534
Vipan Kumar & Ramneek Sharma
Figure 18 Sample Brinell Hardness
Figure 19: Bar Chart Hardness Tensile Testing Tensile test is done in the UTM universal testing machine. The result shows a tensile test in table 10. Table 11shows comparing material properties taken from table 1. Sample shown in figure 20 after the test and figure 21 is formed by UTM MACHINE. Table 10: Tensile Test Result S. No 1 2 3 3 4 5 6 7 8 9
Properties Ultimate tensile load (KN) Ultimate tensile strength (MPa) Displacement at Ult. Load (mm) Maximum displacement (mm) Percentage elongation (%) Percentage reduction area (%) Breaking load Breaking stress Yield load Yield stress
AL+2%Zro2 6.040 53.405 4.300 5.200 6.000 43.750 3.080 27.233 0.000 0.000
AL+5%SIC 5.040 44.563 5.400 6.100 6.100 2.760 24.404 0.000 0.000
AL+5%ZrO2 6.000 53.053 2.400 4.400 2.000 30.556 4.040 35.729 4.240 0.037
AL+2%SIC 3.520 31.124 4.000 4.300 8.000 15.972 2.440 21.574 2.320 0.021
Table 11: Comparing Material Properties S. No 1 2 3 4 5
Impact Factor (JCC): 7.6197
Sample AL7075 EN19 AL6061T6 AA5454 AA5182
Tensile Load 5.220 220.600 5.320 5.326 4.200
Tensile Strength 50.887 1110 50.034 260 31.952
SCOPUS Indexed Journal
Elongation 7-8 68.550 7.8 14 4
NAAS Rating: 3.11