Titus Group Product Catalogue
Titus Damper Multi-purpose Damping Technology
2026
Titus Damper Multi-purpose damping technology for high-volume applications
Cold/hot environment friendly
Fully controllable damping curve
Force and performance consistency
ART - Adaptive Response Technology
Areas of Application Cabinet hardware
Concealed and long lasting
Home and commercial appliances
Cold-hot environments resistant
Sanitary equipment
Humidity resistant
Architectural
Heavy-duty and reliable
Automotive and aerospace
Consistent quality and high performance
Health and recreation
Hygiene-compliant and chemical-resistant
Cabinet hardware
S Series dampers
L Series dampers
Home and commercial appliances
Sanitary equipment
Architectural
S Series dampers
L Series dampers
Automotive and aerospace
Health and recreation
Quick Development of Custom Solutions Titus Dampers are linear hydraulic damping solutions that effectively decelerate objects under forces up to 1000N and temperature range from -30°C to +150°C.
Damper force up to 1000N Damper stroke
Efficient modular damper’s design enables quick customisation adjusted according to damping force, stroke, characteristic, type of self-closing mechanism and damper connection.
6mm to 100mm
Diameter of body 8mm to 13mm Temperatures -30°C to +150°C
Cold/hot environment friendly
Fully controllable damping curve
Force and performance consistency
ART – Adaptive Response Technology
· Efficient performance across a temperature range from -30°C to +150°C
· Precise definition of forces over the whole damping curve
· Reliable performance during the whole life cycle of the application
· Fine-tuning of performance to specific applications
· Increases the application lifetime
· Dynamic damping response adjusts damper performance based on door weight and closing speed and prevents rebound · Effortless opening with low force assured
The Scope S Series Dampers with short stroke
Fine tuning options for damping characteristics
L Series Dampers with long stroke
Damping force
Flat damping curve
Stroke
Uniform damping at a defined closing speed
Usage in:
objects with rotational or linear motion
objects with linear motion
Operating temperature:
from -30°C to +150°C
from -30°C to +85°C
Damping force
Ramp damping curve
Stroke
Progressive damping at a defined closing speed Diameter of body:
8 - 13mm
8 - 9mm
Length of stroke:
6 - 16mm
35 - 100mm
Damping force:
up to 1000N
up to 25N
Damping characteristic:
flat
ART - Adaptive Response Technology
Damping force
Damping force
Flat with final Release damping curve
Stroke
Uniform damping at defined closing speed, with reduced force or nearly no force near the end position
Damping force
ART curve
Stroke
Closing speed
Damping force
MultiStage damping curve Flat curve
Stroke
Controlled multi-stage closing: initial low force prevents re-bounce, followed by higher force for efficient deceleration
Technical Details L Series damper
-30 °C Dimensions
L Series 8-35
85 °C
*Damping force at v=1000mm/min
Max. stroke X (mm)
from 3.8 to 7
35
from 3.8 to 15
45
from 5 to 15
50
X
ø 8.5
ø 7.9
80
10
L Series 8-45 X
ø 8.5
ø 7.9
80
13.5
L Series 8-50 X
ø 8.5
ø 7.9
96.5
6
Body made of plastic, piston rod made of steel
*Damping force at closing speed refers to the force a damper applies to slow down an object moving at a velocity of 1000mm/min
L Series damper
.7
5
13 ø4
ø 8.9
X
ø4 4.5
ø3.4
ø3
ø2
.7
5
4.5
ø5.8
Rubber tip
ø5.8 Adapter 5
4.5
Rubber tip ø5.5
ø4
ø6.3 ø3.4
ø4
.43
15 ø4
ø5.5
ø4
11.3
ø4
Adapter 6
*Damping force at closing speed refers to the force a damper applies to slow down an object moving at a velocity of 1000mm/min
ø5.8
ø4
9.9
.7
9
.7
13
9
ø2
.9
ø2
4.5
ø4
10.1 ø3 100
11.3
ø4
9
ø4
Adapter 4 ø3
4.5
4.5
.9
ø3
from 7.5 to 25 5
2.8 10.1
.7
ø4
6
ø2.8
ø4
5
2.8 10.1
L Series 9-100
ø4
ø4
ø4
.9
.7
ø3
6
ø4
.7
ø3
6
4.5
11.3
ø4
Adapter ø2.8 3
ø 8.9
15
.7
8.2 8.4
ø4
75
ø2.8
ø2
13
9
ø4
X
117.8
9
ø3
ø4 .9
4.5
2.8
from 2 to 22.5
ø4
ø4
5
2.8 10.1
L Series 9-75
.7
ø3
6 Adapter 2
ø2.8
Body made of plastic, piston rod made of steel
ø3
2.8 10.1
6
150.8
6
ø2.8
Adapter 1
X
L Series 9-75/100
ø4
50
L Series 8 & 9-50
ø6.3 ø3.4
9.9
from 2 to 22.5
Adapters
ø9
ø 8.6
92
Max. stroke X (mm)
11.3
L Series 9-50
*Damping force at v=1000mm/min
13
Dimensions
Technical Details S Series damper
-30 °C 150 °C Dimensions
S Series 8 42
*Damping force at v=740mm/min
Max. stroke X (mm)
from 5 to 60
16
from 10 to 440
15
from 400 to 1000
14
ø 8.4
X
ø 8.8
0.5
S Series 10 X
ø 10
42.2
0.5
S Series 13 X
ø 12.7
50
2
Body made of plastic, piston rod made of steel
*Damping force at closing speed refers to the force a damper applies to slow down an object moving at a velocity of 740mm/min
Engineered for Purpose Titus is committed to providing its customers with products and services that improve their competitiveness, while reducing manufacturing and assembly costs.
Titus Group / titusplus.com
TitusDamper 01.1 Eng Jun26