Titus Tekform Technical Catalogue 2nd Edition by Titus Tekform

Important Information

Technical information While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confirm the up to date specification before ordering. Due to constant improvement of products presented in the catalogue, we can make changes at any time and without notice. Responsibility It is the responsibility of the user to ensure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives. Intellectual property Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual copyright, designs, illustrations, drawings and the â&#x20AC;&#x2DC;know-howâ&#x20AC;&#x2122; contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law. *Non-preferred articles All Item numbers in the catalogue marked with * are for non-preferred items available on extended delivery times. Trademarks Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Titus d.o.o. Dekani, WoodWelding is a registered trademark of WW SA.

Contents

Drawers & Runners

1 Hinges & Dampers

2 Furniture Fittings

3 Fasteners

4 General Hardware

5 Edgebanding

- Product Guide - Tekform Slimline Double Wall Drawer - Tekform Double Wall Drawer - Tekform Single Wall Drawer - Drawer Runners - BOM Codes

1.2

- Product Guide - Titus T-type Concealed Hinge - Titus S-type Concealed Hinge - Titus B-type Concealed Hinge - General Hinges - Hinge Accessories - Titus Soft Close Damping Systems

2.2

- Product Guide - Overhead Solutions - Titus Connectors - Adjustable Cabinet Legs - Furniture Legs - Fastmount Concealed Panel Mounting

3.2

- Product Guide - Screws - Brad Nails - Staples - Accessories

4.2

- Product Guide - Cabinet Hardware - Furniture Locks - General Hardware & Tools - Safety Materials

5.2

- Product Guide - OptiBoard Edgeband - ABS Edgeband - PVC Edgeband - Melamine Edgeband

6.2

1.4 1.44 1.80 1.92 1.96

2.24 2.48 2.64 2.66 2.68 2.72

3.4 3.17 3.57 3.61 3.64

4.4 4.13 4.15 4.16

5.4 5.20 5.24 5.33

6.3 6.7 6.8 6.9

Abrasives & Adhesives

7 Cabinet Handles

8 Innerware & Wardrobe

9 LED Lighting

10 Sinkware & Appliances

11 Doors, Panels & Surfaces

- Product Guide - Abrasives - Adhesives

7.2

- Product Guide - Bow Handles - Profile Handles - Provincial Handles - Recessed Handles - Square Handles - Stainless Steel Handles - Knobs

8.2

- Product Guide - Kitchen Innerware - Laundry Innerware - Wardrobe Hanging Rail - Sliding Door Tracks - Drawer Inserts - Waste Bins

9.2

- Product Guide - LED Downlights - LED Strip Lights - LED Profiles - Sensors - Lighting Panels and Controllers - LED DIY & Accessories

10.2

7.4 7.8

8.4 8.15 8.23 8.26 8.27 8.43 8.45

9.4 9.20 9.22 9.23 9.37 9.45

10.6 10.10 10.20 10.31 10.37 10.40

- Product Guide - Sinkware - Tapware - Kitchen Appliances - Laundry Appliances - Ducting

11.2

- Product Guide - Stefano Orlati Opti Board - Stefano Orlati Solid Surfaces - Duraform Vinyl Wrapped Doors - Alifrost Aluminium Doors - Belle Roller Doors

12.2

11.4 11.23 11.30 11.63 11.65

12.3 12.8 12.11 12.21 12.28

Titus Tekform

Part of the Titus Group

65+ years of experience

Leading innovation

Global player

The Titus Group has been involved in the development and manufacture of furniture fittings and precision component solutions since 1953.

Titus innovations include pioneering the Quickfit Toolless Dowel Insertion technology and the innovative Hi-Lo screws and Titus proprietary dampers.

Worldwide engineering, manufacturing and distribution capabilities combined with local service and product expertise.

0.6

Titus Tekform Pty. Ltd. is a proud member of the Titus Group of companies that sources, manufactures and markets innovative small component solutions to improve your competitiveness.

Pr od

n ch Te

uc tD

es ign

ing tur fac

nu Ma gie

olo

Precision Components

of consistent quality

Manufacturing Operations

Totally integrated engineering · Consistent and repeatable product quality · In-house manufacturing for continuous improvement · Unique product advantages

Fit for purpose innovations

Quality and reliability

· ·

New and advanced features to improve value for money and lower ‘total install cost’ CAF - Consumer Assembly Friendliness for faster assembly and increased customer satisfaction

Integrated quality system for management of design, manufacturing and service activities in compliance with ISO 9001 European quality certifications including CATAS, FIRA and more

0.7

Titus Tekform Information

Business Philosophies & Principles Our Vision

To be the supplier of choice to the Australasian kitchen manufacturing, cabinet making and shop-fitting industries.

We aim to gain total knowledge of our customers and their markets to ensure we meet our customerâ&#x20AC;&#x2122;s expectations with global consistency.

Our Mission

To provide customers with solutions that improve their competitiveness, through innovative product features, faster assembly times and better value for money.

We invest in the abilities of individuals at every level to continuously enhance input efficiency and sustainability.

Our Service Guarantee We offer fit-for-purpose solutions to improve your experience, from design to build to application. Our helpful and knowledgeable staff will give you industry-leading expertise and service in all your kitchen, bathroom, wardrobe, shop-fitting, cabinet-making or commercial hardware needs.

Our customer promise is innovation, technical expertise and reliability as we endeavour to exceed our customer expectations by providing quality products at a competitive price.

t en Measurem s si and Analy

ation Alloc e t c ur roduc so nd P ement a rov p m

er stom Cu gement ga En

Product Realisation

Titus Technologies Proven Quality and Reliability

0.8

The Titus Group designs and engineers leading techonologies for tooling, assembly and high volume manufacturing.

Titus Technologies are utilised by some of the most trusted brands in the automotive, white goods, OEM and medical industries.

Our Brands Our carefully selected product range includes superior Titus hinges, dampers and furniture fittings; the extensive Tekform Double Wall and Single Wall drawer family; Stefano Orlati lighting,

handles and decorative surfaces; as well as a comprehensive array of innerware, sinks, taps, appliances, adhesives, abrasives, fasteners, and edgebanding.

Engineered fittings and precision components

Functional fittings and cabinetry solutions

Decorative hardware, surfaces and LED lighting

0.9

0.1

Tekform Slimline Drawer

Drawers & Runners

0.2

Tekform Slimline Drawer Product Guide

Tekform Slimline Drawer Page

Tekform Slimline Drawer SDW70

1.12

Tekform Slimline Drawer SDW70 with Glass

1.20

Tekform Slimline Drawer SDW100

1.14

Tekform Slimline Drawer SDW145

1.16

Tekform Slimline Drawer SDW145 with Glass

1.22

Tekform Slimline Drawer SDW182

1.18

Tekform Slimline Drawer SDW182 with Glass

1.24

1.2

Inner Slimline Drawer Fronts Inner Drawer Front for Tekform Slimline Drawer SDW70

1.26

Inner Drawer Front for Tekform Slimline Drawer SDW70 with Glass

1.28

Inner Drawer Front for Tekform Slimline Drawer SDW145 with Bar

1.30

Inner Drawer Front for Tekform Slimline Drawer SDW145 with Glass

1.32

Inner Drawer Front for Tekform Slimline Drawer SDW182 with Bar

1.34

Inner Drawer Front for Tekform Slimline Drawer SDW182 with Glass

1.36

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.3

Tekform Slimline Drawer

Narrow sides · Sleek look with 14mm thickness · Efficient utilisation of drawer space

1.4

‘EasyFix’ front panel connector · Hand insertion · Quarter turn lock · Repeatable assembly and disassembly possible

Flexibility of runner system · Same drilling specification as Tekform Double Wall Drawer · Same machinery settings as Tekform Double Wall Drawer

Tekform Slimline Drawer

Expanded tolerances

Integrated Titus damper

Quality certified

· Precise drawer alignment · Smooth and silent operation · Improved drawer stability in open position · +/- 1mm tolerance on bottom panel width size

· Life-long consistent soft closing performance at various closing speeds · ‘ConfidentClose’ - fast closing, late start deceleration action, quiet landing · Low pull-out force

· By European specialised institutions

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.5

Tekform Slimline Drawer Information

Technical Guide How to choose the appropriate drawer dimension?

Select the drawer size based on available cabinet space. Please refer to the below chart with indicated minimum space

required in cabinet to assist in choosing the appropriate drawer system.

Tekform Drawer nominal length (NL) in mm NL

270

300

Tekform Slimline Drawer SDW70 Tekform Slimline Drawer SDW100 Tekform Slimline Drawer SDW145 Tekform Slimline Drawer SDW182

350

400

450

500

550

Tekform Drawer

Tekform Drawer with Inner Front

Min. height (H) required

Cabinet depth (D)

Min. height (H) required

Cabinet depth (D)

115mm

NL+min 3mm

115mm

NL+min 12mm

147mm

NL+min 3mm

198mm

NL+min 3mm

198mm

NL+min 12mm

230mm

NL+min 3mm

230mm

NL+min 12mm

How to fix drawer sides to the front panel?

‘EasyFix’ front connector

Screw-in front connector

The Tekform Drawer is available with ‘EasyFix’ or screw-in front connectors. 32

min. 48

· Hand insertion 9 20 · Quarter turn locking system 32 · Expandable plastic dowel 110 · Easy assembly and disassembly min. min. 49 33 of front panel

· Reliable connection · Fixing with Ø 3.5x15mm screw (screws are not included) 32 min. 48

15.5

1.6

Front connector

ø8 +/-0.1x11

90º

Front connector

Tekform Slimline Drawer

Bottom panel and back panel cutting dimensions

Dimensions of bottom and back panel depend on:

· Cabinet width 3 · Nominal drawer length · Drawer height

Front 2 connector

Tekform Drawer nominal length (NL) in mm NL

270

300

350

400

450

500

550

B Back panel

A Bottom panel

Cabinet width

Decorative cover

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

Front connector

ICW ECW

Back panel cutting dimensions

Back panel height depends on the B selected drawer height.

Back panel

A Bottom panel

SDW100

100

SDW145

151

SDW182

183

A Bottom panel

ICW - 87 +/-0.5

H back panel SDW70

B Back panel

ICW - 87 +/-0.5

ICW - 75 +/-0.5

ICW - 87 +/-0.5

ICW - 75

+/-0.5

ICW - 75

Bottom panel cutting ICW dimensions ECW

ICW ECW NL

Decorative cover

+/-0.5

270

300

350

400

450

500

550

260

290

340

390

440

490

540

NL= Tekform Drawer nominal length (in mm) 15.5

1.7

Download supporting documentation from the Titus Tekform website titustekform.com.au 32

Tekform Slimline Drawer Information

Technical Guide How to choose the appropriate drawer runner fixing positions?

Drawer fixing positions depend on the chosen drawer front type.

Tekform Slimline Drawer with standard front

When a standard drawer front is applied, use the third hole on the drawer runner for fixing.

Tekform Slimline Drawer with inner front

When an inner drawer front is applied, use the second hole on the drawer runner for fixing.

Front side

Front conne 192

192

Load capacity

Drawer load capacity is 40kg.

192

40kg 192

A Bottom panel

Expanded tolerances

Tekform drawers provide expanded tolerances in cabinet construction and assure: 路 Precise drawer alignment 路 Smooth and silent operation 路 Improved drawer stability in open position 路 The Tekform Drawer provides tolerance of +/-1mm on bottom panel width size ICW ECW

1.8

B Back panel

B ICW - 87 +/-0.5

192

ICW - 75

L 224

+/-0.5

bottom panel width 224 tolerance +/- 1mm

Tekform Slimline Drawer

Adjustment needs to be done on both sides of the drawer

Adjustments Side adjusment

Side adjustment is done via the adjustment screw on the drawer side. Tighten the screw to adjust.

+/- 1mm

Height adjustment

Height adjustment is done via the cam. First, release the locking screw and tighten it back after the front is adjusted.

+/- 2mm

Release

Adjust

Tighten

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.9

Key Design Choices 'ConfidentClose'

Fast closing

Late start of deceleration action

Quiet landing

CAF Consumer Assembly Friendliness

‘EasyFix’ front panel connector with expandable plastic dowel provides: · Quick, tool-free insertion · Quarter turn lock · Repeatable assembly and disassembly

Front connector

90º

1.10

Designed and produced in-house. · Reliable and consistent life-long damping · Smooth closing · Dampers’ consistency over high volume production runs assured · 100% automated quality check

Damping action

Even and smooth soft closing action. · Soft and reliable closing

Tekform Slimline Drawer

Titus hydraulic damper

Damping force

Stroke Flat damping curve shows the uniform action produced during damper closing at a defined speed.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.11

Item number for a set

270

655.8T27

655.8E27

150.00 185.00

Decorative cover

300*

655.8T30

655.8E30

150.00 185.00

Rear connector

350

655.8T35

655.8E35

Front connector

150.00 185.00

Drawer side

400

655.8T40

655.8E40

150.00 185.00

450

655.8T45

655.8E45

150.00 185.00

Drawer runner

500

655.8T50

655.8E50

150.00 185.00

550

655.8T55

655.8E55

150.00 185.00

One set consists of

Cutting dimensions details B Back panel

A Bottom panel

ICW ECW

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer A B A

Drawer sides

2 pcs

Drawer runners

2 pcs

^Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

L ICW - 87 +/-0.5

2 pcs

ICW - 87 +/-0.5 ICW - 75

Anthracite grey

with Screw-in front connector

Nominal length (mm)

with EasyFix front connector

White

Tekform Slimline Drawer SDW70

+/-0.5

L=NL-10 For further explanation > see page 1.7

Mounting instructions

1 pce

ICW - 75 +/-0.5

Screws not included. ^Front connectors determined by order code.

1.12

Drawer Front Marking Jig for Tekform Slimline SDW70 655.8016

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

Full extension 40kg 115mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 1.9

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ø3.5 x 15

min. 115

Euroscrew Ø6.3 x 13

NL+3

min. 115

NL+3

NL=270 mm

192 192

NL=300 mm

192 192

Drilling dimensions for the front panel NL+3 Screw-in attachment

EasyFix attachment

ø8 +/-0.1x11

ø8 +/-0.1x11 min. 48

min. 48

32 ø8

min. 48

ø8 +/-0.1x11

x11

+/-0.1

min. 48

NL=350 mm

192 192

NL=400 mm

192 192

NL=450 mm

192 192

9 20dimensions for the back panel Mounting 110

32 9

min. min. 49 33

20 110

9 20

32 min. min. 49 33

110

min. min. 49 33

Installation dimensions for the front panel 32

NL=500 mm

224 224

NL=550 mm

224 224

min. 48 32 15.5 min. 48

15.5

min. min. 48 A trial mounting is always recommended. For further information please 48contact Titus Tekform.

Download supporting documentation from the Titus Tekform website titustekform.com.au 15.5

15.5

1.13

Tekform Slimline Drawer

· · · · ·

Item number for a set

270

655.8U27

655.8F27

150.00 185.00

300*

655.8U30

655.8F30

150.00 185.00

350

655.8U35

655.8F35

150.00 185.00

400

655.8U40

655.8F40

150.00 185.00

Drawer side

450

655.8U45

655.8F45

150.00 185.00

Drawer runner

500

655.8U50

655.8F50

150.00 185.00

550

655.8U55

655.8F55

150.00 185.00

Decorative cover Rear connector

Front connector

One set consists of

Cutting dimensions details B Back panel

A Bottom panel

Anthracite grey

with Screw-in front connector

Nominal length (mm)

with EasyFix front connector

White

Tekform Slimline Drawer SDW100

ICW ECW

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

Drawer sides

2 pcs

Drawer runners

2 pcs

^Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

A B

A L

ICW - 87B+/-0.5

100 100

2 pcs

L ICW - 87 +/-0.5 ICW - 75 +/-0.5

L=NL-10 For further explanation > see page 1.7

Mounting instructions

1 pce

ICW - 75 +/-0.5

Screws not included. ^Front connectors determined by order code.

1.14

Drawer Front Marking Jig for Tekform Slimline SDW100 655.8017

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

Full extension 40kg 147mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 1.9

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

Euroscrew Ø6.3 x 13

NL+3 NL+3

min. 147

NL+3

Chipboard screw Ø3.5 x 15

min. 147

NL=270 mm

192 192

NL=300 mm

192 192

NL+3 Drilling dimensions for the front panel NL+3

EasyFix attachment

Screw-in attachment

ø8 +/-0.1x11

ø8 +/-0.1x11 32 min. 48

32 32

min. 48

32 ø8

32 32

min. 48

ø8 +/-0.1x11

min. 48

x11

+/-0.1

ø8 +/-0.1x11

min. 48

32 32

min. 48

NL=350min. mm

192 192

NL=400 mm

192 192

NL=450 mm

192 192

9 17 32 Mounting dimensions for the back panel 142

9 142

142

min. min. 49 33

9 17 min. min. 49 33

min. min. 49 33

142 min.

min. 49 Installation dimensions for32the front panel 33

min. min. 49 33 NL=500

224 224

NL=550 mm

224 224

min. 48

15.5

min. 48

15.5

A trial mounting is always recommended. For further information please contact Titus Tekform. 32

Download supporting documentation from the Titus Tekform website titustekform.com.au 32

1.15

Tekform Slimline Drawer

· · · · ·

Item number for a set

Decorative cover

270

655.8V27

655.8G27

150.00 185.00

Front connector

Rear connector

300*

655.8V30

655.8G30

150.00 185.00

350

655.8V35

655.8G35

150.00 185.00

Drawer side

400

655.8V40

655.8G40

150.00 185.00

450

655.8V45

655.8G45

150.00 185.00

Drawer runner

500

655.8V50

655.8G50

150.00 185.00

550

655.8V55

655.8G55

150.00 185.00

One set consists of

Cutting dimensions details

A Bottom panel

Anthracite grey

with Screw-in front connector

Nominal length (mm)

with EasyFix front connector

White

Tekform Slimline Drawer SDW145

B Back panel

ICW ECW

Drawer sides

2 pcs

Drawer runners

2 pcs

^Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

A A

151

L L

ICW - 87

151

+/-0.5

ICW - 87 +/-0.5 ICW - 75 +/-0.5 ICW - 75

+/-0.5

L=NL-10 For further explanation > see page 1.7

Screws not included. ^Front connectors determined by order code.

1.16

2 pcs Mounting instructions

1 pce

Drawer Front Marking Jig for Tekform Slimline SDW145 655.8018

Installation dimensions

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ø3.5 x 15

min. 198

Euroscrew Ø6.3 x 13

NL+3

Drilling dimensions for the front panel NL+3 EasyFix attachment

ø8 +/-0.1x11

min. 48

64 32

min. 48

NL=300 mm 32

min. 48

ø8 +/-0.1x11

x11

+/-0.1

192 192

64ø8

NL=270 mm

Screw-in attachment

ø8 +/-0.1x11

min. 48

32 min.

min. 48

192 192

48 NL=350 mm

192 192

NL=400 mm

192 192

NL=450 mm

192 192

Mounting dimensions for the back panel 32 193

32 39

193

32 32193

min. min.49 33

32 32 min. min.49 33

Full extension 40kg 198mm 16mm 16mm

For further explanation > see page 1.9

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

32 min. min.49 33

193

32 32

32 Installation dimensions for the front panel

min. min.49 33

min. 49

min. NL=500 mm 33

224 224

NL=550 mm

224 224

32 min. 48

64 15.5

32 min. 48

15.5

A trial mounting is always recommended. For further information please contact Titus Tekform. 64

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.17

Tekform Slimline Drawer

· · · · ·

Item number for a set

Decorative cover

270

655.8Z27

655.8H27

150.00 185.00

Front connector

Rear connector

300*

655.8Z30

655.8H30

150.00 185.00

350

655.8Z35

655.8H35

150.00 185.00

400

655.8Z40

655.8H40

150.00 185.00

Drawer side

450

655.8Z45

655.8H45

150.00 185.00

500

655.8Z50

655.8H50

150.00 185.00

Drawer runner

550

655.8Z55

655.8H55

150.00 185.00

One set consists of

Cutting dimensions details A Bottom panel

Anthracite grey

with Screw-in front connector

Nominal length (mm)

with EasyFix front connector

White

Tekform Slimline Drawer SDW182

B Back panel

ICW ECW

Drawer sides

2 pcs

Drawer runners

2 pcs

^Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer A A

B L

183

L ICW - 87 +/-0.5

2 pcs

ICW - 87 +/-0.5 ICW - 75 +/-0.5 ICW - 75

L=NL-10 For further explanation > see page 1.7

+/-0.5

Screws not included. ^Front connectors determined by order code.

1.18

Mounting instructions

1 pce

Drawer Front Marking Jig for Tekform Slimline SDW182 655.8018

8 2

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 1.9

Installation dimensions

min. 230

Drawer runner fixing positions

Chipboard screw Ø3.5 x 15

min. 230

Minimum space required for the cabinet 37

Euroscrew Ø6.3 x 13

NL+3

NL+3 NL+3

NL=270 mm

NL+3 for NL+3 Drilling dimensions the front panel

ø8 +/-0.1x11

ø8 +/-0.1x11 32

32 64

min. 48

64 32 min. 48

min. 48

32 NL=300 mm

ø8 +/-0.1x11 32

ø8 +/-0.1x11

min. 48

ø8 +/-0.1x11

192 192

Screw-in attachment

EasyFix attachment

min. 48

192 192

min.

min. 48

48 NL=350 mm

192 192

NL=400 mm

192 192

NL=450 mm

192 192

Mounting dimensions for the back panel 8 32

9 64 225 32 32

8 32

98 32

8 32

64 225 32 225 32

32 min. min. 49 33

Full extension 40kg 230mm 16mm 16mm

min. min. 49 33

225 32 32

Installation dimensions for the front panel min. min. 49 33

min. min. 49 33

NL=500 mm

224 224

NL=550 mm

224 224

min. 48

15.5

min. 48

15.5

A trial mounting is always recommended. For further information please contact Titus Tekform. 64

Download supporting documentation from the Titus Tekform website titustekform.com.au 32

32 min.

1.19

Tekform Slimline Drawer

· · · · ·

Tekform Slimline Drawer SDW70 With Glass

• • •

270

655.7P27

152.00* 187.00*

350

655.7P35

152.00* 187.00*

400

655.7P40

152.00 187.00*

450

655.7P45

152.00 187.00*

500

655.7P50

152.00 187.00*

550

655.7P55

152.00* 187.00*

Anthracite grey

Item number for a set

White

with EasyFix front connector

Nominal length (mm)

8mm tempered glass sides Interchangeable with the Tekform Double Wall Drawer and Tekform Slimline Drawer Titus damper inside

One set consists of

Cutting dimensions details

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer A B A

Drawer sides

2 pcs

Drawer runners

2 pcs

Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

L ICW - 87 +/-0.5

L ICW - 87 ICW - 75

+/-0.5

ICW - 75 +/-0.5

1.20

L=NL-10

2 pcs

+/-0.5

Mounting instructions

1 pce

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

Full extension 40kg 115mm 16mm 16mm

Installation dimensions

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ø3.5 x 15

min. 115

Euroscrew Ø6.3 x 13

NL+3

min. 115

NL+3

NL=270 mm

192 192

NL=300 mm

192 192

Drilling dimensions for the front panel NL+3 Screw-in attachment

EasyFix attachment

ø8 +/-0.1x11

ø8 +/-0.1x11 min. 48

min. 48

32 ø8

min. 48

ø8 +/-0.1x11

x11

+/-0.1

min. 48

NL=350 mm

192 192

NL=400 mm

192 192

NL=450 mm

192 192

9 20dimensions for the back panel Mounting 110

32 9

min. min. 49 33

20 110

9 20

32 min. min. 49 33

110

min. min. 49 33

Installation dimensions for the front panel 32

NL=500 mm

224 224

NL=550 mm

224 224

min. 48 32 15.5 min. 48

15.5

min. 48

Download supporting documentation from the Titus Tekform website titustekform.com.au 15.5

15.5

1.21

Tekform Slimline Drawer

· · · · ·

Tekform Slimline Drawer SDW145 With Glass

• • •

270

655.7S27

152.00* 187.00*

350

655.7S35

152.00* 187.00*

400

655.7S40

152.00 187.00*

450

655.7S45

152.00 187.00*

500

655.7S50

152.00 187.00*

550

655.7S55

152.00* 187.00*

Anthracite grey

Item number for a set

White

with EasyFix front connector

Nominal length (mm)

8mm tempered glass sides Interchangeable with the Tekform Double Wall Drawer and Tekform Slimline Drawer Titus damper inside

One set consists of

Cutting dimensions details

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

Drawer sides

2 pcs

Drawer runners

2 pcs

Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

A A

B L

ICW - 75 +/-0.5 ICW - 75 +/-0.5

1.22

151

ICW - 87 +/-0.5 ICW - 87 +/-0.5

L=NL-10

2 pcs Mounting instructions

1 pce

Side adjustment +1/-1mm

37 Chipboard screw Ø3.5 x 15

min. 198

Euroscrew Ø6.3 x 13

NL+3

Drilling dimensions for the front panel NL+3 EasyFix attachment

64ø8

ø8 +/-0.1x11

min. 48

64 32

min. 48

NL=300 mm 32

min. 48

ø8 +/-0.1x11

x11

+/-0.1

NL=270 mm

Screw-in attachment

ø8 +/-0.1x11

Height adjustment +2/-2mm

Drawer runner fixing positions

Minimum space required for the cabinet

min. 48

32 min.

min. 48

48 NL=350 mm

Mounting dimensions for the back panel 32 193

NL=400 mm

32 39

193

32 32193

min. min.49 33

32 32 min. min.49 33

Full extension 40kg 198mm 16mm 16mm

Installation dimensions

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

32 min. min.49 33

193

NL=450 mm

32 32 Installation dimensions for the front panel

min. min.49 33

min. 49

min. NL=500 mm 33

32 min. 48

64 15.5

NL=550 mm

min. 48

15.5

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.23

Tekform Slimline Drawer

· · · · ·

Tekform Slimline Drawer SDW182 With Glass

• • •

270

655.7T27

152.00* 187.00*

350

655.7T35

152.00* 187.00*

400

655.7T40

152.00 187.00*

450

655.7T45

152.00 187.00*

500

655.7T50

152.00 187.00*

550

655.7T55

152.00* 187.00*

Anthracite grey

Item number for a set

White

with EasyFix front connector

Nominal length (mm)

8mm tempered glass sides Interchangeable with the Tekform Double Wall Drawer and Tekform Slimline Drawer Titus damper inside

One set consists of

Cutting dimensions details

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

Drawer sides

2 pcs

Drawer runners

2 pcs

Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

183

L ICW ICW - 87

ICW - 75 +/-0.5

1.24

L=NL-10

2 pcs

+/-0.5 +/-0.5 87

Mounting instructions

1 pce

8 2

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

min. 230

Height adjustment +2/-2mm

Drawer runner fixing positions

Chipboard screw Ø3.5 x 15

min. 230

Minimum space required for the cabinet 37

Euroscrew Ø6.3 x 13

NL+3

NL+3 NL+3

NL=270 mm

NL+3 for NL+3 Drilling dimensions the front panel

Screw-in attachment

EasyFix attachment

ø8 +/-0.1x11

ø8 +/-0.1x11 32

32 64

32 min. 48

min. 48

64 32

min. 48

32 NL=300 mm

ø8 +/-0.1x11 32

ø8 +/-0.1x11

min. 48

ø8 +/-0.1x11

min. 48

32 min.

min. 48

48 NL=350 mm

Mounting dimensions for the back panel 8 32

9 64 225 32 32

8 32

98 32

8 32

64 225 32 225 32

NL=400 mm

32 min. min. 49 33

Side adjustment +1/-1mm

Installation dimensions

Full extension 40kg 230mm 16mm 16mm

min. min. 49 33

225 32

NL=450 mm

32 Installation dimensions for the front panel min. min. 49 33

min. min. 49 33

NL=500 mm

min. 48

15.5

NL=550 mm

min. 48

15.5

Download supporting documentation from the Titus Tekform website titustekform.com.au 32

32 min.

1.25

Tekform Slimline Drawer

· · · · ·

Inner Drawer Front for Tekform Slimline Drawer SDW70

Front Panel

Item number

Anthracite grey

White

External cabinet width (mm)

Cabinet side thickness=16mm

600

655.8185

511.00

515.00

1200

655.8189

511.00

515.00

150.00

185.00

110

Cutting dimension= ICW-100 ICW > see page 1.21

Made of aluminium 655.8065 >

Front Bracket Set

Made of aluminium and plastic Front panel support clip 002110.885.300 white

1.26

Height adjustment +2/-2mm

For further explanation > see page 1.9-1.10

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ă&#x2DC;3.5 x 15

min. 115

Euroscrew Ă&#x2DC;6.3 x 13

ICW-92

NL+12

ICW-90

Use the second hole for runner fixing.

Front panel

Front bracket

NL=270 mm

NL=300 mm

min. 198

Cutting dimensions details

NL=350 mm NL+12

NL=400 mm 46

ICW ECW

min. 230

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm NL+12

NL=550 mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.27

Tekform Slimline Drawer

Side adjustment +1/-1mm

Inner Drawer Front for Tekform Slimline Drawer SDW70 with Glass

Inner Drawer Front, Assembly Set

Made of aluminium and glass Front Panel

Transparent glass

Frosted glass

Item number

Anthracite grey

White

External cabinet width (mm)

Cabinet side thickness=16mm

600

655.8285

511.00

515.00

600

655.8205

511.00

515.00

1200

655.8209

511.00

515.00

600

655.8295

391.00* 392.00

1200

655.8299

391.00* 392.00

Cutting dimension= ICW-100 ICW > see page 1.23 56

Made of aluminium Low Glass 50

Made of glass 655.8305 >

Front Bracket Set

150.00

185.00

Made of aluminium and plastic Front panel support clip 002110.885.300 white

1.28

Height adjustment +2/-2mm

For further explanation > see page 1.9-1.10

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ă&#x2DC;3.5 x 15

min. 115

Euroscrew Ă&#x2DC;6.3 x 13

ICW-92

NL+12

ICW-90

Use the second hole for runner fixing.

Front panel

Front bracket

NL=270 mm

NL=300 mm

min. 198

Cutting dimensions details

NL=350 mm NL+12

NL=400 mm 46

ICW ECW

min. 230

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm NL+12

NL=550 mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.29

Tekform Slimline Drawer

Side adjustment +1/-1mm

Inner Drawer Front for Tekform Slimline Drawer SDW145 with Bar

Inner Drawer Front, Assembly Set

Item number

Anthracite grey

White

External cabinet width (mm)

Cabinet side thickness=16mm

600

655.8190

511.00 515.00

1200

655.8194

511.00 515.00

Made of aluminium and plastic

110

Front Bar

600

655.8210

511.00 515.00

1200

655.8214

511.00 515.00

600

655.8185

511.00 515.00

1200

655.8189

511.00 515.00

Cutting dimension= ICW-88 ICW > see page 1.25

110

Made of aluminium Front Panel 110

110

Cutting dimension= ICW-100 ICW > see page 1.25

Made of aluminium 655.8101 >

Front Bracket Set

350.00 385.00

Made of aluminium and plastic Front panel support clip 002110.885.300 white

1.30

min. 115

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet Chipboard screw Ă&#x2DC;3.5 x 15

Euroscrew Ă&#x2DC;6.3 x 13

ICW-92

NL+12

Use the second hole for runner fixing.

Front panel

Front bracket

NL=270 mm

min. 230

ICW-90 46 Cutting dimensions details

NL=300 mm

NL=350 mm

NL+12

NL=400 mm

ICW ECW

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm

NL=550 mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.31

Tekform Slimline Drawer

Height adjustment +2/-2mm

For further explanation > see page 1.9-1.10

min. 198

Side adjustment +1/-1mm

Inner Drawer Front for Tekform Slimline Drawer SDW145 with Glass

Inner Drawer Front, Assembly Set

600

655.8200

511.00 515.00

600

655.8205

511.00 515.00

1200

655.8209

511.00 515.00

600

655.8220

391.00* 392.00

800*

655.8221

391.00

392.00

900*

655.8222

391.00

392.00

655.8103

Frosted glass

White

Transparent glass

Item number

Anthracite grey

External cabinet width (mm)

Cabinet side thickness=16mm

Made of aluminium and glass56 Front Panel

Cutting dimension= ICW-100 ICW > see page 1.27

56 137

Made of aluminium Front Glass Panel - High 137 137

Made of glass Front Bracket Set

350.00 385.00

Made of aluminium and plastic Front panel support clip 002110.885.300 white

1.32

Height adjustment +2/-2mm

For further explanation > see page 1.9-1.10

min. 115

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet Chipboard screw Ă&#x2DC;3.5 x 15

min. 198

Euroscrew Ă&#x2DC;6.3 x 13

ICW-92

Use the second hole for runner fixing.

Front panel

Front bracket

NL=270 mm NL+12

ICW-90 Cutting dimensions details

NL=300 mm

min. 230

137

NL=350 mm

NL+12

NL=400 mm

ICW ECW

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm

NL=550 mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.33

Tekform Slimline Drawer

Side adjustment +1/-1mm

Inner Drawer Front for Tekform Slimline Drawer SDW182 with Bar

Inner Drawer Front, Assembly Set

Item number

Anthracite grey

White

External cabinet width (mm)

Cabinet side thickness=16mm

600

655.8260

511.00

515.00

1200

655.8264

511.00

515.00

Made of aluminium and plastic

110

Front Bar

600

655.8210

511.00

515.00

1200

655.8214

511.00

515.00

600

655.8185

511.00

515.00

1200

655.8189

511.00

515.00

350.00

385.00

Cutting dimension= ICW-88 110 ICW > see page 1.29 20

Made of aluminium Front Panel 110

110

Cutting dimension= ICW-100 ICW > see page 1.29

Made of aluminium 655.8170 >

Front Bracket Set

Made of aluminium and plastic Front panel support clip 002110.885.300 white

1.34

Side adjustment +1/-1mm NL+12

Height adjustment +2/-2mm

For further explanation > see page 1.9-1.10

min. 198

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ă&#x2DC;3.5 x 15

min. 230

Euroscrew Ă&#x2DC;6.3 x 13

ICW-92

Use the second hole for runner fixing.

Front panel

Front bracket

NL=270 mm NL+12

ICW-90

NL=300 mm

Cutting dimensions details

NL=350 mm

NL=400 mm

ICW ECW

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm

NL=550 mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.35

Tekform Slimline Drawer

min. 115

Inner Drawer Front for Tekform Slimline Drawer SDW182 with Glass

600

Inner Drawer Front, Assembly Set

655.8270

Transparent glass

Frosted glass

Item number

Anthracite grey

White

External cabinet width (mm)

Cabinet side thickness=16mm

511.00 515.00

170

Made of aluminium and glass Front Panel

600

655.8205

511.00 515.00

1200

655.8209

511.00 515.00

600

655.8280

391.00* 392.00

800

655.8281

391.00* 392.00

900

655.8282

391.00* 392.00

Cutting dimension= ICW-100 ICW > see page 1.31

56 170

Made of aluminium Front Glass Panel - High

170 170

Made of glass 655.8172 >

Front Bracket Set

350.00 385.00

Made of aluminium and plastic Front panel support clip 002110.885.300 white

1.36

Side adjustment +1/-1mm NL+12

Height adjustment +2/-2mm

For further explanation > see page 1.9-1.10

min. 198

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ă&#x2DC;3.5 x 15

Euroscrew Ă&#x2DC;6.3 x 13 min. 230

ICW-92

Use the second hole for runner fixing.

Front panel

Front bracket

NL=270 mm NL+12

ICW-90

NL=300 mm

Cutting dimensions details

NL=350 mm

NL=400 mm

ICW ECW

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm

NL=550 mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.37

Tekform Slimline Drawer

min. 115

Assembly Instructions

Assembly Sequence Connect the drawer sides to the bottom panel (1) and fix it with screws (2).

Chipboard screw Ă&#x2DC;3.5 x 15

192 192

Insert the rear connector vertically (3) and push it downwards into recess in the drawer side (4).

192 4192

192 192

Insert the back panel (5) and fix it with screws (6). 224 224

224 224

1.38

192 192

Chipboard screw Ă&#x2DC;3.5 x 15

Tekform Slimline Drawer

Screws not included.

Insertion of Front Connectors EasyFix Insert the front connectors into holes on the front panel.

Front connector

Front panel

Turn the screws 90º into locked position.

90º turn

90º

Screw-in fixing Use Ø3.5 x 15mm screws for fixing.

Front connector

Chipboard screw Ø3.5 x 15 Front panel

192

Download supporting documentation from the Titus Tekform website titustekform.com.au

192

1.39

Assembly Instructions

Front Panel Mounting / Removal Mounting Attach the front panel to the drawer and press to click.

Removal Turn the screw towards the front panel.

1.40

Tekform Slimline Drawer

Screws not included.

Draw Insertion / Removal Insertion Place the drawer horizontally on the runners and push towards the cabinet until you hear the drawer is locked.

Push to fully close until drawer clicks. Pull drawer out and push to fully close again until drawer clicks twice.

Removal Press-up the button under the drawer. Keep pressed to pull the drawer out.

Press-up Download supporting documentation from the Titus Tekform website titustekform.com.au

1.41

Tekform Drawer Product Guide

Tekform Drawer Page

Tekform Drawer DW70

1.52

Tekform Drawer DW113

1.54

Tekform Drawer DW145

1.56

Tekform Drawer DW182

1.58

Inner Drawer Fronts For DW70

1.62

For DW145 with Square Bar

1.64

For DW182 with Square Bar

1.66

1.42

Accessories Glass Sides 4mm

1.68

Glass Sides 8mm

1.69

Industrial Packaging

1.60

Drawer Storage System

1.70

Assembly and Mounting

1.71

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.43

Tekform Double Wall Drawer

‘EasyFix’ front panel connector · Hand insertion · Quarter turn lock · Repeatable assembly and disassembly possible

1.44

User friendly mounting · Intuitive installation instructions · Easy assembly and disassembly of the drawer

Superior vertical and horizontal stability of rails · Smooth and silent operation · Reliable drawer opening and closing · Improved drawer stability in open position

Tekform Double Wall Drawer

Precise drawer alignment

Integrated Titus damper

Quality certified

· Tekform Drawer provides a +/- 1mm tolerance on drawer bottom width · Intuitive drawer front adjustment

· Life-long reliable closing · Consistent damping at various closing speeds · Consumer-preferred ‘ConfidentClose’

· By European specialised institutions

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.45

Tekform Drawer Information

Technical Guide How to choose the appropriate drawer dimension?

Select Tekform Drawer size based on available cabinet space. Please refer to the below chart with indicated minimum

space required in cabinet to choose appropriate drawer system.

Tekform Drawer nominal length (NL) in mm: NL

270

300

350

400

Tekform Drawer 105mm DW70 Tekform Drawer 160mm DW113 Tekform Drawer 185mm DW145 Tekform Drawer MINIMAL SPACE REQUIRED 224mm 70 standard DWD DW182

500

550

Cabinet depth (D)

Tekform Drawer with inner front Min. height (H) Cabinet required depth (D)

NL+min 3mm

115mm

NL+min 12mm

NL+min 3mm

193mm

NL+min 12mm

NL+min 3mm

224mm

NL+min 12mm 145

Tekform Drawer Min. height (H) required

450

H 105 min.

min. 185

D NL+min.3

How to fix drawer sides to the front panel?

NL+min.3

The Tekform Drawer is available with ‘EasyFix’ or screw-in front connectors. 70

Front connector

· Hand insertion NL+min.12 · Quarter turn locking system · Expandable plastic dowel · Easy assembly and disassembly of front panel

min. 193

min. 115

‘EasyFix’ front connector

NL+min.12

90º

Front connector

Screw-in front connector

1.46

· Reliable connection · Fixing with Ø 3.5x15mm screw (screws are not included)

145

Tekform Double Wall Drawer

Technical Guide Bottom panel and back panel cutting dimensions

Dimensions of bottom and back panel depends on:

· Cabinet width · Nominal drawer length · Drawer height

Decorative cover

Tekform Drawer nominal length (NL) in mm: NL

270

300

350

400

450

500

550

B Back panel

A Bottom panel

Cabinet width

Front connector

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

Decorative ICW - 87 cover Front connector

+/-0.5

ICW - 75

+/-0.5

ICW ECW

Back panel cutting dimension

Back panel height depends on the selected drawer height.

A Bottom panel

B Back H backpanel panel

DW70

DW113

119

DW145

151

DW182

B ICW - 87 +/-0.5

15.5

B 183 Back panel

min.105

B A

ICW - 75

ICW ECW

m 47

min. 33

+/-0.5

ICW - 75

ICW - 87 +/-0.5

Bottom panel cutting dimensions

ICW ECW

+/-0.5

270

300

350

400

450

500

550

260

290

340

390

440

490

540

NL= Tekform Drawer nominal length (in mm)

Download supporting documentation from the Titus Tekform website titustekform.com.au

15.5

1.47

Tekform Drawer Information

Technical Guide How to choose the appropriate drawer runner fixing positions?

Drawer fixing positions depend on the drawer front type.

Tekform Drawer with standard front

When a standard drawer front is applied, use the third hole on the drawer runner for fixing.

Front side

D c

Front side

Tekform Drawer with inner front

When an inner drawer front is applied, use the second hole on the drawer runner for fixing.

Front connecto 192

192

Load capacity

Tekform Drawer load capacity is 40kg.

192

40kg

192

A Bottom panel

Expanded tolerances

Tekform Drawer provides expanded tolerances in cabinet construction and enables: 路 Precise drawer alignment 路 Smooth and silent operation 路 Improved drawer stability in open position 路 Tolerance of +/-1mm on botton panel width size ICW ECW

1.48

B Back panel

B ICW - 87 +/-0.5

192

A 224

ICW - 75

+/-0.5

Internal cabinet width tolerance +/- 1mm 224

Tekform Double Wall Drawer

Adjustment needs to be done on both sides of the drawer.

Adjustments Side adjusment

Side adjustment is done via the adjustment screw on the drawer side. Tighten screw to adjust.

+/- 1mm

Height adjustment

Height adjustment is done via the cam. Release the locking screw and tighten it back after the front is adjusted.

+/- 2mm

Release

Adjust

Tighten

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.49

Tekform Drawer Information

Adjustment needs to be done on both sides of the drawer.

Adjustments Depth adjustment

Depth adjustment is done through the connecting bar.

Please note: connecting bars can't be used with the 8mm thick glass sides.

Bar length adjustment +/- 2mm

+/- 2mm

1.50

Tekform Double Wall Drawer

Key Design Choices 'ConfidentClose'

Fast closing

Late start of deceleration action

Quiet landing

CAF Consumer Assembly Friendliness

‘EasyFix’ front panel connector with expandable plastic dowel provides: · Quick, tool-free insertion · Quarter turn lock · Repeatable assembly and disassembly

Front connector

90º

Titus hydraulic damper

Designed and produced in-house. · Reliable and consistent life-long damping · Smooth closing · Dampers’ consistency over high volume production runs assured · 100% automated quality check

Damping action

Even and smooth soft closing action. · Soft and reliable closing

Damping force

Stroke Flat damping curve shows the uniform action produced during damper closing at a defined speed.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.51

Tekform Drawer DW70

Rear connector

Decorative cover Front connector

Drawer Decorative side cover

Front Drawer runner connector

Cutting dimensions details

A Bottom panel

Anthracite grey

Decorative cover Front connector Item number for a set

White

Nominal length (mm)

with EasyFix front connector

Rear connector

270

650.8027

150 185*

300*

650.8030

150 185*

350

650.8035

400

650.8040

450

650.8045

500

650.8050

Decorative 550 650.8055 cover

Rear connector

150 185* 150 185*

Drawer side 150 185*Rear 150 185*connector

Dra sid

B ICW - 87 +/-0.5

Drawer runner

ICW - 75

+/-0.5

ICW ECW

ECW: External cabinet width ICW:Internal cabinet +/-0.5 width ICW - 87 NL: Nominal length of drawer

B Back panel

B ICW - 87 +/-0.5

min.105 ICW - 75

15.5

L=NL-10 For further explanation > see page 1.41 +/-0.5

A min. 33

15.5

10.5 32 min. min. 47.5 49

32 10+/-0.1

min. 47.5

10.5 32 min. min. 47.5 49

1.52 min. 47.5

10+/-0.1

Drawer runner

150 185*

Drawer Assembly instructions > see page 1.65runner Front connector B Back panel

Drawer side

ICW - 75

32 +/-0.5 20

**Supplied with EasyFix connectors. Order Screw-in connectors separately > 650.8905.380 Screws not included

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

Full extension 40kg 105mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 1.43-1.44

Installation dimensions

Tekform Double Wall Drawer

· · · · ·

Drawer runner fixing positions

MINIMAL SPACE REQUIRED

145

70 Minimum space required for the cabinet standard DWD

182

Euroscrew Ø6.3 x 13

min. 224

min. 105

min. 185

NL+min.3

NL=270 mm

Chipboard screw Ø3.5 x 15

NL+min.3

192 192

Drilling dimensions for the front panel

70 Screw-in attachment

NL+min.12

192 192

ø10

+/-0.1

min. min. 56 56 32 32 min. 193

NL=300 mm

NL=350 mm

NL+min.12

min. 224

+/-0.1 ø10 ø10 +/-0.1

min. min. 56 56 32 32

min.105 min. 115

11 11

min. 56 32

182

145 37

min. 56 32

EasyFix attachment

192 192

NL+min.12

15.5 15.5 Mounting dimensions for the back panel 15.5

NL=400 mm

192 192

NL=450 mm

192 192

min. 32 47.5 min. 56 32

min. 56 32

±0.5 37.5 ±0.5 37.5

ø10 +/-0.1 min. min. 32 32 47.5 47.5

min. 16 33

32 20

101

min. min. 16 16 33 33

37.5

±0.5

Installation dimensions for the front panel

min. 16 33

min. 32 47.5

15.5

37.5

NL=500 mm

224 224

NL=550 mm

224 224

±0.5

A trial mounting is always recommended. For further information please contact Titus Tekform.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.53

Tekform Drawer DW113

Nominal length (mm)

with EasyFix front connector

Connecting bar

Rear connector

Decorative cover

Drawer side

Front connector

Drawer runner

270

Item number for a set (DW70 + Bracket + Square Bar) Rear Decorative connector 650.8027.150 + 650.8911.150 + 650.8727.150 cover

350

Front 650.8035.150 +

650.8911.150 +

650.8735.150 Drawer

400

650.8040.150 +

650.8911.150 +

650.8740.150

450

650.8045.150 +

650.8911.150 +

Drawer 650.8745.150

500

650.8050.150 +

650.8911.150 +

650.8750.150

550

650.8055.150 +

650.8911.150 +

650.8755.150

connector

side

runner

* Available upon special request Assembly instructions > see page 1.65

Cutting dimensions details A Bottom panel

B Back panel

B ICW - 87 +/-0.5

ICW - 75

ICW ECW

+/-0.5

119

ECW: External cabinet width ICW - 87 +/-0.5 ICW:Internal cabinet width NL: Nominal length of drawer

B Back panel

32 149 32

Connecting bar

119

Rear connector

ICW - 87 +/-0.5

15.5

149

Decorative cover

10.5

Front min.105 connector

ICW - 75

Drawer side

L=NL-10 For further explanation > see page 1.41 +/-0.5

min. 33

Drawer runner

32 min. min. 47.5 49

32 10+/-0.1

min. 47.5

**Supplied with EasyFix connectors. Order Screw-in connectors separately > 650.8905.380 Screws not included

1.54 ICW - 75

+/-0.5

DrawerBrunner type B Back panel Load capacity ICW - 87 Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

119

+/-0.5

Full extension 40kg 160mm 16mm 16mm

Side adjustment +1/-1mm

32 Height 149 adjustment 32 +2/-2mm

Depth adjustment +/-2mm min. 33

For further explanation > see page 1.43-1.44

ICW ECW ICW - 75

+/-0.5

Ø10+/-0.1

min. 56

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet Chipboard screw Ø3.5 x 15

Euroscrew Ø6.3 x 1315.5

min. 160

35 32

149

NL+3

min. 33

35Drilling

dimensions for the front panel

32EasyFix

attachment

NL=270 mm

192 192

NL=300 mm

192 192

NL=350 mm

192 192

NL=400 mm

192 192

NL=450 mm

192 192

min. min. 47.5 49

149 32

min. 33 Ø10+/-0.1

min. 56

Mounting dimensions for the back panel 64 35

32 32

15.5

149 32

Ø10+/-0.1

min. 56

min. min. min. 47.5 4933

Installation dimensions for the front panel

NL=500 mm

224 224

NL=550 mm

224 224

15.5 32

Ø10+/-0.1

min. 32 56

min. min. 47.5 49

A trial mounting is always recommended. For further information please contact Titus Tekform. 15.5 Download supporting documentation from the Titus Tekform website titustekform.com.au 32

1.55

Tekform Double Wall Drawer

· · · · ·

A Bottom panel

Tekform Drawer DW145

270

Connecting bar

Rear connector

Decorative cover

300*

Drawer

Front connector

side Decorative cover

Front connector

Drawer runner

Anthracite grey

Item number for a set

White

Nominal length (mm)

with EasyFix front connector

650.8127 Decorative>

Rear 150K 185* connector

cover

650.8130

150K 185*

350

Front connector 650.8135

400

650.8140

450

650.8145

500

650.8150

550

650.8155

Rear connector

150K 185*

Drawer side 150K 185* Rear connector

runner

One set consists of

Front connector Drawer sides B Back panel

A Bottom panel

2 pcs

B ICW - 87 +/-0.5

ICW - 75

Drawer runner

2 pcs

Connecting bars

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Decorative covers

2 pcs

+/-0.5

ICW ECW

B ECW: External +/-0.5 cabinet width ICW - 87 ICW:Internal cabinet width NL: Nominal length of drawer

B Back panel Connecting bar Decorative cover

B Rear connector

ICW - 87 +/-0.5

L=NL-10 For further explanation > see page 1.41

Front connector

15.5

Mounting instructions

Drawer side min.105

ICW - 75

+/-0.5

Drawer runner

min. 33

min. min. 47.5 49

1 pce

10.5

32 10+/-0.1

min. 47.5

**Supplied with EasyFix connectors. Order Screw-in connectors separately > 650.8905.380 Screws not included

1.56

ICW - 75

+/-0.5

Drawer

150K 185* runner

Assembly instructions > see page 1.65 Decorative Drawer cover

Cutting dimensions details

Drawer side

Drawer side Drawer runner

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

Full extension 40kg 185mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Depth adjustment +/-2mm

For further explanation > see page 1.43-1.44

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

145

182

Chipboard screw Ø3.5 x 15 Euroscrew Ø6.3 x 13

min. 224

min. 185

NL=270 mm

NL+min.3

192 192

NL+min.3

Drilling dimensions for the front panel Screw-in attachment

182

NL+min.12

NL=300 mm

192 192

min. 32 96 56 min. 32 96 56 min. 32 96 56 ø10 +/-0.1 min. 224

ø10 +/-0.1

11 11

min. 32 56 min. 32 56

min.185 min. 193

NL=350 mm NL+min.12

145

192 192

min. 56

EasyFix attachment

Mounting dimensions for the back panel

Installation dimensions for the front panel

192 192

NL=450 mm

192 192

96 min. 32 47.5

15.5

±0.5 37.537.5

±0.5

NL=400 mm

37.5±0.5

min. 56

min. 32 47.5 min. 32 +/-0.1 16 ø10min. 33 47.5

15.515.5

min. 32 56

32 32 32 39

min.16 33 min.16 33

180

NL=500 mm

224 224

NL=550 mm

224 224

min.16 33

min. 32 47.5

15.5

37.5±0.5

A trial mounting is always recommended. For further information please contact Titus Tekform.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.57

Tekform Double Wall Drawer

· · · · ·

connector Decorative cover

Tekform Drawer DW182

Drawer side

Front connector

Drawer runner

Connecting bar

Rear connector

Drawer side

Decorative Drawer cover runner Front connector

Anthracite grey

270

650.8227

150K 185*

300*

650.8230

Front 400 connector

650.8240

450

650.8245

Decorative 350cover 650.8235

Decorative cover Front connector

Item number for a set

White

Nominal length (mm)

with EasyFix front connector

Rear 150K connector

150K 185*

500

650.8250

550

650.8255

185*

Drawer 150K side 185*

150K 185*

Rear connector

Assembly instructions > see page 1.65 Decorative

Drawer runner 150K

Drawer side

cover

One set consists of

Drawer runner

Front Drawer sides connector

185*

150K 185*

Rear connector 2 pcs

Drawe side

Cutting dimensions details B Back panel

A Bottom panel

B ICW - 87 +/-0.5

ICW - 75

2 pcs

Connecting bars

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Decorative covers

2 pcs

+/-0.5

ICW ECW

B ECW: External cabinet width ICW:Internal cabinet width NL:ICW Nominal length of drawer - 87 +/-0.5

B Back panel

Drawer runner

183

B ICW - 87 +/-0.5

15.5

L=NL-10 For further explanation > see page 1.41 32

min.105

ICW - 75

+/-0.5

min. 33

min. min. 47.5 49

Mounting instructions 32

1 pce

10.5 32 10+/-0.1

min. 47.5

**Supplied with EasyFix connectors. Order Screw-in connectors separately > 650.8905.380 Screws not included

1.58 ICW - 75

+/-0.5

Drawer runner

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

Full extension 40kg 224mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Depth adjustment +/-2mm

For further explanation > see page 1.43-1.44

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 182

Chipboard screw Ø3.5 x 15

min. 224

Euroscrew Ø6.3 x 13

NL+min.3

NL=270 mm

192 192

NL=300 mm

192 192

Drilling dimensions for the front panel

NL+min.12

NL=350 mm

min. 32 56

ø10 min. 32+/-0.1 128 56

min. 32 128 56 min. 32 128 56

ø10 +/-0.1

min. 32 128 56 ø10 +/-0.1

128

min. 32 56

min. 224

128

182 Screw-in attachment

EasyFix attachment

192 192

Mounting dimensions for the back panel 9

128

±0.5

37.5 37.5

NL=400 mm

192 192

NL=450 mm

192 192

15.5

min. 32 56 min. 32 47.5

min. min. 16 32 3347.5

+/-0.1 min. ø10 32 47.5

128

15.5 15.5

min. 32 56

32 32

min.16 33

212

64 32 8

±0.5

Installation dimensions for the front panel

37.5

NL=500 mm

224 224

NL=550 mm

224 224

min.16 33

min. 32 47.5

15.5

±0.5

37.5

A trial mounting is always recommended. For further information please contact Titus Tekform.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.59

Tekform Double Wall Drawer

· · · · ·

Drawer Runner

Left

Right

Drawer Side

Left

Right

1.60

Anthracite grey

Item number

White

Zinc plated

External cabinet width (mm)

Tekform Drawer Industrial Packaging

270*

660.8A27

040

300*

660.8A30

040

350*

660.8A35

040

400*

660.8A40

040

450*

660.8A45

040

500

660.8A50

040

550*

660.8A55

040

270*

660.8B27

040

300*

660.8B30

040

350*

660.8B35

040

400*

660.8B40

040

450*

660.8B45

040

500

660.8B50

040

550*

660.8B55

040

270*

660.8C27

150 185*

300*

660.8C30

150 185*

350*

660.8C35

150 185*

400*

660.8C40

150 185*

450*

660.8C45

150 185*

500

660.8C50

150 185*

550*

660.8C55

150 185*

270*

660.8D27

150 185*

300*

660.8D30

150 185*

350*

660.8D35

150 185*

400*

660.8D40

150 185*

450*

660.8D45

150 185*

500

660.8D50

150 185*

550*

660.8D55

150 185*

Assembly instructions > see page 1.65 Installation dimensions and Drawer runner fixing positions > see pages 1.47, 1.49 or 1.51

Side adjustment +1/-1mm

External cabinet width (mm)

Front Connectors

EasyFix

Item number

270

650.8727

150

185*

300*

650.8730

150

185*

350

650.8735

150

185*

400

650.8740

150

185*

450

650.8745

150

185*

500

650.8750

150

185*

550

650.8755

150

185*

650.8025

Drawer Front Marking Jig for Tekform DWD

Rear Connectors

Depth adjustment +/-2mm

For further explanation > see page 1.43-1.44

All bulk packaging parts are available upon special request.

Square Side Bar

Height adjustment +2/-2mm

For DW70

650.8901

150

For DW113

650.8911

150

For DW145

650.8902

150

185*

For DW182

650.8903

150

185*

EasyFix

650.8907

380*

Screw-In

650.8905

380*

Tekform by Titus

650.8904

350

385*

Generic

650.8906

350

385*

Screw-In

Decorative Cover

A trial mounting is always recommended. For further information please contact Titus Tekform.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.61

Tekform Double Wall Drawer

Full extension 40kg 224mm 16mm 16mm

Anthracite grey

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

White

· · · · ·

Inner Drawer Front for Tekform Drawer DW70

100

Front Panel

White

Length (mm)

100

Item number

Anthracite grey

600*

650.8565

511

515*

1200

650.8569

511

515*

350

385*

Assembly details > see page 1.70

Cutting dimension= ICW-90 ICW > see page 1.55

ICW ECW

Made of aluminium 650.8912

Front Bracket Set DW70 (L+R)

Assembly details > see page 1.70

Made of aluminium and plastic Front panel support clip 002110.885.300 white

1.62

Front pa

Front panel

Height adjustment +2/-2mm

For further explanation > see page 1.43-1.44

Front bracket

MINIMAL SPACE REQUIRED standard DWD

145

182 37

min. 224

min. 105

min. 185

NL + 3

Installation dimensions

NL + 3

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ă&#x2DC;3.5 x 15

145

NL+min.12

ICW-90

min. 193

min. 115

ICW-92

min. 224

Tekform Double Wall Drawer

Side adjustment +1/-1mm

Use the second hole for runner fixing.

Front panel

NL=270 mm NL + 12

Euroscrew Ă&#x2DC;6.3 x 13

Front bracket

NL + 12

NL=300 mm

Cutting dimensions details

NL=350 mm

NL=400 mm

ICW ECW

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm

NL=550 mm

A trial mounting is always recommended. For further information please contact Titus Tekform.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.63

182

Front Panel

Item number

Antrhacite grey

White

100

Length (mm)

Inner Drawer Front for Tekform Drawer DW145 With Square Bar

600*

650.8565

511

515*

1200

650.8569

511

515*

350

385*

Front pane

100

Assembly details > see page 1.70 L

Cutting dimension= ICW-98 ICW > see page 1.57

Made of aluminium 650.8914 >

Front Bracket Set (L+R) DW145

Assembly details > see page 1.70 ICW ECW

Made of aluminium and plastic 600*

650.8600

511

515*

1200

650.8604

511

515*

Square Bar

Front panel

Cutting dimension= ICW-98 ICW > see page 1.57

Made of aluminium Front panel support clip 002110.885.300 white

1.64

Front panel

Height adjustment +2/-2mm

Depth adjustment +/-2mm

For further explanation > see page 1.43-1.44

Front bracket Square bar

145

182

min. 224

min. 185

NL+min.3

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ă&#x2DC;3.5 x 15

182

145 37

min. 224

min. 193

Euroscrew Ă&#x2DC;6.3 x 13

ICW-92

Use the second hole for runner fixing.

Front panel

Front bracket

NL=270 mm NL+min.12

NL+min.12

NL=300 mm

ICW-90 Cutting dimensions details Front panel

Front bracket Square bar

NL=350 mm

NL=400 mm

ICW ECW

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm

NL=550 mm

A trial mounting is always recommended. For further information please contact Titus Tekform.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.65

Tekform Double Wall Drawer

Side adjustment +1/-1mm

Front Panel

Item number

Anthracite grey

White

100

Length (mm)

Inner Drawer Front for Tekform Drawer DW182 With Square Bar

600*

650.8565

511

515*

1200

650.8569

511

515*

350

385*

Front pan

100

Assembly details > see page 1.70

Cutting dimension= ICW-98 ICW > see page 1.57

Made of aluminium 650.8916

Front Bracket Set (L+R) DW182

Assembly details > see page 1.70 ICW ECW

Made of aluminium and plastic

Square Bar L

600*

650.8600

511

515*

1200

650.8604

511

515* Front panel

Cutting dimension= ICW-98 ICW > see page 1.57

Made of aluminium Front panel support clip 002110.885.300 white

1.66

Height adjustment +2/-2mm

Depth adjustment +/-2mm

For further explanation > see page 1.43-1.44 Front panel

Front bracket Square bar

182

min. 224

NL+min.3

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet

Chipboard screw Ă&#x2DC;3.5 x 15

182 37

min. 224

Euroscrew Ă&#x2DC;6.3 x 13

ICW-92

NL+min.12

ICW-90

Use the second hole for runner fixing.

