Digital position indicator DA 3
New accessories for PD 400/CNC and FF 500/CNC
For our MICRO Miller FF 500 and other lathes and milling machines. MICROMOT adapter To be used for high-speed MICROMOT appliances in combination with the MICRO Miller FF 500. And especially for use with the MICRO Miller FF 500/CNC.
With large multi-function display, 3 glass rulers (with one sensor each) and the necessary fastening parts. For convenient milling through direct position measurement with zeroing.
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 50 series, the MICROMOT precision drill grinder FBS 240/E and the MICROMOT professional drill/ grinder IBS/E. Especially for applications that require high speeds for small milling cutters (example: milling electric printed boards). Also for micro drilling. Complete with fastening screws.
Mechanical play (backlash as well) is ignored. And: The revolutions of the handwheels do not have to be counted for long travel distances. Reasonable for repetitive processing: In addition to the zero point a second start point (incremental) can be set anywhere. Technical Data: Digital display 265 x 182 x 48mm for 110 – 230V. 50/60Hz. Glass rulers for travel distances: vertical (z-axis) 220mm, transverse (xaxis) 300mm, depth (y-axis) 100mm. With a 200cm metal-sheathed plug connecting line to the display.
NO 24 346
NO 24 323 Note: The relatively slender glass rulers are basically 112mm longer than the travel distances (therefore 212, 332 and 412mm) and only 17mm wide. Height including sensor: 36.5mm.
Thread cutting device for the lathe PD 400/CNC
New Products 2012
The software of the PD 400/CNC has already been programmed accordingly: Available now are the standard male threads M 1 to M 42. Special threads of any type (e.g. inch threads) can be manufactured as well with different pitches and thread depths. Including detailed assembly instructions. NO 24 506
The most important computing functions of the DA 3 system: t $BMDVMBUJPO BOE JOEJDBUJPO PG B DFOUSF QPTJUJPO t #BTJD BSJUINFUJD PQFSBUJPOT BT XFMM BT DPT TJO GVODUJPOT with transfer of values to the position indicator t 1PTJUJPOJOH PG ESJMM IPMFT PO BOZ TUSBJHIU MJOFT BOE circular paths t .JMMJOH PG DSPPLFE QMBOFT t .JMMJOH PG SBEJJ JO EJòFSFOU QMBOFT
www.proxxon.com The back page of this brochure shows two more problem solvers in matters of turning and milling. 5
PROXXON – The fine tool company !
NO 95 298 PR 702712706O ©PROXXON S.A. gesamtherstellung: steinicke, wittlich
A complete attachment kit with rotary encoder for the main spindle, belt pulleys, synchronous belts and all required accessory parts.
Tools with Character !
More power. New feeling.
Surface planer AH 80 / DM
076 4 0
7
PO 9 48 4 WI
The smallest and finest in the world ! Al l
/ DM
7 750
igh ts by PROX
r
r
igh ts by PROX
XO N
Design Patent
XO N
Design Patent Al l
The second generation of our fine power tools with head made of die-cast aluminium.
Precision lathe FD 150/E Light, sturdy and precise. For spindle speeds of 500 – 5,000rpm !
0
Al l
XO N
Design Patent r
igh ts by PROX
A suction connection with vaccum cleaner adapter permits clean working.
Sturdy, torsion-free compact housing made of glass-fibre reinforced POLYAMIDE (no shell construction). With soft components in the finger grip area. And fitted with a new special balanced DC motor. Yet more powerful, more robust and extremely smooth-running. / DM
075 5 6
4
Al l
XO N
Design Patent r
igh ts by PROX
MICROMOT drill stand MB 200 Made of die-cast aluminium parts with CNC-machined guides and fits.
Head with dovetail slideway can be tilted through 90° (scale ring available). Enables diagonal drilling and versatile milling. Strongly geared-down rack and pinion feed with return spring for more feeling with effortless drilling. Practical drill depth scale with adjustable limit stop (maximum travel 40mm). With standard 20mm collar for MICROMOT drilling and milling devices. With solid, hard-chromium plated steel column (280 x 20mm), throat capacity (column inside to centre of tool) 140mm. Flat-milled table (220 x 120mm) with parallel limit stop and scale. Drilled, tapped holes for securing the MICRO compound table KT 70 and holes to fix the drill stand itself are also provided. Weight 2.2kg.
