SECTION
TROUBLESHOOTING AND SERVICE
TIGÉ MAINTENANCE SCHEDULE
DAILY
WEEKLY
Check transmission
Check water pickups for debris or marine growth
If equipped with a strainer, check and clean
If operated in salt water, flush engine/cooling system and boat
REGULAR
ANNUAL
12
EVERY 2 YEARS
220HRS.
IF PROPELLER STRIKES AN OBJECT, INSPECT DRIVE TRAIN IMMEDIATELY!
270-HOUR SERVICE REQUIREMENTS This service must be performed to keep warranty active. Engine oil and filter must be changed every 50 hours. Please see your dealer. TIGÉ MAINTENANCE SCHEDULE Smell bilge area for fuel vapors
DAILY
WEEKLY
REGULAR
ANNUAL
EVERY 2 YEARS
270HRS.
Check and tighten all steering system bolts and connections
Check rudder, tiller arm bolt and safety setscrew
Lubricate rudder stuffing box and steering support tube
Lubricate cables
Replace cables
If stiffness continues after lubricating
Check bilge pump operation
Check blower operation
Inspect shaft seal Check shaft alignment/ensure it is within 0.003"
© 2003-2019 Ken Cook Co.
Watersport Tow Boats l 12-11