Front panel

Front bracket

NL=270 mm

NL=300 mm

Cutting dimensions details

NL=350 mm

NL=400 mm

ICW ECW

NL=450 mm ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=500 mm

NL=550 mm

A trial mounting is always recommended. For further information please contact Titus Tekform.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.67

Tekform Double Wall Drawer

Side adjustment +1/-1mm

Accessories Glass Sides 4mm · 4mm glass sides must be applied with drawer side bars · Tempered glass for improved user safety · Depth front adjustment through side bars enabled

Glass side set

For DW145

400

650.8404

391

450

650.8405

391

500

650.8406

391

550

650.8407

391

650.8484

350 385*

Glass clip set

Anthracite grey

Item number

White

Frosted glass

Nominal length (mm)

Glass side Front panel

Glass clip

Assembly instructions > see page 1.70

Glass side set = 2 pcs Glass clip set = 2 pcs L + 2 pcs R

Front panel

Made of tempered glass, glass clip made of plastic Glass side set

For DW182

ICW ECW

Glass clip set

400

650.8440

391

450

650.8445

391

500

650.8450

391

550

650.8455

391

650.8485

Glass side Assembly instructions > see page 1.70

Glass side set = 2 pcs Glass clip set = 2 pcs L + 2 pcs R Glass clip

ICW ECW

Made of tempered glass, glass clip made of plastic

1.68

350 385*

· 8mm glass sides don’t require side bars · Tempered glass for improved user safety

Glass side set

For DW145

400

650.8463

391

450

650.8464

391

500

650.8465

391

550

650.8466

391

650.8488

Glass clip set

Anthracite grey

Item number

White

Frosted glass

Nominal length (mm)

Tekform Double Wall Drawer

Accessories Glass Sides 8mm

350 385*

Front panel

110

Glass side Assembly instructions > see page 1.71

Glass side set = 2 pcs Glass clip set = 2 pcs L + 2 pcs R

Glass clip

Made of tempered glass, glass clip made of plastic Glass side set

For DW182

110

ICW ECW

Front panel

400

650.8470

391

450

650.8471

391

500

650.8472

391

550

650.8473

391

650.8489

Glass clip set

350 385*

Assembly instructions > see page 1.71

Glass side

Glass side set = 2 pcs Glass clip set = 2 pcs L + 2 pcs R Glass clip

ICW ECW

Made of tempered glass, glass clip made of plastic Download supporting documentation from the Titus Tekform website titustekform.com.au

1.69

Accessories Drawer Storage System

Divider

Drawer Storage System for DW145

Divider

Divider fitting

Riser

Made of aluminium and plastic

1.70

Item number

Anthracite grey

White

Nominal length (mm)

600

650.8706

511 515*

1200

650.8712

511 515*

Riser

650.8703

511 515*

Divider fitting

650.8704

511 515*

Assembly Instructions

Tekform Double Wall Drawer

Screws not included

Assembly Sequence Connect the drawer sides to the bottom panel (1) and fix it with screws (2)

Chipboard screw Ă&#x2DC;3.5 x 15

192 192

Insert the rear connector vertically (3) and push it downwards into recess in the drawer side (4)

192 192

224 224

Insert the back panel (5) and fix it with screws (6)

224 224

Chipboard screw Ă&#x2DC;3.5 x 15

1.71

Download supporting documentation from the Titus Tekform website titustekform.com.au 192 192

Assembly Instructions

Screws not included

Insertion of Front Connectors EasyFix Front connector

Insert the front connectors into holes on the front panel

Front panel

Turn the screws for 90º into locked position 90º turn

90º

Screw-in fixing Use Ø3.5 x 15mm screws for fixing

Front connector Chipboard screw Ø3.5 x 15

Front panel

192

1.72

192

Tekform Double Wall Drawer

Assembly Instructions

Front Panel Mounting / Removal Mounting Attach the front panel to the drawer and press to click

Removal Rotate to disengage

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.73

Assembly Instructions

Drawer Insertion & Removal Insertion Put the drawer horizontally on the runners and push towards the cabinet until you hear the drawer is locked

Push to fully close

Removal Press the button under a drawer keep pressed to pull the drawer out

1.74

Assembly Instructions

3 3 3

Side / Height Adjustment Side Adjustment The side adjustment enables drawer front alignment with the side of the cabinet and perfect lifetime opening and closing of the drawer. To align the drawer front with the cabinet side, rotate the adjustment screw.

+/- 1 mm

+/- 2 mm

Height Adjustment Height adjustment enables perfect vertical positioning of the drawer. To align the drawer front, release the locking screw (1), rotate the excentric dowel (2) and tighten the locking screw back (3).

Release

Adjust

Tighten

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.75

Tekform Double Wall Drawer

Adjustment needs to be done on both sides of the drawer.

Accessories Mounting

Mounting of Connecting Bars and Glass Sides 4mm Bar length adjustment +/- 2 mm

Connecting Bars (for DW145 and DW182)

Glass Sides 4mm

1.76

Tekform Double Wall Drawer

Screws not included

Mounting of Glass Sides 8mm Glass Sides 8mm

Drilling dimension for Glass Sides 8mm

Tekform Drawer DW145

Tekform Drawer DW182

Back panel mounting dimensions

Front panel drilling dimensions â&#x20AC;&#x2DC;EasyFixâ&#x20AC;&#x2122; front connector

Installation dimensions for front panel

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.77

Accessories Mounting

Assembly of Inner Drawer Front DW70

DW145 and DW182 with Square Connecting Bar

1.78

Tekform Single Wall Drawer Product Guide

Tekform Single Wall Drawer Page

Tekform Drawer SW85

1.82

Tekform Drawer SW117

1.84

Tekform Drawer SW150

1.86

Tekform Drawer SW200

1.88

Accessories Front Clips

1.90

Round Railings

1.91

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.79

Tekform Single Wall Drawer

Lifetime warranty •

50,000 cycle tested lifetime warranty

Quality certified •

•

User friendly mounting •

•

Intuitive installation instructions Easy assembly and disassembly of the drawer Assembly equipment available

1.80

By European specialised institutions Level 5 Heavy Domestic CATAS FIRA

Precise drawer alignment •

•

Huge vertical cam adjustment Provides a total +/- 4mm adjustment Side adjustment +/- 1.5mm

Easy front fixing •

•

Front clips available for all drawer fixing methods Spring loaded action for easy location of the drawer front

Tekform Single Wall Drawer Tekform Drawer SW85

Tekform Drawer SW117

Tekform Drawer SW150

Tekform Drawer SW200

Versatile and Reliable The Single Wall Tekform Drawer is the perfect solution to solve kitchen, wardrobe and bathroom vanity drawer applications. Both strong and affordable, the drawerâ&#x20AC;&#x2122;s fluid sliding movement is due to the use of a roller slide system, whilst the epoxy coating makes it silent during operation. The product is available in a large range of heights and depths. The immediate vertical adjustment makes the drawer very versatile and easy to use; it is also ideal both for automatic and manual assembly.

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.81

Tekform Drawer SW85 • • • •

Large range of dimensions from 250mm to 550mm depth Screw-on, dowel fixing machine insertion ready or C15 assembly options Simple bottom mounting for ease of assembly Unilateral restraint-guide compensates for tolerances

White

Nominal length (mm)

Item number

Machine insertion

500

603.8C68.050

150

C15 assembly

250

603.8C62.025

150

270

603.8C62.027

150

350

603.8C62.035

150

400

603.8C62.040

150

450

603.8C62.045

150

500

603.8C62.050

150

550

603.8C62.055

150

Drawer side

Drawer runner

Front clip

Cutting dimensions details

One set consists of ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

Drawer Sides

2 pcs

Drawer Runner

2 pcs

Assembly instructions > see page 1.85

Push latch > page 2.68

1.82

Titusoft MD > page 2.92

Front clips > page 1.84

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness

Single extension roller 25kg 106.5mm 12-18mm

Installation dimensions and drilling patterns

Side adjustment +/- 1.5mm

Height adjustment +/- 2.5mm

Drawer runner fixing positions

Front panel drilling pattern

Back panel drilling pattern

Bottom panel width

Installation and back panel dimensions

Drawer runner mounting

7.5 7.5 7.5 7.5 4 12

1212

44 12

Fixing screws for front brackets and drawer runner

Euro Screws

Chipboard screws

611.8E23.363.813

611.8K16.240.016

13 13

Download supporting documentation from the Titus Tekform website titustekform.com.au 7.57.5 7.57.5

4 4

12 12 1212

4 4

1.83

Tekform Single Wall Drawer

路路路路

Tekform Drawer SW117 • • • •

C15 assembly

Drawer side

Drawer runner

White

Nominal length (mm)

Item number

250

603.8C72.025

150

270

603.8C72.027

150

350

603.8C72.035

150

400

603.8C72.040

150

450

603.8C72.045

150

500

603.8C72.050

150

550

603.8C72.055

150

Front clip

Cutting dimensions details

One set consists of

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

Drawer Sides

2 pcs

Drawer Runner

2 pcs

Assembly instructions > see page 1.85

Push latch > page 2.68

1.84

Titusoft MD > page 2.92

Front clips > page 1.84

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness

Side adjustment +/- 1.5mm

Roller sides 25kg 138.5mm 12-18mm

Installation dimensions and drilling patterns

Height adjustment +/- 2.5mm

Drawer runner fixing positions

Front panel drilling pattern

Back panel drilling pattern

Bottom panel width

Installation and back panel dimensions

Drawer runner mounting

7.5 7.5 7.5 7.5 4 12

1212

44 12

Fixing screws for front brackets and drawer runner

Euro Screws

Chipboard screws

611.8E23.363.813

611.8K16.240.016

13 13

Download supporting documentation from the Titus Tekform website titustekform.com.au 7.57.5 7.57.5

4 4

12 12 1212

4 4

1.85

Tekform Single Wall Drawer

路路路路

Tekform Drawer SW150 • • • •

C15 assembly

Drawer side

Drawer runner

White

Nominal length (mm)

Item number

250

603.8C82.025

150

270

603.8C82.027

150

350

603.8C82.035

150

400

603.8C82.040

150

450

603.8C82.045

150

500

603.8C82.050

150

550

603.8C82.055

150

Front clip

Cutting dimensions details

One set consists of

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

Drawer Sides

2 pcs

Drawer Runner

2 pcs

Assembly instructions > see page 1.85

Push latch > page 2.68

1.86

Titusoft MD > page 2.92

Front clips > page 1.84

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness

Side adjustment +/- 1.5mm

Roller sides 25kg 170.5mm 12-18mm

Installation dimensions and drilling patterns

Height adjustment +/- 2.5mm

Drawer runner fixing positions

Front panel drilling pattern

Back panel drilling pattern

Bottom panel width

Installation and back panel dimensions

Drawer runner mounting

7.5 7.5 7.5 7.5 4 12

1212

44 12

Fixing screws for front brackets and drawer runner

Euro Screws

Chipboard screws

611.8E23.363.813

611.8K16.240.016

13 13

Download supporting documentation from the Titus Tekform website titustekform.com.au 7.57.5 7.57.5

4 4

12 12 1212

4 4

1.87

Tekform Single Wall Drawer

路路路路

Tekform Drawer SW200 • • • •

C15 assembly

Drawer side

White

Nominal length (mm)

Item number

250

603.8C92.025

150

270

603.8C92.027

150

350

603.8C92.035

150

400

603.8C92.040

150

450

603.8C92.045

150

500

603.8C92.050

150

550

603.8C92.055

150

Drawer runner

Front clip

Cutting dimensions details

One set consists of

Drawer Sides

2 pcs

Drawer Runner

2 pcs

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

Assembly instructions > see page 1.85

Push latch > page 2.68

1.88

Titusoft MD > page 2.92

Front clips > page 1.84

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness

Side adjustment +/- 1.5mm

Roller sides 25kg 233.5mm 12-18mm

Installation dimensions and drilling patterns

Height adjustment +/- 2.5mm

Drawer runner fixing positions

Front panel drilling pattern

Back panel drilling pattern

Installation and back panel dimensions

Drawer runner mounting

7.5 7.5 7.5 7.5 4 12

1212

44 12

Fixing screws for front brackets and drawer runner

Euro Screws

Chipboard screws

611.8E23.363.813

611.8K16.240.016

13 13

Download supporting documentation from the Titus Tekform website titustekform.com.au 7.57.5 7.57.5

4 4

12 12 1212

4 4

1.89

Tekform Single Wall Drawer

路路路路

Accessories â&#x20AC;˘ â&#x20AC;˘

Front Clips

Screw-on

Machine insertion 10mm

Expanding dowel 10mm

1.90

Front clips must be ordered separately Choose clip based on your preferred mounting method

Side

Mounting

Item number

Right

Screw-on

603.8C46.005

Left

Screw-on

603.8C46.006

Right

Machine insertion

603.8C46.010

Left

Machine insertion

603.8C46.012

Right

Expanding dowel

603.8C46.015

Left

Expanding dowel

603.8C46.016

Length (mm)

250

603.8C98

270

< < 603.8C98

8)"5/)(9/:0; 8)"5/)(9/:0; 8)"5/)(9/:0; !21 !21 !21 !"1) !"1) !"1) 521) 521) 521) 411) 411) 411) 421) 421) 421) 211) 211) 211) 221) 221) 221)

350

Ø10 min. 11 min. 11

min. 11

Screw-on B

603.8C98

050.K

550

603.8C98

055.K

250

603.8C98

125.K

Screw-on Railing

5&90; 5&90; ="2&+/0( 5&90;511 511 511 411 411 411 421 421 421 211 211 211 611 611 "11 "11

611 !"#$%&'()*)$+&,"'&8""%.$&0(12&3($.*&4&(55.-0*6&5.7#.$1.

Round Railing for Wooden Back Panel Assembly Sequence

8.5

"11 711 711 911 911 911

7.5711

603.8C98 !21 !!"32> !!"32 H=85 !"1)

!!"32 !4"32) !4"32) !4"32) > 5!"32) 5!"32) 5!"32) 5""32 5""32 > 5""32 4!"32 4!"32 4!"32 4""32) 4""32) > 4""32) 2!"32 2!"32 H=117 2!"32

603.8C98 521) 411)

127.K 135.K 140.K

450

211) 603.8C98

145.K

421)

221)

500

603.8C98

150.K

550

603.8C98

155.K

Tubes positioning

200

603.8C98 C>

="2&+/0(:"+/*( ="2&+/0(:"+/*( Drawer 0;&4>+/## 0;&4>+/## ="2&+/0(:"+/*( SW85 0;&4>+/## 02806807 02806807 !55 SW117 02806807 02806807 02806807 02806807 02806807 02806807

02806807 02806807 02806807 02806807 02806807 02806807 02806807 02806807 02806807 02806807 02806807 02806807

32 - 48 - 64

!55

- 64 - 80 !55 48 555 555 555 575 575 575 455 455

455 255 255 255 655 655 655 "55 "55 "55 755 755 755 H=85

02806807 02806807 02806807 02806807

4.5

603.8C98

Back Bracket (wood) ="2&+/0( ="2&+/0(

Assembly Instructions

400

< < !21 !21 !"1) !"1) 521) 521) 411) 411) 421) 421) 211) 211) 221) 221)

204)

264)

040.K

500

270

464)

035.K

045.K

603.8C98 404)

a= 64 min.

564)

603.8C98 !74)

603.8C98

350

027.K

450

8)"5/)(9/:0; 8)"5/)(9/:0; 8)"5/)(9/:0; !21 !21 !21 !"1) !"1) !"1) 521) 521) 521) 411) 411) 411) 421) 421) 421) 211) 211) 211) 221) 221) 221)

>!57 !57 !57 !27) >!27) !27) 557 557 557> 577 577 577 457 457 457> 477) 477) 477) 257)>257) 257)

EasyFix Railing

400

!"#$%&'$()"#*+)%*&#,

Ø10

!64

025.K

37.5 32

Ø10

< !64 !64 !74) !74) 564) 564) 404) 404) 464) 464) 204) 204) 264) 264)

148

EasyFix

Round Railings

Item number

180

•

White

Improved storage in high drawers Easy one-step fixing and screw-on front attachment Lasting quality

•

32 b-16

H=117

37.5

!""

32 32 d-32 H=150

d= 96 min.

3 4

32 37.5 64

±2°

!"" !""

b= 64 min.

#$%&'()*+,'-)+-).. #$%&'()*+,'-)+-).. #$%&'()*+,'-)+-)..

!""

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.91

Tekform Single Wall Drawer

Accessories

Drawer Runners Ball Bearing Drawer Runners •

Closing

Mounting

Item number

350

Standard

Side

603.8B20.027

342

350

Soft Close Side

603.8B20.035

450

400

Soft Close Side

603.8B20.040

450

Soft Close Side

603.8B20.045

450

500

Soft Close Side

603.8B20.050

450

550

Soft Close Side

603.8B20.055

450

600

Soft Close Side

603.8B20.060

450

Zinc plated

Weight capacity (kg)

Ball Bearing Drawer Runners, Full Extension

Full extension Ball bearing

Length (mm)

•

Made of steel Ball Bearing Drawer Runners, Full Extension with Soft Close

•

Made of steel

1.92

Integrated soft close

Drawer Runners Ball Bearing Drawer Runners â&#x20AC;˘

Weight capacity (kg)

Closing

Mounting

Item number

250

Standard

Side

603.8B20.025

454

300

Standard

Side

603.8B21.030

454

350

Standard

Side

603.8B21.035

454

400

Standard

Side

603.8B21.040

454

450

Standard

Side

603.8B21.045

454

500

Standard

Side

603.8B21.050

454

550

Standard

Side

603.8B21.055

454

600

Standard

Side

603.8B21.060

454

250

Standard

Side

603.8B20.025

450

300

Standard

Side

603.8B21.030

450

350

Standard

Side

603.8B21.035

450

400

Standard

Side

603.8B21.040

450

Standard

Side

603.8B21.045

450

500

Standard

Side

603.8B21.050

450

550

Standard

Side

603.8B21.055

450

600

Standard

Side

603.8B21.060

450

650

Standard

Side

603.8B21.065

450

700

Standard

Side

603.8B21.070

450

Black

Zinc plated

Length (mm)

Ball Bearing Drawer Runners, Full Extension

Full extension Ball bearing

Drawer Runners

â&#x20AC;˘

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.93

1.94

White

Weight capacity (kg)

Length (mm)

Tekform Bottom Mounted Roller Runners

Item number

250

603.8C05.025

001

300

603.8C05.030

001

350

603.8C05.035

001

400

603.8C05.040

001

450

603.8C05.045

001

500

603.8C05.050

001

550

603.8C05.055

001

600

603.8C05.060

001

• • •

25kg dynamic standard capacity Easy assembly Add-on SlowMotion damping available Standard closing

Drawer Runners

•

Drawer mounting and dimensions

Standard position for the dowels

Slides fixing dimensions

L= Nominal Length AV= Extension Loss L

270

300

350

400

450

500

550

600

100

118

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.95

Tekform Drawers Bill of Materials - DWD DWD113 with Square Side Bar

DWD145 with 4mm Glass Sides

DWD182 with 4mm Glass Sides

Drawer set

Bracket

Square side bar

270mm

650.8027.150

650.8911.150

650.8727.150

350mm

650.8035.150

650.8911.150

650.8735.150

400mm

650.8040.150

650.8911.150

650.8740.150

450mm

650.8045.150

650.8911.150

650.8745.150

500mm

650.8050.150

650.8911.150

650.8750.150

550mm

650.8055.150

650.8911.150

650.8755.150

Length

Glass finish

Drawer set

Glass sides

Rear connector

Glass clips

Square side bar

400mm

Frosted Glass

650.8140.150K

650.8404.391

650.8484.350

650.8902.150

650.8740.150

450mm

Frosted Glass

650.8145.150K

650.8405.391

650.8484.350

650.8902.150

650.8745.150

500mm

Frosted Glass

650.8150.150K

650.8406.391

650.8484.350

650.8902.150

650.8750.150

550mm

Frosted Glass

650.8155.150K

650.8407.391

650.8484.350

650.8902.150

650.8755.150

Length

Glass finish

Drawer set

Glass sides

Rear connector

Glass clips

Square side bar

400mm

Frosted Glass

650.8240.150K

650.8440.391

650.8485.350

650.8903.150

650.8740.150

450mm

Frosted Glass

650.8245.150K

650.8445.391

650.8485.350

650.8903.150

650.8745.150

500mm

Frosted Glass

650.8250.150K

650.8450.391

650.8485.350

650.8903.150

650.8750.150

550mm

Frosted Glass

650.8255.150K

650.8455.391

650.8485.350

650.8903.150

650.8755.150

Length

Glass finish

Drawer set

Glass sides

Rear connector

Glass clips

400mm

Frosted Glass

650.8140.150K

650.8463.391

650.8488.350

650.8902.150

450mm

Frosted Glass

650.8145.150K

650.8464.391

650.8488.350

650.8902.150

500mm

Frosted Glass

650.8150.150K

650.8465.391

650.8488.350

650.8902.150

550mm

Frosted Glass

650.8155.150K

650.8466.391

650.8488.350

650.8902.150

Length

Glass finish

Drawer set

Glass sides

Rear connector

Glass clips

400mm

Frosted Glass

650.8240.150K

650.8470.391

650.8489.350

650.8903.150

450mm

Frosted Glass

650.8245.150K

650.8471.391

650.8489.350

650.8903.150

500mm

Frosted Glass

650.8250.150K

650.8472.391

650.8489.350

650.8903.150

550mm

Frosted Glass

650.8255.150K

650.8473.391

650.8489.350

650.8903.150

Length

Drawer set DW70

Drawer set DW145

Drawer set DW182

Square Front Bar Front panel (DW145 / DW182)

270mm

650.8027.150

650.8127.150K

650.8227.150K

650.8604.150

650.8569.150

350mm

650.8035.150

650.8135.150K

650.8235.150K

650.8604.150

650.8569.150

400mm

650.8040.150

650.8140.150K

650.8240.150K

650.8604.150

650.8569.150

450mm

650.8045.150

650.8145.150K

650.8245.150K

650.8604.150

650.8569.150

500mm

650.8050.150

650.8150.150K

650.8250.150K

650.8604.150

650.8569.150

550mm

650.8055.150

650.8155.150K

650.8255.150K

650.8604.150

650.8569.150

DWD145 with 8mm Glass Sides

DWD182 with 8mm Glass Sides

DWD Inner Drawer Fronts

Length

*with EasyFix front connectors and 1200mm panel width and square bar Front panel support clip 002110.885.300 white

1.96

Front bracket

DW70 (all lengths): 650.8912.350

DW145 (all lengths): 650.8914.350

DW182 (all lengths): 650.8916.350

Slimline SDWD70 with Aluminium Front

Slimline SDWD70 with Glass Front

Length

Drawer finish

Drawer set

Front panel

Front bracket

270mm

White

655.8T27.150.00

655.8189.511.00

655.8065.150.00

350mm

White

655.8T35.150.00

655.8189.511.00

655.8065.150.00

400mm

White

655.8T40.150.00

655.8189.511.00

655.8065.150.00

450mm

White

655.8T45.150.00

655.8189.511.00

655.8065.150.00

500mm

White

655.8T50.150.00

655.8189.511.00

655.8065.150.00

550mm

White

655.8T55.150.00

655.8189.511.00

655.8065.150.00

270mm

Anthracite

655.8T27.185.00

655.8189.515.00

655.8065.185.00

350mm

Anthracite

655.8T35.185.00

655.8189.515.00

655.8065.185.00

400mm

Anthracite

655.8T40.185.00

655.8189.515.00

655.8065.185.00

450mm

Anthracite

655.8T45.185.00

655.8189.515.00

655.8065.185.00

500mm

Anthracite

655.8T50.185.00

655.8189.515.00

655.8065.185.00

550mm

Anthracite

655.8T55.185.00

655.8189.515.00

655.8065.185.00

Length

Drawer finish

Glass finish

Drawer set

Front panel

Glass panel

Front bracket

270mm

White

Transparent

655.8T27.150.00

655.8209.511.00

655.8295.391.00

655.8305.350.00

350mm

White

Transparent

655.8T35.150.00

655.8209.511.00

655.8295.391.00

655.8305.350.00

400mm

White

Transparent

655.8T40.150.00

655.8209.511.00

655.8295.391.00

655.8305.350.00

450mm

White

Transparent

655.8T45.150.00

655.8209.511.00

655.8295.391.00

655.8305.350.00

500mm

White

Transparent

655.8T50.150.00

655.8209.511.00

655.8295.391.00

655.8305.350.00

550mm

White

Transparent

655.8T55.150.00

655.8209.511.00

655.8295.391.00

655.8305.350.00

270mm

Anthracite

Transparent

655.8T27.185.00

655.8209.515.00

655.8295.392.00

655.8305.385.00

350mm

Anthracite

Transparent

655.8T35.185.00

655.8209.515.00

655.8295.392.00

655.8305.385.00

400mm

Anthracite

Transparent

655.8T40.185.00

655.8209.515.00

655.8295.392.00

655.8305.385.00

450mm

Anthracite

Transparent

655.8T45.185.00

655.8209.515.00

655.8295.392.00

655.8305.385.00

500mm

Anthracite

Transparent

655.8T50.185.00

655.8209.515.00

655.8295.392.00

655.8305.385.00

550mm

Anthracite

Transparent

655.8T55.185.00

655.8209.515.00

655.8295.392.00

655.8305.385.00

*with EasyFix front connectors and 1200mm panel width Front panel support clip 002110.885.300 white

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.97

BOM Codes

Tekform Drawers Bill of Materials - Slimline DWD Inner Fronts

Tekform Drawers Bill of Materials - Slimline DWD Inner Fronts Length

Drawer finish

Drawer set

Front panel

Front bar

Front bracket

270mm

White

655.8V27.150.00

655.8189.511.00

655.8214.511.00

655.8101.150.00

350mm

White

655.8V35.150.00

655.8189.511.00

655.8214.511.00

655.8101.150.00

400mm

White

655.8V40.150.00

655.8189.511.00

655.8214.511.00

655.8101.150.00

450mm

White

655.8V45.150.00

655.8189.511.00

655.8214.511.00

655.8101.150.00

500mm

White

655.8V50.150.00

655.8189.511.00

655.8214.511.00

655.8101.150.00

550mm

White

655.8V55.150.00

655.8189.511.00

655.8214.511.00

655.8101.150.00

270mm

Anthracite

655.8V27.185.00

655.8189.515.00

655.8214.515.00

655.8101.185.00

350mm

Anthracite

655.8V35.185.00

655.8189.515.00

655.8214.515.00

655.8101.185.00

400mm

Anthracite

655.8V40.185.00

655.8189.515.00

655.8214.515.00

655.8101.185.00

450mm

Anthracite

655.8V45.185.00

655.8189.515.00

655.8214.515.00

655.8101.185.00

500mm

Anthracite

655.8V50.185.00

655.8189.515.00

655.8214.515.00

655.8101.185.00

550mm

Anthracite

655.8V55.185.00

655.8189.515.00

655.8214.515.00

655.8101.185.00

Length

Drawer finish

Glass finish

Drawer set

Front panel

Glass panel

Front bracket

270mm

White

Transparent

655.8V27.150.00

655.8209.511.00

655.8224.391.00

655.8103.350.00

350mm

White

Transparent

655.8V35.150.00

655.8209.511.00

655.8224.391.00

655.8103.350.00

400mm

White

Transparent

655.8V40.150.00

655.8209.511.00

655.8224.391.00

655.8103.350.00

450mm

White

Transparent

655.8V45.150.00

655.8209.511.00

655.8224.391.00

655.8103.350.00

500mm

White

Transparent

655.8V50.150.00

655.8209.511.00

655.8224.391.00

655.8103.350.00

550mm

White

Transparent

655.8V55.150.00

655.8209.511.00

655.8224.391.00

655.8103.350.00

270mm

Anthracite

Transparent

655.8V27.185.00

655.8209.515.00

655.8224.392.00

655.8103.385.00

350mm

Anthracite

Transparent

655.8V35.185.00

655.8209.515.00

655.8224.392.00

655.8103.385.00

400mm

Anthracite

Transparent

655.8V40.185.00

655.8209.515.00

655.8224.392.00

655.8103.385.00

450mm

Anthracite

Transparent

655.8V45.185.00

655.8209.515.00

655.8224.392.00

655.8103.385.00

500mm

Anthracite

Transparent

655.8V50.185.00

655.8209.515.00

655.8224.392.00

655.8103.385.00

550mm

Anthracite

Transparent

655.8V55.185.00

655.8209.515.00

655.8224.392.00

655.8103.385.00

Slimline SDWD145 with Aluminium Front and Square Bar

Slimline SDWD145 with Glass Front

*with EasyFix front connectors and 1200mm width Front panel support clip 002110.885.300 white

1.98

Length

Drawer finish

Drawer set

Front panel

Front bar

Front bracket

270mm

White

655.8Z27.150.00

655.8189.511.00

655.8214.511.00

655.8170.150.00

350mm

White

655.8Z35.150.00

655.8189.511.00

655.8214.511.00

655.8170.150.00

400mm

White

655.8Z40.150.00

655.8189.511.00

655.8214.511.00

655.8170.150.00

450mm

White

655.8Z45.150.00

655.8189.511.00

655.8214.511.00

655.8170.150.00

500mm

White

655.8Z50.150.00

655.8189.511.00

655.8214.511.00

655.8170.150.00

550mm

White

655.8Z55.150.00

655.8189.511.00

655.8214.511.00

655.8170.150.00

270mm

Anthracite

655.8Z27.185.00

655.8189.515.00

655.8214.515.00

655.8170.185.00

350mm

Anthracite

655.8Z35.185.00

655.8189.515.00

655.8214.515.00

655.8170.185.00

400mm

Anthracite

655.8Z40.185.00

655.8189.515.00

655.8214.515.00

655.8170.185.00

450mm

Anthracite

655.8Z45.185.00

655.8189.515.00

655.8214.515.00

655.8170.185.00

500mm

Anthracite

655.8Z50.185.00

655.8189.515.00

655.8214.515.00

655.8170.185.00

550mm

Anthracite

655.8Z55.185.00

655.8189.515.00

655.8214.515.00

655.8170.185.00

Length

Drawer finish

Glass finish

Drawer set

Front panel

Glass panel

Front bracket

270mm

White

Transparent

655.8Z27.150.00

655.8209.511.00

655.8284.391.00

655.8172.350.00

350mm

White

Transparent

655.8Z35.150.00

655.8209.511.00

655.8284.391.00

655.8172.350.00

400mm

White

Transparent

655.8Z40.150.00

655.8209.511.00

655.8284.391.00

655.8172.350.00

450mm

White

Transparent

655.8Z45.150.00

655.8209.511.00

655.8284.391.00

655.8172.350.00

500mm

White

Transparent

655.8Z50.150.00

655.8209.511.00

655.8284.391.00

655.8172.350.00

550mm

White

Transparent

655.8Z55.150.00

655.8209.511.00

655.8284.391.00

655.8172.350.00

270mm

Anthracite

Transparent

655.8Z27.185.00

655.8209.515.00

655.8284.392.00

655.8172.385.00

350mm

Anthracite

Transparent

655.8Z35.185.00

655.8209.515.00

655.8284.392.00

655.8172.385.00

400mm

Anthracite

Transparent

655.8Z40.185.00

655.8209.515.00

655.8284.392.00

655.8172.385.00

450mm

Anthracite

Transparent

655.8Z45.185.00

655.8209.515.00

655.8284.392.00

655.8172.385.00

500mm

Anthracite

Transparent

655.8Z50.185.00

655.8209.515.00

655.8284.392.00

655.8172.385.00

550mm

Anthracite

Transparent

655.8Z55.185.00

655.8209.515.00

655.8284.392.00

655.8172.385.00

Slimline SDWD182 with Aluminium Front and Square Bar

Slimline SDWD182 with Glass Front

*with EasyFix front connectors and 1200mm width Front panel support clip 002110.885.300 white

Download supporting documentation from the Titus Tekform website titustekform.com.au

1.99

BOM Codes

Tekform Drawers Bill of Materials - Slimline DWD Inner Fronts

0.1

Concealed Hinges

Hinges & Dampers

0.2

Concealed Hinges Product Guide

T-type Page

0mm

110°

For wooden doors

2.24

9mm

110°

For wooden doors

2.26

17mm

110°

For wooden doors

2.26

T-type Glissando 110/45°

45°, 17mm

110°

For wooden doors

2.28

T-type Glissando 110/90°

90°, 17mm

110°

For wooden doors

2.30

T-type 110

0mm

110°

For wooden doors

2.32

9mm

110°

For wooden doors

2.34

17mm

110°

For wooden doors

2.34

T-type 110/45°

45°, 17mm

110°

For wooden doors

2.36

T-type 110/90°

90°, 17mm

110°

For wooden doors

2.38

T-type 170

0mm

170°

For wooden doors

2.40

9mm

170°

For wooden doors

2.40

110°

For wooden doors

2.42

T-type Glissando 110

T-type Pie-cut Corner Cabinet T-type Mounting Plates

2.44

S-type 0mm

110°

For wooden doors

2.48

9mm

110°

For wooden doors

2.48

0mm

110°

For wooden doors

2.50

9mm

110°

For wooden doors

2.50

15mm

110°

For wooden doors

2.50

S-type 110/45º

45º, 18mm

110°

For wooden doors

2.52

S-type 110/90º

90º, 18mm

110°

For wooden doors

2.54

S-type 170

0mm

165°

For wooden doors

2.56

For wooden doors

2.58

S-type Plus 110

S-type 110

S-type Pie-cut Corner Cabinet

2.2

S-type Mounting Plates

2.60

B-type 0mm

B-type Ø35 Shallow Cup

108°

For wooden doors

2.64

General Hinges Butt Hinge

2.66

Other Hinges

2.67

Accessories Push Latch

2.68

Push to Open Catches

2.68

Cover Caps

2.70

Soft Closing Systems Mounting

Compatibility

Opening Angle

Information

Page

2.72

Glissando TT

Add-on

T-type

110°

2.82

Glissando TL

Add-on

S-type, B-type

110°

2.84

Glissando TL 170

Add-on

T-type, S-type, B-type

170°

2.86

Glissando CR

Stand alone

T-type, S-type, B-type

110°, 120°, 170°

2.88

Titusoft WD

Stand alone

For wooden drawers

2.90

Titusoft MD

Stand alone

For metal drawers

2.92

2.3

A Comprehensive Range

T-type Hinge Titus New Generation hinge for quick furniture assembly and consistent performance on a wide range of doors '3Way' snap-on mounting Highly tolerant Adjustable damping 'ConfidentClose' Numerous application possibilities Âˇ For simpler cabinet design Âˇ For demanding high quality furniture of larger heights and weights

S-type Hinge Simple and quick snap-on mounting system Easy assembly and disassembly Adjustable damping 'ConfidentClose' Push to open for handleless furniture

B-type Hinge Reliable slide-on mounting system Simplicity in use Reliable door closing

2.4

Door tab K

Mounting Mounting mode plate type

Mounting plate height

Soft closing options

Durability (cycles)

Page

110° 170°

3-6mm

'3Way' Snap-on

0mm 1mm 2mm 3mm

Damping integrated in the hinge cup

100,000

2.24

80,000

2.48

80,000

2.64

15-26mm 0mm 9mm 17mm angled

Cruciform Linear

Glissando add-on or stand-alone damping solutions

110° 170°

16-24mm 0mm 9mm 15mm angled

3-5mm

Snap-on

Cruciform

0mm 1mm 2mm 3mm

Damping integrated in the hinge cup Glissando add-on or stand-alone damping solutions

108°

12-24mm 0mm

3-6mm

Slide-on

Cruciform

0mm 1mm 2mm 3mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

Glissando add-on or stand-alone damping solutions

2.5

Concealed Hinges

Opening Door Crankings angle thickness

T-type Hinges ‘3Way’ snap-on · ·

Allows for intuitive hinge-to-plate mounting in three directions Enhanced mounting experience

Easy door installation even in

Highly tolerant

Rigidity

Easy door installation Highly tolerant Rigidity · Hinge-to-plate attachment assures Efficient performance in marginal values cases of 4-5 hinges per door of tolerances stability and rigidity even in cases of · Smooth performance · Reliable door closing in case of · Hinge-to-plate · E fﬁcient performance in attachment 4-5 hinges per door accidental misalignment marginal ·values of tolerance ‘ConfidentClose’ assured

· Easy and quick assembly and disassembly

· Reliable door closing in case of accidental misalignment

· Flexibility for the furniture user

· ‘ConfidentClose’ assured

· Tight hinge-to-plate joint improves hinge stability and reduces door sag 2.6

assures stability and rigidity

· Smooth performance

Concealed Hinges

T-Type Hinges

Low hinge cup drilling depth

‘Titus Damper Inside’

Proven Glissando concept

Titus proprietary multi-purpose damping Enables application on door thicknesses‘Titus ·Damper Damper is positioned Adjustable damping Inside’ Proven· Glissando concept technology from 15mm on transversal on the hinge cup · Reliable and consistent · Reliable performance · Consistent performance on · Titus proprietary multi-purpose life-long damping · Damper is positioned · No rebounce doors of different dimensions damping technology

and weights · Intuitive adjustment procedure

transversal on the hinge cup

· Reliable and consistent life-long damping

· Reliable performance

· No rebounce

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.7

Concealed Hinges Door Overlay

How to Achieve the Desired Door Overlay Choose the hinge of appropriate cranking

Concealed hinges with specific hinge arms are available for different door overlays. The most common overlays are:

Cabinet side Door

1. Full overlay Use a hinge with 0mm cranking

2. Partial overlay for double doors Use a hinge with 5mm or 9mm cranking

3. Inset door Use a hinge with 15mm or 17mm cranking

Choose the mounting plates of appropriate thickness

To achieve the desired overlay (x) while using a determined drilling distance (K), a mounting plate of appropriate

thickness (D) must be chosen from the enclosed table or calculated with the given formula. x

K 4 5

x K

D=4+K-x

Choose the appropriate drilling distance (K)

To achieve the desired door overlay (x) while using a determined mounting plate thickness (D), an appropriate drilling distance (K) must be chosen.

x K

2.8

1 2 3

3 3

0 D

E L

LE 4

Concealed Hinges

Through side adjustment

The side adjustment is made by rotating the appropriate screw on the hinge arm.

Adjustment range

Door clearance and gap

The door clearance (Fâ&#x2030;ĽFmin) and gap (Z) represent the minimal necessary space needed for the correct opening and closing of the door. The minimal required values depend on the cup drilling distance (K), door thickness (V).

and the type of hinge. The minimum clearance scale can be found on product pages > see Door (page) clearance chart. When using hinges with partial overlay the door clearance must be twice as large (Fâ&#x2030;Ľ2Fmin).

16 17 18 19 20 21 22

3 0.3 0.5 0.7 1.0 1.3 1.7 2.5

K 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1

K F

5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN Gap ZMIN=0

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.9

Concealed Hinges Hinge Cup Types

How to Mount the Hinge on the Door There are cup type symbols listed on product pages beside item numbers. Below you can find their explanation.

No pre-mounting

The hinge is fixed on the door with two screws. 3mm pilot holes recommended.

'EasyFix' time saving system

Quarter turn fixing for 8mm holes (interaxis 45/9.5) or 10mm holes (interaxis 48/6 and 52/5.5).

90ยบ

Machine insertion ready hinge cup

Pre-mounted dowels suitable for machine insertion into 8mm holes (interaxis 45/9.5) or 10mm holes (interaxis 48/6 and 52/5.5).

Pre-mounted expando dowels

Pre-mounted expanding dowels with triple-start screw for fast fixing, suitable for 8mm holes.

2.10

Pre-mounted euro screws for 5mm holes. Where not specified otherwise, Euro screws are 13mm long.

Hinge cup with pre-mounted chipboard screws

Pre-mounted chipboard screws. 3mm pilot holes recommended.

luminium frame A screw-on hinge cup

The hinge is fixed onto a specific drilling on the aluminium frame.

Download supporting documentation from the Titus Tekform website titustekform.com.au

Concealed Hinges

Hinge cup with pre-mounted Euro screws

2.11

Concealed Hinges Boring Details

Drilling Patterns for Hinge Cup Interaxis

Interaxis

45mm

48mm

52mm

· T-type · S-type · B-type

*Available on special request > see page 0.3

Hinge cup type

9.5

5.5

Interaxis 45mm, 48mm* and 52mm

Ø 35

Drilling pattern

9.5

Premounted expando dowels

5.5

9.5

Machine insertion ready

Premounted chipboard screws

Screw-on ready

5.5

EasyFix system

9.5

Interaxis is the distance between two holes for fixing screws on the hinge cup.

2.12

Premounted Euro screws

5.5

Concealed Hinges

Concealed Hinges Mounting Plate Type

How to Fix the Mounting Plate on the Cabinet Side There are mounting plate type symbols listed on product pages beside item numbers. Below you can find their explanation.

No premounting, chipboard screw ready

The mounting plate is fixed with two chipboard screws or equivalent. 3mm pilot holes recommended.

No premounting, Euro screw ready

Fixing with 6.3mm euro screws into pre-drilled 5mm holes. Choosing the appropriate head and length for use with this mounting plate is recommended.

Machine insertion ready

Premounted dowels for machine insertion into 10mm holes.

Premounted Euro screws

Euro screws for 5mm holes are premounted on the mounting plate. Available lengths: 11mm, 13mm and 15mm.

Premounted expanding dowels

Premounted expanding dowels for 5mm holes. Available lengths: 7.5mm and 10.5mm.

Premounted chipboard screws

The mounting plate is fixed with two premounted chipboard screws. 3mm pilot holes recommended.

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.13

Concealed Hinges Hinge-to-plate Mounting

How to Assemble the Hinge and the Mounting Plate T-type ‘3Way’ snap-on

‘3Way’ snap-on mounting for intuitive hinge-to-plate assembly in three directions: Front assembly

Rear assembly

Top assembly

Disassembly: For disassembly press rear button on the hinge arm.

2.14

- From the hinge arm front - From the hinge arm rear - From the top

The door is assembled on the cabinet side simply by positioning the two hooks under the hinge arm on the outer part of the mounting plate and pressing gently on the rear part of the hinge arm.

For disassembly, press the rear button on the hinge arm.

Assembly

Disassembly

B-type slide-on

The hinge is assembled by sliding the hinge arm over the mounting plate. The hinge adjustment screw must fit into the groove on the mounting plate.

After adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.

Key-hole

The hinge is assembled on the mounting plate by inserting the fixing screw on the appropriate hole on the hinge arm.

After adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.

Âˇ *Wide Angle hinge

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.15

Concealed Hinges

S-type snap-on

Concealed Hinges Loadings

Use the appropriate number of hinges so that the door height or weight does not exceed that shown below.

How Many Hinges per Door? Check the enclosed specifications for the number of required hinges per door by considering door height and weight.

Concealed hinges with Ø35mm hinge cup diameter · T-type · S-type · B-type · Other hinges

height (cm)

250

200

150

100 50 weight (kg)

· T-type Glissando

2 4-7

8-12 13-16 17-22

height (cm)

250

200

150

100 50 weight (kg)

2.16

2 4-7

8-12 13-16 17-22

Note: Hinges with integrated damping can be combined with non-damped hinges from standard hinge range. A trial mounting is always recommended.

Adjustment range can be found on the product pages.

Concealed Hinges

Concealed Hinges Adjustment

Side Adjustment The side adjustment aligns the door with the side of the cabinet.

Rotate the appropriate screw

The side adjustment is made by rotating the screw on the hinge arm.

· T-type · S-type · B-type

Adjustment range

By temporarily loosening the fixing screw · *Wide Angle hinge

For the side adjustment: 1. Release the fixing screw 2. Make the necessary adjustment by rotating the appropriate screw 3. Tighten the fixing screw Without releasing the fixing screw no side adjustment is possible.

Adjustment range

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.17

Concealed Hinges Adjustment

Height Adjustment

-2 -2

-2 +2 +2 -2

+2 +2

· T-type with cam adjustable cruciform mounting plate

The height adjustment is made by rotating the cam adjuster on the mounting plate.

-2 -2

Rotate the cam adjuster

-2 -2

Height adjustment is necessary to achieve optimal vertical door position.

-2

· S-type with cam adjustable cruciform mounting plate

+2 +2

· T-type with cam adjustable linear mounting plate

2.18

Concealed Hinges -2

· T-type and S-type with cruciform mounting plate · B-type · *Wide Angle hinge

For height adjustment the two mounting plate fixing screws have to be temporarily released while making the manual adjustment. +2

Releasing the screw slot

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.19

Concealed Hinges Adjustment

Depth Adjustment The system enables easy adjustment of the gap between door and cabinet.

Rotating the cam adjuster

Rotate the cam adjuster on the hinge arm.

+4/-1 +4/-1

· T-type

+-/1.5

+2 +2

-2 -2

· S-type Plus

Release the fixing or adjustment screw · S-type · B-type

The depth adjustment is made by temporarily releasing the adjustment screw (S-type) or fixing screw (B-type, Hinge Ø40). After the adjustment is made the screw has to be re-tightened.

Adjustment range

2.20 +/-1.5+/-1.5

Most of Titus hinges can be combined with soft closing devices. > see page 2.71 for details

Concealed Hinges

Titus recommends!

Door Closing Type There are two door closing systems:

Concealed hinges with self-closing angle · T-type · S-type · B-type

Free-swinging door hinges*

self closing free swinging

The self-closing angle is the point from which the door will close by itself, without user assistance. The mechanism starts closing the door from a 14° to 25° angle, depending on the concealed hinge type. From that point to the maximum opening angle the door remains in an open position.

Optionally most of Titus concealed hinges can be supplied without the selfclosing mechanism. These hinges may be ordered upon request. Soft closing devices can not be used with freeswinging door hinges. * Available upon special request, speak to your Technical Sales Representative.

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.21

Concealed Hinges Adjustment

Adjustment of the damping force Damping Adjustment To decrease or to increase the damping ST-i ‘snap-on’ hinges force, change to position of the damping reduction switch. Theaction damping force is factory The damping can be adjusted to pre-set to maximum damping value. fit differentthe door weights and sizes which

Basic-i ‘slide-on’ hinges T-type Glissando

enables perfect door functioning. Damping is factory pre-set to Adjustment of the damping force the medium damping value.

ST-i ‘snap-on’ hinges Basic-i ‘slide-on’ hinges

The damping reduction Turn towards ‘+’ to increase and switch in a pre-set ‘-’increase to decrease damping. To decrease or to the the damping position

force, change to position of the damping reduction switch. The damping force is factory pre-set to the maximum damping value.

To decrease the damping force 1. Lift the damping activator. 2. Slide the damping reduction switch to opThe damping positereduction position. switch in a pre-set To decrease or to increase the damping, position

S-type-i Plus series S-type-i series B-type-i series

change the position of the damping 2 1 reduction switch. Hinges are factory pre-set to the maximum damping value.

To increase the damping force, slide the damping reduction switch back to the factory pre-set To decrease the damping forceposition. 1. Lift the damping activator. 2. Slide the damping reduction switch to opposite position.

The damping reduction switch adjusts the force of2 damping.1 Example shows the damping force change in case of To increase the damping force, slide the damptwo hinges on door. ing reduction switch back to the factory pre-set

Damping force change

position.

Damping force change

The damping reduction switch in a pre-set position.

To decrease the damping 1. Lift the damping activator. 2. S lide the damping reduction switch to opposite position.

The damping reduction switch adjusts the force of damping. Damping force change Example shows the The damping reduction switch damping force change in case of adjusts the damping. Example two hinges on door. shows the damping change in case of two hinges on door.

Hingetheset at the maximum damping va To increase damping, slide the damping reduction set the lowest damping value switchHinge back to theat factory pre-set position.

Hinge set at the maximum damping value Hinge set at the lowest damping value

Hinge set at the maximum damping value Hinge set at the lowest damping value 100% 100%

2.22

85%

70%

damping force

85%

70%

damp forc

Concealed Hinges

Titus damping solutions

Key Design Choices ‘ConfidentClose’ The hinge is designed to deliver consumer-preferred soft closing motion.

Key design choices Based onin results third party cup research Damping theof hinge

Damper is positioned transversal on the hinge cup Fast closing

'One-for-all' efficiency principle

Late start of

deceleration action · Allows for an easy and quick introduction of various hinge versions: ST ‘snap-on’ and Basic ‘slide-on’ with different hinge arm crankings and angles · Standard hinge cup drilling depths: requires no changes in drillings for hinge Positioning of damper transversal to the cup hinge cup allows for consistent damping · Standard mounting plates across hinge variations.

Quiet landing with ‘SoftTouch’

Universal mounting plate platform for both damped and non-damped hinges.

Adjustable damping force

Adjustable damping

Flexibility to 'tune' performance for all applications · Optimal damping on various door Flexibility to tune weights and sizesperformance for all applications. · Intuitive and quick adjustment · Easily accessible adjustment button · Consistent performance over a wide range of doors of different sizes and weights · Easy, accessible adjustment button for intuitive and quick adjustment Adjustable damping zone and force Adjustable damping zone and

Titus Damper inside

Titus hydraulic damper

force

· Efficient damping at any closing speed · Reliable closing · Damping force consistency Titus hydraulic damper, designed and produced in-house · Reliable and consistent life-long damping · Minimum damper rebounce · Dampers’ consistency over high volume production runs assured

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.23

T-type Glissando 110

For wooden doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Technical details

Cranking

Ø 35

Item number

701.0AT0.054.00 11.7 11.4

0mm K

701.0AT1.054.00

701.0AP1.054.00

701.0AT4.054.00

701.0AP4.054.00

42.5

26.1

65.4

Drilling patterns for hinge cups > see page 2.12

Made of steel Mounting plates Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

2.24

Hinge cup screws If not premounted

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Cover caps for hinge arm > see page 2.70

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Side adjustment +3/-1mm

18.5

S D

67.5

Mounting plate thickness table For further explanation > see page 2.8

Mounting plate drilling distance

27.5

19.6

F>Fmin

10.6

Depth adjustment +4/-1mm

For further explanation > see pages 2.17-2.20

For further explanation > see page 2.22

Mounting details

Height adjustment +2/-2mm

Concealed Hinges

Damping adjustment

F>2Fmin

Drawings show application on D=0mm thick mounting plate

D=13+K-x

Door clearance at R=1mm For further explanation > see page 2.8

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.25

T-type Glissando 110

For wooden doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Technical details

Cranking

Item number

701.0CT0.054.00

11.7 11.4

9mm

Ø 35

701.0CT1.054.00

701.0CP1.054.00

701.0CT4.054.00

701.0CP4.054.00

42.5

26.1

65.4

Drilling patterns for hinge cups > see page 2.12

Cranking

701.0DT0.054.00 11.7 11.4

17mm K

42.5

701.0DT1.054.00

701.0DP1.054.00

701.0DT4.054.00

701.0DP4.054.00

26.1

65.4

Drilling patterns for hinge cups > see page 2.12

Made of steel Mounting plates Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

2.26

Hinge cup screws If not premounted

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Cover caps for hinge arm > see page 2.70

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Side adjustment +3/-1mm

37 Z Z

F>2Fmin

67.5

27.5

Mounting plate thickness table For further explanation > see page 2.8

Mounting plate drilling distance

67.5

27.5

Depth adjustment +4/-1mm

For further explanation > see pages 2.17-2.20

For further explanation > see page 2.22

Mounting details

Height adjustment +2/-2mm

Concealed Hinges

Damping adjustment

X 19.6

37.5

37+V F>Fmin

29.6

29.6 V

68.6

D=4+K-x

68.6

37.5

Drawings show application on D=0mm thick mounting plate

19.6

F>Fmin

Drawings show application on D=2mm thick mounting plate

D= 4+K+F

Door clearance at R=1mm For further explanation > see page 2.8

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.27

T-type Glissando 110/45°

· · · ·

110°

45° angled application for wooden doors

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Technical details

Cranking

Item number

701.0B08.054.00

11.7 11.4

17mm

Ø 35

701.0C54.650.00

701.0C58.650.00

42.5

Drilling patterns for hinge cups > see page 2.12

65.4

26.1

Cup made of steel, arm made of zinc Mounting plates Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

2.28

Hinge cup screws If not premounted

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Cover caps for hinge arm > see page 2.70

Screw-on ready < screws

EasyFix system

Door adjustment

Side adjustment +3/-1mm

Mounting plate drilling distance

31.7

Mounting plate thickness table For further explanation > see page 2.8

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 2.17-2.20

For further explanation > see page 2.22

Mounting details

Height adjustment +2/-2mm

Concealed Hinges

Damping adjustment

0.5

67.6

1.5

2.5

3.5

K 45ยบ

12.5

Drawings show application on D=0mm thick mounting plate 31.7

0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 3

45ยบ

12.5

Drawings show application on D=0mm thick mounting plate

75.6

5 for for for for for

thickness thickness thickness thickness thickness

0 1

L=45 L=44 L=43 L=42 L=41

D=0 D=1 D=2 D=3 D=4

Door clearance at R=1mm For further explanation > see page 2.8

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.29

T-type Glissando 110/90°

· · · ·

110°

For wooden door cabinets with blind panels

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Technical details

17mm K

Item number

701.0A96.054.00

11.7 11.4

Cranking

Ø 35

701.0D36.054.00

701.0D40.650.00

701.0D30.650.00

701.0D34.650.00

42.5

26.1

65.4

Drilling patterns for hinge cups > see page 2.12

Cup made of steel, arm made of zinc Mounting plates Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

2.30

Hinge cup screws If not premounted

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Cover caps for hinge arm > see page 2.70

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

Damping adjustment

For further explanation > see pages 2.17-2.20

For further explanation > see page 2.22

Mounting details

Mounting plate drilling distance

52 21

F 21.5

Drawings show application on D=2mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 2.8

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.31

T-type 110

For wooden doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Technical details

Cranking

Item number

702.0AK1.054.00

702.0AM1.054.00

702.0AK4.054.00

702.0AM4.054.00

37.4

62.1

Item number

702.0AK0.054.00

11.7 3.2

0mm

Ø 35

Drilling patterns for hinge cups > see page 2.12

Made of steel Mounting plates

Hinge cup screws If not premounted

Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

3.8

Legend of hinge cup symbols

611.8K16.338.016

1,000 pcs

Cover caps for hinge arm > see page 2.70

Cam adjustable linear mounting plate > see page 2.44 Push latch > see page 2.68

2.32

Screw-on ready < screws

Machine insertion ready

EasyFix system

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

Concealed Hinges

Side adjustment +3/-1mm

For further explanation > see pages 2.17-2.20

18.5

Mounting plate thickness table For further explanation > see page 2.8

Mounting plate drilling distance

Mounting details

37 F>Fmin 10.6

67.5

8.5

Door adjustment

K F>Fmin

Drawings show application on D=0mm thick mounting plate

D=13+K-x

Soft closing systems Glissando TT > see page 2.82

Door clearance at R=1mm For further explanation > see page 2.8

V Glissando CR > see page 2.88

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.33

T-type 110

For wooden doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Technical details

Cranking

Item number

702.0CK0.054.00 11.7 3.2

9mm

702.0CK4.054.00

702.0CM4.054.00

702.0DK0.054.00 11.7 3.2

17mm

702.0DK1.054.00

702.0DM1.054.00

702.0DK4.054.00

702.0DM4.054.00

37.4

62.1

Drilling patterns for hinge cups > see page 2.12

Hinge cup screws If not premounted

Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

702.0CM1.054.00

Drilling patterns for hinge cups > see page 2.12

Cranking

Mounting plates

702.0CK1.054.00

37.4

62.1

3.8

Legend of hinge cup symbols

611.8K16.338.016

1,000 pcs

Cover caps for hinge arm > see page 2.70

Push latch > see page 2.68

2.34

Ø 35

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

Concealed Hinges

Side adjustment +3/-1mm

For further explanation > see pages 2.17-2.20

27.5

Mounting plate thickness table For further explanation > see page 2.8

Mounting plate drilling distance

Mounting details S 27.5

67.5

5 F>2Fmin

19.6 V

19.6

F>2Fmin

Drawings show application on D=0mm thick mounting plate

D=4+K.x V

D 37.5

68.6

37.5

37+V F>Fmin F>Fmin 29.6

29.6

V V

Drawings show application on D=2mm thick mounting plate

D=4+K+F

Soft closing systems Glissando TT > see page 2.82

Door clearance at R=1mm For further explanation > see page 2.8

V Glissando CR > see page 2.88

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.35

T-type 110/45°

45° angled application for wooden doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Technical details

Cranking

37.4

Item number

702.0C53.650.00

702.0C57.650.00

Drilling patterns for hinge cups > see page 2.12

62.1

Item number

702.0B07.054.00

11.7 3.2

17mm

Ø 35

Cup made of steel, arm made of zinc Mounting plates Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

2.36

Hinge cup screws If not premounted

Legend of hinge cup symbols

3.8 16

611.8K16.338.016 1,000 pcs

Cover caps for hinge arm > see page 2.70

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

Side adjustment +3/-1mm

For further explanation > see pages 2.17-2.20

Mounting plate drilling distance

Mounting details

31.7

Mounting plate thickness table For further explanation > see page 2.8

0.5

67.6

2.5

3.5

12.5

1.5

45ยบ

Drawings show application on D=0mm thick mounting plate

31.7

0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 2

75.6

K K

45ยบ V

12.5 Drawings show application on D=0mm thick mounting plate

L=45 L=44 L=43 L=42 L=41

for for for for for

thickness thickness thickness thickness thickness

D=0 D=1 D=2 D=3 D=4

Soft closing systems Glissando TT > see page 2.82

Door clearance at R=1mm For further explanation > see page 2.8

V Glissando CR > see page 2.88

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.37

T-type 110/90°

For wooden door cabinets with blind panels

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Technical details

Cranking

Ø 35

Item number

702.0A95.054.00 11.7 3.2

17mm K

702.0D35.650.00

702.0D39.650.00

702.0D29.650.00

702.0D33.650.00

37.4

62.1

Drilling patterns for hinge cups > see page 2.12

Cup made of steel, arm made of zinc Mounting plates Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

2.38

Hinge cup screws If not premounted

Legend of hinge cup symbols

3.8 16

611.8K16.338.016 1,000 pcs

Cover caps for hinge arm > see page 2.70

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

Side adjustment +3/-1mm

For further explanation > see pages 2.17-2.20

Mounting details

Mounting plate drilling distance

52 21

Drawings show application on D=2mm thick mounting plate

21.5

Drawings show application on D=2mm thick mounting plate

Soft closing systems Glissando TT > see page 2.82

Door clearance at R=1mm For further explanation > see page 2.8

V Glissando CR > see page 2.88

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.39

T-type 170

For wooden doors

· · · ·

170°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

165˚ 35mm 12mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Cranking

Ø 35

Item number

702.0EK0.054.00

0mm

702.0EK1.054.00

702.0EM1.054.00

702.0EK4.054.00

702.0EM4.054.00

Drilling patterns for hinge cups > see page 2.12

Cranking

702.0GK0.054.00*

9mm

702.0GK1.054.00* 702.0GK4.054.00* Drilling patterns for hinge cups > see page 2.12

Mounting plates Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

2.40

Hinge cup screws If not premounted

3.8

Legend of hinge cup symbols

611.8K16.338.016

1,000 pcs

Push latch > see page 2.68

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

Concealed Hinges

Side adjustment +3/-1mm

For further explanation > see pages 2.17-2.20

Mounting plate thickness table For further explanation > see page 2.8

Mounting plate drilling distance

Mounting details

15S

Drawings show application on D=0mm mounting plate In 90°position the door is only 1.4mm distant from side panel

7.6

F>2Fmin F>2Fmin

7.6

Drawings show application on D=0mm thick mounting plate

3 4

17 79 18

7.6

Drawings show application on D=0mm thick mounting plate

F>2Fmin

F>Fmin

F>Fmin F>Fmin

67 C

x 3

C C

x x

S D

D S

D=13+K-x

19 D

D S

61 61

-1.4

F>Fmin

D=13+K-x

Soft closing systems Glissando TL 170 > see page 2.86

Door clearance at R=1mm For further explanation > see page 2.8

V Glissando CR > see page 2.88

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0 Download supporting documentation from the Titus Tekform website titustekform.com.au

2.41

110 deg

T-type For Pie-cut Corner Cabinet · · · ·

For wooden doors

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

70˚ 35mm 11mm ‘3Way’ snap-on

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Corner Cabinet

Ø 35

Item number

721.0PK0.650.00 721.0PK4.650.00

721.0PM4.650.00

Drilling patterns for hinge cups > see page 2.12

Cup made of steel, arm made of zinc Mounting plates Cam adjustable cruciform mounting plate > see page 2.44

7.5

Cruciform mounting plate > see page 2.46

Accessories

Cam adjustable linear mounting plate > see page 2.44

2.42

Hinge cup screws If not premounted

3.8

Legend of hinge cup symbols

611.8K16.338.016

1,000 pcs

Push latch > see page 2.68

Screw-on ready < screws

EasyFix system

Side adjustment +2.5/-2.5mm

Height adjustment +2/-2mm

Depth adjustment +3/-1mm

For further explanation > see pages 2.17-2.20

Mounting plate drilling distance

Mounting details

Adjustments +3 -1 +2.5

-6 +6

-2.5

D=2

V=16-25mm K=3-6

The adjustment of the gap between two doors is done by rotating the adjustment screw as shown on the drawing Any T-type mounting plate can be used

