock sensor before ordering. Requires a 7/8” socket or wrench for removal. **
5083138AA $79.95
Order 770-886-2500 or genosgarage.com 79 Product prices subject to change without notice. DRIVETRAIN PARTS & ACCESSORIES
$64.95
DRM601016 $69.95
DRM917602 $19.95 Speed
GG-5013660AA $36.95
Ram 3500 ‘14-‘18 Ram 3500 Chassis/Cab ‘14-‘18 Ram 2500 68216944AA $399.95 DORMAN Transfer Case Shift Motor (‘13-‘18, 6.7L) Trucks with transfer case Model BW44-46 DRM600908 $171.95 DORMAN NV273 Transfer Case Shift Motor (‘06-‘12) For Ram 2500/3500/4500/5500 trucks. DRM600935 $309.95 DORMAN Transfer Case Shift Motor ‘03-‘05, 2500/3500, NVG 273 ‘04-‘05, 1500, NVG 243 OR NVG 244 ‘03 1500, NVG 273 DRM600936 $159.95 MOPAR 4WD Transfer Case Vacuum Harness (‘98-‘01) For Ram 1500/2500/3500 trucks. 52105317AB $28.95 MOPAR 4WD Transfer Case Vacuum Harness (‘94-‘97) For Ram 1500/2500/3500 trucks. 52078361 $28.95 MOPAR Transfer Case Shift Linkage (‘05-‘12) For Ram 1500/2500/3500 trucks with NVG271 transfer case and linkage is 12.75” long. 55366066AB $36.95 DORMAN Transfer Case Shift Linkage with Grommets (‘03-‘05) For Ram 1500/2500/3500 trucks with NVG271 transfer case and 11” rod. DRM926884 $34.95 MOPAR Transfer Case Shift Linkage (‘03-‘05) For Ram 1500/2500/3500 trucks with NVG271
52105580AA $25.95
For
52105006 $29.95
Shift
For
cases. DRM14078 $9.95 each
Transfer
Shift Indicator Switch (‘13-‘23, 6.7L) Trucks
68211454AA $70.00
transfer case and 16.5” long shift rod.
MOPAR Transfer Case Shift Linkage (‘98-‘02)
Ram 1500/2500/3500 trucks with 231 and 241 transfer case. Bolt included.
DORMAN Transfer Case
Linkage Grommet (‘03-‘12)
use with 241 and 271 transfer
MOPAR
Case
with transfer case Model BW44-47
DRM600555 $56.95
Transfer Case Shift
Switch
Indicator
(‘04-‘11)
05134375AA $39.95
Transfer Case Switch (‘97-‘02) DRM600550 $13.95
Transfer Case Switch (‘94-‘00) DRM49314 $16.95 MOPAR Backup Lamp Switch (‘05-‘18) For G56 transmission. 68089074AA $31.95 MOPAR Backup Lamp Switch (‘94-‘05) For NV4500 and NV5600 transmission. 56007270 $46.95 MOPAR Transmission Shift Cable - 48RE (‘03-‘07, 5.9L 12V 2500/3500) 52107846 $129.95 MOPAR Transmission Kickdown Cable (‘98.5-‘04, 5.9L 24V 2500/3500) 52107742AC $63.95 MOPAR Transmission Kickdown Cable (‘94-‘98, 5.9L 12V 2500/3500) 52079204 $85.95 DORMAN Wheel Speed Sensor, 2WD (‘00-‘02) DRM970168 $60.00 DORMAN Axle Actuator Housing, 4WD (‘94-‘02) DRM917500 $26.50 DORMAN Axle Actuator, 4WD (‘94-‘02) DRM600202 $126.95 MOPAR Transmission Kickdown Cable Return Spring (‘90-‘04) 53009055 $4.95 DORMAN G56 Manual Transmission Inner Shift Boot (‘05-‘18) DRM926134 $16.95 CUMMINS 47RE & 48RE Automatic Transmission 90° Oil Cooler Hose (‘98.5-‘07, 5.9L) 4930889 $33.95 CUMMINS Automatic Transmission Oil Cooler Hose Spring Clamp (‘98.5-‘07, 5.9L) For hose #4930889. 2 clamps required per hose. 3931545 $6.95 each 68RFE Transmission Spin-on Filter Stainless Steel Nipple Upgrade (‘07.5-‘23) 1/2 Allen tool on page 82 GG-68RFEN $17.00 MOPAR 8HP70 8-Speed Automatic Transmission Fill Plug (‘14-‘23) 68145443AA $15.95 MOPAR Aisin AS69RC Transmission Drain Plug Gasket (‘13-‘23) 68085955 $5.95
DORMAN
DORMAN
One of our best selling items is the Haynes Repair Manual for the Dodge Ram pickups. The staff likens this manual to the “Cliff Notes” used by students in lieu of reading the entire book.
