Every iron is tested before leaving the factory.
The Swix Waxing Irons T70, T71, T72 and T73 utilize the newest technology in iron heating elements. These are manufactured in a completely new way from traditional heating elements. A thick, film-type heating element is actually “printed” onto an insulated metal or ceramic base plate, a layer of special resistive paste is added, and finally a second layer of insulated metal or ceramic. What this means is excellent resistance to corrosion for long life.
Fix a length of Fiberlene paper in the clips. Use enough to cover the base plate. Make one pass of about 25 seconds from tip to tail. For snowboards repeat the tip to tail pass until the entire base is ironed. The paper will absorb excess wax and dirt from the base. Let the skis or board cool. That’s it!
60
Swix Hardgoods 16/17
0.00000
T0153 FIBERLENE PRO PAPER To be used between iron and base. Protects the base from overheating colder waxes. Absorbs dirt and excess wax. Leaves a thin and uniform waxlayer. Min. 12.
In very cold conditions light brushing is useful else no need for scraping or brushing. T77110 / 110 VOLT T77220 / 220 VOLT WAXING IRON ECONOMY Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Output: 1000W.
MAINTENANCE OF T70 WAXING IRON
T72110 / 110 VOLT T72220 / 220 VOLT “T72” RACING DIGITAL IRON 550 Watt. A 12 mm plate gives optimal temperature stability. The iron is controlled by a micro processor and has digital temperature regulation. Temperature adjustment from 110°C to 170°C. On the back, the heating plate has an angle to facilitate application of Cera F. In front it is straight to control glide zone waxing and classical skis.
750.0
FAST CLEAN IRON METHOD This is a simplified method to apply glide waxes without scraping or brushing.
It is important to take care of the waxing iron. Just a like a car or a bicycle, the iron needs to be maintained. This will secure better performance and longer life. If you do not follow these guidelines, the guarantee is no longer valid: • Do not leave the iron at high temperatures when not in use. Adjust down to 120°C or turn it off. Particularly important after waxing with Cera F powders at high temperatures. • Always clean the iron with fiberlene paper after use. If not, small wax particles will remain on the iron giving out fumes. Over time the wax particles will fasten to the iron and make it black. • If the iron becomes black, polish the plate with orange fibertex. • Try to avoid getting wax between the metal plate and the plastic top. • When the iron is not in use keep it in upwards position: The upward position is important as it reduces the heating of the inside electronics. • Place the iron where it is safe for not falling to the ground; The new iron holder for T70-H2 is recommended. • If you have scratches in the base plate, use a fine sanding paper like grit 500. • Be careful with use of solvents as this can have impact on the inside components. • Hold the iron in the handle, never lift it by the cord. • Avoid unnecessary bending of the cable, as it over time can lead to breakage of the cable.
37.5
T74110 / 110 VOLT T74220 / 220 VOLT “74” SPORT WAXING IRON 400 Watt. 110 volt for USA, Canada and Japan. Reasonable and reliable waxing iron with temperature control showing the degrees. Standard iron plate. Control light for temperature regulation. With clips for attaching Fiberlene paper when using the “Fast Clean Iron Method”.
PATENTED TECHNOLOGY IN SWIX WAXING IRONS!
T71110A / 110 VOLT T71220A / 220 VOLT “T71” ALPINE WORLD CUP WAXING IRON For professional racing. 1000 Watt. 50% textured in front. “Floats” better when working with regular waxes on large bases. Angled in front and back. Rounded corners for smooth application. A 25 mm thick plate gives stable temperature and optimal control when applying Cera F. Temperature adjustment from 80°C to 180°C. Easy to set temperature with LED buttons.
08102907
FAC TS
750.0
1000
T70110 / 110 VOLT T70220 / 220 VOLT “T70” EXTREME WAXING IRON For World Cup technicians and other perfectionists that demands the best regardless of cost. 1000 Watt. • A 35 mm thick plate gives stable temperature and optimal control when applying Cera F and other waxes. • Temperature adjustment from 80°C to 200°C. • The sensor is fixed close to the bottom to secure correct temperature. • Angle on heating plate of 7° facilitates optimal application of Cera F powder. • Clear view to back and front of iron plate makes it easy to work with in both directions. • Width of 70 mm gives better control on cross country skis. • Ergonomic handle.
WAXING IRONS – SPORT AND ECONOMY
1000
08102907
WAXING IRONS – RACING PRO WORLD CUP
ALPINE / NORDIC / SNOWBOARD
0.00000
ALPINE / NORDIC / SNOWBOARD
FAC TS
0.00000
37.5
0.00000
R0384 IRON COVER Protects iron when traveling. Keeps cord and iron together. Heat resistant bottom for quick stow away. Fits all Swix Irons.
Notes:
T73110 / 110 VOLT T73220 / 220 VOLT “T73” PERFORMANCE WAXING IRON 500 Watt. 8 mm plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustmentwheel. Adjustment range from 100°C to 165°C. Wax-guide with the right temperature setting for Cera Nova X waxes included.
Swix Hardgoods 16/17
61