70Â°

25Â°

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.43

Concealed Hinges

Door adjustment

T-type Mounting Plates

â&#x20AC;&#x2DC;3Wayâ&#x20AC;&#x2122; snap-on mounting

Drilling pattern

Dimensions

Cam Adjustable Cruciform Mounting Plate 37mm

57.2

Made of steel Cam Adjustable Linear Mounting Plate

65.2

32 19.9

Made of steel and zinc Fixing screw for cruciform mounting plate If not premounted

6.9

3.5 15

Chipboard screws

611.8K16.235.016 1,000 pcs

6.9

3.5 15

2.44

Height adjustment +2/-2mm

10.5 15

Mounting plate thickness (D)

Mounting plate type

Mounting plate thickness

Concealed Hinges

min 11.5

min 10.5

3.9

Ă&#x2DC;5

Item number

0mm

700.0KC0.054.00

700.0KA0.054.00

700.0KF0.054.00

2mm

700.0KC2.054.00

700.0KA2.054.00*

700.0KF2.054.00

3mm

700.0KC3.054.00

700.0KA3.054.00

700.0KF3.054.00

700.0LB0.054.00

700.0LF0.054.00

0mm 2mm

700.0LC2.650.00

700.0LB2.054.00

700.0LF2.054.00

3mm

700.0LC3.650.00

700.0LB3.054.00

700.0LF3.054.00

Ă&#x2DC;5

Legend of mounting plate type symbols

15 Premounted 15mm euro screws

10.5 Screw-on ready for chipboard screws < screws

Premounted 10.5mm expanding dowels

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.45

T-type Mounting Plates

â&#x20AC;&#x2DC;3Wayâ&#x20AC;&#x2122; snap-on mounting

Drilling pattern

Dimensions

Cruciform mounting plate 37mm

57.2

Made of steel

Fixing screw for cruciform mounting plate If not premounted

6.9

3.5 15

6.9

3.5 15

2.46

Chipboard screws

611.8K16.235.016 1,000 pcs

Height adjustment +2/-2mm

10.5 15

Mounting plate thickness (D)

Mounting plate type

Mounting plate thickness

Concealed Hinges

min 11.5

3.9

Item number

0mm

Ă&#x2DC;5

min 10.5

Item number

700.0NC0.054.00

700.0NF0.054.00

1mm

700.0NA1.054.00

2mm

700.0NA2.054.00

700.0NC2.054.00

700.0NF2.054.00

3mm

700.0NA3.054.00

700.0NC3.054.00

700.0NF3.054.00

Ă&#x2DC;5

Legend of mounting plate type symbols

15 Screw-on ready for chipboard screws < screws

Premounted 15mm euro screws

10.5 Premounted 10.5mm expanding dowels

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.47

S-type Plus 110

For wooden doors

110°

· Quick, comfortable and precise depth adjustment

Interaxis

45mm

48mm

52mm

5.5

52 6

9.5

Ø 35

Item number

Cranking

248.0T10.050

248.0T70.050

0mm

248.0T13.050

248.0T71.050

248.0T94.050

248.0T69.050

248.0T72.050

248.0T95.050

Ø 35 Cup type

Drilling patterns for hinge cups > see page 2.12

Made of steel Cranking

248.0V69.050

9mm

248.0V70.050 248.0V56.050 Drilling patterns for hinge cups > see page 2.12

Made of steel Mounting plates Cam adjustable mounting plate > see page 2.60

Steel mounting plates > see page 2.62

Zinc diecast mounting plates > see page 2.62

2.48

Hinge cup screws If not premounted

Legend of hinge cup symbols

611.8K16.338.016 7.5

3.8 16

1,000 pcs

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm Snap-on Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +1.5/-1.5mm

Concealed Hinges

· · · ·

For further explanation > see pages 2.17-2.20

Mounting plate drilling distance

Mounting details 17.8 17.8D D

4 3 2 1 0

K 37 37

F>Fmin F>Fmin

x x

13 14 15 16 17 1 18 3 3 2 1 0

S S

Mounting plate thickness table For further explanation > see page 2.8

3 2 1 1

Drawings show application on D=0mm thick mounting plate 26.7 S

26.7

63 37

4 3 2 1 0

K K

16 V

3 3 2 1 0

F>2Fmin x F>2Fmin

3 2 1 1

Drawings show application on D=0mm thick mounting plate

Soft closing systems

Accessories

Door clearance For further explanation > see page 2.8

Glissando TL > see page 2.84

Cover caps for hinge arm > see page 2.70

Glissando CR > see page 2.88

Push latch > see page 2.68

3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K

4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN

Gap ZMIN=0

Download supporting documentation from the Titus Tekform website titustekform.com.au

i Fm

16 17 18 19 20 1 21 22

2.49

S-type 110

For wooden doors

110°

uick and practical assembly of the hinge Q and mounting plate by pressing gently on the rear part of the hinge arm One button disassembly Interaxis

Interaxis

45mm

48mm

52mm

Ø 35

Ø 35 Cup type

Item number

52 6

9.5

5.5

· ·

Ø 35

Item number

Cranking

248.0538.050*

0mm

248.0400.050* 248.0366.050* Drilling patterns for hinge cups > see page 2.12

Made of steel Cranking

248.0536.050*

9mm 248.0482.050*

248.0539.050* 248.0327.050*

248.0401.050*

248.0545.050*

248.0549.050*

Drilling patterns for hinge cups > see page 2.12

Made of steel Cranking

248.0537.050*

15mm

248.0280.050*

248.0328.050*

248.0402.050*

248.0487.050*

248.0551.050*

Drilling patterns for hinge cups > see page 2.12

Made of steel Mounting plates Cam adjustable mounting plate > see page 2.60

Steel mounting plates > see page 2.62

Zinc diecast mounting plates > see page 2.62

2.50

Hinge cup screws If not premounted

7.5

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm Snap-on Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

· · · ·

For further explanation > see pages 2.17-2.20

Mounting plate drilling distance

Mounting details 17.8 D

17.8

K S S

35.7 35.7 16

63 37 37

z z

Drawings show application on D=0mm thick mounting plate

F>2Fmin 35.7

3 3 2 1 0 4 3 2 1 0 5 3 2 1 1

V 16 17 18 19 20 1 21

x 4 5 6 7 8 1 9

x F>2Fmin

Drawings show application on D=3mm thick mounting plate

37 63 37

K K

16 V

F>Fmin

26.7

D S

F>2Fmin

z x

26.7

F>Fmin

26.7

F>Fmin

x x

37 63

Drawings show application on D=0mm thick mounting plate

K K

x 13 14 15 16 17 1 18

17.8

S S

Mounting plate thickness table For further explanation > see page 2.8

F>Fmin F>Fmin

37+V 37+V

F>Fmin

37+V

3 2 2 2 3 3 1

4 3 3 3 5

25 25

Soft closing systems

Accessories

Door clearance For further explanation > see page 2.8

Glissando TL > see page 2.84

Cover caps for hinge arm > see page 2.70

Glissando CR > see page 2.88

Push latch > see page 2.68

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

Download supporting documentation from the Titus Tekform website titustekform.com.au

i Fm

2.51

S-type 110/45°

45° angled application for wooden doors

110° Interaxis

Interaxis

45mm

52mm 5.5

52 9.5

Ø 35 Cup type

Ø 35

Item number

Cranking

248.0285.050

18mm

248.0N20.050

Item number

248.0291.050

Drilling patterns for hinge cups > see page 2.12

Cup made of steel, arm made of zinc Mounting plates Cam adjustable mounting plate > see page 2.60

Steel mounting plates > see page 2.62

Zinc diecast mounting plates > see page 2.62

2.52

Hinge cup screws If not premounted

7.5

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Screw-on ready < screws

Machine insertion ready

Door adjustment

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm Snap-on Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

· · · ·

For further explanation > see pages 2.17-2.20

Mounting plate drilling distance

Mounting details

S D

Mounting plate thickness table For further explanation > see page 2.8

K 3 4 5

48 74.5

D=18

48 74.5

D=18

48 45

0 1 2

° V

63.5

Drawings show application on D=18mm thick mounting plate

Soft closing systems Glissando TL > see page 2.84

Accessories

Door clearance For further explanation > see page 2.8 Cover caps for hinge arm > see page 2.70

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

Download supporting documentation from the Titus Tekform website titustekform.com.au

i Fm

2.53

S-type 110/90°

For wooden door cabinets with blind panels

110° Interaxis

Interaxis

45mm

48mm

52mm

Item number

Cranking

248.0745.050

18mm

248.0N24.050

5.5

Ø 35

Item number

Ø 35 Cup type

52 6

9.5

248.0748.050 248.0N25.050

248.0L61.050

248.0Z81.050

Drilling patterns for hinge cups > see page 2.12

Cup made of steel, arm made of zinc Mounting plates Cam adjustable mounting plate > see page 2.60

Steel mounting plates > see page 2.62

Zinc diecast mounting plates > see page 2.62

2.54

Hinge cup screws If not premounted

7.5

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm Snap-on Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

· · · ·

For further explanation > see pages 2.17-2.20

Mounting plate drilling distance

Mounting details

63.5

3 V

min75

Drawings show application on D=3mm thick mounting plate

Drawings show application on D=0mm thick mounting plate

Soft closing systems Glissando TL > see page 2.84

Accessories

min75

Door clearance For further explanation > see page 2.8 Cover caps for hinge arm > see page 2.70

V 16 17 18 19 20 1 21 22 3 0.3 0.5 0.7 1.0 1.31 1.7 2.5 K 4 0.3 0.5 0.7 0.9 1.21 1.6 2.1 5 0.3 0.5 0.7 0.9 1.21 1.5 2.0 FMIN Gap ZMIN=0

Download supporting documentation from the Titus Tekform website titustekform.com.au

i Fm

2.55

S-type 170

For wooden doors

· E nables better access into cabinet interior due to the wider opening angle · Opening angle can be easily adjusted by rotating the appropriate screw on the hinge arm Interaxis

Interaxis

45mm

48mm

52mm

Ø 35

Item number

Ø 35 Cup type

Item number

Cranking

52 6

9.5

5.5

135°-165°

248.0R17.050

0mm

248.0M73.050

248.0R13.050

248.0M74.050

248.0S17.050

248.0S18.050

248.0S19.050

Drilling patterns for hinge cups > see page 2.12

Made of steel and zinc Mounting plates Cam adjustable mounting plate > see page 2.60

Steel mounting plates > see page 2.62

Zinc diecast mounting plates > see page 2.62

2.56

Hinge cup screws If not premounted

7.5

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Screw-on ready < screws

Machine insertion ready

EasyFix system

Door adjustment

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

135˚-165˚ 35mm 12mm Snap-on Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

· · · ·

For further explanation > see pages 2.17-2.20

37 C

19 7

67 C

X 10 11 12 13 14 1 15 16 17 18 19 20

Mounting plate thickness table For further explanation > see page 2.8

Mounting plate drilling distance

Mounting details

F>Fmin 7 90 °

F>Fmin

1.4

3 6 5 4 3 2 1

1 0

4 6 5 4 3 1

2 1 0

5 6 5 4 1

3 2 1 0

6 6 5 1

4 3 2 1 0

7 6 1

5 4 3 2 1 0 D

1.4

C value with D=0 mounting plates

Drawings show application on D=0mm mounting plate

In 90°position the door is only 1.4mm distant from side panel

Soft closing systems Glissando TL 170 > see page 2.86

Glissando CR > see page 2.88

K 3 4 5 6 7 C

-9.0 -8.1 -7.1 -6.1 -5.2

Door clearance For further explanation > see page 2.8

V 16 17 18 19 20 1 21 22 23 24 K

3 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0 4 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0 5 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 0.0

6 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 2.6

Accessories Push latch > see page 2.68

7 0.0 0.0 0.0 0.0 0.01 0.0 0.0 0.0 5.1 FMIN Gap ZMIN=0.5

Download supporting documentation from the Titus Tekform website titustekform.com.au

i Fm

2.57

110 deg

S-type for Pie-cut Corner Cabinet

For wooden doors

· S tandard drilling for hinge and mounting plate · Hinge integrated adjustment Interaxis

Interaxis

45mm

48mm

52mm

Ø 35

Ø 35 Cup type

Corner Cabinet

Item number

248.0U21.050

248.0U16.050 248.0Z20.050

Drilling patterns for hinge cups > see page 2.12

Cup made of steel, arm made of zinc

Cam adjustable mounting plate > see page 2.60

Steel mounting plates > see page 2.62

Zinc diecast mounting plates > see page 2.62

2.58

Hinge cup screws If not premounted

7.5

3.8 16

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Ø 35 Item number

248.0U22.050

Mounting plates

5.5

52 6

9.5

Screw-on ready < screws

Machine insertion ready

Door adjustment

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm Snap-on Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

For further explanation > see pages 2.17-2.20

Mounting details

Drilling details

Adjustments

V = 16 - 22 mm K = 3 - 5 mm

Any S-type-i mounting plate of thickness D=0 can be used

The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing +6

-2 11.5 +3 -1 +5

-1.5

D=3

Accessories Cover caps for hinge arm > see page 2.70

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.59

Concealed Hinges

· · · ·

S-type Mounting Plates

For all S-type concealed hinges

Drilling pattern

Dimensions

Cam Adjustable Mounting Plate

Made of steel

2.60

Ø6.3

Mounting plate thickness

Concealed Hinges

Height adjustment +/- 2mm

10.5

Mounting plate thickness (D)

Mounting plate type

Item number

0mm

244.0258.050

244.0270.050

2mm

244.0259.050

244.0271.050

3mm

244.0260.050

min 9.5

min 10.5

Ø5

Legend of mounting plate type symbols

13 Pre-mounted 13mm euro screws

10.5 Pre-mounted 10.5mm expanding dowels

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.61

S-type Mounting Plates

For all S-type concealed hinges

60 Drilling Pattern

Dimensions

Steel Mounting Plates

Made of steel Zinc Diecast Mounting Plates

Made of zinc Fixing screws for mounting plates If not pre-mounted

Ø8

Ø6.3

Ø8

Ø6.3

2.62

Euro screws

611.8E23.363.810 L=11 611.8E23.363.813 L=13

7.5

3.8 16

Chipboard screws

611.8K16.338.016 1000 pcs

Height adjustment +/- 2mm

Mounting plate type

Mounting plate thickness

Concealed Hinges

10.5

Item number

0mm

244.1136.050

244.0134.050

244.0P26.050

min 10

Mounting plate thickness (D)

min 10.5

Ø6.3

5.8

Ø5

1mm

244.0561.050

2mm

244.1138.050

244.0562.050

244.0V19.050

3mm

244.1139.050

244.0135.050

244.0P27.050

* Mounting plates with premounted 7.5mm expanding dowels available upon special request > see page 0.3

9mm

244.3651.650

244.0M33.650

Legend of mounting plate type symbols

13 Screw on ready for euro screws < screws, see previous page

Premounted 13mm euro screws

10.5 Premounted 10.5mm expanding dowels

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.63

B-type Hinge Ø35 - Shallow Cup

For wooden doors

37 V

11 C

Ø35

K C (mm) (mm) 3

4.5

5.5

6.5

7.5

Ø5

108° B

MOUNTING PLATE HEIGHT D

A B (mm) (mm)

11.5

2,5

1 Interaxis

3,5

45mm

4,5

5,5

MIN 12 mm

8 mm-acjustment 2 mm MIN = 6 mm

Cup type

Cranking

Mounting plate included.

108 °

Technical details

8.7

Made of steel Hinge cup screws If not premounted

3.8 16

2.64

24 38

Item number

926.0A26.050*

0mm

7.5

Ø35

21.5

Legend of hinge cup symbols

611.8K16.338.016 1,000 pcs

Screw-on ready < screws

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

108˚ 35mm 8.7mm Slide-on

Concealed Hinges

· · · ·

Mounting details

Mounting plate drilling distance

Mounting plate thickness table

14 3

Drawing show application on D=0mm thick mounting plate

Soft close systems Glissando CR 972-0X19 > see page 2.88

2 4

0 0

2 4

0 2

D=15+K-x

37 Mounting plate is ﬁxed with 2 Euro screws

Accessories Push Latch 915-0X19 > see page 2.68

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.65

Material

Width (mm)

Length (mm)

General Hinges

Finish

Item number

1mm Butt Hinge

Steel

Zinc Plated

610.8H40.401.500

1.6mm Butt Hinge

Steel

Zinc Plated

610.8H40.401.550

2.66

Length (mm)

Concealed Hinges

General Hinges

Finish

Item number

Electro Brass

610.8H40.404.000

Nickel Plated

610.8H40.404.100

Furniture Hinge with Solid Pin

Antique Brass

610.8H40.405.500

Bomber Hinge, 100mm Light Duty Double Action

Chrome Plated

610.8H40.407.960

Piano Hinge Coil

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.67

Push Latch

For wooden doors and drawers

push

Grey

push

Item number

Push Latch

Cross m. plate

915.0X59 >

381.K1

Linear m. plate

915.0X59 >

381.K2

915.0X59.381.K1*

+ 915.0X59.381.K2*

Push latch

+ Fixing screws for mounting plates

Euro screws 611.8E23.363.813

Ø 6.3

Ø8

1,000 pcs

Cross mounting plate

7.5 7.5

Linear mounting plate

4 1212

Chipboard screws 611.8K16.240.016 1,000 pcs

Made of steel and plastic Catches Catch with base plate

Catch

Knock-in pad

Self adhesive pad

Made of plastic

2.68

Catch

915.7102.380*

Catch with base plate

915.7110.380*

Knock-in pad

915.7109.050*

Self-adhesive pad

915.7105.050*

Works with standard concealed hinges and drawers Effortless opening with just a light touch Depth adjustment ensures reliable closing and consistent performance in cases of inaccurate drilling ‘Safety click’ feature for easy detachment of the mechanism from the mounting plate

Concealed Hinges

· · · ·

Drilling pattern

Dimensions

81.K1 Ø

81.K2

Minimum gap Minimum gap required required

32 22 37 Ø6

Depth adjustment +4.5 / -1mm

16.5

Ø5

Push latch works with standard hinges.

Ø6

Push latch works on drawer; the gap between the drawer and the cabinet side = min. 12 mm

Positioning

813

ews 016 Close to the ‘touch opening point’, on the side opposite to hinges

On the cabinet side gap between drawer and cabinet side = min 12mm

On the drawer bottom; in the middle of drawer

Ø10 19

pre-drilled hole Ø2 / 10 mm

9.5 12

Catch

Catch with base plate

Fixing of pad depends on the catch position

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.69

Cover Caps

For hinge arms

Titus recommends!

Material surface

Item number

Nickel plated

To improve appearance Titus recommends the use of hinge arm cover plates with all compatible concealed hinges.

S-type Titus

Steel

248.1646 >

050

T-type Titus

Steel

728.1286 >

054.00

Steel

728.1283 >

054.00

Plate type

Technical details

For hinge arm with Glissando

T-type

Made of steel

2.70

Generic

Concealed Soft Close Damping Hinges Systems

Glissando Soft Closing Systems

2.71

Soft Close Damping Systems Product Guide

Glissando for Concealed Hinges Add-on hinge soft closing solution Glissando TT Glissando TL Glissando TL 170

· Effortless silent and safe door closing · Fits the hinge’s standard drilling patterns · Easy retrofit installation · Adjustable to different door sizes and weights · Perfect door motion · Doesn’t occupy additional space inside the cabinet

Stand-alone door soft closing solution Glissando CR · Effortless silent and safe door closing · Easy retrofit installation · Adjustable to different door sizes and weights · Perfect door motion

2.72

Concealed Soft Close Damping Hinges Systems

Titusoft for Drawers Stand-alone drawer soft closing solution Titusoft WD for wooden drawers Titusoft MD for metal drawers

路 Effortless silent and safe door closing 路 Self closing and soft closing in single mechanism 路 Safe drawer closing 路 Easy retrofit installation

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.73

Glissando Soft Closing Range

How to Choose the Right Glissando Glissando TT Glissando TL Glissando TL 170 Glissando CR

Titus Glissando soft closing system is available for the whole range of hinge applications. The user can choose between add-on hinge or stand-alone solutions. Stand-alone door soft closing solution

Add-on hinge soft closing solutions Concealed hinges Glissando TT

Glissando TL

Glissando TL 170

Glissando CR

T-type 110

T-type 110/45째

T-type 110/90째

T-type 170

S-type plus 110

S-type 110

S-type 110/45째

S-type 110/90째

S-type 170 B-type 110

2.74

X X

Glissando TT ‘One-for-all’ T-type

· One item fits multiple applications · Same item can be used on all crankings and angled hinges · Adjustable damping enables perfect functioning on every door

· Designed to fit the concealed hinge cup · Toolless mounting · Suitable for different types of cabinets for kitchens, living rooms, bathrooms and other furniture

T-type 110 0mm

T-type 110 5mm

T-type 110 9mm

T-type 110 17mm

T-type 110/45° 17mm

T-type 110/90° 17mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.75

Concealed Soft Close Damping Hinges Systems

Glissando Application

972.0X19.

Beige

Glissando for Concealed Hinges Information

Grey

White

Item number

Technical details

350 380 330

*Fixing screw included in a set

How many Glissandos per Door Add-on hinge soft closing solution

Made of plastic

· Glissando TT · Glissando TL Mounting details · Glissando TL 170

For doors with 2 hinges, mount Glissando on the bottom hinge, or on the middle hinge for doors with 3 hinges.

Fixing S-type, B-type

T-type

Glissando

No. of hinges

Glissando

1-2

2-3

No. of Glissandos

Recommended number per door and positioning

1-2

No. of Glissandos

Recommended number per door and positioning

sando CR on he cabinet.

Stand-alone soft closing solution · Glissando CR

Recommended number per door and positioning Mount a CR on the hinged side of the cabinet on the top or bottom.

Glissando

No. of hinges

3+ 3 2

Tool-less adjustment Turn towards “+” to increase or towards “-” to decrease the damping force.

ation please contact our representative.

2.76

1-2

Recommended numberof per door and positioning The functioning Glissando CR

depends on the hinge’s closing force. A trial mounting is always recommended.

Concealed Soft Close Damping Hinges Systems

Titus Glissando soft closing devices cannot be used with free-swinging door hinges.

How to Mount Glissando Toolless mounting · Glissando TT · Glissando TT 170 · Glissando TL · Glissando TL 170

Simple toolless assembly: Insert Glissando into the holes on the hinge and press down with hand.

Screw-on into the cabinet corner · Glissando CR

The toolless snap-on version for reduced assembly time and flexibility of application; Glissando TT and TL can be mounted at any time after furniture assembly so can be offered as a retrofit option by the installer.

Glissando CR is mounted into the cabinet corner by using chipboard screws 20mm long. Glissando dampers’ discreet design enhances the look of the door and occupies minimal space in the cabinet interior.

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.77

Glissando for Concealed Hinges Information

How to Adjust Damping Add-on hinge soft closing solution · Glissando TT · Glissando TL · Glissando TL 170

Glissando features quarter turn adjustment to provide optimal closing speed for all door dimensions and weight.

The damping function can be adjusted to fit different door weights which enables: · Perfect door functioning · Use of the same type of Glissando for various doors

Adjustable damping zone

Stand-alone soft closing solution · Glissando CR

2.78

Turn towards '+' to increase or towards '-' to decrease the damping.

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Damping force

Flat characteristic of the curve illustrates the damping force during the soft closing action at defined speed. Flat characteristic of the curve illustrates the damping force during the soft closing action at defined speed.

Concealed Soft Close Damping Hinges Systems

Flat characteristic of the cur the damping force during th action at defined speed.

Stroke Stroke

Stroke

Titus Hydraulic Damper 18%

Efficient modularGlissando damper Simple toolless assembly: Insert Glissando into the holes Industry average design

7% Nominal value

on the hinge and press down Glissando damper with hand.

Glissando damper Industry average

-7%

Industry average

-18%

Deviation from nominal force Deviation from nominal force

Wide operating scope

Deviation from nominal force

· High coefficient F γ of Titus damper γ = H damping at any assures efficient FL closing speed at slam speed (12 mm/s) FH H -damping · Damping Fforce can force be easily adapted FL to customer needs F -damping force at slow speed (1 mm/s)

Damping force FH FL

FH - damping force at slam speed (12 mm/s)

F γ= H FL

FL - damping force at slow speed (1 mm/s)

FL - damping force at slow spe

FHStroke – damping force at slam speed (12mm/s) FL – damping force at slow speed (1mm/s)

Industry range

Stroke Automated control of Glissando components Glissando

Industry range

Reliable damping and closing at any speed

FH - damping force at slam spe

Components manufacture

Automated control of components Stroke

Precision γ= γ damper filling

Higher coefficient means reliable damping at high speed and ensures that the system will reach its final position even at very slow speed.γ means reliable Higher coe cient

7 6

damping at high speed and ensures that the system will reach its final position even coefficient γ means reliable γ at very slow speed.

Scrap rejectionIndustry range

Higher 100% damping atofhigh speed and ensuresSealing inspection 7 that the force andsystem stroke will reach its final 6

Lama damper 100%

Higher coe cient

means re

inspection damping of at high speed and the system will reach its fina force and stroke at very slow speed.

Titus damper

position even at very slow speed.

Industry range

3 Damping force

Flat characteristic of the cur the damping force during th action at defined speed. Flat characteristic of the curve illustrates the damping force during the soft closing action at defined speed.

Stroke

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.79

Glissando Soft Closing Systems for Hinges

‘ConfidentClose’

Toolless mounting

Adjustable damping

1) Fast closing 2) Late start of deceleration action 3) Quiet landing with ‘SoftTouch’

· Reduced assembly time · Flexible usage allows a retrofit installation option

· Consistent performance across a broad range of furniture doors of different dimensions and weights

2.80

Concealed Soft Close Damping Hinges Systems Easy toolless adjstment

‘One-for-all’

‘Titus Damper Inside’

· Intuitive adjustment procedure · Controllable motion

· One item fits multiple applications · Same item can be used on all crankings and angled hinges

· Titus proprietary multi-purpose damping technology · Reliable and consistent damping

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.81

Glissando TT Add-on Hinge Soft Closing Solution

For 110° hinges

Technical details

Glissando TT Snap-on · T-type 110

Made of steel and plastic

2.82

Hinge opening angle

110°

Item number

729.0K71.054.00

Adjustable damping zone

Concealed Soft Close Damping Hinges Systems

· Same item can be used on all crankings and angled hinges · Designed to fit the concealed hinge cup and requires no extra space inside the cabinet · Adjustable damping · Toolless mounting Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Mounting details

Toolless assembly

Insert Glissando TT into the holes on the hinge

Press down

Glissando

250

200

150

100 50

2 2

No additional drilling is required

Download supporting documentation from the Titus Tekform website titustekform.com.au

Recommended number per door and positioning

2.83

Glissando TL Add-on Hinge Soft Closing Solution

For 110° hinges

For the following cup types

Item number

110°

45N

951.0X94.050

110°

35N

951.0P59.050

66.2

67.6

Glissando TL Snap-on · S-type Plus 110 · S-type 110 · B-type 110

Damping force

Technical 28 details

Hinge opening angle

110°

43.5

Made of steel and plastic Legend of hinge cup symbols

Screw-on ready

2.84

Machine insertion ready

Premounted euro screws

Premounted chipboard screws

EasyFix system

Premounted expando dowels

Adjustable damping zone

Concealed Soft Close Damping Hinges Systems

Mounting details

Toolless assembly

Insert Glissando TL into the holes on the hinge

Press down

Glissando

250

200

150

100 50

2 2

No additional drilling is required

Download supporting documentation from the Titus Tekform website titustekform.com.au

Recommended number per door and positioning

2.85

Glissando TL 170 Add-on Hinge Soft Closing Solution

For the following cup types

Technical details

Glissando TL 170 snap-on

Hinge opening angle

For T-type 170, S-type 170 and B-type 170

Item number

110Â°

951.0F15.650

88.5

Box content 100 pcs soft closing mechanisms 100 pcs striking plates

Soft closing mechanism

12.4

52.5

Striking plate

Made of steel and plastic Legend of hinge cup symbols

Screw-on ready

2.86

Machine insertion ready

Premounted euro screws

Premounted chipboard screws

EasyFix system

Premounted expando dowels

· Gentle and reliable soft closing on doors with wider opening angle · Fits perfectly 45/9.5mm, 48/6mm and 52/5.5mm hinge cups · Furniture consumers’ preferred ‘ConfidentClose’ damping · Toolless mounting

Concealed Soft Close Damping Hinges Systems

Damping adjustment

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Mounting details Toolless mounting

Insert Glissando TL 170 into the holes on the hinge cup

Place the striking plate into the hole on the hinge arm

Press down

Glissando

250

200

150

100 50

2 2

Recommended number per door and positioning

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.87

Glissando CR Stand-alone Door Soft Closing System

Glissando CR for Full Overlay hinges

Nominal 11 (Adjustment: Nominal + 5mm)

Made of plastic

2.88

110Â°

0mm

972.0X19 >

*Fixing screw included in a set

350

380*

Beige

Grey

Item number

White

Cranking

Hinge opening angle

Technical details

For full overlay and half overlay concealed hinges

360*

Damping adjustment

Concealed Soft Close Damping Hinges Systems

· Intuitive ‘place and fix’ installation in the corner of the cabinet · Toolless damping adjustment · One item for a wide range of doors · Reliable performance Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Mounting details Glissando CR 35 Glissando CR

35 18

7 18 5°

Nominal 11 (Adjustment: Nominal + 5mm)

Mount Glissando CR on the hinged side of the cabinet

Glissando CR9 44 Further explanations > go to

Glissando CR9

http://www.youtube.com/watch?v=8-uWs_z2d0s

Nominal 10 (Adjustment: Nominal + 5mm)

One screw fixing

16,5

Nominal 10 (Adjustment: Nominal + 5mm) 16,5

Mount Glissando CR on the hinged side of the cabinet Further explanations > go to

One screw fixing

http://www.youtube.com/watch?v=8-uWs_z2d0s

cm The functioning of Glissando CR depends on the hinge’s closing force. A trial mounting is always recommended.

Glissando

250

200

150

100 50

2 2

Recommended number per door and positioning

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.89

Titusoft WD Soft Closing System for Wooden Doors

Technical details

Titusoft WD

Item number

Grey

For wooden drawers with roller runners

973.0X35 >

380

Set consists of: · Titusoft mechanism · Activator

40.5

Titusoft mechanism

6.5

192 Ø 6.5

Ø 3.2

Ø3

192

214

5 3.

6.5

Ø3

Ø3 .7

Ø 6.5

Ø 3.2 6,5

40.5

192

78 18

214

Ø3 10

Activator

6,5

.7 Ø3

3. 5

78 18

Made of plastic

2.90

Ø3

192

Capacity chart (kg)

· Works with most roller runner drawer slides · Easy, intuitive mounting · Smooth soft closing action independent of drawer hardware · Optimal closing speed · Non-handed design (mm)

Mount 1 or 2 Titusoft mechanisms depending on drawer weight and width

Mounting details

2. 2b

Fix with 2 screws L=20mm

Position the Titusoft mechanism on the top of the drawer slide

4. 4a

3a 4b

1. Rest the activator against the drawer front 2. Align the vertical position of the activator with the top of the Titusoft mechanism and mark the screw locations

Fix with 2 screws L=12mm

A trial mounting is always recommended. Please contact Titus Tekform for further technical assistance.

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.91

Concealed Soft Close Damping Hinges Systems

Titusoft MD Soft Closing System for Metal Box Drawers

Titusoft MD

Item number

Grey

For metal boxes

973.0X39 >

380

Set consists of: · Titusoft mechanism · Activator · Mounting jig

Titusoft mechanism

Activator

Mounting jig

Made of plastic Technical details Retrofit mounting

3.2

42.4

40.5

Ø4

213

40.5

6. 5

42.4

Ø4

225

2.92 192 213

Ø4

225

L 2

Capacity chart (kg)

· ‘One-for-all’ soft closing for single skin metal boxes · Allows for easy factory mounting or retrofit application · Intuitive positioning · Preserve the lifetime of the drawer (mm)

Mount 1 or 2 Titusoft mechanisms depending on drawer weight and width

3 1

Concealed Soft Close Damping Hinges Systems

Mounting details 2 1

L 2

Retrofit mounting

2. 1

5 4.

3 5 1

L 2

For retrofit mounting

Factory mounting

For factory mounting

97.5

5 8.8

103.5

Marked line

130

13.5

Marked line

18.5

192

9 5

A trial mounting is always recommended. Please contact Titus Tekform for further technical assistance.

Download supporting documentation from the Titus Tekform website titustekform.com.au

2.93

Furniture Fittings

Furniture Fittings Product Guide

Overhead Solutions Page

AeroBus Opening System

3.4

AeroFlap Opening System

3.6

AeroLoft Opening System

3.8

AeroSplit Opening System

3.10

AeroPlus Opening System

3.12

Lift-up Mechanisms

3.14

Titus Connectors Information

3.17

System 3 Fittings for face and edge boring

3.19

System 4 Fittings for face boring only

3.21

System 5 Cams and dowels

3.24

System 6 Quickfit-Expando connectors

3.44

System 7 High strength connectors

3.53

Cabinet and Furniture Legs

3.2

Titus Adjustable Cabinet Legs

3.57

Decorative Furniture Legs

3.61

Fastmount® Panel Mounting Information

3.64

Standard Profile Range

3.65

Low Profile Range

3.71

Very Low Profile Range

3.75

Metal Profile Range

3.78

Panel Control Range

3.81

Textile Range

3.82

Installation Tools

3.84

SuperGroove® Adhesive

3.85

3.3

Overhead Solutions AeroBus Opening System • • • • •

Easy assembly with click-on door fixing No hinges or stabilisation bars required SlowMotion technology for controlled and silent closing Compact, non-invasive slim housing 3-Way vertical and horizontal adjustment with door weight adjustment

AeroBus Kit for Doors

Weight (kg)

Item number

1.0 - 5.5

606.8L03.020.000

2.4 - 12.3

606.8L03.040.000

Kit includes: •

•

Made of plastic and steel

Choosing the Correct AeroBus System • • •

Door height max. 400mm Door width max. depends on the kit’s load capacity Choose from 2 kits depending on height and weight requirements

Door Height (mm)

606.8L03.020.000

606.8L03.040.000

400

1.0 - 2.5kg

2.4 - 5.5kg

350

1.1 - 2.9kg

2.7 - 6.3kg

300

1.3 - 3.5kg

3.2 - 7.4kg

250

1.6 - 4.0kg

3.8 - 8.9kg

200

2.0 - 5.0kg

4.8 - 11.0kg

180

2.2 - 5.5kg

5.3 - 12.3kg

3.4

Symmetrical and dampened mechanisms (2 pcs) Linear mounting plates for the door fixing (2 pcs)

•

Ø4 x 15mm screws (6 pcs)

•

Ø4 x 35mm screws (8 pcs)

•

Covers: right and left (2 pcs)

Overhead Solutions

Overhead Solutions AeroBus Opening System

Application Cabinet Fixing

max 22

T 5 min.

159

Ø5

10 7°

T = Ø5mm x min. 5mm deep T = pilot holes F = fixing holes

min. 150

55 "T"

153.5

max. 22

00m

107 137

ax 4

H (m

127

28.5

max 22 78-A

78-A

Door Fixing

12.5

Adjustments Door Adjustment

+/-1.

-2

+2 -2

Damper Strength Adjustment

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.5

Overhead Solutions AeroFlap Opening System • •

Door moves above cabinet opening Perfect pause in every opening position 30 adjustments for door positioning SlowMotion technology for controlled and silent closing

Door weight (kg)

•

Door height (mm)

•

Item number

450

4.8-5.7

606.8L09.010.660

600

4.4-5.2

660

4.0-4.7

450

5.8-7.3

600

5.3-6.7

660

4.8-6.2

450

7.4-9.2

600

6.8-8.4

660

6.3-7.9

450

9.3-10.8

600

8.5-9.9

660

8.0-9.3

450

10.9-14.5

600

10.0-13.0

660

9.4-11.8

720

7.9-9.3

800

7.7-8.9

720

9.5-12.0

800

9.0-11.4

606.8L09.020.660

606.8L09.030.660

606.8L09.040.660

606.8L09.050.660

606.8L09.130.800

606.8L09.140.800

Stabilisation bar, 1200mm > Order separately 606.8L09.150.200

Kit includes: 2 mechanisms, RH & LH 2 dampers for mechanisms 2 covers, RH & LH 14 Euro screws, Ø6 x 12mm 12 self-tapping screws, Ø4 x 35mm Assembly instructions • • • • • •

3.6

Overhead Solutions

Overhead Solutions AeroFlap Opening System

Application

Cabinet Fixing

Door Fixing

Adjustments Door Adjustment

Weight Adjustment

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.7

Overhead Solutions AeroLoft Opening System •

•

Compact & non-invasive system Easy mounting on the cabinet and rapid fixing on the door with a ‘click’ and without hinges SlowMotion technology for a controlled and silent closing 3-Way vertical and horizontal adjustment with door weight adjustment

Door weight (kg)

•

Door height (mm)

•

Item number

380-500

4.8-6.0

606.8L09.210.500

450-580

4.7-5.9

606.8L09.250.250

450-580

6.0-7.6

606.8L09.310.058

450-580

7.7-9.2

606.8L09.320.058

Kit includes: 2 mechanisms, RH & LH 2 dampers for mechanisms 2 covers, RH & LH 14 Euro screws, Ø6x12mm 12 self-tapping screws, Ø4x35mm Assembly instructions • • • • • •

Stabilisation bar, 1200mm > Order separately 606.8L09.150.020

3.8

Overhead Solutions

Overhead Solutions AeroLoft Opening System

Application

Cabinet Fixing

Door Fixing

Adjustments Door Adjustment

Weight Adjustment

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.9

Overhead Solutions AeroSplit Opening System • • • •

Door bi-folds up 125° folding door opening operation, ensuring the second half of the door folds extremely flat Anti-pinch central hinge for safe functioning No stabilisation bar required Perfect pause in every position SlowMotion technology for controlled and silent closing

Door weight (kg)

•

Door height (mm)

•

Item number

600

6.8-8.1

606.8L09.510.060

600

8.2-10.0

606.8L09.520.060

720

6.6-8.7

606.8L09.610.072

720

8.8-11.0

606.8L09.620.072

720

11.1-13.3

606.8L09.630.072

800

10.1-12.5

606.8L09.730.080

800

12.6-13.5

606.8L09.740.080

Kit includes: 2 mechanisms, RH & LH 2 dampers for mechanisms 2 covers, RH & LH 14 Euro screws, Ø6 x 12mm 12 self-tapping screws, Ø4 x 35mm Assembly instructions • • • • • •

Note: Hinge 110° not included

3.10

Overhead Solutions

Overhead Solutions AeroSplit Opening System

Application Application 125°: Cabinet Fixing

Door Fixing

Application 110°: Cabinet Fixing

Door Fixing

Adjustments Weight Adjustment

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.11

Overhead Solutions AeroPlus Opening System • • • • • •

Upwards operation Symmetrical mechanism for smart assembly Adjustable for doors up to 20kg Perfect stay in all positions 32mm standard cabinet drilling Combine with soft close hinges for smooth operation

Item number

606.8L09.900.110 Kit includes: 1 AeroPlus joint 1 cover cap 1 bracket for cabinet 1 bracket for wooden door Assembly instructions • • • • •

Note: Hinge 110° not included

180

175

90 F1

3.12

• Upwards operation • Symmetrical mechanism for a smart assembly • Adjustable for doors up to 20kg weight • Perfect stay in every position • 32mm standard cabinet drilling • Combined with SlowMotion hinges, it confers a perfect movement to the door

Description

Packing

59.0VPL05.00.00000

Kit AeroPlus

15 kits

Packed in a kit, consists of: • 1 joint Aeroplus • 1 cover cap • 1 bracket for cabinet • 1 bracket for wooden door

• 4 selftapping screws Ø4x16 mm • 1 SW10 key • Assembly instructions

AeroPlus

175

Technical specifications:

2~4

3,5~7,5

6,5~11,5

500

1,5~3

3~6

5,5~9,5

8,5~15 7~12

600

1,5~2,5

2,5-5

4,5~7,5

6~10

Description

Packing

59.0VPL05.00.00000

Kit AeroPlus

15 kits

Packed in a kit, consists of: • 1 joint Aeroplus • 1 cover cap • 1 bracket for cabinet • 1 bracket for wooden door

200

• 4 selftapping screws Ø4x16 mm • 1 SW10 key 135 • Assembly instructions

205

5,5~9,5

7~12

4,5~7,5

6~10

1-2-3

300

3~5

400 500 600

1,5~2,5

4-5-6

7-8-9

10-11-12

5~10

9~15,5

11~20

2~4

3,5~7,5

6,5~11,5

8,5~15

1,5~3

3~6

5,5~9,5

7~12

2,5-5

4,5~7,5

6~10

180

11~20 8,5~15

Door height

Values given in mm

9~15,5 6,5~11,5

F4 10-11-12

Door weight adjustment (kg) ° 110

7-8-9

175

180

ht adjustment (kg)

180

175

Code

Overhead Solutions

180

400

• 4 selftapping screws Ø4x16 mm • 1 SW10 key • Assembly instructions

11~20

15 kits

10-11-12

AeroPlus

Packing

Application

• Upwards operation • Symmetrical mechanism for a smart assembly • Adjustable for doors up to 20kg weight Door weight adjustment (kg) • Perfect stay in every position F1 F2 F3 Door • 32mm standard cabinet drilling height 1-2-3 4-5-6 7-8-9 • Combined with SlowMotion hinges, it confers a perfect movement 300 3~5 5~10 9~15,5 to the door

cription

135

FORMENTI & GIOVENZANA S.p.A. Via Concordia, 16 20837 Veduggio con Colzano (MB) - ITALY Tel. +39 0362 947.1 r.a. - Fax +39 0362 998788 info@fgv.it - www.fgv.it

200

EN 04.2017

135

205

180

° 110

200

180

205

° 110

Code

Overhead Solutions AeroPlus Opening System

Values given in mm

Adjustments Door Adjustment (kgs) FORMENTI & GIOVENZANA S.p.A.

Door Via Concordia, 16 20837 Veduggio con Colzano (MB) -Height ITALY Tel. +39 0362 947.1 r.a. - Fax +39 0362 998788 300 info@fgv.it - www.fgv.it

FORMENTI & GIOVENZANA S.p.A. Via Concordia, 16 20837 Veduggio con Colzano (MB) - ITALY Tel. +39 0362 947.1 r.a. - Fax +39 0362 998788 info@fgv.it - www.fgv.it

EN 04.2017

Values given in mm

F1 1-2-3

F2 4-5-6

F3 7-8-9

F4 10-11-12

3-5

5 - 10

9 -EN 15.5 04.2017

11 - 20

400

2-4

3.5 - 7.5

6.5 - 11.5

8.5 - 15

500

1.5 - 3

3-6

5.5 - 9.5

7 - 12

600

1.5 - 2.5

2.5 - 5

4.5 - 7.5

6 - 10

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.13

Gas Strut

Minimum internal cabinet height 264mm

606.8L03.300

•

606.8L03.287

000

Lift-up overhead stay with easy operation and variable opening angle of 75°. No concealed hinges required on top panel. Spring strength of 180N

Flap Stay with Catch

225

605.8A20.225

Klok XL Flap Stay

Minimum door height 300mm Maximum door height 700mm Maximum door opening angle 105°

606.8L03.001

•

287

Gas Strut suitable for weights up to 12kg

Lift-up Stay •

001

000

Klok XL Flap Stay complete with carcase bracket and door bracket for wood

Details on how many flap stays are required depending on door height, weight and desired opening angle > see page 3.15

3.14

Chrome

Item number

White

Dimensions (mm)

Silver

Overhead Solutions Lift-up Mechanisms

Choosing the Correct Quantity of Klok XL Flap Stays To keep the door opening in any position, the number of Klok XL flap stays to use must be calculated according to the door weight, the door height and the maximum opening angle desired.

Door weight and maximum opening angle 75° 2kg

3kg

4kg

5kg

6kg

7kg

8kg

9kg

10kg

11kg

12kg

Door height (mm) 300

350

400

450

500

550

600

650

700

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

75°

90°

105°

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.15

Overhead Solutions

Overhead Solutions Klok XL Flap Stay

Titus Connectors

3.16

Connectors

Why Choose Titus Connectors Titus connectors add value to furniture and to furniture manufacturing

Titus connectors improve the quality of furniture and lower the cost of manufacturing and assembly while ensuring a high degree of customer satisfaction.

The most advanced range of connectors available on the market

Precise and efficient product design. The broadest possible range of drilling tolerances ensures reliable assembly and consistently strong joints. Klix locking feature, the engagement of interlocking teeth on cam and dowel, to prevent joint loosening in service or transit. Expanding function provides degrees of variation in out-of-tolerance drillings ensuring stronger joints and improved quality of furniture. Twinstart thread for faster and more stable insertion. Depth stop collar prevents over-insertion. Firm tightening for greater confidence in use. Cam locks at 230° ensuring a smooth tightening action and greater dowel pull-up.

Quickfit for hand dowel insertion. Quickfit TL2, TL4 with the built-in self adjustment feature is the only available dowel that allows for pre-insertion. Quickloc one-piece fitting for faster assembly with integrated expanding cam and dowel. Zinc+steel dowel for optimal strength and performance. Precise dowel manufacturing high precision of zinc and strength of steel assures 100% dimensional accuracy.

Easy and quick consumer friendly self-assembly of furniture

Self-assembly furniture offers consumers good value and instant availability of products.

Titus connectors provide consumers with easy assembly, and furniture producers with increased productivity through: Reduced number of assembly parts Easy assembly instructions Security of packed parts during transit

With the aim of providing consumers with simpler instructions, fewer parts and an easier assembly process, Titus has significantly reduced and simplified the number of fittings traditionally required in furniture production.

Download supporting documentation from the Titus Tekform website titustekform.com.au

• • •

3.17

Connectors Information

Easy and Quick Furniture Assembly CAF formula

CAF = Consumer Assembly Friendliness Titus CAF formula provides a comparative measure for customer satisfaction. By using it, manufacturers are able to evaluate their products internally or against those of their competitors. While offering consumers easier and faster assembly, there are obvious advantages also for furniture manufacturers â&#x20AC;&#x201C; buying, counting, bagging and stocking of fittings can be greatly reduced.

How does it work?

3.18

Comparative CAF scores to assemble a hand held demonstrator:

CAF

Connecting screw (traditional assembly)

126

Cam & dowel with single start thread

108

Cam & dowel with twinstart thread

Cam & TL2 dowel (self-assembly)

Cam & TL2 dowel (factory pre-inserted)

Quickloc

Fully assembled demonstrator

System Features Titus System 3 is a two component rigid face and edge drilled fastening with half turn to fasten. System 3 offers almost full concealment and wide tolerances in use.

• •

•

• •

•

Download supporting documentation from the Titus Tekform website titustekform.com.au

Automatic or in-factory placement Pre-located pin ensures ease of assembly Less than one turn of a screwdriver to fasten Shelf edge installation of pin means maximum shelf cut size tolerance Can be used on 12mm shelf panels No loose parts for maximum convenience in RTA Drawer front fixing, cabinet construction

3.19

Connectors

System 3 Fittings for Face and Edge Boring

System 3 Fittings for Face and Edge Boring Concealed Housing

•

• • •

One turn locking system reduces assembly time, both in the factory and home Pre-assembly feature for consumer convenience Choice of dowels to suit drilling Hi-Lo screw feature for faster insertion

Drilling depth (mm)

Drilling diameter for dowel thread (mm)

3180 POZIDRIVE

Drilling length for dowel (mm)

3168

Housing Assembly

Technical and mounting details H 12

Ø25 x D

Y X

(Y=9.5 MAX)

X-Y+7

3121 3118 3180 POZIDRIVE

•

Item number

12.5

03118

835

03121

835*

White

Yellow passivate

3168

Zinc plated

H 3121 3180 3118 POZIDRIVE

Black

3168

877

Other colours on request

X, Y - depends on board thickness 3118

Ø25 x D Ø5 x 30

Screw Dowel Ø5

YY XX

X-Y+7 X-Y+7 X-Y+7

Ø25 x ØD2 D Ø5 x x30C

03168

883

(Y=9.5 MAX) (Y=9.5 (Y=9.5 MAX) MAX)

Made of plastic and zinc XX

X-Y+7 X-Y+7

(Y=9.5 MAX) MAX) (Y=9.5

3121

X-Y+7

ØD2 x C

3.75

03181

881*

03180

881*

03150

(Y=9.5 MAX)

Y Y

Ø5 x 30

Made of steel

Screw Dowel Ø3

X-Y+7 X-Y+7

ØD2 x C

(Y=9.5 (Y=9.5 MAX)MAX)

X, Y - depends on board thickness

X, Y - depends on board thickness Made of steel Cover Cap •

Made of plastic

3.20

Other colours on request

835

877

System Features Cost effective one-piece fittings with face-boring benefits:

• • • • •

•

Quickloc™ One-piece Connector

The integrated housing and dowel make Quickloc™ the most user-friendly and tolerant product available.

• • • •

Quickloc™ Assembly

1. Press Quickloc into the face board

Flush and block components Face-boring only Good tolerances One-piece connectors Angledrive versions fasten with maximum driving power and flexibility Quickloc™ versions need only one turn to tighten for fast assembly Foolproof consumer home insertion

High degree of drilling tolerance Push-in design Toolless insertion Integrated expanding housing and dowel provide consistently stronger joints

2. Assemble the panels

3. Tighten in less than one turn

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.21

Connectors

System 4 Fittings for Face Boring Only

System 4 Quickloc™ One-piece Expanding Connector

An innovative, one-piece connector, capable of hand insertion Is highly tolerant and tightens in less than one turn Is a face-bored product Offers a high degree of drilling tolerance and is the only connector of its type to provide pull-up of cabinet panels when tightened

•

• •

6803

Ø8

9.5 22

Ø20

22 4.5

Ø8

Quickloc Ø20 Flanged 4.5

9.5

Ø20

Ø8

9.5

06803

831* 835* 877*

06806

831

Ø20

6813

Ø8

Technical and mounting details

6803

Item number

10 9.5

White

6803

Black

Ø8

9.5

Dark brown

6803

4.5 Ø19.6

Ø8

6806

10 9.5 11.5

Ø20

Ø8

Made of plastic and zinc

4.5 Ø19.6 10

Ø8

Quickloc Ø20 Flush 6806

11.5

Ø8

6806

Ø19.6 6.5

6839 Ø20

Ø8

9.5

6839

06839

831* 835* 877

Made of plastic and zinc

Ø8

Ø10

A 1

10.5

9.5 A

831* 835* 877*

10 9.5

Quickloc Ø25 Flush

Ø25 Ø10

6.5

Ø10

13 12

12.2

Made of plastic and zinc

3.22

06813

Ø8 Ø10

Ø10

12.2

Ø8

Ø25

6.5 11

Ø10

A 1

11.5

Ø20

6.5

Other colours on request

Ø8

Ø20

877

Made of plastic and zinc

Ø25 9.5

10.5

6.5

11.5

Ø10

12 Flanged Quickloc6806 Ø25

6813

Ø25

•

Ø20

Ø19.6

9.5

835

Ø10

System 4 Fittings for Face Boring Only Minibloc™ / Twinbloc™

One-piece connector range Face drilling only required Easy to use, foolproof home insertion Angledrive screw tolerates good levels of inaccurate drilling, increasing consumer confidence

• • • •

ASSEMBLY ASSEMBLY 17 17 14 14

21072107

21202120

Connectors

16 16

10.510.5

Minibloc Ø10

Technical and mounting details 1717 17

16 14 14 14

2107

02107

831* 835* 861* 877*

2120

11 17

16 16 16

thumped 00220022thumped

16 16

14 14 14

2141 2141 10.5 32

11ASSEMBLY ASSEMBLY

14 13 13 6 9.5 9.5 6

17 17

Ø10 Ø10

Ø10 x D Ø8 x 13 Ø10 x D Ø8 x D

10 10 10.5 278.4129 278.4129 10.5 10.5 12 12 6 6 10.5 10.5

17 17 17

Ø5 xx13 Ø10 D Ø5 x 10.5 Ø8 xxDD Ø10 Ø10 Ø10 x 11

2130 2130 2130

2144 2144 2144 2139 2139

17 17 17

xx10.5 Ø510 13 278.4129Ø5 Ø106x xD11 Ø8 14 14 14 0021 0021 unthumped unthumped Ø10 Ø10 Ø6 Ø6 6 15.5 19thumped 21.5 0022 0022 thumped 14.5 14.5

32 32 32

Ø3 Ø3

11 Ø10 11

10.5 10.5 10.5

colours on request

Made of plastic and zinc 9.5

Twinbloc Ø10

Ø6

14.5

32 32

Ø8.2 Ø8.2 Ø8.2 Ø10.5 Ø10.5

835* 861* 877*

17 17

10.5 10.5 10.5

10.5 10.5

11 11 11

13 13 13 unthumped 0021 14 14 thumped 0022 66

2141 2141 2141

02141

• 2144 2144 Other

Ø8.2 Ø8.2

16 16 16

11 2120 2120 2120 2139

15.515.5

19 21.521.5 Ø10.5 Ø10.5 Ø10.519 Ø10.5 2130 2130

2120 2120

14.514.5

17 17 17

16 16 16

2107 2107 2107

Ø6 Ø6

Made of plastic and 11 zincASSEMBLY

Ø10.5 Ø10.5

2130

Other colours on request

2144

Ø10 Ø10

10.5 10.5

•

ASSEMBLY ASSEMBLY

Ø5 x 10.5 Ø10 x D

17 17

14 14 6 2107 2107 00210021unthumped unthumped 10.5 Ø8.2

831* 835* 861* 877*

^Assembly with screw

32 32 Ø10.5 Ø10.5 Ø10.5

2141

2139 112139^02120 >

10.5

10.510.5

Minibloc Ø8

ASSEMBLY

White

Ø8.2Ø8.2

Silver

10.510.5

21302130

Item number

21442144

Black

13 13

21412141

Dark brown

17 17

16 16

Drilling depth (mm)

Ø10.5 Ø10.5

Ø10.5 Ø10.5 Ø10.5

02130

835* 861* 877*

Ø3

2139 2139 2139

^02139

835*

877*

^Assembly with screw

11 Ø10 Ø10

•

Other colours on request

9.5 9.5

Ø5 x 10.5 10 10 278.4129 278.4129 Ø10 x 11 12 12 66 6 0021 unthumped 0021 Ø10 0021 unthumped unthumped Ø10 Ø10 19 19 21.5 21.5 thumped 0022 thumped

0022 0022

thumped

Ø6 Ø6 Ø6 15.5 15.5

Ø3 Ø3

14.5 14.5 14.5

Ø10 Ø10 Ø10 9.59.5 9.5 Made of plastic 10 10 10 278.4129 278.4129 278.4129 12 12 12 6 6 6 21.5 21.5 21.5

19 19 19

and zinc 15.5 15.5 15.5

Ø3 Ø3 Ø3

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.23

System 5 Cams and Dowels

System Features The most advanced cam and dowel range

Titus System 5 is a comprehensive range of cam and dowel connecting fittings with ‘Klix’ and Quickfit features for all cabinet applications: panel-to-panel, panel-to-hollow profile and back-to-back

Dowels •

•

Titus ‘Klix’™

Titus ‘Klix’ locking system ensures the engagement of the interlocking teeth on cam and dowel, providing: Vibration-proof joint Rigid construction that will not loosen in service or transit • •

Dowel insertion time comparison

2 o'clock lock smooth closing

3.24

•

uickfit TL5, 'Full metal jacket' Q Toolless insertion technology for Ø5mm dowel holes Quickfit TL2, TL4, TL5 dowels A unique solution for factory pre-insertion, high level of drilling tolerances

Quickfit dowel 1 Second

•

Twin start thread Combi dowel 4 Seconds

Single start thread Standard dowel 7 Seconds

Linear cam profile assures smooth, firm tightening action and greater pull-up. The cam always locks at 2 o'clock lock (230°), enabling greater consumer confidence in use while improving furniture quality.

Quickfit dowels Quick hand insertion, easy assembly Diecast dowels (zinc) Precise manufacturing, optimal shape and design Turned dowels (steel) ‘Traditional’ design, smooth surface and best strength performance Combi dowels (zinc and steel) High precision of zinc, strength of steel, 100% dimensional accuracy and optimal performance

erance range ervallo di tolleranza

min.23(27/33) ETHC

Connectors

max.25(29/35) ETHC

Tolerance range

Optimal performance and perfect joint Intervallo di tolleranza even with inaccurate drillings.

Drilling tolerances

Typical ETHC (EDGE TO HOLE CENTRE) measurements

Zinc/Combi dowel

18 16

Number of Occurences

Tolerance range

Number of Occurences

min.23.5 (33.5) ETHC

max.24.5(34.5) ETHC

max.25 + / - 0.5 mmETHC

14 12 10 8 6 4 2

Tolerance range Intervallo di tolleranza

0 Series1

±1 mm

+/-0.5mm

Tolerance range Intervallo di tolleranza

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

18 16

min. ETH

14 12 10 8 6 4 2 0

23,0

23,1

23,2

23,3

Series1

ETHC

measurements

14 max.25(29/35) 12 ETHC

min.23(27/33) ETHC

+ / - 0.5 mm

10 8 6 4

Tolerance range Tolerance range Intervallo di tolleranza

2 0

16 14

+ / - 1 mm

12 10 8 6 4 2

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

Series1

0 Series1

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

Quickfit TL4 dowel

+/-1mm

max.24.5(34.5) ETHC

8 6 4 2 0

Series1

±1 mm

18 16

14 max.25 ETHC 12 10

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

max.25 ETHC

min.23.5 (33.5) ETHC

8 6 4

0 Series1

23,0

23,1

23,2

23,3

Tolerance range Tolerance range Intervallo di tolleranza

18 16 14

±1 mm

+ / - 1 mm

min.23 ETHC

8 6 4 2

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC=Edge To Hole Center ETHC

Tolerance range Intervallo di tolleranza

Dowels for factory insertion

min.23 ETHC

+ / - 1 mm

2 23,0

measurements 20

Number of Occurences

min.23.5 (33.5) + / - 0.5 mm ETHC

Number of Occurences

Quickfit TL4

+/-1mm

measurements

ETHC

Quickfit TL2/TL3

Typical ETHC (EDGE TO HOLE CENTRE) measurements

0 Series1

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

Tolerance range Intervallo di tolleranza

ETHC

Quickfit TL5, Quickfit TL2 and Quickfit TL4 are the only available dowels that allow for factory pre-insertion, enabling: • • •

Easier packing Less damages in handling Perfect for the RTA market

Download supporting documentation from the Titus Tekform website titustekform.com.au

16 14 12 10 8 6 4 2

23,0

ETHC

Number of Occurences

Tolerance range Intervallo di tolleranza

Number of Occurences

+/-1mm

Quickfit TL2/TL5

Typical ETHC (EDGE TO HOLE CENTRE) measurements

20 min.23(27/33) 18 ETHC

Number of Occurences

Quickfit TL5 dowel Quickfit TL2 dowel

max.25(29/35) ETHC

Number of Occurences

)

System 5 Cams and Dowels

3.25

0 Series1

23,0

23,1

23,2

23,3

System 5 Cams and Dowels

Cam5000 Universal cam

New Cam5000 works with all Titus parallel neck dowels enabling simple stock management and greater confidence in use.

Highly resistant central shape

Shape of the cam body is redesigned to prevent the cam toroidal deformation or breakage in panel while tightening. The Cam5000 high resistance enables a strong and reliable joint.

Linear cam profile

Linear cam profile ensures: · Smooth tightening action · Greater dowel pull-up

Optimised cam profile

Optimised cam profile ensures a smooth and tight joint with no gap between panels.

2 o'clock lock

The cam always locks at 2 o'clock lock (230°), enabling greater consumer confidence in use while improving furniture quality.

Cam retaining pips

Cam retaining pips assures: · The cam is held in position prior to assembly · Secure cam positioning during transport and handling · Accurate factory insertion

3.26

System 5 Cams and Dowels

Zinc+steel technology for optimal strength and performance

Connectors

Zinc+steel Combi Dowels The Combi dowel combines steel and a small amount of zinc to ensure high precision and dimensional accuracy, essential to provide furniture manufacturers with the broadest possible range of drilling tolerances.

Toroidal head form Steel neck and head Zinc body

Positive stop collar

Twinstart thread

The steel neck and head provide better resistance to torsion and pullout enabling a high performance joint.

