Appendix
Appendix Messages for audio functions
Built-in CD drive Message
Cause
Error-11, 12, 17, 30
Dirty
Clean the disc.
Scratched disc
Replace the disc.
Error10, 11, 12, 15, 17, 30, A0, CHK CDCORE
Electrical or mechanical
Turn the ignition switch OFF and back ON, or switch to a different source, then back to the CD player.
Error-15
The inserted disc does not contain any data.
Replace the disc.
Error-23
The CD format cannot be played back.
Replace the disc.
Error-22
The inserted disc does not contain any files that can be played back.
Replace the disc.
No Audio
The inserted disc does not contain any files that can be played back.
Replace the disc.
TRK Skipped
The inserted disc contains files that Replace the disc. are protected by DRM.
Protect
All the files on the inserted disc are secured by DRM.
Replace the disc.
Heat
The temperature of the navigation system is outside of the normal operating range.
Wait until the unit’s temperature returns to within normal operating limits.
Appendix
When problems occur in the audio source, a message may appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest Pioneer Service Centre.
Action (Reference)
USB/iPod Message
Cause
Action (Reference)
No Audio
The connected USB storage device does not contain any files that can be played back.
Store playable files.
Protect
All the files on the inserted external Store playable files. storage device are secured by DRM.
TRK Skipped
The protected files are skipped.
Check USB
The USB connector or USB cable is Confirm that the USB connector or USB short-circuited. cable is not caught in something or damaged.
Store playable files.
The connected USB storage device Disconnect the USB storage device and do consumes more than 500 mA (maxi- not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect the mum allowable current). compliant USB storage device. Error-A1
The connected USB storage device Disconnect the USB storage device and do consumes more than 500 mA (maxi- not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect the mum allowable current). compliant USB storage device.
Engb
117