Load bearing components are all made of die-cast aluminium with CNC-machined fits. These characteristics are essential for vibrationfree, clean planing of soft and hard woods. With flat-milled table. Right table half with fine feed using a toggle screw for chip removal from 0 to 0.8mm with a planing width of maximum 80mm. With adjustable longitudinal stop, inclinable on both sides by 45° (scale available). The heart of the machine: Large, ball-bearing planer block with exchangeable HSS blades. Low-noise drive using DC special motor with toothed belts. With practical milling protection that does not interfere during work. Main switch with emergency-stop function and restart protection. A suction connection with vacuum cleaner adapter permits clean working. Including work piece pusher. . Other technical data: 220 – 240V. 50/60Hz. Table 400 x 80mm. Planing width 80mm. Maximum depth of cut (infeed depth) 0.8mm. Blade speed 6,000rpm. Weight approx. 5.5kg. Insulated to class 1. NO 27 044
Replacement planer blades For surface planer AH 80. Of HSS steel, length 82mm. With fastening screws. NO 27 046
For facing and longitudinal turning, for boring, taper turning, slicing and drilling. The unusually high maximum spindle speed enables the lathe to manufacture even parts with very small diameters. Machine bed with dovetail slideway made of continuous-cast aluminium. Die-cast aluminium headstock spindle. With quiet DC special motor, 2-stage belt drive and additional electronic speed control: For high engine power in the lower speed range (for larger work pieces) and for the appropriate speed, even for the smallest pieces. Main spindle with precision bearing with continuous 8.5mm bore. Chuck side fit for standard ER 11 type collets. Three-jaw chuck, self-centering (inside jaw 1.5 – 32mm, outside jaw 12 – 65mm). Die-cast aluminium tailstock with spindle and live centre (with MK 0/short bore). Support: To be shifted manually on the bed and clamped with lever. Rotating quick change tool post for lathe tools 6 x 6mm. Processing with top slide (60mm, travel distance Z) and cross slide (40mm, travel distance X). By setting the angle of the upper carriage it is possible to turn tapers up to +/- 45°. Handwheels with zero adjustable scale ring (1 division = 0.05mm, 1 revolution = 1.0mm). Other technical data: 220 – 240V. 50/60Hz. Distance between centres 150mm. Swing 55mm. Height over cross slide 33mm. Cross slide travel (X) 40mm, top slide travel (Z) 60mm. Steel tool holder for lathe tools 6 x 6mm. Spindle bore 8.5mm. 2-stage belt drive with electronic speed control: Stage 1 = 500 – 2,500rpm. Stage 2 = 1,000 – 5,000rpm. Dimensions approx. 360 x 150 x 150mm. Weight approx. 4.5kg.
One each boring, roughing out, parting, finishing, right and left cutter. Size 6 x 6 x 60mm (for FD 150/E). Supplied in wooden box.
NO 24 524
6 pieces
RÖHM drill chuck. Capacity 0.5 - 6.5mm. Industrial quality with extra high speed accuracy (approved up to 10,000rpm). Complete with arbor B 10 x MK 0/short. For the tailstock of the FD 150/E. NO 24 152
Multiple range type ER 11 collets (DIN 6499/B)
NO 24 150
High speed accuracy. Can be reduced to 0.5mm under the nominal diameter (intermediate sizes not required). D = 11.5mm, L = 18mm. One each of 2.0 – 2.5 – 3.0 – 4.0 - 5.0 – 6.0 and 7.0 mm are included. With clamping nut M 16 x 1. Suitable for the main spindle of the FD 150/E. Supplied in a wooden box. NO 24 154 7 pieces
2 pieces
NO 28 600 2
6-piece cutting tool set. Made of high-quality cobalt HSS steel. Ground.
3
4