Cam

small bursting angle

Zinc body: Positive stop collar ensures correct insertion depth. Twinstart for faster and more stable insertion.

The toroidal dowel head form transfers the forces between cam and dowel more effectively resulting in a small cam bursting force.

Dowel

100% dimensional accuracy assured.

rat

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.27

System 5 Cams and Dowels

Quickfit Connectors

Assembly

It is the fastest assembly system on the market. The Quickfit™ dowel may be inserted by hand, using only finger pressure. This eliminates the labour intensive process of screwin assembly and the potential panel damage.

The Quickfit™ range of dowels has been extended to provide a complete family of fittings available in diameters of 5mm, 8mm and 10mm and lengths of 24mm and 34mm. These dowels are compatible with the range of Titus Ø15mm cams.

1. Press the cam into face board

2. Insert the dowel into side panel

3. Assemble the panels

4. Tighten the cam to lock dowel

5. Assembled panels

3.28

Quickfit TL Connectors Quickfit-TL™ dowel offers furniture manufacturers a fast assembly system providing high drilling tolerances. It has a built-in self-adjustment feature, which enables common drilling inaccuracies to be overcome.

For the self-assembly furniture consumer, Titus Quickfit-TL™ is the most consumer friendly fitting on the market. Apart from the benefit of fully tightened joints and easy locking into the same position, Quickfit-TL™ provides an exceptionally smooth action when tightened, requiring very little effort.

Drilling tolerances

Marginal inconsistencies of drilling and the problems associated with the natural movement of wood panels, no longer present problems.

Quickfit-TL™ provides a tolerance of +1/-1mm on drilling operation while ensuring that the final result is a perfectly precise and aligned joint. No other assembly fittings system can offer such tolerances and still maintain a perfect joint.

Assembly

1. Press the cam into face board

2a. Either push dowel into edge hole or...

2b. Insert the dowel into side panel

3. Assemble the panels

4. Tighten cam to lock dowel

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.29

Connectors

System 5 Cams and Dowels

Quickfit TL5 ‘Full Metal Jacket’

Quickfit TL5 with expanding steel sleeve is the new generation of Titus Quickfit TL dowels. It expands the Titus Quickfit toolless insertion technology to widely used Ø5mm dowel holes.

Toolless insertion for Ø5mm dowel holes

Unique to the market: · Easy to push in · Works without wooden dowels Ø5

Expanding steel sleeve

Expanding steel sleeve assures high resistance to torsion and pull-out.

High drilling tolerances

Extended dowel head form works as a positive stop against the cam and provides tolerances of +/-1mm on drilling operation.

3.30

Shape of dowel sleeve

· Acts as a positive stop when face inserted · Ensures correct insertion depth

50% less time to assemble the cabinet with factory insertion

Quickfit TL5 dowel is inserted into the panel by simply pushing the head of the dowel into the edge hole until it engages with the cam. It remains in this position until the cam is rotated to lock the boards together.

Connectors

System 5 Cams and Dowels

For maximum efficiency, the insertion process can be automated using the Titus proprietary Lama FastFit machine.

Functions with multiple wooden materials

· Functions with multiple materials: chipboard, MDF, solid wood · Improved performance in low density boards · Assures strong and reliable joint

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.31

System 5 Quickfit TL5 ‘Full Metal Jacket’

• • •

•

Toolless insertion technology for Ø5mm dowel holes To be used with Cam5000 only Drilling tolerances of +/-1mm when edge or face inserted Expanding steel sleeve assures a strong joint, highly resistant to pull-out Functions in multiple wooden materials (chipboard, MDF, solid wood)

Technical and mounting details

Quickfit TL5 Ø5 x 12

Item number

Zinc corrosil

Ø8

Drilling distance (mm)

Ø5 x 12

009651

897

009652

897

Ø8

To be used on Cam5000 only

±1 mm

TL3

33 ETHC

35 ETHC

TL2

Edge to hole tolerance

min. 23 (25) ETHC

max. 25 (35) ETHC

Tolerance range

Made of steel

3.32

Technical and mounting details

Quickfit TL2 ØD2 x 12 Ø8

±1 mm

TL3

D2=Ø5mm

min.23 (27/33) ETHC

max. 25 (29/35) ETHC

TL2

D2=Ø8mm

Edge to hole tolerance

Ø8 x 12

max. 25 (29/35) ETHC

ØD2 x 12 Ø8

Connectors

•

Item number

05453

880*

05503

880*

05441

880

05314

880*

05474

880

02144

Dark grey

•

Black

•

Available in Ø5mm and Ø8mm for panel-to-panel applications Suitable for use with all Ø15mm Cam2000, Cam3000 and Cam5000 products ‘Klix’ locking feature provides a strong, vibration proof joint Highly tolerant in edge-inserted, TL4 also in faceinserted applications

Drilling diameter for dowel thread (mm)

•

Drilling depth (mm)

System 5 Cams and Dowels Quickfit-TL Dowels

min.23 (27/33) ETHC

Ø8

Tolerance range

Made of plastic and zinc Quickfit TL4

835*

Ø8 x 12

Ø8

Hole to hole tolerance ±1 mm

TL3 Edge to hole tolerance

min.23 (27/33) ETHC

max. 25 (29/35) ETHC

Tolerance range TL2

max. 25 (29/35) ETHC

Made of plastic and zinc

min.23 (27/33) ETHC

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.33

System 5 Cams and Dowels Quickfit-P2F Dowels

•

The only product to enable standard panel drilling, connection of panel and hollow profile Available in Ø8mm for panel-to-hollow profile applications Suitable for use with all Ø15mm Cam2000, Cam3000 and Cam5000 products ‘Klix’ locking feature provides a strong, vibration proof joint

Quickfit P2F

Ø7.8

Ø8 10

SYS05414/app

Ø8 x thru Ø8

Made of plastic and zinc

3.34

1.0 - 1.5 approx.

Item number

Black

Technical and mounting details

Drilling distance (mm)

05414

835*

•

Thread length (mm)

09435

885

Ø3.5

9.5

09588

885

09443

885*

8.5

09583

885*

•

Zinc

Drilling depth (mm)

Ø3.5

Ø6

Ø5.8

Item number

Technical and mounting details

Combi Dowel Ø5mm

A Drilling distance (mm)

•

High quality zinc+steel dowel with greater resistance to torsion and pull-out Suitable for use with all Ø12mm and Ø15mm Cam2000, Cam3000 and Cam5000 products ‘Klix’ locking feature provides a strong, vibration proof joint Twinstart thread for faster and reliable insertion

Connectors

System 5 Cams and Dowels Combi Dowel

Philips head option available on request

Ø5 Ø7-8

Made of steel and zinc Combi Dowel M6

Ø3.5 Ø5.8

09592

885

10.5

09594

885

Ø7-8

M6 insert to suit

Made of steel and zinc Inserts Made of zinc

> see page 3.54

Inserts Made of plastic

> see page 3.55

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.35

Ø5.8

20.6

Item number

Zinc

PZ2 Head

A Drilling distance (mm)

Combi Dowel Ø5 Full Body

Total length (mm)

Technical and mounting details

Body length (mm)

System 5 Cams and Dowels Zinc Dowel

34.5

09605

885

05534

885

09430

885*

Ø6 Ø3.5 S

10.5 L

Ø5 Ø7-8

Made of steel and zinc Combi Dowel Ø7

Philips PH2 Head Ø3.5

Ø4.7

Ø5.8

Ø8.4 9.6

Ø7

Ø6 min.

Made of steel and zinc Plastic inserts

3.36

> see page 3.55

Technical and mounting details

Dowel without Circlip Ø7

Ø3.6

Ø6 S L

Ø7 Ø7-8

Ø3.6

Connectors

Item number

47.4

05929

883*

67.4

05757

883*

83.4

05858

883*

85.4

05859

883*

86.4

05753

883*

62.4

05592

883*

63.4

05857

883*

65.4

05380

883*

66.4

05778

883*

Zinc plated

•

Panel thickness (mm)

•

Available in Ø7mm Suitable for use with all Ø12mm and Ø15mm Cam2000, Cam3000 and Cam5000 products No circlip for increased tolerance Available in a variety of lengths to suit most panel-topanel applications

Drilling distance (mm)

•

Total length (mm)

•

Body length (mm)

System 5 Cams and Dowels Double-ended Dowel

Ø6 S A

L B

Ø12

Ø7

Ø3.6

^B=0 > no panel required Ø6

Made of steel S L

Dowel with Circlip

Ø12

Ø7

Ø3.6

83.4

05752

883*

85.4

05772

883*

86.4

05751

883*

63.4

05775

883*

66.4

05774

883*

Ø6 S L

Ø7-8

A B

Made of steel and zinc

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.37

• •

•

Suitable for applications requiring angled joints Suitable for use with all Ø12mm and Ø15mm Cam2000, Cam3000 and Cam5000 products Adjustable angle from 90° to 180°

Technical and mounting details

Angled Dowel

Ø7-8

Ø15

B/2 44 x

Distance x in mm 20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 67,5° 70° 75° 80° 85° 13 61.9 57.9 55.3 53.5 51.7 50.5 49.5 48.6 47.8 47 46.7 46.4 45.7 45.1 44.6

15 64.6 60.1 57 54.7 52.9 51.5 50.3 49.3 48.3 47.5 47.1 46.7 46 45.3 44.7

16 66 61.2 57.9 55.4 53.5 52 50.7 49.6 48.6 47.7 47.3 46.9 46.1 45.4 44.7 B

18 68.8 63.3 59.6 56.9 54.7 53 51.6 50.3 49.2 48.2 47.7 47.3 46.4 45.6 44.8

19 70.1 64.4 60.5 57.6 55.3 53.5 52 50.7 49.5 48.4 47.9 47.5 46.5 45.7 44.8

22 74.2 67.6 63.1 59.7 57.1 55 53.2 51.7 50.4 49.1 48.6 48 46.9 45.9 45

23 75.6 68.7 63.9 60.4 57.7 55.5 53.6 52.1 50.6 49.4 48.8 48.2 47.1 46

Made of steel

3.38

Item number

Zinc plated

System 5 Cams and Dowels Angled Dowels

05860

883

Cam5000 Cross Drive

PZ2 Drive 9537

9533

Item number

12/13 9533

10.5

6 min.

9.9

009695

885.300

15/16

12.5

7.5-8

11.9

009690

885.300

9537

Technical and mounting details

Connectors

Ø15

Zinc

•

Cam height (mm)

•

Improved central shape for highly resistant cam Suitable for use with steel Quickfit TL5 dowels and all other parallel neck dowels ‘Klix’ locking feature provides a strong, vibration proof joint Cam-retaining pips ensure that a cam is held in panel position prior to assembly

Drilling for dowel (mm)

•

Drilling depth (mm)

•

Panel thickness (mm)

System 5 Cams and Dowels Ø15mm Cam5000

Ø15

5587 5563 5644

Ø15xD

9.9 10.4

12/13

11.9

6 6 7.5

10.5 12

12/13 15/16

9.9 10.4

6 6 7.5

15/16

10.5 12

18/19 22/23

6 6 7.5

25/26

10.5 12

28/29 29

Ø15

5654 5656 5657

11.9 9.9 10.4

5676 5678 5679

11.9

Made of zinc Cam5000 Hexagonal Drive

Combined Drive with HEX

9537

9537 15/16

18/19 e

9533

•

9533 •

12.5

7.5-8

11.9

009699

885.300

9-9.5

13.2

009692

885.300

Use standard cover caps with pin=Ø4mm Ø15 Black available on request H

9.9 10.4

12/13

11.9

6 6 7.5

10.5 12

12/13 15/16

9.9 10.4

6 6 7.5

15/16

10.5 12

18/19 22/23

6 6 7.5

25/26

10.5 12

28/29 29

Ø15 5587 5563 5644

Ø15xD

e Ø15

5654 5656 5657 5676 5678 5679

11.9 9.9 10.4 11.9

Made of zinc

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.39

Item number

12/13 9533

10.5

6 min.

9.9

09642

885

15/16

12.5

7.5-8

11.9

09490

885*

9537

Technical and mounting details

Cam3000 Cross Drive

PZ2 Drive

9537

9533

•

Ø15

Black available on request

Ø15

5587 5563 5644

Ø15xD

Zinc

•

Cam height (mm)

•

Drilling for dowel (mm)

•

Its optimised shape provides a more efficient cam profile with smooth tightening action and greater dowel pull-up Suitable for use with Combi dowels, forged steel dowels, Quickfit dowels and Quickfit TL5 dowels ‘Klix’ locking feature provides a strong, vibration proof joint Cam-retaining pips ensure that a cam is held in panel position prior to assembly

Drilling depth (mm)

•

Panel thickness (mm)

System 5 Cams and Dowels Ø15mm Cam3000

e Ø15

5654 5656 5657 5676 5678 5679

9.9 10.4

12/13

11.9

6 6 7.5

10.5 12

12/13 15/16

9.9 10.4

6 6 7.5

15/16

10.5 12

18/19 22/23

6 6 7.5

25/26

10.5 12

28/29 29

9.9 10.4

12/13

11.9

6 6 7.5

10.5 12

12/13 15/16

9.9 10.4

6 6 7.5

15/16

10.5 12

18/19 22/23

6 6 7.5

25/26

10.5 12

28/29 29

11.9 9.9 10.4 11.9

Made of zinc Cam3000 Hexagonal Drive

Combined Drive with HEX

9537

9537 15/16

18/19 e

9533

•

9533 •

12.5

7.5-8

11.9

09537

885*

9-9.5

13.2

09536

885*

Use standard cover caps with pin=Ø4mm Ø15 Black available on request

Ø15 5587 5563 5644

Ø15xD

e Ø15

5654 5656 5657 5676 5678 5679

Made of zinc

3.40

11.9 9.9 10.4 11.9

Technical and mounting details

Cam3000 S/15

PZ2 Drive

15/18

12.5

Connectors

Item number

Zinc corrosil

•

Zinc

•

Drilling for dowel (mm)

•

Innovative design offers optimal performance with maximum cost effectiveness Suitable for use with Combi dowels, forged steel dowels and Quickfit dowels ‘Klix’ locking feature provides a strong, vibration proof joint Cam-retaining pips ensure that a cam is held in panel position prior to assembly

Drilling depth (mm)

•

Panel thickness (mm)

System 5 Cams and Dowels Ø15mm Cam3000 S

7.5-8

09491

885*

897*

11.9

11.9 Ø15

9.9 10.4

12/13

11.9

6 6 7.5

10.5 12

12/13 15/16

6 6 7.5

15/16

10.5 12

18/19 22/23

6 6 7.5

25/26

10.5 12

28/29 29

Ø15

5587 5563 5644

Ø15xD

e Ø15

5654 5656 5657 5676 5678 5679

9.9 10.4 11.9 9.9 10.4 11.9

Made of zinc Cover Caps Made of plastic

> see page 3.56

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.41

•

Ø15xD Ø15xD

e B

Cam2000 Ø15

5587 5563 5644

9.9 10.4

6 6 7.5

12/13

10.5 12

12/13 15/16

11.9

e Ø15

5654 5656 5657 5676

Ø15xD

9.9 10.4

6 6 7.5

15/16

18/19 22/23

6 6 7.5

25/26

10.5 12

28/29 29

10.5 Ø15

11.9 9.9 10.4 11.9

B Ø15

5654 5656 5657

Ø15

PZ Drive

9.9 10.4

11.9 9.9 12/13 5586 H 12/13 10.9 5652

5676

1 mm

Ø15xD

5678 5679

PH Drive Ø17

5563 5644

5678 5679

5658 5659

12.4

9.9 13.9H 15.9 9.9 5587 5677 15/16 10.4 17.4 5675

5563 5644

11.9 9.9 10.4

5654

11.9

5656 5657

10.4

11.9 H 9.9 10.4

15/16 11.9

5676 5678 5679

Drilling depth (mm)

Technical and mounting details 5587

Panel thickness (mm)

9.9 10.4

6 e6 7.5 10 6

10 10.5 B 12 min. 10 12 D

12.5

Item number

12/13 15/16 6-6.5

e 11 10.9

6.5 8 9.5 e

12/13

^05587 05653

11.5 13 6

6e 6 6 7.56

12.7 7.5

10.5 28/29 15/16 12 18/19 29

6 6 7.5

22/23

25/26

10.5 12

28/29 29

Ø17

25/26

10 10.5 12

847*

885*

Ø17

B 6-6.5

19 B 15/16 6 1614 D 10 23 26 12/13 7.5-8 12.7 18/19 6 17.5 1010.5 10.5 12/13 6 7.5 12 1215/16 22/23 7.5

Zinc

•

Available in a variety of head, drive recess and board thickness versions to suit most applications Suitable for use with all Titus dowels ‘Klix’ locking feature provides a strong, vibration proof joint Linear cam profile results in smooth, easy cam rotation and dowel pull-up

Nickel

•

Drilling for dowel (mm)

System 5 Cams and Dowels Ø15mm Cam2000

05644 5587

1 mm

847*

> Ø15 H

5563 5644

885*

847* 9.9

5586

9.9 10.4

1 mm Ø15

11.95652 5658 5659

6 H6 10.9 7.5

12.4

885 10 6 10

10.5D 6.5 1211 e

5652 B5658 5659 12 12/13 5675 B

B 12/13 5677 13 15/16

8 9.5

12.5 14

16 19

17.4

17.5

15.9e > H5675847*

9-9.5

5654 05656

847*6

11.9 18/19

Ø15 14

22/23

11-11.5

25/26

17.9

12.5-13

> 9.9 10.4 5656 5657 >11.9 05657 9.9 5676 10.4 5678

05676

6 847*6 7.5

28/29

19.4

14-15.5

05678

847*

11.9

11.5 13

05654

5679

13.9

7.5-8

5677

5586

6 7.5 847*

885D16 10 885 10.5 12

885

e 6

10.9 12.4

6.5 8 9.5

13.9 15.9 17.4

11.5 Ø17 13

15/16

Ø15

18/19 22/23

25/26

10.5 885

28/29 29

H 9.9

885

^Ultraflat - specially designed for thin panels (not compatible with TL dowels) Other finishes available on request •

Made of zinc Ø15xD

Ø15

Ø15xD

Cam2000HØ15 Headed D e 5587 5563 5644

5654 5656 5657 5676 5678 5679

9.9 10.4

5587

12/13

11.9

6 6 7.5

10.5 12

9.9 10.4

6 6 7.5

15/16

10.5 12

18/19 22/23

11.9 9.9 10.4 11.9

6 6 7.5

Ø15 Ø15

12/13 15/16

5563 5644 5587 5563 5644 5654 5656 5657 5654 5676 5656 5678 5657 5679 5676 5678 5679

9.9 H 10.4

6 e6 7.5 6 6 e 7.5

10 D 10.5 12 10

12/13 B 12/13 15/16 12/13

10.5D 12

12/13 B 15/16

11.9 9.9 10.4 H 11.9 9.9 H 10.4

6 Ø17

11.9 9.9 9.9 10.4 10.4 11.9 11.9 9.9 10.4 11.9

e6 7.5 6 6 6 6 7.5 7.5 6 6 7.5

Ø15

10 D 10.5

15/16 B 18/19

12 10 10 10.5 10.5 12 12 10

22/23 15/16 25/26 18/19 28/29 22/23 29 25/26

10.5 12

28/29 29

1 mm

Ø17 Ø15

1 mm 1 mm

5586

Ø15 PZ Drive

9.9H

10.9 12.4 H 13.9 10.9 15.9 12.4 17.4

66.5

9.9

5652 5658 5659 5652 5675 5658 5677 5659 5677

13.9 15.9 17.4

10 min. 10 12

5586

13H

5652

6 e

9.9 H

5675

5658 5659

5586

5677

28/29 Ø15xD 29 B

Ø17

5675

25/26

10.5 12

PH Drive

D 10

12B

1013

e8 9.5 6.5 11.5 8 13 9.5

12.5 D 14 11 16 12.5 17.5 14

11.5 13

17.5

10.9

16 B 19 13 23 16 26 19

emin. D

^05586

847*

885*

6.5 B

847*

885*

847*

885*

8 16 19

05658

13.9 15.9 19 17.4

11 6.5 812.912.5 14 9.5 11.5 13 16 17.5 13

23 9.5

05659

5587

9.9

12/13

14.5

11.5

5563 05675

>10.4

847*6

10.5 885*

12/13 15/16

16.5

05677

847*e 885*D

Ø15 19.4

14.5

5654 05679

> 9.9

10 847*6 885*

10.9

16 12.4

05652

5644

11.9

10.4

847*

7.5

6 11.9 (not7.5 ^Ultraflat - specially designed for panels 9.9 6 5676 compatible with TL dowels) 10.4 6 5678 • Other finishes available on request 7.5 11.9 5679 5656 5657 thin

Made of zinc Cover Caps for Ø15 Cams Made of plastic

3.42

> see page 3.56

885* 12

10.5 12

Ø17

B 15/16 18/19 22/23

25/26

10.5 12

28/29 29

Ø15

5587

5563 5644

Ø15xD

Technical and mounting details Ø15

Cam2000 Ø12

9.9 10.4 11.9 H

5654

Drilling depth (mm)

Panel thickness (mm)

6 6 7.5

12/13

10.5 12

12/13 15/16

9.9 10.4

6 6 7.5

6 5656 12/13 10 12 7.5 min. 11.9 5657 5676 5678 5679

Ø14 1 mm

15/16

6-6.5

18/19 22/23

25/26

10.5 12

28/29 29

18/19

13 min.

•

10.5

15/16

Ø12

11.9

Connectors

•

Ø17 1 mm

Item number Ø15

05575

5586

5652 5658 5659

838* 5675 5677

9.9

10.9 12.4

13.9

6.5 8 9.5

17.4

12.5 14

16 19

17.5

Corrosil zinc

•

Zinc

•

Suitable for all Titus screw-in dowels Available in a variety of head, drive recess and board thickness versions to suit most applications Particularly suited to drawer front attachment applications ‘Klix’ locking feature provides a strong, vibration proof joint Linear cam profile results in smooth, easy cam rotation and dowel pull-up

Nickel plated

•

Black painting plate

•

Drilling for dowel (mm)

System 5 Cams and Dowels Ø12mm Cam2000

847* 16 23 897* 15.9 11.5 885*

7.5-8

05578

885*

9-9.5

05580

885*

Other finishes available on request

Ø12 x D e

5587 5563 5644

Ø15xD

Made of zinc Ø15

Cam2000 Ø12 Headed

5654 5656 12 5657 5676

Ø14 1 mm

5678 5679

12 16

Ø12

9.9 10.4

12/13

11.9

6 6 7.5

10.5 12

12/13 15/16

9.9 10.4 11.9 9.9 10.4 11.9

6 6 7.5

15/16 18/19

25/26

10.5 12

28/29 29

10 min 12.5

5586

9.9

5652

10.9 12.4

13.9

6.5 8 9.5

12.5 14

16 19

17.4

17.5

1 mm

6 9.5 12 22/235.25 7.5 min. 10.5

Ø17

Ø15

05574

5658 5659

838* 5675 5677

847* 16 23 897* 15.9 11.5 885*

05576

885*

05579

885*

Ø12

•

Other finishes available on request

Ø12 x D

Made of zinc Cover Caps for Ø12 Cams Made of plastic

> see page 3.56

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.43

System 6 Quickfit-Expando Connectors

System Features A face boring connector family for 32mm system drilling with full range of panel and application variants for all cabinet manufacturing applications: • •

•

drop on

• •

Applications

Side-entry Drop-on

side entry

Minimum drilling requirements Linear cam design for constant tightening loads when driving Angledrive feature on cam for maximum driving comfort Interchangeable pins for wood, plastic and steel applications Pins with twinstart drive for fast insertion Interchangeable Quickfit pin fastenings available Toolless fastening capable versions Back-to-back fastenings for common vertical panel fixing of shelves

System 6 consists of a range of 20mm and 25mm diameter housings, Quickfit™ and conventional dowels, end dowels and double ended dowels. Housings are made from high grade plastic or zinc, with zinc cams. Wedgefix-6 connector is a special fastener without cam, simply to snap onto a pre-inserted dowel.

Titus System 6 is ideal for use in high volume production of case goods, closet and garage storage systems. As no edge boring is required,

it is an excellent choice for manufacturing environments with limited drilling capacity.

drop on Side-entry insertion of shelf panel: from the side or from the top.

Drop-on insertion of shelf panel: only from the top. Using drop-on connections allows for one-man installation.

side entry

Angledrive feature

3.44

The angledrive feature on the cam allows for the angled position of the screwdriver with the locking action creating a tight and secure joint.

System 6 Quickfit-Expando Connectors

Connectors

System Features Outrigger/ Non-outrigger

Outrigger

Expando function

Expanding housings and dowels provide a tight joint.

Assembly

1. Press the housing into face board

2. Press the dowel into side panel

3. Assemble the panels

4. Tighten the joint

Download supporting documentation from the Titus Tekform website titustekform.com.au

Non-outrigger

3.45

System 6 Quickfit-Expando Expanding Dowels

•

vailable in Ø5mm, Ø8mm and Ø10mm for panelA to-panel, panel-to-hollow profile and back-to-back applications Suitable for applications with all Titus Ø20 and/or Ø25mm Expando-6 housings ‘Klix’ locking feature provides a strong, vibration proof connection Depth stop collar for accurate insertion

Dowel

D2= Ø5mm

Item number

Dark grey

Technical and mounting details

Drilling diameter for dowel thread (mm)

06408

880

06410

880

06479

880

ØD2 x 12.5

D2= Ø8mm

Ø8 x 12.5

Made of plastic and zinc Ø5 x 7.5

Dowel Ø5 x 7.5 Back-to-back Applications Ø5 x 7.5

Ø10 x 12.5

Made of plastic and zinc

3.46

•

vailable in various Ø3mm and/or Ø5mm thread forms A for screw-in, knock-in and/or ‘spiked’ hole applications Suitable for applications with all Titus Ø20mm and/or Ø25mm Expando-6 housings ‘Klix’ locking feature provides a strong, vibration proof connection Dowels feature an integral skirt which acts as a positive stop during insertion

Connectors

System 6 Quickfit-Expando Dowels

Ø5xC

Technical and mounting details Ø5x8

Dowel Ø5 Ø5xC Ø5x8 Ø5x8

Item number

06401

885*

06402

885

883*

11.5

06406

885

883

06403

885*

06405

883*

06495

883*

Zinc plated

Ø5xC

Zinc

Ø5xC

Drilling diameter for dowel thread (mm)

Ø5x12

Made of zinc or steel Dowel Ø5 x 11 Knock-in

Ø5x8 Ø5x12 Ø5x12 hole to suit M4 insert

Made of zinc hole to suit M4 insert Ø5x12

Dowel M4 x 7

hole to suit M4 insert Ø5x11.5

Ø5x11.5 hole to suit M4 insert

Made of steel Dowel Ø3 x 11.5

Ø5x11.5 Ø3 max

Ø3 max Ø5x11.5 Ø3 max

Made of steel Plastic inserts

> see page 3.54

Ø3 max

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.47

System 6 Quickfit-Expando Double-ended Dowels

• •

•

For 16mm, 18mm and 19mm board Suitable for applications with all Titus Ø20mm and/or Ø25mm Expando-6 housings ‘Klix’ locking feature provides a strong, vibration proof connection

Technical and mounting details

Double-ended Dowel

Ø4.8

Ø5.8

B Ø5 x thru

Made of zinc

3.48

Item number

Zinc

1.5 Ø9.5

Ø4.8

Panel thickness (mm)

06414

885

06413

885*

06416

885*

•

• •

•

side entry

drop on

06453

847*

15/16

12.5

06435

831*

861*

877

9.5

18/19

06437

831*

861*

877*

Other finishes available on request

Made of plastic

15/16

12.5

06447

847*

9.5

18/19

06449

847*

15/16

12.5

06431

831*

861*

877*

9.5

18/19

06433

831*

861*

877*

e 9.5

Made of zinc

Drop-on Ø20 x D

side entry

18/19

9.5

847*

•

Ø20 x D

drop on

Drop-on

side entry

06451

Made of zinc

22 H

12.5

9.5

Ø20 x D

drop on

15/16

Side-entry

side entry

22 H

White plastic

Ø20 x D

Silver plastic

Side-entry

Item number

Nickel plated

Technical and mounting details

Dark brown plastic

Drilling depth (mm)

B Panel thickness (mm)

e Drilling for dowel (mm)

drop on

Available in 15mm/16mm and 18mm/19mm versions for drop-on and/or side-entry applications Available in all-metal or plastic/metal options ‘Klix’ locking feature provides a strong vibration proof connection Compatible with all screw-in and Quickfit-6 dowels

Connectors

System 6 Quickfit-Expando 20mm Expanding Housing Non-outrigger

•

Other finishes available on request

e 9.5

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.49

•

• •

•

12.5

06459

847*

9.5

18/19

06461

847*

15/16

12.5

06443

831* 835*

9.5

18/19

06445

835*

Nickel plated

15/16

Black plastic

Dark brown plastic

Item number

E 22

Ø10 x 10.5 Ø20 x D

Drilling depth (mm)

B Panel thickness (mm)

Side-entry

e Drilling for dowel (mm)

Technical and mounting details

White plastic

System 6 Quickfit-Expando 20mm Expando Housing Outrigger

e 32

9.5

Made of zinc Side-entry

E 22

Ø10 x 10.5 Ø20 x D

•

877 877*

Other finishes available on request

e 32

9.5

Made of plastic Drop-on

E 22

Ø10 x 10.5 Ø20 x D

15/16

12.5

06455

847

9.5

18/19

06457

847*

15/16

12.5

06439

831* 835*

877

9.5

18/19

06441

831* 835*

877*

e 32

9.5

Made of zinc Drop-on

E 22

Ø10 x 10.5 Ø20 x D •

e 32

Made of plastic

3.50

9.5

Other finishes available on request

•

• •

•

Ø20 x D

06470

877*

15/16

12.5

06473

877

9.5

18/19

06465

877* 835* 831* 861*

06464

861*

•

Silver

Dark brown

Black

Item number

White

Drilling depth (mm)

B Panel thickness (mm)

For Use with Screw-in Dowels

e Drilling for dowel (mm)

Technical and mounting details

Available in 12mm, 15mm/16mm and/or 18mm/19mm versions for Quickfit-6 and/or standard dowel applications Available in a variety of plastic colours Wedgefix-6 housing allows easy customer hand assembly or factory automated insertion When used with Quickfit-6 dowels this provides a true toolless fastening system

Connectors

System 6 Quickfit-Expando Expando Wedgefix Housing (No Inner Cam)

861* 835* 831* 861*

Other finishes available on request

e 9.5

Made of plastic For Use with Quickfit Dowels

15/16

12.5

06471

877* 835* 831* 861*

9.5

18/19

06472

877* 835* 831* 861*

22 •

Other finishes available on request

Ø20 x D

e 9.5

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.51

vailable in 15mm/16mm and 18mm/19mm versions for A drop-on and/or side-entry applications Available in all-metal or plastic/metal options ‘Klix’ locking feature provides a strong vibration proof connection Compatible with all screw-in and Quickfit-6 dowels

drop on

Technical and mounting details

Side-entry Ø20 x D

side entry

Item number

White plastic

•

Black plastic

•

Drilling depth (mm)

•

Panel thickness (mm)

•

Drilling for dowel (mm)

System 6 20mm Knock-in Housing Non-outrigger

15/16

12.5

06381

835

877

9.5

18/19

06385

835* 877

15/16

12.5

06383

835* 877

9.5

18/19

06387

835* 877

e 9.5

Made of plastic Drop-on

drop on

Ø20 x D

e side entry

9.5

Made of plastic

3.52

System 7 High Strength Connectors Contract Fix™ System

• • •

M6 Dowel 7x34

Item number

05971

883

05960

885

05917

885

Zinc

Technical and mounting details

Zinc plated

Connectors

•

High performance fastener Thread design gives repeatability Multi-drive recess Higher than average pull-up

Ø7-8 7.5/9 34 Ø7-8

Ø15x12.5/14 Made of

steel

7.5/9

Housing Cylinder 15x12

Ø15x12.5/14

Ø7-8

Made of zinc

7.5/9

Grub Screw

Ø15x12.5/14

Made of zinc Inserts Made of zinc

> see page 3.54

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.53

•

• • •

Available in both zinc and plastic for use in various applications Suitable for use with various threaded dowels Suitable for use with various panel thicknesses Knock-in and screw-in versions available

Technical and mounting details

Raw

Accessories for Connectors Inserts

Item number

Ø8 x 9

408.3166

600*

408.3391

600

408.3423

600*

408.3424

600*

Ø8

M6 9

Made of zinc Ø9 x 13

M6M6 Ø9

002175

Ø9.5

13 13

Made of zinc Ø9.5 x 18

Ø9.5

Made of zinc Ø12 x 15

M8 15

Made of zinc

3.54

Ø12

Connectors

Accessories for Connectors Inserts

Ø10 x 13/M6 Nut 13

Ø10 M6

M6 M6

Ø10

Made of

plastic Ø8Ø10

275.4058

200*

276.4036

200*

Ø10 10

13 Ø8

C M6

Ø10 M4

2172

single-start Euro thread

2182

twin-start Euro thread M4

Ø10

Ø8

Ø10

Ø8

Twinstart thread 10

Ø10

twin-start 2182Euro thread twin-start Euro thread

twin-start 2182 Euro thread twin-start Euro thread

single-start 2172 Eurosingle-start thread Euro thread

Ø8

single-start 2172Euro thread single-start Euro thread

2172

Ø10

Made of plastic

2182

Ø8

2182

Ø10

Ø10 M4

2172 Euro Thread

200*

Ø10

Ø8 x 10/M4 Nut

twin-start Euro thread

Ø10

single-start Euro thread

275.4035

275-4058

2172

275-4035 Ø10

2182

Item number

Natural

Technical and mounting Ø10 details

Natural white

Drilling length for insert (mm)

Ø10

02182

346*

Ø10

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.55

Technical and mounting details

Cover Cap Ø17 2.5

Ø17

PZ2 3.2 •

Ø3.2

Item number

•

277.4355

370

390

330* 380

Light grey

•

Light brown

•

Available in a variety of colours Suitable for use with both pozi and hex cam drive features Suitable for use with various diameter cams Both domed and flat versions available

Black

•

Dark brown

•

Inner diameter (mm)

Accessories for Connectors Cover Caps

Other finishes available on request Suitable for cams with Pozi 2 recess

Ø17

2.5

Ø15

2.5

Ø4.2 Ø17 Ø29.5 Ø3.2

Made of plastic Ø13

Ø17

2.5

Cover Cap Ø17

•

Ø4.2

•

277.4225

370* 390* 330* 380*

Other finishes available on request Suitable for cams with Hex recess

Ø17 Ø29.5

2.5

Ø15 Ø15 Ø25

Hex 4.2

Ø3.2

2.5

Ø17

Made of plastic Cover Cap Ø29.5

Ø13 Ø13

Ø4.2

275.4034

Ø29.5 •

Ø25 Ø25

Made of plastic

3.56

370* 390* 330* 380*

Other finishes available on request

Leg height adjustment feature Description

Leg Tops

Item number

Black

•

Drilling distance (mm)

•

Drilling depth (mm)

•

Lip provides additional support to end panel and gives extra strength Rivet fix design gives quick fastening of socket Choice of knock-in dowel or screw-in sockets Invert second clip for corner plinth fixing

Drilling diameter (mm)

•

With lip

Knock-in 2-pin 10/3

12.5/6 64x64

02669

835

With lip

Screw-in

64x64

02671

835

With lip

Knock-in 4-pin 10

12.5

64x64

02672

835

Without lip

Knock-in 2-pin 10/3

12.5/6 64x64

02711

835

Without lip

Screw-in

64x64

02712

835

Without lip

Knock-in 4-pin 10

12.5

64x64

02713

835

12.5

02663

835

24 Ø15x12 02671

34 x 34

ØA x D ØA x D 32

38.5

34 x 34 Made of plastic Rivet Fix Leg Top

34 x 34

32 Ø10x12.5

32 Made of plastic

32 Download supporting documentation from the Titus Tekform website titustekform.com.au

3.57

Adjustable Cabinet Legs

Adjustable Cabinet Legs Leg Top Fixes

• •

Leg height adjustment feature

Adjustable Leg

Item number

60-90

02570

835

92-150

02648

835

•

02648

To be used with screw-in plinth clip 02634 > see page 3.60

Made of plastic Adjustable Leg, Telescopic

38 •

85-165

02641

835

To be used with screw-in plinth clip 02500 > see page 3.60

Height adjustment from 85mm to 165mm as shown

38.5

Made of plastic Adjustable Leg, with Foot

92-150

02699

835

110-170

02645

835

125-185

02706

835

•

Made of plastic

3.58

To be used with screw-in plinth clip 02710 or knock-in plinth clip 02578 > see page 3.60

Adjustable Cabinet Legs

•

Legs are supplied assembled at a pre-set height Wide adjustment range to fit all common plinth heights Jacking point adjustment feature Simple push-on socket design Telescopic leg offers unparalleled adjustment

Black

•

Fitting height adjustment (mm)

•

Drilling distance (mm)

Adjustable Cabinet Legs Adjustable Leg, Extension and Foot

• •

Leg extension for use with all adjustable legs Fixed foot allows for common drilling distance (B1) of all legs

Ø76

2569

Leg Extension

2571

Item number

Black

Leg height adjustment feature

02571

835

02569

835

50 Ø48

Made of plastic Fixed Foot

Ø76

2569

2571

50 Ø48 Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.59

Adjustable Cabinet Legs

Adjustable Cabinet Legs Adjustable Leg, Extension and Foot

Adjustable Cabinet Legs Plinth Clips •

• •

Spring design eliminates the need for drilling and fits into any position on plinth The screw-in version can sit in variable plinth positions When taking plinth around the corner, the fitting is reversible

Leg height adjustment feature

Plinth Clip 4

02578

Description

Item number

Black

Drilling distance (mm)

Screw-in Plinth Clip 02500 for telescopic leg

835

Knock-in Plinth Clip 02578

835

Screw-in Plinth Clip 02710

835

1371

4 32

1371

4 2578

38.5

Made of plastic 4 Plinth Clip

Screw-in Plinth Clip 02634 2578

38.5 2523, 2634

2523, 2634

Made of plastic

3.60

Decorative Legs

Decorative Legs for Furniture

Tiffany Leg Aluminium Ø35mm

Finish

Adjustment (mm)

Length (mm)

Item number

Brushed Grey

100

606.8D03.907.100

Brushed Grey

125

606.8D03.907.125

Brushed Grey

150

606.8D03.907.150

Stainless Steel

150

606.8D03.530.150

Polished Chrome 30

870

606.8D05.452.707

Made of aluminium Stainless Steel Leg Ø50mm

Made of stainless steel Polished Chrome Leg Ø75mm

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.61

Adjustment (mm)

Table Leg Ă&#x2DC;60mm

Finish

Length (mm)

Decorative Legs for Tables, Sofas and Beds

Item number

Brushed Nickel

710

606.8D05.454.703

Polished Chrome

710

606.8D05.454.707

Anodised Aluminium

150

N/A

606.8D03.807.150

Made of steel Square Sofa Leg 32 x 32mm

Made of aluminium

3.62

Fastmount Panel Mounting

Download supporting documentation from the Titus Tekform website titustekform.com.au

Fastmount

ÂŽ

3.63

Fastmount Panel Mounting Systems FASTMOUNT Setting the standard for panel mounting

Clip Selection Guide

Perfect Panel Mounting

The secret to Fastmount Marine Clip Selection Guide SUBSTRATE TYPE

TM is the Combining speed, versatility and accuracy, the Fastmount system enables unique set of design registered designers, installers and contractors to interchangeable clips ideal for secure re-think the paneling process. fastening. With Fastmount, panels can be easily Synthetic removed and refitted in Panels Plywood Panels Panels Synthetic Honeycomb Panels Composite Panels Fastmount is designed to perform on sea, >6mm (Forex) <6mm (Aluminium) (foam core grp) any sequence, time after time. (Forex) >6mm land and in the air. Applications of use PC-F1A + PC-M1A PC-F1A+ PC-SM2 PC-F1A + PC-M1A/ PC-F1A + PC-SM2/ PC-F1A /AF1/SF1 + are onlySM2H limited by your imagination and M2H/SM2/SM2H/VM1 PC-SM2/SM2H PC-F1A + M2H/SM2/ LP-F8 + LP-SM8 SM2/VM1 LP-F8 + LP-M8/SM8 + LP-SM8 VL-F3 + VL-M3 commonLP-F8 sense. VL-F3 + VL-M3

PANEL TYPE Plywood Panels <6mm

Plywood frames or Cnc cut plywood ceiling

PC-F1A/AF1/SF1 + PC-SM2 VL-F3 + VL-M3 LP-F8 + LP-SM8

Benefits

Aluminium frames

MC-M5 + MC-F5

No visible fixings

•

PC-F1A/SF1/AF1 + PC-M1A/ M2H/SM2/ SM2H/VM1

LP-DF8/F8 + LP-SM8 PC-SF1 + PC-SM2

VL-F3+VL-M3 • Ceilings,

PC-F1A/SF1/AF1 + PC-SM2 VL-F3+VL-M3

LP-F8 + LP-SM8

Allows for panel flex and expansion

Variety of mounting options – selfMC-M5 + MC-F5/F10 MC-M5 + MC-F5/F10 tapping, glue and screw fix

VL-F3 + VL-M3

Steel frames

VL-F3 + VL-M3

MC-M5 + MC-F5/F10

PC-F1A/SF1/RF1 + PC-F1A + PC- SM2 PC-F1A/SF1/RF1 + PC-F1A/SF1/RF1 + • • Eliminates panel damage – install Provides cavities for PC-M1A/M2H/SM2/ PC-M1A/M2H/SM2/ PC-SM/SM2H LP-F8 + LP-SM8 SM2H VM1 SM2H/VM1 panels during final build stages enhanced VL-F3 +acoustics VL-M3 VL-F3+VL-M3 VL-F3 +• VL-M3 VL-F3 + VL-M3 MC-M5 + MC-F5

VL-F3 + VL-M3

Applications

VL-F3 + VL-M3

VL-F3 + VL-M3 MC-M5• + MC-F5/F10 PC-RF1/SF1 PC-SF1 + PC-SM2

Composite substrate

LP-F8 + LP-M8/SM8

PC-F1A/SF1/AF1 + PC-M1A/M2H/SM2/ SM2H/VM1

PC-RF1/SF1/F1A +

services PC-SM2and

VL-F3 + VL-M3

PC-F1A/ SF1 + PC-SM2

LP-DF8/F8 + LP-SM8

LP-DF8 + LP-SM8

PC-AF1/SF1 + PC-

VL-F3 + VL-M3

walls, feature panels VL-F3+VL-M3 and Upholstered, painted, prefinished and VL-F3 + VL-M3 SM2 MC-M5+MC-F5/F10 MC-M5+MC-F5/F10 upholstery composite MC-M5 panels + MC-F5

PC-F1A + PC-SM2

•

PC-SF1• / RAccess, F1 + PC-SMinspection PC-SF1/RF1and + PC-SM2 VL-F3+VL-M3

PC-SF1 + PC-SM2 VL-F3+VL-M3

panels

MC-M5+ MC-F5/F10 •

VL-F3 + VL-M3

ventilation PC-SF1/RF1 +

Interior and selected exterior applications

•

Mounts into a wide variety of substrates PC-SF1/RF1 + PC-SF1/RF1 + PCPC-SM2 SM2/SM2H GRP, composite, honeycomb

PC-M1A/M2H/SM2/ e.g. SM2H/VM1

VL-F3+VL-M3

•

VL-F3+VL-M3

New build, re-fit and upgrades MC-M5 + MC-F5/F10 MC-M5+ MC-F5

MC-M5+ MC-F5/F10

Architectural Clip Selection Guide

Clip Selection Guide SUBSTRATE TYPE

PANEL TYPE Plywood

MDF

Particle Board

Acoustic Panel

Honeycomb

Fibrous Cement Board

Exterior Panels

PC-SF1 + PC-M1A

PC-SF1 + PC-SM2

N/A

PC-SF1 + PC-M2H

PC-SF1 + PCSM2H

PC-SF1 + PCSM2H + Glue Thread

PC-F1A + PC-VM1

LP-F8 + LP-SM8

N/A

PC-F1A + PC-M2H

PC-F1A + PC-M2H PC-F1A + PC-SM2

PC-F1A + PCSM2H

Must use Timber Batten + LP-F8 + LP-SM88

N/A

PC-F1A + PC-SM2

Must use Timber Batten + LP-F8 + LP-SM8

N/A

PC-F1A + PC-SM2

Drywall eg. Gib Board

LP-DF8 + LP-M8

LP-DF8 + LP-M8 LP-DF8 + LP-SM8

LP-DF8 + LP-SM8 with epoxy glue

N/A

LP-DF8 + LP-SM8

LP-DF8 + LP-SM8 with HMA (hot glue)

N/A

LP-DF8 + LP-SM8

Plywood, MDF

PC-F1A + PC-M1A

LP-F8 + LP-SM8

PC-F1A + PC-M2H

LP-F8 + LP-SM8 with epoxy glue

PC-F1A + PC-SM2

PC-F1A + PCSM2H

Steel frames eg. Rhondo

PC-SF1 + PC-SM2 PC-SF1 + PCSM2H Timber battens or frames

PC-F1A + PCSM2H Concrete + timber batten

This Clip Selection Guide should be used as a general guide only. Please contact Fastmount Headquarters for more detailed advice if required. For overhead panels Fastmount strongly recommends a trial sample be made to prove compatability of our systems with the panels and substrates in your project. 1 | FASTMOUNT PRODUCT CATALOGUE 2015

3.64

Fastmount Panel Mounting Systems Standard Profile Range

•

PC-01 Self-tapping Clip Set

Item number

TapFast

606.8F20.122

Black

Mounting

White

Fastmount

•

Panels can easily be removed and refitted in any sequence time after time Available in self-tapping installation A range of standard clips designed for adhesive fix, heavy duty, high shear strength and variable gap requirements

201

Standard self-tapping system suitable for most applications, using PC-F1A and PC-M1A. Fit with CT-03 and CT-10.

PC-M1B Standard Self-tapping Male Clip

TapFast

606.8F20.222

201

Screws into 10mm hole drilled with CT-01 or CT-09. Fits into PC-F1A, PC-SF1, PC-RF1, PC-AF1. Install with CT-10 (CT-04 can also be used).

PC-M2H Self-tapping Heavy Duty Male Clip

TapFast

606.8F20.222

402

Fits into PC-F1A, PC-SF1, PC-RF1, and PC-AF1. Mounts into 10mm hole CT-01 and CT-09. Minimum panel thickness 9mm. Install with CT-10.

PC-VM1 Vario Self-tapping Male Clip

TapFast

606.8F20.242

201

Variable gap, high shear strength self-tapping male clip. Clips into PC-F1A, PC-SF1, PC-RF1, and PC-AF1. Mounts into 10mm hole CT-01 and CT-09. Install with CT10. Minimum panel thickness 9mm.

PC-VMX Vario Self-tapping Extra Heavy Duty Male Clip, 15kg

TapFast

606.8F20.244

201

Male self-tapping clip with variable gap and high shear strength. Mounts into PC-F1A, PC-SF1, PC-RF1, PC-AF1. Extra heavy duty clip with 15 kg pull-out load. Minimum panel thickness 9mm. Screws into 10mm hole with CT-10.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.65

•

PC-SM2 Standard Surface Mount Male Clip

Mounting

Item number

Surface

606.8F20.222

Brown

•

Black

•

White

Fastmount Panel Mounting Systems Standard Profile Range

801

Adhesive fix super-groove base. Fits into PC-F1A, PC-SF1, PC-RF1 and PC-AF1.

PC-SM2H Surface Mount Heavy Duty Male Clip, 10kg

Surface

606.8F20.224

802

Male surface mount heavy duty clip with super groove base for increased loading. Mounts into PC-F1A, PC-SF1, PC-RF1 and PC-AF1. 10kg pull-out load per clip. Epoxy glue ﬁx. No special tools required for installation.

PC-F1A Standard Self-tapping Female Clip

TapFast

606.8F20.322

201

Mounts into 16.8mm hole drill with CT-07, CT-13. Compatible with male clips, PC-M1A, PC-M2H, PC-SM2 and PC-VM1. Install with CT-03.

PC-SF1 Standard Surface Mount Female Clip

Surface

606.8F20.322

101

Screw fix. See product sheet for details. Compatible with PC-M1A, PC-M2H, PC-SM2 and PC-VM1.

PC-RF1-B Standard Side Mount Female Clip

Side

606.8F20.322

143

Screw fixed to side of decks heads (use CT-18 install jig), for ceiling application. Suitable for other applications such as floor panels and cabinets. Compatible with male clips, PCM1A, PC-M2H, PC SM2 and PC-VM1.

3.66

PC-AF1 Standard Female Auto Fit Clip

Mounting

Item number

Auto Fit

606.8F20.322

White

Fastmount

Fastmount Panel Mounting Systems Standard Profile Range

121

Female push fit clip suitable for application requiring lateral adjustment. Fits all standard male clips: PC-M1A, PC-M2H, PC-SM2, PC-SM2H, and PC-VM1.

â&#x20AC;˘

Standard Profile Range Sample and Trial Kits

Specifically designed to evaluate Fastmount removable panel mounting styles

Item number

CD-03 Standard Profile A5 Sample Panel

606.8F50.200.000 Demonstrates PC-F1A, PC-M1A, PC-M2H, PC-SM2, PC-VM1 and PC-RF1 Standard Profile Range clips. Includes: CT-05 panel removal tool.

CT-06T Standard Profile Range Trial Kit Complete with Tools

606.8F60.201.060 Complete with clips and tools. Includes: PC-F1A x12, PC-M1A x12, PC-M2H x4, PC-SM2 x4, PC-SM2H, PC-VM1 x4, PC-RF1 x4, PC-SF1 x4, CP-01A x4, CT-01, CT-03, CT-05, CT-07, CT-09 and CT-10.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.67

Fastmount Panel Mounting Systems Standard Profile Range Standard Profile Range Installation Tools

Item number

CT-01 Standard Profile Drill, 10mm with Shoulder

606.8F44.205.010 Use with Standard Profile Range and Low Profile Range. For drilling through panel and pilot hole for CT-07.

CT-09 Standard Profile Drill, 10mm Forstner

606.8F44.205.090 Use with Standard Profile, Low Profile and Maxi Metal Range. To drill blind holes in the back of panels. See install guides and videos.

CT-07 Standard Profile Step Drill, Tungsten

606.8F44.205.070 Use with Standard Profile Range for PC-F1A, 16.8mm diameter tungsten tipped to drill out 10mm hole in frame. See install guides and video for correct use.

CT-013A Standard Profile Ă&#x2DC;6.8mm Carbine Step Drill

606.8F44.205.130 Use with Standard Profile Range. To drill holes in fibreglass, carbon fibre and kevlar laminates.

CT-15 Standard Tap Insertion Tool

606.8F44.206.150 Use with Standard Profile Range. Tap tool for tapping thread to fit PC-F1A into fibre glass, aluminium, or similar. Drill hole with CT-13A or drill out 10mm hole with CT-07 then tap.

3.68

Fastmount Panel Mounting Systems Standard Profile Range

Fastmount

Standard Profile Range Installation Tools

Item number

CP-01ST Centre Point Insertion Tool

606.8F40.204.016 Use to align holes in panel and frame when using blind holes in panel. Fits 10mm blind hole in panel (drilled with CT-09) or into PC-F1A, PC-SF1, PC-RF1 and PC-AF1. Stainless Steel tip option for hard material. Use CP-01A for softer materials.

CT-03 Standard Female Insertion Tool

606.8F44.207.030 Use with Standard Profile Range. For installation of selftapping female PC-F1A using battery drill with correct torque setting.

CT-10 Standard Self-tapping Male Clip Insertion Tool

606.8F44.207.100 Use with Standard Profile, Low Profile, and Panel Control Range. For installation of self-tapping male PC-M1A, PC-M2H, PC-VM1, PS-150, and LP-M8 using battery drill with correct torque setting.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.69

Fastmount Panel Mounting Systems Standard Profile Range Standard Profile Range Installation Tools

Item number

CT-08 Standard Installation Kit

606.8F44.201.080 Installation tools for Standard Profile Range of clips. One each CT-01, CT-03, CT-05, CT-07, CT-09, and CT-10 in plastic box.

CT-06S Standard Profile Range Service Kit

606.8F44.222.060 For on-board maintenance of Standard Profile Range clips. Includes: PC-M1A x24, PC-M2H x4, PC-SM2 x4, PC-SM2H x4, CT-10 male clip tool and CT-05 covered panel removal tool.

Additional installation tools > See page 3.84

3.70

Fastmount Panel Mounting Systems Low Profile Range

•

LP-M8A Low Profile Self-tapping Male Clip

Mounting

Item number

TapFast

606.8F22.122

White

Fastmount

•

Self-tapping and surface mount for a variety of substrates Suitable for rigid foam core, soft core materials, MDF and plasterboard 360 degree lateral adjustment, ﬁtting into a Ø35 hole

201

Screws into plywood and MDF type boards with 10mm hole. Mark with CP-08, drill with CT-09 and install with CT-10 install tool. Use with LP-F8 and LP-DF8 female clips.

LP-SM8As Low Profile Surface Mount Male Clip

Surface

606.8F22.222

801

Adhesive fix super groove base onto panel or frame. Can also be screw fixed with #6 gauge self-tapping screw. Use with LP-F8 or LP-DF8 female Low Profile Range clips.

LP-F8 Low Profile Self-tapping Female Clip

TapFast

606.8F22.322

201

Screws into plywood and MDF type boards with 25 to 25.4mm hole with CT-19 install tool. Use with LP-M8 and LP-SM8 male clips.

LP-DF8 Low Profile Self-tapping Female Clip, Coarse Thread

TapFast

606.8F22.322

401

Screws into 25mm hole into drywall plasterboard and soft core material (rigid foam/balsa) from 10mm thick with CT-19 install tool, in battery drill with correct clutch setting. Use with LP-M8 and LP-SM8 male clips.

LP-AF8 Low Profile Female Auto Fit Clip

Auto Fit

606.8F22.322

121

Female clip with lateral adjustment push fits into 35mm pre-drilled hole in deck head frame (grounds). Fits all Low Profile Range male clip halves. Designed for use with curved panels.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.71

Fastmount Panel Mounting Systems Low Profile Range

•

Speciﬁcally designed to evaluate Fastmount removable panel mounting styles

Low Profile Range Sample and Trial Kits

Item number

CD-08 Low Profile Range Sample Panel

606.8F50.220.000 Demonstration panel for Low Profile Range series. Includes: LP-F8, LP-M8, LP-SM8 and LP-AF8.

LP-08T Low Profile Trial Kit

606.8F60.221.080 Complete with clips and tools. Includes: LP-F8 x12, WLP-DF8 x4, LP-AF8 x4, LP-M8 x8, LP-SM8 x4, CP-08 x4, CT-05, CT-10 and CT-20 with product sheets and installation guide.

3.72

Fastmount Panel Mounting Systems Low Profile Range

Fastmount

Low Profile Range Installation Tools

Item number

CP-08ST Low Profile Centre Clip Insert

606.8F40.224.086 Stainless steel tip center points for use with Low Profile Range clips LP-F8 and LP-DF8. Used to mark hard panel materials where plastic center point (CP-08) will not work.

CT-19 Low Profile Insertion Tool

606.8F44.227.194 Aluminium install tool for female clips LP-F8 and LP-DF8 Low Profile Range. Use in battery drill with correct clutch setting.

CT-20 Low Profile Insertion Tool

606.8F44.227.206 Red plastic moulded install tool for female clips LP-F8 and LPDF8 Low Profile Range. Use in battery drill with correct clutch setting. For normal use, for large quantity installs use CT-19.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.73

Fastmount Panel Mounting Systems Low Profile Range Low Profile Range Installation Tools

Item number

LP-08Y Low Profile Installation Kit

606.8F44.221.060 Contains tools for installing Low Profile Range clips (LP-F8, LPDF8, LP-M8) and panel removal tool (covered panels). Plastic box with CT-05, CT-09, CT-10 and CT-20 x1.

CT-01 Standard Profile Drill, 10mm with Shoulder

606.8F44.205.010 Use with Standard Profile Range and Low Profile Range. For drilling through panel and pilot hole for CT-07.

CT-09 Standard Profile Drill, 10mm Forstner

606.8F44.205.090 Use with Standard Profile, Low Profile and Maxi Metal Range. To drill blind holes in the back of panels. See install guides and videos.

CT-10 Standard Self-tapping Male Clip Insertion Tool

Additional Installation Tools > See page 3.84

3.74

Fastmount Panel Mounting Systems Very Low Profile Range

• •

•

VL-03 Very Low Profile Clip Set

Mounting

Item number

Surface Recessed

606.8F24.122

Silver

Fastmount

•

Self-aligning secure mounting (min. 5kg per clip) Quick installation requires no special tools or skilled labour Clip lead-in for easy ﬁtting Can be screw ﬁxed with lateral adjustment

101

For surface or recessed mounting. Can be screw or glue fixed. Versatile clip able to be installed without special tools. Pull-out load 5kg per clip. VL-03 set packed 100 per bag with VL-M3 + VL-SS3 inner bag, VL-F3 in outer bag. Now supplied with stainless steel screw (VL-SS3).

VL-M3 Very Low Profile Male Screw on Surface Mount Clip

Surface

606.8F24.222

101

Male clip half for surface mounting. Can be screw fixed with lateral adjustment or glue fixed. Versatile clip able to be installed without special tools. Pull-out load 5kg per clip. The VL-M3 is used with VL-F3 + VL-SS3.

VL-F3 Very Low Profile Female Screw on Clip

Surface Recessed

606.8F24.322

101

Female clip half for surface or recessed mounting. Can be screw or glue fixed. Versatile clip able to be installed without special tools. Pull-out load 5kg per clip use with VL-M3.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.75

•

• •

VL-03H Very Low Profile Heavy Duty Clip Set

Self-aligning secure mounting (min. 10kg per clip) Quick installation requires no special tools or skilled labour Clip lead-in for easy ﬁtting Can be screw ﬁxed with lateral adjustment

Mounting

Item number

Surface recessed

606.8F24.522

Stainless steel

•

Black

Fastmount Panel Mounting Systems Very Low Profile Range

004

Male and female very low profile heavy duty system designed for surface or recessed mounting of heavier panels. 10 kg pull-out load per clip set. Can be glue or screw fixed with VL-SS3. No special tools required for installation. Supplied with stainless steel screw VL-SS3.

VL-M3H Very Low Profile Heavy Duty Male Clip

Surface

606.8F24.224

000

Male very low profile surface mount clip. Compatible with female clip VL-F3H. 10 kg pull-out load per clip set. Can be glue or screw fixed with VL-SS3. No special tools required for installation.

VL-F3H Very Low Profile Heavy Duty Female Clip

Surface recessed

606.8F24.124

101

Female very low profile heavy duty clip for surface or recessed mounting. Compatible with male clip VL-M3H. 10 kg pull-out load per clip set. Epoxy glue or screw fix with VL-SS3. No special tools required for installation.

VL-SS3 Very Low Profile Screw

Screw-in

606.8F24.523

004

Custom type 303 stainless steel screw for fixing VL-03 and VL-03H clip sets into panels as thin as 5.5mm. Pozi drive head. Supplied with VL-03 and VL-03H clip sets.

3.76

Fastmount Panel Mounting Systems Very Low Profile Range

â&#x20AC;˘

SpeciďŹ cally designed to evaluate Fastmount removable panel mounting styles

Fastmount

Very Low Profile Range Sample and Trial Kits

Item number

CD-VL3 Very Low Profile Sample Panel

606.8F50.240.000 Demonstration panel for Very Low Profile Range clip series. VL-03 = VL-F3 + VL-M3.

LP-03T Very Low Profile Trial Kit

606.8F60.241.030 Includes: VL-F3 x10, VL-M3 x10, VL-SS3 x10 and VL-CP x2 with metal tip, plus information pack.

Very Low Profile Range Installation Tools

Item number

VL-CP3 Very Low Profile Centre Point Insert

606.8F40.244.036 Center point for Very Low Profile Range clips VL-F3 and VL-M3. Use to mark hole centre in panel for correct clip alignment. Has stainless steel tip for marking panel or frame. Tip: push fits into either side of nylon moulding. See install guide.

Additional Installation Tools > See page 3.84

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.77

• • • •

MC-05 Metal Range Panel Clip Set, 5kg

Metal clip to withstand high temperatures Allows for tolerance & panel ﬂex (self-centering) Provides acoustic & vibration isolation 10kg pull-out load

Mounting

Item number

TapFast / Screw-on

606.8F30.122

Grey metal

Fastmount Panel Mounting Systems Metal Range

204

Ideal for fire rated panels the MC-05 is designed to withstand high temperatures and also provides acoustic and vibration isolation. The self-centering design allows for tolerance and panel flexing. Self-tapping with MC-IT5 and screw fit installation options. Can be used in conjunction with Standard Profile Range Clips. MC-05 = MC-F5 + MC-M5. 5kg pull-out load.

