9 minute read
PRODUCT SHOWCASE
PRODUCTSHOWCASE
WANT TO BE FEATURED?
Send your latest product information to editorial@indmacdig.com
IMD's Monthly Product Showcase features the latest from some of the manufacturing industry's top suppliers.
The SUHNER Robotools For Fully Automated Manufacturing Today, most robot guided grinding and polishing machine tools are operated by air. Often, considering a 24-hour operating environment, these machines reach their limits. Frequent service interruptions, plus extremely high air consumption add to energy cost that also will affect profitability. In addition, air driven tools drop in speed when under load which can contribute to an adverse effect to the surface finish. Depending on surface quality requirements, the rotation of the grinding or polishing tool often requires clock- and counter clock rotation which an air driven tool can’t accomplish. All of these critical requirements can be met with the newly designed servo driven tools from SUHNER either in standard or orbital design version.
» For more information, visit suhner-machining.com AMADA WELD TECH INC Introduces AC Inverter Welding Power Supplies The MIB-300A and MIB-600A AC Inverter Welding Power Supplies offer increased control resulting in more exact heat input and betterquality welds as compared to traditional AC weld controls. The AC inverter uses inverter technology with pulse width modulation (PWM) to produce and simulate an AC waveform. Unlike AC welders that use line frequency and depend on well-regulated facility power, the AC inverter can produce an AC frequency from 50 Hz to 500 Hz allowing more precise energy delivery in less time, is not affected by line voltage fluctuation, and provides a balanced three phase load.
ABB Makes Manufacturing More Sustainable By Recycling and Remanufacturing Thousands of Old Robots Remanufacturing enables existing robot users to sell inactive or legacy robots to ABB with an attractive buy back service, rather than scrapping them or leaving them unused in a corner of the factory. As well as previously owned robots, peripheral equipment such as controllers and manipulators are refurbished to “like-new” conditions at one of ABB’s Global Remanufacture & Workshop Repair Centers. Each remanufactured robot can also be upgraded to the latest controller, which unlocks new functionalities such as ABB Ability Connected services or the latest version of RobotStudio ® , ABB's simulation and offline programming software.
» For more information, visit www.amadaweldtech.com
Combi-CS Pedestrian Stacker Wins Prestigious IFOY Award Combilift won the Warehouse Truck Lowlifter Category with its innovative Combi-CS pedestrian counterbalance stacker. The Combi-CS is the only pedestrian counterbalance stacker that will operate in a conventional reach truck aisle for space saving and productive storage and handling. It features Combilift’s unique, internationally patented and award winning multi-position tiller arm which can be turned to the left or right of the unit to position the rear drive wheel, allowing the operator to remain in the safest position- at the side of the machine rather than at the rear as is the case with other pedestrian stackers. AMI Launches M317, A Next-Generation Orbital Welding Controller With Touchscreen Interface, Data Analytics AMI, an ESAB brand, has launched its Model 317 Orbital Welding Controller. Designed for applications in the semiconductor, pharmaceutical, aerospace, nuclear and other premium pipe fabrication operations, the M317 contains the most modern controls and interface technology to simplify automated welding. This next generation orbital TIG welding system offers an unrivaled user experience through an advanced touchscreen that allows users to better control the weld, improving performance and increasing production efficiency. In welding mode, a data analytics engine provides live data, while cameras offer a live view of the weld.
» For more information, visit www.combilift.com
Coxreels Offers a Variety of Stainless Steel Coxreels is pleased to offer various stainless steel grade choices to their customers, ideally servicing exact specification needs. Coxreels offers complete stainless steel reels and powder-coated steel reels with stainless steel fluid paths. Now customers can choose between 316 and 304 grade stainless steels for their fluid paths on many reel types to best match the necessary corrosion resistance of their reel according to the application. Coxreels stainless steel reel spools and frames will remain 302/304 grade stainless and are optionally available in an electro
» For further information, visit www.coxreels.com
C-FRAME PRESSES
polished finish for additional corrosion resistance.
Heavy Gauge Steel Design Press Bed bolted on, not welded, to prevent distortion. Large press bed to accommodate a variety of tooling other than just punching. Pump, motor, valve and reservoir are all easily accessible for maintenance. Large rectangular tubes used at base of machine to give safe, instant portability.
WE CAN BUILD A CUSTOM MACHINE FOR YOU!
5806 Quality Ridge Rd | Coggon, IA 52218 Phone: 319.435.2378 | Fax: 319.435.2262 www.betenbender.com
New Product From oelheld For The Hollow Structural Sections (HHS) Manufacturing Community With the enthusiastic response from HSS costumers to oelheld’s new SintoGrind HSS-X 1400 grinding fluid, oelheld claims that HSS manufacturers have long been neglected by grinding fluid manufacturers. There are simply no true performance oils available for the HSS market, in spite of the well-known fact that a performance grinding oil can have a huge impact on production efficiency and output. SintoGrind HSS-X 1400 is formulated with modern GTL (gas to liquid) base oils. It is suitable for flute, thread, profile, internal and external cylindrical grinding of steel materials such as HSS, PM and medical steels.
