Firegear Specification Book by AMD DIRECT INC.

FIREGEAR OUTDOORS FAX: (888) 672-8024 www.firegearoutdoors.com www.firegearoutdoors.com CONSERVATION WAY CA www.firegearoutdoors.com AND APPROVED BY THE PRODUCT FPB-L36MT-N FORT WAYNE, IN 46809 SELECT DESIRED SYSTEM: SELECT DESIRED SYSTEM: L SERIES MT SYSTEMS TOLL FREE: 1-888-672-8929 DESIRED LP GAS: NATURAL GAS: SELECT NATURAL GAS: SYSTEM: FAX: (888) 672-8024 NATURAL GAS: FPB-L24MT-P THESE FIRE PITS FPB-L24MT-N FPB-L24MT-N B D www.firegearoutdoors.com ARE TESTED TO C C FPB-L24MT-N FPB-L24MT-N

FPB-L30MT-N 9230

N PROFESSIONALS FOR PLANNING PURPOSES

D SYSTEM:

FPB-L30MT-N FPB-L30MT-N FPB-L30MT-P ANSI Z21.97-2014 / A FPB-L30MT-N FPB-L36MT-NCSA 2.41-2014 FPB-L36MT-N FPB-L36MT-P STANDARDS. LP GAS: LPFPB-L36MT-N GAS: REVISION DATE 06/09/2016 LPFPB-L24MT-P GAS: FPB-L24MT-P DISCLAIMER: BTU LISTINGS ARE CADdetails.com BASED ON 7.0" WC FOR NATURAL GAS FPB-L24MT-P C FPB-L30MT-P FPB-L30MT-P (NG) AND 11.0" WC FOR LIQUID A FPB-L30MT-P PROPANE (LP) AT THE BURNER FPB-L36MT-P FPB-L36MT-P 23"PROPER TYP. ORIFICE. FLEX LINE SIZE AND FPB-L36MT-P GAS PIPE SIZING WILL ALSO TOPAFFECT VIEW

A C A

2" TYP.

23" TYP. TOP VIEW B D

2" TYP.

44" CEILING B D B D 2" TYP. 17" SIDEWALL 2" TYP.

