NORDIC
NORDIC
CROSS COUNTRY STRUCTURE TOOLS
Hand made structure tools are used more and more. The advantage is that you can adjust good skis with fine and medium stone grinded structures to warmer conditions. This means fewer skis to travel around with.
T048P-C10R
T048P-C15L
T048P-00
T048P-L1005
T047G-L02
Scrape the glide wax, brush and lastly set the structure. Most hand set structures will disappear after rewaxing with iron.
T047G-V05
T047G-L07505
T047G-L1005
T047G-L2005
T047G-V03
T047G-V075
T048P-L07505
T048P-C10L
T048P-C15R T047G-V10 T048P STRUCTURE TOOL WITH 4 ROLLERS A high-end structure tool developed with an ergonomic “Ferrari” design. The body is made of quality aluminum, anodized for long time use and great durability. It is a tool with two imprint rollers running in the speed direction. The tool comes with 4 rollers to be inserted for selected structure combinations. The kit comes in a solid plastic case with foam inside.
Snow condition 0°C to -18°C (32°F to 0°F) New snow Fine grained Glazed tracks
0°C to -10°C (32°F to 14°F) Coarse, old snow Artificial snow
+1°C to +15°C (34°F to 59°F) Wet coarse snow
Linear
Linear broken V
Screw
Linear
Linear broken V
T0401 - 0.25 mm T0401 - 0.5 mm T0401 - 2 mm U T0423 - 0.75 mm T047G - 0.2 mm T047G - 0.75 mm
T0423 - 0.3 mm T047G - 0.3 mm
T048P 1 mm left + 1 mm right
T0401 - 0.25 mm T0401 - 0.5 mm T0401 - 2 mm U T0423 - 0.75 mm T047G - 0.2 mm T047G - 0.75 mm
T0423 - 0.3 mm T047G - 0.3 mm
T0401 - 1 mm U T0401 - 2 mm U T0423 - 0.75 mm T0423 - 1.0 mm T047G - 0.75 mm T047G - 1.0 mm T047G - 2.0 mm
T0423 - 0.3 mm T0423 - 0.5 mm T047G - 0.3 mm T047G - 0.5 mm
T0423 - 0.75 mm T0423 - 1.0 mm T047G - 0.75 mm T047G - 1.0 mm
ADDITIONAL ROLLERS: T048P-L07505 Linear Structure, 0.75 mm pitch x 0.5 mm depth T048P-C10L Left Cross Thread, 1.0 mm T048P-C15R Right cross Thread, 1.5 mm
T048P 1 mm left + 1 mm right T048P 1 mm left + 1.5 mm right
T048P 1 mm left + 1 mm right T048P 1 mm left + 1.5 mm right T048P - 1.5 mm left + 1.5 mm right
T0401 - 1 mm U T0423 - 0.75 mm T0423 - 1.0 mm T047G - 0.75 mm T047G - 1.0 mm
T0423 - 0.3 mm T0423 - 0.5 mm T047G - 0.3 mm T047G - 0.5 mm
T0401U SWIX SUPER RILLER LINEAR The first commercial rilling tool on the market and still popular. When warmer than -2°C, the 0.75 mm or 1 mm structure steel is used. Gives a major improvement. Blisterpacked. Ea. T0401XF 0.25 mm extra fine insert structure steel.
T0401 - 1 mm U T0401 - 2 mm U T0423 - 1.0 mm T047G - 1.0 mm T047G - 2.0 mm
T0423 - 0.75 mm T0423 - 1.0 mm T047G - 0.75 mm T047G - 1.0 mm
T0401F 0.5 mm fine insert structure steel. T0401M 0.75 mm medium insert structure steel. T0401-1U 1 mm coarse insert structure steel (standard). T0401-2U 2 mm coarse insert structure steel.
56 / SWIX HARDGOODS 19/20
T047G STRUCTURE TOOL WITH 5 ROLLERS A high-end structure tool developed with geared functionality. The body is made of quality aluminum, anodized for long time use and great durability. The geared functionality allows chevron structure patterns and a longer lasting imprint than the T048P. The tool comes with 5 rollers to cover typical structure needs throughout the temperature scale. The kit comes in a solid plastic case with foam inside.
Included structure rollers are: Linear Structure, 0.2 mm. T047G-L02 Broken V Structure, 0.5 mm. T047G-V05 Linear Structure, 0.75 mm pitch x 0.5 mm depth. T047G-L07505 T047G-L1005 Linear Structure, 1.0 mm pitch x 0.5 mm depth. T047G-L2005 Linear Structure, 2.0 mm pitch x 0.5 mm depth ADDITIONAL ROLLERS: T047G-V03 Broken V Structure, 0.3 mm T047G-V075 Broken V Structure, 0.75 mm T047G-V10 Broken V Structure, 1.0 mm
SKATING
CLASSSIC
T0401 - 1 mm U T0401 - 2 mm U T0423 - 0.75 mm T0423 - 1.0 mm T047G - 0.75 mm T047G - 1.0 mm
Included structure rollers are: Right cross Thread, 1.0 mm T048P-C10R Left Cross Thread, 1.5 mm T048P-C15L Smooth Blank T048P-00 T048P-L1005 Linear Structure, 1.0 mm pitch x 0.5 mm depth
T0423S1 STRUCTURE KIT WITH THREE ROLLERS • T0423030V, 0.3 mm for very cold snow. • T0423050V, 0.5 mm for cold snow (standard). • T0423100V, 1.00 mm for wet snow.
T0423 STRUCTURE ROLLER TOOL An economic and practical alternative to handmilled specialty tools. Delivered with ballbearings for easier rolling. Strong and stable body. White arrow to show correct moving direction. Delivered with standard broken 0.5 mm V-roller. Structure imprint will disappear after rewaxing with iron. For junior racers and Loppet racers. It is simple to change the roller and the following rollers are available:
BROKEN STRUCTURE: T0423030V 0.3 mm broken structure roller. T0423050V 0.5 mm broken structure roller. T0423075V 0.75 mm broken structure roller. T0423100V 1.0 mm broken structure roller. LINEAR STRUCTURE: T0423075G 0.75 mm linear structure roller. T0423100G 1.0 mm linear structure roller.
SWIX HARDGOODS 19/20 / 57