MC-10 Metal Range Maxi Clip Set, 10kg

TapFast / Screw-on

606.8F30.324

804

Ideal for fire rated panels the MC-10 is designed to withstand high temperatures and also provides acoustic and vibration isolation. The self-centering design allows for tolerance and panel flexing. Self-tapping with MC-IT5 and screw fit installation options. Can be used in conjunction with Standard Profile Range Clips. MC-10 = MC-F10 + MC-M5. 10kg pull-out load.

MC-F10 Metal Range Self-tapping Female Clip, 10kg

TapFast / Screw-on

606.8F30.324

204

Female half of metal clip set MC-10 (black centre), use with MC-M5. Self-tapping with MC-IT5, and screw fit installation with #5 gauge screws.

MC-F5 Metal Range Self-tapping Female Clip, 5kg

TapFast / Screw-on

606.8F30.322

804

Female half of metal clip set MC-05 (white centre), use with MC-M5. Self-tapping with MC-IT5, and screw fit installation with #5 gauge screws.

3.78

MC-M5 Metal Range Self-tapping Male Clip, 5kg

Mounting

Item number

TapFast

606.8F30.222

Grey metal

Fastmount

Fastmount Panel Mounting Systems Metal Range

204

Self-tapping male half of Maxi Metal Clip Set fits MC-F5 and MC-F10. Install with MC-IT5.

â&#x20AC;˘

Sample kits are specifically designed to evaluate the Fastmount Metal Range panel mounting system

Metal Range Sample Kits

Item number

CD-MC5 Metal Range Sample Panel Kit

606.8F50.300.000 Demonstration panel for Maxi Metal Range clips with MC-F5 + MC-M5H.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.79

Fastmount Panel Mounting Systems Metal Range Metal Range Installation Tools

Item number

MC-CP5 Metal Range Centre Point Insert

606.8F40.304.056 Centre point fits MC-F5 metal clip. Use to mark hole centre in panel, for correct clip alignment. Has stainless steel tip for marking panel. Refer to install guide.

MC-IT5 Install Tool for Metal Clip MC-F5 and MC-M5

606.8F44.418.054 For installation of self-tapping male MC-M5H, can also be used for MC-F5 into plywood or similar. Use battery drill with correct torque setting. Refer to installation video.

CT-09 Standard Profile Drill, 10mm Forstner

606.8F44.205.090 Use with Standard Profile, Low Profile and Maxi Metal Range. To drill blind holes in the back of panels. See install guides and videos.

Additional Installation Tools > See page 3.84

3.80

Fastmount Panel Mounting Systems Panel Control Range

• • •

Fastmount

•

Secures heavy panels Easy one person removal of large panels Prevents panels falling during ﬁre exit Works with existing Fastmount clips

PS-150E Panel Safe Easy Fit Self-tapping Clip, 150mm

Mounting

Item number

TapFast

606.8F36.122.205

Suspends panel on removable stainless steel wire strops. Suitable for use in conjunction with any of the Fastmount range of clips. Standard drop length 150mm, with custom lengths available on request. Install with CT-10. Note: custom products have a six-week lead time.

PS-S150E Panel Safe Easy Fit Surface Mount Clip, 150mm

Surface

606.8F36.122.805

Suspends panel on removable stainless steel wire strops. Suitable for use in conjunction with any of the Fastmount range of clips. Standard drop length 150mm, with custom lengths available on request. Glue or screw fix to panel. Note: custom products have a six-week lead time.

PS-150 Panel Safe Clip, 150mm

TapFast

606.8F36.122.215

Suspends panel on removable stainless steel wire strops. Suitable use in conjunction with any of the Fastmount range of clips. Standard drop length 150mm, with custom lengths available on request. Install with CT-07, CT-03 and CT-10. Note: custom products have a six-week lead time.

PS-Custom Panel Safe Customer Length

TapFast

606.8F36.100.000*

Specify required type and length. Use with Fastmount system clips. PS-S custom, surface mount option and easy fit or standard options available. Custom lengths from 50mm to 500mm. *Available on request.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.81

Fastmount Panel Mounting Systems Textile Range

•

• •

•

TC-06 Textile Range Clip Set

Enables the attachment of soft furnishings to hard surfaces and makes furnishings quick to install and remove Easy alignment to replace the cushion Invisible fixing – no visible domes, screws, straps or hook and loop 10kg break-out load

Mounting

Item number

Screw-on

606.8F37.122.060

Textile Clip Set = TC-M6 + TC-F6 Secure textile and soft furnishing clip system. Ensures fast, precise cushion fixing, and fast cushion removal.

TC-F6 Female Textile Clip

Screw-on

606.8F37.322.260

Enables the attachment of soft furnishings to hard surfaces and makes furnishings quick to install and remove. High quality, secure finish. Easy alignment to replace the cushion. Invisible fixing. 10kg break-out load.

TC-M6 Male Textile Clip

Screw-on

606.8F37.222.160

TC-R6 Textile Range Clip Removal Tool

606.8F44.418.060 No force required to remove the furnishing – simply press one of the three buttons to disengage the block. Saves removal time for staff and crew.

3.82

Fastmount Panel Mounting Systems Textile Range

Fastmount

Textile Range Sample and Trial Kits

Item number

TC-06T Textile Range Sample Panel and Trial Kit

606.8F60.261.060 A4 size cushion sample panel demonstrating TC-F6 and TC-M6 from the Textile Range. 4 x TC-F6, 4 x TCM6, 2 x TC-CP6, 1 x TC-R6.

Textile Range Installation Tools

Item number

TC-CP6 Textile Range Centre Point Insert

606.8F40.404.060 Textile Range centre point with stainless steel tip to mark hole centre in panel for correct clip alignment. See install guide for additional information.

Additional Installation Tools > See page 3.84

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.83

Fastmount Panel Mounting Systems Additional Installation Tools

â&#x20AC;˘

Installation tools designed specfically for the Fastmount panel mounting systems

Item number

CT-12 HSS Countersink Drill Bit, 31mm with 10mm Shank

606.8F44.415.054 To be used to countersink entry edge of hole (1-2mm) in hard materials such as MDF, hard plywood, fibre glass, plastic. Use when drilling holes for PC-M1B, PC-M2H, PC-VM1, PC-VM1H, LP-M8, LP-F8 and LP-DF8.

CT-18 Guide Drill

606.8F44.415.184 Use with Standard Profile Range. Drill guide for PC-RF1 mounting options.

CT-05 Panel Removal Tool

606.8F44.418.050 Stainless steel tool for removing covered (upholstered) panels. Do not use with painted panels.

CT-17 Panel Removal Tool, Painted Panel

606.8F44.418.170* Panel removal and handling, using a glass suction cup for painted and prefinished panels. Always use two glass suckers to control panel removal.

CT-09DG Drill Gauge for CT-09 Drill Bit

606.8F44.205.091 Drill Gauge for use with CT-09 drill bit. Designed for depth control when blind drilling for Standard and Low ProďŹ le range male clips. Machined aluminium housing, anodised red for durability. NOTE: Sold separately to CT-09.

3.84

Fastmount Panel Mounting Systems SuperGroove™ Adhesive

• • •

Fastmount

•

High strength 2-part glue bonds to most substrates Quick 10-minute curing Non-toxic Ideal for Fastmount SuperGroove™ surface mount clips

Item number

CG-3010 SuperGroove™ Adhesive, 30ml

606.8F38.200.030* Fastmount SuperGroove Adhesive™ 30ml twin tube manual dispenser for use with the Fastmount Surface Mount range. 10-minute cure, solvent-free, non-toxic, no VOCs, RoHS and REACH compliant, 12-month shelf life. Ideal for small installations and emergency repairs. Proportional 1:1 mixing. No additional equipment required.

CG-40010 SuperGroove™ Adhesive, 400ml

606.8F38.200.400* Fastmount SuperGroove Adhesive™ 400ml twin tube dispenser with self-mixing nozzle for use with Fastmount Surface Mount range. 10-minute cure, solvent-free, nontoxic, no VOCs, RoHS and REACH compliant, 12-month shelf life. Ideal for large scale installations. Supplied with two self-mixing nozzles for proportional mixing. Use with SuperGroove Adhesive Gun (sold separately). Additional self-mixing nozzles can be purchased.

CG-400MT SuperGroove™ Adhesive Self-mixing Nozzles

606.8F38.201.000* Pack of 5 disposable self-mixing nozzles designed for use with CG-40010 SuperGroove Adhesive™ 400ml. NOTE: Glue not included.

CG-400G SuperGroove™ Adhesive Gun for 400ml Tube

606.8F38.201.400* SuperGroove Adhesive™ gun designed for use with CG-40010 SuperGroove Adhesive™ 400ml twin tube. Robust steel construction.

Download supporting documentation from the Titus Tekform website titustekform.com.au

3.85

x.1

Download supporting documentation from the Titus Tekform website titustekform.com.au

Fasteners

x.2

Fasteners

Product Guide

Screws Page

Woodfast Countersunk

4.4

Hi-Lo Funnel Head

4.5

ChipFast Countersunk

4.6

SupaTop Countersunk

4.7

TapFast

4.8

CabFast

4.9

SoloFast

4.9

EuroFast

4.10

HandleFast

4.11

CombiFast

4.12

Brad Nails

4.2

C Series

4.13

C1 Series

4.13

DA Series

4.14

Staples 80 Series Wire Staples

4.15

90 Series Wire Staples

4.15

Accessories Anchors

4.16

WallMate

4.16

Wall Plugs

4.16

Cover Caps

4.17

FastEdge Accessories

4.19

Conversion Tables

4.20

4.3

• • •

WoodFast Countersunk Reinforced

Length

Drive type

Length (mm)

Technical details

Thread gauge

•

Particle board screw with long and coarse thread Reinforced double countersunk head Deeper recess provides for higher torque 40° thread pitch

Item number

Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2 Philips Drive No 2

3.5 3 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 4 4 4 4 4.5 5

13 16 16 20 25 32 40 16 20 25 28 32 40 45 50 57 65 75

611.8K16.235 611.8K16.230 611.8K16.235 611.8K16.235 611.8K16.235 611.8K16.235 611.8K16.235 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.240 611.8K16.245 611.8K16.250

Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2 Pozidrive No 2

3.5 3 3.5 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 4 4 4 4.5 4.5 5

13 16 16 20 25 28 32 40 16 20 25 28 32 40 45 50 57 65 75

611.8K24.235 611.8K24.230 611.8K24.235 611.8K24.235 611.8K24.235 611.8K24.235 611.8K24.235 611.8K24.235 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.240 611.8K24.245 611.8K24.245 611.8K24.250

Zinc plated

Fasteners WoodFast Countersunk Screw

> > > > > > > > > > > > > > > > >

013 016 016 020 025 032 040 016 020 025 028 032 040 045 050 057 065 075

Made of steel WoodFast Countersunk Reinforced

Length

Made of steel

4.4

> > > > > > > > > > > > > > > > > >

013 016 016 020 025 028 032 040 016 020 025 028 032 040 045 050 057 065 075

Fasteners Hi-Lo Funnel Head Screws • •

•

WoodFast Countersunk Raised Head

3.8 16

•

Item number

611.8K16.338

Nickel plated

Philips Drive No 2

Black

Drive type

Length (mm)

Technical details

Thread gauge

Fasteners

•

Hi-Lo™ screws have a twin thread for faster insertion ‘Hi’ threads and ‘Lo’ threads combine to give excellent pull-out strength in chipboard Funnel head design means no countersinking Steel is case-hardened for extra strength

016

Perfect for use with hinges and base plates

Length

1056

Hi-Lo Funnel Head

POZIDRIV No.2 RECESS

S 5-6 0066 6-8 0071 0077 11.5-13 12-14 0172

L 18-19 32-33 44-45.5 53.5-55

Ø7.6 Length L

Philips Drive No 2

611.8F13.440

045

Pozidrive No 2

611.8F23.440

045

•

POZIDRIV No.2 RECESS

•

4-5

47-48

Ø7.9

Ø5

•

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.5

• • •

ChipFast Countersunk Nib

Length

Drive type

Length (mm)

Technical details

Thread gauge

•

Self-countersinking head with nibs 3/4 thread Coarse thread Needle screw point

Item number

Philips Drive No 2

3.7

611.8C14.240

016

Philips Drive No 2

611.8C14.240

019

Philips Drive No 2

611.8C14.240

025

Philips Drive No 2

611.8C14.240

028

Philips Drive No 2

611.8C14.240

030

Philips Drive No 2

611.8C14.240

032

Philips Drive No 2

611.8C14.240

035

Philips Drive No 2

611.8C14.240

038

Philips Drive No 2

611.8C14.240

040

Philips Drive No 2

611.8C14.240

045

Philips Drive No 2

611.8C14.240

050

Philips Drive No 2

611.8C14.240

057

Philips Drive No 2

611.8C14.240

065

Philips Drive No 2

611.8C14.250

075

Philips Drive No 2

100

611.8C14.250

100

Pozidrive No 2

611.8C24.240

020

Pozidrive No 2

611.8C24.240

025

Pozidrive No 2

611.8C24.240

028

Pozidrive No 2

611.8C24.240

030

Pozidrive No 2

611.8C24.240

032

Pozidrive No 2

611.8C24.240

035

Pozidrive No 2

611.8C24.240

038

Pozidrive No 2

611.8C24.240

040

Pozidrive No 2

611.8C24.240

045

Pozidrive No 2

611.8C24.240

050

Pozidrive No 2

611.8C24.240

057

Pozidrive No 2

611.8C24.240

065

Pozidrive No 2

611.8C24.250

075

Zinc plated

Fasteners ChipFast Countersunk Nib Screws

Made of steel ChipFast Countersunk Nib

Length

Made of steel

4.6

Fasteners SupaTop Countersunk Nib Head Hole Screws

•

SupaTop Countersunk Nib Head Hole

Length

Item number

Philips Drive No 2

4.5

611.8H18.245

025

Philips Drive No 2

4.5

611.8H18.245

028

Philips Drive No 2

4.5

611.8H18.245

030

Philips Drive No 2

4.5

611.8H18.245

035

Philips Drive No 2

4.5

611.8H18.245

040

Philips Drive No 2

4.5

611.8H18.245

045

Philips Drive No 2

4.5

611.8H18.245

050

Philips Drive No 2

4.5

611.8H18.245

060

Philips Drive No 2

4.5

611.8H18.245

065

Philips Drive No 2

4.5

611.8H18.245

070

Pozidrive No 2

4.5

611.8H28.245

025

Pozidrive No 2

4.5

611.8H28.245

028

Pozidrive No 2

4.5

611.8H28.245

030

Pozidrive No 2

4.5

611.8H28.245

035

Pozidrive No 2

4.5

611.8H28.245

040

Pozidrive No 2

4.5

611.8H28.245

045

Pozidrive No 2

4.5

611.8H28.245

050

Pozidrive No 2

4.5

611.8H28.245

060

Pozidrive No 2

4.5

611.8H28.245

065

Pozidrive No 2

4.5

611.8H28.245

070

Zinc plated

Drive type

Length (mm)

Technical details

Thread gauge

Fasteners

•

Reinforced double countersunk head with self-countersinking nibs Suitable for long stem head hole covers Deeper recess provides for higher torque

Made of steel SupaTop Countersunk Nib Head Hole

Length

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.7

TapFast Countersunk

Length

Item number

Philips Drive No 2

3.5

611.8I12.235

013

Philips Drive No 2

3.5

611.8I12.235

016

Philips Drive No 2

3.5

611.8I12.235

032

Philips Drive No 2

611.8I12.240

016

Philips Drive No 2

3.5

611.8I19.235

016

Philips Drive No 2

611.8I19.240

016

Zinc plated

Drive type

Length (mm)

Technical details

Thread gauge

Fasteners TapFast Screws

Made of steel TapFast Panhead

Length

Made of steel

4.8

CabFast Wafer Head

Item number

Philips Drive No 2

611.8B17.140

016

Philips Drive No 2

611.8B17.140

028

Philips Drive No 2

611.8B17.140

032

Philips Drive No 2

611.8B17.140

050

Philips Drive No 2

611.8B17.140

065

Pozidrive No 2

611.8G22.050

050

Pozidrive No 3

611.8G22.070

050

Zinc plated

Drive type

Length (mm)

Technical details

Thread gauge

Fasteners

Fasteners CabFast and SoloFast Screws

Length

• • •

White button head 3/4 thread Course thread

Made of steel SoloFast Connecting

•

Cabinet construction screw For pre-drilled stepped holes

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.9

Fasteners EuroFast Screws â&#x20AC;˘

Diameter

Countersunk screw

Length

Made of steel

4.10

Item number

Countersunk Pozidrive No 2

611.8E22.360

010

Countersunk Pozidrive No 2

611.8E22.360

013

Countersunk Pozidrive No 2

6.3

611.8E22.363

710

Countersunk Pozidrive No 2

6.3

611.8E22.363

713

Countersunk Pozidrive No 2

6.3

611.8E23.363

810

Countersunk Pozidrive No 2

6.3

611.8E23.363

813

Drive type

Nickel plated

Length (mm)

EuroFast Screw

Head diameter (mm)

Technical details

Hardware assembly screw For 5mm pre-drilled holes

Screw diameter (mm)

â&#x20AC;˘

HandleFast Trusshead

Length

Item number

Trusshead

611.8L35.245

010

Trusshead

611.8L35.245

012

Trusshead

611.8L35.245

016

Trusshead

611.8L35.245

020

Trusshead

611.8L35.245

022

Trusshead

611.8L35.245

025

Trusshead

611.8L35.245

032

Trusshead

611.8L35.245

035

Trusshead

611.8L35.245

038

Trusshead

611.8L35.245

042

Trusshead

611.8L35.245

045

Trusshead

611.8L35.245

050

â&#x20AC;˘

Zinc plated

Type

Length (mm)

Technical details

Thread type

Fasteners

Fasteners HandleFast Screws

Combination head

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.11

CombiFast Insert Nuts

Length

Made of zinc

4.12

Insert Nut Type, Headed

1/4

611.8D22.014

Insert Nut Type, Headed

611.8D22.060

132

Insert Nut Type, Headed

611.8D22.060

616

Insert Nut Type, Unheaded

611.8D22.360

Yellow zinc

Item number

Zinc plated

Type

Length (mm)

Technical details

Thread type

Fasteners CombiFast Screws

202

132

Brad Nails C Series

Length Gauge

Item number

Brad Nail

16G

611.8P19.316

019

Brad Nail

16G

611.8P19.316

025

Brad Nail

16G

611.8P19.316

630

Brad Nail

16G

611.8P19.316

632

Brad Nail

16G

611.8P19.316

635

Brad Nail

16G

611.8P19.316

638

Brad Nail

16G

611.8P19.316

640

Brad Nail

16G

611.8P19.316

645

Brad Nail

16G

611.8P19.316

650

Brad Nail

16G

611.8P19.316

664

Brad Nail

18G

611.8P19.318

813

Brad Nail

18G

611.8P19.318

815

Brad Nail

18G

611.8P19.318

820

Brad Nail

18G

611.8P19.318

825

Brad Nail

18G

611.8P19.318

830

Brad Nail

18G

611.8P19.318

835

Brad Nail

18G

611.8P19.318

840

Brad Nail

18G

611.8P19.318

845

Brad Nail

18G

611.8P19.318

850

Galvanised

Type

Length (mm)

Technical details

Thread gauge

Fasteners

Fasteners Brad Nails

Made of steel Brad Nails C1 Series

Length Gauge

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.13

Brad Nails DA Angle Series

Made of steel

4.14

Item number

Brad Nail

15G

611.8P19.415

025

Brad Nail

15G

611.8P19.415

032

Brad Nail

15G

611.8P19.415

038

Brad Nail

15G

611.8P19.415

045

Brad Nail

15G

611.8P19.415

050

Galvanised

Type

Length (mm)

Technical details

Thread gauge

Fasteners Brad Nails

Wire Staples 80 Series

Length

Item number

Staples

611.8P22.080

006

Staples

611.8P22.080

010

Staples

611.8P22.080

012

Staples

611.8P22.080

014

Type

Galvanised

Length (mm)

Technical details

Thread gauge

Fasteners

Fasteners Staples

Made of steel Wire Staples 90 Series

Staples

18G

611.8P22.090

016

Staples

18G

611.8P22.090

025

Staples

18G

611.8P22.090

028

Staples

18G

611.8P22.090

032

Staples

18G

611.8P22.090

038

5.8 Length

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.15

Anchors

Diameter

Length

611.8Q26.660

000

Nylon Anchor, Philips Drive No. 2

611.8Q26.670

000

611.8Q26.100

Red

Green

Nylon Anchor, Philips Drive No. 2

Zinc plated

Item number

Type

Yellow zinc

Length (mm)

Technical details

Diameter (mm)

Fasteners Fastener Accessories

Made of nylon and steel Wallmate for Plasterboard, Philips Drive No. 2

WallMate

Diameter

000

Length

Made of zinc Wall Plugs

50m Length

Diameter

Made of plastic

4.16

Wall Plug

611.8Q26.070

050

Wall Plug

6.5

611.8Q26.650

035

Red Spaghetti (For fixing into plasterboard)

Ă&#x2DC;5.5mm inner Ă&#x2DC;6mm Drill

611.8Q26.060

500

Technical details

Finish

Item number

White

611.8Q24.012.001

SupaTop HH Cap

White

611.8Q25.013.001

SupaTop HH Cap

New Antique White

611.8Q4.012.004

SupaTop HH Cap

Black

611.8Q4.013.004

SupaTop HH Cap

Folkstone Grey

611.8Q4.013.007

Type

Star Screw Cap Diameter

Star Screw Caps

Diameter (mm)

Fasteners

Fasteners Cover Caps

Made of plastic

Diameter

SupaTop HH Caps

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.17

FastCap

Thickmess (mm)

Technical details

Diameter gauge (mm)

Fasteners FastCap Cover Caps

Finish

Item number

0.4

White

611.8Q24.225.001

0.4

Black

611.8Q24.225.002

FastCap

0.4

Folkstone Grey 611.8Q24.225.007

FastCap

0.4

Antique White

611.8Q24.225.005

FastCap

0.4

White

611.8Q24.218.001

FastCap System 6 24 x 21

0.4

White

611.8Q24.614.001

FastCap System 6 24 x 21

0.4

Antique White

611.8Q24.614.004

FastCap System 6 24 x 21

0.4

Black

611.8Q24.614.002

FastCap System 6 24 x 21

0.4

Folkstone Grey 611.8Q24.614.007

FastCap

0.4

Wenge

611.8Q24.214.037

FastCap

0.4

Beech

611.8Q24.214.028

FastCap

0.4

Antique White

611.8Q24.214.004

FastCap

0.4

Black

611.8Q24.214.002

FastCap

0.4

Folkstone Grey 611.8Q24.214.007

FastCap

0.4

Pecan

611.8Q24.214.038

FastCap

0.4

Mahogany

611.8Q24.214.039

FastCap

0.4

White

611.8Q24.214.001

Type

FastCap FastCap

Made of PVC FastCap

4.18

FastEdge Edge Tape

15m EdgeTape

0.4

611.8Q24.222

151

76m EdgeTape

0.4

611.8Q24.222

761

76m EdgeTape

0.4

611.8Q24.222

15m FastCap Speed Tape

0.4

611.8Q24.225

Black

Item number

Type

White

Thickmess (mm)

Technical details

Width (mm)

Fasteners

Fasteners FastEdge and Accessories

762

Made of PVC FastCap Speed Tape

FastCap Hole Punch Kit

FastCap Hole Punch Pro Kit

611.8Q24.213.000

FastCap Accuscribe Pro

611.8Q24.203.000

• •

•

151

Easily maintain a consistent scribe offset Ideal for scribing trim on kitchen cabinets, architectural mouldings, counter tops, splash guards, tile and even flooring Fits a standard pencil or sharpie

Download supporting documentation from the Titus Tekform website titustekform.com.au

4.19

Fasteners

Conversion Tables Pilot Hole Detail Screw Gauge Imperial

Metric

Pilot Hole MDF

Pilot Hole Partical Board

3.2

2.4mm

1.45mm

3.5

2.6mm

1.6mm

3.8

2.7mm

1.65mm

4.2

3.0mm

1.95mm

4.5

3.3mm

2.1mm

Metric â&#x20AC;&#x201C; Imperial Conversion Imperial Gauge

Exact Metric Equivalent

Nominal Metric Equivalent

2.5

2.8

3.0

3.2

3.0

3.5

3.8

4.0

4.2

4.0

4.5

10g

4.8

5.0

12g

5.5

14g

6.2

6.0

Metric â&#x20AC;&#x201C; Imperial Conversion Imperial

Metric

Imperial

Metric

1/32

0.8

17/32

13.5

1/16

1.6

9/16

14.3

3/32

2.4

19/32

15.1

1/8

3.2

5/8

15.9

5/32

21/32

16.7

3/16

4.8

11/16

17.5

7/32

5.6

23/32

18.3

1/4

6.4

3/4

19.1

9/32

7.1

25/32

19.8

5/16

13/16

20.6

11/32

8.7

27/32

21.4

3/8

9.5

7/8

22.2

13/32

10.3

29/32

7/16

11.1

15/16

23.8

15/32

11.9

31/32

24.6

1/2

12.7

25.4

4.20

Cabinet Hardware

General Hardware & Tools

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.1

General Hardware and Tools Product Guide

Cabinet Hardware Page

Shelf Supports

5.4

Bump-ons, Protectors, Glides & Rails

5.6

Door Catches and Latches

5.10

Joiners and Connectors

5.13

Joining Plates

5.14

Brackets and Cable Entry Grommets

5.15

Clips

5.16

Castors

5.17

Bed Fittings

5.19

Furniture Locks Cylinder Locks

5.20

Striker Plates

5.22

Central Locking Systems

5.23

5.2

General Hardware & Tools Waste Plates

5.24

Drill Bits

5.25

Saw Blades

5.28

Files

5.29

Stan the Stand

5.29

Tool Storage

5.29

Liquid Laminate

5.30

Repair Crayons

5.31

Filler

5.32

Safety Materials Nuisance Dust Mask

5.33

Disposable Respirators

5.33

Disposable Ear Plugs

5.33

5.3

Shelf Support, Flat

Finish

Diameter (mm)

Cabinet Hardware Shelf Supports

Item number

Nickel Plated

605.8A38.119.650

Nickel Plated

7.5

605.8A38.119.750

Brass Bush

605.8A38.180.010

Nickel Plated

7.5

605.8A38.175.651

Brass Pin

605.8A38.180.020

605.8A38.214.650

Clear

605.8A38.210.830

White

605.8A38.210.877

Nickel Plated

605.8A38.216.650

Made of steel Shelf Support Bush

Made of steel 15 x 20mm Nickel Plated

Shelf Support with Safety Pin

Made of steel Shelf Support with Safety Pin

Made of steel and plastic Shelf Support

Made of steel

5.4

3mm Shelf Support with Pin

Nickel Plated

001912.847.311

Nickel Plated

605.8A38.218.650

Nickel Plated

605.8A38.220.650

19.3

2.5

7.5

Item number

Finish

Diameter (mm)

Cabinet Hardware

Cabinet Hardware Shelf Supports

Ă&#x2DC;3

Ă&#x2DC;5 10

Made of zinc Shelf Support, Rock-in

Made of steel Shelf Support for Glass

Made of steel and plastic Centre Clips

.104.030

.104.020

605.8A60.104.030

With grommets Clear

605.8A60.104.020

Without grommets Clear

605.8A60.106.030

With grommets Clear

605.8A60.106.020

Made of plastic

End Clips

.106.030

Without grommets Clear

.106.020

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.5

Diameter (mm)

Clear Bump On

Thickness (mm)

Cabinet Hardware Bump Ons

Item number

605.8A28.000.030

1.5

605.8A28.000.015

2.2

7.9

605.8A28.079.022

2.2

8.5

605.8A28.085.022

4.8

9.5

605.8A28.095.048

1.5

12.7

605.8A28.127.015

3.8

12.7

605.8A28.127.038

605.8A28.000.003

Made of plastic White Bump On

Made of foam

5.6

Width (mm)

Corner Block

Colour

Length (mm)

Cabinet Hardware

Cabinet Hardware Corner Protectors and Glides

Item number

Natural

605.8A36.045.200

Natural

605.8A36.060.600

Made of plastic Corner Protector Glide

White

605.8A36.050.001

Made of PVC Tack-on Glide

Beige

605.A850.016.000

Beige

605.A850.019.000

Made of Plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.7

Adjustable Plinth Foot Glide with Bracket and Cap

Length (mm)

Cabinet Hardware Plinths & Glides

Item number

605.8A50.510.050

3/8 thread 50

605.8A50.538.025

5/16 thread 50

605.8A50.516.025

5/16 thread 50

605.8A50.516.050

Made of zinc-plated steel Adjustable Plinth Stem Glide

Made of steel and plastic Adjustable Glide Stem, Ă&#x2DC;28mm Base

Made of steel and plastic

5.8

Snap-off Furniture Wedge

Cabinet Hardware Length (mm)

Finish

Dimensions (mm)

Cabinet Hardware Wedges, Rails & Filing Systems

Brown

Item number

605.A850.600.004

Made of plastic 2 x 1 Pine Rail

White

3600

605.8A10.019.361

Made of pine Filing System Frame

Chrome

273 x 390 x 420

603.8C50.149.500

Made of steel Filing System Runner

White

2400

603.8C50.149.510

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.9

Cabinet Hardware Door Catches and Latches

Item number

605.8A36.010.010

Gripper Catch

Made of steel and plastic 605.8A36.010.020

Roller Catch

Made of zinc 605.8A36.020.001

Daisy Inline Catch

Made of plastic 605.8A36.025.001

Daisy Side Mount Catch

Made of plastic

5.10

White

Cabinet Hardware

Cabinet Hardware Door Catches and Latches

Item number

Mini Touch Latch

605.8A36.010

030

605.8A36.030

001

605.8A36.030

002

Made of steel and plastic Corna Side Bi-fold Door Catch

Made of plastic Corna Top Mount Catch

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.11

Cabinet Hardware Door Catches

Item number

605.8A36.030.003

Corna Slide Door Protector Catch

Made of plastic White 605.8A36.040.061

Magnetic Catch, 6kg

Brown 605.8A36.040.064 â&#x20AC;˘

Includes steel striker plate

Made of steel and plastic 605.8A36.040.000

Catch Striker Plate

â&#x20AC;˘

Made of steel

5.12

To use with magnetic catch

Benchtop Connector, ∅35mm

Width (mm)

Length (mm)

Cabinet Hardware

Cabinet Hardware Joiners and Connectors

Item number

∅35mm 65

605.8A24.035.065

∅35mm 150

605.8A24.150.065

∅25mm 85

605.8A24.025.025

∅35mm 85

605.8A24.085.035

Made of steel Zipbolt Benchtop Connector

Made of steel Benchtop Connector Plate, Black

118

605.8A24.118.730

16.5

605.8A24.080.000

Made of plastic Steel Figure 8 Joiner

Made of plastic and metal Wood Joiner Biscuits

No. 0

605.8A26.021.000

No. 5

605.8A26.021.050

No. 10

605.8A26.021.010

No. 20

605.8A26.021.020

Made of MDF

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.13

Cabinet Hardware Joining Plates • • •

Rigid and strong No pre-drilling Spacer pegs provide an even 2mm gap Sleek design

Technical Details

Nickel plated

•

Item number

360.1222

054.00

360.1230

054.00*

85 105

Joining Plate, 105mm

Ø4.5

3.5

Made of steel

3 Ø4.5

20 43

Joining Plate, 43mm

3.5

Made of steel

Recommended number of joining plates by panel width

No. of joining plates 4 3 2

500 800 1200 panel width (mm)

5.14

Width (mm)

Cabinet Hardware

Finish

Length (mm)

Angle Brackets

Diameter (mm)

Cabinet Hardware Brackets, Cable Entry Grommets and Cap Holes

Zinc Plated

605.8A26.025.025

Zinc Plated

605.8A26.038.038

Zinc Plated

605.8A26.050.050

Item number

Made of steel Cable Entry Grommets

White

605.8A30.060.001

Black

605.8A30.060.002

Beige

605.8A30.060.003

Cream

605.8A30.060.004

Silver Grey

605.8A30.060.016

Dove Grey

605.8A30.060.007

White

605.8A30.080.001

Black

605.8A30.080.002

Beige

605.8A30.080.003

Grey

605.8A30.080.007

Silver Grey

605.8A30.080.016

White

605.8A31.035.001

Made of plastic Cap Holes

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.15

Cabinet Hardware Clips

Table Clip

Size (mm)

Colour

Item number

3.65 x 18.5

Gold Zinc Plated

605.8A32.365.185

60mm

Zinc Plated

605.8A32.500.000

4mm

Clear Plastic

605.8A32.500.050

50 x 16 x 20

White

605.8A36.056.080

White

605.8A36.010.040

Made of steel Playground Clip

Made of steel Mirror Clip

Made of plastic Cleat Easy Clip Connector

Made of plastic Door Stop with Clip

Made of plastic

5.16

Wheel diameter (mm)

Castor, Unhooded with Socket

Cabinet Hardware

Cabinet Hardware Castors

Item number

605.8A50.402.000

605.8A50.422.000

605.8A50.503.000

605.8A50.504.000

Made of plastic and steel Castor, Hooded without Brake

Made of plastic and steel Castor, Hooded Heavy Duty without Brake

Made of plastic and steel Castor, Hooded Heavy Duty with Brake

Made of plastic and steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.17

Wheel diameter (mm)

Cabinet Hardware Castors

Castor, Swivel, 30kg

.501.001

Item number

With brake 50

605.8A50.501.001

Without brake 50

605.8A50.502.001

605.8A50.801.002

With brake 80

605.8A50.803.000

Without brake 80

605.8A50.802.002

.502.001

Made of rubber Castor, Heavy Duty Rigid, 200kg

Made of plastic Castor, Heavy Duty Swivel, 200kg

.803.000

.802.002

Made of plastic

5.18

Bed Bracket

Length (mm)

Cabinet Hardware

Cabinet Hardware Bed Fittings

Item number

120

605.8B22.192.000

123

605.8B22.190.000

605.8B22.191.000

Made of steel Bed Fittings for Water Beds

Made of steel Bed Fitting Centre Rail

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.19

601 Rim Lock Housing with Barrel and Key

628 Double Door Lock Housing with Barrel and Key

604 Push Lock Housing with Barrel and Key

5.20

Nickel plated

Furniture Locks Cylinder Locks

Lock type

Key type

Keyed

Item number

Rim

Barrel

Alike

605.8B10.601

001

Rim

Barrel

Alike

605.8B10.601

002

Rim

Barrel

Alike

605.8B10.601

003

Rim

Barrel

Alike

605.8B10.601

004

Rim

Barrel

Alike

605.8B10.601

005

Rim

Barrel

Alike

605.8B10.601

006

Rim

Barrel

Alike

605.8B10.601

007

Rim

Barrel

To Differ

605.8B10.601

000

Double Door Rim

Barrel

Alike

605.8B10.628

001

Double Door Rim

Barrel

Alike

605.8B10.628

002

Push

Barrel

Alike

605.8B10.604

001

Push

Barrel

To Differ

605.8B10.604

000

Furniture Locks

Furniture Locks Cylinder Locks

Lock type

611 Push Lock Housing with Barrel and Key

Key type

Keyed

Item number

Push Cam

Barrel

Alike

605.8B10.611.001

Push Cam

Barrel

Alike

605.8B10.611.003

Push Cam

Barrel

Alike

605.8B10.611.004

Push Cam

Barrel

To Differ

605.8B10.611.000

Barrel

Alike

605.8B10.215.000

CC Series Lock with Removable Barrel, Keyed Alike Master key

Barrel

605.8B10.205.000

Removable key

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.21

Furniture Locks Striker Plates

Item number

Right Angle Lock Striker Plate, 30mm

605.8B10.600.030

Made of steel Standard Z Striker Plate for Double Door

605.8B10.600.020

Made of steel

5.22

Central Locking System

•

Furniture lock with cylinder Screw-on mounting in front panel

Furniture Locks

•

600

One set lock consists of

Lock

1 pce

Rosette

1 pce

Key

1 pair

600

Ø18

Lock 605.8B10.000.000

Ø18

32Item number

600

Assembly

Mounting and drilling details

32 32 20

min. Ø19-Ø20

min. 24

Accessories

bar guide

600

Bar Guide 605.8B10.010.000

3 pcs

Locking Pin L20005

3 pcs

Bar L=600mmm 605.8B10.015.000

1 pce

600

22-25mm

600

bar

21-30

adjustment pin

L=1200mm L20016

Made of steel Chipboard screws for fixing 611.8K16.240.020 4

7.5 16

7.5 20

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.23

Builders Hardware Waste Plates • •

Cover for plumbing misplaced drilling Stick on around pipe to cover chips or oversized hole

Size

Corna Plumbing Waste Plates

Blank Sheet 210 x 295mm

605.838.210.295

Made of steel

5.24

Item number

605.838.210.295

40mm

605.838.040.000

50mm

605.838.050.000

65mm

605.838.065.000

Combination Pack

605.838.000.014

•

Combination pack includes one each of 40mm, 50mm and 65mm

Diameter (mm)

Builders Hardware

General Hardware & Tools Drill Bits

Item number

PZ2 25

605.8T10.325.000

PZ2 50

605.8T10.350.000

Power Drill Bit

PH2 152

605.8T10.205.000

Philips Head Drill Bits

PH1 25

605.8T10.125.000

PH2 25

605.8T10.225.000

PH1 50

605.8T10.150.000

PH2 50

605.8T10.250.000

Pozidrive Drill Bit

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.25

Diameter (mm)

General Hardware & Tools Drill Bits

Item number

Snappy Countersunk Drill Bit

1/8

605.8T60.000.018

Jobber Drill Bit

5/64

605.8T50.343.564

7/64

605.8T50.343.764

1/18

605.8T50.343.180

Tungsten Drill Bits, 57mm

.157.010

.157.105

.257.035

.157.008

.157.005

5.26

605.8T40.157.105

Left-hand 5

605.8T40.157.005

Right-hand 8

605.8T40.157.008

Left-hand 8

605.8T40.157.108

Right-hand 10

605.8T40.257.010

Left-hand 10

605.8T40.157.010

Right-hand 35

605.8T40.257.035

.157.108

Made of tungsten carbide Magnetic Drill Bit Holder 605.8T10.000.000

Right-hand 5

Diameter (mm)

Builders Hardware

General Hardware & Tools Drill Twists

Item number

Twist Drill Bit, Imperial

1/8

605.8T50.343.018

Drill Twists, Metric

2.5

605.8T50.343.025

605.8T50.343.030

3.5

605.8T50.343.035

605.8T50.343.040

605.8T50.343.050

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.27

General Hardware & Tools Saw Blades

Makita Jigsaw Blades, 5 pack

Jigsaw Blades

Reversable Planer Saw Blade

5.28

Teeth

Style

Cut direction

Item number

2.9

B10

Upward Cut

605.8T41.010.000

2.8

B11

Upward Cut

605.8T41.011.000

4.2

B12

Upward Cut

605.8T41.012.000

2.1

B19

Downward Cut

605.8T41.019.000

4.0

T144D

Upward Cut

605.8T40.144.000

605.8T35.000.050

Builders Hardware

General Hardware & Tools General Hardware

Item number

Handy Files

605.8T70.000.000

Stan the Stand

Stand 605.8T90.000.000 Extension Kit 605.8T90.005.000 PVC Covers 605.8T90.010.000

Storage Boxes

Exacta Pack - Large 605.8T90.015.000 Multi 10 Pack - Small 605.8T90.020.000

Made of plastic

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.29

General Hardware & Tools Liquid Laminate

• • •

Liquid Laminate, 15ml

5.30

6 bottles in each pack Available in a variety of colours Hide small damage done to furniture

Colour

Item number

White

605.8L50.301.001

Black

605.8L50.301.002

Marl Beige

605.8L50.301.003

Antique Bhite

605.8L50.301.004

Parchment

605.8L50.301.005

Charcoal

605.8L50.301.006

Folk / Oyster Grey

605.8L50.301.007

Alabaster

605.8L50.301.008

Classic Beige

605.8L50.301.009

Cappucino

605.8L50.301.010

Mushroom Linea

605.8L50.301.011

Oyster Linea

605.8L50.301.012

Paperbark

605.8L50.301.013

Select Beech

605.8L50.301.028

Young Beech

605.8L50.301.036

General Hardware & Tools Repair Crayons

• •

General Hardware & Tools

•

12 crayons in each pack Available in a variety of colours Hide small damage done to furniture

Repair Crayons

Download supporting documentation from the Titus Tekform website titustekform.com.au

Colour

Item number

White

605.8L50.300.001

Black

605.8L50.300.002

Marl Beige

605.8L50.300.003

Antique White

605.8L50.300.004

Parchment

605.8L50.300.005

Gunmetal

605.8L50.300.006

Folk/Oyster Grey

605.8L50.300.007

Ironstone

605.8L50.300.008

Baltic Pine

605.8L50.300.010

Birch

605.8L50.300.012

Cherry

605.8L50.300.014

Dark Teak

605.8L50.300.016

Dark Walnut

605.8L50.300.018

Graceful Oak

605.8L50.300.020

Jarrah

605.8L50.300.022

Light Teak

605.8L50.300.024

Red Cherry

605.8L50.300.026

Select Beech

605.8L50.300.028

Tasmanian Oak

605.8L50.300.030

Walnut

605.8L50.300.032

Wild Birch

605.8L50.300.034

Young Beech

605.8L50.300.036

Various Colours

605.8L50.300.000

5.31

General Hardware & Tools Filler • • •

Timbermate Filler

5.32

Water-based 4-in-1 Woodputty, Grainfiller, Edgefiller and Crackfiller Non-flammable, non-toxic and can be used to the last gram

Size (kg)

Colour

Item number

Ebony

605.8L50.302.202

Hardwood

605.8L50.302.203

Hardwood

605.8L50.302.803

Oak

605.8L50.302.230

Pine

605.8L50.302.210

Pine

605.8L50.302.810

Teak

605.8L50.302.224

Walnut

605.8L50.302.232

White

605.8L50.302.201

Cabinet Hardware

General Hardware & Tools Safety Materials

Item number

Nuisance Dust Mask

605.8T90.035.000

Disposable Respirator with Valve, 12 pack

605.8T90.040.000

Pro-plug Disposable Ear Plugs, Uncorded, 200 Pair

605.8T90.045.000

Download supporting documentation from the Titus Tekform website titustekform.com.au

5.33

x.1

Download supporting documentation from the Titus Tekform website titustekform.com.au

Edgebanding

x.2

Edgebanding Product Guide

Edgebanding Page

6.2

OptiBoard Edging Colour Options

6.3

Opti Laser Edgeband

6.4

Opti ABS Edgeband

6.5

Edgeband Colour Options

6.6

ABS Edgeband

6.7

PVC Edgeband

6.8

Melamine Edgeband

6.9

OptiBoard Edging Information •

•

For Trade and Commercial use Colour-matched to Stefano Orlati OptiGlaz and OptiMatt board range > see page 12.3 Unglued edging perfect to use with our range of Keliberit adhesives

OptiGlaz Colour Options

Anthracite Pearl

Champagne Pearl

Cream

Great White

Ice White

Ivory

Ivory Pearl

Silver Pearl

Super Black

OptiMatt Colour Options

Anthracite

Black

Cashmere

Dove Tale

Ivory

White

Download supporting documentation from the Titus Tekform website titustekform.com.au

6.3

Edgebanding

•

Edgebanding Opti Laser Edgeband â&#x20AC;˘

For complementary doors and panels > see page

100 metres per roll

6.4

Finish

Thickness (mm)

Opti Laser Edgeband

Colour

Width (mm)

12.3

Item number

White

Matt

609.8Q04.322.300

Black

Matt

609.8Q04.322.301

Ivory

Matt

609.8Q04.322.302

Cashmere

Matt

609.8Q04.322.303

Dove Tale

Matt

609.8Q04.322.304

Anthracite

Matt

609.8Q04.322.305

Ice White

Gloss

609.8Q05.322.300

Super Black

Gloss

609.8Q05.322.301

Ivory

Gloss

609.8Q05.322.302

Cream

Gloss

609.8Q05.322.303

Great White

Gloss

609.8Q05.322.304

Silver Pearl

Gloss

609.8Q05.322.305

Champagne Pearl

Gloss

609.8Q05.322.306

Ivory Pearl

Gloss

609.8Q05.322.307

Anthracite Pearl

Gloss

609.8Q05.322.308

Finish

Thickness (mm)

Opti ABS Edgeband

Colour

Width (mm)

Edgebanding

Edgebanding Opti ABS Edgeband

Item number

White

Matt

609.8A04.322.100

Black

Matt

609.8A04.322.101

Ivory

Matt

609.8A04.322.102

Cashmere

Matt

609.8A04.322.103

Dove Tale

Matt

609.8A04.322.104

Anthracite

Matt

609.8A04.322.105

Ice White

Gloss

609.8A05.322.100

Super Black

Gloss

609.8A05.322.101

Ivory

Gloss

609.8A05.322.102

Cream

Gloss

609.8A05.322.103

Great White

Gloss

609.8A05.322.104

Silver Pearl

Gloss

609.8A05.322.105

Champagne Pearl

Gloss

609.8A05.322.106

Ivory Pearl

Gloss

609.8A05.322.107

Anthracite Pearl

Gloss

609.8A05.322.108

100 metres per roll

Download supporting documentation from the Titus Tekform website titustekform.com.au

6.5

Edgebanding Information

Edgebanding Colour Options

6.6

New Antique White

Oyster Grey

Tekform White

Black

Edgebanding ABS Edgeband • • • •

Thickness (mm)

ABS Edgeband

Width (mm)

Edgebanding

•

For Trade and Commercial use Available in ABS, Melamine and PVC Option of pre-glued or unglued Unglued edging perfect to use with our range of Keliberit adhesives Textured, satin and stipple finish options

Glue

Item number

Unglued

609.8A03.321.100

Unglued

609.8A02.321.100

Matt

Unglued

609.8A53.521.100

Matt

Unglued

609.8A62.521.100

Colour

Finish

New Antique White

Texture

Black

Texture

New Antique White Oyster Grey

100 metres per roll

Download supporting documentation from the Titus Tekform website titustekform.com.au

6.7

Edgebanding PVC Edgeband • • • •

100 metres per roll

6.8

Finish

Thickness (mm)

PVC Edgeband

Colour

Width (mm)

•

For Trade and Commercial use Available in ABS, Melamine and PVC Option of pre-glued or unglued Unglued edging perfect to use with our range of Kleiberit adhesives Textured, satin and stipple finish options

Glue

Item number

Black

Texture

Unglued

609.8P02.322.200

Black

Texture

Unglued

609.8P02.329.200

Black

Texture

Unglued

609.8P02.338.200

White

Texture

0.4

Unglued

609.8P01.321.040

White

Texture

Unglued

609.8P01.321.100

White

Texture

Pre-glued 609.8P01.321.101

White

Texture

Unglued

609.8P01.322.200

White

Texture

Unglued

609.8P01.329.200

White

Texture

Unglued

609.8P01.138.200

Edgebanding Melamine Edgeband • • • •

Finish

Thickness (mm)

Melamine Edgeband

Colour

Width (mm)

Edgebanding

•

Glue

White

Texture

0.32

Pre-glued 609.8M01.221.031

White

Texture

0.32

Unglued

Item number

609.8M01.221.030

250 metre roll, unglued

150 metre roll, pre-glued

Download supporting documentation from the Titus Tekform website titustekform.com.au

6.9

x.1

Abrasives & Adhesives

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.2

Abrasives and Adhesives Product Guide

Abrasives Page

7.2

Abrasive Rolls

7.4

Abrasive Belts

7.5

Abrasive Sheets

7.5

Abrasive Discs

7.6

Abrasive Sponges

7.7

Adhesives 7.8

Hotmelt Glue Primers & Cleaning Agents

7.11

PVA Adhesives

7.12

Lacquer & Contact Adhesives

7.14

Cleaners

7.15

PUR Adhesives

7.16

Construction Adhesives & Gap Filler

7.17

Silicone Sealants

7.18

Aerosol & Epoxy Adhesives

7.20

Adhesive Tape & Accessories

7.21

7.3

Abrasives Abrasive Rolls for Sanding •

• • •

Abrasive Roll for Sanding

7.4

Antistatic and semi-open structure reduces the risk of loading Stable and ﬂexible e-weight paper backing Suitable for sanding all types of veneer and solid wood Ideal for sanding different materials without changing the belt

Grit

Length (m)

Width (mm)

Item number

115

601.8C15.060

115

601.8C15.080

100

115

601.8C15.100

120

115

601.8C15.120

150

115

601.8C15.150

180

115

601.8C15.180

240

115

601.8C15.240

320

115

601.8C15.320

Abrasives & Adhesives

Abrasives Abrasive Belts and Sheets for Sanding

Abrasive Belts for Sanding

Abrasive Sheets for Sanding

Grit

Width (mm)

Length (mm)

Item number

100

610

601.8C61.040

100

610

601.8C61.060

100

610

601.8C61.080

100

610

601.8C61.100

120

100

610

601.8C61.120

150

100

610

601.8C61.150

180

100

610

601.8C61.180

240

100

610

601.8C61.240

280

230

601.8C62.060

280

230

601.8C62.080

120

280

230

601.8C62.120

150

280

230

601.8C62.150

180

280

230

601.8C62.180

240

280

230

601.8C62.240

320

280

230

601.8C62.320

400

280

230

601.8C62.400

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.5

Abrasives Abrasive Velcro Discs • • •

Abrasive Velcro Disc for Sanding

7.6

Good stock removal rate even at low sanding pressure Economical sanding of all types of wood Suitable for sanding all types of veneer and solid wood

Grit

Diameter (mm)

Holes

Item number

150

601.8C18.080

120

150

601.8C18.120

180

150

601.8C18.180

240

150

601.8C18.240

320

150

601.8C18.320

400

150

601.8C18.400

150

601.8C19.080

100

150

601.8C19.100

120

150

601.8C19.120

150

601.8C19.150

180

150

601.8C19.180

240

150

601.8C19.240

320

150

601.8C19.320

400

150

601.8C19.400

•

• • • •

Abrasive Sponge for Sanding, Double-sided

Grit

Length (mm)

Width (mm)

Thickness (mm)

Item number

180

123

601.8C16.060

•

Abrasive Sponge for Sanding, Single-sided

Fine sanding of wood in preparation for staining and lacquering Intermediate sanding of primers and lacquers Fine cleaning of oxide layers from metallic surfaces For highly profiled and contoured workpieces Can be used wet or dry

High degree of flexibility and adaptability

180

115

140

601.8C16.180

280

115

140

601.8C16.280

•

Medium degree of flexibility

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.7

Abrasives & Adhesives

Abrasives Abrasive Sponges

Adhesives Hotmelt Glue •

•

Hotmelt Glue 707.7 PUR

Weight

Item number

Natural

•

240g

607.8B01.707 >

720

• •

•

Hotmelt Glue 753.5

• • •

Hotmelt Glue 773.0

• • •

• • • • • •

7.8

520

601.8B01.773 >

020

Bonding of polyester edges, CPL and melamine resin edges, PVC and ABS edges (primed), uncompressed resin-impregnated paper edges and veneer and plastic edges on machining centres Excellent dosing and high strength Free of fillers Good melting properties

20kg •

601.8B01.753 >

To use with high speed edgebanders Suitable for all edging materials Works well with paper, veneer and melamine Very high green strength

20kg •

Hotmelt Glue 773.3

Reactive hotmelt with invisible glue line To use with high quality edgebanding on HOLZ-HER edgebanding machines with cartridge systems Works well with solid wood edges, HPL edges in strips, PVC edges, extruded/calandered, veneer edges, Duroplastic and thermoplastic edges Excellent green strength

20kg •

Clear

Hotmelt adhesives react with moisture from the material to be bonded For furniture production, automotive industry and paper processing A wide variety of assembly bonds from proﬁle wrapping to edgebanding Use suitable machines, lines and equipment

•

601.8B01.773 >

320

Suited for application on CNC and regular edgebanders Excellent melting properties Outstanding high green strength No stringing Good adhesion to HPL Transparent, invisible glue line Excellent adhesion to PVC, veneer, ABS, PP and solid wood

Hotmelt Glue 773.7

Item number

20kg

601.8B01.773 >

725

•

• • •

Hotmelt Glue 774.4

601.8B01.774 >

25kg

601.8B01.774 >

• • • •

Hotmelt Glue 779.6

601.8B01.779 >

25kg

601.8B01.779 >

•

• •

Download supporting documentation from the Titus Tekform website titustekform.com.au

125

625 725

To use with slow operating edgebanders Good flowing property from storage bin to pressing cylinder fast re-melting Good water and aging resistance

25kg •

025

To use with common commercial edgebanders Universal use Suitable for pre-cooling of edges Good ongoing resistance Good melting properties

25kg

•

Hotmelt Glue 782.1

To use with common commercial edgebanders Excellent dosing Good melting properties High green strength

25kg

•

White

Weight

Natural

Abrasives & Adhesives

Adhesives Hotmelt Glue

601.8B01.782 >

125

To use with slow operating edgebanders Can be used as cartridge or granules Good water and aging resistance

7.9

Adhesives Hotmelt Glues

Supramelt Hotmelt Glue 782.5

Weight

Item number

20kg

601.8B01.782

• • •

Hotmelt Glue 788 Series

788.0 25kg

601.8B01.788

225

788.7 25kg

601.8B01.788

025

788.7 25kg

601.8B01.788

788.3 for hand-held machine 25kg

601.8B01.788

15kg

601.8B01.782

15kg

601.8B01.782

•

725 325

615 715 015

Bonding of epoxy resin edges, pre-primed ABS edges, solid wood edges, polyester edges, preprimed PVC edges and veneer edges

11kg

•

125

Excellent heat stability and bonding strength Designed especially for edgebanding 601.8B01.782

•

7.10

15.3kg

•

Supramelt Glue Slugs 782.5

To use with slow operating edgebanders Can be used as cartridge or granules Good water and aging resistance

601.8B01.788

•

Supramelt Glue Slugs 782

525

788.0 25kg

•

Black

•

Clear

•

White

•

Natural

•

601.8B01.782

To use with slow operating edgebanders Can be used as cartridge or granules Good water and aging resistance

511

Abrasives & Adhesives

Adhesives Primers and Cleaning Agents

Primer 838

Size

Item number

4.5kg

601.8A60.838.004

•

Cleaning Agent 761.7

20kg •

•

Cleaning Agent EVA to PUR 761.0

•

601.8A60.761.720

Hotmelt material to clean melting units, hoses and application units using reactive PUR hotmelt adhesives Prevents clogging of feeding systems as well as reactive incrustation on application units Renders nozzles clog free

200g •

Download supporting documentation from the Titus Tekform website titustekform.com.au

Primer is an adhesive agent between the adhesive and substrate. It improves the bond on surfaces which are typically difficult to bond to The primer application takes place in a thin yet even coat on the entire surface Fields of application: for all difficult surfaces e.g. plastic profiles for wrapping or also metals like aluminium, etc.