However, there are times when you need the detail of the Dodge Factory Service Manual (yes, the same one you can order out of the back of your Owner’s Manual). The factory service manual CD is the authoritative source for specifications, reuse, wiring, and diagnostics. Every Dodge Turbo Diesel owner who does their own maintenance should have the factory manual.
If the Owner’s Manual for your Dodge Ram Turbo Diesel truck is missing or has seen better days, you can affordably replace it with these new manuals.
*For service manuals for trucks newer than the ‘08 year model, there is only one source: www.techauthority.com
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 80 Ram Turbo Diesel Parts & Accessories #121 SERVICE & OWNER’S MANUALS
YEAR & APPLICATION PART#
YEAR / PN PRINT CD 2008 DFSM08 $649.00 $39.00 2007 DFSM07 $599.00 $39.00 2006 DFSM06 $550.95 $39.00 2005 DFSM05 $499.95 $39.00 2004 DFSM04 $194.95 $39.00 2003 DFSM03 $152.95 $39.00 2002 DFSM02 $152.95 $39.00 2001 DFSM01 $193.95 $39.00 2000 DFSM00 $159.95 $39.00 1999 DFSM99 $143.95 $39.00 1998 DFSM98 $158.95 $39.00 1997 DFSM97 $134.95 $39.00 1996 DFSM96 $135.95 $39.00 1995 DFSM95 $123.95 $39.00 1994 DFSM94 $118.95 $39.00 1993 DFSM93 $129.95 $39.00 1992 DFSM92 $109.95 $39.00 1991 DFSM91 $124.95 $39.00 1990 DFSM90 $129.95 $39.00 1989 DFSM89 $119.95 $39.00
RAM TRUCK Factory Service Manuals
NEW NEW
Plug-All Vacuum & Fuel Stoppers An assortment of plugs and caps. Plugs fit 1/8”, 3/16”, 1/4”, 5/16”, 3/8” and 1/2” hoses. Tapered caps close tubes from 1/8” to 1/2”.
1-1/2” Needle Nose Grease Gun Adapter Used for greasing the front axle Cardan Joint.
Throttle Pedal Depressor Perfect for cold weather truck warm-up, the tool holds throttle at a constant rpm. Engage the nylon hook under the steering wheel. Then extend the depressor rod to the accelerator pedal. Use the adjustment screw to fine-tune the rpm level. Tool is 40” in overall length.
Circuit Tester Hook Tool Have you pricked your finger with one of those electrical probe tools? How about grounding out the wire you were testing? The spring loaded hook pulls the wire into the sharp probe. Perfect for hard-to-reach locations. No more pricked fingers.
Micro-V Heavy Duty Strap Wrench Originally developed to grasp and hold automotive belt driven pulleys such as fan clutch pulleys, but will also help hold other items as well. Made with a heavy duty aluminum handle and highly durable composite locking head. Strong nylon belt.
WIF Sensor Wrench (‘13-‘18, 6.7L) For use when replacing the fuel filter or when servicing the water sensor. The plastic sensor has a new hex design that is easily damaged by tools, like pliers, that do not specifically fit the sensor.
Dogbone Fuel Filter Cap Combo Wrench & WIF Sensor Wrench (‘13-‘18, 6.7L) As the description reads, this nifty tool is a “2fer.” The curved end gives you extra leverage and clearance on the hard-to-reach fuel filter cap. The straight end fits over the WIF sensor on the chassis-mounted fuel filter.
68RFE Transmission Filter Removal Tool, 65mm While this tool was developed for another application, we found that it is perfect for removing the spin-on transmission filter #5179267AD in the 68RFE transmission.
Billet Aluminum Oil Filter Tool/Plug (‘13-‘23, 6.7L) Used to plug the oil filter when changing oil on ‘13-‘23 Ram Cummins 2500/3500 Heavy Duty trucks. Threads into the filter for a secure seal so the filter can be removed or installed without spilling oil.