44" CEILING 17" SIDEWALL

44" CEILING 44" CEILING

1" FL TO BO OF CR

17" SIDEWALL 17" G H SIDEWALL END VIEW CLEARANCE TO COMBUSTIBLES

23" TYP. 23"VIEW TYP. TOP SIDE VIEW 44" CEILING BTU'S. AS A RESULT YOUR BTU'S MAY TOP VIEW DISCLAIMER: BTU LISTINGS ARE DISCLAIMER: BTU LISTINGS ARE P B D VARY SLIGHTLY FROM THE LISTED 1" FLOOR 1" FLOOR BASED ON 7.0" WC FORBASED NATURAL ON GAS 7.0"BTU WC LISTINGS FOR NATURAL F E E F DISCLAIMER: ARE GAS BTU SPECIFICATIONS. TO BOTTOM TO 1" BOTTOM FLOOR P (NG) AND 11.0" WC FOR(NG) LIQUID AND 11.0" WC FOR LIQUID BASED ON 7.0" WC FOR NATURAL GAS E 17" F OF CRADLE OF BOTTOM CRADLE 2" TYP. TO PROPANE (LP) AT THE BURNER PROPANE (LP) AT THE BURNER MIN/MAX MIN/MAX (NG) AND 11.0" WC FOR LIQUID P H PAN G H G PAN SIDEWALL WIDTH INSIDE INSIDE PAN OVERALL HEIGHT OF CRADLE ORIFICE. FLEX LINE SIZE AND PROPER ORIFICE. FLEX LINE SIZE AND PROPEROVERALL LENGTH OVERALL 23"AT TYP. CUT OUT CUT OUT PROPANE (LP) THE BURNER DEPTH MODEL OF CRADLE OF CRADLE LENGTH WIDTH OF APPLIANCE H G GAS PIPE SIZING WILL ALSO AFFECT GAS PIPE SIZING WILL ALSO AFFECT LENGTH LENGTH ORIFICE. TOP FLEXVIEW LINE SIZE AND PROPER SIDE VIEW VIEW CLEARANCE SIDEBVIEW END END VIEWTOECOMBUSTIBLES CLEARANCE A F TO COMBUSTIBLES G H BTU'S. AS A RESULT YOUR MAY BTU'S. AS A RESULT YOUR MAY GASBTU'S PIPE SIZING WILL ALSOBTU'S AFFECT C D SIDE VIEW END VIEW CLEARANCE TO COMBUSTIBLES AREVARY SLIGHTLY FROM THE VARYLISTED SLIGHTLY FROM THEBTU'S LISTED 6 7/8" 28 1/2" 7 1/8" 24" 6 3/8" 4 1/4" 4 3/4" FPB-L24MT-N 28 1/4" BTU'S. AS A RESULT YOUR MAY 1" FLOOR RAL GAS BTU SPECIFICATIONS. BTU E FROM FPB-L24MT-P 28 1/4"F 6 7/8" 28 1/2" 7 TO 1/8"BOTTOM 24" 6 3/8" 4 1/4" 4 3/4" VARYSPECIFICATIONS. SLIGHTLY THE LISTED D FPB-L30MT-N 34 1/4" 6 7/8" 34 1/2" 7 OF 1/8"CRADLE 30" 6 3/8" 4 1/4" 4 3/4" BTU SPECIFICATIONS. MIN/MAX MIN/MAXMIN/MAX MIN/MAX R FPB-L30MT-P 30"PAN HEIGHT 34 1/4" WIDTH 6 7/8" 7 1/8" 6 3/8" OVERALL 4 1/4" 4 3/4" PAN OVERALL LENGTH OVERALL INSIDE PAN34 1/2" INSIDEINSIDE PAN OVERALL OVERALLWIDTH LENGTH OVERALL PANPAN INSIDE HEIGHT HCUT CUT40 OUT OUT CUTGOUT CUT OUT PROPER MODEL MIN/MAX MIN/MAX FPB-L36MT-N 36" 1/4" 6 7/8" 7 1/8" 6 3/8" OVERALL 4 1/4" 4 3/4" DEPTHINSIDE DEPTH OF CRADLE OFOF CRADLE LENGTH 40 1/2"WIDTH OFPAN APPLIANCE MODEL CRADLE OF CRADLE LENGTH WIDTH OF APPLIANCE PAN OVERALL LENGTH OVERALL WIDTH INSIDE PAN HEIGHT LENGTH LENGTHCUT LENGTH LENGTH AFFECT OVERALL OVERALL MIN/MAX OVERALL 4 3/4" OUT E CUT FPB-L36MT-P 40END 1/4"MIN/MAX 6 7/8" 40OUT 1/2" F 7E1/8" G 36" 6 3/8" 4 1/4" A B H A B F G H SIDE VIEW VIEW CLEARANCE TO COMBUSTIBLES DEPTH MODEL OF CRADLE OF CRADLE D WIDTH OF APPLIANCE U'S MAY CCUT OUTLENGTH D INSIDE LENGTH LENGTH LENGTH OF WIDTH OF C BCUT OUT PAN INSIDE PAN HEIGHT OF E F G H 28 1/4" 6 7/8" 28 1/2" 6 7/8" 7 1/8" 28 C1/2" 24" 7 1/8" 6 3/8" 24" 4 1/4" 6 3/8" 4 3/4" 4 1/4" FPB-L24MT-N 28A1/4" 4 3/4" STED FPB-L24MT-N D CRADLE CRADLE LENGTH LENGTH LENGTH WIDTH PAN DEPTH APPLIANCE CONVERSION KIT MODEL BTU FPB-L24MT-P 28 1/4" 6 7/8" 28 1/2" 1/8" 28 4 3/4" 44 1/4" FPB-L24MT-P 28 7/8" 7ORFICE 28 1/2" 1/2" 1/8" 6 3/8" 24" 24" 4 1/4" 66 3/8" 3/8" 1/4"GAS TYPE NG 3/4" GAS TYPE LP 66 7/8" 77 1/8" 44 3/4" FPB-L24MT-N 28 1/4" 1/4" FACTORY BTU24" OUTPUT PRESSURE FPB-L30MT-NMODEL FPB-L24MT-P 34 1/4" 6 7/8" FPB-L30MT-N 34 7/8" C7 1/8" 28 34 1/2" 1/2" D30" 77 1/8" 1/8" 6 3/8" 3/8" 4 3/4" 44 1/4" 1/4" 3/4" H SPECIFICATIONS NO. 4 1/4" F66 3/8" A EPART30" G 28 1/4" 1/4" B 34 1/2" 66 7/8" 24" 44 3/4" MIN/MAX MIN/MAX #427 1/8"PAN34 35,000 LPK#50 MIN. 4INLET FPB-L30MT-P 30" 77 OVERALL