www.PureServicePro.com
Services Of Pure Service Pro
Basement Waterproofing.
Interior Water Proofing System
Exterior Water Proofing System
Crawlspace Repair
Foundation Repair
Mold
Mold inspection
Mold testing
Mold remediation
Water damage
Why We are the Best!
ADVANTAGE • Available 24/7. Local Certified Restoration Specialists in all NJ and PA • Direct Insurance Billing • IICRC Certified Company & Staff • Flexible Payment Options: 0% Interest & SAME AS CASH Financing Available • Transferable Lifetime Warranty
Basement Waterproofing Interior Water Proofing System- Â ďƒź Interior Basement Waterproofing system, floor is opened next to the outside walls, and drain pipe is installed and surrounded by gravel.
Exterior Waterproofing Exterior Waterproofing Waterproofing the exterior of a foundation completely eliminates water and moisture penetration through the walls into a basement. For a basement to be waterproofed with no chance of water penetrating the exterior walls, it needs to have protection from sub-surface water for all of the below grade walls. All of this protection must span from grade level down to the foundation footing or a depth deeper than the basement floor.
Crawlspace Repair 1.
Moisture on walls, dirt floor or plastic barrier appears from excess humidity or condensation.
2. Water enters thru the ground from hydrostatic pressure (build up from below forced into the crawlspace). 3. Water enters thru the cracks, seams or other penetrations in walls due to water draining. 4. Water flows over the top of the walls because of improper grading or improper sealed porches or additions
Crawlspace Repair
Foundation Repair
There are many issues that can lead to cracks in concrete basement floors. While poured concrete is generally considered the best, it is still prone to cracking due to the curing process and settling that happens over time. Basement floor cracks are almost never structural issues but are a huge source of excessive moisture and humidity. Basement floor cracks are usually repaired prior to basement finishing. Floor cracks are a source of excessive moisture, an enemy of a finished area.
Mold Inspection Mold should not be permitted to grow and multiply indoors. When this happens, health problems may possibly occur and building materials, goods and furnishings may be damaged.Â
Mold Testing
Mold Testing-If the mold damage was caused by sewage or other contaminated water, then call in a professional‌ Even clean water will fuel mold if left standing
Mold Remediation 1. Remove surface micro fungus. 2. Prevent fungal recurrence. 3. Re-establish a healthy indoor environment for occupants. 4. Restore affected building and contents to pre-loss condition or better. Airborne mold from the air and interior surfaces.
For more detail go to websitewww.PureServicePro.com THANK YOU