End Cap Oil Filter Wrench (‘03-‘23, 5.9L & 6.7L) Cup design allows easy filter removal and installation from the end of LF5083285AA, LF16035 and LF3972 oil filters, even in tight locations. Use with 3/8” square drive. Important: match fluted end of the oil filter with the filter wrench to ensure you have the proper wrench size. Due to limited clearance, we recommend this for 2003 & newer models. ( NOTE: Ratchet is not included )
‘Big Range’ Oil Filter Strap Wrench Adjusts quickly to remove spin-on oil or fuel filters up to 6” in diameter. Use with 1/2” or 3/4” wrench. Strong nylon belt.
Oil Filter Plug (‘13-‘23, 6.7L) Used to plug the oil filter when changing oil on ‘13-‘23 Ram Cummins 2500/3500 Heavy Duty trucks. Threads into the filter for a secure seal so the filter can be removed or installed without spilling oil.
Order 770-886-2500 or genosgarage.com 81 Product prices subject to change without notice. SPECIALTY TOOL BIN
THX312 $13.95
KTI73903 $7.95
LC48700 $27.95
LC25600 $14.95
GATES-910131 $49.95
LC34900
$10.95
GG-DB1 $14.95
LC61600 $9.95
LT-OFC-TOOL $31.95
LC61580 $9.95
LC63500 $12.95
LC57180 $12.95
Billet Aluminum Oil Filter Removal Tool (‘03-‘23, 5.9L & 6.7L) Use this tool to remove the oil filter on Ram Cummins Turbo Diesel trucks. Use a 19mm/3/4” socket or wrench. Fits 93mm filters with 15 flutes (LF5083285AA, LF3972 and LF16035 ). Due to limited clearance, we recommend this for 2003 & newer models. LT-93MM-SOCKET $59.95
Ram 1500 EcoDiesel 27mm Low Profile Oil Filter Cap Socket (‘14-‘23, 3.0L)
Helps remove and install oil filters on ‘14-‘23 Ram 1500 EcoDiesel trucks. LC13320 $8.95
Ram 1500 EcoDiesel Fuel Filter Removal Tool (‘14-‘19, 3.0L)
The wrench fits snugly on the bottom of the fuel filter canister and grabs the four tabs on the outside of it. Will not work on ‘20-up Ram 1500 EcoDiesel trucks.
28mm Fuel Filter Socket (‘10-‘23, 6.7L & ‘20-‘23, 1500 EcoDiesel ) Are you tired of busted nuts? Try our new no-slip 28mm fuel filter cap socket which has no slop in the socket-to-plastic raised hex. 3/8” drive, 6-point socket. Black hard-annodized for durabililty. Made in the U.S.A. GG-SOCKET28
Fuel Filter Socket - Low Profile, 28mm (‘10-‘23, 6.7L & ‘20-‘23, 1500 EcoDiesel ) Helps remove and install the fuel filter canister on ‘10-23, 6.7L Cummins engines. Use the low profile, 3/8” drive, 28mm socket on the raised hex on the fuel filter housing.
Fuel Filter Socket, 29mm (‘00-‘07, 5.9L) Helps remove and install fuel filters on ‘00-‘07, 5.9L Cummins engines. Use the low profile, 3/8” drive, 29mm socket on the raised hex on the fuel filter housing.
DEF Tester Had a bottle of Diesel Exhaust Fluid sitting around for awhile? Nervous about putting it in your truck’s DEF tank? Check it first with this handy DEF tester.
Threaded Super Funnel Perfect for hands-free filling on threaded valve cover openings. This two-piece funnel can be used separately or threaded together for a long super funnel. The larger section screws into threaded oil filler openings found on many Dodge Ram trucks, holding the funnel upright for quick, mess free oil fills.
Jay’s EZ Funnel This multi-use funnel is perfect for all applications. Replace the lubricant cap with Jay’s EZ Funnel. Dispense the liquid using only Jay’s EZ Funnel or attach the flex tubing for hard to reach places. Place Jay’s EZ Funnel into the lubrication port (orifice). Gently squeeze the bottle to dispense the lubricant. When you have dispensed the desired amount of liquid, simply stop squeezing the bottle. The lubricant will retract.
*Does not work with Amsoil bottles.
JAYS-EZ-FUNNEL
E10 Torx Socket For external torx bolts on 11.8 differential cover used on ‘13-‘18 Ram trucks. 3/8” drive. LC26820
Get
technical information at our website: https://www.genosgarage.com/tech_info 82 Ram Turbo Diesel Parts & Accessories #121 SPECIALTY TOOL BIN
Ram Cummins
LT-ECO-FUEL-TOOL $59.95
$15.95
LC13290 $9.95
LC14600 $9.95
THX108
$22.95
LC19802
$7.95
$8.95
GG-12ALLEN
17mm
17MM_TOOL
14mm
14MM_TOOL
$5.95
1/2”
Allen-Head Tool For 68RFE Transmission Spin-on Filter #5179267AD Nipple Removal.