FPB-L30MT-P 30" 4 1/4" 66 3/8" 34 1/4" 6FPB-L24MT-N 7/8" 34 1/2" 3/4" 44 1/4" 34 1/4" 1/4" INSIDE 7/8"INSIDE 34 1/2" 1/2"PAN 1/8" 6 3/8" 3/8" 1/4" 5.0" WC 44 3/4" 3/4" 10.5" WC FPB-L30MT-N 34 1/8" 30" LL LENGTH OVERALL WIDTH PAN66 7/8" HEIGHT CUT OUT CUTFPB-L24MT-P OUT #507 1/8" 34 35,000 MAX. 4INLET 10.5" WC44 3/4" 13.0" WC FPB-L36MT-N 36" FPB-L36MT-N 36" 4 1/4" 66 3/8" 40 1/4" 3/8" 30" 3/4" 4441/4" 40 1/4" 1/4"6 7/8" 40 1/2" 66 7/8" 7/8" 40 1/2" 1/2" 1/8" 624” 3/8" 1/4" 3/4"4 3/4" 34 FPB-24LMT-N 28 1/4” 6 7/8" 28 1/2” 7DEPTH 1/8" 77 1/8" 6 3/8” 1/4” CRADLE OF CRADLE FPB-L30MT-P LENGTH WIDTH OF APPLIANCE INLET LPK#48 FPB-L36MT-P 40 1/4" 6FPB-L30MT-N 7/8" 40 1/2" 66 7/8" 36" 77 1/8" FPB-L36MT-P 40 1/4" 1/4" 7/8"#387 1/8" 40 40 1/2" 1/2" 45,000 1/8" 6 3/8" 36" 4 1/4" 66NORMAL 3/8" 4 3/4" 4 1/4" 1/4" 7.0" WC 44 3/4" 3/4" 11.0" WC LENGTH LENGTH FPB-L36MT-N 36" 40 3/8" 4 A B E F G H FPB-L30MT-P C D40 1/4" FPB-L36MT-P 6 7/8"#48 40 1/2" 45,0007 1/8" 36" 6 3/8" 4 1/4" 4 3/4" LPK#44 FPB-L36MT-N #326 3/8" 55,000 6 7/8" 28 1/2" 7 1/8" 24" 4 1/4" 4 3/4" 8 1/4" FPB-24LMT-P 28 1/4” 6 7/8" 28 1/2” KIT 7CONVERSION 1/8” 24” 6 3/8” 4 1/4” 4 3/4” CONVERSION KIT MODEL BTU MODEL BTU FPB-L36MT-P #44 55,000 8 1/4" 6 7/8" 28 1/2" ORFICE7 1/8"FACTORY 24" 3/8" 4 1/4" PRESSURE 4 3/4" GAS TYPE NG GASGAS TYPE LP NG GAS TYPE LP FACTORY BTU OUTPUT PRESSURE TYPE ORFICE BTU6OUTPUT SPECIFICATIONS PART NO. SPECIFICATIONS PART NO. CONVERSION KIT MODEL 6 7/8" 34 1/2" BTU NOTES: 7 1/8" 30" 6 3/8" 4 1/4" 4 3/4" 4 1/4" GAS5.0" TYPE TYPE FACTORY BTU OUTPUT FPB-L24MT-N FPB-L24MT-N MIN. INLET 5.0"PRESSURE WC INLET 10.5" WC #42 35,000 LPK#50 MIN. WC NG GAS 10.5" WCLP #42ORFICE 35,000 LPK#50 4 1/4" 6 7/8" 34 1/2" 6 3/8" AS NATURAL 1/4" 4 BE 3/4" SPECIFICATIONS PART NO. THESE FIRE PIT 30" MODELS ARE GAS AND MUST CONVERTED TO LP FPB-30LMT-N 34 1/4” 1.7 1/8" 6 7/8” 34SHIPPED 1/2” 741/8” 30” 6 GAS. 3/8” FPB-L24MT-P FPB-L24MT-P MAX. INLET 10.5" WCINLET 13.0"10.5" WC WC #50 35,000 MAX. INLET WC4 1/4” 10.5" 13.0" WC WC 4 3/4” #50 35,000 36" FPB-L24MT-N 0 1/4" 6 7/8" 40 1/2" 7 1/8" 6 3/8" 4 1/4" 4 3/4" MIN. 5.0" #42 35,000 LPK#50 2. ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. FPB-L30MT-N FPB-L30MT-N 45,000 NORMAL INLET 45,000 NORMAL INLET LPK#48 7.0" WC 11.0" WC #38 LPK#48 7.0" WC 11.0" WC #38 FPB-L24MT-P 0 1/4" 6 7/8" 40 1/2" 7 1/8" 36" 6 3/8" 4 1/4" 4 3/4" #50 35,000 MAX. INLET 10.5" WC 13.0" WC 3. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS . FPB-L30MT-P #48 45,000 FPB-L30MT-P #48 45,000 FPB-L30MT-N NORMAL INLET 45,000 LPK#48 7.0" WC 11.0" WC #38 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. FPB-30LMT-P FPB-L36MT-N 34 6 7/8” 34 1/2” 7 1/8”LPK#44 30” 6 3/8” 4 1/4” 4 3/4” LPK#44 FPB-L36MT-N #321/4” 5. DRAWINGS 55,000 #32 55,000 NOT TO SCALE. FPB-L30MT-P #48 45,000 FPB-L36MT-P #44 55,000 FPB-L36MT-P #44IS INTENDED FOR55,000 55,000 CONVERSION KIT LPK#44 6. THIS DRAWING USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES FPB-L36MT-N #32 FACTORY ORFICE BTU OUTPUT PRESSURE GAS TYPE NG GAS TYPE LP PART ONLY. NO. THIS #44 DRAWING MAY NOT BE USED FOR CONSTRUCTION. FPB-L36MT-P 55,000 NOTES: NOTES: FPB-36LMT-N 40 1/4” 6 7/8” 40 1/2” 7 1/8” 36” 6 3/8” 4 1/4” 4 3/4” 7. ALL INFORMATIONMIN. CONTAINED AT THE TIME #42 35,000 LPK#50 INLET HEREIN WAS 5.0" CURRENT WC 10.5" WCOF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT 1. THESE FIRE PIT MODELS ARE SHIPPED NATURAL GAS AND MUST CONVERTED TO LP GAS. 1. THESE FIRE PITAS MODELS ARE SHIPPED AS BE NATURAL GAS AND MUST BE CONVERTED TO LP GAS.

