Console Port Login Configuration
13
Figure 4 Set port parameters
■
Turn on the switch. The user will be prompted to press the Enter key if the switch successfully completes POST (power-on self test). The prompt (such as <S4200G>) appears after the user presses the Enter key.
■
You can then configure the switch or check the information about the switch by executing commands. You can also acquire help by type the ? character.
Console Port Login Configuration Common Configuration
Table 12 lists the common configuration of Console port login. Table 12 Common configuration of Console port login Configuration Console port configuration
Description Baud rate
Optional The default baud rate is 9,600 bps.
Check mode
Optional By default, the check mode of the Console port is set to “none”, which means no check bit.
Stop bits
Optional The default stop bits of a Console port is 1.
Data bits
Optional The default data bits of a Console port is 8.
AUX user interface configuration
Configure the command Optional level available to the By default, commands of level 3 are available to the users logging into the users logging into the AUX user interface. AUX user interface