$6.95
Allen-Head Tool For NV5600 Transmission Fill Plug Removal.
$11.25
Allen-Head Tool For G56 Transmission Fill Plug Removal.
$8.95
SCHLEY Common Rail Injector Puller (‘03-‘18, 6.7L & 5.9L) Instead of trying to pry or use vise grips to remove the injector from the cylinder head damaging it, use this tool to do it properly and get your core charge back.
SCH17200 $98.95
SCHLEY Flare Nut Wrench - 24mm The 24mm flare nut wrench is designed to fit into the confined area of the Cummins cylinder head and hold the 24mm fuel line flare nut while the 19mm fuel coupler nut is loosened. For use with ‘03-‘18 HPCR engines.
SCHLEY Injection Pump and Idle Lock Nut Wrench - 13mm (‘89-‘98, 12V) This offest wrench is designed to remove and install the 13mm injection pump mounting bolts and idle lock nuts found on the 5.9L engines.
CTA Fuel Injection Flare Nut Socket (19mm) The area surrounding the injection pumps on ‘94-‘18, 5.9L and 6.7L engines is very difficult to access when removing the fuel supply lines. This tool is designed with a slim configuration and 1/2” drive to fit into this confined area.
Tork Tool Injection Pump Gear Puller (VE, P7100, VP44, CP3) Removing the gear from a Cummins VE, P7100, VP44 or CP3 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool.
SCH66150 $39.95
SCH89100 $36.95
CTA2220X19 $26.43
CGP020 $38.99
Tork Tool Injection Pump Gear Puller (VE, P7100, VP44) Removing the gear from a Cummins VE, P7100, or VP44 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool. CGP010
Tork Tool Injector Puller (‘89-‘98, 12V) Pulls Cummins injectors fast! This heavy-duty tool was designed to remove Cummins 6BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector.
Tork Tool Injector Puller (‘98-‘02, 24V) This heavy-duty tool was designed to make injector changing on a Cummins engine a simple project. The CIP040 features a thick wall tube and a custom washer that is machined to center on the tube. This automatically centers the tool over the injector body.
Common Rail Crossover Tube Remover (‘03-‘18, 5.9L & 6.7L) This tool is designed to be used on ‘03-‘18 Dodge Cummins Turbo Diesel trucks to make pulling the common rail connector tube an easier job.
Tork Tool Common Rail Crossover Tube Remover (‘03-‘18, 5.9L & 6.7L) This tool is designed to be used on ‘03-‘18 Dodge Cummins Turbo Diesel trucks to make pulling the common rail connector tube an easier job. CRCTR010 $19.49
Tork Tool Injector Crossover Tube Puller (‘98.5-‘02, 5.9L) This tool is made to be used on ‘98.5-‘02 Dodge Cummins Turbo Diesel trucks to make pulling the crossover tube an easier job.
Fuel Rail Pressure Block Off Tool (‘07.5-‘18, 6.7L) Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.
Fuel Rail Pressure Block Off Tool (‘03-‘07, 5.9L) Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.
HPCR Fuel Pump Return Flow Test Kit (‘03-‘07, 5.9L) This kit allows you to check the operation of a rail pressure relief valve and check for excessive return fuel flow from the CP3 pump. The individual tools may also be used for tests specified in the manual. Kit includes: (1) 12mm & (1) 14mm test fitting, gaskets, fuel line and a 1000cc clear plastic beaker.
Order 770-886-2500 or genosgarage.com 83 Product prices subject to change without notice. SPECIALTY TOOL BIN
$25.99
CIP030 $24.49
CIP040 $39.49
CTA2746 $10.70
24VCTR010 $18.75
LT-TESTCA2 $19.95
LT-TESTCA $19.95
GG-FPRKIT 44.95
Tork Tool 24-Valve Spring Compressor The Cummins Valve Spring Compressor features a tapered design that reduces the chance of losing a valve keeper. Included in the Tork Teknology kit are hex head bolts for the bridge, custom machined bridge, compressor plate, washer, flange nut and detailed instructions.
Tork Tool 12-Valve Spring Compressor Compress two valve springs at one time with this Cummins 12-valve spring compressor. This tool features tapered cones on the top plate which makes installation of the keepers super easy. You simply adjust the height of the plate, place a keeper on the ramp, and slide the keeper onto the valve stem.