NOTES: MANUFACTURER TO BE INLET CONSIDERED ACCURATE. #50 35,000 10.5" WC 13.0" WC 2. ALL FIRE PITS REQUIRE INCHES OF CROSS FLOWMAX. VENTILATION PER SIDE OFVENTILATION ENCLOSURE.PER 2. 18-SQUARE ALL FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW SIDE OF ENCLOSURE. 1. THESE FIRE PIT ARE SHIPPED AS NATURAL GASAND ANDCOMPANY MUST BE CONVERTED TO LP GAS. 8. MODELS CONTRACTOR'S NOTE: FOR PRODUCT INFORMATION NORMAL INLET #38 7.0" WC 3. ALWAYS ADHERE45,000 TO YOUR STATE ADHERE ANDLPK#48 LOCAL CODESSTATE WHEN INSTALLING FIRE PITS . INSTALLING 3. ALWAYS TO YOUR AND LOCAL CODES WHEN FIRE11.0" PITS .WCVISIT www.CADdetails.com/info AND ENTER 2. ALL40 FIRE PITS REQUIRE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF36” ENCLOSURE. FPB-36LMT-P 1/4” 6 7/8” 40 1/2” 7 1/8” 6 3/8” 4 1/4” 4 3/4” REFERENCE NUMBER 5053-043. #48 45,000 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALLSYSTEMS GAS CONNECTIONS. 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE AS WELL AS ALL GAS CONNECTIONS. 3. ALWAYS ADHERE TO YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRE PITS . LPK#44 #32 5. DRAWINGS NOT 55,000 TO SCALE. 5. DRAWINGS NOT TO SCALE. 4. ALL FIRE PIT INSTALLATIONS SHOULD PROVIDE ACCESS TO VALVE SYSTEMS AS WELL AS ALL GAS CONNECTIONS. 6. THIS DRAWING IS INTENDED USE BYISARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 6. THISFOR DRAWING INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES #44 55,000 5. DRAWINGS NOT TO SCALE.