601.8A60.707.720

Hotmelt material to clean up hose lines and applicators using reactive polyurethane hotmelt adhesives Prevents clogging of feeding systems as well as reactive incrustation on application units Renders nozzles clog free

7.11

Adhesives PVA Adhesives •

•

• •

Sealants cure through cross linking of the polymers with moisture in the air Used for sealing construction joints, glazing, tile work and connecting different materials Very elastic with high mechanical strength Use in the construction, automotive and caravan industries

Weight / Capacity

Crosslinking PVA

303.0 0.5kg

601.8B05.303.000

303.0 5kg

601.8B05.303.005

303.0 10kg

601.8B05.303.010

303.0 28kg

601.8B05.303.028

303.0 220kg

601.8B05.303.220

347.3 28kg

601.8B05.347.328

•

Turbo Hardener 303.5

601.8A60.303.000

Typically used to bond end grain to melamine face in the manufacture of cabinets, cupboards and drawers

10kg •

7.12

High quality, general purpose crosslinking PVA adhesive

0.5kg •

PVA 305

Item number

601.8B05.305.010

High quality, general purpose woodworking PVA adhesive

•

• •

MDF and Timber PVA Adhesive 301

Size

Item number

601.8B25.301.005

20L

601.8B25.301.020

•

PVA Woodworking Adhesive 302

601.8B05.302.005

20L

601.8B05.302.020

•

Melamine Adhesive 303

601.8B20.303.005

20L

601.8B20.303.020

A fast setting PVA with good moisture resistance which attains a high bond strength after a short setting time

5L •

Download supporting documentation from the Titus Tekform website titustekform.com.au

High quality, general purpose woodworking PVA adhesive

•

Sandable PVA 304

A yellow, fast setting PVA used for bonding a wide range of timber & boards (especially MDF)

601.8B05.304.005

A fast setting PVA with good moisture resistance which attains a high bond strength after a short setting time

7.13

Abrasives & Adhesives

Adhesives PVA Adhesives

Super Lacquer 308.0

Item number

0.5kg

601.8A60.308.500

4.5kg

601.8A60.308.450

•

Brushable Contact Adhesive 205

7.14

For bonding wood and wood based materials to lacquered and plastic coated surfaces Ideal for use in furniture manufacturing or D.I.Y projects where wood based materials are to be bonded to pre-lacquered surfaces, plastic laminates and melamine coatings

200L

601.8A12.200

200L

601.8A10.200

20L

601.8A12.020

20L

601.8A10.020

•

Red

Weight

•

Premium Spray Contact Adhesive

Clear

Adhesives Lacquer and Contact Adhesives

000 000 000 000

A high heat resistant, high solids adhesive used to bond decorative laminates, auto upholstery and many other materials

20L

601.8B10.205

020

Abrasives & Adhesives

Adhesives Cleaners

ABS Edge Cleaner Plus

Size

Item number

200L

601.8A60.006.200

20L

601.8A60.007.020

•

Contact Cleaner 101

20L •

•

Download supporting documentation from the Titus Tekform website titustekform.com.au

Formulated to clean off hotmelt and solvent based adhesives from ABS edging without attacking the ABS edging

601.8A60.101.020

Formulated for the clean up of metal tools and spray guns used in the application of contact adhesives Can be used for cleaning contact adhesive spills and over-spray on laminates Not suitable for ABS edging or polystyrene surfaces

7.15

Adhesives PUR Adhesive •

•

PUR Adhesive 501.0

PUR adhesives cure through cross linking with moisture from the air and the substrate Extremely strong bonds that are temperature and water resistant Use for especially difﬁcult to bond materials like stone and plastics Add a hardener (catalyst) for desired bonding properties

Weight

Item number

0.5kg

601.8B10.501.005

•

• • • • •

PUR Adhesive 501.6

0.5kg •

•

• • • • •

7.16

Adhesive for water resistant bonding according to DIN/EN 204 standards Humidity curing singlecomponent reaction adhesive based on polyurethane Handy bottle with patented dispensing lid Self cleaning Easy to dispense Precise adhesive application Open time approx. 25 min Curing time 2-3 hours

601.8B10.501.605

Adhesive for water resistant bonding according to DIN/EN 204 standards Humidity curing singlecomponent reaction adhesive based on polyurethane The handy bottle has a patented dispensing lid Self cleaning Easy to dispense Precise adhesive application Open time approx. 70 min Curing time 1 day

Abrasives & Adhesives

Adhesives Construction Adhesives & Gap Filler

Construction Adhesive 569

Size

Item number

325g

601.8B30.569.325

•

• • •

Construction Adhesive

300g •

•

• •

Gap Filler

• • •

601.8A40.047.064

Multi-purpose construction adhesive ideal for bonding most common construction materials Repositionable for up to 20 minutes after application Effective when used on uneven floors Fast drying

450g •

Download supporting documentation from the Titus Tekform website titustekform.com.au

Moisture curing one component PUR adhesive High water resistance D4 High temperature resistance Extreme high bond strength

601.8A40.045.001

Acrylic based gap filler ideal for filling gaps Easy to apply Interior/exterior Water clean up

7.17

Adhesives Silicone Sealants • •

740 Bath & Kitchen Silicone Sealant

Contains fungicide that resists mould and mildew Permanently flexible: +/-25% joint movement capability

Finish

Weight

Item number

Clear

300g

601.8A40.740.000

White

300g

601.8A40.740.001

•

• •

770 Sanitary Silicone Sealant

Clear

300g

601.8A40.770.000

White

300g

601.8A40.770.001

• •

•

• •

7.18

Specifically designed for use in sealing applications involving non-porous surfaces commonly found in bathrooms, kitchens and laundries Acetic cure Seals water tight

Specifically designed for use in wet areas Primerless adhesion to the widest range of surfaces Neutral cure - will not corrode metal or concrete Strong adhesion Suitable for contact with aluminium shower screens

Adhesives Silicone Sealants •

UV and weather resistant Neutral cure - will not corrode metal or concrete

Abrasives & Adhesives

•

300 Glazing & Industrial Silicone Sealant

Finish

Weight

Item number

Clear

300g

601.8A40.300.000

•

• • • •

790 Mirror & Metal Silicone Sealant

Premium grade silicone sealant specifically formulated for use in glazing and industrial fabrication Fast skinning Low sag Low shrinkage Low VOC

Clear •

•

Download supporting documentation from the Titus Tekform website titustekform.com.au

300g

601.8A40.790.000

Specially formulated for a range of sealing uses Ideal for bonding standard silvered mirrors to walls and other general purpose metal bonding and sealing Permanently flexible: +/- 25% joint movement capability Interior/exterior application

7.19

Adhesives Aerosol and Epoxy Adhesives

Tensorgrip L17 Aerosol Adhesive

Size

Item number

500ml

601.8B40.017.482

•

Super Strength Epoxy Adhesive

30ml •

Mitre Mate Bonding Kit

•

601.8B40.020.003

Adhesives based on resins and hardeners reacting to create an extremely stable thermosetting plastic after cross linking. The strength values of the bond can be increased through targeted addition of heat during curing

50g adhesive 200ml activator •

7.20

CLASS-1 FIRE RATED web spray adhesive Suitable for bonding metal sheeting, standard laminates, FRL, FRP/GRP and plasterboard

601.8B40.024.000

Quick, no-mess method for bonding mitre joints in many materials Bonds MDF, wood, most plastics, rubber, leather, cork and most metals Two part bonding kit to replace traditional fittings such as screws and nails

Abrasives & Adhesives

Adhesives Adhesive Tape & Accessories

Length (m)

Mask & Peel Protective Film

500ml Plastic Glue Bottle and Cap

Width

Item number

100m

601.8A80.002.100

Glue bottle only

601.8A80.052.000

Glue bottle cap only

601.8A80.056.000

Tap for Plastic Drum

Masking Tape

Packing Tape

601.8A80.060.000

18mm

601.8A81.018.050

24mm

601.8A81.024.050

36mm

601.8A81.036.050

48mm

601.8A81.048.050

48mm

601.8A80.048.050

Download supporting documentation from the Titus Tekform website titustekform.com.au

7.21

x.1

Cabinet Handles

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.2

Cabinet Handles Product Guide

Stefano Orlati Handles Page

8.2

Information

8.3

Bow Handles

8.4

Profile Handles

8.15

Provincial Handles

8.23

Recessed Handles

8.26

Square Handles

8.27

Stainless Steel Handles

8.43

Knobs

8.45

Cabinet Handles

Stefano Orlati Handles Information

Colour Finish Guide

Antique Bronze

Matt Chrome

ABS

Aluminium Brushed Satin

Matt White

Antique Copper

Pewter

Antique Iron

Polished Brass

BLKN

Black Nickel

PCO

Polished Copper*

Brushed Nickel

Silver

BSAT

Brushed Satin Antique Tin

Satin Brass

BSBN

Brushed Satin Black Nickel

Satin Chrome

Chrome

Satin Nickel

Clear Glass

Stainless Steel

Foggy Silver

Tungsten

Gold

Titanium Grey

Matt Black

White

MBN

Matt Brushed Nickel

WHC

White Crackled Finish

Guide to Handle Dimensions

Length: Overall length of the handle (mm)

Length

Width

Centre: Screw hole to screw hole (mm) Height: Height/Projection of handle (mm)

Height

Width: Width of handle face (mm)

Centre

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.3

112

114

122

8.4

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

128 170

SO-112-128 >

128 170

SO-112-128 >

160 185

SO-114-160 >

160 185

SO-114-160 >

160 180

SO-122-160 >

160 180

SO-122-160 >

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

311

128 165

SO-311-128 >

325

128 168

SO-325-128 >

PCO*

160 200

SO-325-160 >

PCO*

224 264

SO-325-224 >

PCO*

320 360

SO-325-320 >

PCO*

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.5

410

688

8.6

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

112

608.8J20.096.004

112

608.8J20.096.013

128 144

608.8J20.128.013

112

608.8J20.096.003

128 144

608.8J20.128.003

224 288

608.8J20.224.003

112

608.8J20.096.007

128 144

608.8J20.128.007

224 288

608.8J20.224.007

112

608.8J20.096.008

128 144

608.8J20.128.008

224 288

608.8J20.224.008

112

608.8J20.096.012

BLKN

128 144

608.8J20.128.012

BLKN

224 288

608.8J20.224.012

BLKN

SO-688-96 >

CH/SN

124

782

1037

2060

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

115

608.8F21.096.007

128 148

608.8F21.128.007

115

608.8F21.096.008

128 148

608.8F21.128.008

128 158

SO-1037-128 >

128 158

SO-1037-128 >

128 158

SO-1037-128 >

128 158

SO-1037-128 >

128 158

SO-1037-128 >

115

SO-2060-96 >

128 154

SO-2060-128 >

115

SO-2060-96 >

128 154

SO-2060-128 >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.7

2188

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

121

SO-2188-96 >

121

SO-2188-96 >

3062

160 222

SO-3062-160 >

3130

128 147

SO-3130-128 >

192 212

SO-3130-192 >

256 275

SO-3130-256 >

416 430

SO-3130-416 >

128 147

SO-3130-128 >

192 212

SO-3130-192 >

256 275

SO-3130-256 >

416 430

SO-3130-416 >

128 147

SO-3130-128 >

192 212

SO-3130-192 >

256 275

SO-3130-256 >

416 430

SO-3130-416 >

8.8

3319

3380

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

140

SO-3319-96 >

192 250

SO-3319-192 >

140

SO-3319-96 >

192 250

SO-3319-192 >

128 151

SO-3380-128 >

160 189

SO-3380-160 >

224 260

SO-3380-224 >

320 358

SO-3380-320 >

128 151

SO-3380-128 >

160 189

SO-3380-160 >

224 260

SO-3380-224 >

320 358

SO-3380-320 >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.9

6329

7025

7039

8.10

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

128 167

SO-6329-128 >

192 231

SO-6329-192 >

128 167

SO-6329-128 >

192 231

SO-6329-192 >

256 295

SO-6329-256>

320 359

SO-6329-320>

128 167

SO-6329-128 >

MBN

192 231

SO-6329-192 >

MBN

256 295

SO-6329-256 >

MBN

320 359

SO-6329-320 >

MBN

128 138

SO-7025-128 >

160 170

SO-7025-160 >

224 234

SO-7025-224 >

320 330

SO-7025-320 >

128 138

SO-7025-128 >

160 170

SO-7025-160 >

224 234

SO-7025-224 >

320 330

SO-7025-320 >

128 160

608.8H20.128.003

160 190

608.8H20.160.003

256 286

608.8H20.256.003

320 350

608.8H20.320.003

7090

7127

7165

7179

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

138

608.8F17.096.003

128 168

608.8F17.128.003

160 200

608.8F17.160.003

256 296

608.8F17.256.003

320 360

608.8F17.320.003

128 148

608.8F16.128.003

160 180

608.8F16.160.003

256 276

608.8F16.256.003

320 344

608.8F16.320.003

136

608.8H18.096.003

128 168

608.8H18.128.003

160 200

608.8H18.160.003

256 296

608.8H18.256.003

124

608.8F18.096.003

128 157

608.8F18.128.003

160 189

608.8F18.160.003

256 286

608.8F18.256.003

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.11

7229

7232

7235

7236

9238

8.12

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

128 170

608.8H21.128.003

160 202

608.8H21.160.003

320 362

608.8H21.320.003

128 165

608.8H19.128.003

160 197

608.8H19.160.003

320 344

608.8H19.320.003

128 163

608.8O19.128.003

160 204

608.8O19.160.003

320 372

608.8O19.320.003

128 214

608.8O20.128.003

160 268

608.8O20.160.003

320 404

608.8O20.320.003

SO-9238-96 >

118

9718

9908

9910

211XL

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Bow Handles

Stefano Orlati Handles Bow Handles

141

SO-9718-96 >

128 200

SO-9718-128 >

141

SO-9718-96 >

128 200

SO-9718-128 >

105

SO-9908-96 >

128 147

SO-9908-128 >

105

SO-9908-96 >

128 147

SO-9908-128 >

105

SO-9908-96 >

128 147

SO-9908-128 >

114

SO-9910-96 >

128 150

SO-9910-128 >

114

SO-9910-96 >

128 150

SO-9910-128 >

224 270

SO-211XL-224 >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.13

ARC

TSB

8.14

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Bow Handles

128 153

SO-ARC-128 >

160 190

SO-ARC-160 >

224 263

SO-ARC-224 >

288 336

SO-ARC-288 >

128 148

SO-C-128 >

160 180

SO-C-160 >

192 212

SO-C-192 >

128 148

SO-C-128 >

160 180

SO-C-160 >

192 212

SO-C-192 >

128 148

SO-C-128 >

160 180

SO-C-160 >

192 212

SO-C-192 >

111

SO-TSB-96 >

111

SO-TSB-96 >

BLKN

128 150

SO-TSB-128 >

BLKN

111

SO-TSB-96 >

128 150

SO-TSB-128 >

111

SO-TSB-96 >

128 150

SO-TSB-128 >

111

SO-TSB-96 >

128 150

SO-TSB-128 >

111

SO-TSB-96 >

128 150

SO-TSB-128 >

AK0891

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Profile Handles

Stefano Orlati Handles Profile Handles

3000

SO-AK0891 >

3000

SO-AK0891B >

3000

SO-AK0894 >

Side Profile

AK0891B

Side Profile

AK0894

Side Profile

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.15

Stefano Orlati Handles Profile Handles

CAPRI-J

•

Item number

Finish

Length (mm)

•

Depth (mm)

•

Create handleless openings for doors and top drawers Horizontal mounting Available in six on-trend finishes

Height (mm)

•

3600

57.1

608.8U10.360.001

3600

57.1

608.8U10.360.007

3600

57.1

608.8U10.360.010

3600

57.1

608.8U10.360.011

3600

57.1

608.8U10.360.013

3000

57.1

608.8U10.360.015

End caps and brackets ordered separately

Quoted dimensions consider that the CAPRI profile will have a 1mm overhang. Increase measurements by 1mm for applications where the CAPRI profile should be flush with the cabinet sides.

8.16

Stefano Orlati Handles Profile Handles •

Create handleless openings for drawers Horizontal mounting

CAPRI-C

Item number

Finish

Depth (mm)

Height (mm)

Length (mm)

Profile Handles

•

3600

73.5

608.8U08.360.001

3600

73.5

608.8U08.360.007

3600

73.5

608.8U08.360.010

3600

73.5

608.8U08.360.011

3600

73.5

608.8U08.360.013

3000

73.5

608.8U08.360.015

•

Available in six on-trend finishes End caps and brackets ordered separately

Quoted dimensions consider that the CAPRI profile will have a 1mm overhang. Increase measurements by 1mm for applications where the CAPRI profile should be flush with the cabinet sides.

CAPRI-C LED

3600

608.8U09.360.001

3600

608.8U09.360.007

3600

608.8U09.360.010

3600

608.8U09.360.011

3600

608.8U09.360.013

3000

608.8U09.360.015

•

Integrated LED profile & strip

Quoted dimensions consider that the CAPRI profile will have a 1mm overhang. Increase measurements by 1mm for applications where the CAPRI profile should be flush with the cabinet sides.

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.17

Stefano Orlati Handles Profile Handles

CAPRI-Y

Side Profile

608.8U16.360.001

2400

608.8U16.360.007

2400

608.8U16.360.010

2400

608.8U16.360.011

2400

608.8U16.360.013

2400

608.8U16.360.015

Create handleless openings for tower cabinets Vertical mounting between cabinets

3600

34.3

608.8U14.360.001

3600

34.3

608.8U14.360.007

3600

34.3

608.8U14.360.010

3600

34.3

608.8U14.360.011

3600

34.3

608.8U14.360.013

3000

34.3

608.8U14.360.015

•

Create handleless openings for wall cabinets Horizontal mounting

Note: Can be used on 16mm and 18mm board. Dimensions are still 9mm from top to top of cutout

8.18

Finish

Depth (mm)

•

Side Profile

Item number

2400

•

CAPRI-R

Available in six on-trend finishes

Height (mm)

Length (mm)

•

CAPRI-N

Side Profile

•

Item number

Finish

Depth (mm)

Height (mm)

Handing

Length (mm)

Profile Handles

Stefano Orlati Handles Profile Handles

3600

10.5

608.8U12.360.001

3600

10.5

608.8U12.360.007

3600

10.5

608.8U12.360.010

3600

10.5

608.8U12.360.011

3600

10.5

608.8U12.360.013

3000

10.5

608.8U12.360.015

Shelf edge protection Horizontal mounting Available in six on-trend finishes

Note: N Profile only suits 16mm board

CAPRI Profile Mounting Bracket

Universal •

•

608.8U19.070.001

Universal mounting bracket for CAPRI Profile range Simple 3 step mounting process

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.19

CAPRI-J End Caps

CAPRI-C End Caps

8.20

Item number

Left

608.8U17.056.001

Right

608.8U17.057.001

Left

608.8U17.056.007

Right

608.8U17.057.007

Left

608.8U17.056.010

Right

608.8U17.057.010

Left

608.8U17.056.011

Right

608.8U17.057.011

Left

608.8U17.056.013

Right

608.8U17.057.013

Left

608.8U17.056.015

Right

608.8U17.057.015

Universal

608.8U17.073.001

Universal

608.8U17.073.007

Universal

608.8U17.073.010

Universal

608.8U17.073.011

Universal

608.8U17.073.013

Universal

608.8U17.073.015

Finish

Handing

Stefano Orlati Handles Profile Handles

7130

Side Profile

Finish

Width (mm)

Height (mm)

608.8C17.020.010

100

608.8C17.080.010

160

180

608.8C17.160.010

260

280

608.8C17.260.010

608.8C17.020.003

100

608.8C17.080.003

160

180

608.8C17.160.003

260

280

608.8C17.260.003

SO-R156-64 >

ABS

160

190

SO-R156-160 >

ABS

SO-R156-64 >

160

190

SO-R156-160 >

R156

41mm 4mm

Item number

25mm

35mm

Length (mm)

Centre (mm)

Profile Handles

Stefano Orlati Handles Profile Handles

•

Mounts on top of panel edge

8mm

17mm

2mm

Side Profile

PESARO PULL

200

SO-PP-200 >

ABS

2 screw holes - 40mm from edge 400

SO-PP-400 >

ABS

3 screw holes - 100mm between each hole & edge 600

18mm

10mm

36mm

SO-PP-600 >

ABS

4 screw holes - 120mm between each hole & edge

2mm

1250

SO-PP-1250 >

ABS

1.5mm

Side Profile

Without holes drilled •

Mounts on top of panel edge

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.21

548

8.22

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Profile Handles

128 170

SO-548-128 >

ABS

192 235

SO-548-192 >

ABS

320 362

SO-548-320 >

ABS

544 588

SO-548-544 >

ABS

608 650

SO-548-608 >

ABS

736 775

SO-548-736 >

ABS

128 170

SO-548-128 >

192 235

SO-548-192 >

320 362

SO-548-320 >

544 588

SO-548-544 >

608 650

SO-548-608 >

736 775

SO-548-736 >

1186

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Provincial Handles

Stefano Orlati Handles Provincial Handles

132

SO-1186-96 >

BSAT

160

204

SO-1186-160 >

BSAT

132

SO-1186-96 >

BSBN

160

204

SO-1186-160 >

BSBN

Complimentary knob 1186K page > 8.46

1208

135

SO-1208-96 >

BSAT

135

SO-1208-96 >

BSBN

Complimentary knob 1186K page > 8.46

3440

128

150

SO-3440-128 >

160

182

SO-3440-160 >

224

246

SO-3440-224 >

320

342

SO-3440-320 >

128

150

SO-3440-128 >

160

182

SO-3440-160 >

224

246

SO-3440-224 >

320

342

SO-3440-320 >

128

150

SO-3440-128 >

BSBN

160

182

SO-3440-160 >

BSBN

224

246

SO-3440-224 >

BSBN

320

342

SO-3440-320 >

BSBN

Complimentary knob 3440K page > 8.47

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.23

8391

160 180

Item number

SO-8391-160 >

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Provincial Handles

Complementary knob 3801 page > 8.48 Complementary knob 8393 page > 8.49

8392

128 188

SO-8392-128 >

Complementary knob 3801 page > 8.48 Complementary knob 8393 page > 8.49

8407

SO-8407-64 >

Complementary knob 8741 page > 8.49

8658

132

SO-8658-96 >

132

SO-8658-96 >

132

SO-8658-96 >

Complementary knob 8741 page > 8.49

8.24

C15

128 150

Item number

SO-C15-128 >

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Provincial Handles

Stefano Orlati Handles Provincial Handles

WHC/P

Complementary knobs C10 and C14 page > 8.50

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.25

Item number

1159

SO-1159 >

709

128 138

SO-709-128 >

•

AHS403

Suit minimum 16mm board Recess depth 10mm

SO-AHS403-128 >

ABS

160 172

SO-AHS403-160 >

ABS

128 145

SO-AHS403-128 >

160 172

SO-AHS403-160 >

•

Suit minimum 16mm board Recess depth 14mm ABS in this range is a dark version of the ABS finish

127 170

SO-MH20-127 >

226 330

SO-MH20-226 >

•

8.26

128 145

•

MH20

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Recessed Handles

Suit minimum 18mm board Recess depth 15mm

116

288

298

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

128 159

SO-116-128 >

160 190

SO-116-160 >

128 159

SO-116-128 >

160 190

SO-116-160 >

109

SO-288-96 >

128 141

SO-288-128 >

160 173

SO-288-160 >

224 237

SO-288-224 >

288 301

SO-288-288 >

SO-298-64 >

128 142

SO-298-128 >

256 270

SO-298-256 >

SO-298-64 >

128 142

SO-298-128 >

256 270

SO-298-256 >

SO-298-64 >

128 142

SO-298-128 >

256 270

SO-298-256 >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.27

305

690

8.28

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Handles - Square

Stefano Orlati Handles Square Handles

128 145

SO-305-128 >

160 177

SO-305-160 >

224 241

SO-305-224 >

320 337

SO-305-320 >

128 145

SO-305-128 >

160 177

SO-305-160 >

224 241

SO-305-224 >

320 337

SO-305-320 >

128 145

SO-305-128 >

160 177

SO-305-160 >

224 241

SO-305-224 >

320 337

SO-305-320 >

128 145

SO-305-128 >

160 177

SO-305-160 >

224 241

SO-305-224 >

320 337

SO-305-320 >

SO-690-64 >

800

809

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Handles - Square

Stefano Orlati Handles Square Handles

608.8M24.076.008

106

9.5

608.8M24.096.008

128 138

9.5

608.8M24.128.008

160 170

9.5

608.8M24.160.008

192 202

9.5

608.8M24.192.008

256 266

9.5

608.8M24.256.008

106

9.5

608.8M24.096.007

128 138

9.5

608.8M24.128.007

192 202

9.5

608.8M24.192.007

256 266

9.5

608.8M24.256.007

108

SO-809-96 >

160 178

SO-809-160 >

256 274

SO-809-256 >

108

SO-809-96 >

160 178

SO-809-160 >

256 274

SO-809-256 >

Complementary knob 809 page > 8.45

Side Profile

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.29

1092

Finish

Width (mm)

Height (mm)

Item number

102

SO-1092-96 >

128 134

SO-1092-128 >

160 166

SO-1092-160 >

224 230

SO-1092-224 >

288 294

SO-1092-288 >

320 326

SO-1092-320 >

102

SO-1092-96 >

128 134

SO-1092-128 >

160 166

SO-1092-160 >

224 230

SO-1092-224 >

288 294

SO-1092-288 >

320 326

SO-1092-320 >

102

SO-1092-96 >

128 134

SO-1092-128 >

160 166

SO-1092-160 >

224 230

SO-1092-224 >

288 294

SO-1092-288 >

320 326

SO-1092-320 >

102

SO-1092-96 >

128 134

SO-1092-128 >

160 166

SO-1092-160 >

224 230

SO-1092-224 >

288 294

SO-1092-288 >

320 326

SO-1092-320 >

8.30

Length (mm)

Centre (mm)

Handles - Square

Stefano Orlati Handles Square Handles

1745

3061

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Handles - Square

Stefano Orlati Handles Square Handles

128 137

SO-1745-128 >

192 201

SO-1745-192 >

256 265

SO-1745-256 >

128 137

SO-1745-128 >

192 201

SO-1745-192 >

256 265

SO-1745-256 >

128 158

SO-3061-128 >

192 226

SO-3061-192 >

128 158

SO-3061-128 >

192 226

SO-3061-192 >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.31

3064

8.32

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Handles - Square

Stefano Orlati Handles Square Handles

128 157

SO-3064-128 >

160 192

SO-3064-160 >

128 157

SO-3064-128 >

160 192

SO-3064-160 >

121

SO-3064-96 >

128 157

SO-3064-128 >

160 192

SO-3064-160 >

192 224

SO-3064-192 >

240 273

SO-3064-240 >

320 355

SO-3064-320 >

121

SO-3064-96 >

128 157

SO-3064-128 >

160 192

SO-3064-160 >

192 224

SO-3064-192 >

240 273

SO-3064-240 >

320 355

SO-3064-320 >

3163

3447

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Handles - Square

Stefano Orlati Handles Square Handles

121

608.8J18.096.010

128 161

608.8J18.128.010

160 193

608.8J18.160.010

192 225

608.8J18.192.010

240 273

608.8J18.240.010

121

608.8J18.096.003

128 161

608.8J18.128.003

160 193

608.8J18.160.003

192 225

608.8J18.192.003

240 273

608.8J18.240.003

160 192

608.8O18.160.010

128 158

608.8O18.128.003

160 192

608.8O18.160.003

192 226

608.8O18.192.003

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.33

4062

8.34

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Handles - Square

Stefano Orlati Handles Square Handles

104

SO-4062-96 >

128 136

SO-4062-128 >

160 168

SO-4062-160 >

192 200

SO-4062-192 >

256 264

SO-4062-256 >

320 328

SO-4062-320 >

416 424

SO-4062-416 >

104

SO-4062-96 >

128 136

SO-4062-128 >

160 168

SO-4062-160 >

192 200

SO-4062-192 >

256 264

SO-4062-256 >

320 328

SO-4062-320 >

416 424

SO-4062-416 >

104

SO-4062-96 >

128 136

SO-4062-128 >

160 168

SO-4062-160 >

192 200

SO-4062-192 >

256 264

SO-4062-256 >

320 328

SO-4062-320 >

416 424

SO-4062-416 >

5012

5075

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Handles - Square

Stefano Orlati Handles Square Handles

156

608.8D10.096.003

128 188

608.8D10.128.003

160 220

608.8D10.160.003

256 316

608.8D10.256.003

320 380

608.8D10.320.003

128 142

SO-5075-128 >

MBN

192 206

SO-5075-192 >

MBN

320 334

SO-5075-320 >

MBN

128 142

SO-5075-128 >

192 206

SO-5075-192 >

320 334

SO-5075-320 >

128 142

SO-5075-128 >

192 206

SO-5075-192 >

320 334

SO-5075-320 >

128 142

SO-5075-128 >

192 206

SO-5075-192 >

320 334

SO-5075-320 >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.35

5076

6330

8.36

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

128 138

SO-5076-128 >

192 202

SO-5076-192 >

256 266

SO-5076-256 >

320 330

SO-5076-320 >

128 138

SO-5076-128 >

192 202

SO-5076-192 >

256 266

SO-5076-256 >

320 330

SO-5076-320 >

128 138

SO-5076-128 >

192 202

SO-5076-192 >

256 266

SO-5076-256 >

320 330

SO-5076-320 >

128 142

SO-6330-128 >

192 206

SO-6330-192 >

256 269

SO-6330-256 >

320 334

SO-6330-320 >

7011

7105

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

102

608.8R16.096.007

128 134

608.8R16.128.007

160 166

608.8R16.160.007

256 262

608.8R16.256.007

102

608.8R16.096.003

128 134

608.8R16.128.003

160 166

608.8R16.160.003

256 262

608.8R16.256.003

320 326

608.8R16.320.003

448 454

608.8R16.448.003

102

608.8R18.096.003

128 134

608.8R18.128.003

160 166

608.8R18.160.003

256 262

608.8R18.256.003

320 326

608.8R18.320.003

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.37

7120

7128

7141

7202

8.38

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

128 140

608.8A16.128.003

160 172

608.8A16.160.003

256 268

608.8A16.256.003

128 178

608.8B17.128.003

160 210

608.8B17.160.003

256 306

608.8B17.256.003

320 370

608.8B17.320.003

128 188

608.8B16.128.003

160 220

608.8B16.160.003

256 316

608.8B16.256.003

320 380

608.8B16.320.003

448 508

608.8B16.448.003

111

608.8E18.096.003

128 144

608.8E18.128.003

160 176

608.8E18.160.003

256 272

608.8E18.256.003

320 337

608.8E18.320.003

8230

8645

8650

7092/08

7092/12

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

128 192

SO-8230-128 >

ABS

192 256

SO-8230-192 >

ABS

320 384

SO-8230-320 >

ABS

480 544

SO-8230-480 >

ABS

160 250

SO-8645-160 >

ABS

160 250

SO-8645-160 >

160 250

SO-8650-160 >

ABS

160 250

SO-8650-160 >

160 250

SO-8650-160 >

104

608.8B18.096.003

128 136

608.8B18.128.003

160 168

608.8B18.160.003

256 264

608.8B18.256.003

320 328

608.8B18.320.003

106

608.8B19.096.003

128 138

608.8B19.128.003

160 170

608.8B19.160.003

256 266

608.8B19.256.003

320 330

608.8B19.320.003

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.39

8.40

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

128

135

SO-A-128 >

160

167

SO-A-160 >

224

231

SO-A-224 >

320

327

SO-A-320 >

128

135

SO-A-128 >

160

167

SO-A-160 >

224

231

SO-A-224 >

320

327

SO-A-320 >

128

135

SO-A-128 >

160

167

SO-A-160 >

224

231

SO-A-224 >

320

327

SO-A-320 >

128

135

SO-B-128 >

160

167

SO-B-160 >

224

231

SO-B-224 >

320

327

SO-B-320 >

128

135

SO-B-128 >

160

167

SO-B-160 >

224

231

SO-B-224 >

320

327

SO-B-320 >

128

135

SO-B-128 >

160

167

SO-B-160 >

224

231

SO-B-224 >

320

327

SO-B-320 >

MH14

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Square Handles

Stefano Orlati Handles Square Handles

106

SO-D-96 >

106

SO-D-96 >

128 138

SO-D-128 >

SO-MH14-64 >

110

SO-MH14-96 >

128 141

SO-MH14-128 >

224 238

SO-MH14-224 >

320 333

SO-MH14-320 >

SO-MH14-64 >

110

SO-MH14-96 >

128 141

SO-MH14-128 >

224 238

SO-MH14-224 >

320 333

SO-MH14-320 >

SO-MH14-64 >

110

SO-MH14-96 >

128 141

SO-MH14-128 >

224 238

SO-MH14-224 >

320 333

SO-MH14-320 >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.41

8.42

128 149

Width (mm)

Height (mm)

Item number

Finish

OK90

Length (mm)

Centre (mm)

Stefano Orlati Handles Square Handles

SO-OK90-128 >

909

6820

8513

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stainless Steel Handles

Stefano Orlati Handles Stainless Steel Handles

128 142

SO-909-128 >

160 174

SO-909-160 >

224 238

SO-909-224 >

320 334

SO-909-320 >

480 494

SO-909-480 >

128 136

SO-6820-128 >

160 168

SO-6820-160 >

224 232

SO-6820-224 >

320 328

SO-6820-320 >

448 456

SO-6820-448 >

128 150

SO-8513-128 >

160 182

SO-8513-160 >

192 214

SO-8513-192 >

224 246

SO-8513-224 >

352 374

SO-8513-352 >

554 576

SO-8513-554 >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.43

8721

SSD

SSTB

8.44

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Stainless Steel Handles

128

138

SO-8721-128 >

160

170

SO-8721-160 >

192

202

SO-8721-192 >

224

234

SO-8721-224 >

320

330

SO-8721-320 >

448

458

SO-8721-448 >

128

138

SO-SSD-128 >

160

170

SO-SSD-160 >

192

202

SO-SSD-192 >

288

298

SO-SSD-288 >

352

362

SO-SSD-352 >

448

458

SO-SSD-448 >

136

SO-SSTB-96 >

128

168

SO-SSTB-128 >

160

200

SO-SSTB-160 >

192

232

SO-SSTB-192 >

288

328

SO-SSTB-288 >

352

392

SO-SSTB-352 >

448

488

SO-SSTB-448 >

544

584

SO-SSTB-544 >

139

809K

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Cabinet Knobs

Stefano Orlati Handles Knobs

SO-139-K >

SO-809-16 >

Complementary handles 809 page > 8.29

Side Profile

1112

1160

SO-1112-16 >

SO-1160S-K >

SO-1160L-K >

SO-1160S-K >

SO-1160L-K >

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.45

3515

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Knobs

608.8K21.012.008

608.8K21.020.008

608.8K21.025.008

1172

SO-1172-K >

1186K

SO-1186-K >

BSAT

SO-1186-K >

BSBN

Complementary handles 1208 page > 8.23 Complementary handles 1186 page > 8.23

3318

8.46

SO-3318-16 >

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Cabinet Knobs

Stefano Orlati Handles Knobs

3320

SO-3320-K >

3321

SO-3321-K >

3440K

SO-3440-K >

BSBN

SO-3440-K >

Complementary handles 1208 page > 8.23

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.47

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Knobs

3590

SO-3590-K >

3801

SO-3801-K >

Complementary handles 8391 page > 8.24 Complementary handles 8392 page > 8.24

8047

8.48

SO-8047-K >

8393

Item number

SO-8393-K >

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Cabinet Knobs

Stefano Orlati Handles Knobs

Complementary handles 8391 page > 8.24 Complementary handles 8392 page > 8.24

8741

SO-8741-K >

Complementary handle 8658 page > 8.24 Complementary handle 8407 page > 8.24

9909

Download supporting documentation from the Titus Tekform website titustekform.com.au

SO-9909-K >

8.49

C10

Item number

SO-C10-K >

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Knobs

WHC/P

Complementary handles C15 page > 8.25

C14

SO-C14-K >

WHC/P

Complementary handles C15 page > 8.25

GL02

GL03

8.50

SO-GL02-K >

CL/CH

SO-GL03-K >

CL/CH

MJ002

MJ003

CV30

Item number

Finish

Width (mm)

Height (mm)

Length (mm)

Centre (mm)

Cabinet Knobs

Stefano Orlati Handles Knobs

SO-MJ002-K >

SO-MJ003-K >

608.8K20.030.003

608.8K20.030.007

608.8K20.030.008

Download supporting documentation from the Titus Tekform website titustekform.com.au

8.51

9010

32 â&#x20AC;˘

8.52

Item number

608.8Z00.000.403

Suits 13mm - 18mm board thickness

Finish

Width (mm)

Length (mm)

Centre (mm)

Stefano Orlati Handles Push Button Locks

Innerware & Accessories

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.1

Innerware

Product Guide

Kitchen Innerware Page

Corner Solutions

9.4

Base Solutions

9.9

Pantry Solutions

9.13

Wire Drawers

9.17

Wire Storage Baskets

9.18

Kitchen Accessories

9.19

Laundry Innerware Tekno Laundry Hampers

9.20

Wire Basket Laundry Hampers

9.21

Wardrobe Innerware

9.2

Wardrobe Hanging Rail

9.22

GlideSoft RD Sliding Door Track

9.23

GlideSoft TP Sliding Door Track

9.27

Set 200

9.30

Titusoft SD100s

9.32

Drawer Inserts Kombi Cutlery Trays

9.37

Cutlery Inserts

9.40

Spice Trays

9.41

Utensil Organisers

9.42

Waste Bins Tidy Bins

9.45

Single Bins

9.46

Twin Pull-out Bins

9.47

Tekno Soft Close Bins

9.49

9.3

Kitchen Innerware Corner Solutions • • •

Min 500

Min 500 Min 450

Min 450

9.4

Right opening

OCW W

Item number

Left-hand

500

900

607.8D25.210.090

Right-hand

500

900

607.8D25.220.090

OCW W

Right opening

Min 500

OCW

Min 500

OCW

Left opening

Right-hand

Weight capacity per shelf (kg)

Left-hand

Width (mm)

Swivel Corner Unit

Min. internal carcase depth (mm)

•

Soft close damping technology Non-slip trays Easy access to corner storage Suitable for door openings 450/500mm

Min 450

Kitchen Innerware Corner Solutions • • • •

Width (mm)

Depth (mm)

Height (mm)

Weight capacity per frame (kg)

Full Access Corner Unit

Suits outside cabinet width (mm)

•

Soft close damping technology Polished chrome steel mesh baskets Complete access to corner storage Suitable for door openings 450/500mm Universal left and right hand opening Minimum 800mm cabinet install

Innerware & Accessories

•

Item number

450

615

525

595

607.8D25.595.045

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.5

Kitchen Innerware Corner Solutions • •

Easy Reach Corner Unit

OCW

440

OCW

Min 550

Ø7

Min 550

9.6

Weight capacity (kg)

•

270° rotation Round trip pull-out Pie-cut and round cabinet applications Adjustable frame Polished chrome steel mesh baskets

Height (mm)

•

Cabinet width (mm)

•

Item number

900

630-760

607.8D25.760.090

Kitchen Innerware Corner Solutions • •

Depth (mm)

Min dimensions (mm)

Weight capacity per frame (kg)

Item number

450

520

864-964

607.8D26.520.045

Right-handW 450

520

864-964

607.8D27.520.045

Opening direction

Suits outside cabinet width (mm)

•

Soft close damping techonology Left or right hand options Allows full access to unused space Polished chrome steel mesh baskets

Left-hand

Magic Corner Unit

OCW

OCW W

Min 510

Left opening

Left-hand

Innerware & Accessories

•

Right opening

OCW

Min 510

OCW

OCW W

Right-hand

Right opening

OCW

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.7

Kitchen Innerware Corner Solutions

9.8

Min. internal carcase depth (mm)

Cabinet height (mm)

270° Lazy Susan Corner Unit

270° 3/4 swivel basket

Suits outside cabinet width (mm)

•

Item number

800

710

565-790

607.8D25.070.090

900

820

720-1200

607.8D25.080.090

Kitchen Innerware Base Solutions •

Min. internal carcase depth (mm)

Height (mm)

Weight Capacity (kg)

Item number

Left-hand

200

500

595

607.8D92.465.020L

Right-hand

200

500

595

607.8D92.465.020R

Left-hand

300

500

595

607.8D92.465.030L

Right-hand

300

500

595

607.8D92.465.030R

440

Min 500

OCW

Suits cabinet width (mm)

Side Mount Pull-out Diamond Basket Utility Unit

Opening direction

•

Soft close damping technology Anti-slip solid base Hinged or panel door

Innerware & Accessories

•

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.9

Kitchen Innerware Base Solutions

Narrow Side Mount Pull-out Utility Unit

430

Min 500

OCW

9.10

Cabinet height (mm)

•

Soft close damping technology Polished chrome steel baskets 30kg load capacity

Min. internal carcase depth (mm)

•

Suits outside cabinet width (mm)

•

Item number

150

500

Min. 545

607.8D80.500.015

Kitchen Innerware Base Solutions •

Min. internal carcase depth (mm)

Height (mm)

Weight capacity (kg)

Item number

Left-hand

200

500

596

607.8D90.596.020L

Right-hand

200

500

596

607.8D90.596.020R

Left-hand

300

500

596

607.8D90.596.030L

Right-hand

300

500

596

607.8D90.596.030R

Min 500

OCW

Suits cabinet width (mm)

Side Mount Pull-out Utility Unit

Opening direction

•

Soft close damping technology Polished chrome steel mesh baskets Hinged or panel door

Innerware & Accessories

•

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.11

Kitchen Innerware Base Solutions

435

Min 500

OCW

9.12

Weight Capacity (kg)

Base Mount Pull-out Utility Unit

Height (mm)

•

Soft close damping technology Mounted on panel door Soft close bottom-mounted runners

Min. internal carcase depth (mm)

•

Suits cabinet width (mm)

•

Item number

400

500

595

607.8D91.465.040

450

500

595

607.8D91.465.045

Kitchen Innerware Pantry Solutions

•

Space Pantry Unit

Innerware & Accessories

•

Height (mm)

•

Depth (mm)

•

Soft close damping technology 5 anti-slip base trays Solid base with glass basket Universal left and right hand opening Full extension 100kg load capacity Height adjustable from 1720-2020mm

Width (mm)

•

Suits outside cabinet width (mm)

•

Item number

500

445

500

1720-2020

607.8D57.197.050

600

545

500

1720-2020

607.8D57.197.060

•

Min. internal carcase depth 535mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.13

Kitchen Innerware Pantry Solutions Soft close damping technology Polished chrome steel mesh baskets Full extension 100kg load capacity Height adjustable from 1860-2200mm Adjustable door mounting brackets for easy fitting

• • • •

Min 550 460

Min 550

Height (mm)

Item number

300

250

500

1860-2050

607.8D55.222.030

400

345

500

1860-2050

607.8D55.222.040

450

395

500

1860-2200

607.8D55.222.045

500

445

500

1860-2200

607.8D55.222.050

OCW

9.14

Depth (mm)

OCW

Width (mm)

Pull-out Pantry Unit with Soft Close

Suits outside cabinet width (mm)

•

Min. internal carcase depth 535mm

Kitchen Innerware Pantry Solutions

Deluxe Pantry Unit

Innerware & Accessories

Height (mm)

•

Depth (mm)

•

Soft close damping technology Polished chrome steel mesh baskets Full extension 60kg load capacity Universal left and right hand opening

Width (mm)

•

Suits outside cabinet width (mm)

•

Item number

450

384

455

1840-1970

607.8D56.197.045

600

534

455

1840-1970

607.8D56.197.060

•

Min. internal carcase depth 535mm

OCW

Min 550

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.15

Kitchen Innerware Pantry Solutions

9.16

Width (mm)

Compact Pull-out Pantry

Fits 400mm wide cabinets Steel with chrome baskets and grey frame

Height (mm)

â&#x20AC;˘

Suits outside cabinet width (mm)

â&#x20AC;˘

Item number

400

935 - 1300

490

KA50106

Kitchen Innerware Wire Drawers

Wire Drawers with Soft Close

Innerware & Accessories

450

410-418

453

200

607.8D15.200.045

500

460-468

453

200

607.8D15.200.050

600

560-568

453

200

607.8D15.200.060

800

760-768

453

200

607.8D15.200.080

900

860-868

453

200

607.8D15.200.090

400

360-368

453

135

607.8D15.135.040

450

410-418

453

135

607.8D15.135.045

500

460-468

453

135

607.8D15.135.050

600

560-568

453

135

607.8D15.135.060

800

760-768

453

135

607.8D15.135.080

900

860-868

453

135

607.8D15.135.090

32.2

Item number

150/215

32.2

Height (mm)

•

Depth (mm)

•

Soft close damping technology Pull-out wire drawers for kitchen storage Polished chrome steel mesh baskets Weight capacity 40kg

Width (mm)

•

Suits outside cabinet width (mm)

•

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.17

Depth (mm)

Height (mm)

Wire Storage Basket with slides

Internal cabinet width (mm)

Kitchen Innerware Wire Storage Baskets

Item number

466

400

200

607.8F02.168.002

566

400

200

607.8F02.170.002

393

450

140

607.8F02.174.002

393

450

200

607.8F02.172.002

416

450

140

607.8F02.178.002

416

450

200

607.8F02.176.002

â&#x20AC;˘

9.18

White finish

Innerware & Accessories

Kitchen Accessories Kitchen Towel Rails

Tea Towel Rail

Arms

Length (mm)

Finish

Item number

470

Chrome

607.8G03.890.200

300

Chrome

607.8G00.905.300

380

Chrome

607.8G00.905.380

Made of steel D-shape Tea Towel Rail

Made of steel

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.19

Laundry Innerware Tekno Softclose Hampers •

Laundry Hamper

9.20

Hampers suitable for use with Tekform Drawer For Tekno waste bins see page 9.43

To suit cabinet width (mm)

Height (mm)

Width (mm)

Depth (mm)

•

Capacity

Mounting

Closing

Item Number

510

368

575 400

1x 35L

Door

Soft Close

607.8G07.435.271

510

418

550 450

1x 48L

Door

Soft Close

607.8G07.450.351

510

568

575 600

2x 35L

Door

Soft Close

607.8G07.470.241

Laundry Innerware Hampers •

Wire basket laundry hamper solutions For Tekno Laundry Hampers > see page 9.45

Width (mm)

Depth (mm)

Tilting Laundry Hamper

Height (mm)

Innerware & Accessories

•

Item number

495

406

377

607.8E60.406.007

• •

Laundry Hamper for Drawers

Includes flap stay Chrome finish

600 • •

Download supporting documentation from the Titus Tekform website titustekform.com.au

370

460

607.8E60.307.001

Mounts to drawer front and base White powder coated finish

9.21

Length (mm)

Height (mm)

Width (mm)

End Flange

Profile

Wardrobe Hanging Rail

Finish

Wardrobe Innerware

Item number

Chrome

Round

3000

607.8E20.025.407

Chrome

Round

3000

607.8E20.019.317

Chrome

Oval

3000

607.8E21.030.307

Chrome

Round

607.8E20.025.307

Chrome

Round

607.8E20.019.307

Chrome

Oval

•

End Pillar

Round

607.8E20.025.107

Chrome

Round

607.8E20.019.107

Chrome

Oval

607.8E21.030.109

To use with wardrobe hanging rail

Chrome

Round

607.8E20.025.207

Chrome

Round

607.8E20.019.207

Chrome

Oval

•

9.22

To use with wardrobe hanging rail

Chrome

•

Centre Pillar

607.8E21.030.204

To use with wardrobe hanging rail

607.8E21.030.209

Wardrobe Sliding Track GlideSoft RD • • • • • •

Finish

Length (mm)

•

Floor to ceiling panel system Takes 10mm or 4mm panel, glass or acrylic Centre door soft close option Maximum width 3.6m Minimum width 600mm Installation depth 76mm Maximum installation height 2480mm 60kg weight capacity per door

Innerware & Accessories

•

Item number

GlideSoft RD Handle Profile

Aluminium

2400

608.8V02.010.003

GlideSoft RD Handle U Profile

Aluminium

2400

608.8V02.010.004

GlideSoft RD Top Track

Aluminium

3600

608.8V02.010.001

GlideSoft RD Bottom Track

Aluminium

3600

608.8V02.010.002

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.23

Wardrobe Sliding Track GlideSoft RD Fitting Kits

Item number

GlideSoft RD 1 Door Fitting Kit

608.8V02.010.006 Kit includes: 2x top mechanism 2x bottom mechanism Fixing screws • • •

GlideSoft RD Standard Close Stop Kit

608.8V02.010.010 Kit includes: Standard rest mechanism 2x support stops • •

9.24

• • •

Compact design for bottom running tracks Effortless door opening Flexible mounting position

Innerware & Accessories

Wardrobe Sliding Track GlideSoft RD Damping Options

Item number

GlideSoft RD Left & Right Damping Kit

608.8V02.010.008 Kit includes: 1x left soft close damper 1x right soft close damper Fixing screws • • •

GlideSoft RD Centre Damping Kit

608.8V02.010.009 Kit includes: 1x centre soft close damper Fixing screws • •

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.25

GlideSoft RD Brush Strip, 9.5mm

Length (mm)

Wardrobe Sliding Track GlideSoft RD Products

Item number

9.5

608.8V02.010.012

•

GlideSoft RD Brush Strip, 6mm

6 •

GlideSoft RD Gasket for 4mm Glass

Brush strip for application to both sides of each door

608.8V02.010.014

Applied to the back of the door as a wedge when using 4mm panels

2400 •

9.26

608.8V02.010.013

3600 •

GlideSoft RD 20mm Coverstrip

Brush strip for application to the back of the front door

608.8V02.010.005

Thin aluminium strip used to cover the joint when using multiple panels for doors

Wardrobe Sliding Track GlideSoft TP • • • • •

Finish

Length (mm)

•

Cabinet based panel system For 16mm standard and 18mm routed panels Maximum width 3.6m Minimum width 600mm Installation depth 145mm Centre rest kit for centre doors 50kg weight capacity per door

Innerware & Accessories

•

Item number

GlideSoft TP Handle Profile

Aluminium

2400

608.8V02.020.003

GlideSoft TP Handle U Profile

Aluminium

2400

608.8V02.020.004

GlideSoft TP Top Track

Aluminium

3600

608.8V02.020.001

GlideSoft TP Bottom Track

ABS

3600

608.8V02.020.002

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.27

Wardrobe Sliding Track GlideSoft TP Fitting Kits

Item number

GlideSoft TP 2 Door Fitting Kit

608.8V02.020.005 Kit includes: 1x Type 1 top mechanism set 1x Type 2 top mechanism set 1x Type 1 bottom rail runner set 1x Type 2 bottom rail runner set Fixing screws • • • • •

GlideSoft TP 3 Door Fitting Kit

608.8V02.020.006 Kit includes: 1x Type 1 top mechanism set 2x Type 2 top mechanism set 1x Type 1 bottom rail runner set 2x Type 2 bottom rail runner set Fixing screws • • • • •

9.28

• • • • • • •

Cabinet based panel system For 16mm standard and 18mm routed panels Maximum width 3.6m Minimum width 600mm Installation depth 145mm Centre rest kit for centre doors 50kg weight capacity per door

Innerware & Accessories

Wardrobe Sliding Track GlideSoft TP Closing Options

Item number

GlideSoft TP Left & Right Damping Kit

608.8V02.020.007 Kit includes: 2x soft close dampers 1x large actuator 1x small actuator 2x support blocks Fixing screws • • • • •

GlideSoft TP Standard Close Stop Kit

608.8V02.020.008 Kit includes: Standard rest mechanism •

GlideSoft TP Centre Rest Kit

608.8V02.020.009 Kit includes: Centre rest mechanism •

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.29

Set 200 Sliding Door Mechanism

Top carriage

Stopper

Set for 3-doors

Nut

Item number for set

Set for 2-doors

Top profile

For bottom running sliding door systems

610.9691.380 >

Bottom carriages

4 pcs

6 pcs

Top carriages

4 pcs

6 pcs

Pan head screws

32 pcs

48 pcs

Stopper

4 pcs

6 pcs

Nut for stopper

4 pcs

6 pcs

Screw M4 x 16 for stopper

4 pcs

6 pcs

Self adhesive tape

5 pcs

Mounting instructions

1 pc

Set consists of the following components

Bottom profile

Bottom carriage

20 sets Rails and accessories are not included in the set and can be ordered separately Rails

Accessories Top rail > see page 9.34

9.30

Bottom rail > see page 9.34

Titusoft SD100s > see page 9.32

max. 50kg 18-22mm wood (chipboard, MDF, solid wood)

Innerware & Accessories

· Door weight · Door thickness · Door material

Mounting details

Door drilling pattern

Min. 82mm

206

X - 57

206

X = space available between top and bottom panel X - 57 = door height

Top and bottom carriage drilling positions

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.31

Min. 82mm

Ø5 x 12.5

Titusoft SD100s Add-on Damper for Set 200

Item number Titusoft SD100s

973.9060 >

The system consists of the folowing components Standard component

Grey

For bottom running sliding door systems

380

Quantity for 2-door cabinet

2 pcs

Titusoft SD100s mechanism

Customised components to suit the customer's sliding door system

Attachment base

4 pcs

Nut

4 pcs

Screw M4 x 16

4 pcs

28 28

185 185.1

320 320

18 18

331 331

9.32

路路路路

Non-handed design Effortless door opening with low pull-out force Efficient damping on different door sizes Slim design for concealed application

Titusoft SD100s capacity

Innerware & Accessories

50kg

Up to 50kg per door

Mounting details Non-handed design

Mounting position

Titusoft SD100s is mounted into the top profile

Mount Titusoft SD100s on top rail on both sides of the cabinet. (1 pc Titusoft SD100s per 1 door) Fit various U and double U shaped profiles

Space requirements

Slim design with 30mm height allows for concealed application

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.33

Rail For Set 200

Rail length

Screws for top rail are not supplied and depend on the application (cabinet, built-in cabinet). Bottom rail is fixed with self-adhesive tape. Rail is pre-drilled and ready to install.

Technical details

48 48

Top rail

Item number

2000

610.9692.070.K1

2400

610.9693.070.K1

3000

610.9694.070.K1

*other lengths upon request 82 82

Set consists of:

Top rail

1 pc

Bottom rail

1 pc

5.5

Bottom rail

57 57.2

5 sets

9.34

Innerware & Accessories Download supporting documentation from the Titus Tekform website titustekform.com.au

9.35

Drawer Inserts

9.36

Drawer Inserts Kombi Cutlery Trays •

Kombi Cutlery Tray, 500mm

400

441-500

301-350

607.8F22.040

400

441-500

301-350

607.8F22.040

202

450

370-440

351-400

607.8F22.045

102

450

441-500

351-400

607.8F22.045

450

441-500

351-400

607.8F22.045

500

441-500

401-450

607.8F22.050

500

441-500

401-450

607.8F22.050

Download supporting documentation from the Titus Tekform website titustekform.com.au

Metallic

Width (mm)

Kombi Cutlery Tray, 450mm

Depth (mm)

Kombi Cutlery Tray, 400mm

To suit drawer width (mm)

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Easy clean surface

Drawer Inserts

•

Item number

White

•

201

201 202

9.37

Drawer Inserts Kombi Cutlery Trays • •

Depth (mm)

Width (mm)

550

441-500

451-500

607.8F22.055

550

441-500

451-500

607.8F22.055

202

600

370-440

501-550

607.8F22.060

102

600

441-500

501-550

607.8F22.060

600

441-500

501-550

607.8F22.060

Kombi Cutlery Tray, 650mm

650

441-500

551-600

607.8F22.065

Kombi Cutlery Tray, 700mm

700

370-440

601-650

607.8F22.070

700

441-500

601-650

607.8F22.070

700

441-500

601-650

607.8F22.070

Kombi Cutlery Tray, 550mm

Kombi Cutlery Tray, 600mm

9.38

Metallic

To suit drawer width (mm)

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Easy clean surface

Item number

White

•

201

201 202

201

102 201 202

Drawer Inserts Kombi Cutlery Trays •

Kombi Cutlery Tray, 1000mm

800

441-500

701-750

607.8F22.080

800

441-500

701-750

607.8F22.080

900

441-500

801-850

607.8F22.090

900

441-500

801-850

607.8F22.090

1000

441-500

901-950

607.8F22.100

1000

441-500

901-950

607.8F22.100

Download supporting documentation from the Titus Tekform website titustekform.com.au

Metallic

Width (mm)

Kombi Cutlery Tray, 900mm

Depth (mm)

Kombi Cutlery Tray, 800mm

To suit drawer width (mm)

•

Full usage of the drawer Suitable for all drawer types High quality plastic material Easy clean surface

Drawer Inserts

•

Item number

White

•

201 202

9.39

Drawer Inserts Cutlery Inserts • • •

Width (mm)

346-435

306-450

607.8F03.101

001

450

362-484

357-445

607.8F03.102

001

Cutlery Insert, 550mm

550

373-483

482-532

607.8F03.107

001

Utensil Trays, 450mm

450

441-500

351-400

607.8F23.045

201

450

441-500

351-400

607.8F23.045

600

441-500

501-550

607.8F23.600

600

441-500

501-550

607.8F23.600

Utensil Trays, 600mm

9.40

Item number

White

Depth (mm)

450

Cutlery Insert, 450mm

Metallic

To suit drawer width (mm)

•

High-impact Styrene Injection moulds Uniform thickness Trim for versatility to suit most drawers

202

201 202

Drawer Inserts Spice Trays • •

Depth (mm)

Width (mm)

Item number

450

430-520

350-390

607.8G23.045

450

430-520

350-390

607.8G23.045

002

Spice Tray, 500mm

500

430-520

400-440

607.8G23.050

002

Spice Tray, 600mm

600

430-520

500-540

607.8G23.060

600

430-520

500-540

607.8G23.060

800

430-520

700-740

607.8G24.080

800

430-520

700-740

607.8G24.080

900

430-520

800-840

607.8G24.090

900

430-520

800-840

607.8G24.090

Spice Tray, 450mm

Spice / Cutlery Tray, 800mm

Spice / Cutlery Tray, 900mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

Grey

White

To suit drawer width (mm)

•

High-impact Styrene Injection moulds Uniform thickness Trim for versatility to suit most drawers

Drawer Inserts

•

001

001 002

9.41

Drawer Inserts Utensil Organisers

Triple Cutlery Organiser

Cutlery Utensil Organiser, 208mm Range

Cutlery Utensil Organiser, 309mm Range

Cutlery Utensil Organiser, 377mm Range

9.42

Stainless steel

Durable and attractive stainless steel Designed to provide a space left or right of the tray for long utensils

Width (mm)

â&#x20AC;˘

Depth (mm)

â&#x20AC;˘

450

280

607.8E12.208

459

500

280

607.8E12.208

509

550

280

607.8E12.208

559

450

208

607.8E13.208

459

500

208

607.8E13.208

509

550

208

607.8E13.208

559

450

309

607.8E13.308

459

500

309

607.8E13.308

509

550

309

607.8E13.308

559

450

377

607.8E13.377

459

500

377

607.8E13.377

509

550

377

607.8E13.377

559

Item number

Drawer Inserts Utensil Organisers â&#x20AC;˘

Durable and attractive stainless steel Designed to maximise your drawer space and versatility

Single Utensil Organiser

Download supporting documentation from the Titus Tekform website titustekform.com.au

Width (mm)

Double Utensil Organiser, Large

Depth (mm)

Double Utensil Organiser

Stainless steel

Innerware & Accessories

â&#x20AC;˘

450

202

607.8E12.202

459

500

202

607.8E12.202

509

550

202

607.8E12.202

559

450

291

607.8E12.291

459

500

291

607.8E12.291

509

550

291

607.8E12.291

559

450

105

607.8E12.105

459

500

105

607.8E12.105

509

550

105

607.8E12.105

559

Item number

9.43

Waste Bins

9.44

Waste Bins Single Bins •

Removable hi-impact bin for easy cleaning Right or left opening

Tidy Bin 8L

Item number

280

Door

607.8G03.008

300 300

280

Door

607.8G03.008

Door

607.8G03.012

201 209

Automatic opening lid

290 290 •

White

Mounting

Stainless steel

Height (mm)

Capacity

300 300

•

Tidy Bin 12L

Width (mm)

Depth (mm)

Waste Bins

•

320

12L

201

Automatic opening lid

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.45

Waste Bins Single Bins •

Bottom Mounted Tidy Bin

360 262 • • • • •

9.46

Height (mm)

Width (mm)

Depth (mm)

•

310

Soft close damping technology Closed lid position minimises odours Removable hi-impact bin for easy cleaning

Capacity

Mounting

Item number

15L

Bottom

607.8G03.115

Ideal for apartment/townhouse environment Small bin to suit vanity Perfect for under sink applications Simple DIY installation to the base of the cabinet Soft close ball bearing runners

White

•

101

Waste Bins Pull-out Twin Bins •

Closed lid position minimises odours Removable hi-impact plastic bins for easy cleaning

Twin Bin Pull-out with Metal Frame, Bottom Mounted

Mounting

Item number

510 262 420

30L

Bottom

607.8G03.030

510 262 420

30L

Bottom

607.8G03.030

607.8G06.130

• • •

• •

001 007*

Right or left opening Sturdy, hi-impact frame 1x 20L bucket and 1x 10L bucket To suit 300mm cabinet

490 262 420 •

White

Grey

Height (mm)

Capacity

•

Twin Bin Pull-out with Metal Frame, Door Mounted

Width (mm)

Depth (mm)

Waste Bins

•

30L

Door

231

Sturdy, hi-impact frame 1x 20L bucket and 1x 10L bucket To suit 300mm cabinet

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.47

Waste Bins Pull-out Twin Bins

Twin Bin Pull-out Double Bins with Metal Frame

Height (mm)

Mounting

Item number

510 340 320

2x 15L

Bottom

607.8G06.030

101

510 340 380

2x 18L

Bottom

607.8G06.036

001

490 340 320

2x 15L

Door

607.8G06.030

201

490 340 380

2x 18L

Door

607.8G06.036

201

• •

Ideal for low shelf applications or plumbing Sturdy, hi-impact frame To suit 400mm cabinet

470 464 470

1x 28L 2x 17L

Door

607.8G06.156

251

470 564 470

2x 28L

Door

607.8G06.156

261

• •

9.48

Closed lid position minimises odours Removable hi-impact plastic bins for easy cleaning

Capacity

•

Twin Bin XL Pull-out with Metal Frame

Width (mm)

Depth (mm)

•

White

•

Sturdy, hi-impact frame Door panel attaches directly to bin

Waste Bins Tekno Softclose Bins • •

Tekno Bin with Soft Close 26L

26L

Mounting

Closing

Item number

Door

Soft Close

607.8G06.304.040

36L

Door

Soft Close

607.8G06.302.040

Door

Soft Close

607.8G06.300.040

Includes 2x 18L buckets

506 368 570 •

Capacity

Includes 2x 13L buckets

506 368 470 •

Tekno Bin with Soft Close 35L

Height (mm)

506 368 340 •

Tekno Twin Bin with Soft Close 36L

Width (mm)

Depth (mm)

Waste Bins

•

To suit 400mm outside cabinet width Bins suitable for use with Tekform Drawer For Tekno Laundry Hampers, see page 9.20

35L

Includes 1x 35L bucket

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.49

Waste Bins Tekno Softclose Bins •

Tekno Bin with Soft Close

Closing

Item number

506 418 470

2x 21L

Door

Soft Close

607.8G04.442.171

506 418 570

2x 27L

Door

Soft Close

607.8G04.454.151

Soft Close

607.8G04.439.151

Soft Close

607.8G06.307.040

To suit 450mm cabinet width

506 468 470

1x 21L 2x 9L

Door

To suit 500mm cabinet width

506 562 570 •

9.50

Height (mm)

Mounting

•

Tekno Twin Bin with Soft Close 70L

Bins suitable for use with Tekform Drawer For Tekno Laundry Hampers, see page 9.20

Capacity

•

Tekno Twin Bin with Soft Close 39L

Width (mm)

Depth (mm)

•

2x 35L

Door

To suit 600mm cabinet width

Waste Bins Tekno Softclose Bins •

Bins suitable for use with Tekform Drawer For Tekno Laundry Hampers, see page 9.20

Tekno Undermount Bin

506 • •

•

Tekno Side Mount Bin

Height (mm)

Width (mm)

Depth (mm)

Waste Bins

•

412-418

590

Capacity

70L

Mounting

Closing

Item number

Undermount

Soft Close

607.8G06.235.450

To suit 450mm cabinet Supplied complete with undermount soft close drawer runners Includes 2x 35L buckets

510

312

350

26L

Side Mount

Soft Close

607.8G08.526.281

510

312

480

36L

Side Mount

Soft Close

607.8G08.536.281

• •

•

To suit 350mm cabinet width Supplied complete with side mount soft close ball bearing drawer runners Includes 2x 13L buckets (26L) or 2x 18L buckets (36L)

Spare Tekno Softclose 400mm Bin Frame 513

368

Soft Close

607.8G06.308.040

Spare Tekno Softclose 600mm Bin Frame 513

568

Soft Close

607.8G06.309.040

Spare Tekno Bin Bucket

18L

607.8G06.310.180

Spare Tekno Bin Bucket

13L

607.8G06.309.130

35L

607.8G06.309.350

Spare Tekno Bin Bucket •

Replacement parts for Tekno Bins

Download supporting documentation from the Titus Tekform website titustekform.com.au

9.51

x.1

Download supporting documentation from the Titus Tekform website titustekform.com.au

LED Lighting

Stefano Orlati LED Lighting

x.2

LED Lighting Product Guide

LED Downlights Page

Imperia Downlights

10.6

LED Strip Lights Information

10.9

12V Strip Lighting

10.11

24V Strip Lighting

10.14

Colour Temperature Tuneable Strip Light

10.16

RGBW Multicolour Controller

10.17

LED Lighting Accessories

10.2

LED Profiles

10.18

LED Sensors

10.29

Lighting Panels & Controllers

10.35

LED DIY & Accessories

10.39

LED Transformers

10.41

LED Lighting

LED Lighting Information

Features

LED Lighting is an extremely effective design tool which can be used to transform and nhance a space. Stefano Orlati lighting offers both functional and decorative a plications – with its key roles being task & mood lighting. There are so many clever ways to incorporate LED Lighting into an interior scheme. In the kitchen, the addition of under-cabinetry lighting can enhance & open up a space. In the bathroom practical lighting can be incorporated such as ensuring the mirror is well lit or using a Dimmer to control the brightness and mood of the space. Using strip lights or downlights in an open shelf or an entertainment unit is a great accent lighting option which can elevate & highlight the space. LED Lighting is safe, environmentally friendly & contains no toxic mercury. It uses approx. 85% less energy than halogen or incandescent lights.