Flat Band Hose Clamp This tool removes and installs flat band hose clamps used on heater and radiator hoses. Tips screw in and out to fit all clamp sizes. Ratcheting lock mechanism holds the clamp in an open position for each removal and installation. Tips can be switched to accommodate different applications. Offset jaws allow access in hard-to-reach areas.
5.9L & 6.7L Use the correct tool and make the job of replacing a front cover
5.9L & 6.7L Use the correct tool and make the job of replacing a front
Scissor Disconnect Tool (5/16” and 3/8” Lines) Disconnnect tool for metal lines used on fuel and air conditioning lines with spring lock connectors. It makes disconnecting the lines a quick and easy job.
Fin Straightener Comb Set Clean and straighten condenser and evaporator coil fins with this tool. Includes 12 different size fin combs to cover almost any application. Comb 1: 8, 9, 10, 12, 14, 15 fins per inch. Comb 2: 10.5, 11, 13, 18, 20, 22 fins per inch.
Hose Remover Pliers For removal of 5/32” to 1/2” vacuum and fuel hoses. Engage the tube (line) with the black jaw. This sharpened jaw actually “DIGS” into the tube to grip it! Squeeze and the hose is easily pushed off by the silver jaw.
OTC Flexible Hose Clamp Pliers Use these pliers to remove hoses in those hard to reach places.
2-piece Hose Removal Hook Set Made for getting to those hard to remove hoses that are tucked between various fittings inlcuding heater and radiator hoses, seals and transmission lines. Set includes two hook tools. Each tool is roughly 8” long.
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info 84 Ram Turbo Diesel Parts & Accessories #121 SPECIALTY TOOL BIN
CVSC010 $86.99
CVSC020 $45.25
LC17100 $27.95
‘89-‘22,
CTA5041 $60.75 CUMMINS Front
Crankshaft
crankshaft seal
one time deal. 3824498 $151.95 CTA Front Cover Crankshaft Wear Sleeve Install Tool, ‘89-‘18 5.9L & 6.7L CTA5046 $42.87 CUMMINS Front Cover Crankshaft Wear Sleeve Install Tool, ‘89-‘18 5.9L & 6.7L 3824500 $130.95 CTA Rear Crankshaft Seal Remover and Install Tool, ‘89-‘18 5.9L & 6.7L CTA3880 $205.09 Scissor Disconnect Tool (3/4”, 5/8”, 1/2”, 3/8” Lines) Disconnnect tool for metal lines used on air conditioning lines with spring lock connectors. It makes disconnecting the lines a quick and easy job. LC63730 $11.95
CTA Front Cover Crankshaft Seal Tool,
crankshaft seal a one time deal.
Cover
Seal Tool, ‘89-‘22,
cover
a
LC39930 $9.95
ROB18403 $18.95
LC47900 $10.95
OTC4525 $59.95
AST9502 $7.95
Oil Pressure Switch Socket Fits 1-1/16” oil pressure sending unit (gauge type), found on most all ‘87 and newer Chrysler vehicles with combination light and gauge oil pressure switches. Use with 3/8” drive ratchet.
Engine Barring Tool (‘89-‘23, 5.9L & 6.7L) Get this tool to turn the engine over when servicing the valves. Insert this metal barring tool into the flywheel housing to engage the flywheel ring gear. The engine can then be turned by hand using a 1/2-inch drive ratchet or breaker bar.
FLEECE Crankshaft Barring Tool (‘89-‘23, 5.9L & 6.7L) Attaches to harmonic damper bolts and allows you to turn your Cummins over with ease using 1/2 drive ratchet.
10mm Wrench This 10mm wrench has a 12-point box end and is a must use tool to remove the top bolt on the starter on the Dodge/Cummins Turbo Diesel 5.9L and 6.7L engines. WRENCH-10MM $6.25
Quick Quad Brake Pad Spreader This tool can be used while the brake caliper is on the vehicle or hanging free. Works on single, double, quad and six piston calipers.
Brake Bleeder The kit has everything needed to bleed your brakes with no mess. The plastic bottle collects the fluid, and three adapters fit common bleeder screws.
Handy Bearing Packer Quickly flushes out old grease and repacks bearings with less mess. The Handy Packer works on bearings up to 3-1/2” OD. To pack a bearing, place the bearing on the piston. Press down on the cap until the old grease is forced out and the new grease shows on top of the bearing.