» For more information, visit www.oelheld.com
Fastest, Most Accurate Bar Puller On The Market
• NO MECHANICAL ADJUSTMENT NECESSARY
(X axis end point gets changed in the program when changing bar diameters)
• ONE TIME SETUP
• NEVER NEEDS ADJUSTMENT
•CHANGE BAR SIZE IN SECONDS (BY CHANGING “X” VALUE IN
PROGRAM)
• EXTREME REPEATABILITY
RESULTS IN LESS MATERIAL
WASTED PER PART
• NO GRIPPING FINGERS TO ADJUST, LOSE OR BREAK • EZ-PULLER WORKS ON
ROUND, HEX AND SQUARE
STOCK.
RANGE:
.093″ – 1.750″ ROUND STOCK .125″ – 1.375″ HEX STOCK .125″ – 1.000″ SQUARE STOCK
Watch the video now at: ezpullerusa.com CNC Vertical Turret Milling Machines from Palmgren Designed for more complex workpieces, the CNC Vertical Turret Milling Machines offer strength and rigidity while providing greater versatility. The Turret Milling Machines from Palmgren are a cost-effective solution for every milling need. The milling machines produce more parts, faster and with better tolerances than standard manual machines. Another key feature is the Fagor Automatic controls that offer the most cost-effective solution in chip making profitability. This combination ensures faster programming, set-up and machining. Other features include variable speed drive, a heavy-duty spline motor drive system and vent air cooling system. Palmgren, now in its second century, is a C.H. Hanson brand.
» For more information, visit www.palmgren.com
Scotchman Industries Introduces The Accu-Table Digital Caliper Measuring Table With + .004 Accuracy
With measuring accuracy to .004” over 10’ this digital caliper measuring table provides repeatability to +.0015”. Accu-Table simplifies the quality control process of measuring overall part dimensions and is ideal for Fabrication shops, machine shops and anyone needing to critically measure long parts. Accu-Table easily makes critical quality control measurements of material up to 16 foot lengths. Using the measuring system’s Windows ® Tablet PC, accurate inch/metric readings are calculated and stored for future reference. Also, the measuring information can be stored and accessed wirelessly over a network using Wi-Fi, Bluetooth or USB.
» For more information, visit www.scotchman.com
by
60 Day Money Back Guarantee - 2 Year Warranty!
“Absolutly, no time. Zero time adjusting the tool.” - Randy, CNC Lathe Programmer
New Antimicrobial Sponge Rubber from Trim-Lok Trim-Lok announces new Antimicrobial Sponge Rubber that not only meets DIN EN ISO 846 requirements but is also FDA compliant. Applications include use anywhere that the growth of bacteria on the surfaces must be prevented. Common applications include gaskets and seals used in medical, hospital, HVAC, refrigeration, transportation, food, pool, gym, and parks and playground equipment, and more. If your product will come in contact with skin, such as masks for face shields, Trim-Lok also has a line of antimicrobial sponge rubber gaskets and seals that are both EPA and FDA compliant.
» For more information, visit www.trimlok.com
Ultimaker Launches Ultimaker Essentials, Ultimaker Essentials enables companies to incorporate 3D printing in existing IT infrastructures and allows for seamless distribution and updating of 3D printing software. The paid subscription-based software offering addresses several glaring IT pain-points, including the need for improve management across workflows and the knowledge gap that exists in the manufacturing industry. Ultimaker Essentials also includes a brand-new direct support function and a catalogue of verified plugins to help effectively scale 3D Printing outputs. Subscribing to Ultimaker Essentials provides organizations with an enterprise grade solution for adopting a full 3D printing infrastructure. Users also have access to three eLearning courses from the Ultimaker 3D Printing Academy. New Gear Motor Drive From Siemens Siemens introduces the Sinamics G110M, a motor-integrated drive for Simogear gear motors, offering flexible control, integrated safety, simple installation and a space-saving design. With a high degree of protection, up to IP66, this new gear motor drive provides the perfect solution to most material handling-related challenges, including conveyors, warehousing, logistics, baggage and cargo handling, post and parcel shipping, plus numerous industrial applications in the automotive, appliance and test stand industries. Simogear gear motors offer high torque density, low noise and high efficiency, and now with Sinamics G110M, it becomes easier for designers and system builders to integrate gear motors into a variety of control architectures.
» For more information, visit www.siemens.com
SPRINTER MACHINES…
• Provide reliable, low cost, ink code marking. • May be mounted in any orientation. • The sealed ink system allows discontinuous operations with immediate start-up of comparable previous impressions. • Can be modified or made to order for your particular marking application.
Model 22 Pass/Fail Dot Marking Machine
INDUSTRIAL INK MARKING SYSTEMS
SPRINTER MARKING supplies all the basic, optional and auxiliary equipment, as well as, operating supplies for normal code-marking operations.