Benefits

• Energy efficient • Low maintenance • Plug & Play • Contains no mercury or lead • Emits no UV rays or infrared radiation • Achieves full brightness in microseconds • Operates at a much cooler temperature making it safer than incandescent lights • Environmentally friendly – cuts greenhouse gas emissions and reduces landfill • Lifetime of approx. 30,000 to 60,000 or more hours depending on the type of LED light

Lighting Product Warranty and Test Certificates

All Stefano Orlati lighting products offer you the warranties extended to you under consumer protection legislation. Our warranty is for one year from the date of purchase. The warranty is void if the lighting products are used with a transformer sourced from another supplier. Electrical equipment tested to the below electrical standard: • Approval (AS/NZS 61558. 1:2008+A1+A2 , AS/NZS 61558.2.16:2010 + A1+A2+A3) • Supplier Declaration of Conformity (SDOC) certificate available on request Also registered with ERAC Electrical Regulators who apply the EESS and ACMA Responsible supplier: Stefano Orlati Limited Responsible supplier number: E6076 ABN/IRDN: 78859385

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.3

LED Lighting Information

Frequently Asked Questions

Why LEDs? LED lighting uses 85% less electricity than typical incandescent and fluorescent light sources. LEDs provide us with the most efficient way to save energy and conserve our natural resources. The light produced from an LED is an even spectrum and can last beyond 10 years (30,000 – 60,000 hours or more). What does LED mean simply? LED = light emitting diode, which are ‘solid-state lighting’ components. Each individual LED consists of a semiconductor diode that emits light when a voltage is applied to it. Does turning LED lights on and off reduce lifetime? No. Unlike incandescent and fluorescent lighting which will fail sooner when switched on or off more often, LED Lighting is unaffected by how often it is switched on or off. Do LED lights produce UV and/or IR emissions or contain Mercury? No. LED lighting products typically produce virtually no light in the Ultraviolet (UV) or Infrared (IR) spectrums. LED bulbs do not contain mercury. They can even be recycled as they do not contain hazardous substances and are manufactured without hazardous substances. Can LED lights be dimmed? Yes, most of our range of LED lights can be dimmed – refer to the Dimmer Controller on page 10.33. Do the LED diodes need to be replaced? An LED diode does not “burn out” like a conventional lamp, so individual diodes do not need to be replaced. Do LEDs overheat? LEDs consume significantly less energy and operate at lower temperatures than typical incandescent bulbs. Most of the energy emitted from an incandescent bulb is converted into heat instead of light which is why you’ll burn yourself if you try to touch it once it’s turned on. In many cases you can actually feel the temperature diffe ence just by being near the light. The beam of light source from an LED is cool, however waste heat is produced within the LED itself during the conversion of electricity into light. The waste heat must be properly removed from the light to maximize fixture performance and to avoid damage to the LEDs. This is why all LED Strip Light options are recommended to be used in conjunction with an LED Profile. The LED Profiles are well-designed lighting fixtures which act as heat sinks to draw heat away from the LEDs and dissipate it into the air surrounding the profile, thus prolonging the life of the LED diodes. Is LED a different type of light? Yes. LED light is said to be a safer, healthier light, because LEDs do not produce any form of ultraviolet radiation which causes colour fading in art & fabric, such as carpet fading etc. With LED Lights there is also no buzzing or flickering

10.4

LED Lighting

LED Lighting Information

LED Symbol Guide

Made to Measure MTM

Door Motion Sensor DOOR

Do It Yourself DIY

Hand Motion Sensor HAND

Dimmer Control DIM

PIR Motion Sensor PIR

LED Profil PROFILE

Touch Dimmer TD

Order Forms

As a helpful guide when ordering, request an LED Lighting order form or call us to discuss your requirements.

Download order forms online â&#x20AC;&#x201C; www.titustekform.com.au

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.5

LED Lighting Imperia Downlights • • • • • • •

Round Matt Black Imperia Downlight

Ø54.0

Hole cut out size

Ø62.0

Cool White, Warm White or Daylight White Finishes - Matt Black, Foggy Silver and Satin Nickel Plug & Play installation Lamp voltage - 24V Lamp wattage - 3W Can be used in conjunction with sensors & dimmer control Has a 2m lead

Item number

Description

612.8D20.001.007

Cool White

612.8D20.002.007

Warm White

612.8D20.003.007

Daylight White

612.8D20.000.007

Surface Mounted Bracket

Square Matt Black Imperia Downlight

Ø54.0

Ø62.0

Note: Can be wall-mounted or used as a hand held device. Batteries not included.

612.8D20.001.008

Cool White

612.8D20.002.008

Warm White

612.8D20.003.008

Daylight White

612.8D20.000.008

Surface Mounted Bracket

Note: Can be wall-mounted or used as a hand held device. Batteries not included.

10.6

LED Lighting Imperia Downlights • • • • • •

LED Lighting

•

Round Foggy Silver Imperia Downlight

Ø54.0

Hole cut out size

Ø62.0

Item number

Description

612.8D20.001.003

Cool White

612.8D20.002.003

Warm White

612.8D20.003.003

Daylight White

IMPERIA-BRACKET

Surface Mounted Bracket

Square Foggy Silver Imperia Downlight

Ø54.0

Ø62.0

Note: Can be wall-mounted or used as a hand held device. Batteries not included.

612.8D20.001.005

Cool White

612.8D20.002.005

Warm White

612.8D20.003.005

Daylight White

612.8D20.000.005

Surface Mounted Bracket

Note: Can be wall-mounted or used as a hand held device. Batteries not included.

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.7

LED Lighting Imperia Downlights • • • • • •

LED Sensors

•

Round Satin Nickel Imperia Downlight

Ø54.0

Hole cut out size

Ø62.0

Item number

Description

612.8D20.001.004

Cool White

612.8D20.002.004

Warm White

612.8D20.003.004

Daylight White

612.8D20.000.004

Surface Mounted Bracket

Square Satin Nickel Imperia Downlight

Ø54.0

Ø62.0

Note: Can be wall-mounted or used as a hand held device. Batteries not included.

612.8D20.001.006

Cool White

612.8D20.002.006

Warm White

612.8D20.003.006

Daylight White

612.8D20.000.006

Surface Mounted Bracket

Note: Can be wall-mounted or used as a hand held device. Batteries not included.

10.8

Products And Services (6000K)

LED strip lights are a brilliant option for task and mood lighting and help to create ambiance and definition of a space. Common areas of application include kitchen & bathroom lighting, under-cabinetry lighting, shopfitting & or display lighting, signage, architectural lighting, and any other confined spaces requiring additional light.

Task Lighting

Decorative Lighting

Enhance the strip light by adding an LED Profile option.

What Are Your Options With LED Strip Lights?

MTM

Made to Measure (MTM) Custom made lengths fabricated by us to your measurements. Each MTM strip light includes a soldered 2m tail or wire connectors for corners etc. (depending on requirements).

Do It Yourself (DIY) Choose your required LED components. DIY strip lights are available in 5m rolls and include a tail soldered on each end. DIY

Ordering

MTM All MTM codes are specified on each product. When ordering MTM strip lighting, please order using the following code string, for example: [SPECIFY MEASUREMENTS] CODE: MTM-3528-CW

DIY All DIY codes are specified on each product. When ordering DIY strip lighting please order using the following code string for example: [SPECIFY QUANTITY] CODE: DIY-3528-CW

Order Forms

As a helpful guide when ordering, request an LED Lighting order form or call us to discuss your requirements. Download order forms online â&#x20AC;&#x201C; www.titustekform.com.au

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.9

LED Lighting

LED Lighting LED Strip Lights

IP Rating IP is a rating guide for the strip light for the level of protection from solids/water. Stefano Orlati Strip Lights are available in IP20 & IP65. IP = Ingress Protection. IP20 - No Coating 2 = Protected against solid objects over 12.5mm 0 = No protection from liquids/water

IP65 - Clear Water Resistant Coating 6 = Total protection against dust ingress 5 = Protection against low pressure water jets from all directions. Limited ingress protection

Diode Guide The diodes on the LED Strip Light range in size and each will vary in brightness depending on a number of factors: • The size of the diode • The amount of diodes per meter • The total watts per meter 3014 = 3.0mm x 1.4mm (diode size)

10.10

3528 = 3.5mm x 2.8mm (diode size)

5050 = 5.0mm x 5.0mm (diode size)

LED Lighting LED Strip Lights

Options MTM

12V 3528 Standard IP20

Daylight White (4000k)

Item number

COOL WHITE

WARM WHITE

BLUE

RED

GREEN

AMBER

MTM-3528 >

BLUE

RED GREEN AMBER

DIY-3528 >

BLUE

RED GREEN AMBER

Diode Size

3.5mm x 2.8mm

Diodes (per/m)

Voltage

12V DC

Energy (watts)

4.8 per/m

Width

8mm

Projection

3mm

Viewing Angle

120°

Waterproof Rating

IP20

Dimmable

Yes

Lumens (per/m)

Daylight White - 300 Cool White - 300 Warm White - 300 Amber - 65 Blue - 45

DIY

All DIY components are supplied separately and are recommended for strip light only options (no profile). Available in a 5 meter roll & includes a tail soldered on each end.

Green - 200 Red - 110 Transformer 12V

Maximum run 10 meters

* If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.27

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.11

LED Lighting

Plug & Play installation Cuttable in 50mm increments Self-adhesive peel and stick backing Best suited for an area hidden from view Choose any LED Profile option Recommended to be used in conjunction with an LED profile which assists with heat dissipation & ensures longevity of the LED diodes

WARM WHITE

Technical and mounting details

Amber

•

PIR

Green

•

HAND

Red

•

DOOR

Blue

•

PROFILE

Warm White (3200k)

•

DIM

Cool White (6000k)

•

DIY

LED Lighting LED Strip Lights

Options MTM

• • •

12V 3528 Water Resistant IP65

PIR

Plug & Play installation Cuttable in 50mm increments Self-adhesive peel and stick backing Best suited for an area hidden from view Clear water-resistant coating Recommended for strip light only options

(6000K)

(3200K)

Technical and mounting details

HAND

(3200K)

Item number

WARM WHITE

COOL WHITE

WARM WHITE

Warm White (3200k)

•

DOOR

Cool White (6000k)

•

DIM

Daylight White (4000k)

•

DIY

MTM-3528-IP65 >

DIY-3528-IP65 >

Diode Size

3.5mm x 2.8mm

Diodes (per/m)

Voltage

12V DC

Energy (watts)

4.8 per/m

Width

8mm

Projection

3mm

Viewing Angle

120°

Waterproof Rating

IP65

Dimmable

Yes

Lumens (per/m) Daylight White - 300 Cool White - 300 Warm White - 300 Transformer 12V

Maximum run 10 meters

DIY

All DIY components are supplied separately and are recommended for strip light only options (no profile). Available in a 5 meter roll & includes a tail soldered on each end. * If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.27

10.12

LED Lighting LED Strip Lights

Options MTM

• • • •

PROFILE

DOOR

HAND

PIR

Up to three times brighter than 3528 Standard Strip Light Plug & Play installation Cuttable in 50mm increments Self-adhesive peel and stick backing Recommended to be used in conjunction with an LED profile which assists with heat dissipation & ensures longevity of the LED diodes

12V 5050 Extra Bright IP20

MTM-5050 >

Diode Size

5.0mm x 5.0mm

Diodes (per/m)

Voltage

12V DC

Energy (watts)

14.4 per/m

Width

10mm

Projection

3mm

Viewing Angle

120°

Waterproof Rating

IP20

Dimmable

Yes

Warm White (3200k)

Item number

Cool White (6000k)

Technical and mounting details

Daylight White (4000k)

WARM WHITE COOL WHITE WARM WHITE (6000K) (3200K) (3200K)

Lumens (per/m) Daylight White - 900 Cool White - 900 Warm White - 900 Transformer 12V

Maximum run 4 meters

* If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.27

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.13

LED Lighting

•

DIM

LED Lighting LED Strip Lights

Options MTM

• • • • • •

PROFILE

DIM

DOOR

HAND

PIR

Offers high brightness with a continuous glow Provides a no dotting effect when used with an LED profile Plug & Play installation Cuttable in 30mm increments Self-adhesive peel and stick backing Recommended to be used in conjunction with an LED Profile which assists with heat dissipation & ensures longevity of the LED diodes

24V 3014 Continuous IP20

MTM-3014 >

Diode Size

3.0mm x 1.4mm

Diodes (per/m)

204

Voltage

24V DC

Energy (watts)

16.3 per/m

Width

10mm

Projection

3mm

Viewing Angle

120°

Waterproof Rating

IP20

Dimmable

Yes

Warm White (3200k)

Item number

Cool White (6000k)

Technical and mounting details

Daylight White (4000k)

WARM WHITE COOL WHITE WARM WHITE (6000K) (3200K) (3200K)

Lumens (per/m) 1590 to 2040 Transformer 24V

Maximum run 5 meters

* If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.27

10.14

LED Lighting LED Strip Lights

Options MTM

• •

•

24V 5050 RGBW Multicolour

(6000K)

(3200K)

Multicolour

(3200K)

Technical and mounting details

PROFILE

Recommended for decorative feature lighting Cuttable in 170mm increments Produces an array of dazzling effects with 20 different mode settings Alternates between all LED colours, including Cool White Memory function - previous setting will be resumed when powered on again Recommended to be used in conjunction with an LED profile which assists with heat dissipation & ensures longevity of the LED diodes

Item number

MTM-5050 >

RGBW

Diode Size

5.0mm x 5.0mm

Diodes (per/m)

Voltage

24V DC

Energy (watts)

10 per/m

Width

10mm

Projection

3mm

Viewing Angle

120°

Waterproof Rating

IP20

Dimmable

Yes

Lumens (per/m) 700 Transformer 24V

Maximum run 5 meters

To be used in conjunction with RGBW Multicolour Controller. > see page 10.18

* If using the strip light in conjunction with a sensor or controller refer to capacity guide > see page 10.27

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.15

LED Lighting

•

LED Lighting LED Strip Lights • • •

Colour Temperature Tuneable Strip Light

Plug & Play installation Adjust colour temperature to suit different rooms and moods One product for a variety of applications

Item number

Description

DIY-3527-WW/CW

5m roll of 3527-WW/CW

MTM-3527-WW/CW

Cut to size 3527-WW/CW

Note: Travels from approx. 3000k to approx. 6000k Compatible with Tuneable Colour Temperature Remote Panel > see page 10.30 To order MB Profiles, please add ‘-MB’ to the end of MTM codes. For further information on ordering > see page 10.19

MTM

As a helpful guide when ordering refer to the Made to Measure order form.

DIY

All DIY components are supplied separately and are recommended for strip light only options (no profile). Available in a 5 meter roll & includes a tail soldered on each end.

10.16

Diode Size

3.5mm x 2.7mm

Diodes (per/m)

120

Voltage

24V DC

Energy (watts)

19.2 per/m

Width

10mm

Projection

3mm

Viewing Angle

120°

Dimmable

Yes

Colour Temperature Changeable

Yes

Lumens (per/m)

840 + 960

Transformer 24V

Max. 4.5m

Cuttable Increments

Every 50mm

IP Rating

IP 20

LED Lighting LED Strip Lights •

Used to activate the RGBW 5050 multicolour strip light Controller is supplied separately to the strip light

LED Lighting

•

Technical and mounting details

RGBW Multicolour Controller

Item number

RGBW-CCU-KIT Includes: remote, batteries, wall mount bracket

REMOTE Size

110 x 52 x 20

Power

AAA Batteries 2pcs

Size

85 x 45 x 23

Working Voltage 24V CONTROLLER Control Way

RGBW

Max Load

144 watts

Control Distance 30 meters

Used to activate and control the RGBW Multicolour Strip Light. > see page 10.16

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.17

LED Lighting LED Profiles Features LED lighting is an extremely effective design tool which can be used to transform and enhance a space. Stefano Orlati lighting offers both functional and decorative applications â&#x20AC;&#x201C; with its key roles being task & mood lighting. There are so many clever ways to incorporate LED lighting into an interior scheme. In the kitchen, the addition of under-cabinetry lighting can enhance & open up a space. In the bathroom practical lighting can be incorporated such as ensuring the mirror is well lit or using a dimmer to control the brightness and mood of the space. Using strip lights or downlights in an open shelf or an entertainment unit is a great accent lighting option which can elevate & highlight the space. LED lighting is safe, environmentally friendly & contains no toxic mercury. It uses approx. 85% less energy than halogen or incandescent lights. Ordering Use the table below as a reference guide for strip lights colours and options. PROFILE OPTIONS Profile Option

Code

Profile Option

Code

DIY Corner

CORNER

DIY Micro

MICRO

MTM Corner

CRN

MTM Micro

MIC

DIY & MTM Slimline

SLIM

DIY & MTM Square

DIFFUSER OPTIONS Diffuser Option

Code

Diffuser Option

Code

Clear

Opaque

Strip Light Option/Colour

Code

3528 Daylight White 3528 Cool White

STRIP LIGHT OPTIONS / COLOURS Strip Light Option/Colour

Code

3528-DW

5050 Daylight White

5050-DW

3528-CW

5050 Cool White

5050-CW

3528 Warm White

3528-WW

5050 Warm White

5050-WW

3528 Amber

3528-AMBER

3014 Daylight White

3014-DW

3528 Blue

3528-BLUE

3014 Cool White

3014-CW

3528 Green

3528-GREEN

3014 Warm White

3014-WW

3528 Red

3528-RED

5050 RGBW Multicolour

5050-RGBW

Tuneable Strip Light

3527-WW/CW

Profile Colour

Code

Note: Default profile colour is Foggy Silver. To order Matt Black profiles,

Matt Black

please add "-MB" to the end of code string as per example below.

PROFILE COLOUR (OPTIONAL)

MTM When ordering Made to Measure lighting, please order using the following code string, for example: Made to Measure MTM | Profile & Diffuser Option SLIM-OP | Strip Light Option / Colour 3528-CW | MB (optional) CODE: MTM-SLIM-OP-3528-CW-MB DIY All DIY codes are specified on each product. When ordering DIY LED Profiles please order using the following code string, for example:[SPECIFY QUANTITY] CODE: DIY-SLIM-OP-MB (MB is optional) Lighting Product Warranty All Stefano Orlati lighting products offer you the warranties extended to you under consumer protection legislation. Our warranty is for one year from the date of purchase. The warranty is void if the lighting products are used with a transformer sourced from another supplier.

10.18

LED Lighting LED Profile • • •

LED Lighting

•

Recess mount installation Supplied with an opaque or clear diffuser Profile can be screwed or glued into rebate Recess depth 6.2mm

Technical and mounting details

Matt Black LED Slimline

Item number

Description

MTM-SLIM-CL [Insert strip light option and colour - refer to table on page 10.19]-MB MTM-SLIM-OP [Insert strip light option and colour - refer to table on page 10.19]-MB 23.6mm 8.5mm

6.2mm

DIY-SLIM-CL-MB

Clear Diffuser

DIY-SLIM-OP-MB

Opaque Diffuser

17.7mm

MTM

All Made to Measure orders are fabricated by us to your measurements. The profile includes diffuser, end caps, mounting clips (if applicable) & LED Strip Light option.

DIY

Choose your required LED components. All DIY components are supplied separately.

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.19

LED Lighting LED Profiles • • • •

Technical and mounting details

LED Slimline

Recess mount installation Supplied with an opaque or clear diffuser Profile can be screwed or glued into rebate Recess depth 6.2mm

Item number

Description

MTM-SLIM-CL [Insert strip light option and colour - refer to table on page 10.19] MTM-SLIM-OP [Insert strip light option and colour - refer to table on page 10.19] 23.6mm 8.5mm

6.2mm 17.7mm

MTM

As a helpful guide when ordering refer to the Made to Measure order form.

DIY

Supplied in a 2m length & includes end caps. All DIY components are supplied separately. * Note: DIY connectors do no fit into the Slimline Profile.

10.20

DIY-SLIM-CL

Clear Diffuser

DIY-SLIM-OP

Opaque Diffuser

LED Lighting LED Profiles • • •

LED Lighting

•

Surface mount installation Supplied with an opaque or clear diffuser Top or side fixing Profile can be screwed on, glued or clipped on using mounting clips

Technical and mounting details

Matt Black LED Corner

Item number

Description

MTM-CRN-CL [Insert strip light option and colour - refer to table on page 10.19]-MB MTM-CRN-OP [Insert strip light option and colour - refer to table on page 10.19]-MB 18mm

DIY-CORNER-CL-MB

Clear Diffuser

DIY-CORNER-OP-MB

Opaque Diffuser

18mm

MTM

All Made to Measure orders are fabricated by us to your measurements. The profile includes diffuser, end caps, mounting clips (if applicable) & LED Strip Light option.

DIY

Choose your required LED components. All DIY components are supplied separately.

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.21

LED Lighting LED Profiles • • • •

Technical and mounting details

LED Corner

Surface mount installation Supplied with an opaque or clear diffuser Top or side fixing Profile can be screwed on, glued or clipped on using mounting clips

Item number

Description

MTM-CORNER-CL [Insert strip light option and colour refer to table on page 10.19] MTM-CORNER-OP [Insert strip light option and colour refer to table on page 10.19] 18mm

18mm

MTM

As a helpful guide when ordering refer to the Made to Measure order form.

DIY

Supplied in a 2m length & includes end caps and mounting clips. All DIY components are supplied separately.

10.22

DIY-CORNER-CL

Clear Diffuser

DIY-CORNER-OP

Opaque Diffuser

LED Lighting LED Profiles • • •

LED Lighting

•

Surface or recess mount installation Supplied with an opaque or clear diffuser Profile can be glued, screwed or clipped on using mounting clips supplied Recess depth 7mm

Technical and mounting details

Matt Black LED Micro

Item number

Description

MTM-MIC-CL [Insert strip light option and colour - refer to table on page 10.19]-MB MTM-MIC-OP [Insert strip light option and colour - refer to table on page 10.19]-MB DIY-MICRO-CL-MB

Clear Diffuser

DIY-MICRO-OP-MB

Opaque Diffuser

MTM

All Made to Measure orders are fabricated by us to your measure-ments. The profile includes diffuser, end caps, mounting clips (if applicable) & LED Strip Light option.

DIY

Choose your required LED components. All DIY components are supplied separately.

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.23

LED Lighting LED Profiles • • •

•

Technical and mounting details

LED Micro

Surface or recess mount installation Supplied with an opaque or clear diffuser Profile can be glued, screwed or clipped on using mounting clips supplied Recess depth 7mm

Item number

Description

MTM-MICRO-CL [Insert strip light option and colour refer to table on page 10.19] MTM-MICRO-OP [Insert strip light option and colour refer to table on page 10.19]

MTM

As a helpful guide when ordering refer to the Made to Measure order form.

DIY

Supplied in a 2m length & includes end caps and mounting clips. All DIY components are supplied separately. * Note: DIY connectors do no fit into the Micro Profile.

10.24

DIY-MICRO-CL

Clear Diffuser

DIY-MICRO-OP

Opaque Diffuser

LED Lighting LED Profiles • • •

LED Lighting

•

Surface or recess mount installation Supplied with an opaque or clear diffuser Profile can be glued, screwed or clipped on using mounting clips supplied Recess depth 10mm

Technical and mounting details

Matt Black LED Square Fusion

Item number

Description

MTM-SQ-CL [Insert strip light option and colour - refer to table on page 10.19]-MB MTM-SQ-OP [Insert strip light option and colour - refer to table on page 10.19]-MB DIY-SQ-CL-MB

Clear Diffuser

DIY-SQ-OP-MB

Opaque Diffuser

MTM

All Made to Measure orders are fabricated by us to your measure-ments. The profile includes diffuser, end caps, mounting clips (if applicable) & LED Strip Light option.

DIY

Choose your required LED components. All DIY components are supplied separately.

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.25

LED Lighting LED Profiles • • •

•

Technical and mounting details

LED Square Fusion

Surface or recess mount installation Supplied with an opaque or clear diffuser Profile can be glued, screwed or clipped on using mounting clips supplied Recess depth 10mm

Item number

Description

MTM-SQ-CL [Insert strip light option and colour - refer to table on page 10.19] MTM-SQ-OP [Insert strip light option and colour - refer to table on page 10.19]

MTM

As a helpful guide when ordering refer to the Made to Measure order form.

DIY

Supplied in a 2m length & includes end caps and mounting clips. All DIY components are supplied separately. *Note: DIY connectors do not fit into the Square Profile.

10.26

DIY-SQ-CL

Clear Diffuser

DIY-SQ-OP

Opaque Diffuser

LED Lighting LED Profiles • • •

LED Lighting

•

Material - aluminium Supplied with an opaque diffuse Middle support brackets & end caps available Can be supplied as a hang rail option only (without strip light)

Technical and mounting details

LED Wardrobe Rail Light

Item number

Description

MTM-ROBE [Insert strip light option and colour - refer to table on page 10.19] ROBE

ROBE-EB

End Bracket

ROBE-MB

Middle Bracket

30.0

DIY >

14.6

MTM

As a helpful guide when ordering refer to the Made to Measure order form.

DIY

Supplied in a 2m length & includes end caps. All DIY components are supplied separately. *Note: DIY connectors do not fit into the Wardrobe Profile.

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.27

LED Lighting LED Profiles • • •

Technical and mounting details

LED Glass Profile

Supplied to fit 8mm glass (glass not included) Best suited for glass with an opaque front edge Recommended to be used with 3528 standard strip light options

Item number

MTM-GLASS [Insert strip light option and colour - refer to table on page 10.19] DIY > 8mm 8mm

MTM

As a helpful guide when ordering refer to the Made to Measure order form.

DIY

Supplied in a 2m length. All DIY components are supplied separately. *Note: DIY connectors do not fit into the Glass Profile.

10.28

Description

GLASS

LED Lighting LED Sensors

DOOR

• • •

LED Lighting

•

Colour - White Plug & Play installation Open and close door to activate and deactivate Compatible with Imperia downlight, 3528 & 3014 strip light options

Technical and mounting details

Door Sensor

18.5 7.5

23.0

Sensor

Description

SS-D-SINGLE

Single Sensor

SS-D-DOUBLE

Double Sensor

Detection Area

Approx. detection 100mm

Input

DC 12V or DC 24V constant voltage

Output

DC 12V or DC 24V

Loading Power

24W or 48W

Mounting

Surface

65.0

Controller Box

Item number

9.0 13.0

* For sensor switch capacity guide See page > 10.27

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.29

LED Lighting LED Sensors • • •

•

Technical and mounting details

Hand Sensor

30.0

Colour - White Plug & Play installation Wave hand within detection range to activate and deactivate Compatible with Imperia downlight, 3528 & 3014 strip light options

Item number

Description

SS-H

Single Sensor

Detection Area

Approx. detection 100mm

Input

DC 12V or DC 24V constant voltage

Output

DC 12V or DC 24V

Loading Power

24W or 48W

Mounting

Surface or recess

Recess Depth

14mm

Specifications: Specifications:

20.0

16mm

15.0

Product ProductName: Name:Movement MovementSensor SensorSwitch Switch Recess Product Productdescription: description:This ThisMovement MovementSensor SensorSwitch Switchisisan anexclusively exclusivelydesign designfor forClass ClassIIIDiameter IIIinsulation insulationappliance. appliance. Function Functiondescription: description:when whenthe thetarget targetobject objectisisininthe thedetecting detectingrange rangeone onetime, time,the thelamp lampswitches switcheson on(off), (off), Surface Mount when whenthe thetarget target objects objectsisisininthe thedetecting detectingrange rangesecond secondtime, time,the thelamp lampwill willbe beswitch switchoff(on). off(on). Measurement WW oo rkriknin ggVV oo lta lta gg ee

DD CC 11 22 VV

DD CC 22 44 VV

MM aa xixm im uu mmLL oo aa dd

22 44 WW

44 88 WW

QQ uu ieie scse ce nn t tCC uu rrrere nn tt

66 mm AA

Working WorkingTemperature Temperature

00 -20 -20——+45 +45 CC

EE ffe ffe ctcivtie veRR aa nn gg ee

<< 11 55 CC MM

Installation InstallationInstructions: Instructions: 1.1.As Asshown shown

Recessed mount

Surface mount

<10cm <10cm

Recess depth 14mm

* For sensor switch capacity guide See page > 10.27

10.30

LED Sensors

HAND

LED Lighting LED Sensors

PIR

• • •

LED Lighting

•

Colour - White Plug & Play installation Move in and out of detection range to activate and deactivate Compatible with Imperia downlight, 3528 & 3014 strip light options

Technical and mounting details

Description

SS-PIR-SINGLE

Single Sensor

SS-PIR-DOUBLE

Double Sensor

Detection Area

Approx. detection 1m

Input

DC 12V or DC 24V constant voltage

Output

DC 12V or DC 24V

Loading Power

24W or 48W

Mounting

Surface or recess

Recess Depth

11mm

Recess Diameter

16mm

9.0

20.0

PIR Sensor

Item number

WoW W rkooirnrkkgiinnVggoV V lto aolglttae aggee

DCD D1C C 21V 122V V

MaM M xa iam m muum L moLa Lod oaadd xxiuim

242W 244W W

QuQ Q ieuusiie cee sscncetenC nttuC C rruuerrnrretenntt

0.600m ..66Am mA A

DCD D2C C 42V 244V V

21.0

484W 488W W

0.600m ..66Am mA A Controller Box

0 00 -20-20 -20 —— — +45 +45 +45 CC C

Working Working Working Temperature Temperature Temperature

0 00 -20-20 -20 —— — +45 +45 +45 CC C

EffE E efcfffe teivcce ttiivvR eeaR R nag ane nggee

<1<< .511M ..55M M

Detection Detection Detection Angle Angle Angle

o oo 110 110 110

111 011o100oo

DeD D laeeyllaaTyyim T Tieim mee

454s455ss

Recessed mount Detection Detection Detection Area Area Area

13.0

Surface Mount Measurement

Specifications: Specifications: Specifications:

30.0

Product Product Product Name: Name: Name: 96638/96638B 96638/96638B 96638/96638B PIR PIR PIR Sensor Sensor Sensor Switch Switch Switch Product Product Product description: description: description: This This This type type type of of PIR of PIR PIR sensor sensor sensor switch switch switch is an is is an an exclusively exclusively exclusively design design design forfor for class class class III III insulation III insulation insulation appliance. appliance. appliance. Function Function Function description: description: description: When When When detected detected detected thethe the human human human body body body move move move within within within thethe the detection detection detection range, range, range, thethe the switch switch switch willwill will turn turn turn on,on, on, 65.0 when when when thethe the body body body leftleft left thethe the detection detection detection range range range forfor for 45s, 45s, 45s, thethe the switch switch switch willwill will turn turn turn offoff off automatically. automatically. automatically.

Surface mount

ø16 ø16 ø16

<1m <1m

Recess depth 11mm

* For sensor switch capacity guide See page > 10.27

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.31

LED Lighting LED Sensors

• • • •

LED Sensors

•

Plug & Play installation On/Off switch function Activated by touch Compatible with Imperia Downlight and 3528 & 3014 strip light options Silver colour

Technical and mounting details

Touch Dimmer

ø 30.5

Surface Mount

Item number

Description

SS-DIM

Touch Dimmer

Input voltage

DC 12V/24V

Output voltage

DC 12V/24V

Loading Power

24W/48W

IP Rated

IP44

Recess Depth

14mm

Recess Diameter

24mm

Detection Area

By touch

Mounting

Surface or recess mount

16.0

ø 24

Recess Mount

ø 10 mm hole

Installation

10.32

* For sensor dimmer control guide See page > 10.27

LED Lighting LED Sensors

DIM

• • • •

LED Lighting

•

Colour - White Plug & Play installation On/Off switch function Dimmer control includes – controller, remote/batteries & mounting bracket for remote Compatible with Imperia downlight, 3528, 3014 & 5050 strip light options

Technical and mounting details

Dimmer Controller

Item number

Description

LED-DIM-KIT

Dimmer Controller

Includes: remote, batteries, wall mount bracket and DIY tail.

RF Touch Remote

2.4 GHz

Receiving Range

30 meters

Input

DC 12V or DC 24V constant voltage

Output

DC 12V or DC 24V

Loading Power

60W (12V) or 120W (24V)

Dimensions of Control Box

85mm x 45mm x 22mm

Dimensions of Remote

114mm x 56mm x 20mm

* For sensor dimmer control guide see page > 10.27 Sensor Capacity Guide Hand Sensor / Door Sensor / PIR Sensor / Touch Dimmer Product

Capacity (maximum run)

12V - Imperia Downlights

4 x downlights (including 2m tail leading to transformer)

12V - 3528 Standard Strip Light

4.0 metres (including 2m tail leading to transformer)

12V - 5050 Extra Bright Strip Light

1.5 meters (including 2m tail leading to transformer)

24V - 3014 Continuous Strip Light

2.0 meters (including 2m tail leading to transformer)

Dimmer Control Product

Capacity (maximum run)

12V - Imperia Downlights

6 x downlights (including 2m tail leading to transformer)

12V - 3528 Standard Strip Light

10 metres (including 2m tail leading to transformer)

12V - 5050 Extra Bright Strip Light

4.0 meters (including 2m tail leading to transformer)

24V - 3014 Continuous Strip Light

5.0 meters (including 2m tail leading to transformer)

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.33

LED Lighting LED Sensors • • • •

LED Sensors

•

App smart phone long distance controller Timer function Easy linking and operating Compatible with iOS (App Store) and Android (Google Play) User interface on your phone

Item number

Wi-Fi Controller

10.34

WIFI-CU-V2

LED Lighting

LED Lighting Lighting Panels & Controllers

Dimmer Remote Panel & Controller Box

Item number

Description

612.8S07.100.001

Panel

612.8S07.101.001

Controller Box

Note: Can be wall-mounted or used as a hand held device.

• • • • • • • • • •

4-way multi-channel Brightness dimmer 60 sec. switch off delay Sensitive touch Scratch resistant 2.4G 30m distance control Wireless Battery operated (2 x AAA) Compatible with all single colour Strip Lights

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.35

LED Sensors

LED Lighting Lighting Panels & Controllers

Tuneable Colour Temperature Remote Panel & Controller Box

Item number

Description

612.8S07.100.002

Panel

612.8S07.101.002

Controller Box

Note: Can be wall-mounted or used as a hand held device.

• • • • • • • • • • •

10.36

4-way multi-channel Brightness dimmer Colour temperature change 60 sec. switch off delay Sensitive touch Scratch resistant 2.4G 30m distance control Wireless Battery operated (2 x AAA) Compatible with 3527-WW/CW

LED Lighting

LED Lighting Lighting Panels & Controllers

RGBW and Dimmer Remote Panel & Controller Box

Item number

Description

612.8S07.100.003

Panel

612.8S07.101.003

Controller Box

Note: Can be wall-mounted or used as a hand held device.

• • • • • • • • • • • • •

4-way multi-channel Brightness dimmer RGB/RGBW change Sensitive touch Scratch resistant 2.4G 30m distance control White channel Speed change 9 colour changing modes Wireless Battery operated (2 x AAA) Compatible with 5050-RGBW

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.37

LED Lighting LED DIY & Accessories • • •

DIY Connector

Compatible with 3528 standard strip light only Connector dimensions - (L) 16mm x (W) 12mm DIY components are recommended for strip light only options (no profile)

Item number

Length (Mtr)

DIY-CONNECT

N/A

Note: Connectors are not recommended for use with LED profiles.

DIY Tail

DIY-TAIL

Note: Connectors are not recommended for use with LED profiles.

10.38

LED Lighting LED DIY & Accessories Compatible with 3528 standard strip light only Connector dimensions – (L) 16mm x (W) 12mm DIY components are recommended for strip light only options (no profile)

• •

LED Lighting

•

DIY Corner Connector

Item number

Length (Mtr)

DIY-CORNER

N/A

•

40mm wire between connectors

Note: Connectors are not recommended for use with LED profiles.

Extension Cable

DIY-EXT

2m extension lead can be used with LED Downlights and LED strip lights (except RGBW-strip lights)

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.39

LED Lighting LED DIY & Accessories

Toggle Switch

Item number

Description

SS-TOGGLE

Single Switch

Input

DC 12V or DC 24V Continuous

Output Loading

DC 12V or DC 24V

Power Mounting

Max. 72W for 12V and Max.

Recess Diameter

144W for 24V Recess 20mm

10.40

LED Lighting LED Transformers •

•

LED Lighting

•

Protections - short circuit / overload / over voltage / over temperature Option of 25W or 60W depending on application requirements – see LED compatibility All transformers are supplied with a 6-way junction box

12V-25W Transformer

Item number

Description

TF-25-12

12V-24W Transformer

AC Input Voltage

100-240VAC - 50/60Hz , 1.0A Max

DC Output

12V DC 2.08A Constant Voltage

Output Watts Max

25 Watts

Dimensions

(L) 100mm (W) 47mm (H) 27mm

Power Input Cord

1.5m

LED Compatibility

Imperia downlight, 3528 standard strip light, Sensor switches

Transformer Capacity Guide 12V-25W Transformer LED Downlights/Strip lights

Per 25W Transformer (no sensors attached)

Imperia downlight

6 x downlights (including 2m tail leading to transformer)

3528 Standard strip light

5.0 meters (including 2m tail leading to transformer)

5050 Extra bright

1.5 meters (including 2m tail leading to transformer)

Refer to sensor and controller capacity guide, See page > 10.27

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.41

LED Lighting LED Transformers •

•

12V-60W Transformer

Item number

Description

TF-60-12

12V-60W Transformer

AC Input Voltage

100-240VAC - 50/60Hz 1.5A Max

DC Output

12VDC 5.0A Constant Voltage

Output Watts Max

60 Watts

Dimensions

(L) 117mm (W) 51mm (H) 35mm

Power Input Cord

1.5m

LED Compatibility

3528 Standard, 5050 Extra bright

Transformer Capacity Guide 12V-60W Transformer LED Strip lights

Per 60W Transformer (no sensors attached)

3528 Standard strip light

10 meters (including 2m tail leading to transformer)

5050 Extra bright strip light

4.0 meters (including 2m tail leading to transformer)

Refer to sensor and controller capacity guide, See page > 10.27

10.42

LED Lighting LED Transformers •

LED Lighting

•

Protections – short circuit / overload / over voltage / over temperature All Transformers are supplied with a 6-Way Junction Box

Item number

Description

TF-60-24

24V-60W Transformer

24V-60W Transformer AC Input Voltage

110-240VAC, 50/60Hz, 1.4A

DC Output

24V DC 2.50A Constant Voltage

Output Watts Max

60 Watts

Dimensions

(L) 125mm (W) 50mm (H) 31.5mm

Power Input Cord

1.5m

LED Compatibility

3014 continuous & 5050 RGBW Multicolour strip light options

Transformer Capacity Guide 24V-60W Transformer LED Strip lights

Per 60W Transformer (no sensors attached)

3014 Continuous strip light

3.5 meters (including 2m tail leading to transformer)

5050 RGBW Multicolour strip light

4.0 meters (including 2m tail leading to transformer)

Refer to sensor and controller capacity guide, See page > 10.27

Download supporting documentation from the Titus Tekform website titustekform.com.au

10.43

LED Lighting LED Transformers •

•

24V-90W Transformer

Protections – short circuit / overload / over voltage / over temperature All Transformers are supplied with a 6-Way Junction Box

Item number

Description

TF-90-24

24V-90W Transformer

AC Input Voltage

110-240VAC, 50/60Hz, 1.4A

DC Output

24V DC 3.75A Constant Voltage

Output Watts Max

90 Watts

Dimensions

(L) 150mm (W) 60mm (H) 33mm

Power Input Cord

1.5m

LED Compatibility

3014 continuous & 5050 RGBW Multicolour strip light options

Transformer Capacity Guide 24V-90W Transformer LED Strip lights

Per 90W Transformer (no sensors attached)

3014 Continuous strip light

5.0 meters (including 2m tail leading to transformer)

5050 RGBW Multicolour strip light

5.0 meters (including 2m tail leading to transformer)

Refer to Sensor and Controller Capacity Guide, See page > 10.27

10.44

Sinkware & Tapware

Sinkware & Appliances

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.2

Sinkware and Appliances Product Guide

Tekform Sinkware Page

Information

11.4

Ergonomic Christchurch Range

11.6

Hand Fabricated Coloured (PVD) Range

11.9

Hand Fabricated Range

11.10

Composite Sink Range

11.11

Designer Butler Range

11.12

Everglades Range

11.13

Bowl & Drainer Range

11.15

Ergonomic Laundry Range

11.17

TradePro Sink & Tap

11.18

Sinkware Accessories

11.19

Tekform Tapware

11.2

Basin Mixers

11.23

Sink Mixers

11.24

High Rise Sink Mixers

11.25

Kitchen & Laundry Appliances Information

11.30

Upright Cooker

11.31

Built-in Ovens

11.32

Compacts

11.36

Microwaves

11.39

Cooktops

11.40

Rangehoods

11.48

Dishwashers

11.57

Refrigeration

11.59

Outdoor Appliances

11.61

Washing Machines

11.62

Clothes Dryers

11.63

DOMUS Ducting Information

11.64

Wall Outlets

11.66

SuperTube 125

11.67

EasiPipe

11.69

System Parts and Flexible Hoses

11.71

Pipe and Hose Accessories

11.73

Modular Kits

11.75

11.3

Tekform Sinkware

About your Tekform Sinkware Stainless Steel Grade

Stainless steel is very hygienic and easy to clean, making it ideal for food preparation.

The regular steel grade is 304. Many Tekform sinks are available in the higher 316 marine grade steel.

Seamless Pressed Method

The superior finish of sinkware drawn from one solid plate takes skill and years of understanding the art of stainless steel.

Mercer, the manufacturer of Tekform sinks by Titus delivers this for you from their dedicated sinkware plant in Christchurch. Craftsmen with many combined years of experience produce your sinkware with care.

Radius

This is the measurement of the bowl curves. Tight radius bowls are squarer in shape, for a modern look. However the larger radius bowls are easier to clean and maintain.

Sink Edge

For TopMount installations, the lip around the bowl can protect the high wear edge of your benchtop.

Size

Smaller bowls conserve water and bench space and are great for rinsing. Larger bowls will accommodate bigger dishes and trays.

Depth

Shallow bowls are perfect for food preparation and as an effective drainer. They leave plenty of room for underlying cabinetry and a great place to sit a dishrack.

Waste Location

The waste is often located towards the back of the sink to provide you with maximum storage space in the front of your kitchen cabinet.

Hand Welded Method (WI)

Also available in the range are entry level welded products. Still with the style and functionality you are looking for. Look for the 'Weld In' icon.

Edge Profile

There are a variety of edge profiles available. Rolled super-safe edges are robust and have no sharp edges, the flat profile chamfered edges on the Tekform pressed top-mount bowls are safe and unobtrusive with a tight fit to the bench surface. Chamfered edges create an easy to wipe with EzyWipe connection from the bench to the bowl.

11.4

Look out for these icons A quick and easy way for you to understand which sink is right for your needs.

Note: UnderMount templates and CAD files are a guide only, we strongly recommend test cut-outs and check against actual bowls before installation.

Supplier Information and Warranty Manufacture & Supply Partner

Titus Tekform's sinkware collection brings to the Australian market a unique range of products sourced and manufactured by our partner Mercer, from their modern pressing plant located in Christchurch, New Zealand.

Mercer brings major point of difference to the Sinkware market in Australia through Tekform by Titus, offering customers a variety of sinkware options for residential and industrial applications.

Mercer History

The original Mercer Company was established in 1884 by Mr James Mercer in Christchurch, New Zealand. James Mercer laid the foundations for the future with techniques in Copper-smithing, Metalworking and founderâ&#x20AC;&#x2122;s hammer and forging.

Today, with over 130 years in operation, the modern facility has world standard deepdrawn tight radius pressing equipment, robotic polishing and annealing; which allows Mercerâ&#x20AC;&#x2122;s long-term skilled employees to craft a range of uniformed deep-drawn stainless steel sinkware. Mercer is now part of the Acero Group and their full range of products can be viewed by visiting www.acero.co.nz

Product Disclaimer

As the Mercer policy is one of continual improvement, the manufacturers reserve the right to vary specifications or delete models from their range without prior notification.

Always use the physical product measurements for cut-outs as the manufacturerâ&#x20AC;&#x2122;s template is a guide only and may differ from the actual product dimensions over time. The manufacturers take no responsibility for printing errors.

Product Warranty

The Tekform by Titus range of stainless steel sinkware products carry a 25 year warranty for domestic application. Ceramic Butler sinks carry a 5 year warranty for domestic application. For information on commercial application warranties, speak to your sales representative.

Titus Tekform will rectify any genuine manufacturing fault found with any Tekform Sink by Titus during normal use. Please note that this warranty does not cover scratching or normal wear and tear, as these are not manufacturing faults.

Installation Reminder

Tekform sinkware can be installed in a variety Ceramic products in particular are to be fitted of styles including TopMount and UnderMount. by specialist cabinet makers with the skills in It is important to remember that all installations fitting this type of sink design. are to be carried out by trained cabinet makers familiar with the procedures involved.

Need more technical information?

Log onto titustekform.com.au/products/kitchen-appliances/sinkware for specific product data sheets, care and maintenance information and product warranty details.

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.5

Sinkware & Tapware

Tekform Sinkware

• • • •

Technical details and dimensions

1/2 Bowl

260mm 230mm

Capacity (L)

•

Made in New Zealand 90mm round basket waste included 0.9mm, 304 grade stainless steel 15mm low profile EzyWipe flange Classic finish 50mm corner radius 25 year warranty

Depth (mm)

•

Width (mm)

•

Length (mm)

Tekform Sinkware Ergonomic Christchurch (EC) Range

Item number

260

315

150

604.8E16.022.000

• •

Reversible 300mm minimum cabinet size

315 285 mm

150mm deep

3/4 Bowl

335 335 mm 305 mm

• •

335

170

604.8E18.022.000

Reversible 350mm minimum cabinet size

335 305 mm

170mm deep

Medium Bowl

385 mm 355 mm

385 • •

335

170

604.8E02.022.000

Reversible 400mm minimum cabinet size

335 305 mm

170mm deep

Main Bowl

440 440 mm 410 mm

• •

385 355 mm

170mm deep

Accessories for EC Sinkware > See page 11.19

11.6

385

170

Reversible 450mm minimum cabinet size

604.8E08.022.000

Capacity (L)

540 mm 510 mm

Depth (mm)

Maxi Bowl

Width (mm)

Technical details and dimensions

Length (mm)

Sinkware & Tapware

Tekform Sinkware Ergonomic Christchurch (EC) Range

Item number

540

385

180

604.8E20.022.000

• •

385 355 mm

Reversible 550mm minimum cabinet size

180mm deep

Main Bowl & Medium Bowl

775

775mm

•

385 355 mm

•

410

385

170

22/17

604.8E22.022.000

Reversible 800mm minimum cabinet size

305

170mm deep

Double Main Bowls

770

770mm

•

440 mm

440

170

22/22

604.8E12.022.000

800mm minimum cabinet size

410 mm

355

170mm deep

Main Bowl & 3/4 Bowl

RH Small Bowl 720

440

170

22/14

604.8E24.022.010

LH Small Bowl 720

440

170

14/22

604.8E24.022.020

720mm •

440 mm

750mm minimum cabinet size

410 mm

305 335 mm

355 mm

170mm deep

305m m

170mm deep

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.7

Tekform Sinkware Ergonomic Christchurch (EC) Range

• • • • • •

Width (mm)

Depth (mm)

Capacity (L)

Length (mm)

•

Item number

RH Small Bowl 685

440

170

22/8L

604.8E21.022.100

LH Small Bowl 685

440

170

8/22L

604.8E21.022.200

Technical details and dimensions

Main Bowl and 1/2 Bowl

Made in New Zealand 90mm round basket waste included 0.9mm, 304 grade stainless steel 15mm low profile EzyWipe flange Classic finish 50mm corner radius 25 year warranty

•

685mm

440 mm

410 mm

270 mm

170mm deep

Accessories for EC Sinkware > See page 11.19

11.8

355 mm

700mm minimum cabinet size

• • •

Technical details and dimensions

Gun Metal

400

Item number

450

200

604.8I40.022.005

550

450

200

604.8I42.022.005

400

450

•

Matching grid included Colour-matched taps available > see page 11.25

450 mm

200mm deep

Brass 400 mm

450

200

604.8I40.022.006

550

450

200

604.8I42.022.006

•

400

450

•

Matching grid included Colour-matched taps available > see page 11.25

450 mm

200mm deep

Copper

500

450

200

604.8I40.022.007

550

450

200

604.8I42.022.007

• •

Matching grid included Colour-matched taps available > see page 11.25

400

450

550 mm

200mm deep

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.9

Sinkware & Tapware

•

Capacity (L)

•

Depth (mm)

•

Coloured using superior liquid-free Physical Vapour Deposition (PVD) 90mm colour-matched round basket waste included 1.2mm, 304 grade stainless steel 25mm flat flange Main bowl overflow 10mm corner radius 25 year warranty

Width (mm)

•

Length (mm)

Tekform Sinkware Hand Fabricated Coloured (PVD) Range

• • • •

Technical details and dimensions

Main Bowl

Capacity (L)

•

90mm round basket waste 1.2mm, 304 grade stainless steel 25mm flat flange Satin finish Main bowl overflow 15mm corner radius 25 year warranty

Depth (mm)

•

Width (mm)

•

Length (mm)

Tekform Sinkware Hand Fabricated (HF) Range

Item number

440

200

604.8I08.022.000

440mm 400mm

•

450mm minimum cabinet size

440mm

400mm

(deep)

200mm

Maxi Bowl

540 540mm 500mm

•

440

200

604.8I20.022.000

550mm minimum cabinet size

440mm

400mm

(deep)

200mm

Medium Bowl & Main Bowl

810 810mm 340mm

•

400mm

440

200

25/30

604.8I22.022.000

850mm minimum cabinet size

440mm

400mm

(deep)

200mm

Medium Bowl & 1/2 Bowl

670 •

670mm

400mm

200mm 440mm

400mm

(deep)

200mm

Accessories for HF Sinkware > See page 11.19

11.10

440

200

30/11

700mm minimum cabinet size

604.8I33.022.000

• • • • •

Technical details and dimensions

Large Bowl 570mm

Item number

570

500

200

604.8J40.022.002

500mm

550mm minimum cabinet size

200mm

400mm

•

500mm

Sinkware & Tapware

•

Capacity (L)

•

Made in Italy 90mm round basket waste with cover 80% granite composite material 35mm flat flange Seamless matt finish Main bowl overflow 10mm corner radius 25 year warranty Tap holes not included

Depth (mm)

•

Width (mm)

•

Length (mm)

Tekform Sinkware Composite Sink (CM) Range

Main Bowl & 1/2 Bowl

815

815mm 460mm

260mm

215

42/21

604.8J28.022.002

800mm minimum cabinet size

190mm

360mm

430mm 215mm

500mm

•

500

765mm

Main Bowl & Drainer

1000

510

200

604.8J32.022.002

1000mm 477mm

457mm •

448mm

Reversible 600mm minimum cabinet size

200mm

510mm

•

Double Main Bowl

860 860mm

•

365mm

31/31

604.8J30.022.002

900mm minimum cabinet size

200mm

510mm

200

448mm

365mm

510

811mm

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.11

• •

Technical details and dimensions

Ceramic Single Bowl

Capacity (L)

•

Hand crafted in the UK from natural ceramic 90mm round basket waste High glaze white finish Main bowl overflow 5 year warranty

Depth (mm)

•

Width (mm)

•

Length (mm)

Tekform Sinkware Designer Butler (DB) Range

Item number

595

475

225

604.8L02.102.000

•

475mm

595mm

• •

225mm (deep)

•

Ceramic Double Bowl

800 •

•

800mm 490mm

• •

220mm (deep)

•

11.12

Ceramic bowls are not designed for a waste disposal Product tapers inward by 12mm from top to bottom on front and sides Ceramic products to be fitted by specialist All tap holes need to be cut by specialist. Tap holes are not included 600mm minimum cabinet size

490

220

28/28

604.8L02.122.000

• • •

Technical details and dimensions

Main Bowl with Drainer

Item number

860

500

200

604.8O30.022.006

• •

Main Bowl and 1/4 Bowl with Drainer

Sinkware & Tapware

•

Capacity (L)

•

90mm round basket waste included 0.8mm, 304 grade stainless steel Silk finish Laser edge 25mm corner radius Main bowl overflow 25 year warranty

Depth (mm)

•

Width (mm)

•

Length (mm)

Tekform Sinkware Everglades (EE) Range

Reversible 450mm minimum cabinet size

RH Drain 1000

500

200/160

28/11

604.8O31.022.206

LH Drain 1000

500

160/200

11/28

604.8O31.022.106

•

650mm minimum cabinet size

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.13

• • • • • •

Depth (mm)

Main Bowl and 3/4 Bowl with Drainer

Width (mm)

Technical details and dimensions

Length (mm)

•

90mm round basket waste included 0.8mm, 304 grade stainless steel Silk finish Laser edge 25mm corner radius Main bowl overflow 25 year warranty

RH Drain 1160

500

200/180 28/18

604.8O34.022.206

LH Drain 1160

500

180/200 18/28

604.8O34.022.106

•

Double Main Bowl with Drainer

11.14

Capacity (L)

Tekform Sinkware Everglades (EE) Range

Item number

750mm minimum cabinet size

1200

500

200/200 28/28

604.8O36.022.006

• • • •

Width (mm)

Depth (mm)

Capacity (L)

•

90mm round basket waste included 0.8mm, 304 grade stainless steel Satin finish Laser edge Main bowl overflow 25 year warranty

Sinkware & Tapware

•

Length (mm)

Tekform Sinkware Bowl and Drainer (BD) Range

Item number

1 Tap Hole 820

500

180

24/24

604.8K12.022.100

No Tap Hole 820

500

180

24/24

604.8K12.022.000

LH Drain 1 Tap Hole 1080

480

170/150

12/20

604.8K24.022.110

RH Drain 1 Tap Hole 1080

480

170/150

20/12

604.8K24.022.120

No Tap Hole 1080

480

170/150

20/12

604.8K24.022.000

No Tap Hole 990

485

170/150

20/8

604.8K28.022.000

Technical details and dimensions

Double Bowls

820mm 355mm

500mm 406mm

355mm

180mm deep bowls

Main Bowl & 3/4 Bowl + Fan Drainer

1080mm 330mm

278mm

278mm 380mm

480mm

170mm deep main bowl 150mm deep small bowl

Main Bowl & 1/2 Bowl + Fan Drainer

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.15

Tekform Sinkware Bowl and Drainer (BD) Range

• • • • •

Width (mm)

Depth (mm)

Capacity (L)

Length (mm)

•

90mm round basket waste included 0.8mm, 304 grade stainless steel Satin finish Laser edge Main bowl overflow 25 year warranty

Item number

LH Drain 1 Tap Hole 1180

480

170

20/20

604.8K36.022.110

RH Drain 1 Tap Hole 1180

480

170

20/20

604.8K36.022.120

No Tap Hole 1180

480

170

20/20

604.8K36.022.000

1 Tap Hole 1380

480

170

20/20

604.8K46.022.000

No Tap Hole 1380

480

170

20/20

604.8K46.022.100

LH Drain 1 Tap Hole 780

480

170

604.8K08.022.110

RH Drain 1 Tap Hole 780

480

170

604.8K08.022.120

No Tap Hole 780

480

170

604.8K08.022.000

Technical details and dimensions

Double Bowls + Fan Drainer

1180mm 330mm

480mm 380mm

330mm

170mm deep bowls

Double Bowls + Double Fan Drainers

1380mm 330mm

380mm

480mm

330mm

170mm deep main bowls

Main Bowl + Fan Drainer

11.16

Tekform Sinkware Ergonomic Laundry (EL) Range

• •

Width (mm)

Depth (mm)

Capacity (L)

Item number

0.8mm SS Bowl Only 560

460

230

604.8N40.022.000

390mm 310mm

No Tap Hole 390

500

200

604.8N43.022.000

600mm 520mm

No Tap Hole 600

500

230

604.8N44.022.000

630

470

220

604.8V44.022.001

Technical details and dimensions

Large Bowl

Length (mm)

Sinkware & Tapware

•

Made in New Zealand 90mm round basket waste included 304 grade stainless steel

560mm 520mm

460 420 mm

230mm deep

Laundry Tub 30L

500 420 mm

200mm deep

Laundry Tub 45L

500 420 mm

230mm deep

Premium Entry Level Laundry Tub

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.17

Tekform Sinkware TradePro Sink & Tap

Technical details and dimensions

TradePro Main Bowl & 3/4 Bowl with Drainer and Mixer Tap

1080

480

170/150 20/11 604.8V52.022.001

• •

1080mm 330mm

278mm 380mm

480mm

170mm deep main bowl 150mm deep small bowl

11.18

278mm

Capacity (L)

•

Depth (mm)

•

Seamless pressed bowls 304 grade stainless steel Sidewall by-pass kit Large bowl kitchen, galley and alfresco applications

Width (mm)

•

Length (mm)

•

Item number

Sink and tap package For sink only > 604.8V52.022.000

Sinkware & Tapware

Tekform Sinkware Accessories

Information Customise

Drainer Trays

Using foodboards, colanders and other

See pages 11.20-11.22

fitted accessories with your sinkware

to mix and match accessories

makes food preparation simple.

with your preferred sink.

Drainer trays give you the option of placing the drainer where it is most convenient. Create bench space and drain wet dishes effortlessly with a drainer tray positioned left, right or fitted over your sink.

Food Preparation

Food boards are perfect for creating more bench space in smaller kitchens. Fit the cutting board over the sink to create a food preparation space.

Washing up

Tekform Sink accessories offer flexibility to your space. Add dishracks suited to your preferred sinks and cleaning up is easy.

DriSeal (DS) Program • • • •

To use with all sinkware without tap landings Protects benchtops from water damage Creates a barrier to spills and leaks Decorative and functional design

DriSeal product images and ordering information can be found under Sink Accessories (SA) > See page 11.22

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.19

Tekform Sinkware Sink Accessories (SA)

Item number

Ergonomic Christchurch Food Board

604.8X62.018.000 •

Hand Fabricated Food Board

604.8X54.143.000 •

Bowl and Drainer Food Board

To suit HF Main Bowls

604.8X54.270.000 •

11.20

To suit EC Main Bowls

To suit BD Main Bowls

Tekform Sinkware Sink Accessories (SA) Tekform Sinkware Accessories by Titus offer you: • • •

Convenience Organisation Flexibility Safety

Sinkware & Tapware

•

Item number

Bowl & Drainer Tray

604.8X60.034.000 •

Ergonomic Christchurch Drainer Tray

604.8X60.032.000 •

Hand Fabricated Drainer Tray

To suit EC Main Bowls

604.8X60.130.000 •

Download supporting documentation from the Titus Tekform website titustekform.com.au

To suit BD Main Bowls

To suit HF Main Bowls

11.21

Tekform Sinkware Sink Accessories (SA) Tekform Sinkware Accessories by Titus offer you: • • • •

Convenience Organisation Flexibility Safety

Item number

Dish Rack S/S (EC & BD Main Bowls)

604.8X62.024.000

Dish Rack S/S (DC & HF Main Bowls)

604.8X62.016.000

DriSeal Round

604.8X64.090.001

DriSeal Square

604.8X64.090.002

11.22

Tekform Tapware Basin Mixers •

40mm Ceramic Cartridge 5 star WELS water rating

Sinkware & Tapware

•

Technical details and dimensions

Square Basin Mixer

Item number

Chrome

604.8F08.001

•

Solid handle

42x42

110

195

110

Finish

Made of brass with chrome Basin Mixer

Chrome

115

Solid handle

117

•

604.8F08.005

ø50

Made of brass with chrome

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.23

Tekform Tapware Sink Mixers • •

40mm Ceramic Cartridge 5 star WELS water rating

Technical details and dimensions

Single Lever Single Mixer

Finish

Item number

Chrome

604.8F07.050

•

Solid handle

220

130

139

10°

ø50

Made of brass with chrome Pull-out Single Lever Sink Mixer

Chrome •

115

162

195

ø50

Made of brass with chrome

11.24

604.8F07.055

Solid handle

Tekform Tapware High Rise Sink Mixers •

35mm Ceramic Cartridge 5 star WELS water rating

Sinkware & Tapware

•

Technical details and dimensions

High Rise Goose Neck Sink Mixer

185

50x50

Item number

Chrome

604.8F07.015

Gun Metal

604.8F07.015.005

Brass

604.8F07.015.006

Copper

604.8F07.015.007

•

Pin handle

110

260

335

Finish

High Rise Square Neck Mixer

Chrome 200 •

604.8F07.020

Pin handle

50 x 50

110

250

335

ø20

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.25

Tekform Tapware High Rise Sink Mixers • •

35mm Ceramic Cartridge 5 star WELS water rating

Technical details and dimensions

Black High Rise Goose Neck Sink Mixer

Finish

Item number

Matt Black

604.8F07.150.002

•

Black High Rise Square Sink Mixer

Matt Black •

11.26

Pin handle

604.8F07.030.002

Tekform Tapware High Rise Sink Mixers •

Sinkware & Tapware

•

35mm Ceramic Cartridge Goose Neck / 40mm Ceramic Cartridge Square 5 star WELS water rating

Technical details and dimensions

High Rise Goose Neck Pull-out Sink Mixer

Finish

Item number

Chrome

604.8F07.025

•

299

481

198

Pull-out Pin handle

Max 30

M33*1.5-6H

High Rise Square Sink Mixer

Chrome 180

•

604.8F07.030

Single Lever handle

Max 25

256

277

136

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.27

Tekform Tapware High Rise Sink Mixer • •

40mm Ceramic Cartridge 5 star WELS water rating

Technical details and dimensions

High Rise Multi-function Sink Mixer

Finish

Item number

Chrome

604.8F07.010

156

681

•

205

Made of brass with chrome

11.28

Pull-out Pin handle

Kitchen Appliances

Kitchen & Appliances Laundry & Ducting Appliances

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.29

Appliances from Titus Tekform

The Brands Teka Appliance Collection Global Solutions for Australian Homes

Founded in 1924, Teka has become the benchmark in European manufacture of built-in home appliances, particularly cooking. Today, Teka boasts more than 30 factories spead across three continents and markets to over 110 countries.

