Issues
Solutions and Explanations
The message “Scramble signal” or “Weak Signal/No Signal” appears.
•• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.
•• If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.
◀
You turned the TV off 45 minutes ago, and it turned on again.
•• It is normal. The TV operates the OTA (Over The Aerial) function itself to
There are recurrent picture/ sound issues.
•• Check and change the signal/source.
A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture.
•• To prevent this, use felt pads on any surface of the TV that comes in
upgrade firmware downloaded whilst your watching TV.
direct contact with furniture.
English
▶