B BAL ALLL B BEEAR ARIN ING G TRAV AVEL ELLE LER R SYSTEMS
Series 19
RC11930
RC11932
2 x M6 thread
RC51930
RC00451 RC00452 RC00453
RC51940
Low profile, lightweight alloy cars and end caps. Twin rows of recirculating Torlon® ball bearings allow smooth adjustment of sheet lead position under load.
The Sliderod car is a simple option for a sheet lead that does not require adjustment under load, and has a plunger stop for precise and repeatable positioning.
Genoa cars pivot to 45° from vertical for optimum alignment with sheet load.
Extra control line purchase can easily be added using the block addition kit (supplied with mounting screws).
Genoa car sheaves are of either 40mm (1 9/16”) or 50mm (2”) diameter. They are wide enough to accept two sheets for easy headsail changes.
Adjustable stops can be fitted on track aft of genoa cars and used to relieve load on adjustment tackle.
PRODUCT No. Ball Bearing RC00410 RC11930 RC11932 Sliderod RC00451 RC00452 RC00453 RC51930 RC51940
96
RC00410
DESCRIPTION
LENGTH WIDTH M.W.L. mm mm kg
B.L. WEIGHT kg g
LENGTH WIDTH M.W.L. in. in. lb
B.L. WEIGHT lb oz
Control sheave addition kit, suits RC11932 Genoa car, control beckets Genoa car, single control sheave, becket return
39 100 148
30 47 47
165 605 825
675 1430 2000
33 250 365
1 9/16 1 3/16 3 15/16 1 7/8 5 7/8 1 7/8
360 1330 1820
1490 3150 4410
1.2 8.8 12.9
Sliderods, suits 82mm car (pair) Sliderods, suits RC11983 (pair) Sliderods, suits 57mm car (pair) Genoa car, sliderods, plunger stop Car, sliderods, pivoting shackle top & plunger stop
72 45 37 82 55
5 5 5 39 39
660 310
1430 1050
6 4 3 235 100
2 13/16 3/16 1 3/4 3/16 1 7/16 3/16 3 1/4 1 9/16 2 3/16 1 9/16
1460 680
3150 2310
0.2 0.1 0.1 8.3 3.5
www.ronstan.com