Titus Tekform's partner, Residentia, has worked with Teka's product engineers to design a product range across the Kitchen and Laundry categories specifically to suit the Australian and New Zealand consumer.

InAlto Appliance Collection A Higher Level of Cooking

The InAlto brand was created by Residentia through a singular desire: to establish a premium-level range of kitchen appliances able to deliver a superior cooking experience to Australian consumers.

The Titus Tekform offer was designed to eliminate shortcomings with todayâ&#x20AC;&#x2122;s major brands whilst drawing on European design trends.

Quality Assurance for your Inalto and Teka Appliances from Titus Tekform

The Residentia team are committed to ensuring all products meet and exceed all required standards and approvals and have engaged the services of independent experts both locally and internationally to ensure this is the case.

All manufacturing partners are regularly audited and pre-shipment inspections will also take place. Residentia employs the services of QA inspectors to perform inspections on products throughout the manufacturing process.

Bonus Warranty

Each new InAlto or Teka appliance is now available with a bonus warranty when registered online. A 2 year manufacturer's warranty for Inalto appliances and a 3 year manufacturer's warranty for Teka appliances is automatically applied as standard, from the date of purchase.

Simply register online within 90 days of purchase and Residentia will extend the manufacturer's warranty by 12 months for InAlto products and 24 months for Teka products, free of charge.

2+1 3+2

Claims and Returns

All InAlto appliances purchased from Titus Tekform carry a 24 month supplier warranty. In the rare event that you experience a product failure or fault, you can contact the Residentia support team on: 1311 HELP (4357)

11.30

Stock of all required spare parts to suit the InAlto appliances is available to ensure the service technician can fix any issue promptly. For more information on the Titus Tekform Quality and Claims policies, visit www.titustekform.com.au/warrantyand-services

Premium quality stand-alone cooktop and oven Superb balance of technology, performance and safety Electric oven with 9 cooking functions 102L oven capacity with Rotisserie Cavity cooling system Triple glazed removable door Self-cleaning catalytic liners 2 + 1 year InAlto warranty

• • • • • • •

Depth (mm)

Height (mm)

900mm Freestanding Oven with Gas Cooktop

Width (mm)

•

Item number

895

597

858-918

604.8A41.102.001

•

900mm Freestanding Oven with Induction Cooktop

5 Italian made Defendi burners with electric under-knob ignition

895 •

597

858-918

604.8A41.302.001

4 zone induction cooktop including large flexi zone

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.31

Kitchen Appliances

Kitchen Appliances Upright Cookers

Kitchen Appliances Built-in Ovens Superb balance of technology, performance and safety Full featured electric oven 80L gross oven capacity Personal assistant with 20 recipes selects optimal cook settings by food type and size 3 + 2 year Teka warranty

• • • •

Depth (mm)

Height (mm)

600mm Stainless Steel Maestro Pyrolytic Oven

Width (mm)

•

Item number

595

559

595

604.8A61.404.100

• • • • • • • • • •

600mm Stainless Steel Maestro Oven

595 • • • • • • • • • •

11.32

12 functions including fan-forced 4 inch TFT display Digital thermostat with temperature regulation 30-270°C Pyrolytic and Hydroclean® PRO cleaning system Soft open and close door Ring illuminated control knobs Touch control programmable timer Quad glazed door Easy to remove door glass system European energy class A+

562

595

604.8A61.404.102

12 functions including fan-forced 4 inch TFT display Digital thermostat with temperature regulation 30-270°C Hydroclean® PRO cleaning system Soft open and close door Ring illuminated control knobs Touch control programmable timer Quad glazed door Easy to remove door glass system European energy class A+

Kitchen Appliances Built-in Ovens Superb balance of technology, performance and safety Electric oven 80L gross oven capacity 3 + 2 year Teka warranty

• • •

Depth (mm)

Height (mm)

600mm Stainless Steel 6 Function Hydroclean® PRO Oven

Width (mm)

Kitchen Appliances

•

Item number

595

555

595

604.8A61.404.001

• • • •

600mm Stainless Steel 9 Function Hydroclean® PRO Oven

595 • • • •

600mm Stainless Steel Multifunction Pyrolytic Oven

Hydroclean® PRO cleaning system 6 cooking functions Triple glazed removable door European energy class A+

• • •

595

604.8A61.404.002

Hydroclean PRO cleaning system 9 cooking functions Triple glazed removable door European energy class A+ ®

595 •

562

559

595

604.8A61.404.003

Pyrolytic & Hydroclean® PRO cleaning system 8 cooking functions Quad glazed removable door European energy class A+

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.33

Kitchen Appliances Built-in Ovens Superb balance of technology, performance and safety Electric oven Triple glazed removable door

• •

Depth (mm)

Height (mm)

900mm Stainless Steel Multifunction Hydroclean® PRO Oven

Width (mm)

•

Item number

890

560

480

604.8A61.404.004

• • • • •

600mm Stainless Steel Minute Timer Fan Forced Oven

595 • • • • •

600mm Stainless Steel Programmable Timer Fan Forced Oven

• • • •

575

595

604.8A41.404.001

5 cooking functions 90L gross capacity Cavity cooling system 120 minute minder timer 2 + 1 year InAlto warranty

595 •

11.34

Hydroclean® PRO cleaning system 91L gross oven capacity 10 cooking functions European energy class A+ 3 + 2 year Teka warranty

575

595

5 cooking functions 90L gross capacity Cavity cooling system Programmable clock/timer 2 + 1 year InAlto warranty

604.8A41.404.002

Kitchen Appliances Built-in Ovens Superb balance of technology, performance and safety Electric oven Cavity cooling system 2 + 1 year InAlto warranty

• • •

Depth (mm)

Height (mm)

600mm Built-in Multifunction Oven, 9 Functions

Width (mm)

Kitchen Appliances

•

Item number

595

575

595

604.8A41.404.003

• • • •

600mm Multifunction Double Oven

565 • • • •

900mm Stainless Steel Fan Forced Oven

9 cooking functions 90L gross capacity Programmable clock/timer Triple layered cool touch glass door

• • •

888

604.8A41.404.004

12 cooking functions 102L gross capacity (42L + 62L) Programmable LED timer Triple glazed removable door

895 •

546

547

475

604.8A41.404.005

9 cooking functions 100L gross capacity Programmable LED timer Triple glazed removable door

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.35

Kitchen Appliances Compact Appliances

600mm Compact Pyrolytic Oven with Hydroclean

Height (mm)

•

Depth (mm)

•

Superb balance of technology, performance and safety Compact luxury kitchen appliances 3 + 2 year Teka warranty

Width (mm)

•

Item number

595

559

455

604.8A62.004.001

• • • • • •

•

600mm Stainless Steel Compact Steam Oven

595 • • • • • • •

600mm Combination Microwave & Multifunction Oven

• • • • • •

559

455

604.8A62.006.001

Hydroclean PRO cleaning system 16 functions 45L gross oven capacity Triple glazed soft close door Sterilisation and regeneration function Personal cooking assistant with 20 recipes Slow-cook function ®

595 •

11.36

Pyrolytic & Hydroclean® PRO cleaning system 45L gross oven capacity Quad glazed removable door 12 cooking functions Personal assistant with 20 recipes Digital thermostat with temperature regulation 30270°C European energy class A+

559

455

604.8A62.008.001

Hydroclean® PRO cleaning system 16 cooking functions 41L gross oven capacity Triple glazed soft close door 2500W maxi grill Personal cooking assistant with 20 recipes Slow-cook function

Kitchen Appliances Compact Appliances Superb balance of technology, performance and safety Compact luxury kitchen appliances 3 + 2 year Teka warranty

• •

Depth (mm)

Height (mm)

Built-in Compact Grinder Coffee Machine

Width (mm)

Kitchen Appliances

•

Item number

595

413

455

604.8A62.010.001

• • • • • • •

Built-in Compact Pods Coffee Machine

Pump power: 15 bar 1.8L water tank capacity 3 functions: coffee, steam, hot water Integrated coffee grinder Grinding coarseness regulator: 13 positions 30 automatic programs 2 cup capacity

595 • • • • • • •

330

455

604.8A62.010.002

Pump power: 15 bar 1L water tank capacity 3 functions: coffee, steam, hot water Integrated pod system 1 cup capacity Storage drawer Waste bin

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.37

Kitchen Appliances Compact Appliances Superb balance of technology, performance and safety Compact luxury kitchen appliances 3 + 2 year Teka warranty

• •

Depth (mm)

Height (mm)

Compact Vacuum Sealer

Width (mm)

•

Item number

595

535

140

604.8A62.012.001

• • • • • •

Warming Drawer

595 • • • • •

11.38

Designed to pair with Teka compacts Vacuum sealing machine Kitchen scale with protective cover Roll holder for aluminium film Roll holder for transparent film Self-closing and soft close

535

140

604.8A69.001.001

Designed to pair with Teka compacts Mark-free stainless steel finish Includes anti-slip matt 30-80°C temperature range Ideal for heating plates, cups and cutlery

Kitchen Appliances Microwaves Superb balance of technology, performance and safety Child safety lock Stainless steel cavity

• •

Depth (mm)

Height (mm)

20L Built-in Microwave with Grill

Width (mm)

Kitchen Appliances

•

Item number

595

325

390

604.8A62.008.100

• • • • • • • • • •

25L Built-in Microwave with Grill

595 • • • • • • • • • •

25L Built-in Convection Microwave

20L capacity 5 power levels, 700W Touch control panel with TFT display 3 shortcut menus 1 preset memory Quartz grill, 1000W 3 cooking modes Automatic defrost options Double glazed door 3 + 2 year Teka warranty

• • • • • • •

380

604.8A62.008.200

25L capacity 5 power levels, 900W Full touch control panel with TFT display 8 shortcut menus 1 preset memory Quartz grill, 1000W 3 cooking modes Automatic defrost options Double glazed door 3 + 2 year Teka warranty

594 •

390

465

388

604.8A42.008.001

25L capacity Frameless black glass built-in design Defrost by weight and time Touch controls 900W microwave power 1100W grill power 2400W convection power 2 + 1 year InAlto warranty

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.39

Kitchen Appliances Aspirating Cooktop Fully integrated air suction system Capture fumes and odours in record time High performance ceramic filters Easy to clean Intuitive controls Available as either recycled (inner motor) or duct-out (external motor) 5 year Elica warranty

• • • • • •

Depth (mm)

Height (mm)

Nikola Tesla Aspirating Cooktop & Integrated Rangehood

Installation mode

Width (mm)

•

Item number

Ducted

830

515

210

604.8A83.020.001

Re-circulated

830

515

210

604.8A83.020.002

• • • • • • •

11.40

9 power levels Touch control Power booster Residual heat indicator Safe activation and child lock Safety shut down Cool induction surface

Superb balance of technology, performance and safety European made glass Residual heat indicators Child lock Stop & Go function Powerplus boost function 3 + 2 year Teka warranty

• • • • • •

Depth (mm)

Height (mm)

600mm Induction Cooktop

Width (mm)

•

Item number

560

490

604.8A63.016.001

• • • • • •

800mm 4 Zone Induction Cooktop

Frameless with bevelled edges 3 cooking zones including 1 extension zone Slide touch controls Independent timer functions for each zone Low temperature function Pan detection system

800 • • • • • •

510

604.8A63.016.002

Frameless with bevelled edges 4 cooking zones Slide touch controls Independent timer functions for each zone Pan detection system Teka Synchro function

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.41

Kitchen Appliances

Kitchen Appliances Induction Cooktops

Kitchen Appliances Induction Cooktops Superb balance of technology, performance and safety Residual heat indicators Child lock

• •

Depth (mm)

Height (mm)

900mm 4 Zone Induction Cooktop

Width (mm)

•

Item number

900

510

604.8A63.016.003

• • • • • • • • • • •

600mm 4 Zone InAlto Induction Cooktop

590 • • • • • • • •

11.42

European made glass Frameless with bevelled edges 4 cooking zones including flexi zone Slide touch controls Independent timer functions for each zone Pan optimisation system Stop & Go function Powerplus boost function iQuick boiling function Teka Synchro function 3 + 2 year Teka warranty

520

604.8A43.016.001

Durable Schott Ceran glass 4 cooking zones with boosters Front touch control operation Frameless with bevelled edges High speed ribbon elements 9 power levels 99 min zone timer 2 + 1 year InAlto warranty

Kitchen Appliances Gas Cooktops Superb balance of technology, performance and safety Heavy duty cast iron trivets Automatic under-knob ignition Flame failure 3 + 2 year Teka warranty

• • • •

Depth (mm)

Height (mm)

600mm Stainless Steel Gas Cooktop

Width (mm)

Kitchen Appliances

•

Item number

600

510

604.8A63.014.001

• •

900mm Stainless Steel Gas Cooktop

860 • •

600mm Ceramic Glass Gas Cooktop

4 burners including a wok burner Easy to clean single press stainless steel hob

• •

604.8A63.014.002

5 burners including a wok burner Easy to clean single press stainless steel hob

610 •

515

512

604.8A63.014.003

Gas on glass cooktop 4 burners including a triple ring wok burner Easy to clean toughened ceramic glass

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.43

Kitchen Appliances Gas Cooktops Superb balance of technology, performance and safety Flame failure

•

Depth (mm)

Height (mm)

700mm Ceramic Glass Gas Cooktop

Width (mm)

•

Item number

710

512

604.8A63.014.004

• • • • • •

900mm Ceramic Glass Gas Cooktop

870 • • • • • •

600mm 4 Burner Gas Cooktop

• • • • • •

512

604.8A63.014.005

Gas on glass cooktop Heavy duty cast iron trivets 5 burners including a double ring wok burner Easy to clean toughened ceramic glass Automatic under-knob ignition 3 + 2 year Teka warranty

600 •

11.44

Gas on glass cooktop Heavy duty cast iron trivets 5 burners including a triple ring wok burner Easy to clean toughened ceramic glass Automatic under-knob ignition 3 + 2 year Teka warranty

510

604.8A43.014.001

4 Italian made Defendi burners Heavy duty 304 grade stainless steel Sturdy enamel trivets Easy to clean single press stainless steel hob Front control operation Electric under-knob ignition 2 + 1 year InAlto warranty

Superb balance of technology, performance and safety Heavy duty 304 grade stainless steel Electronic under-knob ignition Flame failure Cast iron trivets 2 + 1 year InAlto warranty

• • • • •

Depth (mm)

Height (mm)

600mm 4 Burner Side Control Gas Cooktop

Width (mm)

•

Item number

600

510

604.8A43.014.002

• •

700mm 5 Burner Gas Cooktop

700 • •

900mm 5 Burner Gas Cooktop

4 Italian made Defendi burners Easy to clean single press stainless steel hob

•

604.8A43.014.003

5 Italian made Defendi burners Easy to clean single press stainless steel hob

860 •

510

604.8A43.014.004

5 Italian made Defendi burners Easy to clean single press stainless steel hob

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.45

Kitchen Appliances

Kitchen Appliances Gas Cooktops

Kitchen Appliances Electric Cooktops Superb balance of technology, performance and safety 4 cooking zones Residual heat indicators Auto safety switch off 2 + 1 year InAlto warranty

• • • •

Depth (mm)

Height (mm)

600mm 4 Zone Knob Control Electric Cooktop

Width (mm)

•

Item number

590

520

604.8A43.018.001

• • • •

600mm 4 Zone Touch Control Electric Cooktop

590 • • • • • • •

11.46

Durable European made Eurokera glass Side knob control operation Frameless 6 power levels

520

604.8A43.018.002

Durable Schott Ceran glass Front touch control operation Frameless with bevelled edges High speed ribbon elements Child lock 9 power levels 99 min zone timer

Kitchen Appliances Electric Cooktops Superb balance of technology, performance and safety Residual heat indicators Auto safety switch off 2 + 1 year InAlto warranty

• • •

Depth (mm)

Height (mm)

750mm 4 Zone Touch Control Electric Cooktop

Width (mm)

Kitchen Appliances

•

Item number

750

520

604.8A43.018.003

• • • • • • • •

900mm 5 Zone Slide Control Electric Cooktop

Durable Schott Ceran glass 4 cooking zones and 2 extended zones Front touch control operation Frameless with bevelled edges High speed ribbon elements Child lock 9 power levels 99 min zone timer

900 • • • • • • • •

520

604.8A43.018.004

Durable Schott Ceran glass 3 extended zones Front touch slide controls Frameless with bevelled edges High speed ribbon elements Child lock 9 power levels 99 min. zone timer

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.47

Kitchen Appliances Elica Rangehoods Ergonomic built-in configuration Capture fumes and odours in record time 3 speeds plus power booster 5 year Elica warranty

• • •

Depth (mm)

Height (mm)

Adagio Stainless Steel Downdraft Rangehood

Installation mode

Width (mm)

•

Item number

Ducted

875

120

300

604.8A83.030.003

Re-circulated

875

120

300

604.8A83.030.004

• • • • • •

Pandora Stainless Steel Downdraft Rangehood

Ducted

758

120

140

604.8A83.030.001

Re-circulated

758

120

140

604.8A83.030.002

• • • • • •

Meteorite Canopy Rangehood

Sleek integrated pop-up design Touch control 57 dBA noise level Aluminium and charcoal grease filter 800m3/h extraction capacity Available as either recycled (inner motor) or duct-out (external motor)

Ducted • • • • •

11.48

Motorised pop-up design Touch control with optional remote control 57 dBA noise level Aluminium grease filter 800m3/h extraction capacity Available as either recycled (inner motor) or duct-out (external motor)

898

435

Concealed filters Touch control 59 dBA noise level Aluminium grease filter 880m3/h extraction capacity

704

604.8A83.020.100

• • • • • • •

Width (mm)

Depth (mm)

Height (mm)

•

Superb balance of technology, performance and safety Perimeter extraction undermount Strip LED lighting 1000m3/hr extraction Electric buttons with digital lighting Silent DC brushless motor 4 speeds 2 + 1 year InAlto warranty

Item number

520mm Digital Undermount Rangehood

520

295

308

604.8A64.026.001

750mm Digital Undermount Rangehood

750

295

308

604.8A64.026.002

900mm Digital Undermount Rangehood

900

295

308

604.8A64.026.003

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.49

Kitchen Appliances

Kitchen Appliances Undermount Rangehoods

Kitchen Appliances Undermount Rangehoods • • • • •

Width (mm)

Depth (mm)

Height (mm)

•

Superb balance of technology, performance and safety Dishwasher safe aluminium grease filters 3 speeds Push button controls LED lighting 750m3/hr extraction

Item number

520mm Undermount Rangehood

520

280

283

604.8A44.026.001

750mm Undermount Rangehood

750

280

283

604.8A44.026.002

900mm Undermount Rangehood

900

280

283

604.8A44.026.003

11.50

Kitchen Appliances Canopy Rangehoods Superb balance of technology, performance and safety

Depth (mm)

Height (mm)

900mm Teka Canopy Rangehood

Width (mm)

Kitchen Appliances

•

Item number

900

480

625-955

604.8A64.020.001

• • • • • • •

900mm Box Canopy Touch Rangehood

900 • • • • • •

900mm Island Canopy Rangehood

850m3/hr perimeter extraction Inner metallic grease filters LED strip lighting Double turbine motor Digital touch control panel 3 speeds + intensive mode 3 + 2 year Teka warranty

• • • • • • •

548-1028

604.8A44.020.005

1000m /hr extraction Stainless steel baffle filters LED lighting 4 speeds Black glass fascia with touch controls 2 + 1 year InAlto warranty 3

900 •

500

600

650-1150

604.8A44.020.006

Island rangehood design 1000m3/hr perimeter extraction Stainless steel baffle filters LED lighting 4 speeds including turbo Black glass fascia "Invisaline" touch controls 2 + 1 year InAlto warranty

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.51

Kitchen Appliances Canopy Rangehoods Superb balance of technology, performance and safety LED lighting Stainless steel baffle filters 2 + 1 year InAlto warranty

• • •

Depth (mm)

Height (mm)

900mm Box Canopy Rangehood

Width (mm)

•

Item number

900

500

548-1028

604.8A44.020.004

• • • •

600mm Canopy Rangehood

600 • • •

900mm Canopy Rangehood

•

500

638-1018

604.8A44.020.001

1000m /hr extraction 4 speeds including turbo Digital touch control panel 3

900 •

11.52

750m3/hr extraction 2 LED lamps 3 speeds Push button controls

500

638-1018

1000m3/hr extraction 4 speeds including turbo

604.8A44.020.003

Kitchen Appliances Canopy Rangehoods • • • •

Depth (mm)

Height (mm)

600mm Curved Glass Canopy Rangehood

Width (mm)

Kitchen Appliances

•

Superb balance of technology, performance and safety 1000m3/hr extraction LED lighting Black glass fascia with touch controls 2 + 1 year InAlto warranty

Item number

600

500

534-1014

604.8A44.020.002

•

900mm Curved Glass Canopy Rangehood

900 • •

900mm Flat Glass Canopy Rangehood

4 speeds + a timer

•

570-1050

604.8A44.020.007

4 speeds including turbo Stainless steel baffle filters

900 •

500

554-1034

604.8A44.020.008

3 speeds Stainless steel baffle filters

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.53

Kitchen Appliances Integrated Rangehoods • • • • • •

Width (mm)

Depth (mm)

Height (mm)

•

Superb balance of technology, performance and safety Dishwasher safe aluminium grease filter LED lighting 1000m3/hr extraction 3 speeds Push button controls 2 + 1 year InAlto warranty

Item number

600mm Integrated Box Canopy Rangehood

565

285

352

604.8A44.020.009

900mm Integrated Box Canopy Rangehood

865

285

352

604.8A44.020.010

11.54

• • • • • •

Width (mm)

Depth (mm)

Height (mm)

•

Superb balance of technology, performance and safety Dishwasher safe aluminium grease filters LED lighting 440m3/hr extraction Ducted or recirculating installation options 2 speeds 2 + 1 year InAlto warranty

Item number

600mm Slide-out Stainless Steel Rangehood

599

278-472

200

604.8A44.024.001

900mm Slide-out Stainless Steel Rangehood

900

278

176

604.8A44.024.002

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.55

Kitchen Appliances

Kitchen Appliances Slide-out Rangehoods

Kitchen Appliances Rangehood Accessories •

•

Ensure your exhaust is ducted properly with a flue extension Use extension with canopy rangehoods

Item number

604.8A44.028.001

Rangehood Flue Extensions, 1200mm

•

For use with > canopy rangehoods 604.8A44.020.001 & 604.8A44.020.003

604.8A44.028.002 •

For use with > canopy rangehoods 604.8A44.020.004 & 604.8A44.020.008

604.8A44.028.003 •

Made of stainless steel

For use with > canopy rangehood 604.8A44.020.002 & 604.8A44.020.007

Item number

604.8A44.028.004

Rangehood Carbon Filter

•

Made of plastic and carbon mesh

11.56

Designed to replace dirty carbon filters in your rangehoods

Kitchen Appliances Dishwashers Superb balance of technology, performance and safety Delay start Child lock

• •

Depth (mm)

Height (mm)

600mm Teka Stainless Steel Multifunction Dishwasher

Width (mm)

Kitchen Appliances

•

Item number

598

610

845

604.8A65.030.002

• • • • • • • • • •

600mm InAlto Stainless Steel Multifunction Dishwasher

598 • • • • • • • • • •

600mm InAlto Stainless Steel Dishwasher

14 place settings Third cutlery drawer 7 wash programs 3.5 star energy rating 4.5 star WELS water rating Quiet 49dB operation Water leak, overflow and Aquastop protection Height adjustable upper baskets Stainless steel micro filter 3 + 2 year Teka warranty

• • • • • • •

845

604.8A25.030.003

Mark-resistant stainless steel finish 14 place settings Third cutlery drawer 7 wash programs 3.5 star energy rating 4.5 star WELS water rating Anti-leak amd anti-flood devices Height adjustable upper baskets Stainless steel micro filter 2 + 1 year InAlto warranty

598 •

615

845

604.8A45.030.001

Mark-resistant stainless steel finish 14 place settings Collapsible plate racks 4 wash programs 3 star energy rating 4.5 star WELS water rating Anti-leak and anti-flood devices 2 + 1 year InAlto warranty

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.57

Kitchen Appliances Dishwashers Superb balance of technology, performance and safety Delay start 2 + 1 year InAlto warranty

• •

Depth (mm)

Height (mm)

600mm Integrated Dishwasher

Width (mm)

•

Item number

598

550

815-865

604.8A45.032.001

• • • • • • • • •

450mm Stainless Steel Multifunction Freestanding Dishwasher

448 • • • • • • • •

11.58

14 place settings Fully integrated installation Slide-out cutlery tray 8 wash programs 3.5 star energy rating 4.5 star WELS water rating Anti-leak, anti-flood and Aquastop devices Easy to clean slimline control panel Door front not included

600

845

604.8A45.030.002

Mark-resistant stainless steel finish 10 place settings Collapsible plate racks 7 wash programs 3.5 star energy rating 3.5 star WELS water rating Anti-leak and anti-flood devices Child lock

Kitchen Appliances Refrigeration Superb balance of technology, performance and safety 2.5 star energy rating 2 + 1 year InAlto warranty

• •

Depth (mm)

Height (mm)

545L Stainless Steel French Door Refrigerator

Width (mm)

Kitchen Appliances

•

Item number

833

740

1775

604.8A68.046.001

• • • • • • • • •

244L Integrated Refrigerator

343L fridge volume 202L freezer volume Rapid freezing and cooling functions Dual cycle/air cooled refrigeration system Multi airflow Recessed handle Frost-free LED display Interior LED lighting

540 • • • • • •

540

1770

604.8A68.046.002

185L fridge volume 59L freezer volume Easy-fit integrated design Easy-slide temperature control Effective ventilation Frost-free freezer

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.59

Kitchen Appliances Refrigeration Touch key control panel Blue LED interior light Triple glazed tinted door Stainless steel reversible door 2 + 1 year InAlto warranty

• • • •

Depth (mm)

Height (mm)

46 Bottle Wine Chiller

Width (mm)

•

Item number

595

570

813-833

604.8A53.001.001

• • •

178 Can Beverage Centre

595 • • •

11.60

145L/46 bottle capacity Dual temperature zones 6 wooden beech shelves with stainless steel trim

564

820

604.8A53.001.002

145L/178 can capacity Single temperature zone 3 metal shelves with wooden trim

Outdoor Appliances BBQ and Patio • •

• • • • • • • •

Item number

555

500

840

604.8A53.060.001

118L/178 can capacity 1°-10° temperature range Tropical rated up to 43°C Seamless stainless steel framed glass door Triple glazed and heated glass Electronic controls Internal LED strip lighting Weather resistant IPX4 rated

1200

Outdoor Dual Motor Barbeque Rangehood • • • • •

Built-in Barbeque Grill

Height (mm)

Outdoor Beverage Centre

Depth (mm)

Burners

Width (mm)

Kitchen Appliances

•

Premium 304 grade stainless steel Suitable for outdoor use 2 + 1 year InAlto warranty

700

1279

604.8A44.060.001

Sturdy push button controls 6 rotatable LED lights 8 dishwasher safe baffle filters 3 speeds Powerful 2000m3/hr air flow

4 Main Burners

800

652

542

604.8A55.060.001

6 Main Burners

1101

652

542

604.8A55.060.002

• • • • • • • • •

Internal lighting LED illuminated control knobs Heavy duty flame diffusers Double-sided cast iron plate Stainless steel cooking grid Temperature gauge Grease tray Rotisserie Infrared rear burner

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.61

Laundry Appliances Front Load Washers 16 programs Delay start LED display 4 star WELS water rating 3 + 2 year Teka warranty

• • • •

Width (mm)

Depth (mm)

Height (mm)

Front Load Washing Machine

Capacity (kg)

•

Item number

595

850

604.8A66.034.002

• • • • • • •

Combination Front Load Washing Machine & Dryer

10/7 • • • • • • • • • • •

11.62

Spin speed selector Pre-wash option Teka Speed Wash technology 'Add a garment' feature Water temperature control 3.5 star energy rating 15 minute Quick Wash

595

565

850

10kg washing capacity 7kg drying capacity 1400 RPM spin speed Teka Speed Wash/Dry program Quiet 69 dBA operation Auto-sensing drying Anti-crease function Safety thermostat sensor Reverse tumbling action Transparent door 3.5/4 star energy rating

604.8A66.038.002

Laundry Appliances Clothes Dryers • • • •

Depth (mm)

Height (mm)

7kg Heat Pump Dryer

Width (mm)

Laundry Appliances

•

Delay start Removable lint filter Auto power off Child lock 3 + 2 year Teka warranty

Item number

595

622

845

604.8A67.042.001

• • • • • • • • • • •

7kg clothes capacity 16 drying programs Auto-sensing drying Anti-crease function Water tank display 375mm door opening LED display 198 min full load standard dry time Transparent door Reverse tumbling action 6 star energy rating

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.63

DOMUS Ducting

Ducting and Ventilation Product Range Supertube 125

Supertube 125 is ideal for the ducting of all rangehoods and powerful fans. The airflow efficiency of Supertube 125 is maintained even on long ducting runs and can be used with appliances of high extraction rates.

EasiPipe

EasiPipe round ducting is available in two diameters: 125 and 150mm. EasiPipe is a multi-application system and is ideal for larger fans, rangehoods, whole-house ventilation systems, stack ventilation and air conditioning.

A round pipe system represents the most efficient air flow conduit as less air turbulence occurs.

Hoses & Accessories

Flexible hoses provide a solution to overcome situations where a rigid component cannot be installed. Manufactured in PVC self-extinguishing material or polyester coated aluminium for extra strength. Hoses are mainly for use with tumble dryers or when there is slow moving air. Round hoses are available in sizes which are compatible with both of our ranges in various standard lengths.

A selection of accessories including hose connectors, clips and tape provide effective connections from flexible to rigid ducting.

11.64

DOMUS Ducting

Wall Outlets

Kits 5904

D215W H 114-5

126-5

5611

DOMUS Ducting manufacture a comprehensive range of wall outlets, which are fully compatible with all DOMUS system configurations. A choice of three round spigots to fit all EasiPipe sizes and rectangular sockets for use with Supertube 125 are available.

Wall outlets are manufactured in White UV stabilised finishes. There are various types of outlets for use in different situations.

A range of standard boxed kits is available providing a one-stop solution to many popular installation requirements.

However, should these kits not provide the necessary products, special kits can be designed to meet the exact specification of the installation. All are packed in purpose made cartons.

126-5

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.65

Ducting

Ducting and Ventilation Product Range

Louvred Grill with Flyscreen

•

UV stabilised plastic Protection from vermin and pests

Outer Width x Height (mm)

Wall Outlet with Gravity Flaps

•

Outer Diameter (mm)

Ducting Wall Outlets and Ventilators

Item number

125

200 x 200

604.8C06.590.000

150

200 x 200

604.8C06.690.000

125

200 x 200

604.8C06.594.000

150

200 x 200

604.8C06.694.150

201 x 57

604.8C06.501.000

Brick Size Wall Outlet •

11.66

Brick sized wall outlet for use with 515 flat channel

204 x 60

Flat Channel Clip

204 x 60

Flat Channel Connector

Elbow Bend

Vertical 90° Bend

Without damper

Length (mm)

Flat Channel

Ducting

Creates efficient air flow Ideal for use with larger fans and rangehoods

Outer Diameter (mm)

•

Inner Width x Height (mm)

•

Outer Width x Height (mm)

Ducting SuperTube 125 Flat Modular Ducting

Item number

1500

604.8C04.515.000

604.8C04.122.000

204 x 60

604.8C04.520.000

125

204 x 60

604.8C04.540.000

150

204 x 60

604.8C04.640.000

204 x 60

Download supporting documentation from the Titus Tekform website titustekform.com.au

604.8C04.560.000

11.67

Horizontal 90° Bend

Adapter with Offset Centres

262 x 118 •

Adjustable Horizontal Bend

11.68

Item number

125

204 x 60

604.8C04.570.000

204 x 60

604.8C04.550.000

205 x 61

604.8C06.115.000

Rectangular Wall Plate 115 for use with brick size wall outlet.

201 x 57 •

Inner Width x Height (mm)

Adapter

Outer Diameter (mm)

Outer Width x Height (mm)

Ducting SuperTube 125 Flat Modular Ducting

204 x 60

604.8C04.545.000

Adjustable to and from 3.75° - 48.75°

• •

Available in both 125mm and 150mm diameter Very efficient with low turbulence Flexible usage with multiple applications

Right Angle Bend

Straight Pipe Connector

Download supporting documentation from the Titus Tekform website titustekform.com.au

Ducting

•

Outer Diameter (mm)

Ducting EasiPipe Round Modular Ducting

Item number

125

604.8C02.590.000

150

604.8C02.690.000

125

604.8C02.593.000

150

604.8C02.693.000

11.69

Inner Diameter (mm)

Ducting EasiPipe Round Modular Ducting

DekliteÂŽ Flashing on Lead

Roof Cowl

11.70

Item number

Deklite original 75-160

604.8C02.104.000

Deklite Tile on lead 75-160

604.8C02.114.000

125

604.8C02.505.000

150

604.8C02.507.000

Pipe Fastener

EasiPipe

Download supporting documentation from the Titus Tekform website titustekform.com.au

Ducting Length (mm)

Inner Diameter (mm)

Outer Diameter (mm)

Ducting System Parts and Flexible Hose

Item number

125

604.8C02.596.150

150

604.8C02.696.150

125

1200

604.8C02.530.000

150

1000

604.8C02.110.000

11.71

Ducting System Parts and Flexible Hose

• •

Inner Diameter (mm)

Length (mm)

•

For usage where rigid piping cannot be installed Suitable for slow air movement Ideal for clothes dryer installations

Item number

Round PVC Coated Flexible Hose

127

1000

604.8C02.561.000

Round Nude Aluminium Hose

127

3000

604.8C02.905.000

150

3000

604.8C02.906.000

11.72

Circular Reducer and Adapter

Adapter 125 Reducer

125

Ducting

Inner Diameter (mm)

Outer Diameter (mm)

Ducting Pipe and Hose Accessories

Item number

150

604.8C02.118.000

100

604.8C02.119.000

These products can be fitted together to form either a 125100mm adapter or a 125-150mm reducer.

Threaded Hose Connector with Socket

Download supporting documentation from the Titus Tekform website titustekform.com.au

125

604.8C02.125.150

150

604.8C02.126.000

11.73

Cable Tie

150

11.74

Item number

604.8C02.125.000

PVC Duct Sealing Tape

Round Wall Plate

Length (m)

Outer Width x Height (mm)

Inner Diameter (mm)

Ducting Pipe and Hose Accessories

4.6

604.8C02.123.000

125

154 x 154

604.8C02.145.000

150

205 x 205

604.8C02.146.000

Ducting Modular Ducting Kits â&#x20AC;˘

Complete solutions for popular installations Available as boxed kits

Ducting

â&#x20AC;˘

Item number

Supertube 125 Ducting Kit for 125mm Diameter

604.8C08.225.000

Supertube 125 Ducting Kit for 150mm Diameter

604.8C08.226.000

D215W H Flexible Hose Ducting Kit for Rear Ducting 125mm Diameter

604.8C08.215.000

5904

114-5

126-5

5611

126-5

Download supporting documentation from the Titus Tekform website titustekform.com.au

11.75

x.1

Doors & Panels

Doors, Panels & Surfaces

Download supporting documentation from the Titus Tekform website titustekform.com.au

x.2

Doors & Panels Product Guide

Stefano Orlati Solid Surfaces Page

OptiGlaz Gloss Acrylic Board

12.4

OptiMatt PET Matt Board

12.6

Chiara 100% Acrylic Benchtops

12.8

Metalaminates and HMR Particle Board

12.10

Duraform® Vinyl Wrapped Doors Series One - Contemporary Soft Corners

12.11

Series Two - Sharp Lines

12.12

Series Three - Square Corners and Defined Lines

12.13

Series Four - Classical Country

12.14

Series Five - Raised Designs

12.15

Options and Accessories

12.16

Ordering Information

12.20

Alifrost® Aluminium Doors Product Overview and Application

12.21

Frame Options

12.22

Ali Handle

12.24

Insert Options

12.25

Extras and Accessories

12.27

Ordering Information

12.27

Belle Roller Doors

12.2

Product Overview and Specification

12.28

Ordering Information

12.29

Doors & Panels

Opti Board Product Overview The Stefano Orlati OptiGlaz and OptiMatt board range offers interior designers, specifiers and architects a selection of high gloss and matt doors and panels to beautifully finish any kitchen or room design. •

•

OptiGlaz high gloss acrylic board is bonded to select grade MDF substrate using PUR hotmelt lamination technology OptiMatt PET board is manufactured from thermoformed Polyethelene Terephthalate for a safe, non-toxic, strong and lightweight material that is 100% recyclable The Opti Board range is available in sheets or can be prefabricated to your specifications Colour-matched edgebanding available > see page 6.3

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.3

OptiGlaz Gloss Acrylic Board Designed for vertical surface applications, OptiGlaz offers an easy-clean, superior high gloss mirror-like finish for drawers, door fronts and joinery.

OptiGlaz

Anthracite Pearl

Champagne Pearl

Cream

Great White

Ice White

Ivory

Ivory Pearl

Silver Pearl

Super Black

12.4

OptiGlaz Gloss Acrylic Board • • • •

•

OptiGlaz Acrylic Board

Ice White

2440

1220

18.2

602.8O26.120.001

Super Black

2440

1220

18.2

602.8O26.120.002

Ivory

2440

1220

18.2

602.8O26.120.003

Cream

2440

1220

18.2

602.8O26.120.004

Great White

2440

1220

18.2

602.8O26.120.005

Silver Pearl

2440

1220

18.2

602.8O26.120.006

Champagne Pearl

2440

1220

18.2

602.8O26.120.007

Ivory Pearl

2440

1220

18.2

602.8O26.120.008

Anthracite Pearl

2440

1220

18.2

602.8O26.120.009

Ice White

3040

1220

18.2

602.8O31.120.001

Width (mm)

Item number

Colour

Length (mm)

Thickness (mm)

•

Ultra high gloss ripple-free surface UV and colour fade protected High scratch resistance Won’t chip, crack or delaminate 9 double-sided finishes with matching edgebanding Non-directional metallics Single-sided with matching melamine back available in white and black

Doors & Panels

•

For complementary edgebanding see pages > 6.3 - 6.5

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.5

OptiMatt PET Matt Board Designed for vertical surface applications, OptiMatt offers an easy-clean, superior velvet-like finish for cabinetry and furniture applications.

OptiMatt

12.6

Anthracite

Black

Cashmere

Dove Tale

Ivory

White

OptiMatt PET Matt Board • • • •

Item number

White

2440

1220

18.2

602.8O24.120.001

Black

2440

1220

18.2

602.8O24.120.002

Ivory

2440

1220

18.2

602.8O24.120.004

Cashmere

2440

1220

18.2

602.8O24.120.007

Dove Tale

2440

1220

18.2

602.8O24.120.025

Anthracite

2440

1220

18.2

602.8O24.120.027

White

3040

1220

18.2

602.8O30.120.001

Black

3040

1220

18.2

602.8O30.120.002

Ivory

3040

1220

18.2

602.8O30.120.004

Width (mm)

Thickness (mm)

OptiMatt PET Board

Colour

Length (mm)

Doors & Panels

•

Fingerprint-resistant surface Made from recyclable PET High scratch resistance Won’t chip, crack or delaminate Features double-sided decors

For complementary edgebanding see pages > 6.3 - 6.5

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.7

Stefano Orlati Chiara 100% Acrylic Benchtops The Chiara benchtop is easily fabricated to your specifications and supremely low maintenance. All 11 finishes are factory machined and ready to finish any kitchen.

Colour Options:

Amalfi

Palmanova

Manarola

Lecce

Ravello

Sorrento

Atrani

Portofino

Cefalu

Positano

Domaso

Custom Edge Profiles: Pencil Round

12.8

Arriss

Waterfall

Stefano Orlati Chiara 100% Acrylic Benchtops • •

•

Chiara Acrylic Benchtops

Manarola

3660

760

12.3

602.8O27.360.001

Positano

3660

760

12.3

602.8O27.360.002

Sorrento

3660

760

12.3

602.8O27.360.003

Portofino

3660

760

12.3

602.8O27.360.004

Ravello

3660

760

12.3

602.8O27.360.005

Amalfi

3660

760

12.3

602.8O27.360.006

Atrani

3660

760

12.3

602.8O27.360.007

Cefalu

3660

760

12.3

602.8O27.360.008

Palmanova

3660

760

12.3

602.8O27.360.009

Lecce

3660

760

12.3

602.8O27.360.010

Domaso

3660

760

12.3

602.8O27.360.011

50ml Solid Surface Adhesive

Width (mm)

Item number

Colour

Length (mm)

Thickness (mm)

Doors & Panels

•

More versatile than granite or marble Strong, cool-touch material with inconspicuous joins 12mm solid colour surface 10 year warranty

Manarola

602.8O28.050.001

Positano

602.8O28.050.002

Sorrento

602.8O28.050.003

Portofino

602.8O28.050.004

Ravello

602.8O28.050.005

Amalfi

602.8O28.050.006

Atrani

602.8O28.050.007

Cefalu

602.8O28.050.008

Palmanova

602.8O28.050.009

Lecce

602.8O28.050.010

Domaso

602.8O28.050.011

Colour matched adhesive for seamless joins with the Chiara 100% Acrylic Benchtops

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.9

Doors & Panels

Doors & Panels Stefano Orlati Metalaminates & HMR Particleboard

Product Overview

•

A durable, non-staining, non-marking material that is ideal for kickers & feature panels Available in two colours: Brushed Aluminium & Brushed Stainless Steel Premounted large sheets & smaller width rips on HMR particleboard available for ease of installation & use in moisture prone areas such as kitchens & bathrooms

Product ordering information

Item number Brushed Aluminium Metalaminate 3600x 1200 x 0.8mm

602.8M36.120.048

Brushed Stainless Metalaminate 3600x 1200 x 0.8mm

602.8M36.120.058

Brushed Aluminium HMR Particle Board Sheet 3600 x 1200 x 16mm

602.8M36.120.148

Brushed Aluminium HMR Particle Board Rip 3600 x 120 x 16mm

602.8M36.012.048

Brushed Aluminium HMR Particle Board Rip 3600 x 150 x 16mm

602.8M36.015.048

12.10

Doors & Panels

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series One

Contemporary soft, plain faced designer, which will enhance a modern kitchen.

Avoca

Bass

Buffalo

Gordon

Gordon 12

Jamieson

Kiewa

King

Omeo

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.11

Doors & Panels

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series Two

Soft round corners and sharp lines for simplicity and functionality in design.

Barwon

Fitzroy

Huon

12.12

Canning

Daly

Emu

Franklin

Hastings

Hunter

Tambo

Doors & Panels

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series Three

Square corner routes in most styles and straight defined lines.

Bemm

Catherine

Darling

Derwent

Esk

Goulburn

Jardine

Lachlan

Tarwin

Tusmore

Murray

Swan

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.13

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series Four

Classical country styling with contemporary modern lines. V-grooved panels to flat panelled designs.

12.14

Acheron

Dargo

Edward

Hay

Howqua

LaTrobe

Loddon

Thompson

Thompson 3

Thompson 5

Thompson SL

Thompson 3SL

Thompson 5SL

Doors & Panels

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Series Five

Detailed design. Raised, 3-dimensional bolection moulds, complimented by v-grooved or flat panel plaques.

Aire

Hopkins

Hume Lachlan

Hume Murray

Plenty

Yarra

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.15

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Options & Accessories

Fold Backs and Wrap Around Panels Option End panels are vinyl wrapped and returned without joins. Ideal for refrigerator panels, pantry panels, island end panels and decorative pieces for furniture.

18 or 35mm Fold Back Available in 100, 200, 300, 400 and 500mm returns. Restricted by sheet size

600 18 100

12.16

Doors & Panels

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Options & Accessories

There is a wide range of options available including: decorative flutes, circular flutes, wine racks, roller shutter frames, open shelves, capping mould and a range of one to eight pane colonial frames.

Column

Flute

Flute with singular rose

Flute with two roses

Decorative trim

Rose

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.17

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Options & Accessories Wine Rack Tubes Available in black, white and stainless steel. Overall dimension of tube is 310mm front to back with a 90mm diameter hole.

Cap Moulds Available in two sizes.

Cap Mould

Frames Frames are available up to 10 panes depending on door size.

Single frame

12.18

Cap Mould 65

Colonial Four Pane

Colonial Six Pane

Colonial Eight Pane

Doors & Panels

Doors & Panels DuraformÂŽ Vinyl Wrapped Doors

Door Variations

All Duraform doors come standard as square. However, all door profiles are also available with the following variations:

Shoulder Arch

Round Arch

Arch

Double Arch

Double Bow Arch

Bow Arch

Recess Rails 70 x 25mm Recess rail dimensions: 70 x 25mm Available in two profiles, Type C and Type L

Type C

Download supporting documentation from the Titus Tekform website titustekform.com.au

Type L

12.19

Doors & Panels Duraform® Vinyl Wrapped Doors

Ordering Tools and Resources

Visit titustekform.com.au Download the Janper Vinyl Door order forms Download the Janper Door & Panel Brochure Visit your local Titus Tekform branch to view samples and displays •

OFFICE USE ONLY Job N°.

……………....………………………………...

Invoice N°. Terms:

……...………..…………………………...

COD

Account

Page N° 1 / 2

• •

Customer: Address:

Order N°: Date Ordered: Date Required: Job No:

Contact: Phone: Fax:

Alterations and cancellations must be made within 4 hours of the order being placed. Any alterations and cancellations after this time could incur a charge. All alterations must be in writing quoting the order number.

Door Type:

Edge Detail:

Arched or Square:

6mm Pencil Round

(6mm Pencil Round Standard on Series 2 - 3) Line No

Qty

Height (mm)

Width (mm)

Ogee

X for square edge T

Door Colour:

Stepped Pencil Round

2mm Pencil Round

Description

Square

Customer Use

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Syd 29 30

CAPPING MOULD - 2.4m LENGTHS x 38mm HIGH Sydney Unit 1&2, 41-43 Whyalla Place, Prestons, NSW, 2170 02 9826 0007 02 9826 0074 (Fax) Tasmania 88 Hopkins St, Moonah, Tas 7009 6273 1199 Fax (03) 6273 0050

South Australia Phone (03) 8 8447 3700 8 8447 3183 (Fax) Postal: PO Box 357, Bayswater, VIC, 3153

Brisbane 1/32 Northlink Place, Virginia, QLD, 4014 07 3266 3999 07 3266 5234 (Fax) Postal: PO Box 266, Northgate, QLD, 4013

12.20

Newcastle Unit 3, 100 Munibung Road, Cardiff, NSW, 2285 02 4954 4011 02 4954 4233 (Fax)

Townsville 20 Civil Road, Garbutt, QLD, 4814 07 4779 1366 07 4779 1316 (Fax) Postal: PO Box 7922, Garbutt, QLD, 4815

Melbourne 8/59 Jersey Road, Bayswater, VIC, 3153 3 9737 5566 3 9729 8780 (Fax) Postal: PO Box 357, Bayswater, VIC, 3153 Wodonga 2/20 Mint Street, Wodonga, VIC, 3690 2 6056 3188 2 6056 3190 (Fax) Northern Territory 1/32 Northlink Place, Virginia, QLD, 4014 07 3266 3999 07 3266 5234 (Fax) Postal: PO Box 266, Northgate, QLD, 4013

Doors & Panels

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Product Overview •

•

• •

•

Alifrost® is a range of aluminium framed Perspex®, 3D gloss acrylic, glass & AliMesh® doors & panels Alifrost® offers a modern look with an exclusive range of European designed frames combined with the latest decorative insert options 10 year guarantee applicable on all genuine Perspex® inserts Easy maintenance – when supplied with a Perspex® Frost insert, Alifrost® doors have a unique “anti-fingermark” finish reducing the need for cleaning When inserted with Perspex® & 3D acrylic gloss Acrylic, Alifrost® doors are ultra hygienic making them ideal for food preparation areas Alifrost® doors offer superior impact resistance over glass when used with Perspex® inserts Alifrost® doors with Perspex® are lightweight (half that of glass doors), making them easier to use & less stress on hardware components particularly for larger doors Environmentally friendly – the two main components of Alifrost® doors, aluminium & Perspex® are fully recyclable

Product Applications • • •

• • • • •

Kitchens/bathroom doors, drawers & lift up panels Vanity mirror cabinet doors – meets Australian Safety standards Alfresco kitchens - Perspex® is guaranteed for 10 years for exterior applications Entertainment units Speaker covers - Alimesh® inserts only Wardrobes Caravans Room dividers

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.21

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Frame Options 19 Square

• • • • •

•

43 x 55 Flat

• • • • •

43 x 55 - Euro Stainless

•

• • •

9 x 55 Box

• • • • •

•

12.22

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for all insert types Integrated handle option available Recommended for hinge & bi-fold doors, sliding and lift flap doors Powder coat colours also available

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for all insert types Integrated handle option available Recommended for hinged doors, lift flap and lift up doors, drawers and sliding doors

Superior Euro Stainless (ES) finish to match the latest Euro appliances Hollow construction for rigidit Suitable for all insert types Recommended for hinged doors, lift flap and lift up doors, drawers and sliding doors

Frame Options 45 x 45 Flat

• • • •

•

45 x 45 Flat - Brushed Stainless

• • • •

6 x 45 Box - Clear Anodised

• • • • •

6 x 45 Box - Polished Silver

• • • •

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for all insert types Recommended for hinged doors, lift flap and lift up doors, drawers and sliding door Powder coat colours now available

Superior brushed stainless (BS) finish Hollow construction for rigidity Suitable for all insert types Recommended for hinged doors, lift flap and lift up doors, drawers and sliding doors

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for all insert types Highly recommended for use with glass as a vanity mirror Powder coat colours available

New polished silver finish with anti scratch ribbed back Hollow construction for rigidity Suitable for all insert types Highly recommended for use with glass as a vanity mirror

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.23

Doors & Panels

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Frame Options

55 Slimline

• • • • •

•

Superior clear anodised (CA) finish Hollow construction for rigidity Suitable for non-translucent (NT) inserts only Integrated handle option available Highly recommended for use with 3D acrylic gloss inserts Powder coat colours available

AliHandle™

• • • • •

12.24

Superior clear anodised (CA) finish New integrated, flush fitted handle option Suitable for 19 Square, 43 x 55 Flat CA, 9 x 55 Box & 55 Slimline 50,100 & 150mm length options

Doors & Panels

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Insert Options Perspex® Ultra High Gloss

• • • • • • • • • •

Perspex® Frost – Anti Fingermark Finish

• • • • • • • • • • •

Perspex® Pearlescent – Metallic Lustre

• •

Eurmir® - Decorative Acrylic Mirror

•

01 Black 962 02 Café Latte 5263 03 Clear 000 04 Opal 010 -70% LT 05 Opal 030 – 70% LT 06 Opal 069 – 9% LT 07 Scarlet Rose 4262 08 Shadow Grey 9563 09 Vanilla 9638 10 Green 6T81

11 Crystal Clear S2 000 12 Charcoal Grey S2 9T23 13 Glacier Green S2 6T21 14 Earth Brown S2 5T33 15 Polar White S2 030 16 Moonlight White S2 1T41 17 Midnight Black S2 9221 18 Desert Beige S2 5268 19 Walnut Brown S2 5269 20 Ash Grey S2 9642 21 Mineral Grey S2 9643

22 Pearl 1PY1 23 Platinum 9PY2

24 Grey 40

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.25

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Frame Options Glass

• • •

Alimesh® - One Way Vision Aluminium Mesh

• • • •

Alum Composite

• • •

Perspex® Impressions Linear – Textured

• • • • •

25 Clear Glass (toughened) 26 Frosted Glass (toughened) 27 Glass Safety Mirror

28 Clear Anodised 00001 29 Black 19268 30 White 81880 31 White Birch 37131

32 New Brushed Silver AC32 33 New Metallic Charcoal BC44W 34 New Metallic Sliver BC25

35 Clear P1 000 36 Opal P1 030 37 Grey P1 9T1D 38 Black P1 9221 39 Brown P1 5T23

= Translucent

12.26

LT= Light Transmission Level

Alifrost® Extras

1. Printed patterns available on request (minimum quantities apply) 2. Custom colours and powder coated frames available on request (minimum quantities apply) 3. Multiple inserts with Alirail® - a cross rail for multiple inserts & added rigidity. Suitable for 19 Square, 9 x 55 Box & 43 x 55 Flat frames. Recommended for doors & panels larger than 1.92sqm

Ordering Alifrost® Doors Visit titustekform.com.au Download the Alifrost® door order form Download the latest Alifrost® brochure Visit your local Titus Tekform branch to view samples & displays •

• •

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.27

Doors & Panels

Doors & Panels Alifrost® Aluminium Framed Doors & Drawer Fronts

Doors & Panels Belle Roller Doors

Product Overview • •

•

• •

•

Belle roller doors are ideal for all storage requirements The door glides open & unlike hinged or bi-fold doors, the entire space in front of the door can be used Ideal for concealing kitchen appliances when not in use with the closed door providing an elegant, streamline look Available in laminate, vinyl, timber & MDF Doors can be manufactured in any size up to 2 metres x 2 metres Doors can be fitted with locks, providing extra security in commercial & home office applications A remote controlled electric motor can be fitted

Product Specifications

Side View

Note: 1) Dimension C equals 100mm when the door is fully opened 2) Add 50mm to DIMENSION A for making installation easier

12.28

Height (mm)

To 600

190

110

601-900

200

130

901-1200

210

140

1201-1500

215

155

1501-1800

220

170

1801-2100

225

180

Doors & Panels

Doors & Panels Belle Roller Doors

Product Specifications

Isometric View Plan View

Odering Belle Roller Doors

Visit titustekform.com.au Download the Belle Roller Door order forms. BELLE ROLLER DOOR ORDER FORM COMPANY NAME

DATE ORDERED BY

ORDER NUMBER

DEL. BRANCH

INTERNAL CARCASE MEASUREMENTS QTY

HEIGHT

WIDTH

WORDS

NOTE: IF WORDS ARE NOT PRINTED, TEKFORM WILL NOT ACCEPT RESPONSIBILITY FOR THE MISREADING OF ILLEGIBLE DIGITS

MATERIAL DESCRIPTION MDF

LAMINATE

TIMBER

COLOUR

BRAND

TYPE

FINISH

VINYL

OTHER DISPLAY DOOR

MESSAGE - SHOWROOM ADDRESS

SUPPLIED MATERIAL

DELIVERY ADDRESS

STATE

POSTCODE

Titus Tekform Pty Ltd Sydney

Unit 1&2, 41-43 Whyalla Place, Prestons, NSW, 2170 PH: 02 9826 0007 FAX: 02 9826 0074

Newcastle

Unit 3, 100 Munibung Road, Cardiff, NSW, 2285 PH: 02 4954 4011 FAX: 02 4954 4233

Melbourne

8/59 Jersey Road, Bayswater, 3153 PH: 03 9737 5566 FAX: 03 9729 8780

Wodonga

2/20 Mint Street, Wodonga, VIC, 3690 PH: 02 6056 3188 FAX: 02 6056 3190

PO Box 357, Bayswater, VIC, 3153 PH: 08 8447 3700 FAX: 08 8447 3183

Tasmania

88 Hopkins Street, Moonah, TAS, 7009 PH:03 6273 1199 FAX: 03 6273 0050

Brisbane

1/32 Northlink Place, Virginia, QLD, 4014 PH: 07 3266 3999 FAX: 07 3266 5234

Townsville

20 Civil Road, Garbutt, QLD, 4814 PH: 07 4779 1366 FAX: 4779 1316

Download supporting documentation from the Titus Tekform website titustekform.com.au

12.29

po on

Connectors

Drawers

Assembly systems

ies

Dampers

log

Co m

Tooling

isi

nts

Die casting

Damped components

Damped hinges

Titusonic FastFit

Furniture Hardware

Components

Technologies

· Cabinet connectors · Concealed hinges · Soft closing systems · Drawers and drawer systems · Kitchen accessories · Furniture locks · Decorative

· Dampers · Precision components

· Automation systems · Precision castings · Die cast technologies · Tooling · Ultrasound fastening technology · FastFit technology

0.10

Worldwide design, manufacturing and distribution capabilities Titus Tool Company Ltd. Titus International Ltd. Titus Tool Company Inc.

TitusPlus Italia S.r.l.

Titus Polska Sp. z.o.o.

TitusPlus Iberia SLU CRO-Lama Titus Tool Company Inc.

Titus d.o.o. Dekani TitusPlus d.o.o. Lama Avtomatizacija d.o.o.

Titus Furniture Fitting Trading (Shenzhen) Ltd.

Titus Tool Company Pte. PT Titus Tekform Indonesia

Titus Tekform Pty Ltd

Stefano Orlati Ltd

Australia New South Wales

Tasmania

Titus Tekform Pty Ltd 83 Jedda Road Prestons, NSW, 2170 salessyd@titusplus.com

Titus Tekform Pty Ltd 88 Hopkins Street Moonah, TAS, 7009 salestas@titusplus.com

Titus Tekform Pty Ltd Unit 3, 100 Munibung Road Cardiff, NSW, 2285 salesnc@titusplus.com

Victoria

Titus Tekform Pty Ltd Cnr Heffernan & Brookes Street Mitchell, ACT, 2911 salessyd@titusplus.com

Queensland Titus Tekform Pty Ltd 76 Northlink Place Virginia, QLD, 4014 salesbris@titusplus.com Titus Tekform Pty Ltd 20 Civil Road Garbutt, QLD, 4814 salestvl@titusplus.com

South Australia Titus Tekform Pty Ltd PO Box 357 Bayswater, VIC, 3153 salessa@titusplus.com

Titus Tekform Pty Ltd 8/59 Jersey Road Bayswater, VIC, 3153 salesmel@titusplus.com Titus Tekform Pty Ltd 2/24 Kane Road Wodonga, VIC, 3690 saleswod@titusplus.com

Western Australia

New Zealand Auckland Stefano Orlati Ltd 34 Waipareira Avenue Henderson, Auckland, 0610 +64 9 837 0886 +64 9 837 8003 Fax nisales@stefano-orlati.co.nz

Christchurch Stefano Orlati Ltd 162 Wordsworth Street Sydenham, Christchurch, 8023 +64 3 981 8518 +64 3 942 7296 Fax sisales@stefano-orlati.co.nz

Titus Tekform Pty Ltd Biemelâ&#x20AC;&#x2122;s Cabinet Hardware 5/2 Wittenberg Drive Canning Vale, WA, 6155 saleswa@titusplus.com

New Zealand

Australia

Titus Group

www.titustekform.com.au info@titustekform.com.au 1300-0-TITUS

Headquarters

www.stefano-orlati.co.nz stefano-orlati@titusplus.com

Titus International Ltd 325 Euston Road London NW1 3AD, United Kingdom info@titusplus.com www.titusplus.com info@titusplus.com