Brake/Hydraulic Clutch Fluid Tester Quickly determine the percentage of moisture in brake fluid or hydraulic clutch fluid. The tool uses red, yellow, and green indicator lights for easy readings. Includes a handy pocket clip and AAA battery.
GATES Serpentine Belt Guide Tool Works great when you’re installing a serpentine belt in a very narrow location with not a lot of room to maneuver the belt.
Serpentine Belt Tension Tool Helps release the tension on spring loaded pulley tensioners in tight locations. Fits idler pulleys requiring 15mm, 16mm, or 18mm hex, and 3/8” or 1/2” square drive. Also includes 13mm, 14mm and 15mm crowfoot wrenches. WLMW84010
Pneumatic Fan Clutch Removal Set (‘89-‘23) Quickly removes and installs fan clutch. No holding wrench is necessary. Set includes 7 driving wrenches that fit your Ram Turbo Diesel truck and many other applications. Includes 7/8”, 32mm, 36mm, 40mm thin 47mm, 1-7/8”and 2” sizes. Use with an air hammer. Includes blow molded storage case.
Fan Clutch Removal Wrench Set (‘91.5-‘23, 5.9L & 6.7L) Make removing the fan clutch easier on your 1991.5-2023 Dodge Ram 5.9L and 6.7L Cummins trucks with these newly redesigned full-sized and heavy-duty wrenches made specifically for the job. The newer wrenches now have 17” long tapered handles. We designed this tool set in-house and have a local machine shop manufacture them to our specifications. The set comes unfinished but, if you prefer, you can use Krylon to paint them.
Four Specialty wrenches come in this set, as follows:
1) 36mm Turning Wrench for 1991.5-2012 5.9L and 6.7L Cummins
2) 1-7/8” Turning Wrench for 2013-Up 5.9L and 6.7L Cummins
3) Counter Holding Wrench - holds the heads on the fan pulley. For 2003-Up 5.9L and 6.7L Cummins
4) Counter Holding Wrench - holds the heads on the fan pulley. For 1991.5-2002 5.9L Cummins
7-Spade RV Connector Maintenance Kit The IPA-8028 kit cleans both the male and female sides of the 7-spade harness. The kit’s circuit tester has LED lights that show that the connection at the pin is good, giving you confidence to troubleshoot wiring or light bulbs on the trailer.
GG-FC-WRENCHSET
Order 770-886-2500 or genosgarage.com 85 Product prices subject to change without notice. SPECIALTY TOOL BIN
LC13250
$10.95
TOOL_LTBT $34.95
NEW! FPE-CCBT $78.74
LC29100
$65.95
LC19200
$10.95
LC34550 $23.95
KTI70120 $47.95
GATES-91209 $19.95
$21.95
LC43300 $149.95
$58.95
IPA-8028 $46.95
46MM Drive Impact Socket (3/4” Drive - 6-point) For removing pitman arm on 2009 and up Ram trucks.
SUN446M $26.50
1-7/8” Drive Impact Socket (3/4” Drive - 6-point) For removing Dana 80 axle nut.
SUN460 $26.50
1-11/16”/43MM Drive Impact Socket (1/2” Drive - 6-point) Great socket for removing hub nuts.
CTA4145 $18.56
1-5/8” Drive Impact Socket (3/4” Drive - 6-point) For removing RWD axle nut on ‘94-‘02 Ram trucks.
Dodge Hub Remover Set Separates a frozen hub assembly from the steering knuckle. The tool drives on the bolt flange against loosened retaining bolts to separate assembly. Prevents damage to the knuckle and complete hub assembly. Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed. Kit contains 39300 for older, smaller applications and 39250 for 2003-newer 4WD 3/4 ton and 1 ton pickups.
15/16” Impact Socket (3/4” Drive - 6-point) Use this socket to remove the lug nuts on your Dodge Ram truck. A great tool to keep in your Boonie Box.
Impact Socket Adapter (1/2” female × 3/4” male) This adapter allows you to use your 1/2” drive ratchet with the 3/4” impact sockets so you don’t have to buy an expensive 3/4” drive ratchet.
Hog Ring Pliers Instead of fighting with a regular set of pliers to install hog rings on a new seat cushion cover, make the job easier with a set of these hog ring pliers. They have an indentation that keeps the hog ring in place while squeezing it closed.
Jumps-A-Fuse (36” Pin tip probe w/alligator clip) Have you needed a way to turn on a circuit without turning on your truck? Keep this alligator clip/probe handy (tool box, glove box) and jump-a-fuse. Fantastic idea. (Why didn’t I think of that?) For more details see TDR 118, p. 108.
