Standard Implants Ø 3.3 mm Regular Neck Ø 4.8 mm
Art. No.
Article
Dimensions
Material
Price $ SLActive / SLA
SLActive ®
SLA®
033.131S
043.906S
Standard implant
SLActive/SLA 8.0 mm
titanium
425 / 355
033.132S
043.907S
Standard implant
SLActive/SLA 10.0 mm
titanium
425 / 355
033.133S
043.908S
Standard implant
SLActive/SLA 12.0 mm
titanium
425 / 355
033.134S
043.909S
Standard implant
SLActive/SLA 14.0 mm
titanium
425 / 355
033.135S
043.910S
Standard implant
SLActive/SLA 16.0 mm
titanium
425 / 355
048.371S
RN Closure cap, small
height 0 mm
titanium
60
048.371V4†
RN Closure caps, small (pack of 4)
height 0 mm
titanium
150
048.373S
RN Closure cap, large,
height 1.5 mm
titanium
60
048.373V4†
RN Closure caps, large, (pack of 4)
height 1.5 mm
titanium
150
048.028S
RN Healing cap, labial
height 2.0 mm
titanium
60
048.029S
RN Healing cap, labial
height 3.5 mm
titanium
60
048.033S
RN Healing cap
height 2.0 mm
titanium
60
048.034S
RN Healing cap
height 3.0 mm
titanium
60
048.037S
RN Healing cap
height 4.5 mm
titanium
60
Closure caps and healing caps SURGERY
S = Sterile † = Sterile
4.8 mm 2.8 mm
SLActive®/SLA®
3.3 mm 2.8 mm
Applications Standard titanium implants Ø 3.3 mm RN are an alternative in the case of a minimal ridge width of 5.5 mm and a minimal mesio-distal gap width between adjacent teeth of 7.0 mm. Due to their lower mechanical strength, compared to Ø 4.1 mm implants, these implants should be used exclusively for the following situations: – Edentulous jaw: 4 implants S/SP Ø 3.3 mm RN in conjunction with a bar construction – Partially edentulous jaw: In the case of fixed reconstruction, combined with Ø 4.1 mm implants and splinted with a superstructure – As a general rule, always use the largest possible implant diameter. Caution Placement in the molar region is not recommended. 17