42 Collagen BodyWave
Use - 7
SCREEN 19 (only visible if remote control type 1 or 2 is enabled) This screen is used to set the type of input signal (default = continual). To change the setting, press ENT (‘C’ button), then “<” and “>” (‘A’ or ‘B’ button), and finally MEMO (‘C’ button changes its label in MEMO) to save. “PARAMETER PROGRAMMED” appears on the display. Press ESC (‘D’ button) to return to the screen.
IN signal: <
Continual >
ENT
ESC
Press “>” (‘B’ button) to move to screen 20. SCREEN 20 (only visible if the remote control is enabled) This screen is used to set the type of output signal (default = pulse). To change the setting, press ENT (‘C’ button), then “<” and “>” (‘A’ or ‘B’ button), and finally MEMO (‘C’ button changes its label in MEMO) to save. “PARAMETER PROGRAMMED” appears on the display. Press ESC (‘D’ button) to return to the screen.
OUT signal: <
>
Pulse ENT
ESC
Press “>” (‘B’ button) to move to screen 21. SCREEN 21 (only visible if the remote control is enabled) This screen is used to set time 1 of the input signal, default = 1.3 s. To change the setting, press ENT (‘C’ button), then “<” and “>” (‘A’ or ‘B’ button), and finally MEMO (‘C’ button changes its label in MEMO) to save. “PARAMETER PROGRAMMED” appears on the display. Press ESC (‘D’ button) to return to the screen.
T_IN1: <
1,3s >
ENT
ESC
Press “>” (‘B’ button) to move to screen 22. SCREEN 22 (only visible if the remote control is enabled) This screen is used to set time 2 of the input signal, default = 3 s. To change the setting, press ENT (‘C’ button), then “<” and “>” (A’ or ‘B’ button), and finally MEMO (‘C’ button changes its label in MEMO) to save. “PARAMETER PROGRAMMED” appears on the display. Press ESC (‘D’ button) to return to the screen.
T_IN2: <
03s >
ENT
ESC
Press “>” (‘B’ button) to move to screen 23. SCREEN 23 (only visible if the remote control is enabled) This screen is used to set the time of the output signal generated when the START button is pressed, default = 2s. To change the setting, press ENT (‘C’ button), then “<” and “>” (‘A’ or ‘B’ button), and finally MEMO (‘C’ button changes its label in MEMO) to save. “PARAMETER PROGRAMMED” appears on the display. Press ESC (‘D’ button) to return to the screen.
T_ OUT1: <
02s >
ENT
ESC
Press “>” (‘B’ button) to move to screen 24.
Rev.02 del 30.09.08
39