LINEAR SERIES

THESE FIRE P ARE TESTED ANSI Z21.97-20 CSA 2.41-201 STANDARDS

ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. ONLY. THIS DRAWING MAY NOT BE USED FOR CONSTRUCTION. 6. THIS DRAWING IS INTENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES 7. ALL INFORMATION CONTAINED HEREIN WAS CONTAINED CURRENT ATHEREIN THE TIME DEVELOPMENT BE REVIEWED AND APPROVED BY THE PRODUCT 7. ALL INFORMATION WASOFCURRENT AT THEBUT TIMEMUST OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT ONLY. THIS DRAWING MAY BELINEAR USED FOR DELS ARE SHIPPED AS NATURAL GAS AND MUST BE CONVERTED TONOT LP GAS. MTCONSTRUCTION. BURNER SYSTEMS MANUFACTURER TO BE CONSIDERED ACCURATE. MANUFACTURER TO BE CONSIDERED ACCURATE. 7. ALL INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT RE 18-SQUARE INCHES OF CROSS FLOW VENTILATION PER SIDE OF ENCLOSURE. 8. CONTRACTOR'S NOTE:8.FOR PRODUCT ANDNOTE: COMPANY INFORMATION VISIT www.CADdetails.com/info ENTER CONTRACTOR'S FOR PRODUCT AND COMPANY INFORMATION VISITAND www.CADdetails.com/info AND ENTER MANUFACTURER BE. CONSIDERED ACCURATE. YOUR STATE AND LOCAL CODES WHEN INSTALLING FIRETO PITS REVISION DATE 06/0 5053-043 REFERENCE NUMBER 5053-043. REFERENCE NUMBER 5053-043. 8. TO CONTRACTOR'S NOTE: FORAS PRODUCT COMPANY INFORMATION VISIT www.CADdetails.com/info AND ENTER LLATIONS SHOULD PROVIDE ACCESS VALVE SYSTEMS AS WELL ALL GASAND CONNECTIONS. THESE FIRE PITS THESE FIRE PITS PROTECTED BY COPYRIGHT ©2016 CADDETAILS.COM LTD. REFERENCE NUMBER 5053-043. SCALE. ARE TESTED TO ARE TESTED TO CADdetai THESE FIRE PITS CONVERSION TENDED FOR USE BY ARCHITECTS, ENGINEERS, CONTRACTORS, CONSULTANTS AND DESIGN PROFESSIONALS FOR PLANNING PURPOSES MODEL FACTORY ORIFICE BTU OUTPUT PRESSURE GAS NG / ANSI GAS TYPE LP ANSITYPE Z21.97-2014 ARE Z21.97-2014 TESTED TO / KIT PART NO. G MAY NOT BE USED FOR CONSTRUCTION. CSA 2.41-2014 CSAZ21.97-2014 2.41-2014 / ANSI ONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT BUT MUST BE REVIEWED AND APPROVED BY THE PRODUCT LINEAR MT BURNER SYSTEMS LINEAR MT BURNER SYSTEMS STANDARDS. STANDARDS. BE CONSIDERED ACCURATE. CSA 2.41-2014 MIN. INLET 5.0" WC 10.5" WC FPB-24LMT-N #42 35,000 LPK#50 LINEAR MT BURNERAND SYSTEMS E: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info ENTER REVISION DATE 06/09/2016 043 REVISIONSTANDARDS. DATE 06/09/2016 5053-043 MAX. INLET 10.5" WC 13.0" WC FPB-24LMT-P #50 35,000 R 5053-043.

BTU SPECS

GAS PRESSURE

LINEAR SERIES LINEAR SERIES LINEAR SERIES

LPK#48

EAR MT BURNERFPB-36LMT-N SYSTEMS

#32

55,000

LPK#44

FPB-36LMT-P

#44

55,000

NEAR SERIES

CADDETAILS.COM LTD.

This product can expose you to Chromium, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)

THESE FIRE PITS REVISION DATE 06/09/2016 CADdetails.com CADdetails.com NORMAL 7.0" WC 11.0" WC ARE TESTEDINLET TO CADdetails.com ANSI Z21.97-2014 / CSA 2.41-2014 DISCLAIMER: BTU LISTINGS ARE BASED ON 7.0” WC FOR STANDARDS. NATURAL GAS (NG) AND 11.0” WC FOR LIQUID PROPANE REVISION 06/09/2016 (LP)DATE AT THE BURNER ORIFICE. FLEX LINE SIZE AND PROPER GAS PIPE SIZING WILL ALSO AFFECT BTU’S. AS CADdetails.com A RESULT YOUR BTU’S MAY VARY SLIGHTLY FROM THE LISTED BTU SPECIFICATIONS.

This product can expose you to Lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. (For more information, go to www.p65warnings.ca.gov)