42 Collagen BodyWave
Use - 7
SCREEN 5 When the session time has elapsed or if the STOP (‘C’ button on screen 2) is pressed, the system moves to screen 5. During this phase, the ANTIAGE lamps are switched off and the maximum speed of the cooling and wall fans is set. “Cooling” is visualised on the display. When the cooling time has elapsed, the fans stop and the INITIAL SCREEN appear. At this point, the appliance is ready to begin another aesthetical treatment.
COOLING
7.3.3.
ANTIAGE operating sequence with Beauty Vibro Plate Plus (vibrating plate) With the Beauty Vibro Plate Plus enabled, 7 different treatments are available: 1) 2) 3) 4) 5) 6) 7)
ANTIAGE; ANTIAGE+ANTICELL; ANTICELL; ANTIAGE+SLIMMING; SLIMMING; ANTIAGE+TONING; TONING;
ATTENTION: Beauty Vibro Plate Plus session time lasts 15 minutes and cannot be changed. INITIAL SCREEN This is the screen that appears when the machine is switched on.
(welcome message)
START Press START (‘C’ button) to move to screen 7. SCREEN 7 This screen is used to select (pressing the buttons ‘A’ or ‘B’) the required treatment: ANTIAGE, ANTIAGE+ANTICELL, ANTICELL, ANTIAGE+SLIMMING, SLIMMING, ANTIAGE+GYM and GYM.
A-AGE+TONING <
OK
>
ESC
Press OK (‘C’ button) to confirm the choice of treatment and move to screen 8, press ESC (‘D’ button) to return to the initial screen. SCREEN 8 In this screen, the chosen Beauty Vibro Plate Plus treatment (if selected) appears to the left, the duration of the session appears in the centre (duration of the lamps session if ANTIAGE only or platform + ANTIAGE has been selected, duration of the platform treatment if platform only has been selected) and A-AGE (if selected) appears on the right.
TONING
15
A-AGE
START Press START (‘C’ button) to begin the session and move to screen 9, hold down the ‘D’ button for 5 seconds to return to screen 7.
Rev.02 del 30.09.08
31