SUN452 $22.95
LC38210 $34.95
Plastic Fastener Remover Perfect for removal of door trim that is held in place with plastic fasteners. LC35400 $8.95
Emblem/Wheel Weight Remover This plastic pry tool has sharp edges designed to get under the emblem or wheel weight to make removal easy.
5 Pc. Fastener & Trim Remover Set All the tools you will need to remove interior and exterior trim on your truck. AST4505 $12.95
Battery Brush Cleans dirt and corrosion from battery terminals and cable clamps. The external brush cleans cable clamps and internal brush cleans terminal posts. Case is made of high impact plastic that will not weaken in cleaning solutions. LC11120 $7.95
15 3/4” Flexible Magnetic Pick Up Tool Reach into small tight places with this flexible magnetic tool. MLK702270 $18.95
Telescoping Magnetic Pocket Pick Up Adjustable telescoping action will extend from 4-1/2” to 16-1/4”. Super strong neodymium magnet picks up all ferrous metal objects up to 2 lbs.
Get
technical information at our website: https://www.genosgarage.com/tech_info 86 Ram Turbo Diesel Parts & Accessories #121 SPECIALTY TOOL BIN
Ram Cummins
SUN430D $15.95
SUN2302
$12.95
HOGRINGPL
$16.95
GG-FUSEJUMP
$12.95
MLK282230 $14.50
ULL15X-DISP $6.95
‘Rapid Hitch’ aluminum Towing Hitch (up to 6” drop)
The Rapid Hitch tow bar system is the perfect hitch for anyone who tows multiple trailers. You can flip the double ball over, change the drop to a rise, or adjust the height of the drop all by simply removing the hitch pin and putting it back in place. With the easy height adjustment you can make sure you are keeping your trailer level. With the 2” and 2-5/16” ball combo, you cover most trailers on the road today. The 1-7/8” ball is available individually if desired. The various balls are easily changed by removing a hidden pin which attaches the ball to the ball housing. The aluminum Alumiball Combo Ball option is light and surprisingly strong. It only weighs 15 lbs. with the greaseless ball option making it easy to handle and adjust.
2-1/2” Receiver Hitch with Greaseless Alumiball Combo Ball (10,000/12,500 lb. GTWR; 1,500 lb. tongue ) RAPID-3405-25: $309.99
2-1/2” Receiver Hitch with Plated Steel Combo Ball (10,000/12,500 lb. GTWR; 1,500 lb. tongue ) RAPID-3410-25: $289.99
2” Receiver Hitch with Greaseless Alumiball Combo Ball
0 /8,000 lb. GTWR;
lb. tongue ) RAPID-3405: $266.99
2” Receiver Hitch with Plated Steel Combo Ball (8,00 0 /10,000 lb. GTWR; 1,500 lb. tongue ) RAPID-3410: $246.99
Trailer-Aid® PLUS
TRAILER-AID: $59.95
3405-25 Shown
Trailer-Aid PLUS allows you to changea tandem axle trailer flat without the inconvenience of jacking up the trailer. Simply drive the good tire/wheel onto the Trailer-Aid and the height of the axle will be sufficient to change the bad tire.
Order 770-886-2500 or genosgarage.com 87 Product prices subject to change without notice. T-SHIRTS, DECALS/FUN STUFF & TOWING
5.9L
EVOLUtION
TS-59ENG MED, LRG, XLRG: $14.95 2XLRG: $17.95 3XLRG: $19.95 Specify SIZE when ordering.
Spare ball assemblies and 2-pin lock kits available online.
ENGINE
T-shirt
TS-4GEN MED, LRG, XLRG: $14.95 2XLRG: $17.95 3XLRG: $19.95 Specify SIZE when ordering.
TDR and Geno’s logos on the front. FOUR GENERATIONS Blue T-Shirt
TS-EVO MED, LRG, XLRG: $14.95 2XLRG: $17.95 3XLRG: $19.95 Specify SIZE when ordering.
SUPPORT THE LBDT (LONG BED DIESEL TRUCK) COMMUNITY Geno’s GARAGE t-shirt ‘LONG BED DIESEL TRUCK’ TS-LBDT MED, LRG, XLRG: $14.95 2XLRG: $17.95 3XLRG: $19.95 Specify SIZE when ordering.
Geno’s logo on the front.
EVOLUTION T-Shirt
I
(6,00
1,500
Digi-camo Trucker Cap CAP-1533416:
CUMMINS CARHARTT® odessa Cap CAP-1513201: $29.95 CUMMINS Diesel Cross Mesh Cap CAP-1042043:
Historical
Engine Mesh Cap CAP-1244166: $11.95 GENO’S MESH BALL CAP CAP-GS14: $12.00 NEW CUMMINS vintage label Cap CAP-1506587: $12.95 CUMMINS rEALTREE® camo Cap CAP-1513200: $19.95 tan/grey chino twill Trucker mesh Cap CAP-1533413: $17.95 CUMMINS Denim mesh Cap CAP-400325: $11.95 Moret-shirtdesignsavailable online!
Hitch 8”Drop
Plated Steel Combo Ball (2” x 2 5/16”) (10,000/12,500 lb. GTWR; 1,500 lb. tongue ) RAPID-3445-25: 309.99
Receiver Hitch 8”Drop with Plated Steel Combo Ball (2” x 2 5/16”) (8,00 0 /10,000 lb. GTWR; 1,500 lb. tongue ) RAPID-3445: 266.99 NEW Poly Cotton Trucker mesh Cap CAP-1533414: $17.95
throwback Mesh Cap CAP-1452999: $26.95
CAP-1452990: $23.95 NEW NEW NEW
$17.95
$13.95 CUMMINS
Oil
2-1/2” Receiver
with
2”
CUMMINS
Deluxe Trucker Cap
TS-FLAG
MED, LRG, XLRG: 16.95
2XLRG, 3XLRG: $19.95
Specify SIZE when ordering.
“SURE, MY TRUCK’S A HYBRID” T-Shirt
TS-HYBRID
MED, LRG, XLRG: 16.95
2XLRG 3XLRG: $19.95
Specify SIZE when ordering.
“LONG LIVE THE DIESEL TRUCK” T-Shirt
TS-LIVE
MED, LRG, XLRG: 14.95
2XLRG: $17.95
3XLRG: $19.95
Specify SIZE when ordering.
LONG LIVE THE DIESEL
TRUCK
cummins beach wash t-shirt
TS-1528267
MED, LRG, XLRG, 2XLRG & 3XLRG: $19.95
Specify
Vintage Label Beanie
CAP-1433875: $10.95 Cozy poly-fleece lining with acrylic knit exterior.
Cummins Historic Tin Tacker Sign
SIGN-1445678: $17.95
Show that your mancave is powered by Cummins with this historic tin tacker sign. Made of lightweight tin metal, this fade resistant sign is die-cut in the shape of the historic Cummins Diesel logo.
Customize with your name!
CUSTOM YEAR ESTABLISHED SIGN
SIGN-GARAGE-CUSTOM: $64.95
Select Name and Year when ordering.
Establish when you started working on your Ram Turbo Diesel truck or when your Man Cave opened for business with this custom metal sign with the Cummins logo on it. Geno’s shown for example. All signs come with “Garage” cutout at the bottom above the establish date.
Measures: 20-7/8” x 8-1/2”
TDR-GRILLE-BDG:
Identify your TDR affiliation with this
8G
USB-1508542: $10.95
Custom USB data storage, made of pvc rubber and molded into the shape of a turbo charger.
‘Cummins C’ Decal
10” × 10” DECAL
DECAL_CUMM: $9.00
6” × 6” DECAL
DECAL_SM_C: $6.00
Available in Black or White
cumminS FLEETGUARD 20 oz. stainless steel tumbler
MUG-FLEETGUARD: $28.95
This double wall stainless steel tumbler looks like an LF16035 oil filter, but holds your favorite drink instead of oil.
Non-insulated
“STARTING
GG-TUMBSF: $16.95
“Starting Fluid” 20 oz. stainless steel tumbler with Geno’s logo on the back. Acrylic screw on lid with a slider opening.
TDR ball Cap
HIGH PROFILE
CAP-TDR: $13.95
Available in Gray and Red.
CALL TO ORDER AT 770-886-2500 OR SHOP US ONLINE AT GENOSGARAGE.COM
DIESEL REGISTER LOGO ITEMS
TURBO
TDR ball Cap
BLACK WITH GRAY FLAME CAP-TDR-FLAME-87478: $14.95
2” TDR Grille Badge
$17.50
grille badge.
SIZE when ordering.
RAM GRILLE FLAG BLUE T-Shirt
butter Beanie
CAP-1528368: $14.95 Soft 100% acrylic.
sherpa Beanie
CAP-1528371: $17.95 Warming folded sherpa cuff with acrylic crown.
HOLSET TURBO USB
FLUID” tumbler
